This Thread is created only for problems after flashing roms.:victory:
:goodon't Forget to Say Thanks if you find working Solutions.:good:
Solution for Invalid IMEI
To set IMEI back using simple method follow th steps given below.
1. write *#*#3646633#*#* on your Dial pad. then an Engineer mode will ope.
2. Go to
Connectivity > CDS Information > Radio Information
3. For IMEI 1 select phone 1
Foe IMEI 2 select phone 2
4. In this window in irst line AT+ is already written,
just write E next to it, various commands will drop down,
5. If you selected phone 1, then select command AT+EGMR=1,7,""
If you selected phone 2, then select command AT+EGMR=1,10,""
6. write yor IMEI no. (you can find it on your mobile box or below battery) betwwen double inverted comma,
example. AT+EGMR=1,7,"911234567894567"
7. click on SEND AT COMMAND button,
8. Reboot your phone.
9. Check your IMEI using *#06# number on dial pad.
If your engineer mode is not opened, then go to settings > Apps.
then select all apps and open engineer mode.apk app
uninstall updates, and again try above steps.
If trick is useful to you then give thanks
Hey guys please help me urgently IMEI is not getting detected and my both SIMS are not working even the procedure above is not working for me please help recomended at urgent basis.
---------- Post added at 03:48 PM ---------- Previous post was at 03:05 PM ----------
Hey any DEV and Professional anyone there please help me out soon its very urgent my sims not detecting pls help what to do
Custom rom s4 chd watsapp tone issue.
I am using s4 chd on my device but seems that no matter what notification sound you set in watsapp you gotta listen to the whole samsung irritating tone. Please help. Also ringtone is also stuck to default but that doesn't bothers much. Thanks in advance.
Hey there is any DEV professional available who can help me in getting the IMEI Invalid error fixed please my whole work is stuck here cos of it
sumit.gore21488 said:
Hey guys please help me urgently IMEI is not getting detected and my both SIMS are not working even the procedure above is not working for me please help recomended at urgent basis.
---------- Post added at 03:48 PM ---------- Previous post was at 03:05 PM ----------
Hey any DEV and Professional anyone there please help me out soon its very urgent my sims not detecting pls help what to do
Click to expand...
Click to collapse
THIS WORKS FINE ON MICROMAX pHONES...WHAT IS YOUR MOBILE MODEL NUMBER?
Solution of nvram warning in jelly bean
Prerequisites:
On Mobile : i) it must be rooted ii) it must have root file explorer installed (i used 'Total Commander' - you can download it from Play store).
On Computer (Desktop/Laptop) : A stable Hex Editor Application. I used 'HxD - Hexeditor Ver.1.7.7.0' on my laptop running on Windows 8 64 Bit OS.
Step wise Guide
Step # 1 : Switch on WiFi adapter on your phone.
Step # 2 : Go to 'About Phone' from Settings and note your phone's Wi-Fi MAC Address mentioned there. It should lok like xx:xx:xx:xx:xx:xx (xx = value of Mac Add.)
Step # 3 : Switch off WiFi adapter on your phone
Step # 4 : Launch 'Total Commander' application on your phone and navigate to File system root/data/nvram/APCFG/APRDEB and copy one file named 'WIFI' from there to the SD Card of your phone
Step # 5 : Copy this file i.e. WIFI from your SD card to Desktop on your laptop/desktop
Step # 6 : Launch 'HxD-Hexeditor' on your laptop/desktop and click on OPEN or Ctrl+O and select WIFI file (copied as per Step # 6) from desktop
Step # 7 : Refer to the first raw in the opened file and go to column no. 04
Step # 8 : Insert value of your actual MAC Address (as per Step # 2) in column 04 to 09 (Ensure that none of the value is ZERO) and SAVE this change
Step # 9 : Close Hexeditor and copy changed WIFI file from your desktop to the SD card of your phone. Delete older WIFI file from SD Card before copying this file.
Step # 11 : Once the file is copied to SD card,launch Total Commander application and move this file from SD card root to File system root/data/nvram/APCFG/APRDEB
Step # 12 : Reboot your phone
Voillaaaa! Your phone's WiFi NVRAM Error is
gone now. Yes, you solved it.
Please share here in this thread if you find any
difficulties or problems in following these steps.
Hello,
I updated my phone to official 4.2.1 jelly bean and set external as mu default write. After 2-3 days i can't move apps to internal SD card!!!! Even if i select internal sd as default it doesn't show in Apps menu as default write and i can't move apps to internal SD???
