so after hard bricking my device: http://forum.xda-developers.com/showthread.php?t=1731445 i got it into some kind of download mode. i also managed qpst to see my phone but i dont know how to use that. not sure if fastboot would recognize the phone in that download mode. i just wanted to know if there was a way to pull the stuff i had in the internal sd card like adb pull but adb wont see the phone. tmobile told me to go tomorrow so they can exchange it for another one but before i bricked it i copied some of the pics and vids from the camera 2 times using root explorer. the first time i didnt get all of them and the second time they all say they they were corrupted.
fcortes626 said:
so after hard bricking my device: http://forum.xda-developers.com/showthread.php?t=1731445 i got it into some kind of download mode. i also managed qpst to see my phone but i dont know how to use that. not sure if fastboot would recognize the phone in that download mode. i just wanted to know if there was a way to pull the stuff i had in the internal sd card like adb pull but adb wont see the phone. tmobile told me to go tomorrow so they can exchange it for another one but before i bricked it i copied some of the pics and vids from the camera 2 times using root explorer. the first time i didnt get all of them and the second time they all say they they were corrupted.
Click to expand...
Click to collapse
How were you able to get the phone on??Im in the same boat!Help me power on my phone please. Can you also link me to that driver you used?
taygutta said:
How were you able to get the phone on??Im in the same boat!Help me power on my phone please. Can you also link me to that driver you used?
Click to expand...
Click to collapse
My phone doesnt turn on. the screen is blank but when i plug it in to the pc i could here the usb tone on my pc. i think you can flash back using qpst but i dont know how to use it and the files are different than the odin files. just go back to where you bought it and tell them it wont turn on. just dont say you rooted it.
these are the drivers but they are for 64bit windows:
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
fcortes626 said:
My phone doesnt turn on. the screen is blank but when i plug it in to the pc i could here the usb tone on my pc. i think you can flash back using qpst but i dont know how to use it and the files are different than the odin files. just go back to where you bought it and tell them it wont turn on. just dont say you rooted it.
these are the drivers but they are for 64bit windows:
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
Click to expand...
Click to collapse
Ok I went to best buy and im waiting on a new one BUT I really need the data off the bricked phone. Where can I find qpst? Does it see your phone when you hook it up?
What did you guys flash?
bizdady said:
What did you guys flash?
Click to expand...
Click to collapse
i was stupid enought to try and flash cm9 fromthe international version. i just changed the build prop and the boot.img lol :silly:
The omega rom.. anyone No how to recover data from a dead phone?
taygutta said:
Ok I went to best buy and im waiting on a new one BUT I really need the data off the bricked phone. Where can I find qpst? Does it see your phone when you hook it up?
Click to expand...
Click to collapse
search it on google. its free but its not easy to use. if you dont nkow what you are doing yo could even make it worse. some one with a working phone needs sto get some hex files and stuff.
Thats odd, I read of some that flashed INT roms and were still able to turn on and use mskip's fix. Battery pulls wont do anything?
bizdady said:
Thats odd, I read of some that flashed INT roms and were still able to turn on and use mskip's fix. Battery pulls wont do anything?
Click to expand...
Click to collapse
No nothing works. Completely dead. Ima try using a jig
bizdady said:
Thats odd, I read of some that flashed INT roms and were still able to turn on and use mskip's fix. Battery pulls wont do anything?
Click to expand...
Click to collapse
nope. no download mode and no recovery.
taygutta said:
No nothing works. Completely dead. Ima try using a jig
Click to expand...
Click to collapse
i have read the jig wont work on devices that show a blank screen.you can try it tho. worth a try. i was going to try it but by the time the jig gets to me id rather just go tomorrow and hope tmobile actually does exchange it.
JIG will be a no-go, your only hope is either to try and use Qualcomm internal tools (which are not found on the internet) to flash, or JTAG.
DO NOT TRY TO FLASH ANY INTERNATIONAL ROMS EVER, YOU WILL HARD BRICK ON THESE PHONES!
Hunt3r.j2 said:
JIG will be a no-go, your only hope is either to try and use Qualcomm internal tools (which are not found on the internet) to flash, or JTAG.
DO NOT TRY TO FLASH ANY INTERNATIONAL ROMS EVER, YOU WILL HARD BRICK ON THESE PHONES!
Click to expand...
Click to collapse
I think I have the Qualcomm tool but I have no idea how to use them.
Ill look into this JTAG.
I just want the data off the phone.... thats all
taygutta said:
I think I have the Qualcomm tool but I have no idea how to use them.
Ill look into this JTAG.
I just want the data off the phone.... thats all
Click to expand...
Click to collapse
Hunt3r.j2 said:
JIG will be a no-go, your only hope is either to try and use Qualcomm internal tools (which are not found on the internet) to flash, or JTAG.
DO NOT TRY TO FLASH ANY INTERNATIONAL ROMS EVER, YOU WILL HARD BRICK ON THESE PHONES!
