Related
CLOSED
But it is section about xperia ray, why xperia pro?
Because there is no section for xperia pro.
Sorry for newbie question but what is it for?
Why should I flash this?
Thank you
Ztrindberg said:
Sorry for newbie question but what is it for?
Click to expand...
Click to collapse
CWM (ClockWorkMod) is a recovery. Launched at phone boot Recovery is a tool for backup all system programs and your data. And for restore all data back.
coolkaas said:
CWM (ClockWorkMod) is a recovery. Launched at phone boot Recovery is a tool for backup all system programs and your data. And for restore all data back.
Click to expand...
Click to collapse
Ok thank you.
Now I understand. I was confused when it said kernel.
Sent from my MK16i using Tapatalk
Ztrindberg said:
Ok thank you.
Now I understand. I was confused when it said kernel.
Sent from my MK16i using Tapatalk
Click to expand...
Click to collapse
yes, it is a kernel. with cwm support. linux lernel. (not 'it said', but 'he said'. it -- thing, he -- human))).
overclock is run on this kernel?
Indeed it would be great to know if this kernel supports overclocking!
Hi is this based on stock kernel or CM kernel?
Riyal said:
Hi is this based on stock kernel or CM kernel?
Click to expand...
Click to collapse
It is based on stock kernel.
Everything works exactly as in stock.No bugs.
silencer51 said:
Indeed it would be great to know if this kernel supports overclocking!
Click to expand...
Click to collapse
I am not a big fan of overclocking, so i haven't included any overclocking modules...
Sorry...
i need stock kernel with overclocking
bbooff said:
NEEDS UNLOCKED BOOTLOADER
Flash with fastboot.
INSTRUCTIONS:
Run cmd in the folder that contains fastboot.exe.Unzip boot.zip in the same folder.Connect your MK16i in fastboot mode.
Type:fastboot flash boot boot.img
ENJOY!
To enter recovery, press power on-off key once when the (white) sony ericsson logo gets brighter.
SPECIAL THANKS TO:Jozinec for providing the stock kernels and for the exhausting tests he has conducted.
Dedicated to E
Click to expand...
Click to collapse
1. Are there step by step instructions somewhere?
2. Can I use a2sd with this kernel? Darktremor's.
3. If this kernel doesn't support a2sd, will there be a future one that does? A few weeks/month or 2?
4. If I need the specific firmware, is it in the zip package there? If not where to get it? Is it what typically comes on MK16i?
I damaged my SK17i physically and look to replace with MK16i if I can get mysame basic setup. Root and a2sd basically.
This worked very well on my MK16i with stock .58 ROM, thanks.
A bit curious to use the power button, whilst other recovery images use the volume down button, but I'm all happy.
//
Very glad I've found this, just installed it but having the power button as the trigger is a bit weird and very fiddly to the point where I haven't gotten it to work yet.
Also can I suggest that since the Pro is basically a big boys Neo V that we put all Pro related threads in the Neo V section until they finally decide to give us lot a section.
Sp4rkR4t said:
Very glad I've found this, just installed it but having the power button as the trigger is a bit weird and very fiddly to the point where I haven't gotten it to work yet.
Also can I suggest that since the Pro is basically a big boys Neo V that we put all Pro related threads in the Neo V section until they finally decide to give us lot a section.
Click to expand...
Click to collapse
A bit difficult right now. Xperia Pro threads are distributed between many Xperia 2011 forums. I didn't noticed about this thread until someone referenced it, because I tought the Xperia Pro threads were on the Xperia Arc forum, where team FreeXperia posted the CM Rom for MK16a. I think this is the problem fo not having a device specific forum or sub-forum.
Also, all the MK16 owners, please vote for the MK16 to have it's own forum:
http://forum.xda-developers.com/showthread.php?t=1416406
RumCoffee said:
1. Are there step by step instructions somewhere?
2. Can I use a2sd with this kernel? Darktremor's.
3. If this kernel doesn't support a2sd, will there be a future one that does? A few weeks/month or 2?
4. If I need the specific firmware, is it in the zip package there? If not where to get it? Is it what typically comes on MK16i?
I damaged my SK17i physically and look to replace with MK16i if I can get mysame basic setup. Root and a2sd basically.
