Back to stock - HTC EVO 3D

hex, i want to go back to stock EVO.
Now i have s-off with revolution.
How i can back to stock without bricking my device.
Need i cid?
Sent from my HTC EVO 3D X515m using xda premium

freakysick said:
hex, i want to go back to stock EVO.
Now i have s-off with revolution.
How i can back to stock without bricking my device.
Need i cid?
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
turn s-on with the fastboot command
relock your bootloader
download the stock rom from your provider ,rename it PG86IMG.zip and copy it to your sd card then boot into your boot loader... it should start updating to the stock rom then

Related

[Q] Not a Noob but could use some help with pg86img on hboot 1.50 S-on

I've been doing this **** for well over 2 yrs now and im either having a serious brain fart of perhaps this hasn't been entirely, exactly discussed yet .... I have googled til the cows come home and can't find an answer.
Im on hboot 1.50 with S-on bootloader is unlocked through HTC Dev
I want to flash the new i.c.s. PG86IMG.zip that Freeza (the one without the new 1.57 hboot) just put out to go along with the ICS ruu that Virtuous has put out however I know that I cannot just put the pg86img on my sd card and flash it by holding down the - volume button and power through bootloader....
MUST i relock my bootloader, ruu it back to stock and then go about it doing that way OR is there a way that I can use commands to flash the PG86IMG.zip file?????
Help would be greatly appreciated.
EDIT: I just relocked my bootloader, RUU'd it back so now I have a relocked bootloader, with hboot 1.50 S-on and when I take my battery out, put it back in- hold down vol down while pressing power....then it scans and finds the pg86img.zip but it does not offer me a chance to install the pg86img I'd REALLY appreciate some input here. Thanks.
I was too lazy/tired to downgrade so I just wiped and flashed just to see what would happen and it worked. After it booted, it was stuck on the HTC setup so I pulled the battery and rebooted it. I'm on Hboot 1.50 with S-ON.
I cannot for the life of me get the PG86IMG.zip file flashed.... i've PM'd a few different dev's but heard nothing back yet.
Man you should have atleast unlocked your bootloader first see if you can boot in to boatloader and fastboot USB if so then you can correct the problem
Sent from my HTC EVO 3D X515m using xda premium
And no you don't need to relock to install a ruu if your unlocked when you run the ruu it will relock it for you
Sent from my HTC EVO 3D X515m using xda premium
Did you check the sticky and find football thread and you will need to download the the original ruu or close to it and you may get lucky and find one that will give you hboot 1.4 if this is what your after
Sent from my HTC EVO 3D X515m using xda premium
yeah i talked to football and he didn't have a clue what to do.
andrewdelmundo said:
I was too lazy/tired to downgrade so I just wiped and flashed just to see what would happen and it worked. After it booted, it was stuck on the HTC setup so I pulled the battery and rebooted it. I'm on Hboot 1.50 with S-ON.
Click to expand...
Click to collapse
did you flash in hboot or through recovery?
did it re-lock your phone?
Question is your boatloader locked
Sent from my HTC EVO 3D X515m using xda premium
You will have to unlock your boatloader again through HTC dev if you still have the unlock token then you don't have to redownload it just use the one you have see if that works
Sent from my HTC EVO 3D X515m using xda premium
Holly ****t i think I see what's happening your in a bootloop and it is possible that the boot.IMG didn't flash properly
Sent from my HTC EVO 3D X515m using xda premium
And since your s on you will need to unlock your bootloader and then flash revolutionary version of cwm and then flash a Rom like lee droid that way you will rooted but you will still have s on this is where you should have started in the beginning
Sent from my HTC EVO 3D X515m using xda premium
This is such an annoying issue. I can run an ruu.exe such as RUU_Shooter_S_Sprint_WWE_2.17.651.5_Radio_1.06.00.1216_NV_NV_spcs_1.42_release_233304_signed_2.exe and go back to stock without any problems, I can unlock my bootloader, I can "root" the phone, even though I am on hboot 1.50 with S-ON the problem is no matter how many ways I try to flash
PG86IMG_Shooter_ICS_35_S_Sprint_WWE_VM_1.13.652.1_Radio_1.06.00.0426_NV_1.53_144_release_259069_signed.zip that Football sent me, I cannot get it install it after it scans and finds it -renamed to PG86IMG (.zip) it always goes back to hboot and says:
CID incorrect!
Update Fail!
Press <POWER> to reboot.
If it was me I would just root
Sent from my HTC EVO 3D X515m using xda premium
Depending upon which DEV i've spoken to, i've been told to try this that and the other and lol nothing works. I dont get it. I've been told to go back entirely to stock unrooted; that didn't work. Been told to root it, that didn't work.
I never had any problems flashing roms using htc dumlock but the problem is, the file I am trying to flash is not one that can be flashed through CWM/TWRP, only by being renamed PG86IMG and being started through hboot.
any other suggestions? hell i'll try em all!
I would go back to stock and start from scratch
Sent from my HTC EVO 3D X515m using xda premium
LOL im back to stock started from scratch and nada.
i'll end up most likely having to wait, like everyone else for the .exe file to be released
cid incorrect
oh and you need to change your cid number to HTC__001 and it will work
With HTC unlock, you cant flash radios (freeza's zip) & splash screens that are part of those custom PG86IMG zips. The only way to flash an Ruu is to have stock recovery/relocked and to flash the same or newer fw version (2.08, 2.17, etc).
I'm not 100% sure but the ics leak version is 1.13 which may not pass the version check.
I've read some posts that indicate an hboot 1.4 downgrade for S-off is required as things sit right now. Definitely changing daily though.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
With HTC unlock, you cant flash radios (freeza's zip) & splash screens that are part of those custom PG86IMG zips. The only way to flash an Ruu is to have stock recovery/relocked and to flash the same or newer fw version (2.08, 2.17, etc).
I'm not 100% sure but the ics leak version is 1.13 which may not pass the version check.
I've read some posts that indicate an hboot 1.4 downgrade for S-off is required as things sit right now. Definitely changing daily though.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
To further reiterate, S-ON means you do not have permissions to certain partition of the phone to flash radios, or flash kernels/roms without the 1.5 fastboot workarounds. The firmware freeza has, requires access to that certain partition. So without s-off (1.4) you cannot flash the firmware/radio for ICS.

