Hello,
I'm sorry if this question was already been made before.
I've installed MiniCM9 Rom with ICS 4.0 successefully, but i've a major problem, my phone does not connect to the Vodafone network mobile provider. I have a Vodafone simcard and my phone doesn´t get connection to any network.
Anyone could help?
Additional Info: Seems that the phone doesn´t recognize the simcard
- Check if your device is ROOTED.
- Maby try to reflash rom, that worked for me to when wifi not worked.
ricjps said:
Hello,
I'm sorry if this question was already been made before.
I've installed MiniCM9 Rom with ICS 4.0 successefully, but i've a major problem, my phone does not connect to the Vodafone network mobile provider. I have a Vodafone simcard and my phone doesn´t get connection to any network.
Anyone could help?
Additional Info: Seems that the phone doesn´t recognize the simcard
Click to expand...
Click to collapse
It happened when you unlocked the bootloader, but you failed to chedk before you went ahead and flashed the custom kernel and ROM. Restore to original firmware, relock the bootloader and hope that it will fix your problem.
SmG67 said:
It happened when you unlocked the bootloader, but you failed to chedk before you went ahead and flashed the custom kernel and ROM. Restore to original firmware, relock the bootloader and hope that it will fix your problem.
Click to expand...
Click to collapse
Many thanks for your answer, but
How can i do that?
ricjps said:
Many thanks for your answer, but
How can i do that?
Click to expand...
Click to collapse
Use PC Companion to repair your phone as follows:
Leave your phone unplugged from your computer
Start PC Companion and choose update
It won't find your phone and offer you a repair option
Choose that and follow the steps
When it asks to connect your phone in flashmode, you phone needs to be turned off, you press the back-button and plug in the usb-cable, it will start flashing the original firmware
After it is done you open S1Tool
Press the Restore button, it will relock your bootloader
Hopefully your simcard will be detected again after that.
SmG67 said:
Use PC Companion to repair your phone as follows:
Leave your phone unplugged from your computer
Start PC Companion and choose update
It won't find your phone and offer you a repair option
Choose that and follow the steps
When it asks to connect your phone in flashmode, you phone needs to be turned off, you press the back-button and plug in the usb-cable, it will start flashing the original firmware
After it is done you open S1Tool
Press the Restore button, it will relock your bootloader
Hopefully your simcard will be detected again after that.
Click to expand...
Click to collapse
And if i insist to install ICS 4 (i have difficulties ti be beaten by informatics), what step did i miss/wrong in the process of installing ICS 4?
Edit:
I run se S1tool with the phone still in the condition before in it says that it has
SEMC Simlock Certificate.
What it means? Does it means that it should recognize the simcard?
check radiomodule version
ricjps said:
And if i insist to install ICS 4 (i have difficulties ti be beaten by informatics), what step did i miss/wrong in the process of installing ICS 4?
Edit:
I run se S1tool with the phone still in the condition before in it says that it has
SEMC Simlock Certificate.
What it means? Does it means that it should recognize the simcard?
Click to expand...
Click to collapse
It should work yes, did you check your firmware and baseband versions before you installed everything? they should be 2.1.1.A.0.6 or 2.1.1.C.0.0 for the firmware and alotofnumers ending with 4015 for the baseband.
Still go back to stock first and relock your bootloader, and hope your phone will work in that condition Then you can try again.
nonamerzz said:
check radiomodule version
Click to expand...
Click to collapse
How?
Settings - About Phone, it should list firmware version and baseband version (that's what he means by radiomodule i think)
SmG67 said:
Settings - About Phone, it should list firmware version and baseband version (that's what he means by radiomodule i think)
Click to expand...
Click to collapse
Firmware: 2.1.1.A.0.6
Kernel: 2.6.29
Baseband: ...4015
ricjps said:
Firmware: 2.1.1.A.0.6
Kernel: 2.6.29
Baseband: ...4015
Click to expand...
Click to collapse
ok
Did you get your phone to connect to your network again?
SmG67 said:
ok
Did you get your phone to connect to your network again?
Click to expand...
Click to collapse
Yes. And the network is working.
Know, i've made the process once again, and the phone asks me for the pinlock, and after that the SIM network unlock PIN.
Additional Info: It's Working!!!!! Yeahhhhh. Many thanks to you...
Related
I have tried everything, I relock the bootloader and it has turned a capital R, I tried to install backups, I tried to reinstall the original seus.
and nothing. I still have the cell phone signal!