Click to expand...
Click to collapse
yup now i learned my lesson. the qualcom tool is the qpst i was talking about. but you need the files to flash to it. i think your files are lost bro. unless you send it to samsung so they can fix it. i dont think if they flash it will delete your files since they wont flash to the sd card partition. but then again im not sure if they will notice if you were rooted. next time im saving all my stuff into my external sd
Yea, now I just await the call from Bestbuy about getting more in. My JIG comes in tomorrow so we will see.
Not surprisingly to see people who ruin there device and want to exchange it for another. Of course even though it was there own fault for ruining it they shouldn't have to pay for the replacement.
Makes perfect sense for companies and carriers not to support rooting/flashing. Its bad enough already.
taygutta said:
Yea, now I just await the call from Bestbuy about getting more in. My JIG comes in tomorrow so we will see.
Click to expand...
Click to collapse
you could of also made your own lol
fcortes626 said:
My phone doesnt turn on. the screen is blank but when i plug it in to the pc i could here the usb tone on my pc. i think you can flash back using qpst but i dont know how to use it and the files are different than the odin files. just go back to where you bought it and tell them it wont turn on. just dont say you rooted it.
these are the drivers but they are for 64bit windows:
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
Click to expand...
Click to collapse
That is the reason Motorola locked their bootloaders, and others have raised insurance premiums. Please don't lie. Its insurance fraud first of all. If you ruined your device by flashing non-stock ROM's and such its time to man up, and dish out the money for a new phone. Don't make other's pay for your mistakes/missfortune. Do some more research on the other method of flashing and see if you can fix it. I wish you luck.
Sent from my DROIDX
fcortes626 said:
you could of also made your own lol
Click to expand...
Click to collapse
Ha! I tried that.... fail!!!!! I cant figure out which pins are 4 and 5.
Sniper_5 said:
That is the reason Motorola locked their bootloaders, and others have raised insurance premiums. Please don't lie. Its insurance fraud first of all. If you ruined your device by flashing non-stock ROM's and such its time to man up, and dish out the money for a new phone. Don't make other's pay for your mistakes/missfortune. Do some more research on the other method of flashing and see if you can fix it. I wish you luck.
Sent from my DROIDX
Click to expand...
Click to collapse
that was not helpful:crying: and i dint lie. i told the truth. i said "it wont turn on" and they didnt ask why. and i guess you dont read much. its hard bricked meaning you cant recover it unless you have the software samsung uses. so stop trolling my thread bro. read and you will notice i have tried to recover it.
taygutta said:
Ha! I tried that.... fail!!!!! I cant figure out which pins are 4 and 5.
Click to expand...
Click to collapse
me too lol
Related
Hello Guys!
My friend bought a SGS2 and he whanted to root it and to put MiUi on it. Now he unpluged it while it was in the Odin doing something with PIT...
It stopped and now he can't go anymore in the download mode and the phone remains black...
is that a full brick? is there any chance to run it again?
do you need more informations?
I looked throuth the threds but i couldnt find something like that...
i hope anyone can help
Will Samsung repair that with Warranty?
Can i know why he disconnected his phone during using something with Odin?!
He made a Solid Brick he cant do anything else than Warranty or JTAG..
BlackRainX said:
Can i know why he disconnected his phone during using something with Odin?!
He made a Solid Brick he cant do anything else than Warranty or JTAG..
Click to expand...
Click to collapse
haha he moved so fast with the mouse and hit the cable to the phone... i dont know exactly...
1. what is JTAG?
2. are you 100% shore that its a compleat brick?
3. is there no unbrickable or something like that?
Oli28 said:
haha he moved so fast with the mouse and hit the cable to the phone... i dont know exactly...
1. what is JTAG?
2. are you 100% shore that its a compleat brick?
3. is there no unbrickable or something like that?
Click to expand...
Click to collapse
If after trying multiple things like removing battery and what not and the phone won't boot or enter download mode, yup, it's a complete brick
achillies400 said:
If after trying multiple things like removing battery and what not and the phone won't boot or enter download mode, yup, it's a complete brick
Click to expand...
Click to collapse
nice wait not really...
but cant change anything... its sad for the device!
does enyone know if samsung will repair that??
i hope so
Oli28 said:
nice wait not really...
but cant change anything... its sad for the device!
does enyone know if samsung will repair that??
i hope so
Click to expand...
Click to collapse
It's not the most correct thing to do (actually, not at all, it was your friend's fault entirely, also voiding the warranty), but your friend can tell them that the device began to heat while charging, he unpluged it and it died, sometimes it happens...
As for the JTAG you asked on the other post, it's a physical connector inside the cellphone used to write the flash memory, it involves opening the device, pinning some terminals and programming via PC, it's pretty common on embedded devices to load the program for the first time.