Plz fix this issue or is it a bug in 4.2.1?????
tejash.my26 said:
THIS WORKS FINE ON MICROMAX pHONES...WHAT IS YOUR MOBILE MODEL NUMBER?
Click to expand...
Click to collapse
I am having Micromax Canvas HD A116
Related
Hello All,
I know it's a simple question, but I spent over an hour browsing thru the phone and still can't find Device ID # or Card ID #...Do you know how?
I went to Settings > System > about = and my device id name is: Pocket_pc. No #s
I went to Settings > system > device info = Nothing
I went to Settings > personal > owner information = still Nothing
I'm going crazy trying to find this # or the Card ID # for my SD card. I browsed thru everything I can to find the Card ID #, but still nothing.
Help me please.
dont know what device id your looking for but if ur looking for the one to install tom tom ... there should be a file that it puts on ur sd card called ttnaigator that if you open it in wordpad it will tell u the device id ...
otherwise what do u need ur device id for ?
crashelite said:
dont know what device id your looking for but if ur looking for the one to install tom tom ... there should be a file that it puts on ur sd card called ttnaigator that if you open it in wordpad it will tell u the device id ...
otherwise what do u need ur device id for ?
Click to expand...
Click to collapse
Trying to install Garmin XT. I can't install it since I don't know my device (card) id.
open the app Skip GPS detect to start with to get to the about screen in Settings/about for your ID number.
http://forum.xda-developers.com/showthread.php?t=348003&page=4
post 36
hello
I have Bharat Electronics Limited company's Tablet known as BELTab and unfortunately i don't have any kind support from their side.
I HAVE Attached A FILE Of SYSTEM SPECIFICATION which i get from one application other wise i am unable to get any kind of system specs
A small intro to my tablet shown in my settings > about Tablet option
Android Version = Android 2.2
Model number = BELTab
Kernel Version = 2.6.32 [email protected]#1
Base Band Version = Unknown
Build number = BELTab.Version2.10-10-2011
It has
1. Wifi --> Not Working
2. Bluetooth --> Not Working
3. Ethernet --> Working
4. Simcard / Phone options --> Not Available
5. USB --> 2 Slots Working ( in 1 slot i m using keyboard )
6. Memory Card Slot --> 1 SD Card Slot
7. Headphone & Mic --> YES 1 slot for Headphone 1 slot for mic
8. Buttons --> 1 power button 1 back button
9. Hard Reset --> Yes Available
10. Touch screen type --> Resistive touch ( i guess)
Other info u can find in Attached File.
I want to flash new ROM because there are too many problems in current ROM that i came to know
Problems :
1. Force closes on mostly all tabs in "about tablet" section so cant get information
2. Force closes on so many applications
3. Can't Use WIFI and Bluetooth getting message showing "Error" as error text nothing in description
I have rooted it using application z4root and installed busybox and superuser but cant find my model in rommanager so cant get backup of current rom and cant install the new ROM
Help plz
http://www.beatcity.co.uk/bel-india-releases-cheapest-tab/
Use the holly google.
Tried Google but cant find solution :/
globula_neagra said:
http://www.beatcity.co.uk/bel-india-releases-cheapest-tab/
Use the holly google.
Click to expand...
Click to collapse
Tried Google but cant find solution :crying:
Bump plz help
Sent from my Hero using xda app-developers app
Hey Guys..
So I have a LG - P698 (Optimus Link/Net Dual)
I had a custom ROM in it.. It was going well but then I saw that battery drains much faster in custom ROM.. so I tried reverting back to stock by using KDZ method.. I followed this guide : http://androidforums.com/threads/guide-flash-stock-rom-recover-bricked-lg-optimus-net-p690.852823/
But due to some error.. I can't recall it.. the phone got hard-bricked.. it didn't boot nor did go to emergency mode..
I gave it to a friend who had a RIFF JTAG Box.. and he fixed the boot and flashed again with the above link.. this time it flashed..
But thing is that after flashing, the network never came up.. It showed no SIM Card.. but the SIM was inserted.. I tried the SIM on my old HTC Gene and it worked.. But on the LG it showed No SIM Card..
The strange thing is that SIM Toolkit shows up in the menu and when I open it, it shows BSNL Portal(The Portal for BSNL in India)..
So I think that it detects the SIM.. but fails to contact the provider..
So what can I do?
Thanks in advance and sorry for the long post..
