Installing 7.10.8112.7 on my Lumia 800 through Zune right now.
Unbranded Lumia 800, RM-801.
--- Edit: Also 8773.98!
OS 7.10.8112.7? Very old for me
In Italy is available Version 7.10.8773.98:
Tango windows phone starts being released!
First is 8112 and then 8773
Osso17 said:
OS 7.10.8112.7? Very old for me
In Italy is available Version 7.10.8773.98:
Tango windows phone starts being released!
First is 8112 and then 8773
Click to expand...
Click to collapse
You're right, I'm now installing 8773
Unlocked RM-801 in USA, no update.
Unlocked German Lumia 800 - Zune reports no update though http://www.nokia.com/global/support/software-update/lumia/europe/availability/ states that it should be available...
Nokia report Update available for Italy:
Nokia Software Update
EDIT: Only No-Brand
Nothing yet for me, unlocked lumia 800, France
Installing 7.10.8773.98 right now, Unbranded Lumia 800 (RM-801) , Denmark
The Update for Italy No-Brand are 3:
Build 8112
Build 8773
New Firmware Nokia with Internet Sharing and more
Hades32 said:
Unlocked German Lumia 800 - Zune reports no update though http://www.nokia.com/global/support/software-update/lumia/europe/availability/ states that it should be available...
Click to expand...
Click to collapse
I'm installing it right now... You might wanna recheck
ChrisKringel said:
I'm installing it right now... You might wanna recheck
Click to expand...
Click to collapse
Ive looked on nokias site and it says my update for the 710 is availible but zune says NO .
Nothing yet on my stock Lumia 800 here in the UK. Will give it a few hours and try again. Usually takes a while for updates to fully roll out so I'm sure it'll come soon enough.
To confirm, my product code is 059L7C2 and Nokia say my update is available, so time to just play the waiting game now.
Try this is Zune says your phone is up to date.
turn the phone into airplane mode.
check in zune for an update if it says its upto date click ok, the press one above or below the update option.
next click update and around 2-3seconds disconect from your internet conection, hopefully it will say update available, reconect click ok, and sit back
Ive just done this for my 710 and its updating now.
BigD18t said:
Try this is Zune says your phone is up to date.
turn the phone into airplane mode.
check in zune for an update if it says its upto date click ok, the press one above or below the update option.
next click update and around 2-3seconds disconect from your internet conection, hopefully it will say update available, reconect click ok, and sit back
Ive just done this for my 710 and its updating now.
Click to expand...
Click to collapse
What country are you in ?
BigD18t said:
Try this is Zune says your phone is up to date.
turn the phone into airplane mode.
check in zune for an update if it says its upto date click ok, the press one above or below the update option.
next click update and around 2-3seconds disconect from your internet conection, hopefully it will say update available, reconect click ok, and sit back
Ive just done this for my 710 and its updating now.
Click to expand...
Click to collapse
Ah yes, forgot about the old NoDo trick. Updating right now to 7.10.8112.7.
Someone please capture the URL for the NOKIA update after the 8773 update! I forgot to do it and many people need it!
Use fiddler.
*Detection* said:
What country are you in ?
Click to expand...
Click to collapse
england mate.
it downloaded 8112, which i think is the current version before tango, someone else tried the method, again after the update and it found the latest.
Edit, im now downloading 8773 via Zune using the same method.
microhaxo said:
Someone please capture the URL for the NOKIA update after the 8773 update! I forgot to do it and many people need it!
Use fiddler.
Click to expand...
Click to collapse
we need the firmware cab sender !
the disconnect force update doesnt work for me , when i disconnect it says it can t connect to the updateservice
BigD18t said:
it downloaded 8112, which i think is the current version before tango, someone else tried the method, again after the update and it found the latest.
Edit, im now downloading 8773 via Zune using the same method.
Click to expand...
Click to collapse
Same for me. Had to do the NoDo trick after 8112 to get 8773 to update.
Related
I still have the 11414 firmware and no update so far. Has anyone got the update to 11454 that was mentioned before? I have talked with Nokia today and their helpdesk has told me that a new firmware will be released in 2 weeks time. Might this be the 11454 or is there going to be a newer one?? Any ideas...
If you phone is branded to an operator, that is why...
Operators don't update firmwares often...