There is still a chance to get the phone back to its senses!
you will need 2 people to do this
read all 5 steps then only proceed!
1. Remove the battery.
2.Start odin in your pc.
3.connect the mobile to the pc using cable.
4.keep pressing the keys required to get in download mode. i.e. power+home+volume down key.
5.ask someone else to put the battery in your phone keeping the keys pressed!.
if every thing goes right Odin will detect the phone Flash it with a good rom you know which works! and never take out the cell from odin when its being flashed until odin says Success!
pankajkundalia said:
There is still a chance to get the phone back to its senses!
you will need 2 people to do this
read all 5 steps then only proceed!
1. Remove the battery.
2.Start odin in your pc.
3.connect the mobile to the pc using cable.
4.keep pressing the keys required to get in download mode. i.e. power+home+volume down key.
5.ask someone else to put the battery in your phone keeping the keys pressed!.
if every thing goes right Odin will detect the phone Flash it with a good rom you know which works! and never take out the cell from odin when its being flashed until odin says Success!
Click to expand...
Click to collapse
Won't work if the PIT wasn't completed therefore leaving the device void of a bootloader, but it's worth the try, you have nothing to lose...
Wow, nice will try today... I will get the phone... would get a free Pizza if i would make it work again! thank you guys for your answers. I will tell you what happend...
is there a how ti for jtag? Could Be the solution...
Sent from my Desire HD RUNNY using XDA App
How to JTAG:
You had to solder stuff, it's safer to try warranty
Omega Frost said:
How to JTAG:
You had to solder stuff, it's safer to try warranty
Click to expand...
Click to collapse
Thank you!
suddenly this with the battery didnt worked so im gona send it to the warraty....
And when they dont repair it for free or less than 50 $ I have to send it to the JTAG..
thank you guys for all your support
Afaik u never supposed 2 use pit options in odin for gs2 otherwise u end up with a brick anyway regardless if u remove the cable or not. perhaps read more and be more careful if u ever decide 2 flash again. i would not be happy with that friend lol.
Sent from my GT-I9100 using xda premium
Ok so i was in my flash happy mood earlier today..
I saw that ICS slim was updated and was going to try that, well i had ICZen on my phone at the time and tried to flash Slim, well blah blah, it didnt work.. The op told me to flash from a rom that had cm9 (iczen has glitch) so i flashed Lithium MIUI--went back into recovery and started to wipe.. i wiped everything.. So i went to go flash ics slim, and as soon as i pressed 'Yes, install..' it was installing for a very short bit, then all a sudden a reboot and got stuck on the rainbow screen...
I cannot go back into recovery, but i can go into download mode.. BUT this is where the kicker is......
My computer doesnt recognize my device... ive installed driver after driver to get it to recognize. Well, no avail
Even tried installing the drivers on 6 other friends computers (at my college) and all of them still didnt recognize my device..... SMDH.. been trying to fix this all day and im pissed.
Any ideas what to do? Hate to go out and buy another phone......
And before yall say 'you cant flash miui and then go straight to ics, you have to odin' --- No, i did it all the time.. This time something went wrong and idk what
Wow, 158 views and no replies..
Guess i did permanently brick it.. ok
If you can get in to download mode, you're not bricked.
I've read/heard that since our ICS roms are built off of Nexus code, you need to install the nexus drivers. Have you tried doing that? Also, are you sure it's not a bad cable? Try another samsung cable (if you can get a hold of one) to be sure.
dpaul007 said:
If you can get in to download mode, you're not bricked.
I've read/heard that since our ICS roms are built off of Nexus code, you need to install the nexus drivers. Have you tried doing that? Also, are you sure it's not a bad cable? Try another samsung cable (if you can get a hold of one) to be sure.
Click to expand...
Click to collapse
yes, ive installed the nexus drivers too.. im positive its not a bad cable, ive used it on my computer before hand.. and yea, ive tried another cable as well..
I remember experiencing something like this a while back. i softbricked, could enter download mode, but the computer would not pick up my phone. i dont remember an exact solution, i just remember downloading all sorts of drivers and eventually i got it to pick up.
matholomus said:
Wow, 158 views and no replies..
Guess i did permanently brick it.. ok
Click to expand...
Click to collapse
as far as views:replies, you have to realize that even though you are in panic mode (weve all been there, so we know how you feel), that doesnt necessarily mean people are automatically going to have an answer for you. in this type of situation, its virtually impossible for anyone to tell you an exact solution (if there is one) unless they are sitting right next to you.
TopShelf10 said:
I remember experiencing something like this a while back. i softbricked, could enter download mode, but the computer would not pick up my phone. i dont remember an exact solution, i just remember downloading all sorts of drivers and eventually i got it to pick up.
as far as views:replies, you have to realize that even though you are in panic mode (weve all been there, so we know how you feel), that doesnt necessarily mean people are automatically going to have an answer for you. in this type of situation, its virtually impossible for anyone to tell you an exact solution (if there is one) unless they are sitting right next to you.
