Related
Hello. I've been looking everywhere and I could not find a STOCK ROM for my Coby Kyros MID1125-4G. It happens that I installed ICS from Coby germany, but that slowed the tablet and has many problems with the WIFI, then updated via OTA to JellyBean and the thing was worse. Now I want to return to Gingerbread, but I don't have the stock image. Any of you have a STOCK ROM for this device? I will be very grateful for your help.
goldgil2 said:
Hello. I've been looking everywhere and I could not find a STOCK ROM for my Coby Kyros MID1125-4G. It happens that I installed ICS from Coby germany, but that slowed the tablet and has many problems with the WIFI, then updated via OTA to JellyBean and the thing was worse. Now I want to return to Gingerbread, but I don't have the stock image. Any of you have a STOCK ROM for this device? I will be very grateful for your help.
Click to expand...
Click to collapse
I think I've done pretty much the same as you....my tablet doesn't seem too bad...a bit glitchy maybe but I have no access to the APN settings meaning I can't use 3g. I'm hunting for answers as well.....if you find out anything before me let me know (and vice versa) :fingers-crossed:
I am glad im not the only one been trying to work out how to get the 4g sim card bit working again for the past few months since I did the update to ICS, was hoping the the update to Jellybean would fix it, tho I have a thought about the update if it helps that is when it downloads the update from the coby site it is downloading for the standard 1125 and not the 1125-4g model.
If i find out a solution or any more will let you know.
Solution
DNO1978 said:
I think I've done pretty much the same as you....my tablet doesn't seem too bad...a bit glitchy maybe but I have no access to the APN settings meaning I can't use 3g. I'm hunting for answers as well.....if you find out anything before me let me know (and vice versa) :fingers-crossed:
Click to expand...
Click to collapse
After hours of seraching on the net I now have my kyros 1125-3g back to 2.3.3 and with 3g support
I have uploaded the files needed to hxxp://kaosmad.com/android/mid1125/1125-3g.zip
There is a pdf file with instructions in the zip file but basically this is what you need to do,
0 make sure coby is turned off
1 - unzip the file
2 - install the drivers from the drivers folder (depending on your operating system)
3 - start the program FWDN_V7_v2.13
4 - click on the '...' button
5 - click on files types and change it to all files
6 - select lk.rom and MTD.img and click on open
7 - click on add files
8 - turn on coby by pushing the on button whilst holding the volume up button for at least 8 seconds, till the coby screen says plug in usb cable
9 - plub in usb cable
10 - wait for windows to finish detecting / installing drivers
11 - the FWDN software should now see the coby and show the memory allocation layout on the right side of the software.
12 - click on NAND Data from the block on the right and create file NAND Data.fai
13 - click on start
14 - wait while coby is updated
15 - when the screen says download complete (turns green) disconnect the usb cable
16 - reset the coby using the reset whole on the side with a paperclip or something else that fits in the whole.
17 - Coby should now be back to factory rom
Hope this is of some help
kaosmad said:
After hours of seraching on the net I now have my kyros 1125-3g back to 2.3.3 and with 3g support
I have uploaded the files needed to hxxp://kaosmad.com/android/mid1125/1125-3g.zip
There is a pdf file with instructions in the zip file but basically this is what you need to do,
0 make sure coby is turned off
1 - unzip the file
2 - install the drivers from the drivers folder (depending on your operating system)
3 - start the program FWDN_V7_v2.13
4 - click on the '...' button
5 - click on files types and change it to all files
6 - select lk.rom and MTD.img and click on open
7 - click on add files
8 - turn on coby by pushing the on button whilst holding the volume up button for at least 8 seconds, till the coby screen says plug in usb cable
9 - plub in usb cable
10 - wait for windows to finish detecting / installing drivers
11 - the FWDN software should now see the coby and show the memory allocation layout on the right side of the software.
12 - click on NAND Data from the block on the right and create file NAND Data.fai
13 - click on start
14 - wait while coby is updated
15 - when the screen says download complete (turns green) disconnect the usb cable
16 - reset the coby using the reset whole on the side with a paperclip or something else that fits in the whole.
17 - Coby should now be back to factory rom
Hope this is of some help
Click to expand...
Click to collapse
Thx for all the great info so far. It allowed me to make my bricked
tablet work again however it seems that I also have problem of the
"Damaged Nand". this message is preventing me from installing CWM after the recovery and
also upgrading to the latest ICS update provided by Coby.
Do you have any idea how to fix this ?? :crying:
Alora said:
Thx for all the great info so far. It allowed me to make my bricked
tablet work again however it seems that I also have problem of the
"Damaged Nand". this message is preventing me from installing CWM after the recovery and
also upgrading to the latest ICS update provided by Coby.
Do you have any idea how to fix this ?? :crying:
Click to expand...
Click to collapse
From what I have read at various places you need to reformat the NAND (internal sd storage) and scan it for errors, this is a know fault as nands like hard drives can have bad sectors, which they write out when originally getting them ready for sale.