Hello my friend so probability you didn't back up the file where's is the ESN of your phone. So you need to write again. You need to fist this app:
1) Firstly write the ESN of your phone.
2) To do a note in the notes block from your PC with the next:
echo 'AT+EGMR=1,7,"IMEI_1"' >/dev/pttycmd1
echo 'AT+EGMR=1,10,"IMEI_2"' >/dev/pttycmd1
In "IMEI 1" YOU WRITE YOUR ESN. YOU DON'T ERASE THE quotes just erase the word IMEI 1.
(3) the file that you created (can give you the)
name you want) have fun with the memory of your
Android or a Micro SD, the joke is that the
Open in your device.
(4) low the ANDROID TERMINAL application
EMULATOR is totally free in playstore gone
(5) now opens your text file and copy the
first line from echo to cmd1, for that
just select the line and with the radio button
Please COPY or copy
6) on ANDROID TERMINAL EMULATOR, once
you open the app hits the line you copied and
push enter (on the digital keypad, just copy the)
text, no matter that there is a little character
in the application).
(7) repeat the process with the second line.
(8) restart your device with the SIMS
inside (if before the tapeworms in device not you)
worry doesn't pass anything)
(9) ready and are your IMEI restored! Now already
You can use your lines without problem!
As you can see! in less than 10 steps and less than 5
minutes are going to retrieve your IMEI, is very
simple and don't need much knowledge, more
that the copy and paste text.
Okay.. thanks for showing me that it is because of the IMEI..
Can someone else explain it in an understandable English?
and for LG P698.. No offence though..
Thanks BRO!
Sorry, I view that I 've written very bad. So I said that probably your ESN is erased and if you want to get it you need to have this application
Send from my RCA TAB 7" RCT6378W2
---------- Post added at 05:56 ---------- Previous post was at 05:49 ----------
The apps is called android terminal emulator. I don't offence, cuz I learn for my mistakes to write englhis better.
Many times when you upgrade a new ROM, the folder where is the files of the ESN be erase accidentally.
Send from my RCA TAB 7" RCT6378W2
cant take a screenshot even
when connected to pc shows -1095600bytes
and many more problems related to internal memory
please help asap..
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your specific device forum here (bookmark/subscribe this):
Samsung Galaxy Star
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Galaxy Star Q&A, Help & Troubleshooting
Good luck!
hello everyone
I am using samsung galaxy star pro gt s7262
i think i bricked my phone when I was using swapper2..( i tried to create swap file and path for that was my internal sd card )
I don't know what exactly happened but here are some of suspicious apps from my device
swapper 2
Ram Expander
lucky patcher
xposed framework
Link2Sd
one of these caused this thing....
well,
1. Now Im getting update device information, a yellow colored message that covers center of the screen and it keeps flashing on screen constantly. THIS IS HOW IT LOOKS -->
PDA : S7262XXUAND5
Phone : S7262XXUAMK2
CSC : S7262ODDANA1
H/W :
RF CAL DATE : UNKNOWN
UN : CN5085A76C49790
REAR CAM : SR200PC20M NA
TSP : Zl122207 Zl122207
TSK :Zl122207 Zl122207
CH : NA
UART : NA, USB : NA
2. Internal storage is not visible (cant mount sdcard, cant mount efs in cwm)
3. cant connect to mtkdroid / adb shell (only odin detects my device... )
3. Most important no network, no wifi, no bluetooth, no mobile data
I can still listen to music though, other apps are working fine...
Things I tried :
1. flashing my stock rom using odin 3.07
-> not working
2. used pit (logan2g.pit)
-> not working
3. Im using cwm 6.0 touch recovery, wiped everything possible..
-> not working
is there any way i can recover this thing...
ANY APP
ANY TOOL
Thanks for any kind of Help..
princebh said:
cant take a screenshot even
when connected to pc shows -1095600bytes
and many more problems related to internal memory
please help asap..
Click to expand...
Click to collapse
do u know how to flash stock rom through Odin?