Click to expand...
Click to collapse
Wow really? Damn.. remember what kind of drivers? ive used the samsung usb drivers and nexus s drivers..
But yea, i guess ur right.. sorry for the other post, i was (and still am a little) mad at the time
Try installing kies or kies mini, it did the trick for me when i was in a similar situation
Sent from my SGH-T959 using Tapatalk
matholomus said:
Wow really? Damn.. remember what kind of drivers? ive used the samsung usb drivers and nexus s drivers..
But yea, i guess ur right.. sorry for the other post, i was (and still am a little) mad at the time
Click to expand...
Click to collapse
i honestly wish i could tell you exactly, this was a whiiile back, prob over a year.
all i remember was a lot of installing/uninstalling/reinstalling drivers, rebooting comp/phone, unplugging/replugging....it seemed like there was no hope so all i could do all day was fiddle and just hope and pray that i would do something right and the phone would read
im not going to lie though, it does sound pretty bad that youve tried it on multiple computers. that means your possible problems are (from most to least severe):
1. Busted USB port
2. Wrong drivers installed
3. Malfunctioning chord
Although i WILL say: make sure all of your USB connections are free of lint, gunk, etc. I know this sounds like one of those stupid, default troubleshooting steps, and i always looked down my nose at it. however there was a point in time the the comp wouldnt pick up my phone. i tried eeeeverything to remedy it and nothing was working. sure enough, i looked at the standard usb connector on my charging chord and it was FILLED with pocket lint. once i picked it out, BAM good as new!!
bfranklin1986 said:
Try installing kies or kies mini, it did the trick for me when i was in a similar situation
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Did kies as well lol.. didnt work.. when it told me to connect my mobile device, i did. but it didnt register
TopShelf10 said:
i honestly wish i could tell you exactly, this was a whiiile back, prob over a year.
all i remember was a lot of installing/uninstalling/reinstalling drivers, rebooting comp/phone, unplugging/replugging....it seemed like there was no hope so all i could do all day was fiddle and just hope and pray that i would do something right and the phone would read
im not going to lie though, it does sound pretty bad that youve tried it on multiple computers. that means your possible problems are (from most to least severe):
1. Busted USB port
2. Wrong drivers installed
3. Malfunctioning chord
Although i WILL say: make sure all of your USB connections are free of lint, gunk, etc. I know this sounds like one of those stupid, default troubleshooting steps, and i always looked down my nose at it. however there was a point in time the the comp wouldnt pick up my phone. i tried eeeeverything to remedy it and nothing was working. sure enough, i looked at the standard usb connector on my charging chord and it was FILLED with pocket lint. once i picked it out, BAM good as new!!
Click to expand...
Click to collapse
i literally restarted my computer 7-9 times from uninstalling and installing driver after driver.. been doing this all morning.. no class, lol thank god. so im in the dorm getting my nerd on..
tried it again on 2 other computers (installing drivers and what not) didnt work.. Tried 2 other usb cables, didnt work..
Tried ur method of cleaning usb ports, didnt work lol.. (i blew in them/phone too)..
im currently on C.L. lookin for a new phone, I WOULD hate to have to leave the vibrant community.. yall been great with roms/drama LOL..
im slowly losing hope on this .. but im continuing to try and fix this
Couple of things. Why don't you go over to the Dev section and download the AIO toolbox. Tiber I think has a link in one of the last posts that should still be working. It has all the pit/tar files, drivers (I know, I know), Odin and is very handy. Don't forget to make usre you have the .net files too.
Then try this
Make sure you have ODIN OPEN with admin privileges!
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
You don't necessarily need the download mode image to be present. As long as you are getting the COM ID to light up yellow in ODIN, just flash back to stock like normal.
Click to expand...
Click to collapse
If all else fails, just keep trying. It boots up to Download mode so it is salvagable and not hard bricked. If you do end up finding a new phone on CL and want to donate you Vibrant, i am looking for one to work on some things with.
Woodrube said:
Couple of things. Why don't you go over to the Dev section and download the AIO toolbox. Tiber I think has a link in one of the last posts that should still be working. It has all the pit/tar files, drivers (I know, I know), Odin and is very handy. Don't forget to make usre you have the .net files too.
Then try this
If all else fails, just keep trying. It boots up to Download mode so it is salvagable and not hard bricked. If you do end up finding a new phone on CL and want to donate you Vibrant, i am looking for one to work on some things with.
Click to expand...
Click to collapse
thanks... but the aio toolbox is not going to the download link for me. the download link is down or something.
i did download the .net files tho, jus cant download the toolbox
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
When you say yours (and 6 others) don't recognize the phone, are you talking about Mass Storage mode or do all 6 of your friends have Odin installed on their computers? Might seem like a BS question and I am sorry about that but it is a one or the other type situation. It will be in download mode OR mass storage.
