[Q] digitizer question - Thunderbolt Q&A, Help & Troubleshooting

I cracked the digitizer on my phone, and I'm not quite sure what to do. I've replaced a digitizer before, but the screen was far less responsive, borderline unusable. I could get a new LCD panel, but for that price I might as well buy a new phone off of eBay(gnex around $325, rezound around $375). Opinions?

You can get the LCD and Digitizer for $50 shipped off of eBay... it's up to you whether or not that's worth it.

Slack3r said:
You can get the LCD and Digitizer for $50 shipped off of eBay... it's up to you whether or not that's worth it.
Click to expand...
Click to collapse
Really? When I replaced it before, LCD panels were around $150-200 (seven or eight months ago). I'm just afraid of it ending up unresponsive again.

Obaterista93 said:
Really? When I replaced it before, LCD panels were around $150-200 (seven or eight months ago). I'm just afraid of it ending up unresponsive again.
Click to expand...
Click to collapse
I found this, it should be absurdly simple to replace. Not making fun of you or anything but you don't even have to glue it together
http://www.ebay.com/itm/OEM-HTC-THU...287?pt=LH_DefaultDomain_0&hash=item20c778d4ef
I ordered one just for the eventuality that I want to replace my screen. Right now it has a splotch under it (my dumb ass spilled rubbing alcohol on it) but I've been living with it.

You sir, are a lifesaver. $50 LCD panel I can afford. Thank you greatly.

Obaterista93 said:
You sir, are a lifesaver. $50 LCD panel I can afford. Thank you greatly.
Click to expand...
Click to collapse
No problem, hopefully you'll be able to enjoy your Thunderbolt for at least a little while longer

If you just need the digitizer, check this one: http://www.amazon.com/HTC-Verizon-T...sr=8-6&keywords=thunderbolt+lcd+and+digitizer $14.99. That's the same one I bought over a year ago, when I first bought my Bolt from a coworker after he dropped it and cracked the digitizer glass. Worked like a champ, no issues whatsoever.

Related

Replacment Digitizer Quality

Dropped my Atrix before i got me a casing for it.
I want to know how is the quality of the replacements glass wise is it still gorilla glass or?
I got my screen replaced at youbreak Ifix. The screen is identical, just be careful that it gets seated well or you will get a lot of dust under the screen..drives me crazy!
Sent from my MB860 using Tapatalk
If you haven't already bought one take a look at this at ebay,
http://www.ebay.com/itm/OEM-Motorol...052?pt=LH_DefaultDomain_0&hash=item3cc340bee4 .
It is the digitizer and frame assembly. I just bought one of these for mine and I gotta say that I could not be any happier. For one it is OEM. Another I didn't have to seperate the frame from the glass or mess with glue tape. It is a b!tch connecting the ribbon cable back to the mainboard. But other than that it is an easy repair.
Oh, it looks absolutely brand spankin' new.
i replaced my digitizer with a part i got from amazon, big mistake, it was so much worse, looked identical but was just aweful, luckily moto replaced it for free as now i didnt have a broken screen it was still under warranty! good as new now.
edit: also looking at that post above, if you are going to do it yourself having it come with the frame would be great as mine didnt, so i had to use a hairdrier to heat up the glue holding the digitizer to the frame, real PITA
Yeah you're right ears1991, it was nice and easy not having to worry with separating the glass from the frame and then reattaching the new one. My phone looks better than ever. On the very first day that I ever owned it I handed it to my 24 year old son and he immediately dropped it. It put a nice gouge it the glass so until now I have never really had an Atrix that looked new.
JdgM3NT4L said:
If you haven't already bought one take a look at this at ebay,
http://www.ebay.com/itm/OEM-Motorol...052?pt=LH_DefaultDomain_0&hash=item3cc340bee4 .
It is the digitizer and frame assembly. I just bought one of these for mine and I gotta say that I could not be any happier. For one it is OEM. Another I didn't have to seperate the frame from the glass or mess with glue tape. It is a b!tch connecting the ribbon cable back to the mainboard. But other than that it is an easy repair.
Oh, it looks absolutely brand spankin' new.
Click to expand...
Click to collapse
do you have instructions on how you fixed it or a youtube video, and also what tools did you need to fix it? my digitizer has been acting crazy and I need to replace it.
yea youtube video called
replacing atrix digitizer
from Repair universe
problem is thwy only show how to *completly disasemble it
they dont show how to put it back together
ltdanno360 said:
yea youtube video called
replacing atrix digitizer
from Repair universe
problem is thwy only show how to *completly disasemble it
they dont show how to put it back together
Click to expand...
Click to collapse
DONT USE REPAIR UNIVERSE! Horrible customer service, no phone support, slow ass shipping even tho I paid extra for next day (got it in same time as regular shipping) and gave me the run around when they sent me a defective digitizer first time. Took me nearly a month from order to get what i paid for and only after I threatened to notify BBB of their horrible service.
pre4speed said:
DONT USE REPAIR UNIVERSE! Horrible customer service, no phone support, slow ass shipping even tho I paid extra for next day (got it in same time as regular shipping) and gave me the run around when they sent me a defective digitizer first time. Took me nearly a month from order to get what i paid for and only after I threatened to notify BBB of their horrible service.
Click to expand...
Click to collapse
The queen has spoken yea they suck!
Sent from my MB860 using Tapatalk
quinto0827 said:
do you have instructions on how you fixed it or a youtube video, and also what tools did you need to fix it? my digitizer has been acting crazy and I need to replace it.
Click to expand...
Click to collapse
I watched this video and only needed a small phillips screwdriver and a prytool. I haven't found a video where they show it going back together... Just reverse the steps and you'll be ok. The only hard part was getting one of the ribbon cables back in place. And I gotta say that cable was a b!tch. But I have large fingers and I still got it. So if you have some degree of patience and aren't afraid of messing with tiny stuff go for it.
thanks a lot. i just ordered from the person you suggested from eBay. ill give an update when it comes on Thursday and I replace it.
Cool, I just took my daughters apart, it is dead. I thought that maybe if I disconnected and reconnected the mainboard that maybe it would help. No dice. But I did find that using a pair of locking forceps helped a lot with the cables. Actually it was really, really easy. So if you have a pair, or know someone who works at a hospital that can get a pair, it is worth the trouble. Good Luck.
i just fixed, worked like a charm. and you were right, those damn ribbon cables were a pain. i can finally type regular letters again. lol.
That's great. Was yours pretty much new looking? Mine looks great, there are two tiny dimples on the upper bezel but they aren't easy to see. It's still a 9/10.