Most people recommend hxxp://panasonic.jp/support/global/cs/sd/download/index.html SD Formatter v3 to format it, obviously the coby has to be plugged into your computer to format it.
One note if you have the 3g version of the 1125 with the sim card slot using the coby germany upgrade to ics (or now updated to jellybean) using the updater on their site you wont be able to use the internal 3g sim card slot, this is a known problem to them and they are working on it.
If you need any more help just ask
kaosmad said:
From what I have read at various places you need to reformat the NAND (internal sd storage) and scan it for errors, this is a know fault as nands like hard drives can have bad sectors, which they write out when originally getting them ready for sale.
Most people recommend hxxp://panasonic.jp/support/global/cs/sd/download/index.html SD Formatter v3 to format it, obviously the coby has to be plugged into your computer to format it.
One note if you have the 3g version of the 1125 with the sim card slot using the coby germany upgrade to ics (or now updated to jellybean) using the updater on their site you wont be able to use the internal 3g sim card slot, this is a known problem to them and they are working on it.
If you need any more help just ask
Click to expand...
Click to collapse
Hmm I have dowloaded the SD Formatter 3.1 but it only formates the NAND memory ( flash erase is not suported ) i dont know how to scan for errors, also in FWDN it shows me that the NAND data is:
NAND DATA
( 3235840KB )
Is this ok ?
Also I want to let you know that the original coby germany upgrade to ics I can use the internal 3g sim card slot
I have now the update to ICS but now I dont know how to root and put the market on it, to bad
Did you guys have any luck trying to get APN settings working on your tablet, i mean with the 4.1.1. on?
sorry for my bad english
Is these instructions and the ROM for the 1125 without 3g usable?
If not, is there a tutorial for it and a stock ROM?
To explain:
I must have deleted important files in memory and can't run it any longer. it can not be started.
It is rooted. I would now like to re-flash.
How to get the 1125 in the CWM?
Yes, you can use it. I have also used it to come back to GB.
Alora said:
Thx for all the great info so far. It allowed me to make my bricked
tablet work again however it seems that I also have problem of the
"Damaged Nand". this message is preventing me from installing CWM after the recovery and
also upgrading to the latest ICS update provided by Coby.
Do you have any idea how to fix this ?? :crying:
Click to expand...
Click to collapse
Hi ! I also have the same problem on my MID1125 (without 3G)
...> Damaged NAND.
I forgot to make Step 12 :
12 - click on NAND Data from the block on the right and create file NAND Data.fai
As i read on the internet, the Data.fai File contains the Parition Layout for the NAND Flash. Can someone can make a Data.fai File from his MID1125 Tablet ?
If you do the downgrade steps until step 12, the tablet will not be flashed !
Thank you...
Please, help me. Kyros MID1126.
Hello, my Kyros is a 1126, I realized the process suggested by Kaosmad, but with the rom the Kyros 1125. And it worked, but the format does not match the screen, the touch does not work and some other buttons, I need these files for Kyros 1126, where the "lk.rom" and "mtd.img" if someone can help me , because I can only alert by FWDN_v7 program. From now on, thank you.
Thanks!
kaosmad said:
After hours of seraching on the net I now have my kyros 1125-3g back to 2.3.3 and with 3g support
I have uploaded the files needed to hxxp://kaosmad.com/android/mid1125/1125-3g.zip
There is a pdf file with instructions in the zip file but basically this is what you need to do,
0 make sure coby is turned off
1 - unzip the file
2 - install the drivers from the drivers folder (depending on your operating system)
3 - start the program FWDN_V7_v2.13
4 - click on the '...' button
5 - click on files types and change it to all files
6 - select lk.rom and MTD.img and click on open
7 - click on add files
8 - turn on coby by pushing the on button whilst holding the volume up button for at least 8 seconds, till the coby screen says plug in usb cable
9 - plub in usb cable
10 - wait for windows to finish detecting / installing drivers
11 - the FWDN software should now see the coby and show the memory allocation layout on the right side of the software.
12 - click on NAND Data from the block on the right and create file NAND Data.fai
13 - click on start
14 - wait while coby is updated
15 - when the screen says download complete (turns green) disconnect the usb cable
16 - reset the coby using the reset whole on the side with a paperclip or something else that fits in the whole.
17 - Coby should now be back to factory rom
Hope this is of some help
Click to expand...
Click to collapse
The restore went exactly as you described. I loaded the x86 drivers on my W7 PC. Great instructions and many thanks! Jim
correction to error after install
kaosmad said:
After hours of seraching on the net I now have my kyros 1125-3g back to 2.3.3 and with 3g support
I have uploaded the files needed to hxxp://kaosmad.com/android/mid1125/1125-3g.zip
There is a pdf file with instructions in the zip file but basically this is what you need to do,
0 make sure coby is turned off
1 - unzip the file
2 - install the drivers from the drivers folder (depending on your operating system)
3 - start the program FWDN_V7_v2.13
4 - click on the '...' button
5 - click on files types and change it to all files
6 - select lk.rom and MTD.img and click on open
7 - click on add files
8 - turn on coby by pushing the on button whilst holding the volume up button for at least 8 seconds, till the coby screen says plug in usb cable
9 - plub in usb cable
10 - wait for windows to finish detecting / installing drivers
11 - the FWDN software should now see the coby and show the memory allocation layout on the right side of the software.
