[Q] How to fix wifi issue - Galaxy S II Q&A, Help & Troubleshooting

Hi,
Yesterday, I have updated my SGS2 from GB(ver 2.3.5) to ICS(ver 4.0.3).
My SGS2 details are as follows:
PDA : I9100XWLP7
PHONE : I9100DDLPA
CSC : I9100DDLP9
Build info : Tue Apr 3 19:44:49 KST 2012
Model number : GT-I9100
Android version : 4.0.3
Baseband version : I9100DDLPA
Kernel version : 3.0.15-I9100XWLP7-CL340913 [email protected] #3
Build number : IML74K.XWLP7
Yesterday onward my SGS2 is not connecting to any wifi except Mobile data (Provided by sevice provided). It's detecting wifi and showing as connected and when try to browse google or android market it show "No connection"
Someone please help me :crying::crying::crying:
I have attached both the screen shot for the reference.

ravi_21 said:
Hi,
Yesterday, I have updated my SGS2 from GB(ver 2.3.5) to ICS(ver 4.0.3).
My SGS2 details are as follows:
PDA : I9100XWLP7
PHONE : I9100DDLPA
CSC : I9100DDLP9
Build info : Tue Apr 3 19:44:49 KST 2012
Model number : GT-I9100
Android version : 4.0.3
Baseband version : I9100DDLPA
Kernel version : 3.0.15-I9100XWLP7-CL340913 [email protected] #3
Build number : IML74K.XWLP7
Yesterday onward my SGS2 is not connecting to any wifi except Mobile data (Provided by sevice provided). It's detecting wifi and showing as connected and when try to browse google or android market it show "No connection"
Someone please help me :crying::crying::crying:
I have attached both the screen shot for the reference.
Click to expand...
Click to collapse
- First try to turn off the energy save mode (at least for test)
- Checked if other device have inet? (Maybe router doesn't send anything)
- Then u can try to slash an other kernel.
- Last think, reflash!
CHEERS

reset restart router first and check
if you have any important data save it and do a factory wipe
dial *2767*3855#
this should fix the issue, if not flash the rom again.

atifsh said:
reset restart router first and check
if you have any important data save it and do a factory wipe
dial *2767*3855#
this should fix the issue, if not flash the rom again.
Click to expand...
Click to collapse
I can connect to google or even to android market by my both the laptop with modem (wifi enabled) only problam with my SGS2

ravi_21 said:
I can connect to google or even to android market by my both the laptop with modem (wifi enabled) only problam with my SGS2
Click to expand...
Click to collapse
So check my other 3 points

Hannibal226 said:
So check my other 3 points
Click to expand...
Click to collapse
Could you please provide link for a GOOD ROM for indian edition with ROOT file :laugh:

ravi_21 said:
Could you please provide link for a GOOD ROM for indian edition with ROOT file :laugh:
Click to expand...
Click to collapse
Here a short guide:
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel (http://forum.xda-developers.com/showthread.php?t=1103399)
-- just scroll down and search for ur version (LP7)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Then start phone in recovery mode (Vol+, Home and Powerbutton)
5) Check if u have enough space for backup on sd card (to be sure: 2GB)
6) Go to:
-- Backup and restore
-- Backup to internal sd card
-- confirm it and then let do the phone the backup (can take a while [5-20 min])
U r done with Backup!!!
Now start the process for ICS.
If u want a Custom Rom:
1) Choose one and download (I use SensatioN but have to choose for urself)
2) Put it on internal sd card
3) Go into recovery mode (see above)
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u copy it to PC, too if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom via recovery
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
CHEERS

Thanks :good:
I will try and will let know you :fingers-crossed:

Could you please provide link for "Custom Rom" (Indian edition please)

ravi_21 said:
Could you please provide link for "Custom Rom" (Indian edition please)
Click to expand...
Click to collapse
I would be pleased to help but this I can't answere...
Romanian and arabic are typically qustions but indian... hmmm
But maybe u ask this mate here, a really nice guy also from india
He also made his own MIUI version....
http://forum.xda-developers.com/member.php?u=4302669
CHEERS

Still not able to connect. Getting availble network with moderate to good strength but no luck.:crying::crying::crying:

it might have to do with your security setting for the network, I think it only works on WEP or something, you can try changing the password and all that :O