Help me please guys, you are hard on the issue.
excuseme for my english
edit: i unlock simlock with setool2
kmilopunk said:
I have tried everything, I relock the bootloader and it has turned a capital R, I tried to install backups, I tried to reinstall the original seus.
and nothing. I still have the cell phone signal!
Help me please guys, you are hard on the issue.
excuseme for my english
edit: i unlock simlock with setool2
Click to expand...
Click to collapse
I think this is important:
whenever I get the start menu choose the language (so I have chosen before) and also whenever I get "insert sim card and restart the phone"
kmilopunk said:
I think this is important:
whenever I get the start menu choose the language (so I have chosen before) and also whenever I get "insert sim card and restart the phone"
Click to expand...
Click to collapse
Maybe ur simlock got reinstalled.. spyderX had warned of this in his guide here maybe u can try to use setool2 to re-sim-unlock your phone???
Simlock sucks!!!
as it will hurt my pocket money, but good.
I have to re-pass the setool2 with bootloader unlocked already?
or if not, I can use another method of release, or has to be the setool2 mandatory?
Thanks for resolving my doubts.
kmilopunk said:
as it will hurt my pocket money, but good.
I have to re-pass the setool2 with bootloader unlocked already?
or if not, I can use another method of release, or has to be the setool2 mandatory?
Thanks for resolving my doubts.
Click to expand...
Click to collapse
setool is free right??? google it u can download it and save some pocket money
Not sure of the process though
rosshalz said:
setool is free right??? google it u can download it and save some pocket money
Not sure of the process though
Click to expand...
Click to collapse
what happens is you need a special box and that's what I have no
be that if I use the unlock code method, I will serve? or must be for the same use.
I unlock my bootloader in the u20i, and i lost de Wi-Fi ( ERROR). So i install again the CM7 Rom + FullWipe and work!
I don't now about you signal, just work here the Wi-Fi.
Cloulu said:
I unlock my bootloader in the u20i, and i lost de Wi-Fi ( ERROR). So i install again the CM7 Rom + FullWipe and work!
I don't now about you signal, just work here the Wi-Fi.
Click to expand...
Click to collapse
I try to follow what I wanted to do: Install DX nakernel ginger.
but it still did not work and return it to the officer, and I do not work ....
Right now I have left is to test again for setool2 fun ... if that does not fix it do not know what else to do. Here in Colombia, the service technician's own cell phone companies is not be very good to say
hello, I could have power again
but I returned to block the bootloader.
may be that you unlock? without losing the signal again?
I have similar problem:
I have applied the MiniCM7-2.1.1 on my unlocked phone. Everything went fine but the signal has been lost.
The phone stills finds the network carriers in my country.
But when I try to choose the one I use, it says registering network and just after that "SIM does not allow conection to the network".
I've tried two different SIM form different carriers (I purchased an unlocked phone) with the same results
After MiniCM7-2.1.1 It was working OK
Now I've tried to SEUS and it went back succesfully to stock 2.1
But The signal problem persists.
Could you please advise / help??
Firmware 2.1-update1
Baseband the one ending 4015
Kernel 2.6.29
[email protected]#1
Compilation 2.1.1.A.0.6
i didnt bought the cellphone unlock, was released by setool2 and the solution was to move the backup you had made the program.
persisted bootloader lock!
I can do, be that doing the process from the stock 2.1 will now leave you?
guzeven said:
I have similar problem:
I have applied the MiniCM7-2.1.1 on my unlocked phone. Everything went fine but the signal has been lost.
The phone stills finds the network carriers in my country.
But when I try to choose the one I use, it says registering network and just after that "SIM does not allow conection to the network".
I've tried two different SIM form different carriers (I purchased an unlocked phone) with the same results
After MiniCM7-2.1.1 It was working OK
Now I've tried to SEUS and it went back succesfully to stock 2.1
But The signal problem persists.
Could you please advise / help??
Firmware 2.1-update1
Baseband the one ending 4015
Kernel 2.6.29
[email protected]#1
Compilation 2.1.1.A.0.6
Click to expand...
Click to collapse
Did you get this fixed? I am having exactly the same problem. Any help you can give would be appreciated
I'm the same situation :'(
try flashing a baseband which ends wit 06 at the end..
hit thanx if dis helped u
---------- Post added at 09:33 PM ---------- Previous post was at 09:19 PM ----------
ScalesOnline said:
Did you get this fixed? I am having exactly the same problem. Any help you can give would be appreciated
Click to expand...