Can you boot into recovery by chance?
Depending on what bootloader you have it will be (Froyo) Vol+/- and power or (GB) Vol+ and Power. Also not to sound noob-ish but just bc you have a GB ROM doesnt mean you have GB bl's. Dealt with that with someone else this week and fought me tooth and nail over it.
if you have clockwork mod installed you can put a rom on your SD card through your computer, wipe your phone and then flash the from with a full wipe.
Sent from my HTC Desire HD using xda premium
That is what I am getting at.
If he can get into CWR then he can mount the phone to the computer in Mounts and Storage, put a simple 2.2 ROM on there and get it to boot up so that it works. then figure out the driver thing later on once we can get it to fully boot up.
Woodrube said:
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
When you say yours (and 6 others) don't recognize the phone, are you talking about Mass Storage mode or do all 6 of your friends have Odin installed on their computers? Might seem like a BS question and I am sorry about that but it is a one or the other type situation. It will be in download mode OR mass storage.
Can you boot into recovery by chance?
Depending on what bootloader you have it will be (Froyo) Vol+/- and power or (GB) Vol+ and Power. Also not to sound noob-ish but just bc you have a GB ROM doesnt mean you have GB bl's. Dealt with that with someone else this week and fought me tooth and nail over it.
Click to expand...
Click to collapse
cant reboot into the bootloader nor recovery.. the only thing i can do is download mode..
I have the GB bootloader.. im sure of it lol
and yes i installed odin and all the files on all 6 of my friends computer.. none of them worked
davil544 said:
if you have clockwork mod installed you can put a rom on your SD card through your computer, wipe your phone and then flash the from with a full wipe.
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
if i could get into recovery, i wouldnt be posting something like this LOL.. ive unbricked my phone before (that was when my comp recognized the device, now its not)
My device is not recognized by the computer, so my sd cards dont show on the comp
Woodrube said:
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
Click to expand...
Click to collapse
oh and i did do the little tricks you said, i found that op..
that person had the same problem as me and everyone tried to help, they gave him/her links and everything.. i followed with the links too, and just like that person, none of them worked for me either
saw the download link that oldecrow posted.. its working.. downloading now
Ok. Keep trying once it is downloaded and let us know how it is going. I am getting ready to leave work soon, so I won't be on until later tonight but there are plenty of others that can help.
There's also the One-Click Vibrant DeBrick from Adam Outler. I've used it on my netbook on phones with your identical problem and its never failed yet.
Also, Heimdall on Ubuntu will flash it no problem, it does NOT need drivers like Windows does...
http://www.glassechidna.com.au/products/heimdall/
Sent from my SGH-T959 using XDA App
Up and running!!!!!!!!!!!!!!!1
NEVER WOULD HAVE THPOUGHT!! (well i did but...) anyways im up and running now!!!! Wow, idk what happened... it just started working.. i plugged it in and odin recognized it!!..
im on 2.1 again lol.. so all i need to do is go back into recovery and reinstall packages right?
Did i lose root? i forgot
So like title says, i think i might have messed up my bootloads on my galaxyplayer 4.0, it won't even turn on, or the screen won't turn on nor will it go to download mode, i hear jtag can fix this, but besides that, is there anything i can do that won't cost $40?
muji8u said:
So like title says, i think i might have messed up my bootloads on my galaxyplayer 4.0, it won't even turn on, or the screen won't turn on nor will it go to download mode, i hear jtag can fix this, but besides that, is there anything i can do that won't cost $40?
Click to expand...
Click to collapse
Maybe you could try the unbrickable resurector or a usb jig. Also could you describe what you did to get there.
idk y but i was jsut trying some stuff, tried to install some new o.s's on it and stuff, but it hink i got the bootloader for another phone and put it on it, i tried a usb jig but i can't get into download mode
muji8u said:
idk y but i was jsut trying some stuff, tried to install some new o.s's on it and stuff, but it hink i got the bootloader for another phone and put it on it, i tried a usb jig but i can't get into download mode
Click to expand...
Click to collapse
I'm not a professionnal but if you flashed another device bootloader onto your device I don't think there is really hope. I think JTAG is the only choice as it can flash bootloader (I think but not sure). Sorry but I can't help you anymore.
ti-pich said:
I'm not a professionnal but if you flashed another device bootloader onto your device I don't think there is really hope. I think JTAG is the only choice as it can flash bootloader (I think but not sure). Sorry but I can't help you anymore.
Click to expand...
Click to collapse
Not true, I flashed a 4.0 file unto my 5.0 player and I was able to fix it/get it working.
TheKryptonite said:
Not true, I flashed a 4.0 file unto my 5.0 player and I was able to fix it/get it working.
Click to expand...
Click to collapse
You probably flashed a 4.0 rom not a bootloader. Those are really different. I really doubt you could have done this if you flashed a bootloader even if the device are really the same as the bootloader is needed to get into download mode. Again, I'm not a professionnal but this is really unlikely to happen.