12 - click on NAND Data from the block on the right and create file NAND Data.fai
13 - click on start
14 - wait while coby is updated
15 - when the screen says download complete (turns green) disconnect the usb cable
16 - reset the coby using the reset whole on the side with a paperclip or something else that fits in the whole.
17 - Coby should now be back to factory rom
Hope this is of some help
Click to expand...
Click to collapse
After following the instructions I had an error and it would not boot.. so I did the same again but changed from "default download" to "Low format whole memory before download" (this does remove all your data as the warning states) then followed steps 3 to 13 again you need to do the NAND data.fai again so that it works and I have the stock ROM just added
Pplaystore via sd card.
Additional Support, ROM upgrades via Donation
Ryder663 said:
After following the instructions I had an error and it would not boot.. so I did the same again but changed from "default download" to "Low format whole memory before download" (this does remove all your data as the warning states) then followed steps 3 to 13 again you need to do the NAND data.fai again so that it works and I have the stock ROM just added
Pplaystore via sd card.
Click to expand...
Click to collapse
Excellent support site for all thing Kyros.
tipsters ROM upgrades are fantastic and well worth the recommended donation.
Hello,
I used instrucjion to downgrade android to v.2.3.3. It worked, but after downgrade I can't turn on 3G.
I have 3G option, but when I click on 3G i see all the time "Turning on..." I don't see 3G enable or something else. 3G nor working.
During flashing to android v2.3.3 I have inserted SIM card to tablet :/ Reset to default do not work :/
kaosmad said:
After hours of seraching on the net I now have my kyros 1125-3g back to 2.3.3 and with 3g support
I have uploaded the files needed to hxxp://kaosmad.com/android/mid1125/1125-3g.zip
There is a pdf file with instructions in the zip file but basically this is what you need to do,
0 make sure coby is turned off
1 - unzip the file
2 - install the drivers from the drivers folder (depending on your operating system)
3 - start the program FWDN_V7_v2.13
4 - click on the '...' button
5 - click on files types and change it to all files
6 - select lk.rom and MTD.img and click on open
7 - click on add files
8 - turn on coby by pushing the on button whilst holding the volume up button for at least 8 seconds, till the coby screen says plug in usb cable
9 - plub in usb cable
10 - wait for windows to finish detecting / installing drivers
11 - the FWDN software should now see the coby and show the memory allocation layout on the right side of the software.
12 - click on NAND Data from the block on the right and create file NAND Data.fai
13 - click on start
14 - wait while coby is updated
15 - when the screen says download complete (turns green) disconnect the usb cable
16 - reset the coby using the reset whole on the side with a paperclip or something else that fits in the whole.
17 - Coby should now be back to factory rom
Hope this is of some help
Click to expand...
Click to collapse
little help please!!
hi xda-developers, im just need a little help with my kyros 1125 4gb no 3g, already google my problem but i didnt found anything about hard reset, i dont have the lock code for my tblet and i want to reset it, i tryed the normal way for android but nothing hapen, if any body know a tutorial how to reset my device, please share the information, thank you soo much for ur help
fidodj23 said:
hi xda-developers, im just need a little help with my kyros 1125 4gb no 3g, already google my problem but i didnt found anything about hard reset, i dont have the lock code for my tblet and i want to reset it, i tryed the normal way for android but nothing hapen, if any body know a tutorial how to reset my device, please share the information, thank you soo much for ur help
Click to expand...