Click to expand...
Click to collapse
1. No step by step instructions for now, I think, but it is really easy : "fastboot flash boot boot.img" from a command prompt. You may have fastboot.exe and boot.img in the same folder. You can get fastboot.exe in the tools folder of the android sdk.
2,3. I think apps2sd is a feature introduced in 2.3 gingerbread. You can move applications to your sd card in Settings->Applications->Manage Applications->(Select your app)->Move to SD Card.
4. I think the stock SE ROM meets your requirements, but you can also try the FreeXperia Cyanogenmod based ROM: http://forum.xda-developers.com/showthread.php?t=1315904
It's still on testing, but most features work. HDMI & FM Radio still don't work, and I think there are some problems with Bluetooth.
bbooff said:
I am not a big fan of overclocking, so i haven't included any overclocking modules...
Sorry...
Click to expand...
Click to collapse
bro, i canot boot into recovery mode with the 'power button press during SE gets brighter'...any other tricks? is it a long press or short press? can u make a video for the shortcut process?
thanks
deng..i just found out actually to enter recovery mode is by pressing "Volume down" button when SE wordings tends to go bright, instead of 'Power' button. ("=_=)
(not 'it said', but 'he said'. it -- thing, he -- human))).
Thank you for the ROFL
Continue only if you have read http://forum.xda-developers.com/showthread.php?t=1801191 and confirm that you have:
1)Unlocked Bootloader
2)Rooted phone
3)CWM installed
4)Have a nandroid backup of your current ROM
5)Have a titanium backup
6)Have a backup of your SD card
A HUGE THANKS TO FXP TEAM FOR MAKING A WONDERFUL ROM !!
CHANGELOG
http://code.google.com/p/freexperia/
Step 1: DOWNLOADS
1)the original thread ( http://forum.xda-developers.com/showthread.php?t=1205141 (thanks fxp!!) )
download http://uploaded.net/file/v9l8usb9/from/odeyra OR http://depositfiles.com/files/4g5uaxpoz
put it on sd card in a new folder, say cm9 and remember the location
2)I'll be giving updates when new versions are released , please check for it on weekends(mostly sundays)
please note that i dont own the zip files and that they are created by the fxp team
for changelogs see this - http://code.google.com/p/freexperia/
3)Download gapps (google apps, remember, they're ics), they're the google apps including face unlock
http://goo.im/gapps/gapps-ics-20120429-signed.zip
put it on sd card in cm9 folder
4)check baseband in about phone,if the last 2 digits are 72, skip this step and the next and go to step 3
if they are not 72,download http://uploaded.net/file/zxqy01dj/from/um2ivw or http://fiberupload.com/j6yudfu5e8za/MT11i_4.1.B.0.431_BB72.ftf
Step 2: FLASHING BASEBAND
1)put the downloaded .ftf file in C:\Flashtool\firmwares
2)connect phone in MSC (mass storage mode) mode
3)start flashtool
4)click on lightning icon on top left.
5)flashmode>ok
6)select firmware> MT11i(device)> 4.1.B.0.431(version)>BB72(branding)
7)press ok and follow the onscreen instructions
8)phone will reboot and now you should be on 72 baseband
how to check? > settings>about phone>baseband version> last 2 digits should be 72
You're now on .72 baseband!!
THIS STEP ONWARDS, YOU'LL NOT BE ABLE TO SEE YOUR SONY OFFICIAL ICS ROM SO PLEASE SAVE/BACKUP YOUR IMPORTANT WORK.
MAKE SURE THAT YOU HAVE 130mb ROM AND GAPPS.ZIP ON SD CARD AND CHARGE YOUR BATTERY TILL 50%
Step 3: FLASHING CUSTOM ( CM9 ) KERNEL
What's a kernel? go here http://www.androidcentral.com/android-z-what-kernel
1)open FXP214-UNOFFICIAL-haida.zip (downloded before) using winRAR and extract a file called "boot.img" to a known location on your COMPUTER say folder "kernel" on desktop.
2)Connect phone in MSC (mass storage mode) mode
3)open flashtool and click on lightning icon
4)select FASTBOOT MODE and click on button"reboot to fastboot mode(via adb) (buh bye sony !! )
5)wait till your notification light goes blue
6)select "SELECT KERNEL TO FLASH"
7)locate to the boot.img file
8)click ok and poof!! new kernel is flashed !!