Click to collapse
download s1 tool and check the simlock status and unlock the bootloader with the instructions provided in the following thread
forum.xda-developers.com/showthread.php?t=1256969
if that did not work try flashing different baseband
hit thanx if diz helped u
Hey, I have an SK17i locked on Orange that I flashed with stock UK firmware .58 (2.3.4) from WotanServer and now the phone wont accept ANY sim cards, nor connect to any WIFI signal.
It also loops in the regard that it wont save settings and asks to select language everytime I start the phone.
Ive tried a few different firmwares from the wotan server. Tried using flashtool with firmware downloaded from these forums, with no success.
Any help really appreciated as im struggling to find what the problem is.
Puju said:
Hey, I have an SK17i locked on Orange that I flashed with stock UK firmware .58 (2.3.4) from WotanServer and now the phone wont accept ANY sim cards, nor connect to any WIFI signal.
It also loops in the regard that it wont save settings and asks to select language everytime I start the phone.
Ive tried a few different firmwares from the wotan server. Tried using flashtool with firmware downloaded from these forums, with no success.
Any help really appreciated as im struggling to find what the problem is.
Click to expand...
Click to collapse
try this firmware and flash it using flashtool
make sure to wipe everything and don't exclude anything
Download Sk17i Firmware Global
Thanks for the firmware, I did try it but I had the same issues.
I resolved it now, I had to unlock the phone (Network SIM Lock) and now its working fine. I wouldnt want to guess at why the original SIM that came with the phone wouldnt work on a debranded firmware but maybe someone here will incase someone else bumps into this problem.
Thanks.
Please somebody i don`t know what to do more!!!
i have a rooted xperia x10 wich doesn`t log onto the network. my carrier is Orange. the sim card is a new one, cauze i changed it. i have full signal bars but when i enter settings/wireless/network/search network - it finds orange 2G and 3G but when i tap on it it says at first logging on Orange... but after 30 seconds or so, it says : ERROR cannot connect to the network. i would like to mention that the phone worked on this carrier.
Have u installed a rom or kernel on it at all?
Sent from my Xperia X10 using XDA
yes i`ve instaled Oddie`s miui rom and darkHD rom but to instal the miui rom i`ve used the locked bootloader way, that means my bootloader is loocked, now i`m on stock, that was put on using SEUS.
this morning i`ve successfully unlocked my bootloader and curently running MOOKE`s rom. but i still can`t connect to a network. sholud i take my phone to a service to do a sim unlock? can it be that the problem?
Take out sim card and insert again.
Do flash kernel and flash rom as follow OP instruction
Done ^_^. HOpe this help u.
Or
Install kernel and flash rom then insert Sim.
Problem solved
did a recovery through seus, then rooted with flashtool, then reinstaled flashtool and drivers, then did an bootloader unlock and voila, got signal and network connection, flashed MOOke`s rom, which has a very good batery life. thanks
good!
Hi Guys!
Does any of you know how to sim unlock the specified phone? (GT-S7275R)
Do i need to root the device? Which is the best rooting program/method?
Or i just need a code to sim unlock the phone?
If someone can help me i would be very happy
Thanks!
Molnardani84 said:
Hi Guys!
Does any of you know how to sim unlock the specified phone? (GT-S7275R)
Do i need to root the device? Which is the best rooting program/method?
Or i just need a code to sim unlock the phone?
If someone can help me i would be very happy
Thanks!
Click to expand...
Click to collapse
Sim unlock usually don't matter which phone its in.
The SIM only is locked.
Try using the wrong password untill it requests for PUK code, then get your PUK code handy.
Usually sim providers can give you your PUK code.
UNLESS YOU STOLE IT
Then you're a nigga**** !
XD
JK
Let me know if it helps.
Tre91 said:
Sim unlock usually don't matter which phone its in.
The SIM only is locked.
Try using the wrong password untill it requests for PUK code, then get your PUK code handy.
Usually sim providers can give you your PUK code.
UNLESS YOU STOLE IT
Then you're a nigga**** !
XD
JK
Let me know if it helps.
Click to expand...
Click to collapse
I want to use my phone with a vodafone SIM, but the phone is locked to T-Mobile.
Of course i know the PUK code I did not stole the phone or the SIM card
With this method I can use the phone with my Vodafone SIM?