Click to collapse
1125-4G rom
Download file from here
https://www.dropbox.com/s/fixhl34x7qr13v6/1125.zip?dl=0
Copy entire 1125.zip folder to desktop
Extract 1125.zip to desktop
Install PdaNetA4170.exe driver ( This should allow you to transfer files with Fastboot )
This is Version 4.17 installer for Windows 8/7/Vista/XP (both 32/64bit)
Extract CWM recovery img_1125 folder to desktop by itself ( Do not remove any files from this folder )
Move zip files from zips folder to micro sd card and insert sd into tablet ( leave these in zip format !! )
coby_gapps.zip
coby_mid1125-seed-0012.zip
Superuser-3.1.3-arm-signed.zip
Also move apks from apks folder to MicroSD card
Uni-init+v1.0.apk
Google_Play_serv.ices-signe.d .apk
Busybox.apk
Link2sd.apk
and
market-helper-2.0-beta.apk ( this will allow spoofing of market for not compatible apps )
Open cmd window
( menu , run , when window opens , enter “cmd” without quotes )
Cd to directory
ie ,
type in window
cd desktop , ( enter )
cd CWM recovery img_1125 ( enter )
Now place 1125 into fastboot mode , power ( or reset button ) and volume down , tablet will show fastboot mode in lower left corner
Plug in usb cable to pc and tablet
Then in cmd prompt type
fastboot boot recovery.img ( enter )
It will show some stuff , flash ok and done ok
Tablet should boot to CWM give it a moment to do so ( You will see CWM Recovery Top hat and such )
Volume up is up , Volume down is down , Home ( Silver Button ) is select
Go to and select flash zip from sd card
This will pull up menu of following zip files
Flash each zip file
coby_mid1125-seed-0012.zip
coby_gapps.zip
Superuser-3.1.3-arm-signed.zip
Select reboot
Tablet will boot ,again give it a moment ( You will see Coby and then Android splash screen )
Select language from first screen ( as it will be in Dutch ), finish setup of tablet
Open ES File Explorer , go to tools setting in ES File Explorer and select
“Root Explorer” to on , allow when Super User prompt shows , this will prove SU is installed and working
Open ES File Explorer , Select sdcard top right , Select storage
Install Google_Play_serv.ices-signe.d .apk ( To sync Play Store )
Install Busybox.apk
Install Link2sd.apk
Install Uni-init+v1.0.apk
Open Uni-init+v1.0.apk , install intd support
( you will need busybox installed first for this to work )
You now have working Play Store , Superuser and Android 4.1 with Intd support
For Extended memory ,( You need this )
Increase Internal Memory by Link2SD : Min 2 GB microSD
In order to add memory to Coby 1125, your micro SD card used for install will need to be formatted
Copy all files you wish to keep from micro SD to desktop as it will be wiped
• Backup all your files on memory card.
• Go into the Recovery Mode ( as above , fastboot boot recovery.img ) ( Your operating system will be fine )
• Make a nandroid backup at this time
• Select “Advanced”, and then choose “Partition SD Card”.
• Then Choose your size ( if you have a 2GB Memory Card, choose 512 MB, and if you have a 4 GB Memory card, you can choose 1024 MB, ext ).
• Select 0 Swap.
• Wait for the process to finish, and then select Reboot
You’ve just made a partition on your memory card, and its ready to use.
Now follow the steps below for Link2SD
• Open Link2SD. You will be prompted to choose between ext2,ext3,ext4 and FAT32.
• Choose ext2
• Select OK ,
• It will then say, “Mount Script Created”.
• Now you Reboot your Tablet
• Open Link2SD again, if any message does not appear ,it means you succeeded.
• Go to Link2SD > Setting( far right top icon ) scroll down > Check the autolink. (to automatically move apps upon installation).
If you already have some apps listed , select “create link” ( be sure to check the files: app, dalvic-cache, and library files).
Move to SD option only moves app to SD it does not link them
Now to check the memory, select “Storage Info” . this will be showing you up the current status of your internal memory.
You should see as below SD Card 2nd Part
To move a system App you can long press App , it will pull up menu , select convert to user App let it do its thing
Select App again and it will open option to create link as installed user apps do
So far I have moved Calculator , VPN , Music FX , ES File Explorer and Sound Recorder with no issue
Use Link2Sd and (long press) on SystemUpdate.apk ( /system/app/SystemUpdate.apk ) and freeze app.
This will stop System Update from happening at random moments or on reboot
There is no Update to install though the System thinks so (without freezing it will continue to show updates available)
So this thread is going to be AIO thread for Karbonn A25(alps) 5inch duple series mobile, which containing ICS 4.0, 512MB RAM, 114 MB RAM..
As there are two karbonn a25 mobiles in market, so please don't get confuse in this 5inch mobile.
there is no thread for this mobile, and i have done some successful experiments on it like = rooting, unrooting, increase internal memory, volume button hack etc...
so i decided to serve with specially with video tutorials.
you can post your queries, result and request and whatever you have for this mobile.
now, at very 1st. i want to have attention of developers for "NO CWM SUPPORT", please..
----
now here my posts goes..
Hack Video Tutorials for Karbonn A25
RESET : RESET IS A SOLUTION OF LOW INTERNAL MEMORY, PLAY STORE NOT DOWNLOADING (other problems too, but these two are major)
******
ROOT : YOU MUST BE AWARE OF IT , REMIND = WILL VOID YOUR WARRANTY (can retrieve back with unrooting if boot loader not unlocked)
PART 1 :
PART 2 :
******
INCREASE INTERNAL MEMORY (link2sd) : Yeh u can install single bit of app in sd card to maintain the internal memory more than 100MB (i haven't got success in swapping yet)
PART 1:
PART 2 :
******
VOLUME BUTTON AS DEDICATED CAMERA : via this key mapping method u can change any android device key working
******
UNROOT : before sending android mobile to service centre try to unroot it
******
PLAY STORE NOT DOWNLOADING : this is a major problem in karbonn a25, and i m providing just a tip not a permanent solution
********************************
so these are the hacking tutorials for now, i will provide you text guide soon, please keep patience..
and in next post i will give you game performance
Game performance videos : Karbonn A25
Well i am not a gaming boy, but to check the capabilities of dual core,
i used to download games on users request so that they can idea to buy it or not.
