Hi guys,
recently i tried to use this video call(from the dialler screen) between both S2, but it fails, during the conversation the phone only show my face(smaller screen), the larger screen was black out? why is it so? got anything to do with firmware etc.?
Many thanks
Your service provider must support it in the first place. Few do, and if, it is usually pretty expansive.
I had this same problem with the GS2. I can not see the thumbnails of the pictures I take unless I remove them from the phone.
I have selected the proper windows setting to do so, but does not work. I was hoping this problem would be fixed on the GS3, but I guess not.
Anyone have a fix for this?
So I have had the S3 for a week or so now and I love it . Everything seems to have worked BUT the voice command for taking a picture.
YES the setting is on and YES the box is checked. I have reset the camera options and still the same thing no matter what I say it will still no take a picture. This was one of the features that turned me towards this phone. If anyone has any suggestions they will be greatly appreciated.
Today my friend found this strange bug. He has STOCK ROM (no root, 4.1.2 JZO54K.I9300XXELLA) and kernel. So I tested on my own SGS3 with Omega v43.1 (XXEMB5 - JB 4.1.2) and the result was the same. I made 4 pics with these steps:
1) Turn on the camera application and make new photo => correct resolution and the size
2) after this switch to video mode and then back to the photo mode and snap a photo => false resolution (always 1280x720)
3) then I switch to video mode again and shut down the application in video mode ... after that turn on application (it will be in video mode) and again switch to photo mode and make new photo => false resolution (always 1280x720)
4) then shut down the application and relaunched it and make a photo => correct resolution and the size
So this bug happens whenever you change PHOTO & VIDEO mode and also when the application starts in VIDEO mode and then you swap in to PHOTO mode. But all this happens only when Video Stabilization is TURN ON ! If it's turn off everythig is fine.
Any solution ????
No solution?
Problem on 2 others SGS3 verified.
bandit707 said:
No solution?
Problem on 2 others SGS3 verified.
Click to expand...
Click to collapse
Contact Samsung or search the problem .
jje
Just contacted Samsung. They said - we have this tested without problem. I think that they tested on wrong way. Because I think, that all SGS3 must have this problem. I know about 3 phones with this problem. Samsung recommended factory reset, then visit in official servis room. I'll visit the servis room, and showroom too, to test SGS3 in showroom. I will post later result.
Hello,
Today reverse camera stopped working on my MTCC device (see attached pics).
When I put the car in reverse I get a green screen before the device boot up, and yellow sign after boot up.
Checked camera and cables on an external monitor, all fine. Must be something wrong with the device.
All other functions are fine.
Anyone had a similar issue? Suggestions before removing the device to check back connectors?
Thank you.
EDIT: This morning picture appeared for a few seconds, after that it just showed for a split of a second and then yellow sign. Later it does not show at all again.
EDIT2: removed the unit and checked connectors, no help. Tried second video input with the second camera and this other video input does not work also.
It seems that external video input is disabled and I can't find the way to activate it. sometimes reverse camera image appears for a split of the second so it makes me wonder that there is some sort of "lock" for video input.
Playing videos from sd card with video app works fine.
Installed different ROM and issue is still there.
Hello,
what is your car model and how/where is connected your rear cam to 12+ and ground? Back Light?
I would say your HU is defective likely a bad solder joint on the video mixer/switch if both inputs behave the same. If it starts working again when the temperature changes that is the sign.
Yeah, it must be a bad solder joint. I'll try to disassemble it one day and check soldering but for now, I just bought an additional small display for the camera, works ok but takes little more space
grgart said:
Hello,
Today reverse camera stopped working on my MTCC device (see attached pics).
When I put the car in reverse I get a green screen before the device boot up, and yellow sign after boot up.
Checked camera and cables on an external monitor, all fine. Must be something wrong with the device.
All other functions are fine.
Anyone had a similar issue? Suggestions before removing the device to check back connectors?
Thank you.
EDIT: This morning picture appeared for a few seconds, after that it just showed for a split of a second and then yellow sign. Later it does not show at all again.
EDIT2: removed the unit and checked connectors, no help. Tried second video input with the second camera and this other video input does not work also.
It seems that external video input is disabled and I can't find the way to activate it. sometimes reverse camera image appears for a split of the second so it makes me wonder that there is some sort of "lock" for video input.
Playing videos from sd card with video app works fine.
Installed different ROM and issue is still there.
Click to expand...
Click to collapse
I had a similar problem, the following solved it for me.
Go to SYSTEM settings, on my unit there was a menu item marked "Protocol Parameter settings" select this and you should see lots of settings relating to reverse camera, sensor and associated CANBUS options. Look for an option like "Reverse video resolution setting" and choose NTSC/PAL. After I changed that, all my video in started working again properly.
Hope this helps!
Hello sir ,
Are you fix this problem ? And how you fix it ? And there is photo to see where the soldiers you talk about so i can check and fix it in my head unit?
Thanks in advance
ipgoogle said:
Hello sir ,
Are you fix this problem ? And how you fix it ? And there is photo to see where the soldiers you talk about so i can check and fix it in my head unit?
Thanks in advance
Click to expand...
Click to collapse
Not mtcb...looks like MTCD
marchnz said:
Not mtcb...looks like MTCD
Click to expand...
Click to collapse
Yes it’s MTCD my fault
But can you help me and show me where the filter or resistance.. etc , any thing will relate to show image for reverse camera in screen of HU ? On the photos of mother board I attached it in the post please ?
OR if you have map to know everything in the mother board whats for?