HELP ASAP!!!!!!!!!!!

I unlocked my bootloader using htc dev and was following this to s-off:http://forum.xda-developers.com/showthread.php?t=1471246
before the PG86IMG.zip update started, i got a message that the cid is invalid
now the device is stuck on the htc splash screen, please help me asap!!
what should i do!?
should i choose the factory reset option??
Probably your best bet. Generally, if you can get to boot loader and recovery, you aren't too bad off.
i haven't installed any recovery, i can get to the bootloader though
should i install any recovery now using fastboot?
Someone please help, i havent installed any recovery and i am stuck on htc splash screen, bootloader is relocked, please help!
You should read the downgrade thread again... You MUST change th cid before flashing the pg86img... I had the same problem when I done it...
Or you can get the 2.17 stock ruu and run it to get back to stock and start over...
sent from my downgraded hboot 1.50 3vo running ZR3D injected with anthrax... s-off HTC, thanks to the real developers, I now have control of my device again
I changed , it said failed and then success on the next line.....plz help, now wht should i do?
Sent from my XT720 using XDA App
How should i check if the cid has changed or not??
Sent from my XT720 using XDA App
Instead of the european PG86IMG.zip given on the downgradin thread, Should i try the stock PG86IMG.zip for my evo 3d ?
Sent from my XT720 using XDA App
Try the stock 2.17 ruu.exe... Not PG86IMG, then start over... The stock signed PG86IMG.zip might work, but I had to use ruu... Once you get your phone back to 2.17 stock, unlock, change cid, relock, and go from there...
sent from my downgraded hboot 1.50 3vo running ZR3D injected with anthrax... s-off HTC, thanks to the real developers, I now have control of my device again
Stock ruu for my region isnt available, i just have the stock PG86IMG.zip
Sent from my XT720 using XDA App
vari9 said:
Stock ruu for my region isnt available, i just have the stock PG86IMG.zip
Sent from my XT720 using XDA App
Click to expand...
Click to collapse
Then try that
sent from my downgraded hboot 1.50 3vo running ZR3D injected with anthrax... s-off HTC, thanks to the real developers, I now have control of my device again
If i try the stock PG86IMG.zip , and it fails, would it worsen the situatiom and are there any pther method to fix my device if this doesnt work?
Sent from my XT720 using XDA App
vari9 said:
If i try the stock PG86IMG.zip , and it fails, would it worsen the situatiom and are there any pther method to fix my device if this doesnt work?
Sent from my XT720 using XDA App
Click to expand...
Click to collapse
well make sure its a PG86IMG.zip for GSM
and if you run it, your device should work.
yousefak said:
well make sure its a PG86IMG.zip for GSM
and if you run it, your device should work.
Click to expand...
Click to collapse
Downloading the stock zip now...So that means, even in future if i have to revert back to stock from custom rom or whenever i am stuck at htc splash screen i just use the stock PG86IMG.zip and go to the bootloader and update? Right? Or is the goldcard required for s-on and s-off both?
Sent from my XT720 using XDA App
vari9 said:
Downloading the stock zip now...So that means, even in future if i have to revert back to stock from custom rom or whenever i am stuck at htc splash screen i just use the stock PG86IMG.zip and go to the bootloader and update? Right? Or is the goldcard required for s-on and s-off both?
Sent from my XT720 using XDA App
Click to expand...
Click to collapse
first sentence is correct.