Broken Screen, what todo?

Hi
I have HTC Touch Pro 2 and today I broke its screen, it have 3 cracks on it now but strange touch screen is completely working without any problems. I also had screen protector on.
Now what do I have to do? Do I have to replace complete screen or I think I will just need to replace the screen digitizer?
Please guide so I can order it from ebay or if you could recommend any store from where I can buy quality products.
Thanks
Yep, been there done that. You have broken the digitizer glass most likely. I suggest that you get a LCD&Digitizer replacement from ebay like this one.
http://www.ebay.com/itm/LCD-Digitiz...172?pt=LH_DefaultDomain_0&hash=item2c62be3b24
Do some shopping around I only paid ~$12 for my replacement.
Learn from my mistakes and get the set. It is next to impossible to separate the lcd and digitizer. You can usually swap around the various kinds of lcds too. On my sprint tp2 I installed a at&t tilt screen with no issues.
It is not to bad of a job to replace, but the first time is a little nerve racking as you have to do a total tear down. There are videos on the tear down around online. If you live near Seattle WA, I can give you a hand.
wizardknight said:
Yep, been there done that. You have broken the digitizer glass most likely. I suggest that you get a LCD&Digitizer replacement from ebay like this one.
http://www.ebay.com/itm/LCD-Digitiz...172?pt=LH_DefaultDomain_0&hash=item2c62be3b24
Do some shopping around I only paid ~$12 for my replacement.
Learn from my mistakes and get the set. It is next to impossible to separate the lcd and digitizer. You can usually swap around the various kinds of lcds too. On my sprint tp2 I installed a at&t tilt screen with no issues.
It is not to bad of a job to replace, but the first time is a little nerve racking as you have to do a total tear down. There are videos on the tear down around online. If you live near Seattle WA, I can give you a hand.
Click to expand...
Click to collapse
Hi
Thanks, thats what I thought too, so your personal experience says its impossible to separate LCD and digitizer.. thats too sad as it can save me some money but I wonder why they are selling so many digitizers alone all over internet, and that is just for $8 to $10 with delivery.....
So finally you replaced both LCD+Digitizer or you were you able to replace just the digitizer?
and I live in Pakistan so I could only use help here or on any IM
Impossible, no. You will go through probably a dozen before you get to a point where you could separate them 50-75% of the time successfully. You will spend way less money if you get a screen set, or a phone with a bad board/esn number to pull parts from. There is an adhesive between the lcd and the digitizer (usually along the edge). The lcd does not have a protective glass layer, and it is sooooo easy to pull the lcd coating right off the lcd base it is not funny. You could tear apart the one you have as a free learning experience. It is not going to cost you anything but your time.
Saw this video
http://www.youtube.com/watch?v=SYqNlM68_as
Well if its just that then its a piece of cake for me too, Im a technical person.... So what Im going todo is to open my mobile first before ordering and try to separate the digitizer from the screen and if I was successful then I will just order the digitizer and if I was not then I will order a complete screen set like the one you mentioned in your link.
What is this 1st Generation screen and 2nd generation screen... I have the international unlock version of TP2... which one do I order?
craftsvision said:
What is this 1st Generation screen and 2nd generation screen... I have the international unlock version of TP2... which one do I order?
Click to expand...
Click to collapse
No idea.