9)Disconnect phone and DONT turn it on
Step 4: INSTALLING CM9 ROM BY FXP
1)Turn on phone and when you see the free_xperia_team logo, repeatedly press the vol down button till you enter cwm
navigation in cwm-
go up-vol up
go down-vol down
select option-home button
previous menu-back button
2)select wipe data/factory reset>yes
3)select wipe cache partition>yes
4)select advanced>wipe dalvik cache>yes
5)go back to main menu and select install zip from sd card>choose zip>navigate to the folder where you put the 130mb zip file(ROM) and gapps zip>select FXP214-UNOFFICIAL-haida.zip>yes
6)wait for it to install
7)once installed, select install zip from sd card>choose zip>navigate to the folder where you put the 130mb zip file(ROM) and gapps zip>select gapps.zip>yes
8)once both are installed, return back to the main menu and select first option - reboot system
9)wait for system to boot, first will take some time say 5 minutes
10):good: WELCOME TO CM9 :good:
11)set up the phone and install titanium backup and restore your apps!!
12)enjoy the power of cm9!!
Step 5: NANDROID BACKUP
once you've settled with cm9(restored your apps with titanium) and everything seems normal,
1)go to cwm
2)select backup and restore>backup
3)your phone will be backed up within 20 minutes or less
4)once finished, reboot phone
your backup will be stored in "SD card/clockworkmod/backup/<date_and_time_of backup>"
please rename it for convenience say "fxp 214 cm9 (new)"
HOW TO RESTORE?
1)enter cwm
2)select backup and restore>restore>select folder name( eg: fxp 214 cm9 (new) )
3)this will usually take less time than backup
4)reboot phone to the same state at which it was backed up
THIS DOES NOT CHANGE THE KERNEL
to change kernels, you need to do it via flashtool or fastboot mode
fastboot mode?
while phone is in power off state, open USB cover , connect USB to pc but not to phone , press and hold menu button , connect USB to phone and the notification light should go blue , you can now leave the menu button you are now in fastboot mode.
to change kernel while in fastboot mode, open flashtool, click lightning icon>fastboot mode>ok>select kernel to flash>ok>bazinga!!!
UPGRADING?
Are you on a fxp ROM and wanna upgrade to a higher version?
no worries bro!
1)Download the ROM
2)Put it on your SD card
3)For safety just backup your current ROM if anything goes wrong !!
4)Flash the kernel that is in the zip file. For instructions, refer ^ step 3
5)Enter recovery the way you normally do it(down button.)
6)Wipe cache partition and wipe dalvik cache ONLY!!
7)Install zip from SD card
8)Wait.......
9)When done, go to advanced, wipe battery stats for calibrating battery, reboot system
10)Wait....
Yippeeee... ROM upgraded, data safe and same, like a boss B)
GREAT THANKS TO FXP TEAM :highfive:
WANNA TRY MORE ROMS? http://forum.xda-developers.com/showthread.php?t=1313445
IF I HAVE DONE A MISTAKE, PLEASE CORRECT ME BY REPLYING
IF YOU SCREW UP YOUR PHONE, AND ARE TOTALLY HOPELESS, GET THIS
http://www.sonymobile.com/gb/tools/update-service/
OR
just leave a reply
IF I HAVE HELPED YOU ANY WAY, PLEASE DONT HESITATE TO CLICK THE THANKS BUTTON
First of all the title should be changed from ROM to GUIDE
and it should be in general section, not in dev section
Sent from my Xperia neo V
Mate...there are enough tutorials here...and now that neoV too is officially supported by cm...the hassle of editing scripts and applying patches has also gone...and fxp themselves have given enough instructions to flash cm9...and as far as rooting and unlocking is concerned...there are guides for them too.
I wont downshow ur effort...nor will dishearten you...thanks for the effort bro...but actually it is not needed.
Sent from my Xperia Neo V
Thanks for the guide, but what is MTP mode?
Haluki_BR said:
Thanks for the guide, but what is MTP mode?
Click to expand...