IF YOU HAVE REQUEST THEN U CAN ASK, will be helpful if you provide download link
here are some hd games for android
modern combat 4
*************
nfs most wanted :
*********
asphalt 7 heat download and first run
*********
asphalt 7 heat :
*********
turbo fly hd :
**********
temple run oz
*************
speed racing :
*********
bike race :
*************
ninjump :
******************
yoo ninja :
FAQS of Karbonn A25
Here i will post faqs :
#1 : Can we have jellybean?
Ans. : Karbonn does not officially release updates, we have to look for custom rom.
#2 : Will you recommend flashing new rom?
Ans : no, do not try new rom until u backup ur stock rom, and its not possible yet, because CWM does not support.
#3 : Play store doesnt start download.. what to do?
Ans : watch the video for "playstore does not start downloading"
----more to come----
Share android mobile internet in different ways
So here we are having internet plan in mobile or using someone’s wifi and want to share with another device.
you may be wondering that why i will share wifi internet with other laptop as it already got wifi reciever,
i tell you why,
some of wifi owners restrict the IPs i.e. devices to connect, so in that case this blog will be helpful to those receivers.
So, here i am going to show you 3 ways.
1st way : via wifi hotspot
the other device should have wifi receiver and should receive internet from gprs
go to system setting>>
More.. (under WIRELESS & NETWORKS section) >>
Tethering & portable hotspot >>
Portable Wi-Fi hotspot (make check it)
thats it.
you can also configure ur wifi hotspot in KEEP wifi hotspot on & configure wifi hotspot
this method works for all devices that have wifi receiver such as mobile, computer, tablet etc..
2nd way : via bluetooth
FIRST YOU MUST BE PAIR WITH computer or laptop and should receive internet from gprs or wifi
go to system setting>>
More.. (under WIRELESS & NETWORKS section) >>
Tethering & portable hotspot >>
Bluetooth Tethering (make check it)
thats it.
this method works only in computer and laptop.
3rd way : via usb
first you should connect with device like computer or table(usb otg) and have drivers installed( it automatically get install with first connecting) and should receive internet from gprs or wifi
go to system setting >>
More.. (under WIRELESS & NETWORKS section) >>
Tethering & portable hotspot >>
USB Tethering (make check it)
thats it.
this method works only in computer and laptop
Reserved.
Help
I am not having phone currently plz someone try to find out supported cwm and ROM for my phone,...plzz faster,....i am dying without my phone,....
Model : Karbonn A25
Cpu : MT6577 seen in factory mode>version.actually said to be MT6517 on internet and in android info app
Rom : stock,.stuck in boot loop after changing font and bootanimation,...is there anyway to replace them without root,.....i tried android commander,with phone in factory mode gave the access to filesystem,....but android commander asks for root which is not possible until phone boots,...up,.. :crying:
Recovery : stock(android 3e recovery) which don't let me install anything by zip,...cwm support unavailable yet,.......rom also unavailable yet,.....
PLZ HELP ME OUT :crying: :crying:
Help!!
Naineesh said:
I am not having phone currently plz someone try to find out supported cwm and ROM for my phone,...plzz faster,....i am dying without my phone,....
Model : Karbonn A25
Cpu : MT6577 seen in factory mode>version.actually said to be MT6517 on internet and in android info app
Rom : stock,.stuck in boot loop after changing font and bootanimation,...is there anyway to replace them without root,.....i tried android commander,with phone in factory mode gave the access to filesystem,....but android commander asks for root which is not possible until phone boots,...up,.. :crying:
Recovery : stock(android 3e recovery) which don't let me install anything by zip,...cwm support unavailable yet,.......rom also unavailable yet,.....
PLZ HELP ME OUT :crying: :crying:
Click to expand...
Click to collapse
I have Same Prob !!!
PLs Help!!
Help if u can,..now this a challenge for developers,.....
Xavier_99 said:
I have Same Prob !!!
PLs Help!!
Click to expand...
Click to collapse
Any developer here plz help us out,...........plzzzzzzzzzzzzzzzzzzzzz,......... :highfive:
Failure ..... Install_Failed_Insufficient_Storage.
Hi,
I am trying to get more internal storage space and am having an issue. First off, my phone is rooted and I have been using link2sd from the beginning. I was reading the forums and noted that my davlik cache could be the problem and upon further research noted that even though my apps are on my sd card (at least link2sd says so), I need to create a symbolik link in order to move the davlik cache. When I go to create the link, I get an error message that states:
Failure ..... Install_Failed_Insufficient_Storage.