Hannibal226 said:
Here a short guide:
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel (http://forum.xda-developers.com/showthread.php?t=1103399)
-- just scroll down and search for ur version (LP7)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Then start phone in recovery mode (Vol+, Home and Powerbutton)
5) Check if u have enough space for backup on sd card (to be sure: 2GB)
6) Go to:
-- Backup and restore
-- Backup to internal sd card
-- confirm it and then let do the phone the backup (can take a while [5-20 min])
U r done with Backup!!!
Now start the process for ICS.
If u want a Custom Rom:
1) Choose one and download (I use SensatioN but have to choose for urself)
2) Put it on internal sd card
3) Go into recovery mode (see above)
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u copy it to PC, too if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom via recovery
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
CHEERS
Click to expand...
Click to collapse
Afterdoing all as mentioned above still nothing works for me so i went back to GB. Now worst condition intially my SGS2 was detecting availble network but now NOT detecting any network even in my office i have TWO excellent range wifi network available.
Refere screen shot for GB

Solved "How to fix wifi issue"
Using "Wifi Fixer" and my wifi is working like before :laugh::laugh::laugh:

ravi_21 said:
Hi,
Yesterday, I have updated my SGS2 from GB(ver 2.3.5) to ICS(ver 4.0.3).
My SGS2 details are as follows:
PDA : I9100XWLP7
PHONE : I9100DDLPA
CSC : I9100DDLP9
Build info : Tue Apr 3 19:44:49 KST 2012
Model number : GT-I9100
Android version : 4.0.3
Baseband version : I9100DDLPA
Kernel version : 3.0.15-I9100XWLP7-CL340913 [email protected] #3
Build number : IML74K.XWLP7
Yesterday onward my SGS2 is not connecting to any wifi except Mobile data (Provided by sevice provided). It's detecting wifi and showing as connected and when try to browse google or android market it show "No connection"
Someone please help me :crying::crying::crying:
I have attached both the screen shot for the reference.
Click to expand...
Click to collapse
Solution to you problem is here
Google this String, i can post links on here as i'm new user
[SOLUTION] Galaxy S2 ICS 4.0.3 IP Address: Unavailable / WiFi Connection Problem
Enjoy!