Click to collapse
okay now if you're on stock rom (official sony ics), you'll find usb settings and then connect your phone, there'll be 2 modes, MTP is the one in which you can view your sd card on pc named as removable disk
geekynoob said:
Edit-Just saw ur an Indian... i feel lyk banging my head on the wall...
God save me plsss...
Cheers.!
Click to expand...
Click to collapse
the_neo_v_guy said:
why?
Click to expand...
Click to collapse
@the_neo_v_guy - Bro don't bother bout that geeky noob he has an ol habit of digging into useless things !! You are doing a great job ... I appreciate your efforts bro
livesourav said:
@the_neo_v_guy - Bro don't bother bout that geeky noob he has an ol habit of digging into useless things !! You are doing a great job ... I appreciate your efforts bro
Click to expand...
Click to collapse
thanks a lot livesourav
at least some people know how to appreciate
thanks for this guide buddy, it did help me installing cm9!
iamdchosen1 said:
thanks for this guide buddy, it did help me installing cm9!
Click to expand...
Click to collapse
my pleasure
calm down people, I have cleaned a bit and moved this thread to general section
Yes, it IS NECESSARY!
unisol107 said:
Mate...there are enough tutorials here...and now that neoV too is officially supported by cm...the hassle of editing scripts and applying patches has also gone...and fxp themselves have given enough instructions to flash cm9...and as far as rooting and unlocking is concerned...there are guides for them too.
I wont downshow ur effort...nor will dishearten you...thanks for the effort bro...but actually it is not needed.
Click to expand...
Click to collapse
To unisol107 and Aarush: Sorry to disagree with you, but this kind of tutorial is indeed necessary for noobs like me. It's hard to do all these procedures in the correct way and in the correct order by reading dozens of different threads and sites; it is hard to find out what kernel is compatible with this or that rom, what rom is bug-free, what kernel is bug-free, and many, many other important things like that. And many other tutorials are filled with a plethora of abbreviations that are way beyond my knowledge - only to list few obstacles!
The forum's moderators should, indeed, give congratulations to the_neo_v_guy for his effort, and even help him to improve some litle things to make this tutorial even better than it already is! (Some sort of a better text formating and layout fine-tunning would be nice, if possible).
Stick this toppic, by the way! And help the author to mantain it up to date!
(And sorry for my bad English)
(To the_neo_v_guy: Congratulations, man! Keep going on your good work of helping completely noob people like me!
nice job!!! very helpful for noobs!! keep it up!
Some
I have some more questions...
My Xperia Neo V is a MT11i one (originally bought as a MT11a, but I change it to prevent some game incompatibility issues). These are its configurations:
- Stock ICS v 4.0.4 (version 4.1.B.0.431);
- Baseband with 72 in its last two digits;
- Kernel 2.6.32.9-perf [email protected]#9 (for 1.4 ghz overclock capabilities).
I am thinking about installing CianogenMod, but as I said before, I am a noob, and I don't have enough time (nor ninja discipline...) to read all 220 pages of this toppic: http://forum.xda-developers.com/showthread.php?t=1445844&page=220
So, I need help to find answers to these questions:
1 - Does FXP kernells allow overclock?
2 - Do I need to use only FXP kernells under CianogemMod roms, or can I use other Kernels?
3 - Are FXP132 versions of CM10 completely bug-free and fully operational in Xperia Neo V?
4 - If not, what is the newest version of Cianogen rom that is bug-free and fully operational for my Xperia Neo V, and what kernell can I use with it for best performance/overclock and/or battery-friendly use?
Thanks in advance, and sorry for my bad English.
piduca2011 said:
I have some more questions...
My Xperia Neo V is a MT11i one (originally bought as a MT11a, but I change it to prevent some game incompatibility issues). These are its configurations:
- Stock ICS v 4.0.4 (version 4.1.B.0.431);
- Baseband with 72 in its last two digits;
- Kernel 2.6.32.9-perf [email protected]#9 (for 1.4 ghz overclock capabilities).
I am thinking about installing CianogenMod, but as I said before, I am a noob, and I don't have enough time (nor ninja discipline...) to read all 220 pages of this toppic: http://forum.xda-developers.com/showthread.php?t=1445844&page=220
So, I need help to find answers to these questions:
1 - Does FXP kernells allow overclock?