[Q] Factory reset now I can't flash roms?

My phone started acting wierd, so I reset it to factory and now I can't install any ROMS at all!
I had/have S-OFF but somehow I locked myself.
Says **** LOCKED***
SHOOTER XC SHIP S-OFF RL
HBOOT 158.0000
RADIO 1.09.00.0706
I've tried renaming the downloads to PG86IMG.ZIP but all it does is gives me a progress bar, parses and then goes back to the fastboot menu.
I've tried to install clockworkmod and twrp but since I don't have superuser, it won't work.
I tried pushing through adb and fastboot but no write access.
I'd like to put carbon jellybean on it.
I know I"m missing a step here somewhere. But what is it?
You wont be able to flash custom roms on fastboot and u cant flash recovery because ur bootloader is locked you kust somehow reflash the bootloader or get it unlocked.
Sent from my HTC EVO 3D X515m using xda app-developers app
OK. I think I understand. I just don't understand how I locked myself and why it is so difficult to unlock when I was unlocked before.
I'm going tyhrough the [email protected] and waiting for my bin file. Hopefully it will come soon.
Once I go through that process, what's next? How do I install either twrp or clockworkmod as I don't have SU?
Well u probably flashed an ics ruu which had bootloader update in it so it locked it. U can flash recovery.img trough adb .
Sent from my HTC EVO 3D X515m using xda app-developers app
If i helped, press thanks
Thanks
I know just enough to be dangerous.
Any idea how long it takes to get this .bin file from the htcdevelopers ?
Once I use that file, then I can what? Just rename CARBON-JB-UNOFFICIAL-20130513-143602-shooteru.zip to PG86IMG.zip in the root of my SD card and then it will work? Or do I have to do something else? If so, what? It's late and I'm getting foggy. Wanted to get this up and running for morning use.
Gmobilize said:
You wont be able to flash custom roms on fastboot and u cant flash recovery because ur bootloader is locked you kust somehow reflash the bootloader or get it unlocked.
Sent from my HTC EVO 3D X515m using xda app-developers app
Click to expand...
Click to collapse
You are wrong. I have also LOCKED BOOTLOADER and S-OFF. I can flash anything. Even, 4ext recovery is flashed in my evo3d. As you are S-OFF, you can rw anything
jimmy_coolguy2006 said:
You are wrong. I have also LOCKED BOOTLOADER and S-OFF. I can flash anything. Even, 4ext recovery is flashed in my evo3d. As you are S-OFF, you can rw anything
Click to expand...
Click to collapse
^^ this
Sent from my PG86100 using xda app-developers app
jimmy_coolguy2006 said:
You are wrong. I have also LOCKED BOOTLOADER and S-OFF. I can flash anything. Even, 4ext recovery is flashed in my evo3d. As you are S-OFF, you can rw anything
Click to expand...
Click to collapse
Sold my htc ,but still rom flashing depends on hboot version,a lot of roms need downgraded version you know
Sent from my LG-P880 using xda app-developers app
Point is if youre s off you don't need to unlock your bootloader
You can flash any hboot, radio, custom recovery, etc
Did the op fix the issue
Sent from my PG86100 using xda app-developers app

[Q] evo with s-off

Hello my fellow xda friends
I have an EVO 3d with s-off already. In the instructions on how to root, do I skip the how to s-off part or is there another way to root an EVO 3d that already has s-off?
I have: EVO 3d sprint
Shooter xc ship s-off rl
Hboot 1.58.0000
Stock recovery
What happens when you goto recovery.
Once you have a custom recovery, ie 4ext, you can backup, wipe and flash
Sent from my PG86100 using xda app-developers app
hossman said:
What happens when you goto recovery.
Once you have a custom recovery, ie 4ext, you can backup, wipe and flash
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
It goes to the stock recovery.
Install a custom recovery and get to flashing
Sent from my PG86100 using xda app-developers app
Yes!
I was coming from 3-4 yrs exclusive Motorola Androids.
So I didn't understand that once Bootloader was unlocked. There was no rooting procedure.
The next step installing a custom recovery makes this Evo 3D (maybe all newer HTCs) rooted.