---------- Post added at 10:41 PM ---------- Previous post was at 10:39 PM ----------
Sam996 said:
hello everyone
I am using samsung galaxy star pro gt s7262
i think i bricked my phone when I was using swapper2..( i tried to create swap file and path for that was my internal sd card )
I don't know what exactly happened but here are some of suspicious apps from my device
swapper 2
Ram Expander
lucky patcher
xposed framework
Link2Sd
one of these caused this thing....
well,
1. Now Im getting update device information, a yellow colored message that covers center of the screen and it keeps flashing on screen constantly. THIS IS HOW IT LOOKS -->
PDA : S7262XXUAND5
Phone : S7262XXUAMK2
CSC : S7262ODDANA1
H/W :
RF CAL DATE : UNKNOWN
UN : CN5085A76C49790
REAR CAM : SR200PC20M NA
TSP : Zl122207 Zl122207
TSK :Zl122207 Zl122207
CH : NA
UART : NA, USB : NA
2. Internal storage is not visible (cant mount sdcard, cant mount efs in cwm)
3. cant connect to mtkdroid / adb shell (only odin detects my device... )
3. Most important no network, no wifi, no bluetooth, no mobile data
I can still listen to music though, other apps are working fine...
Things I tried :
1. flashing my stock rom using odin 3.07
-> not working
2. used pit (logan2g.pit)
-> not working
3. Im using cwm 6.0 touch recovery, wiped everything possible..
-> not working
is there any way i can recover this thing...
ANY APP
ANY TOOL
Thanks for any kind of Help..
Click to expand...
Click to collapse
did u installed correct device driver?
ODIN needs correct device driver to work.
princebh said:
cant take a screenshot even
when connected to pc shows -1095600bytes
and many more problems related to internal memory
please help asap..
Click to expand...
Click to collapse
hey my friend i think this problem cuz the EFS and Modem are deleted. extract this file (EFS-Fix-7amza.tar.md5.zip) i attach it to u then flash it with odin and the problem will be fixed.
Sam996 said:
hello everyone
I am using samsung galaxy star pro gt s7262
i think i bricked my phone when I was using swapper2..( i tried to create swap file and path for that was my internal sd card )
I don't know what exactly happened but here are some of suspicious apps from my device
swapper 2
Ram Expander
lucky patcher
xposed framework
Link2Sd
one of these caused this thing....
well,
1. Now Im getting update device information, a yellow colored message that covers center of the screen and it keeps flashing on screen constantly. THIS IS HOW IT LOOKS -->
PDA : S7262XXUAND5
Phone : S7262XXUAMK2
CSC : S7262ODDANA1
H/W :
RF CAL DATE : UNKNOWN
UN : CN5085A76C49790
REAR CAM : SR200PC20M NA
TSP : Zl122207 Zl122207
TSK :Zl122207 Zl122207
CH : NA
UART : NA, USB : NA
2. Internal storage is not visible (cant mount sdcard, cant mount efs in cwm)
3. cant connect to mtkdroid / adb shell (only odin detects my device... )
3. Most important no network, no wifi, no bluetooth, no mobile data
I can still listen to music though, other apps are working fine...
Things I tried :
1. flashing my stock rom using odin 3.07
-> not working
2. used pit (logan2g.pit)
-> not working
3. Im using cwm 6.0 touch recovery, wiped everything possible..
-> not working
is there any way i can recover this thing...
ANY APP
ANY TOOL
Thanks for any kind of Help..
Click to expand...
Click to collapse
instead of CWM recovery use TWRP recovery :
download this version first
link: https://forum.xda-developers.com/ga...p-team-win-recovery-project-v2-6-3-0-t3114966
then after u flash it via odin flash this latest version of twrp recovery
link:https://forum.xda-developers.com/galaxy-star/development/official-twrp-3-0-2-0-t3385730
then go to TWRP recovery and make a full wipe: (go to wipe > advanced wipe > then select system,data,cache,and internal storage) and then boot to download mode and flash your stock based rom via odin and every thing will work again
S7262
hamzaeid said:
hey my friend i think this problem cuz the EFS and Modem are deleted. extract this file (EFS-Fix-7amza.tar.md5.zip) i attach it to u then flash it with odin and the problem will be fixed.
Click to expand...
Click to collapse
Hi. Can i ask where Should I put this file You gave in odin? Because when I put the file in every section it says binary is unvalid.
before i asked many people for fix but no correct solution is got but ( thanks for devs support). now i experimented and solved imei and efs partition currupted by qcn method
NOTE: ( third party qualcomm imei changing softwares will not work i tried many but no use)
steps
1. first download tools and install
2. go to qpst.exe in c:/programfiles/qualcomm/bin/qpst
3. now connect your phone open port by dialing(*#*#76937#*#) in stock
4. check whether qualcomm diagnostic port is enabled or not in device manager
5. if it shown enabled and device info its connected through diag port in qpst
6. now click software download and take backup of ur partition and save as (.qcn) and click on start it will read ur partition and
xx.qcn file will created(xx is any name)
7. now open hex editor search your imei number with [08xa] x is your starting digit of imei example(087a) for second imei click
find next option
8. now open your imei convertor and palce your imei and click convert
9. replace that converted imei in the form of hexadcimal replace with old imei same for second imei
10. important thing is while saving the file only by (save as) which is important if any mistake is happen we cant recover after
restoring in efs partition.