2 - Do I need to use only FXP kernells under CianogemMod roms, or can I use other Kernels?
3 - Are FXP132 versions of CM10 completely bug-free and fully operational in Xperia Neo V?
4 - If not, what is the newest version of Cianogen rom that is bug-free and fully operational for my Xperia Neo V, and what kernell can I use with it for best performance/overclock and/or battery-friendly use?
Thanks in advance, and sorry for my bad English.
Click to expand...
Click to collapse
1 ..yes they do..
2.. fxp or cm9 kernels only..
3.. no..not at all completely bug free!
4. CM7 is the stable release so far.. use kernel here http://forum.xda-developers.com/showthread.php?t=1566871
TheDarkDefender said:
4. CM7 is the stable release so far.. use kernel here http://forum.xda-developers.com/showthread.php?t=1566871
Click to expand...
Click to collapse
CM7 Is on gingerbread and yea its stable and that kernel works only for cm7 not for cm9 :good:
cm9 is currently on RC2(release candidate) and i didnt find any bugs out there
the_neo_v_guy said:
CM7 Is on gingerbread and yea its stable and that kernel works only for cm7 not for cm9 :good:
cm9 is currently on RC2(release candidate) and i didnt find any bugs out there
Click to expand...
Click to collapse
dude! that kernel works for cm9 as well.. IM USING IT!! what kernel are u using for cm9?
TheDarkDefender said:
dude! that kernel works for cm9 as well.. IM USING IT!! what kernel are u using for cm9?
Click to expand...
Click to collapse
i think there may be a problem with my device, im using the kernel which came in the zip file
the_neo_v_guy said:
i think there may be a problem with my device, im using the kernel which came in the zip file
Click to expand...
Click to collapse
Ok .. i tried that too .. both worked fine!
Sent from my Neo V
TheDarkDefender said:
Ok .. i tried that too .. both worked fine!
Sent from my Neo V
Click to expand...
Click to collapse
:good:
Thanks for the detail info.
Thanx for the guide. Much Appreciated:good:
hi all, i have a problem i try to insatll FXP134 - CM10 on my xperia neo , but all the time when flashing the rom, i've got Error Status 7 on the recovery , i think the problem is that i must install the last version of the recovery the 6.X.X.. i think.. , but my problem is that i I don't know where can i found this CWM recovery version and how to install it ,
maybe the problem is other thing?, is not about CWM? why error status 7??
thank you so much and sorry my english!!!
Use search in Development Thread:
http://forum.xda-developers.com/showpost.php?p=29634447&postcount=81
Elessar76 said:
Use search in Development Thread:
http://forum.xda-developers.com/showpost.php?p=29634447&postcount=81
Click to expand...
Click to collapse
sorry I read all the post but did not see that sorry for the inconvenience
orti13 said:
hi all, i have a problem i try to insatll FXP134 - CM10 on my xperia neo , but all the time when flashing the rom, i've got Error Status 7 on the recovery , i think the problem is that i must install the last version of the recovery the 6.X.X.. i think.. , but my problem is that i I don't know where can i found this CWM recovery version and how to install it ,
maybe the problem is other thing?, is not about CWM? why error status 7??
thank you so much and sorry my english!!!
Click to expand...
Click to collapse
First the cwm recovery will be in the boot.IMG inside the update package.
So just flash the kernel using fastboot to flash the recovery....
Secondly don't wipe the system before installing the cm10 Rom...
The Rom itself will do it for u....
Third if u have wiped the system just open the cm10.zip and erase the first 3 lines from the updater script found in the meta-inf....
is possible to add the FM Radio in the rom [ROM 4.1.2] JellyBam - 20121030 [AOKP + CM10 + PARANOID] [3 ROM in 1] [SPACEDROID]
thank you very much
Yes, use Spirit FM.
I apologize
but can you explain how to do this
where can i download the app
or how to make the installation of the spirit fm
thank you
Long awaited answer...
Hitxman said:
I apologize
but can you explain how to do this
where can i download the app
or how to make the installation of the spirit fm
thank you
Click to expand...
