Related
My photon was on 5% about an hour ago... then it turned itself off. I plugged it in to the charger and a "white/faint yellow" LED comes on. Normally the photon doesn't have a charge LED so this certainly struck me as odd.
It has been sitting for almost an hour and still won't turn on.
I took the battery out and reconnected the charger and the white/faint yellow LED comes back on, even with the battery pulled out.
What is happening here? Has anyone seen this?
I've see green/orange/red LED flashes for diff things but never white.
Well I found this thread: http://forums.androidcentral.com/sprint-photon/107931-led-not-working.html#post1147045
Looks like white means very low battery and charging. Now the white light has gone off while plugged in... But it still will not turn on
Turns out, I was plugging it into a PC usb that didn't have the drivers installed. The phone won't charge if the moto drivers are not installed, regardless of the light
I plugged it into a wall charger and viola... its back and running.
False alarm!
Lol, exact same thing happened to me! I totally freaked out, but plugged it in a wall and started working.
same thing happened to me yesterday. I plugged into the wall, NOTHING. I started freaking out, until I pulled the battery and re installed it. LED charge light then came on and all was good. Weird.
Can someone help me i have a photon also but when i plug it up it says failed to boot 2 starting rsd mode battery too low to flash and it wont boot up when plugged up to a computer. also when i plug it into the wall it just boot to the m sign
rodre12 said:
Can someone help me i have a photon also but when i plug it up it says failed to boot 2 starting rsd mode battery too low to flash and it wont boot up when plugged up to a computer. also when i plug it into the wall it just boot to the m sign
Click to expand...
Click to collapse
- Pull battery
- Put it back in so it's off
- Keep it plugged into the wall to charge it
- Once charged, power into RSD mode (power+vol up)
- Plug into computer and start RSD and flash 154_5 SBF to get back to stock
- then flash 198_7 SBF for good measure.
- Reboot
When i try that nothing works, it just stays on the white led light
I just bought mine from best buy and it did the same thing..they exchanged the phone since it was defective..
Sent from my MB855 using xda premium
Photon won't turn on anymore. White LED when plugged in
i have a refurbished replacement photon from best buy geek squad that i got last month. within a few days it was acting strange and randomly/often turning itself off. the battery was fully charged yet the unit would often times power down. this happened a lot the first few weeks. then last week the issue seemed to stop and it stayed on 24/7 as i charged it frequently. all was well until yesterday.
i dropped my phone from about 2 feet. the phone turned off and only the "m" boot up screen appeared after i powered on, then it went black. i had a fully charged battery in the unit when this happened. i plugged the charging cable into the phone and it kept booting up to this static "m" screen then turning off. the LED notification light went red and after numerous times powering on and off and resetting the battery (and sim card) i finally got a "5%" battery screen. a few seconds later it showed 100% battery then kept rebooting to the static "m" screen and shutting off again. then i started getting a "?" screen for the battery a few times and back to the 5% and it changed to 80%/100% very quickly and back to the blank screen. i left it plugged in overnight.
now the LED notification light turned white and the phone cannot be powered on. i tried another battery without any success so that shouldn't be the issue.
any ideas what to try next?
same thing happened to me.
thevaporz said:
i have a refurbished replacement photon from best buy geek squad that i got last month. within a few days it was acting strange and randomly/often turning itself off. the battery was fully charged yet the unit would often times power down. this happened a lot the first few weeks. then last week the issue seemed to stop and it stayed on 24/7 as i charged it frequently. all was well until yesterday.
i dropped my phone from about 2 feet. the phone turned off and only the "m" boot up screen appeared after i powered on, then it went black. i had a fully charged battery in the unit when this happened. i plugged the charging cable into the phone and it kept booting up to this static "m" screen then turning off. the LED notification light went red and after numerous times powering on and off and resetting the battery (and sim card) i finally got a "5%" battery screen. a few seconds later it showed 100% battery then kept rebooting to the static "m" screen and shutting off again. then i started getting a "?" screen for the battery a few times and back to the 5% and it changed to 80%/100% very quickly and back to the blank screen. i left it plugged in overnight.
now the LED notification light turned white and the phone cannot be powered on. i tried another battery without any success so that shouldn't be the issue.
any ideas what to try next?