I am using Karbonn A25 duplex series phone and remember CWM (Clockworkmod) doesn't support to this mobile. It's a 16gb card and I don't have that many apps. I did partition the card in the beginning. I downloaded the Quick System Info app and it says I have 12 gb of free SD card storage and 4 gb free of Secondary SD storage. Does anyone have any ideas as to why I'm receiving the error message when trying to create the link and move the davlik cache? Thanks in advance!
PREET Singh
?????
what to do
[email protected] plzz help...
A major problem about Internal Memory and RAM
Sir, I have looked at all your posts at karbonn A25, but I have a major problem.
You know that the RAM is quite less, merely 512MB and it is covered by applications.
I have rooted my phone as your shown and its succesfully ROOTED and I have partioned my SD Card as shown by Link2SD.
Now I would like to know if I could increase RAM by any method.
Karbonn A25 doesn't support ROEHSOFT RAM EXPANDER.
So I referred to http://forum.xda-developers.com/showthread.php?t=1934360 and
it said that you should not have any Partition in SD Card.
Can you guide how to increase RAM also, with the Partition in Play!
Thank You,
Junior Member
A Humble Request
This Thread is created only for problems after flashing roms.:victory:
:goodon't Forget to Say Thanks if you find working Solutions.:good:
Solution for Invalid IMEI
To set IMEI back using simple method follow th steps given below.
1. write *#*#3646633#*#* on your Dial pad. then an Engineer mode will ope.
2. Go to
Connectivity > CDS Information > Radio Information
3. For IMEI 1 select phone 1
Foe IMEI 2 select phone 2
4. In this window in irst line AT+ is already written,
just write E next to it, various commands will drop down,
5. If you selected phone 1, then select command AT+EGMR=1,7,""
If you selected phone 2, then select command AT+EGMR=1,10,""
6. write yor IMEI no. (you can find it on your mobile box or below battery) betwwen double inverted comma,
example. AT+EGMR=1,7,"911234567894567"
7. click on SEND AT COMMAND button,
8. Reboot your phone.
9. Check your IMEI using *#06# number on dial pad.
If your engineer mode is not opened, then go to settings > Apps.
then select all apps and open engineer mode.apk app
uninstall updates, and again try above steps.
If trick is useful to you then give thanks
Hey guys please help me urgently IMEI is not getting detected and my both SIMS are not working even the procedure above is not working for me please help recomended at urgent basis.
---------- Post added at 03:48 PM ---------- Previous post was at 03:05 PM ----------
Hey any DEV and Professional anyone there please help me out soon its very urgent my sims not detecting pls help what to do
Custom rom s4 chd watsapp tone issue.
I am using s4 chd on my device but seems that no matter what notification sound you set in watsapp you gotta listen to the whole samsung irritating tone. Please help. Also ringtone is also stuck to default but that doesn't bothers much. Thanks in advance.
Hey there is any DEV professional available who can help me in getting the IMEI Invalid error fixed please my whole work is stuck here cos of it
sumit.gore21488 said:
Hey guys please help me urgently IMEI is not getting detected and my both SIMS are not working even the procedure above is not working for me please help recomended at urgent basis.
---------- Post added at 03:48 PM ---------- Previous post was at 03:05 PM ----------
Hey any DEV and Professional anyone there please help me out soon its very urgent my sims not detecting pls help what to do
Click to expand...
Click to collapse
THIS WORKS FINE ON MICROMAX pHONES...WHAT IS YOUR MOBILE MODEL NUMBER?
Solution of nvram warning in jelly bean
Prerequisites:
On Mobile : i) it must be rooted ii) it must have root file explorer installed (i used 'Total Commander' - you can download it from Play store).
On Computer (Desktop/Laptop) : A stable Hex Editor Application. I used 'HxD - Hexeditor Ver.1.7.7.0' on my laptop running on Windows 8 64 Bit OS.
Step wise Guide
Step # 1 : Switch on WiFi adapter on your phone.
Step # 2 : Go to 'About Phone' from Settings and note your phone's Wi-Fi MAC Address mentioned there. It should lok like xx:xx:xx:xx:xx:xx (xx = value of Mac Add.)
Step # 3 : Switch off WiFi adapter on your phone
Step # 4 : Launch 'Total Commander' application on your phone and navigate to File system root/data/nvram/APCFG/APRDEB and copy one file named 'WIFI' from there to the SD Card of your phone
Step # 5 : Copy this file i.e. WIFI from your SD card to Desktop on your laptop/desktop
Step # 6 : Launch 'HxD-Hexeditor' on your laptop/desktop and click on OPEN or Ctrl+O and select WIFI file (copied as per Step # 6) from desktop
Step # 7 : Refer to the first raw in the opened file and go to column no. 04
Step # 8 : Insert value of your actual MAC Address (as per Step # 2) in column 04 to 09 (Ensure that none of the value is ZERO) and SAVE this change
Step # 9 : Close Hexeditor and copy changed WIFI file from your desktop to the SD card of your phone. Delete older WIFI file from SD Card before copying this file.