Related

[Q] Root Access after upgarde to ICS

Hello ..
Firstly I am very much new to this sort of phone ..even new at Android..need some assistance from fellow experts
I got a Galaxy S II set . Assuming its already rooted (coz I found SuperUser apps already exists)
The set running on GB , will upgrade to ICS shortly . now need to know .
Since I am new - I will update to ICS using kies from Samsung site . official update
After update Superuser will continue to work ? means root access will be remain the same?
-Also I am planning to install bellow application , pls advice ur expert opinion
* Juice Defender.
* Automate it.
* Titanium Backup
pls advice if there any software needed to boost up the performance & battery life.
Looking forward to have some good advice
Best Rgds-
Nneel.
As u r updating through kies root will not remain. U hv to root again will siyah or dorimanx kernel. To increase performence u cn overclock using any clocking app from play store. Anyway we xant beliv kies. I recomend odin.
Hit thanks if I helped.....
Sent from my GT-I9100 using xda premium
Unzip the file
Download and open Odin 3 then put the phone into download mode (Home+power+vol down)
- Connect phone and wait until you get a yellow sign in Odin.
Add CODE_I9100XXXXX.tar to PDA
Then Add MODEM_I9100XXXXX.tar to PHONE then Add CSC_HOME_NEE _I9100XXXXX.tar to CSC
Then hit Start. Then wait for few min. Then your phone will restart.
ENJOY.
Sent from my GT-I9100 using xda premium
Hmmm,there is a app called mobile odin pro.......and it has everoot button for a reason.
Sent from my GT-I9100 using xda premium
Nneel said:
Hi Robin..thnx
I have this file called " I9100XWLPX_I9100XXLQ6_I9100NEELP5_HOME.tar.md5" & " SS_DL.dll " - only this 2 fie inside .zip archie
do i need to Rename the file ? ..or there are any other archive I need to download ..
Hope I am not bothering u ..pls
Rgds-
Nneel
Click to expand...
Click to collapse
just put the "I9100XWLPX_I9100XXLQ6_I9100NEELP5_HOME.tar.md5" under "PDA" in ODIN and flash it
do not use the other file and also ensure 'USB Debugging' mode is enabled in settings before flash
Sun90 said:
just put the "I9100XWLPX_I9100XXLQ6_I9100NEELP5_HOME.tar.md5" under "PDA" in ODIN and flash it
do not use the other file and also ensure 'USB Debugging' mode is enabled in settings before flash
Click to expand...
Click to collapse
Hi Sun.
Excuse me - I need to know a bit more if u would ..
I forget to mention few things-
- I did a factory reset of MY SGSII
- I format SD Card & Stroage ,Also Delete all the folder located at sd card & stroage
- Still I Super user App is there ..but no application is listed under it.
==> Pls advice still ROOT access is there after what I have done?
kindly advice - what do mean by Flash & USE Debugging mode ?
is Odin screen - AUto Reboot & F.Reset time - is checked
is Flash means = Start Button
USE debugging mode = download mode (Home+power+vol down)
pls correct me if I am wrong ?
I new ..very much new to it..hope im not bothering u
Rgds/NNeel
Nneel said:
Hi Sun.
Excuse me - I need to know a bit more if u would ..
I forget to mention few things-
- I did a factory reset of MY SGSII
- I format SD Card & Stroage ,Also Delete all the folder located at sd card & stroage
- Still I Super user App is there ..but no application is listed under it.
==> Pls advice still ROOT access is there after what I have done?
kindly advice - what do mean by Flash & USE Debugging mode ?
is Odin screen - AUto Reboot & F.Reset time - is checked
is Flash means = Start Button
USE debugging mode = download mode (Home+power+vol down)
pls correct me if I am wrong ?
I new ..very much new to it..hope im not bothering u
Rgds/NNeel
Click to expand...
Click to collapse
Debugging mode is an option in settings, developer options, USB Debugging mode. You have only to tick it.
In Odin leave that 2 option checked; you have only to PUT the ROM file at PDA, put your phone in download mode and connect it to he PC when you see Added in Odin hit Start.
Thnx Mate.
but i need to be confirmed bellow point
- I did a factory reset of MY SGSII
- I format SD Card & Stroage ,Also Delete all the folder located at sd card & stroage
- Still I Super user App is there ..but no application is listed under it.
Still ROOT Access is okay?
can u pls confrim..
Rgds/Nneel

[Q] unknown tablet ROM Flash plz Help

hello
I have Bharat Electronics Limited company's Tablet known as BELTab and unfortunately i don't have any kind support from their side.
I HAVE Attached A FILE Of SYSTEM SPECIFICATION which i get from one application other wise i am unable to get any kind of system specs
A small intro to my tablet shown in my settings > about Tablet option
Android Version = Android 2.2
Model number = BELTab
Kernel Version = 2.6.32 [email protected]#1
Base Band Version = Unknown
Build number = BELTab.Version2.10-10-2011
It has
1. Wifi --> Not Working
2. Bluetooth --> Not Working
3. Ethernet --> Working
4. Simcard / Phone options --> Not Available
5. USB --> 2 Slots Working ( in 1 slot i m using keyboard )
6. Memory Card Slot --> 1 SD Card Slot
7. Headphone & Mic --> YES 1 slot for Headphone 1 slot for mic
8. Buttons --> 1 power button 1 back button
9. Hard Reset --> Yes Available
10. Touch screen type --> Resistive touch ( i guess)
Other info u can find in Attached File.
I want to flash new ROM because there are too many problems in current ROM that i came to know
Problems :
1. Force closes on mostly all tabs in "about tablet" section so cant get information
2. Force closes on so many applications
3. Can't Use WIFI and Bluetooth getting message showing "Error" as error text nothing in description
I have rooted it using application z4root and installed busybox and superuser but cant find my model in rommanager so cant get backup of current rom and cant install the new ROM
Help plz
http://www.beatcity.co.uk/bel-india-releases-cheapest-tab/
Use the holly google.
Tried Google but cant find solution :/
globula_neagra said:
http://www.beatcity.co.uk/bel-india-releases-cheapest-tab/
Use the holly google.
Click to expand...
Click to collapse
Tried Google but cant find solution :crying:
Bump plz help
Sent from my Hero using xda app-developers app