Actual firmware is 11451
Bought it SIM free :-(. Oh and i have th eupdate incorrect, should be 11451!
Mines currently a UK Simfree handset (Cyan) which is free from any branding. However, I am still awaiting the update from Nokia as well. Its currently running version 11414
Thant's great Andy, looks like we will just have to wait !!
Seems to be a problem with CYAN version.
I have use the Nokia Care Suite to upgrade, but it does wipe your phone.
However, if you look on the Nokia Data Package Manager 4.2 there is clearly a update for the simfree product code (059M539)
AndyD777 said:
I have use the Nokia Care Suite to upgrade, but it does wipe your phone.
However, if you look on the Nokia Data Package Manager 4.2 there is clearly a update for the simfree product code (059M539)
Click to expand...
Click to collapse
I have been trying to use Nokia data package manager but I always get an error can't download variants can U tell me how to use it. Thx
Sent from my LUMIA 800 using XDA Windows Phone 7 App
what happens exactly? when you get error while pressing download or durring instalation?
djtonka said:
what happens exactly? when you get error while pressing download or durring instalation?
Click to expand...
Click to collapse
When downloading. Basically I can't download anything only navifirm.
Sent from my LUMIA 800 using XDA Windows Phone 7 App
Are you installed latest version? I had some problem with previously one.
zdentist said:
I have been trying to use Nokia data package manager but I always get an error can't download variants can U tell me how to use it. Thx
Sent from my LUMIA 800 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
In Nokia Data Packet Manager.
1. Product Type: rm-801
2. Then click search, this will then pull down a list of Lumia 800 variants or if you know the "Product Code" type this in the box next to "Product Type" and then click search. As a example mine is 059M539.
3. Right click on the selected firmware and click "download selected"
If you are running Win7, this will then create the directory and place all the files in there ready to be used in the Nokia Care Suite.
Thanks
It's coming from Vodafone AU. Hopefully, it fixes the Volume bug too (not listed in their key benefits').
Better battery performance
Camera automatically detects 50/60Hz to remove flicker in stills and videos.
Updated camera settings.
Improved charger detection.
http://blog.vodafone.com.au/blog/nokia-lumia-800-firmware-12070-25042012/
EDIT
It has fixed the volume problem on my device, hard reset not necessary.
Here is the link to the CAB update file (thanks to cYBERdEL). Happy downloading!
http://download.windowsupdate.com/m..._98ed59ede38f0bd78d153d984fcb96e119de2ccd.cab
If you look at the previous update-page (the one for 12070), you'll see that they updated the description, saying that the 12072 includes a fix for the volume bug.
So the 12072 is simply the 12070 with a volume bug fix.
Got It!
Just got 12072 on AU Vodafone on my Lumia 800.
What a long wait! - I am looking forward to my phone not going flat by 4pm.
Also rolling in VODAFONE Spain
Just downloaded it, hope the battery bugs are gone for good!!
The firmware is not yet on Navifirm.
dont download!!
no audio bug fix!! :/
what i noticed till now :
battery :- need to use for a day!
camera : Resolution options - 2mp,3mp,7mp,8 mp!
i think this is new!
video seems better
What is PC ?
Bootloader is updated?
Sent from my Lumia 800 using XDA Windows Phone 7 App
Can't find it
I've tried checking through both Navifirm and Data Packet Manager but can't find this update...
What product code do you have? RM-801? RM-819?
Can someone confirm: Is the Volume Bug fixed or not?
pexer-abc said:
I've tried checking through both Navifirm and Data Packet Manager but can't find this update...
What product code do you have? RM-801? RM-819?
Can someone confirm: Is the Volume Bug fixed or not?
Click to expand...
Click to collapse
It doesn't seem to be in any of the 801 or 819 updates in NaviFirm. It must be only available through Zune. Hopefully, someone will post a link to a cab-updater file...
we are able to change PC on lumia's so knowing PC we can update by Zune
djtonka said:
we are able to change PC on lumia's so knowing PC we can update by Zune
Click to expand...
Click to collapse
I haven't been following the scene for a couple of weeks but last time i checked it wasn't possible to change PC. You could flash a FW from one PC onto the other, but afaik you couldn't change the actual PC...
Any links for instructions to change Product Code out there?