Step # 11 : Once the file is copied to SD card,launch Total Commander application and move this file from SD card root to File system root/data/nvram/APCFG/APRDEB
Step # 12 : Reboot your phone
Voillaaaa! Your phone's WiFi NVRAM Error is
gone now. Yes, you solved it.
Please share here in this thread if you find any
difficulties or problems in following these steps.
Hello,
I updated my phone to official 4.2.1 jelly bean and set external as mu default write. After 2-3 days i can't move apps to internal SD card!!!! Even if i select internal sd as default it doesn't show in Apps menu as default write and i can't move apps to internal SD???
Plz fix this issue or is it a bug in 4.2.1?????
tejash.my26 said:
THIS WORKS FINE ON MICROMAX pHONES...WHAT IS YOUR MOBILE MODEL NUMBER?
Click to expand...
Click to collapse
I am having Micromax Canvas HD A116
cant take a screenshot even
when connected to pc shows -1095600bytes
and many more problems related to internal memory
please help asap..
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your specific device forum here (bookmark/subscribe this):
Samsung Galaxy Star
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Galaxy Star Q&A, Help & Troubleshooting
Good luck!
hello everyone
I am using samsung galaxy star pro gt s7262
i think i bricked my phone when I was using swapper2..( i tried to create swap file and path for that was my internal sd card )
I don't know what exactly happened but here are some of suspicious apps from my device
swapper 2
Ram Expander
lucky patcher
xposed framework
Link2Sd
one of these caused this thing....
well,
1. Now Im getting update device information, a yellow colored message that covers center of the screen and it keeps flashing on screen constantly. THIS IS HOW IT LOOKS -->
PDA : S7262XXUAND5
Phone : S7262XXUAMK2
CSC : S7262ODDANA1
H/W :
RF CAL DATE : UNKNOWN
UN : CN5085A76C49790
REAR CAM : SR200PC20M NA
TSP : Zl122207 Zl122207
TSK :Zl122207 Zl122207
CH : NA
UART : NA, USB : NA
2. Internal storage is not visible (cant mount sdcard, cant mount efs in cwm)
3. cant connect to mtkdroid / adb shell (only odin detects my device... )
3. Most important no network, no wifi, no bluetooth, no mobile data
I can still listen to music though, other apps are working fine...
Things I tried :
1. flashing my stock rom using odin 3.07
-> not working
2. used pit (logan2g.pit)
-> not working
3. Im using cwm 6.0 touch recovery, wiped everything possible..
-> not working
is there any way i can recover this thing...
ANY APP
ANY TOOL
Thanks for any kind of Help..
princebh said:
cant take a screenshot even
when connected to pc shows -1095600bytes
and many more problems related to internal memory
please help asap..
Click to expand...
Click to collapse
do u know how to flash stock rom through Odin?
---------- Post added at 10:41 PM ---------- Previous post was at 10:39 PM ----------
Sam996 said:
hello everyone
I am using samsung galaxy star pro gt s7262
i think i bricked my phone when I was using swapper2..( i tried to create swap file and path for that was my internal sd card )
I don't know what exactly happened but here are some of suspicious apps from my device
swapper 2
Ram Expander
lucky patcher
xposed framework
Link2Sd
one of these caused this thing....
well,
1. Now Im getting update device information, a yellow colored message that covers center of the screen and it keeps flashing on screen constantly. THIS IS HOW IT LOOKS -->
PDA : S7262XXUAND5
Phone : S7262XXUAMK2
CSC : S7262ODDANA1
H/W :
RF CAL DATE : UNKNOWN
UN : CN5085A76C49790
REAR CAM : SR200PC20M NA
TSP : Zl122207 Zl122207
TSK :Zl122207 Zl122207
CH : NA
UART : NA, USB : NA
2. Internal storage is not visible (cant mount sdcard, cant mount efs in cwm)
3. cant connect to mtkdroid / adb shell (only odin detects my device... )
3. Most important no network, no wifi, no bluetooth, no mobile data
I can still listen to music though, other apps are working fine...
Things I tried :
1. flashing my stock rom using odin 3.07
-> not working
2. used pit (logan2g.pit)
-> not working
3. Im using cwm 6.0 touch recovery, wiped everything possible..
-> not working
is there any way i can recover this thing...
ANY APP
ANY TOOL
Thanks for any kind of Help..
Click to expand...
Click to collapse
did u installed correct device driver?
ODIN needs correct device driver to work.
princebh said:
cant take a screenshot even
when connected to pc shows -1095600bytes
and many more problems related to internal memory
please help asap..
Click to expand...
Click to collapse
hey my friend i think this problem cuz the EFS and Modem are deleted. extract this file (EFS-Fix-7amza.tar.md5.zip) i attach it to u then flash it with odin and the problem will be fixed.