Click to collapse
Well, first thing to do is to make an account over at google.com.
next, when all is done with creation of your account, you go over at the nearest playstore ( http://play.google.com/store ) and you click on the search button wich should look much like an magnifying glass and you should enter these as your keywords:
"Spirit FM" (without quotes) and as a search result you will be offered with the much wanted app... You should then click on it and when it opens, you click on install and, voila! You've got it!
Sorry for the sarcasm but I had to do it..
No hard feelings! The instructions are quite explanatory so you should use them!
Have fun listening!
Hitxman said:
is possible to add the FM Radio in the rom [ROM 4.1.2] JellyBam - 20121030 [AOKP + CM10 + PARANOID] [3 ROM in 1] [SPACEDROID]
thank you very much
Click to expand...
Click to collapse
Just update to the latest version 20121101, the change logs claim to have FM Radio now :good:
WiFi Problem!!
When I try to switch wifi on, It is stuck on Turning on wifi..
Please help ASAP.!!!!
kewlkeval said:
When I try to switch wifi on, It is stuck on Turning on wifi..
Please help ASAP.!!!!
Click to expand...
Click to collapse
Reboot and it should be fine
Sent from my potato.
if none of the top comments work.
try downloading a flashable zip and use clockworkmod to flash it, or try to get the apk of it.
07112012 - Jellybam
Hi guys, newbie in the house.
Well basically im new to the custom rom world,well i just flashed jellybam 30102012 last week and saw the new update.
Then i flashed the new one(07112012),i cant boot. Stuck in the boot logo stage.
Help me out?
emzeeraj said:
Hi guys, newbie in the house.
Well basically im new to the custom rom world,well i just flashed jellybam 30102012 last week and saw the new update.
Then i flashed the new one(07112012),i cant boot. Stuck in the boot logo stage.
Help me out?
Click to expand...
Click to collapse
wipe data/factory reset through cwm
Hi,
I would like to prompt that starting from 11.18 update there is no longer way to choose profiles in power off menu when lockscreen is active.
I've no sufficient messages to post in JellyBAM official topic. I hope iGio reads here too.
Battery Drain
I have recently installed the Jellybam Rom on my Galaxy S2, everything is working fine but the battery is draining out almost at the rate of 1% per minute. in nearly 2 1/2 - 3 hours the phone is dead. Please help.
Thanks
:crying::crying::crying::crying::crying::crying::crying:
raasesh said:
I have recently installed the Jellybam Rom on my Galaxy S2, everything is working fine but the battery is draining out almost at the rate of 1% per minute. in nearly 2 1/2 - 3 hours the phone is dead. Please help.
Thanks
:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
whats your kernel?
Terens said:
whats your kernel?
Click to expand...
Click to collapse
My Kernel is 3.0.15-CM-g39df795
installing ip
Hi, guys
I'd like to try the new JellyBAM rom, so find the file put on the internal storage, boot in clockworkmode, and started. everything went well , arrived to the finish. the phone not started up, tried again, but the same situation.and over this I just can start the download mode.
I was on stock rom with clock work mode kernel. Maybe I did soemthing wrong , but what ???
Hopefully I can put back a stock rom with ODIN... after I would like to try again this ROM. Any ideea sugestion how to do it?!
cszabo said:
Hi, guys
I'd like to try the new JellyBAM rom, so find the file put on the internal storage, boot in clockworkmode, and started. everything went well , arrived to the finish. the phone not started up, tried again, but the same situation.and over this I just can start the download mode.
I was on stock rom with clock work mode kernel. Maybe I did soemthing wrong , but what ???
Hopefully I can put back a stock rom with ODIN... after I would like to try again this ROM. Any ideea sugestion how to do it?!
Click to expand...
Click to collapse
after installing jelly bam and if goes into bootloop, just pull the battery and insert. the rom then should complete installing. If you read the jellybam thread about 30 pages back, this method was mentioned.
stucked again
Cosmic Blue said:
after installing jelly bam and if goes into bootloop, just pull the battery and insert. the rom then should complete installing. If you read the jellybam thread about 30 pages back, this method was mentioned.
Click to expand...
Click to collapse
thx for yor reply, I read lots of pages, not all,but I think is too late now. So I coud manage to go back to my stock rom, the phone working OK.
I stucked again Now I need to root my phone , I did it a couple of monts ago, and was no problem ,but now that metod not work anymore...