[Q] How much for UK screen repair on the S3?

Hello all,
Got my S3 a couple of weeks ago and dropped it onto a wood floor on Friday with no case on it (been waiting for mine to arrive from Amazon ). The device seems to be absolutely fine apart from a very small scratch on the top left of the screen. I've been trying to live with it but it's really annoying me and would be more than happy to pay to get it fixed if it doesn't cost absolutely silly money.
Is it possible just to have just the glass replaced or will I have to shell out for the glass and the digitiser etc as well? Has anyone else had their S3 screen repaired?
Thanks
Replacing the S3 screens are pricey, I'd stick with the scratch until you do some serious damage.
It is inevitable the phone will get scratched at one point so I find it hard to believe someone would pay to have a whole screen replaced based on one scratch, you must be crazy!
If the scratch is that annoying get a decent screen protector and you won't be able to see it.
It would be very expensive. The front plate, digitizer, and amoled screen are bonded in one piece and the assembly is sold at ~US$200 in Ebay.
check out this thread .... its a must read for all s3 users with damaged glass ...
http://forum.xda-developers.com/showthread.php?t=1890708
kobz1973 said:
check out this thread .... its a must read for all s3 users with damaged glass ...
http://forum.xda-developers.com/showthread.php?t=1890708
Click to expand...
Click to collapse
I'm not sure, it looks like the front plate and the digitizer are totally inseparable http://www.youtube.com/watch?v=es8gezSdKv4.
Good luck to OP anyway.
Well where I live its costs about 310$
..so I hope I dont break mine
Sent from my GT-I9300 using xda app-developers app
ABC_Universal said:
I'm not sure, it looks like the front plate and the digitizer are totally inseparable http://www.youtube.com/watch?v=es8gezSdKv4.
Good luck to OP anyway.
Click to expand...
Click to collapse
i beg to differ ... did u check out the link to thread i posted ... already a few success stories there ...
and check out this video from about 8mins in, and you can clearly see the glass comes away separately ...
http://www.youtube.com/watch?v=W5IPaCPaY_0
kobz1973 said:
i beg to differ ... did u check out the link to thread i posted ... already a few success stories there ...
and check out this video from about 8mins in, and you can clearly see the glass comes away separately ...
http://www.youtube.com/watch?v=W5IPaCPaY_0
Click to expand...
Click to collapse
Just read, and see that you are about to do the same. Good luck to you as well.
Yet I think the person in the video didn't peel off just the glass but the glass together with the digitizer, which is slightly tinted as seen in http://www.youtube.com/watch?v=es8gezSdKv4.
The cheapest and best solution is to use a mirror screen protector. It will hide your scratch when phone is off.
When Screen on you will not notice it.
I'm sure I have read a thread where someone got it replaced at car phone warehouse for £80ish, not sure how true that is as it does seem very cheap for the job. Worst you can do is ring them and ask for a quote and them tell you this ain't true.
I have insurance which would cost me £25 excess through my bank so not really looked into costs of getting things replaced, but I have taken apart a lot of phones in the past and they are getting much harder to replace things like glass on its own. As said above it would have to have digitizer, which is pretty costly to purchase.
Sent from my GT-I9300 using xda app-developers app
Terpsi said:
Hello all,
Got my S3 a couple of weeks ago and dropped it onto a wood floor on Friday with no case on it (been waiting for mine to arrive from Amazon ). The device seems to be absolutely fine apart from a very small scratch on the top left of the screen. I've been trying to live with it but it's really annoying me and would be more than happy to pay to get it fixed if it doesn't cost absolutely silly money.
Is it possible just to have just the glass replaced or will I have to shell out for the glass and the digitiser etc as well? Has anyone else had their S3 screen repaired?
Thanks
Click to expand...
Click to collapse
you can buy the unit for £150 and follow a youtube video on how to replace, or pay between £175-£225 for a full repair.
I took mine to a Samsung repair centre on a Saturday and had it fixed within 30min, paid £215 but just wanted it done.
The glass and the digiizer are glued together so the whole unit would have to be changed.
jayc1980 said:
I'm sure I have read a thread where someone got it replaced at car phone warehouse for £80ish, not sure how true that is as it does seem very cheap for the job. Worst you can do is ring them and ask for a quote and them tell you this ain't true.
I have insurance which would cost me £25 excess through my bank so not really looked into costs of getting things replaced, but I have taken apart a lot of phones in the past and they are getting much harder to replace things like glass on its own. As said above it would have to have digitizer, which is pretty costly to purchase.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Its 80 snoops for s2 in CPW, 160 for s3 as far as i remember ...
HERE IT IS .. The Video tutorial ..
http://www.youtube.com/watch?v=aZuiCsAtThw&feature=player_embedded#!
Samsung galaxy S4 Front Glass Repair in UK
Terpsi said:
Hello all,
Got my S3 a couple of weeks ago and dropped it onto a wood floor on Friday with no case on it (been waiting for mine to arrive from Amazon ). The device seems to be absolutely fine apart from a very small scratch on the top left of the screen. I've been trying to live with it but it's really annoying me and would be more than happy to pay to get it fixed if it doesn't cost absolutely silly money.
Is it possible just to have just the glass replaced or will I have to shell out for the glass and the digitiser etc as well? Has anyone else had their S3 screen repaired?
Thanks
Click to expand...
Click to collapse
Hi
If the screen still functions and the touch is working properly you can just change the glass face but you will have to be real careful as doing it yourself without the right equipment is risky and you can end up without a screen working at all. the whole screen that is currently on the phone will be completely sealed to the phone so it is a slow process to remove it and you can end up pulling the digitizer off the lcd and again this is not fixable if this happens.
also the finish will not be as good as the original without the right type of liquid glue to go back between the glass and digitizer.
at the end of the day you are better off sending it to someone who does it a lot and has all of the gear to do it, as you will get a better finish at the end.
Mod edit: Removed..