[FIXED] No SIM card detected after installing new ROM

Hello,
I probably did some mistake which I don't know how to solve.
After I installed a new ROM I get message „Slot 1: No SIM card detected“, „Slot 2: No SIM card detected“.
„SIM management“ is inoperable, „Sim Toolkit“ can't launch because it cann't detect SIM card.
Calling emergency number gets „Out of service area“.
Everything else works just fine (including WiFi) except I can't get SIM card to work and get signal.
Information about the phone:
FEITENG GT H9500
Android version 4.2.1
Baseband version MOLY.WR8.W1248.MD.WG.MP.V6.P4
Kernel version 3.4.5 [email protected] #1
Build number drx_0.1
I have both IMEIs and IMEI VS visible
CWM v6.0.2.8
What I did prior to loss of SIM card functionality:
- Made backup of „user data“, cca. 350MB
- Rooted the phone using instructions as follows:
1.Download usb driver ----> mirrorcreator.com/files/RJDKYXRH/ and open Driver_Auto_Installer_v1.1236.00.rar and run install.bat it install driver automatically
2. Plug your phone to pc
3.Download this file ----> mirrorcreator.com/files/09XPAELB open Motochopper_Auto_Root.rar and run run.bat your phone has root
(Quote: lagania)
- Downloaded ROM update FEITENG H9500 - Update - 06/01/2013 and Recovery from:
needrom.com/mobile/feiteng-h9500-3/
- Followed instructions:
Unpack FlashTools, and Click on Flash_tool.exe
Select a the MT6589_Android_scatter_emmc.txt in Recovery
Turn off your phone, remove the battery.
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear after color purple, yellow.
And green circles display
- Installed ROM from SD card ( in CWM)
- NOTE: I downloaded only update file H9500_DRX_03, and in „Flashtool“ only „Recovery" option was checked. I don't remember was the SIM card inside during installation of the ROM (probably wasn't).
- FlashTool V3.1252.1.sn104
- I installed that ROM with most of its options and wiped data and cache before installation.
- ROM got installed and after restart I lost SIM card visibility.
- No external damage was done to SIM slot.
What I tried to fix it:
- Tried different SIM cards from anothers phones
- Tried my SIM card on other phones to make sure that it works
- Format eMMC
- At „factory mode“ Detect SIM test failed
- Did wipe data/cache several times before and during attempts to install different roms
- Tried installing another ROMs (with SIM card in and without), all with „clean install“.
- During installation (download and upgrade) of ROMs from FlashTool selected all options (preloader,mbr,ebr1,uboot etc.)
- Tried installing „original“ ROM from: needrom.com/mobile/feiteng-h9500
However it said „Installation aborted“ but I see the ROM was installed.
- I have only saved /acct , /mnt , /system from old system that work
What I did wrong from what I know:
- I didn't backed up old ROM that I got with my phone
- I did „Download“ with update ROM v3 and not the initial version
- I didn't do „download“ the first version and then „Upgrade“ the rest of upgrades (I don't know is that relevant)
- I did not selected all options (preloader,mbr,ebr1,uboot etc.) in Flashtool except for „recovery“ when I first installed the ROM if that is relevant
So, I don't konw is there any relevant information I can provide since I honestly don't know what can be relevant and what not.
Is there something that can help with this?
FIXED:
movilesdualsim.com/threads/rom-drx-v0-4-jb-4-2-1-feiteng-h9500-star-n9500.32072/
That is Spanish page, I don't know Spanish, I never translated it completely. There is one line where it points out that there are some problems with loader and recovery so they made modification. I Applyed modification "Actualización rom base" ... uploaded DRX4 and it worked like charm.
Apologies for not posting direct links, it isn't allowed for new members.
Is it an Add-on??
Hey,Is it an add-on or rom or somthing else???
I'm new to these things so just asking.
Also, does it work in every ROM??
works for sony xperia M?
I have installed lollipop rom for micromax A63 but in that process i cleared imei no & my sim is not detectable i tried no of solution but it could not be restored ?