My 4.0 US player stopped working too. Got a 2 dollar jig off Amazon and went right into download mode. Make sure the jig is correct. And make sure you let you batter sit out of player about 20 seconds first.
Sent from my YP-G1 using Tapatalk 2
Hey guys, big n00b here. I'll admit, I made a very fatal and somewhat idiotic mistake... ended up flashing a bad rom (illusions) to my phone. Unfortunately, after rebooting to test it, the phone completely stopped booting. Can't get into download or recovery mode. Does NOTHING when power is held. I have tried the microSD fix.. went out and got a 16GB card... no luck. This is why I think the bootloader is screwed up. I tried making a USB jig and that didn't work either... I have one coming in the mail, but that's going to be too long to wait.
My computer (running ubuntu by the way) detects the phone:
"Bus 003 Device 069: ID 05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)"
from lsusb.
Guys, PLEASE tell me that we can fix it ... without JTAG or replacing the EMMC... both of those are a bit too much. Would rather just say I spilled pop on it...
I have nearly lost all hope because NOTHING has worked. It isn't showing signs of life... Is there hope?
Is it possible that I didn't try the microSD fix enough times? I mean, I read that you may have to do the write a few times... which I did... :/
sci4me said:
Hey guys, big n00b here. I'll admit, I made a very fatal and somewhat idiotic mistake... ended up flashing a bad rom (illusions) to my phone. Unfortunately, after rebooting to test it, the phone completely stopped booting. Can't get into download or recovery mode. Does NOTHING when power is held. I have tried the microSD fix.. went out and got a 16GB card... no luck. This is why I think the bootloader is screwed up. I tried making a USB jig and that didn't work either... I have one coming in the mail, but that's going to be too long to wait.
My computer (running ubuntu by the way) detects the phone:
"Bus 003 Device 069: ID 05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)"
from lsusb.
Guys, PLEASE tell me that we can fix it ... without JTAG or replacing the EMMC... both of those are a bit too much. Would rather just say I spilled pop on it...
I have nearly lost all hope because NOTHING has worked. It isn't showing signs of life... Is there hope?
Is it possible that I didn't try the microSD fix enough times? I mean, I read that you may have to do the write a few times... which I did... :/
Click to expand...
Click to collapse
There is a guy over on android forums named shappypenguin, he may or may not be on XDA, but he has done magic on supposedly hard bricked phones. The fact that your computer recognizes the phone is a good thing. Does the phone go into download mode? If so, try downloading ODIN. It's literally a phone saver.
j61101 said:
There is a guy over on android forums named shappypenguin, he may or may not be on XDA, but he has done magic on supposedly hard bricked phones. The fact that your computer recognizes the phone is a good thing. Does the phone go into download mode? If so, try downloading ODIN. It's literally a phone saver.
Click to expand...
Click to collapse
I WISH it went into download mode, if it did I would be fine... and this thread wouldn't exist.
He is on XDA.
Microsd trick should still work, you sure you're doing it right?
DrFredPhD said:
Microsd trick should still work, you sure you're doing it right?
Click to expand...
Click to collapse
No lol, I'm not sure. I have a 16 GB Class 10 card and my phone is 16GB. I have tried multiple images and multiple different guides. I THINK the phone is trying to use the card... but not working for some reason.
Like I said, I have tried a lot of images... but I have no reliable way to confirm if they are the EXACT one I need.
One of the ones It tried was called debrick_sph_l710... but it doesn't seem to work.
To clarify, my phone is a Samsung Galaxy S3 on the Sprint network. Model SPH-L710.
I can keep trying the microSD...
Oh ok, I only know it should work on i9300. Not sure if it does for your model, you might get better help asking in your device specific forum.
Forgive me for bumping this early, but I have an expensive paperweight.
Is there any hope? Or will this require JTAG...?
If it doesn't go into download mode then usb jig, otherwise new motherboard.
boomboomer said:
If it doesn't go into download mode then usb jig, otherwise new motherboard.
Click to expand...
Click to collapse
Well, mine is in the main. I suppose I had better pray to the gods of Android that it works.
sci4me said:
No lol, I'm not sure. I have a 16 GB Class 10 card and my phone is 16GB. I have tried multiple images and multiple different guides. I THINK the phone is trying to use the card... but not working for some reason.
Like I said, I have tried a lot of images... but I have no reliable way to confirm if they are the EXACT one I need.
One of the ones It tried was called debrick_sph_l710... but it doesn't seem to work.
To clarify, my phone is a Samsung Galaxy S3 on the Sprint network. Model SPH-L710.
I can keep trying the microSD...
Click to expand...
Click to collapse
What version of Android were you running before you bricked it? It probably doesn't work because you aren't using the correct version.