The phone is rooted by the way.
When I enter my PIN code for the SIM, the phone asks for the network unlock code. That is my problem. And I can't use it with my Vodafone SIM card
Any solution for this?
Molnardani84 said:
I want to use my phone with a vodafone SIM, but the phone is locked to T-Mobile.
Of course i know the PUK code I did not stole the phone or the SIM card
With this method I can use the phone with my Vodafone SIM?
The phone is rooted by the way.
When I enter my PIN code for the SIM, the phone asks for the network unlock code. That is my problem. And I can't use it with my Vodafone SIM card
Any solution for this?
Click to expand...
Click to collapse
Maybe ?
I can only think of re-formatting the phones firmware.
Know how to use odin and flash a new firmware ?
Tre91 said:
Maybe ?
I can only think of re-formatting the phones firmware.
Know how to use odin and flash a new firmware ?
Click to expand...
Click to collapse
I have odin, but if you can send me instructions how to do what you just wrote that would be very nice of you
Do i have to download n original firmware? And flash via odin? Or how? I am very curious abou it
Thanks
Molnardani84 said:
I have odin, but if you can send me instructions how to do what you just wrote that would be very nice of you
Do i have to download n original firmware? And flash via odin? Or how? I am very curious abou it
Thanks
Click to expand...
Click to collapse
No worries mate.
So first to download is the original firmware.
Go here -> http://www.samsungis.com/Firmwares/GT-S7275R.html
Choose based on country+mobile.
Hover the mouse over the words and it will show the country name if you're unsure.
So for example im in Malaysia and the latest firmware is XME, S7275RXXUANA3.
Once downloaded, the file is a single file. Extact it and you'll get an md5 file.
Use whatever odin version u have. I used odin 3.07
And select 'PDA' only. Then go to the downloaded file.
Proceed with flashing. Click start and wait for the phone to be installed.
Once install, phone should be brand new.
If phone stuck at boot screen, enter recovery and wipe cache and partition.
Let me know how it goes. !
Tre91 said:
No worries mate.
So first to download is the original firmware.
Go here -> http://www.samsungis.com/Firmwares/GT-S7275R.html
Choose based on country+mobile.
Hover the mouse over the words and it will show the country name if you're unsure.
So for example im in Malaysia and the latest firmware is XME, S7275RXXUANA3.
Once downloaded, the file is a single file. Extact it and you'll get an md5 file.
Use whatever odin version u have. I used odin 3.07
And select 'PDA' only. Then go to the downloaded file.
Proceed with flashing. Click start and wait for the phone to be installed.
Once install, phone should be brand new.
If phone stuck at boot screen, enter recovery and wipe cache and partition.
Let me know how it goes. !
Click to expand...
Click to collapse
And if I do this, my phone will be SIM unlocked? How the recovery comes tom my phone? i only just rooted my phone, but on other orum I read that there is no CWM for the phone.
Molnardani84 said:
And if I do this, my phone will be SIM unlocked? How the recovery comes tom my phone? i only just rooted my phone, but on other orum I read that there is no CWM for the phone.
Click to expand...
Click to collapse
I cannot confirm if the phone will be unlocked. But its worth a try.
But many websites charge you to get it unlocked and im not sure if there's a cheaper method.
But i can confirm that there is no CWM recovery for our phone yet.
Its the normal samsung official recovery i was speaking of.
Turn off phone, press 3 buttons at once (On/off button + home button + volume up button) .
Tre91 said:
I cannot confirm if the phone will be unlocked. But its worth a try.
But many websites charge you to get it unlocked and im not sure if there's a cheaper method.
But i can confirm that there is no CWM recovery for our phone yet.
Its the normal samsung official recovery i was speaking of.
Turn off phone, press 3 buttons at once (On/off button + home button + volume up button) .
Click to expand...
Click to collapse
Okay, i will give it a try, but i think it won't work
I'm looking for a cheap method, i like to tinker with my phone
Is there an official Ace 3 forum?
Molnardani84 said:
Okay, i will give it a try, but i think it won't work
I'm looking for a cheap method, i like to tinker with my phone
Is there an official Ace 3 forum?
Click to expand...
Click to collapse
There are plenty of forums but there's no specific Ace 3 forum yet :/
Oh and i think you should really give it a try.
So i can confirm if it really works
Tre91 said:
There are plenty of forums but there's no specific Ace 3 forum yet :/
Oh and i think you should really give it a try.