Sam996 said:
hello everyone
I am using samsung galaxy star pro gt s7262
i think i bricked my phone when I was using swapper2..( i tried to create swap file and path for that was my internal sd card )
I don't know what exactly happened but here are some of suspicious apps from my device
swapper 2
Ram Expander
lucky patcher
xposed framework
Link2Sd
one of these caused this thing....
well,
1. Now Im getting update device information, a yellow colored message that covers center of the screen and it keeps flashing on screen constantly. THIS IS HOW IT LOOKS -->
PDA : S7262XXUAND5
Phone : S7262XXUAMK2
CSC : S7262ODDANA1
H/W :
RF CAL DATE : UNKNOWN
UN : CN5085A76C49790
REAR CAM : SR200PC20M NA
TSP : Zl122207 Zl122207
TSK :Zl122207 Zl122207
CH : NA
UART : NA, USB : NA
2. Internal storage is not visible (cant mount sdcard, cant mount efs in cwm)
3. cant connect to mtkdroid / adb shell (only odin detects my device... )
3. Most important no network, no wifi, no bluetooth, no mobile data
I can still listen to music though, other apps are working fine...
Things I tried :
1. flashing my stock rom using odin 3.07
-> not working
2. used pit (logan2g.pit)
-> not working
3. Im using cwm 6.0 touch recovery, wiped everything possible..
-> not working
is there any way i can recover this thing...
ANY APP
ANY TOOL
Thanks for any kind of Help..
Click to expand...
Click to collapse
instead of CWM recovery use TWRP recovery :
download this version first
link: https://forum.xda-developers.com/ga...p-team-win-recovery-project-v2-6-3-0-t3114966
then after u flash it via odin flash this latest version of twrp recovery
link:https://forum.xda-developers.com/galaxy-star/development/official-twrp-3-0-2-0-t3385730
then go to TWRP recovery and make a full wipe: (go to wipe > advanced wipe > then select system,data,cache,and internal storage) and then boot to download mode and flash your stock based rom via odin and every thing will work again
S7262
hamzaeid said:
hey my friend i think this problem cuz the EFS and Modem are deleted. extract this file (EFS-Fix-7amza.tar.md5.zip) i attach it to u then flash it with odin and the problem will be fixed.
Click to expand...
Click to collapse
Hi. Can i ask where Should I put this file You gave in odin? Because when I put the file in every section it says binary is unvalid.
Hey guys i just wanna share how i solved my lenovo yoga problem with broken partition after rooting the tablet,i haved troubles with installing apps and use them,tablet its just goes reboot and its continues about 10 or more restarts,so fixed this when i returned to stock i searched here on xda i dont finded any stuff about this and i decided to share
First memory card is required if you dont have it will not work! So get memory card at least 4GB.
INSTRUCTIONS
-----------------------
1.Boot into Android normally.
2.Connect your phone to your PC/Laptop with a USB cable and when asked (or in USB connection settings), please select USB Mass storage mode to mount SD card.
3.Unzip the downloaded archive.
4.Copy "sdfuse" folder from archive to SD card.
Note: Please make sure that your phone has atleast 60% power before attempting or beginning upgrade. Or keep charger connected during the process.
:cyclops: SD card upgrade process:
Long press VOL UP + POWER_KEY to enter the droidboot,
A menu will appear. Select the fourth option, SDUPDATE.
At the bottom of the screen, you can see the progress and status of the update
When you see the message "SDCARD UPDATE SUCCESS!!!", this means you successfully completed the upgrade process
Now, reboot your device and hopefully it should be updated. You will have Jelly Bean 4.3 :highfive:
When it boots go to contacts type on new cotact name this code ####6020# then select your region! You must do this to get new update to KitKat,if you not it will show you that you dont have updates.
Sorry for my BAD english! :silly:
EUROPE VERSION with 3G ! Download Stock ROM for 3G version! /MEGA/ 860Mb:good:
I think for the Wi-Fi version it will be the same way so here is the link for Wi-fi
Download Stock ROM for Wifi version /Yandex/ 805Mb
hey thanks a bunch for that.! I have a B8080F wifi only model, currentlyrooted on 4.42, but it is a Chinese ROM ( build B8080_S102208_140918_PRC_wifi). can I use this?
Currently living in China but will be moving soon so looking for international rom .
yipeeyiho said:
hey thanks a bunch for that.! I have a B8080F wifi only model, currentlyrooted on 4.42, but it is a Chinese ROM ( build B8080_S102208_140918_PRC_wifi). can I use this?
Currently living in China but will be moving soon so looking for international rom .
Click to expand...
Click to collapse
This is for all version i think.
When it boots go to contacts type on new cotact name this code ####6020# then select your region! I think that will do the job when you select your region
Download Stock ROM for 3G version! /MEGA/ 860Mb it is not available ! Where can I download it ?
when I type ####6020#, it says: Attention Error! Do not have easyimage.zip
[email protected] said:
Download Stock ROM for 3G version! /MEGA/ 860Mb it is not available ! Where can I download it ?
Click to expand...
Click to collapse