Install chameleon app from play store and use it to write ur previous imei's .. After that the sim works in ur phone perfectly...
chamelephon app not working please me.
Can u share the file u got in spanish page. ?
Oscillator098 said:
Hello,
I probably did some mistake which I don't know how to solve.
After I installed a new ROM I get message „Slot 1: No SIM card detected“, „Slot 2: No SIM card detected“.
„SIM management“ is inoperable, „Sim Toolkit“ can't launch because it cann't detect SIM card.
Calling emergency number gets „Out of service area“.
Everything else works just fine (including WiFi) except I can't get SIM card to work and get signal.
Information about the phone:
FEITENG GT H9500
Android version 4.2.1
Baseband version MOLY.WR8.W1248.MD.WG.MP.V6.P4
Kernel version 3.4.5 [email protected] #1
Build number drx_0.1
I have both IMEIs and IMEI VS visible
CWM v6.0.2.8
What I did prior to loss of SIM card functionality:
- Made backup of „user data“, cca. 350MB
- Rooted the phone using instructions as follows:
1.Download usb driver ----> mirrorcreator.com/files/RJDKYXRH/ and open Driver_Auto_Installer_v1.1236.00.rar and run install.bat it install driver automatically
2. Plug your phone to pc
3.Download this file ----> mirrorcreator.com/files/09XPAELB open Motochopper_Auto_Root.rar and run run.bat your phone has root
(Quote: lagania)
- Downloaded ROM update FEITENG H9500 - Update - 06/01/2013 and Recovery from:
needrom.com/mobile/feiteng-h9500-3/
- Followed instructions:
Unpack FlashTools, and Click on Flash_tool.exe
Select a the MT6589_Android_scatter_emmc.txt in Recovery
Turn off your phone, remove the battery.
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear after color purple, yellow.
And green circles display
- Installed ROM from SD card ( in CWM)
- NOTE: I downloaded only update file H9500_DRX_03, and in „Flashtool“ only „Recovery" option was checked. I don't remember was the SIM card inside during installation of the ROM (probably wasn't).
- FlashTool V3.1252.1.sn104
- I installed that ROM with most of its options and wiped data and cache before installation.
- ROM got installed and after restart I lost SIM card visibility.
- No external damage was done to SIM slot.
What I tried to fix it:
- Tried different SIM cards from anothers phones
- Tried my SIM card on other phones to make sure that it works
- Format eMMC
- At „factory mode“ Detect SIM test failed
- Did wipe data/cache several times before and during attempts to install different roms
- Tried installing another ROMs (with SIM card in and without), all with „clean install“.
- During installation (download and upgrade) of ROMs from FlashTool selected all options (preloader,mbr,ebr1,uboot etc.)
- Tried installing „original“ ROM from: needrom.com/mobile/feiteng-h9500
However it said „Installation aborted“ but I see the ROM was installed.
- I have only saved /acct , /mnt , /system from old system that work
What I did wrong from what I know:
- I didn't backed up old ROM that I got with my phone
- I did „Download“ with update ROM v3 and not the initial version
- I didn't do „download“ the first version and then „Upgrade“ the rest of upgrades (I don't know is that relevant)
- I did not selected all options (preloader,mbr,ebr1,uboot etc.) in Flashtool except for „recovery“ when I first installed the ROM if that is relevant
So, I don't konw is there any relevant information I can provide since I honestly don't know what can be relevant and what not.
Is there something that can help with this?
FIXED:
movilesdualsim.com/threads/rom-drx-v0-4-jb-4-2-1-feiteng-h9500-star-n9500.32072/
That is Spanish page, I don't know Spanish, I never translated it completely. There is one line where it points out that there are some problems with loader and recovery so they made modification. I Applyed modification "Actualización rom base" ... uploaded DRX4 and it worked like charm.
Apologies for not posting direct links, it isn't allowed for new members.
Click to expand...
Click to collapse
Can u share the file u got in spaninsh page. as the file got deleted from source.