I dont understand why...
cszabo said:
thx for yor reply, I read lots of pages, not all,but I think is too late now. So I coud manage to go back to my stock rom, the phone working OK.
I stucked again Now I need to root my phone , I did it a couple of monts ago, and was no problem ,but now that metod not work anymore...
I dont understand why...
Click to expand...
Click to collapse
just flash siyah 4.1.5 kernal and your phone will be rooted as siyah roots the phone.
Cosmic Blue said:
just flash siyah 4.1.5 kernal and your phone will be rooted as siyah roots the phone.
Click to expand...
Click to collapse
Now looks more better , I already have instlaled jellybam... will see how its working:fingers-crossed:. thank you for your help
Battery Drain
Does anybody suffer from more than average battery drain on JellyBam? It seems to lose battery way faster than ResurrectionRemix. (I have latest versions of both roms + Doriman 7.27) And btw JellyBam also hangs a lot with Doriman 7.28.
Primary Rom: ResurrectionRemix 3.1.2
Secondary Rom: JellyBam 1.2.0
Kernel: Dorimanx 7.xx
Guys i Have xperia sola with Stock ICs Indian B.10 not the latest 54
so which the best CM for me And what Gapps for it to flash with it and how to install it anyway
i have unofficial jelly bean from minjuin so if there is the best cm for jelly bean tell me to install it and i will
just give me all i need to install it and instruction please ? and thanks
SpeeDdead said:
Guys i Have xperia sola with Stock ICs Indian B.10 not the latest 54
so which the best CM for me And what Gapps for it to flash with it and how to install it anyway
i have unofficial jelly bean from minjuin so if there is the best cm for jelly bean tell me to install it and i will
just give me all i need to install it and instruction please ? and thanks
Click to expand...
Click to collapse
For now I suggest you to install cm9 because is almost full working. I don't personally recommend you cm10 as it's in a development phase and presents issues.
To install cm9, :
1)copy the latest fxp tom on your phone
2)extract from the fxp file you downloaded the boot.img and flash it via flashtool
3) enter recovery wipe cache,dalvik cache and do a factory reset.
4) install cm9 and after that install immediately gapps. Google for gapps and make sure that you install the one for ics.
5) reboot and enjoy!
If you want to install the cm10 just do the same procedure with cm10 fxp latest files and install gapps for jb.
DaRk-L0rD said:
For now I suggest you to install cm9 because is almost full working. I don't personally recommend you cm10 as it's in a development phase and presents issues.
To install cm9, :
1)copy the latest fxp tom on your phone
2)extract from the fxp file you downloaded the boot.img and flash it via flashtool
3) enter recovery wipe cache,dalvik cache and do a factory reset.
4) install cm9 and after that install immediately gapps. Google for gapps and make sure that you install the one for ics.
5) reboot and enjoy!
If you want to install the cm10 just do the same procedure with cm10 fxp latest files and install gapps for jb.
Click to expand...
Click to collapse
thanks alot for trying to help me , i did exactly what u said the problem was Gapps installed but when trying to open play store or other gapps , its force close , i am sure thats was gapps for ics and its the latest one too , tried another clean install and this time it's not booting so , i removed and got back to stock again and downloaded this one , http://forum.xda-developers.com/showthread.php?t=2233536 i installed it and it works like charm ^_^ and i did a battery calibration this way , full charge and hit calibrate , then full discharging to shut down then full charge again ^_^ just tell me is it good rom ? or there is a bugs i don't see ? cause i didn't tried the 3g yet and somethings but i tried everything else and all works great , srry if being annoying i am just noob
No need to ask sorry mate. The only bug as far as I know is the fm radio. I used this Rom some time before and I can tell you that cm is a great Rom!
DaRk-L0rD said:
No need to ask sorry mate. The only bug as far as I know is the fm radio. I used this Rom some time before and I can tell you that cm is a great Rom!
Click to expand...
Click to collapse
U R The best , Thanks alot , and about the radio i got 1 channel to work Wifi Sure , thanks again for helping me
plz help how to set cyanogenmod
hey plz help me how to set cyanogenmod m nt getting anything..what is gapps n all..i have xperia sola ics rooted n bootloader unlocked..plzzzzzzz help..
manishpaspohe said:
hey plz help me how to set cyanogenmod m nt getting anything..what is gapps n all..i have xperia sola ics rooted n bootloader unlocked..plzzzzzzz help..