So i can confirm if it really works
Click to expand...
Click to collapse
I upgraded the firmware, but the only thing that happened is i don't get the T-mobile logo at startup. The phone still locked to t-mobil
Molnardani84 said:
I upgraded the firmware, but the only thing that happened is i don't get the T-mobile logo at startup. The phone still locked to t-mobil
Click to expand...
Click to collapse
Where do you live ?
And what line do you wanna use the phone with ?
Lemme see if i can get that particular firmware.
Tre91 said:
Where do you live ?
And what line do you wanna use the phone with ?
Lemme see if i can get that particular firmware.
Click to expand...
Click to collapse
I live in Hungary, and I want use it with a vodafone Sim card. I upgraded the firmware, but firmware update doesn't remove sim lock.
Molnardani84 said:
I live in Hungary, and I want use it with a vodafone Sim card. I upgraded the firmware, but firmware update doesn't remove sim lock.
Click to expand...
Click to collapse
Did you download the Hungary - S7275RXXUAML1 ?
Not Hungary (Telenor) - S7275RXXUAML1 ..
Tre91 said:
Did you download the Hungary - S7275RXXUAML1 ?
Not Hungary (Telenor) - S7275RXXUAML1 ..
Click to expand...
Click to collapse
Yes, and the phone works, when it boots, i don't get the t-mobile logo any mor fortunately. But the sim is locked
Molnardani84 said:
Yes, and the phone works, when it boots, i don't get the t-mobile logo any mor fortunately. But the sim is locked
Click to expand...
Click to collapse
Awww that sucks.
Well buddy - > http://unlock.canadagsm.ca/samsung/Samsung-Galaxy-Ace-III-network-unlock-code/
Thats what i got after google search.
If this doesnt work, its time to take it to the shop :3
downgrade gt s7275r
I don't really know where to look but im finding it hard to find hard to find firmware for gt s7275r im currently running xxuanb2 rooted - android vers: 4.2.2 with cwm recovery, but I was wondering is there any way possible I could downgrade to 4.2.1??. ive tried looking everywhere but no success and woud really appreciate some help in this matter , and point me the right way on xda so I know where to post for advice as im a noobie on this foruim.
Molnardani84 said:
Does any of you know how to sim unlock the specified phone? (GT-S7275R)
Click to expand...
Click to collapse
Use ChimeraTool. It supports.
Hi - those firmware links are now dead (not the website, but the download links within that). Any alternative locations? Thanks, Geoff
Note: Flashing different firmware will NOT unlock a phone that is locked to a particular service providers sim you will need to get the unlock code from your provider or from one of the online services.
There are several online providers that can unlock GT-S7275 series phones online. The best ones will use a client software package that you download and install on your computer. You then need to pay them for the unlock before you can unlock the phone. Part of the process is changing your phone to Diag mode by setting the USB to DM+MODEM+ADB this is done by dialing *#0808# however on some S7275 Phones like the Telstra Australia GT-S7275Y dialing this code will not access the needed menu however it can still be accessed.
For Telstra Australia GT-S7275Y and similar phones you need to open the stock calculator app and type (+30012012732+ (note that the ( and the + signs must be typed) this will then open the Factory Mode dialler you can then type *#0808# and the menu will appear.
Don't forget to put your phone back to MTP+ADB (the default setting after unlocking).
Weird problem ....phone doesn't recognize sim.
5.1.1 cm12.
Thanks for any suggestion
rockky said:
Weird problem ....phone doesn't recognize sim.
5.1.1 cm12.
Thanks for any suggestion
Click to expand...
Click to collapse
Does it show up on stock? Which rom are you using?
Is it your Sim or do you need your signal? If that you have to enter the apn manually
Did you install/Update to CM 12.1 build?
Do you have baseband unknown under settings>About phone?
If you are new to CM12.1 and have baseband unknown issue. This is a common issue going around for CM based ROMs
you may need to flash stock sony FTF if yours is a non GPE model and then root and flash recovery.
You will get baseband back
sjesudasan said:
Did you install/Update to CM 12.1 build?
Do you have baseband unknown under settings>About phone?
If you are new to CM12.1 and have baseband unknown issue. This is a common issue going around for CM based ROMs
you may need to flash stock sony FTF if yours is a non GPE model and then root and flash recovery.
You will get baseband back
Click to expand...