TheKryptonite said:
What version of Android were you running before you bricked it? It probably doesn't work because you aren't using the correct version.
Click to expand...
Click to collapse
The rooted (and working) version was 4.4.2. Yes, this happened due to a incorrect version for the phone being flashed.
Ah, that explains why (I meant that it didn't work because you weren't using the correct version of your debrick image), click on the link below, write the debrick file to your SD card, and it should work.
http://forum.xda-developers.com/showthread.php?t=2740469
Sent from my SPH-L710 using XDA Free mobile app
Hi all, I was in the process of trying to put Android 5.0 on my Verizon G3. I was following this thread:http://forum.xda-developers.com/verizon-lg-g3/general/howto-update-to-stock-lollipop-23a-t3044398. I downgraded to 10b, upgraded to 12b and then the last step, which is when things went wrong is I was upgrading to 23b (5.0) via the Action Launcher method and when the device when to boot back up to install the update it failed.
Im now stuck to where I can not power up the device, I get the LG screen and it says "Secure Boot Error/Certificate Error".. something along those lines. I lost the ability to get into download mode, it tries and then shows the boot error screen before going black.. the notification lights also flash amber and blue. The only thing I can get into is Recovery mode by Volume down + power but I tried every option.. safe mode, wipe cache, factory reset, usb debug mode all give me the boot error screen before going black.
Any suggestions before I trash the device?
I don't know how to get out of that situation, but if you post in the Verizon G3 Q&A section, someone might have some ideas.
Otherwise, I'd go to a Verizon store, tell them that you received am OTA update and left your phone like that.
roirraW "edor" ehT said:
I don't know how to get out of that situation, but if you post in the Verizon G3 Q&A section, someone might have some ideas.
Otherwise, I'd go to a Verizon store, tell them that you received am OTA update and left your phone like that.
Click to expand...
Click to collapse
This is the VZW G3 Q&A no?
I called tech, said I received an update and wasn't sure what happened but the phone wont start now, its going through insurance with the $100 deductible but my concern now is, the tech said if they find it was modded in any way I would be charged $300. The phones not rooted or anything, just a bad file I tried to apply I guess through Action Launcher. But with the notification lights flashing different colors and a boot error message I feel busted lol.
If I can somehow fix the phone I would like to try. I've been in bad situations with other devices and have always found a way out, but this being my first LG device I'm feeling lost and worried its too late.
Cyber Warrior said:
This is the VZW G3 Q&A no?
I called tech, said I received an update and wasn't sure what happened but the phone wont start now, its going through insurance with the $100 deductible but my concern now is, the tech said if they find it was modded in any way I would be charged $300. The phones not rooted or anything, just a bad file I tried to apply I guess through Action Launcher. But with the notification lights flashing different colors and a boot error message I feel busted lol.
If I can somehow fix the phone I would like to try. I've been in bad situations with other devices and have always found a way out, but this being my first LG device I'm feeling lost and worried its too late.
Click to expand...
Click to collapse
Blame Tapatalk. Sorry about that, LOL.
I understand. Don't blame me if I'm wrong, but I doubt if they'll be able to tell. First thing they'll do is put it back to Stock with some advanced tool of their, and I'm sure it'll wipe internal storage where the file was.
roirraW "edor" ehT said:
Blame Tapatalk. Sorry about that, LOL.
I understand. Don't blame me if I'm wrong, but I doubt if they'll be able to tell. First thing they'll do is put it back to Stock with some advanced tool of their, and I'm sure it'll wipe internal storage where the file was.
Click to expand...
Click to collapse
lol. yeah I hope so, at this point I really would like to just fix it though so I dont get stuck paying insurance.
Cyber Warrior said:
lol. yeah I hope so, at this point I really would like to just fix it though so I dont get stuck paying insurance.
Click to expand...
Click to collapse
Maybe when all this rooted stock LG Lollipop news and ROM-making dies down some, bump this thread if noone more knowledgeable comes along and shares some info in the meantime.
Sorry man. Good luck!
Cyber Warrior said:
lol. yeah I hope so, at this point I really would like to just fix it though so I dont get stuck paying insurance.
Click to expand...
Click to collapse
This is for the g2 but I believe it will work. You'll need to run linux or a linux live cd and find the correct files for vs985. Theyre on autoprimes site. If you cant find them reply to this and ill track down the url.
http://forum.xda-developers.com/showthread.php?t=2582142
That should work , I bricked my g2 and was able to fix it using
Fastboot commands, I'm thinking you can use adb commands
And fix your phone. You basically have to push .img files to
The phone through adb. Good luck
Edit, I could always swap mother boards for under two hundred
And just don't even go through your insurance. Check eBay and
Amazon they sell them.
hawkswind1 said:
This is for the g2 but I believe it will work. You'll need to run linux or a linux live cd and find the correct files for vs985. Theyre on autoprimes site. If you cant find them reply to this and ill track down the url.
http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
Yeah I was looking at that last night.. I wouldn't have to be rooted though? I'll see if I can find the files I need. I've never run Linux before but its worth a shot. I was kind of discouraged when I read about a similar G3 user who tried the process with no luck.
