Hi,
What application is best for efficient UV, SetCPU or system tuner or pimp my cpu?
SetCPU has the limitation of 100mV UV between frequencies.
Any help guys.
Sent from my MB860 using Tapatalk
I have gone from SetCPU to System Tuner and like it better. More options to play with. SetCPU is fine though.
Assimilated via WinBorg 4G
Hey guys can any of you help me out. When I first downloaded Rom toolbox pro and went to the CPU slider I had it set to 1450 Max and 216 min. When you went to it you could see the scale go up to the Max and down to the min running full scale. Now when I go to it the number at the top will only drop down to 800 and not 216 like before.
I am running the 1.45 kernel and redpill rom
Thanks
Do you have any other CPU modifying apps (SETCPU, system tuner...) installed? And if so do u have any types of CPU profiles set up in toolbox or in other apps?
Sent from my MB860 using XDA App
No other CPU apps and I don't think I have changed any settings I don't change stuff unless I know what it does.
Sent from my MB860 using XDA App
Which CPU control apps are capable of over clocking both cores?
Sent from my PG86100 using xda premium
xblackvalorx said:
Which CPU control apps are capable of over clocking both cores?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
system tuner...
Yes sys tuner pro works pretty great. U can also set a different min/ max for each. That said if you are on the newer ota freeza has a kernal that keeps both cores active as well and then u can use system tuner to manage the min/max for both however it isn't overclockable.
I should mention that both cores actually get activated on demand by default and apps like Daemon Control, which is a nice front end for the overclocking daemon virtuous oc will actually overclock both cores as well, however CPU1 will only be active when needed. hope that makes sense.
Sent from my PG86100 using Tapatalk
About to flash Sebastian's 1.4. I was just wondering what applications people are fond of for undervolting and over clocking.
Any input would be greatly appreciated.
Thanks!
Sent from my ADR6425LVW using xda premium
System Tuner Pro.
CPU Master Pro.
SetCPU.
Sent from my ADR6425LVW using xda premium
+1 for set CPU
graybeard5 said:
+1 for set CPU
Click to expand...
Click to collapse
SetCpu doesn't seem to have the undervolt option. Unless i just can't find it. Under what tab is it?
Sent from my ADR6425LVW using Tapatalk 2
set cpu way better than everyrhinh else
sent from my lovely phone....hmmm wait its a tablet...waaa i dont really know.....im PARANOID NoW!
abby_nitewolf said:
SetCpu doesn't seem to have the undervolt option. Unless i just can't find it. Under what tab is it?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Under the voltage tab.. afaik voltage tabs only appear on the these overclocking tabs only if your kernel supports undervolting...stock kernels dont support it..
Sent from my GT-I9300 using Tapatalk 2
System Tuner
trickster2369 said:
System Tuner Pro.
CPU Master Pro.
SetCPU.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Or you could use System Tuner
SetCPU is the general go-to app for its straightforward appearance. The voltage tab sometimes does not appear even for a custom kernel with voltage tables; compatibility issues the app maker needs to correct.
Try System Tuner for an interface with a lot of other useful options and info with graphics.
Incredicontrol offers an interface similar in layout to SetCPU, and can toggle the Force Fast/AC Charge option for kernels with that have it. However, its voltage tables have had gray text on a white background for some users lately, making it a minor nuisance to read. Got the problem on my setup.
PhantasmRezound said:
SetCPU is the general go-to app for its straightforward appearance. The voltage tab sometimes does not appear even for a custom kernel with voltage tables; compatibility issues the app maker needs to correct.
Try System Tuner for an interface with a lot of other useful options and info with graphics.
Incredicontrol offers an interface similar in layout to SetCPU, and can toggle the Force Fast/AC Charge option for kernels with that have it. However, its voltage tables have had gray text on a white background for some users lately, making it a minor nuisance to read. Got the problem on my setup.
Click to expand...
Click to collapse
Just downloaded System Tuner, and the interface is amazing! So many available options!
Just wondering, what settings is everyone running for undervolting. I never had a phone which i can undervolt in so this is all new to me.
Sent from my ADR6425LVW using Tapatalk 2
abby_nitewolf said:
Just downloaded System Tuner, and the interface is amazing! So many available options!
Just wondering, what settings is everyone running for undervolting. I never had a phone which i can undervolt in so this is all new to me.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Personally do -75mV across the board typically, pushing -82.5mV testing. -50mV should be reasonable for less accomadating cores.
All depends on your own CPU quality. Don't set tables on boot or by script unless they prove stable first. Or, just redo again each boot manually to be safest.
PhantasmRezound said:
Personally do -75mV across the board typically, pushing -82.5mV testing. -50mV should be reasonable for less accomadating cores.
All depends on your own CPU quality. Don't set tables on boot or by script unless they prove stable first. Or, just redo again each boot manually to be safest.
Click to expand...
Click to collapse
I'm running - 75. Thank you
Sent from my ADR6425LVW using Tapatalk 2
I've tried SetCPU Pro, System Tuner Pro, CPU Master, ROM Toolbox, and Voltage Control with both Funky kernel and dsb's kernel. None of the programs give me any voltage settings. So am I missing something?
xdadevnube said:
I've tried SetCPU Pro, System Tuner Pro, CPU Master, ROM Toolbox, and Voltage Control with both Funky kernel and dsb's kernel. None of the programs give me any voltage settings. So am I missing something?
Click to expand...
Click to collapse
Funky kernel doesn't have adjustable voltage settings. It has a fixed -50mV undervolt. Not sure on dsb's kernel.
So for Global Sense 3.6 ROMs, what kernels will work for UV?
Shrike, good to see ya from the Charge forum. It is exciting to own a device with lots of development.
Sent from my ADR6425LVW using Tapatalk 2
xdadevnube said:
So for Global Sense 3.6 ROMs, what kernels will work for UV?
Shrike, good to see ya from the Charge forum. It is exciting to own a device with lots of development.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I'm pretty sure dsb's works, but I haven't run Sense in a month, so I couldn't tell you what apps work with it. Try IncrediContol if you haven't already.
Also, good to see you here too. I'm still trying to help them out in the Charge forum when I can, but it's getting quieter and quieter over there.
Since we now have Perseus kernel and we can tweak stuff, the cpu is easy enough to tweak. But for the gpu and voltage and charging etc... what's a good app that is compatible? I used to use STweaks with Siyah. But don't what's the best all round tweaking app
Sent from my GT-I9305 using xda app-developers app
btemtd said:
Since we now have Perseus kernel and we can tweak stuff, the cpu is easy enough to tweak. But for the gpu and voltage and charging etc... what's a good app that is compatible? I used to use STweaks with Siyah. But don't what's the best all round tweaking app
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
I use AnTuTu and Quadrant
ps cpu crashes at 1800Mhz run at 1704
They are just benchmarking programs are they not? The OP was asking about a program that allows you to tweak the rom like Xtweaks or any of the others.
narcarsiss said:
I use AnTuTu and Quadrant
ps cpu crashes at 1800Mhz run at 1704
Click to expand...
Click to collapse
Yeh I never run it at the max just for saftey precautions, I already know how to tweak the CPU i am actually talking about tweaking everything else do you know any other software like Stweaks for Siyah?
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Thanks ✟
Moving to Q&A
For GPU clocks and voltages you need to use scripts.
Sent from my GT-I9300 using xda premium
System monitor pro is pretty good
Sent from my GT-I9300 using Tapatalk 2
try SetCPU you can alter the governor and the voltage plus you can also check if the undervolt you did is stable