HTC evo 3D help needed

Please help me with my HTC EVO 3D as it is not showing the status of bootloader whether it is locked or not. Not able to do anything with this and s is also on
Sent from my HTC Butterfly using XDA Premium 4 mobile app
Interesting
Does it boot to ROM or recovery?
I would suggest running ruu if nothing boots
Sent from my Evo 3D CDMA using xda app-developers app
I see you have 1.40 hboot. If I remember correctly, the locked/unlocked status was introduced with the 1.50 hboot update. If you are looking to root and/or get s-off, then you are in luck. Revolutionary works with hboot 1.40. So I don't think you would even need to do the HTC Dev unlock.
Sent from my Evo 3D CDMA using XDA Premium 4 mobile app
The Fer-Shiz-Nizzle said:
I see you have 1.40 hboot. If I remember correctly, the locked/unlocked status was introduced with the 1.50 hboot update. If you are looking to root and/or get s-off, then you are in luck. Revolutionary works with hboot 1.40. So I don't think you would even need to do the HTC Dev unlock.
Sent from my Evo 3D CDMA using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thnx Friends will try and revert......my phone is not booting completely after the sprint splash screen and that after evo 3d and then completely black and the bottom LED gets on and the screen is black....
I've Tried these below mentioned two of the RUU's but they are also not working please suggest what to do next....
1) RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed
2) RUU_Shooter_S_Sprint_WWE_2.08.651.2_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_208230_signed
hossman said:
Interesting
Does it boot to ROM or recovery?
I would suggest running ruu if nothing boots
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
no it does not boot to rom or recovery
Need to flash from SD card would use 1.13 ROM.
This is a link for RUU, you pull the zip from it and flash from SD card or search and find PG86IMG.zip for 1.13 which has hboot 1.4 and is the ROM revolutionary s-off uses. Anything else will update hboot.
http://www.shipped-roms.com/downloa...530_NV_NV_SPCS_1.16_release_198109_signed.exe
Sent from my DOWNGRADED EVO 3D
Thnx sir willl try and revert you the progress
Sent from my HTC Butterfly using XDA Premium 4 mobile app
jcfunk said:
Need to flash from SD card would use 1.13 ROM.
This is a link for RUU, you pull the zip from it and flash from SD card or search and find PG86IMG.zip for 1.13 which has hboot 1.4 and is the ROM revolutionary s-off uses. Anything else will update hboot.
http://www.shipped-roms.com/downloa...530_NV_NV_SPCS_1.16_release_198109_signed.exe
Sent from my DOWNGRADED EVO 3D
Click to expand...
Click to collapse
Thnx sir willl try and revert you the progress
jcfunk said:
Need to flash from SD card would use 1.13 ROM.
This is a link for RUU, you pull the zip from it and flash from SD card or search and find PG86IMG.zip for 1.13 which has hboot 1.4 and is the ROM revolutionary s-off uses. Anything else will update hboot.
http://www.shipped-roms.com/downloa...530_NV_NV_SPCS_1.16_release_198109_signed.exe
Sent from my DOWNGRADED EVO 3D
Click to expand...
Click to collapse
Sir,
it got installed successfully but the problem is still same that after the splash screen of Sprint 3D the screen remains black blank and the LED remains on .....please guide what to do if i am doing any process wrong i've tried both the ways running the RUU through computer and via SD card but from SD card it won't run just after checking the image file it remains on the bootloader screen and if i try to run recovery option then it ended up in the black screen with a Red Triangle with a Exclamation mark in it.
Please Guide what to do next
Thnx n Regards
Chhaayank
Did you get any errors? Version mismatch?
Sent from my PG86100 using Tapatalk
jcfunk said:
Did you get any errors? Version mismatch?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
no sir, when i installs it from computer by running the RUU it doesn't reflect any error with version 1.13
Are you using PG86IMG.zip to flash from sdcard?
Look here for the zip file
http://forum.xda-developers.com/showthread.php?t=1447839
Sent from my DOWNGRADED EVO 3D now Free

Categories

Resources