11. after saving again go to qpst npw go to restore option now click on start .
thats it! you got imei and signal:laugh::laugh::laugh:
i struggled 3 days for this to find correct way recover my ime
tools here
I would suggest to install Xposed and you can find IMEI changer in the download section. This will change only one IMEI number though. I mean IMEI1=IMEI2.
Another option is to use DFS tools.
And a 3rd option is to use Xiaomi (or similar for dual SIM) IMEI changer, you can use it to change both IMEI numbers.
All can be done provided that you have the box that the phone was packed in with the IMEI numbers on it.
valy_cta said:
I would suggest to install Xposed and you can find IMEI changer in the download section. This will change only one IMEI number though. I mean IMEI1=IMEI2.
Another option is to use DFS tools.
And a 3rd option is to use Xiaomi (or similar for dual SIM) IMEI changer, you can use it to change both IMEI numbers.
All can be done provided that you have the box that the phone was packed in with the IMEI numbers on it.
Click to expand...
Click to collapse
brother can you give links of that tools and restored backup up of other lemax2 so getting imei 0 and no service what should i do now?
marshharsha said:
brother can you give links of that tools and restored backup up of other lemax2 so getting imei 0 and no service what should i do now?
Click to expand...
Click to collapse
Go to the section Guides where you have posted in a topic with "unlock bands..." There you have all what you need in the OP. Connect your phone in DFS tool, check the section where you have IMEI and update it.
Or use what I wrote with Xposed and IMEI changer.
PLEASE DO NOT CREATE ANY MORE THREADS!!!
valy_cta said:
Go to the section Guides where you have posted in a topic with "unlock bands..." There you have all what you need in the OP. Connect your phone in DFS tool, check the section where you have IMEI and update it.
Or use what I wrote with Xposed and IMEI changer.
PLEASE DO NOT CREATE ANY MORE THREADS!!!
Click to expand...
Click to collapse
thank you very much and sorry for the in convenience
valy_cta said:
Go to the section Guides where you have posted in a topic with "unlock bands..." There you have all what you need in the OP. Connect your phone in DFS tool, check the section where you have IMEI and update it.
Or use what I wrote with Xposed and IMEI changer.
PLEASE DO NOT CREATE ANY MORE THREADS!!!
Click to expand...
Click to collapse
sir i downloaded i triedwrite imei but its only sim 1 imei apearing
sim2 showing unknown
Search for "WriteDualIMEI(W+G_eMMC).exe" file. Once you found it, check instructions on google to change the IMEI. It is working for Xiaomi devices as far as I remember. I tried on LeMax2 and it worked. I said I'll do a guide but time did not allow and also I forgot later on. For sure you can find instructions on xda as well.
This is the only tool I found to change both IMEIs.
Good luck!
---------- Post added at 11:38 AM ---------- Previous post was at 11:26 AM ----------
valy_cta said:
Search for "WriteDualIMEI(W+G_eMMC).exe" file. Once you found it, check instructions on google to change the IMEI. It is working for Xiaomi devices as far as I remember. I tried on LeMax2 and it worked. I said I'll do a guide but time did not allow and also I forgot later on. For sure you can find instructions on xda as well.
This is the only tool I found to change both IMEIs.
Good luck!
Click to expand...
Click to collapse
I'll write down the instructions for you.
1. Phone should be rooted, adb drivers installed
2. Connect the phone to PC and select MTP and USB debugging
3. Open command prompt from Start. In Run, type cmd.exe
4. Type in the command prompt the following: adb shell
5. Then it should show [email protected]_x2:
6. Then type: su
7. Grant access on the phone
8. Then it should show [email protected]_x2:/ #
9. Type: setprop sys.usb.config diag,adb
10. The phone will go to Diag mode, check in device manager if it's like this. It should show at section Ports: Qualcomm HS-USB Android DIAG 901D (COM6). "6" is an example.
11. Open the WriteDualIMEI app and you should see in COM: COM6. This means that device is connected and you can type in the IMEIs.
12. Press START and that's it.