Is possible now using beta NSS
http://forum.windows-phone.pl/threads/3069-Nokia-Zmiana-Product-Code
pexer-abc said:
I've tried checking through both Navifirm and Data Packet Manager but can't find this update...
What product code do you have? RM-801? RM-819?
Can someone confirm: Is the Volume Bug fixed or not?
Click to expand...
Click to collapse
i already mentioned, audio bug not fixed
Could you write down your PC please? Use NCS to reading.
surya467 said:
i already mentioned, audio bug not fixed
Click to expand...
Click to collapse
Yes, you did. But others confirmed it's fixed. So it would be good to get feedback from more sources.
djtonka said:
Is possible now using beta NSS
http://forum.windows-phone.pl/threads/3069-Nokia-Zmiana-Product-Code
Click to expand...
Click to collapse
Ok, it's in polish. But as i understand it can only be done with a interop unlocked device?... mine is flashed with 12070 through ncs so I'm stucked for now intill a 12072 link is available or it's released through dpm
-obiwan- said:
Yes, you did. But others confirmed it's fixed. So it would be good to get feedback from more sources.
Click to expand...
Click to collapse
i guess a hard reset is required!
but y? i mean..an update should patch..y does it still leave the bug...i will try hard reset and let youll knw
Cab link
Would be great if someone could catch the Cab link during the update and share it with the rest of us
Use a sniffer like wireshark and log the HTTP traffic while you update a device though Zune....
Look for something looking like this
"http://download.windowsupdate.com/msdownload/update/software/dflt/2012/03/pr12_oemupdate.cab.pks_0913f9fb9191ad8467f764b204e8448e703535c7.cab"
References:
http://forum.xda-developers.com/showthread.php?t=1306415
http://www.wireshark.org/download.html
pexer-abc said:
Ok, it's in polish. But as i understand it can only be done with a interop unlocked device?... mine is flashed with 12070 through ncs so I'm stucked for now intill a 12072 link is available or it's released through dpm
Click to expand...
Click to collapse
No. Only with Qualcomm bootloader.
I successfully updated my AT&T Titan from 7720 -> 8773 using the cabsender and the update files posted HERE. My Titan does not have HSPL i simply updated to 8773 using the cabsender. Even though Tango doesn't offer much in turns of features I still like to have the latest .
7.10.8112.7
Code:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8107.79-7.10.8112.7-armv7-retail-microsoft-pluspkr.pks_d500a10eeb11fb6c1913adac4759d67185474d3e.cab
7.10.8773.98
Code:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8112.7-7.10.8773.98-armv7-retail-microsoft.pks_113460c78ac6233e3bb776ceddb6ac94e98c4221.cab
Since I have a US AT&T Titan I only needed the English Updates (0409)
8107-8112 English Update
Code:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/03/diff-7.10.8107.79-7.10.8112.7-armv7-retail-microsoft.lang_0409.pks_ae068921fd637ba2e3e268b28e6ca1c9f3a9c11f.cab
8112-8773 English Update
Code:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8112.7-7.10.8773.98-armv7-retail-microsoft.lang_0409.pks_3e940c840ee4815422610bb6da8f28ac327767cc.cab
Yes there are Custom ROMS with tango already, but since I can't flash custom roms atlease I can still have 8773 even it its locked down and branded.
All OS updates are NON-DEVICE-SPECIFIC so you can update to Tango on any device either it be a US Titan/II or an European Titan.
I attached a screenshot of what My cabsender folder looks like. That is the files i used to update from stock U.S 7720 to 8773. If you are already on 8107 just put the files i posted above.
I couldn't do a one shot 7720 => 8773 update. So i just broke it up
7720 -> 8107
8107 -> 8113
8113 -> 8773
Bigger Screen Shot
Updated to 8773 finally and now the burst camera doesn't work.
Phone is ruined basically.
What a horrendous POS this device is.
Arthur Hucksake said:
Updated to 8773 finally and now the burst camera doesn't work.
Phone is ruined basically.
What a horrendous POS this device is.
Click to expand...
Click to collapse
Works for me.
I did flash the stock 7720 ROM to the phone and then updated. I still haven't received the HTC updates to the Camera Modes, Sound Enhancer etc. But then again it takes days for me to get those updates after a fresh install.
Tachi91 said:
Works for me.
I did flash the stock 7720 ROM to the phone and then updated. I still haven't received the HTC updates to the Camera Modes, Sound Enhancer etc. But then again it takes days for me to get those updates after a fresh install.