Alright I found these.. http://forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958
Would those do? And what mode would I put the device in? The computer does not recognize the phone..download mode won't work and recovery mode options won't work either. I'm familiar with adb and fastboot but if someone could post the commands I need it would be helpful..in the meantime I'm going to try and see if I can find them myself. Thanks
Cyber Warrior said:
Alright I found these.. http://forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958
Would those do? And what mode would I put the device in? The computer does not recognize the phone..download mode won't work and recovery mode options won't work either. I'm familiar with adb and fastboot but if someone could post the commands I need it would be helpful..in the meantime I'm going to try and see if I can find them myself. Thanks
Click to expand...
Click to collapse
Does your phone even show as qhsusb_bulk or similar in device manager while in Linux? Make sure you use the img's from the firmware you were installing when you had the problem. I assume 23B. The commands are in the link I posted above but keep in mind they are for the G2. It's likely to DD commands, ie. partition locations are different on the G3, I don't know the correct ones. Maybe some research can dig them up. Doesn't look too bad assuming you can get linux to recognize the phone in some form, which it should and that you're able to verify the location of the partitions for G3. Wish I could be more help. It was a long time ago when I went through this on the G2
Cyber Warrior said:
This is the VZW G3 Q&A no?
I called tech, said I received an update and wasn't sure what happened but the phone wont start now, its going through insurance with the $100 deductible but my concern now is, the tech said if they find it was modded in any way I would be charged $300. The phones not rooted or anything, just a bad file I tried to apply I guess through Action Launcher. But with the notification lights flashing different colors and a boot error message I feel busted lol.
If I can somehow fix the phone I would like to try. I've been in bad situations with other devices and have always found a way out, but this being my first LG device I'm feeling lost and worried its too late.
Click to expand...
Click to collapse
I've never had to do insurance for a bad update.
I have TEC and in those cases where there is absolutely no damage, I get a replacement for free.
YMMV but I wouldn't pay $100.
hawkswind1 said:
This is for the g2 but I believe it will work. You'll need to run linux or a linux live cd and find the correct files for vs985. Theyre on autoprimes site. If you cant find them reply to this and ill track down the url.
http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
Hi I have Linux up and running.. can you help me with what files I need please?
Cyber Warrior said:
Hi I have Linux up and running.. can you help me with what files I need please?
Click to expand...
Click to collapse
It's a bit confusing the way it's written in the guide. I believe you use the 23b files in your case. Reread it to be sure.
The files are here- http://forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958
More files here if needed http://downloads.codefi.re/autoprime/LG/LG_G3
I'm not even sure my phone is being recognized..at least nothing pops up. I'm not familiar with terminal commands in linux. At this point I'm lost.. I messaged auto prime to see if he could help out. I'm not even sure where to begin converting that g2 guide for use with the g3.
For the hek of it I'm putting the android SDK on Linux just to see if I can get fastboot to recognize the phone.
http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853 you can try this from Windows if your phone is showing up as Qualcomm in device manager.
dwheimerl said:
http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853 you can try this from Windows if your phone is showing up as Qualcomm in device manager.
Click to expand...
Click to collapse
IS there a driver to get my phone to be recognized as Qualcomm?? I think i found a way to fix mine but i need the driver
danetbra63 said:
IS there a driver to get my phone to be recognized as Qualcomm?? I think i found a way to fix mine but i need the driver
Click to expand...
Click to collapse
Qualcomm driver is on this page.. 252-253 http://forum.xda-developers.com/showthread.php?t=2582142&page=252
Good luck, I was able to get the phone recognized as qhsusb_bulk, then as qualcomm 9008 but eventually gave up after spending over 2 days researching and trying different methods before i threw in the towel.. I even had help via remote access to my computer with no luck. Check the thread I linked there were a few guys willing to help out.
My replacement G3 actually arrived today.. still cant believe I hard bricked a device.
Cyber Warrior said:
Qualcomm driver is on this page.. 252-253 http://forum.xda-developers.com/showthread.php?t=2582142&page=252
Good luck, I was able to get the phone recognized as qhsusb_bulk, then as qualcomm 9008 but eventually gave up after spending over 2 days researching and trying different methods before i threw in the towel.. I even had help via remote access to my computer with no luck. Check the thread I linked there were a few guys willing to help out.
My replacement G3 actually arrived today.. still cant believe I hard bricked a device.
Click to expand...
Click to collapse
What's the next step after the 9008? i made it that far but idk what to do next.
danetbra63 said:
What's the next step after the 9008? i made it that far but idk what to do next.
Click to expand...
Click to collapse
I'm assuming using the tool to push the img files but I didn't get that far.