Click to expand...
Click to collapse
Gapps are Google apps. Playstore, gmail etc.
Just follow the steps already mentioned before and you will be able to install cyanogenmod mate.
DaRk-L0rD said:
Gapps are Google apps. Playstore, gmail etc.
Just follow the steps already mentioned before and you will be able to install cyanogenmod mate.
Click to expand...
Click to collapse
i downloaded fxp..but when i copy boot.img file it says file is corrupt..error code 0x80004005..plz help..
manishpaspohe said:
i downloaded fxp..but when i copy boot.img file it says file is corrupt..error code 0x80004005..plz help..
Click to expand...
Click to collapse
File is corrupted. Download it again mate.
DaRk-L0rD said:
File is corrupted. Download it again mate.
Click to expand...
Click to collapse
n hw to flash boot.img..??please brief me..
manishpaspohe said:
n hw to flash boot.img..??please brief me..
Click to expand...
Click to collapse
First of all remember that the codename for Sony Xperia Sola is Pepper. Don't install any other's devices firmware because you will have serious troubles.
So go here: http://dfiles.eu/folders/H4B5M4XR0
Download the file named FXP216-cm-9-20130419-UNOFFICIAL-pepper.zip
Transfer the file you downloaded on you phone.
From the file you downloaded extract the boot.img file and place it on your desktop.
Open flashtool. Click fastboot mode and flash the boot.img.
Once done flashing the file, turn on your device and press continuously volume down button. You will enter in cmw.
Wipe cache, do a factory reset and from advanced menu wipe dalvik cache.
After that, go to install zip from sdcard.
Find the file you previously transferred on you phone and install it.
Reboot and you are done.
For any issues let me know.
manishpaspohe said:
n hw to flash boot.img..??please brief me..
Click to expand...
Click to collapse
okayy i got hw to flash boot.img..bt problem is dat my phone is nt getting in cwm..i got links of cwm kernels bt dey r nt working..please provide me link..plz it will be gr8 help
manishpaspohe said:
okayy i got hw to flash boot.img..bt problem is dat my phone is nt getting in cwm..i got links of cwm kernels bt dey r nt working..please provide me link..plz it will be gr8 help
Click to expand...
Click to collapse
Pretty strange they don't work mate. Did you do exactly how I told you? Did you try also with volume up?
DaRk-L0rD said:
Pretty strange they don't work mate. Did you do exactly how I told you? Did you try also with volume up?
Click to expand...
Click to collapse
thank u veryyyy muchhhh
manishpaspohe said:
thank u veryyyy muchhhh
Click to expand...
Click to collapse
Worked?
ok guys, i need some tips..my xperia sola stuck at cyanogenmod logo???? what I'm missing here???
Wipe dalvik, wope cache, wipe data. After this it should boot. Did you got any error during flashin?
Sent from my MT27i using xda app-developers app
SpeeDdead said:
Guys i Have xperia sola with Stock ICs Indian B.10 not the latest 54
so which the best CM for me And what Gapps for it to flash with it and how to install it anyway
i have unofficial jelly bean from minjuin so if there is the best cm for jelly bean tell me to install it and i will
just give me all i need to install it and instruction please ? and thanks
Click to expand...
Click to collapse
fxp216 PEPPER ... dont download anything else you're gonna have a big problem
iLouKaXzZ said:
fxp216 PEPPER ... dont download anything else you're gonna have a big problem
Click to expand...
Click to collapse
Thank you mate, I will try your suggestion because I'm new with CM custom rom.
Hello!
I've got Sola with Unofficial JB stock rom by @munjeni (his kernel too, ofcourse). And I've got couple of questions:
1. Does 4.2.2 Jelly Bean Cyanogenmod 10.1 for Xperia Sola MT27i works with Munjeni's kernel or should I flash the one inside CM build? Apparently there some bugs there , like wifi and bluetooth.
2. Can I install CM 9 on my current kernel?
3. What's the best option here , CM9 (stable) or CM10.1?
Thanks in advance for answers, I realize these are noob questions, but I'm just netering the world of flashing :/