Cracked screen with Insurance

So my wife dropped her Rezound and the screen cracked. We do have the insurance through Verizon and figured I'd check here before calling Verizon since I need to know how to play this and get a replacement. Will they replace my phone or will they only replace it if our phonse is lost or stolen? Does anyone know how much it costs to get a replacement.
Sent from my GT-P5113 using xda premium
With a cracked screen it will cost $99 to replace. If it was a defect with the phone it would of been free. Kinda sucks but its better then shelling out $200+ for a new phone cause of the insurance. This is from personal experience with my own rezound.
seems pretty lame since that's about what it would cost me without the insurance.
Sent from my GT-P5113 using xda premium
If the picture isn't distorted and your glass is simply cracked, just get a Rezound LCD Digitizer with tools from amazon or ebay and some 3M 2mm digitizer tape. It'll only cost you 30 bucks to repair your screen, and you can choose between getting a verizon branded or unbranded digitizer while you're at it.
rickyray9 said:
If the picture isn't distorted and your glass is simply cracked, just get a Rezound LCD Digitizer with tools from amazon or ebay and some 3M 2mm digitizer tape. It'll only cost you 30 bucks to repair your screen, and you can choose between getting a verizon branded or unbranded digitizer while you're at it.
Click to expand...
Click to collapse
ugh, i tried this..only do this if you know what you're doing...i sure as hell didn't, and there's NO repair how to video out there about how to re-assemble the screen..they all convieniently skip that part. i ddin't even know i had to buy new adhesive since nobody said anyhting about that...
in the end, i have a screen with smudges on the LCD from the adhesive i had to pick at, since it was clearly visible underneath the digitzer, and then of course there's dust all over the place because it's impossible NOT to get dust under there, and the ribbon cable is peaking through the top, and i'm sure there's gonna be screen lift at some point. oh, and my bezel is def warped and bent out on the left side from prying with that stupid safe pry tool to get the digitzer out....clearly it isn't so safe!
oh and not to mention that my menu button doesn't fully light up anymore like the rest of them, because apparently you hvae to get teh LED's on there JUST RIGHT for them to light correctly.
yeah it cost $30, but it was a gift to my brothers wife until she can upgrade in a year...sure, she doesn't notice any of that, and it's a huge upgrade from her fascinate, but my brother and i sure do. we both did it together, and if me, someone who tinkers with electronics all the time, and him, a mechanical engineer, can't get it perfect, i'd say to just get the insurance replacement lol i would have, def, especially if you're as picky as me.....
Me doing it myself is probably not going to happen.
Sent from my GT-P5113 using xda premium
$99 later and a new rezound in hand.
Next question!
If I got a lemon, do I just deal with Assurian or can I get a replacement thru Verizon? On the screen when I got the phone it said 1 year Assurian warranty. Do I cancel my $7 a month insurance?
Thanks for the insight if anyone has experience beyond my point so far.
Currently not being productive on my S3.
txkorm said:
$99 later and a new rezound in hand.
Next question!
If I got a lemon, do I just deal with Assurian or can I get a replacement thru Verizon? On the screen when I got the phone it said 1 year Assurian warranty. Do I cancel my $7 a month insurance?
Thanks for the insight if anyone has experience beyond my point so far.
Currently not being productive on my S3.
Click to expand...
Click to collapse
no i think you need to keep asurion to get it replaced warranty wise through asurion. and yeah, you call verizon, but asurion is who warranty replaces it
I wish I could find a way to get another S3 but if she dropped the Rezound, the S3 would have no chance of survival.
Currently not being productive on my S3.