Click to expand...
Click to collapse
How do I return to 7720 though?
You can't with Cabsender. :-(
The burst modes and everything are selectable, it actually tries to take burst shots but gets stuck.
Arthur Hucksake said:
How do I return to 7720 though?
You can't with Cabsender. :-(
The burst modes and everything are selectable, it actually tries to take burst shots but gets stuck.
Click to expand...
Click to collapse
With the stock ROM (RUU update)
If you have an AT&T Branded Titan then download the "Cingular" IMG if not choose which ever is for your titan (Europe/Asia). Then flash it and your back to 7720 (Cingular).
Just installed 2.05 , and it's put me at 8107.
Hmmm... Wasn't expecting that.
No updates in Zune neither.
Arthur Hucksake said:
Just installed 2.05 , and it's put me at 8107.
Hmmm... Wasn't expecting that.
No updates in Zune neither.
Click to expand...
Click to collapse
you used the Europe 2.05 rom which is 8107. That was the last update released by HTC. And for now HTC hasn't released any updates via Zune. If they releases a Tango update you should receive it when ever that is.
Tachi91 said:
you used the Europe 2.05 rom which is 8107. That was the last update released by HTC. And for now HTC hasn't released any updates via Zune. If they releases a Tango update you should receive it when ever that is.
Click to expand...
Click to collapse
Great, thanks.
This phone doesn't play nice with 8773 unfortunately. Maybe a camera driver issue.
Tachi91 said:
you used the Europe 2.05 rom which is 8107. That was the last update released by HTC. And for now HTC hasn't released any updates via Zune. If they releases a Tango update you should receive it when ever that is.
Click to expand...
Click to collapse
Isn't the current wave of updates a Tango update? :s
If that isn't Tango then what is it?
Nokia, Samsung and Euro HTCs have already have Tango rolled out or is it just another set of HTC updates? (This will make it 3rd since 7720!)
After updated to 8773, have you received any notification for a HTC update?
I also tried the call quality on 8773, it was as ****ty as on 7720.
Tachi91 said:
I successfully updated my AT&T Titan from 7720 -> 8773 using the cabsender and the update files posted HERE. My Titan does not have HSPL i simply updated to 8773 using the cabsender. Even though Tango doesn't offer much in turns of features I still like to have the latest .
7.10.8112.7
Code:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8107.79-7.10.8112.7-armv7-retail-microsoft-pluspkr.pks_d500a10eeb11fb6c1913adac4759d67185474d3e.cab
7.10.8773.98
Code:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8112.7-7.10.8773.98-armv7-retail-microsoft.pks_113460c78ac6233e3bb776ceddb6ac94e98c4221.cab
Since I have a US AT&T Titan I only needed the English Updates (0409)
8107-8112 English Update
Code:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/03/diff-7.10.8107.79-7.10.8112.7-armv7-retail-microsoft.lang_0409.pks_ae068921fd637ba2e3e268b28e6ca1c9f3a9c11f.cab
8112-8773 English Update
Code:
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8112.7-7.10.8773.98-armv7-retail-microsoft.lang_0409.pks_3e940c840ee4815422610bb6da8f28ac327767cc.ca
Yes there are Custom ROMS with tango already, but since I can't flash custom roms atlease I can still have 8773 even it its locked down and branded.
All OS updates are NON-DEVICE-SPECIFIC so you can update to Tango on any device either it be a US Titan/II or an European Titan.
I attached a screenshot of what My cabsender folder looks like. That is the files i used to update from stock U.S 7720 to 8773. If you are already on 8107 just put the files i posted above.
I couldn't do a one shot 7720 => 8773 update. So i just broke it up
7720 -> 8107
8107 -> 8113
8113 -> 8773
Bigger Screen Shot
Click to expand...
Click to collapse
That's an awesome find! Does this update fix the keyboard disappearing?
Sent from my PI39100 using XDA Windows Phone 7 App
Arthur Hucksake said:
Updated to 8773 finally and now the burst camera doesn't work.
Phone is ruined basically.
What a horrendous POS this device is.
Click to expand...
Click to collapse
Go into the HTC Hub and download or update the camera modes
---------- Post added at 10:10 PM ---------- Previous post was at 10:02 PM ----------
GreenGrenadez said:
That's an awesome find! Does this update fix the keyboard disappearing?