samsung galaxy star pro duos internal memory problem

cant take a screenshot even
when connected to pc shows -1095600bytes
and many more problems related to internal memory
please help asap..
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your specific device forum here (bookmark/subscribe this):
Samsung Galaxy Star
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Galaxy Star Q&A, Help & Troubleshooting
Good luck!
hello everyone
I am using samsung galaxy star pro gt s7262
i think i bricked my phone when I was using swapper2..( i tried to create swap file and path for that was my internal sd card )
I don't know what exactly happened but here are some of suspicious apps from my device
swapper 2
Ram Expander
lucky patcher
xposed framework
Link2Sd
one of these caused this thing....
well,
1. Now Im getting update device information, a yellow colored message that covers center of the screen and it keeps flashing on screen constantly. THIS IS HOW IT LOOKS -->
PDA : S7262XXUAND5
Phone : S7262XXUAMK2
CSC : S7262ODDANA1
H/W :
RF CAL DATE : UNKNOWN
UN : CN5085A76C49790
REAR CAM : SR200PC20M NA
TSP : Zl122207 Zl122207
TSK :Zl122207 Zl122207
CH : NA
UART : NA, USB : NA
2. Internal storage is not visible (cant mount sdcard, cant mount efs in cwm)
3. cant connect to mtkdroid / adb shell (only odin detects my device... )
3. Most important no network, no wifi, no bluetooth, no mobile data
I can still listen to music though, other apps are working fine...
Things I tried :
1. flashing my stock rom using odin 3.07
-> not working
2. used pit (logan2g.pit)
-> not working
3. Im using cwm 6.0 touch recovery, wiped everything possible..
-> not working
is there any way i can recover this thing...
ANY APP
ANY TOOL
Thanks for any kind of Help..
princebh said:
cant take a screenshot even
when connected to pc shows -1095600bytes
and many more problems related to internal memory
please help asap..
Click to expand...
Click to collapse
do u know how to flash stock rom through Odin?
---------- Post added at 10:41 PM ---------- Previous post was at 10:39 PM ----------
Sam996 said:
hello everyone
I am using samsung galaxy star pro gt s7262
i think i bricked my phone when I was using swapper2..( i tried to create swap file and path for that was my internal sd card )
I don't know what exactly happened but here are some of suspicious apps from my device
swapper 2
Ram Expander
lucky patcher
xposed framework
Link2Sd
one of these caused this thing....
well,
1. Now Im getting update device information, a yellow colored message that covers center of the screen and it keeps flashing on screen constantly. THIS IS HOW IT LOOKS -->
PDA : S7262XXUAND5
Phone : S7262XXUAMK2
CSC : S7262ODDANA1
H/W :
RF CAL DATE : UNKNOWN
UN : CN5085A76C49790
REAR CAM : SR200PC20M NA
TSP : Zl122207 Zl122207
TSK :Zl122207 Zl122207
CH : NA
UART : NA, USB : NA
2. Internal storage is not visible (cant mount sdcard, cant mount efs in cwm)
3. cant connect to mtkdroid / adb shell (only odin detects my device... )
3. Most important no network, no wifi, no bluetooth, no mobile data
I can still listen to music though, other apps are working fine...
Things I tried :
1. flashing my stock rom using odin 3.07
-> not working
2. used pit (logan2g.pit)
-> not working
3. Im using cwm 6.0 touch recovery, wiped everything possible..
-> not working
is there any way i can recover this thing...
ANY APP
ANY TOOL
Thanks for any kind of Help..
Click to expand...
Click to collapse
did u installed correct device driver?
ODIN needs correct device driver to work.
princebh said:
cant take a screenshot even
when connected to pc shows -1095600bytes
and many more problems related to internal memory
please help asap..
Click to expand...
Click to collapse
hey my friend i think this problem cuz the EFS and Modem are deleted. extract this file (EFS-Fix-7amza.tar.md5.zip) i attach it to u then flash it with odin and the problem will be fixed.
Sam996 said:
hello everyone
I am using samsung galaxy star pro gt s7262
i think i bricked my phone when I was using swapper2..( i tried to create swap file and path for that was my internal sd card )
I don't know what exactly happened but here are some of suspicious apps from my device
swapper 2
Ram Expander
lucky patcher
xposed framework
Link2Sd
one of these caused this thing....
well,
1. Now Im getting update device information, a yellow colored message that covers center of the screen and it keeps flashing on screen constantly. THIS IS HOW IT LOOKS -->
PDA : S7262XXUAND5
Phone : S7262XXUAMK2
CSC : S7262ODDANA1
H/W :
RF CAL DATE : UNKNOWN
UN : CN5085A76C49790
REAR CAM : SR200PC20M NA
TSP : Zl122207 Zl122207
TSK :Zl122207 Zl122207
CH : NA
UART : NA, USB : NA
2. Internal storage is not visible (cant mount sdcard, cant mount efs in cwm)
3. cant connect to mtkdroid / adb shell (only odin detects my device... )
3. Most important no network, no wifi, no bluetooth, no mobile data
I can still listen to music though, other apps are working fine...
Things I tried :
1. flashing my stock rom using odin 3.07
-> not working
2. used pit (logan2g.pit)
-> not working
3. Im using cwm 6.0 touch recovery, wiped everything possible..
-> not working
is there any way i can recover this thing...
ANY APP
ANY TOOL
Thanks for any kind of Help..
Click to expand...
Click to collapse
instead of CWM recovery use TWRP recovery :
download this version first
link: https://forum.xda-developers.com/ga...p-team-win-recovery-project-v2-6-3-0-t3114966
then after u flash it via odin flash this latest version of twrp recovery
link:https://forum.xda-developers.com/galaxy-star/development/official-twrp-3-0-2-0-t3385730
then go to TWRP recovery and make a full wipe: (go to wipe > advanced wipe > then select system,data,cache,and internal storage) and then boot to download mode and flash your stock based rom via odin and every thing will work again
S7262
hamzaeid said:
hey my friend i think this problem cuz the EFS and Modem are deleted. extract this file (EFS-Fix-7amza.tar.md5.zip) i attach it to u then flash it with odin and the problem will be fixed.
Click to expand...
Click to collapse
Hi. Can i ask where Should I put this file You gave in odin? Because when I put the file in every section it says binary is unvalid.