Click to collapse
Hello to you, I know you posted this a while ago, but I'm having the same problem on a Z ultra bought second hand... I have the error message invalid sim card after inputing the sim code (so the sim card is detected, and is working in another phone) I also have the error unknown baseband as you described. In the same way, when in service menu, if I want to check SIM lock in service info, the app freeze too without displaying anything.
I don't know what the other owner did to the phone though.
any clue for what to do ? I flashed the latest original rom ( 14.4.A.0.108) through flashtool - still sim card invalid -, then tried to flash through cwm another rom, but still the same.
There is also another bug, i don't know whether it's linked or not, but i can't take a picture with the camera app, the app freeze when I click the button !
Any help would be gladly appreciated !
Hi Kwenteen,
Did you get "unknown baseband" after flashing some ROM? If yes, try flashing KitKat ROM first and then see if you get baseband. I'm suspecting the flashing process didn't go well.
This is a known bug with CM12 ROM for ZU go to dial pad and dial *#06# and the Imei will show up if it shows unknown either flash the Modem zip or flash the stock ROM again
sjesudasan said:
Hi Kwenteen,
Did you get "unknown baseband" after flashing some ROM? If yes, try flashing KitKat ROM first and then see if you get baseband. I'm suspecting the flashing process didn't go well.
Click to expand...
Click to collapse
Hello sjesudasan, thanks for your help,
I tried to flash numerous original roms, starting all the way down to 290, which is 4.3, that displayed properly the emei number, but didn't allow me to pass phone calls (sim card detected, ask for pin code, then no service)
And I can't enter any APN.
On top of that, I am now unable to flash anything with xperia flashtool anymore, getting a null error then error flashing. Aborted. when trying to flash any firmware and the device doesn't boot anymore either. I guess the last flash went wrong even if it didn't display any error, but I assumed that as long as I was able to put the phone in flashmode, I would be able to flash anything, and get away from softbrick ?
when trying to fix with Xperia compagnon, I get the error "UEGetPhoneInfoMissingInfo "
Thank you for your suggestion sairaj rane, unfortunately I already tried that, went back to original firmware, I even flashed the modem zip. None of those solution worked for me.
Thank you for your help !
Hello, after 2 weeks of trouble just to get back with a functionning 5.1.1 ROM, I now have an original sony rom fixed by xperia compagnion.
I have the same error, can't get to the network. Phone ask for simcode, I enter it, and then no error, just no connexion to the network.
I have a recognized emei number, but the ICCID says unknown...
Is it normal ?
Thanks for the help anyway !
kwenteen said:
Hello, after 2 weeks of trouble just to get back with a functionning 5.1.1 ROM, I now have an original sony rom fixed by xperia compagnion.
I have the same error, can't get to the network. Phone ask for simcode, I enter it, and then no error, just no connexion to the network.
I have a recognized emei number, but the ICCID says unknown...
Is it normal ?
Thanks for the help anyway !
Click to expand...
Click to collapse
Have you tried the repair function of xperia companion?
itsmeluigi said:
Have you tried the repair function of xperia companion?
Click to expand...
Click to collapse
Unfortunately, yes.
It worked in a way that allowed me to retrieve the phone from a pretty hard brick, in conjunction with the use of the test point method and s1tool …
but even after this awakening from the dead, still no network connection.
Have you checked the six golden Pins inside the Phones SIM Slot? (Hard to see)
Once my phones one was bent. Had to correct them with a fine tool. Sim recognized since then.
kwenteen said:
Unfortunately, yes.
It worked in a way that allowed me to retrieve the phone from a pretty hard brick, in conjunction with the use of the test point method and s1tool …
but even after this awakening from the dead, still no network connection.
Click to expand...
Click to collapse
Thanks itsmeluigi,
I just checked that, dremelled the protective shield to access them, and probed them with a multimeter. No good, everything is fine there !
kwenteen said:
Thanks itsmeluigi,
I just checked that, dremelled the protective shield to access them, and probed them with a multimeter. No good, everything is fine there !
Click to expand...
Click to collapse
Tried to flash with another cable on another Pc with another Firmware download (Source)?
itsmeluigi said:
Tried to flash with another cable on another Pc with another Firmware download (Source)?
Click to expand...
Click to collapse
Yep, done that too...
To be honest, I really don't know what to do.
I don't know if that can be linked, but the phone is also unable to be unlocked, despite the code provided by sony, matching the imei number !