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
That got fixed with the 7.10.8107.79 update.
See here:
http://www.microsoft.com/windowsphone/en-us/howto/wp7/basics/update-history.aspx
Does anyone's Titan hang after a hard reset after updating this way to 8773?
As at the end of the initial setup process there is now a new screen saying "HTC will now help you set up network settings"
And until you manually open connection setup none of the buttons respond!
Sent from my HTC One X using xda app-developers app
bhogal said:
Does anyone's Titan hang after a hard reset after updating this way to 8773?
As at the end of the initial setup process there is now a new screen saying "HTC will now help you set up network settings"
And until you manually open connection setup none of the buttons respond!
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
First time I've heard of anything like that. What kind of setup did you have before updating? Was it a stock locked ROM or where you running a custom ROM.
Details Details Details
Tachi91 said:
First time I've heard of anything like that. What kind of setup did you have before updating? Was it a stock locked ROM or where you running a custom ROM.
Details Details Details
Click to expand...
Click to collapse
Yes, it was a stock WWE EU/UK Locked ROM 2.05
I have also noticed that the intial welcome SMS is also delayed until I manually open the Connection Setup App or until I delete that App!
Very very weird as I also updated my Omnia 7 and that is perfect.
Also, I have tried hard resetting a number of times and everytime the same behaviour is exhibited.
Step by step please
I been trying and :crying: all day just can't get to work.
every time run the cap_sender nothing happens.
I have a Titan II on AT&T and version 7.10(8112)
Thanks for any help
NuttyBuddy said:
I been trying and :crying: all day just can't get to work.
every time run the cap_sender nothing happens.
I have a Titan II on AT&T and version 7.10(8112)
Thanks for any help
Click to expand...
Click to collapse
What exactly are you doing?
Frist I run WP7_updat_tool,then I run the Wp7 Update Cab Sender.bat file.
I have the Cab files in the same folder as the WP7 update Cap sender.bat.
I pick the S option when I run it. It say done, But it didn't do any thing.
I am running WIN 8
NuttyBuddy said:
Frist I run WP7_updat_tool,then I run the Wp7 Update Cab Sender.bat file.
I have the Cab files in the same folder as the WP7 update Cap sender.bat.
I pick the S option when I run it. It say done, But it didn't do any thing.
I am running WIN 8
Click to expand...
Click to collapse
It doesn't give you any errors and claims the update was succesful, but yet your T2 stays on 8112?
Oh I get this Error: No update Files.
Thanks for your time with this.
---------- Post added at 05:25 PM ---------- Previous post was at 04:32 PM ----------
My Fail
what I was doing is right clicking on the WP7 Cab Sender.bat file and then I picked run as administrator. that is a no no. This time I picked open and every
thing went a ok.
Thank for your time Tachi91
Just finished updating to WP7.8 through Zune
mdsharpe said:
At least one update is now available through Zune.
Plugged my Lumia 800 in just now, and it's downloading "NOKIA Update for Windows Phone".
This may be a precursor to WP7.8? I will update when I have more information.
Click to expand...
Click to collapse
Got nothing on my Telus 800 EDIT* Got it now
mdsharpe said:
At least one update is now available through Zune.
Plugged my Lumia 800 in just now, and it's downloading "NOKIA Update for Windows Phone".
This may be a precursor to WP7.8? I will update when I have more information.
Edit 1: Now updating to "OS version 7.10.8783.12".
Click to expand...
Click to collapse
You should've captured the links to the cabs.
What is your firmware version after the update?
Skrypek said:
You should've captured the links to the cabs.
What is your firmware version after the update?
Click to expand...
Click to collapse
I've just added the CAB-Links from my (german unbranded) Lumia 800 to the CAB thread in the generic WP7 section.
ChrisKringel said:
I've just added the CAB-Links from my (german unbranded) Lumia 800 to the CAB thread in the generic WP7 section.
Click to expand...
Click to collapse
thanks bro, RM -801??
ChrisKringel said:
I've just added the CAB-Links from my (german unbranded) Lumia 800 to the CAB thread in the generic WP7 section.
Click to expand...
Click to collapse
I updated to 7.8 via NCS a few weeks ago but I've read that the Zune 7.8 update came in several parts.