Lenovo Yoga 10HD+ B8080-H/F 3G&Wifi/Return to Stock JB 4.3/

Hey guys i just wanna share how i solved my lenovo yoga problem with broken partition after rooting the tablet,i haved troubles with installing apps and use them,tablet its just goes reboot and its continues about 10 or more restarts,so fixed this when i returned to stock i searched here on xda i dont finded any stuff about this and i decided to share
First memory card is required if you dont have it will not work! So get memory card at least 4GB.
INSTRUCTIONS
-----------------------
1.Boot into Android normally.
2.Connect your phone to your PC/Laptop with a USB cable and when asked (or in USB connection settings), please select USB Mass storage mode to mount SD card.
3.Unzip the downloaded archive.
4.Copy "sdfuse" folder from archive to SD card.
Note: Please make sure that your phone has atleast 60% power before attempting or beginning upgrade. Or keep charger connected during the process.
:cyclops: SD card upgrade process:
Long press VOL UP + POWER_KEY to enter the droidboot,
A menu will appear. Select the fourth option, SDUPDATE.
At the bottom of the screen, you can see the progress and status of the update
When you see the message "SDCARD UPDATE SUCCESS!!!", this means you successfully completed the upgrade process
Now, reboot your device and hopefully it should be updated. You will have Jelly Bean 4.3 :highfive:
When it boots go to contacts type on new cotact name this code ####6020# then select your region! You must do this to get new update to KitKat,if you not it will show you that you dont have updates.
Sorry for my BAD english! :silly:
EUROPE VERSION with 3G ! Download Stock ROM for 3G version! /MEGA/ 860Mb:good:
I think for the Wi-Fi version it will be the same way so here is the link for Wi-fi
Download Stock ROM for Wifi version /Yandex/ 805Mb
hey thanks a bunch for that.! I have a B8080F wifi only model, currentlyrooted on 4.42, but it is a Chinese ROM ( build B8080_S102208_140918_PRC_wifi). can I use this?
Currently living in China but will be moving soon so looking for international rom .
yipeeyiho said:
hey thanks a bunch for that.! I have a B8080F wifi only model, currentlyrooted on 4.42, but it is a Chinese ROM ( build B8080_S102208_140918_PRC_wifi). can I use this?
Currently living in China but will be moving soon so looking for international rom .
Click to expand...
Click to collapse
This is for all version i think.
When it boots go to contacts type on new cotact name this code ####6020# then select your region! I think that will do the job when you select your region
Download Stock ROM for 3G version! /MEGA/ 860Mb it is not available ! Where can I download it ?
when I type ####6020#, it says: Attention Error! Do not have easyimage.zip
[email protected] said:
Download Stock ROM for 3G version! /MEGA/ 860Mb it is not available ! Where can I download it ?
Click to expand...
Click to collapse

Categories

Resources