cracked digitizer ...help

4th of july my phone cracked the digitizer ... went on ebay thinking it was going to be an easy fix ,, after researching it does not seem like its going to be possible now hopeing for some alternative ways to getting my phone fixed , I also have sprint tep but that option seems like a no go.. and im trying not to break the bank .... please help thanks john
by the way I also have a digitizer (new)
jraz305 said:
4th of july my phone cracked the digitizer ... went on ebay thinking it was going to be an easy fix ,, after researching it does not seem like its going to be possible now hopeing for some alternative ways to getting my phone fixed , I also have sprint tep but that option seems like a no go.. and im trying not to break the bank .... please help thanks john
Click to expand...
Click to collapse
It can be fixed. Check out this video on YouTube. There were several other videos listed, as well.
https://www.youtube.com/watch?v=3D4uiMCbm9o&feature=youtube_gdata_player
Other than fixing it yourself or finding someone to do it for you, it's physical damage and you'd have to make an insurance claim through Asurion, which will cost you $150:banghead:
Sent from my EVO using xda premium
I cracked mine as well. I ended up getting a kit that had all of the parts except the motherboard for ~$80. It took me about 20 minutes to complete the repair. Pretty easy and cheaper than TEP. As long as you replace the LCD and Digitizer at the same time its pretty easy. It looks like several options minus the battery and back cover are available now for less than what I paid a couple weeks ago.
landaile said:
I cracked mine as well. I ended up getting a kit that had all of the parts except the motherboard for ~$80. It took me about 20 minutes to complete the repair. Pretty easy and cheaper than TEP. As long as you replace the LCD and Digitizer at the same time its pretty easy. It looks like several options minus the battery and back cover are available now for less than what I paid a couple weeks ago.
Click to expand...
Click to collapse
Where did you get this kit?
This place has the kit.
jayjam99 said:
This place has the kit.
Click to expand...
Click to collapse
That's not a kit with everything but the mainboard. That is just the screen and digitizer replacement. It is very hard to seperate the screen from the housing without doing damage. You have to use heat and be very gentle. I know where to get the whole front housing with the screen and digitizer already assembled, which is a better option but it's $95 shipped from china (etradesupply.com). Some of my parts are scratched and I'm looking for a new front assembly with screen basically but I also need a new speaker.
This is honestly the best route to go. Coming from experience, it is extremely hard to seperate the screen from the housing. It is even more difficult to seperate the digitizer from the lcd. This is honestly your best route. You could also try hitting up ebay and try to find one cheap with a bad esn and take the parts needed.
http://www.etradesupply.com/oem-htc...embly-with-front-housing-and-light-guide.html
landaile said:
I cracked mine as well. I ended up getting a kit that had all of the parts except the motherboard for ~$80. It took me about 20 minutes to complete the repair. Pretty easy and cheaper than TEP. As long as you replace the LCD and Digitizer at the same time its pretty easy. It looks like several options minus the battery and back cover are available now for less than what I paid a couple weeks ago.
Click to expand...
Click to collapse
Still waiting for details on where you can get the screen plus back housing/bezel for $80 because I need both of these & the best price I can find is about $100.
OstrichSak said:
Still waiting for details on where you can get the screen plus back housing/bezel for $80 because I need both of these & the best price I can find is about $100.
Click to expand...
Click to collapse
Sorry, been traveling. I got mine from EBay from this guy. http://stores.ebay.com/Dr-WatsonsClinic
landaile said:
Sorry, been traveling. I got mine from EBay from this guy. http://stores.ebay.com/Dr-WatsonsClinic
Click to expand...
Click to collapse
It doesn't look like he sells them anymore.
So bottom line is I can't change the digitizer with out damaging the LCD FML
Sent from my EVO using xda app-developers app

Categories

Resources