Do I have to try to get the OEM CAB files onto my phone as well to complete the update?
Was able to get the update on my Telus RM-819 using the disconnect trick :good:
yellowbentines said:
I updated to 7.8 via NCS a few weeks ago but I've read that the Zune 7.8 update came in several parts.
Do I have to try to get the OEM CAB files onto my phone as well to complete the update?
Click to expand...
Click to collapse
If your phone is already on 7.10.8858.136 the cabs won't upgrade anything.
Unless the OEMupdate cab contains a newer firmware than came with your NCS ROM, but then you need to only deploy that single cab.
Hi guys
I have updated mine via cab sender everything works fine except lockscreen+wallpaper which doesn't open for me. Anyone know how to fix this?
Thanks!
RawriClark said:
Hi guys
I have updated mine via cab sender everything works fine except lockscreen+wallpaper which doesn't open for me. Anyone know how to fix this?
Thanks!
Click to expand...
Click to collapse
Did you install with the right language packs?
dont know when it would come to Ireland
I live in Bangladesh and still just updated my Lumia 800 via Zune disconnect tricks. But befor updating to 7.8 , i had to update 2 small update 1st. Now i am going to explore whats new.
the disconnect method worked for me too in Ireland
I can't get the disconnect trick to work
I bought an unlocked Lumia 920 from Singapore (Country Variant, RM-821_apac_singapore_293) to use under T-Mobile NA. While the Nokia website listed the Amber update as available for 920 for weeks now, I am not seeing the update OTA. Does anyone has similar issue? Do I need to use NCS to force an update?
t_huankiat said:
I bought an unlocked Lumia 920 from Singapore (Country Variant, RM-821_apac_singapore_293) to use under T-Mobile NA. While the Nokia website listed the Amber update as available for 920 for weeks now, I am not seeing the update OTA. Does anyone has similar issue? Do I need to use NCS to force an update?
Click to expand...
Click to collapse
Look here for all available Asian Nokia Lumia firwares http://www.nokia.com/global/support...ware-update/wp8-availability-in-asia-pacific/ and use Nokia Software Updater 4.1.0 for updating to the latest firmware from here http://jkorondy.com/Lumia920. Latest firmware is: Lumia 920 Country variant 3047.0000.1326.2028 Available.
gee2012 said:
Look here for all available Asian Nokia Lumia firwares http://www.nokia.com/global/support...ware-update/wp8-availability-in-asia-pacific/ and use Nokia Software Updater 4.1.0 for updating to the latest firmware from here http://jkorondy.com/Lumia920. Latest firmware is: Lumia 920 Country variant 3047.0000.1326.2028 Available.
Click to expand...
Click to collapse
That's the website I was looking from Nokia for availability. It just puzzled me that nothing happen OTA yet. I might give that Nokia software a look. Thanks Gee!
t_huankiat said:
That's the website I was looking from Nokia for availability. It just puzzled me that nothing happen OTA yet. I might give that Nokia software a look. Thanks Gee!
Click to expand...
Click to collapse
It will flash the full new available firmware (not OTA) and will wipe your phone, backup your files first bro. NSU is the safest and easiest way to update, revives dead lumia`s too!
gee2012 said:
It will flash the full new available firmware (not OTA) and will wipe your phone, backup your files first bro. NSU is the safest and easiest way to update, revives dead lumia`s too!
Click to expand...
Click to collapse
If I completely flash it, does it mean the AES I setup for GMail last year will no longer work?
t_huankiat said:
If I completely flash it, does it mean the AES I setup for GMail last year will no longer work?
Click to expand...
Click to collapse
Maybe, but you can try backing-up apps and app settings in settings/back-up/apps in the cloud before the flash.
gee2012 said:
Maybe, but you can try backing-up apps and app settings in settings/back-up/apps in the cloud before the flash.
Click to expand...
Click to collapse
Got it. I will give it a try. Thanks Gee!
Thanks for linking!
Thanks for linking to my site, Gee2012. I try to keep it as up to date as possible. It has served over 20,000 downloads in the past 90 days. That's a lot of Nokia users...
That program works! Thanks! Now I am on the latest GDR3 via the Preview for Developers. The only downside is it wiped out the phone clean and restore all the apps with settings back and also the live tiles arrangement, but this is more an annoyance than a problem.