Click to expand...
Click to collapse
Try to fully charge your battery using portable battery charger.
When battery full charge, try to entering recovery mode. From off condition, press both power and volume down, press down until you find android recovery and press volume up button. After you see exclamation logos, press both volume up and down. Then select wipe data. Hope fully you can still entering recovery mode.
If you cannot enter recovery mode, try to enter RSD protocol.
step is, connect your photon to PC using cable data, press both volume up and power, wait until it show RSD Protocol, than flash it again.
How to flash using RSDLite is in development section, you can read there.
Hopefully its can work
DssTrainer said:
Turns out, I was plugging it into a PC usb that didn't have the drivers installed. The phone won't charge if the moto drivers are not installed, regardless of the light
I plugged it into a wall charger and viola... its back and running.
False alarm!
Click to expand...
Click to collapse
I just had a mini-anxiety attack until I found your post. Thank you!
Last night I was using my phone and turned it on sleep due to having <10% battery life left. I tried turning it back on am hour and a half later and it didn't so assumed it drained, so I threw it in the charger but the battery didn't turn on. I left it in the charger over night. I woke up and tried turning it on but it still didn't budge. I tried letting it charge through both my macbook, my chromebook, several different cables and outlets, all for around 10 minutes each. My phone still won't turn on.. Nothing happens when I try to boot into CWM (volume rocker and power button hold method) I now think it may be bricked and I need to get it back to a working condition soon...
My phone is the AT&T SGSII (i777) running MIUI 2.3.7 1.12.30 (newest version) under the Siyah 2.6.3 (also newest version)
Is there any way I can fix this?? I saw somethings about these 'jigs' but is there a way fix it without using a jig and only using a computer? Can someone tell me what could possibly be wrong?? Please help me!!
*PS my macbook can dualboot into windows 7, otherwise my phone wouldn't be rooted
Hmm, LPM might be broken in MIUI.
Try this, I saw one person indicate that it worked:
Enter download mode by holding VolUp + VolDn when inserting a USB cable from a PC.
DO NOT try to flash anything - just let it sit there for 5-10 minutes!
After that, hold Power for 10-15 seconds until the device resets.
Again, DO NOT try to flash anything!
The other option is to find a standalone charger.
And next time - if it's at 10%, put it on a charger!
Battery Charging
ChuckaDucky said:
Last night I was using my phone and turned it on sleep due to having <10% battery life left. I tried turning it back on am hour and a half later and it didn't so assumed it drained, so I threw it in the charger but the battery didn't turn on. I left it in the charger over night. I woke up and tried turning it on but it still didn't budge. I tried letting it charge through both my macbook, my chromebook, several different cables and outlets, all for around 10 minutes each. My phone still won't turn on.. Nothing happens when I try to boot into CWM (volume rocker and power button hold method) I now think it may be bricked and I need to get it back to a working condition soon...
My phone is the AT&T SGSII (i777) running MIUI 2.3.7 1.12.30 (newest version) under the Siyah 2.6.3 (also newest version)
Is there any way I can fix this?? I saw somethings about these 'jigs' but is there a way fix it without using a jig and only using a computer? Can someone tell me what could possibly be wrong?? Please help me!!
*PS my macbook can dualboot into windows 7, otherwise my phone wouldn't be rooted
Click to expand...
Click to collapse
All the SGS2 i777 phones come with a plugin wall charger, why not give that a try.......
If you cannot find the charger, you can buy one for less than 3 bucks including shipping on Amazon.com
http://www.amazon.com/Samsung-Trave...=wireless&ie=UTF8&qid=1325629174&sr=1-1-fkmr0
Good Luck!
Something similar happened to me, where the battery drained so much that the phone wouldn't charge. When I plugged it into a computer/outlet, it just power cycled because as soon as you plug it in, the screen turns on (pretty stupid actually) and full brightness shows your battery "charging". Due to the phone not being able to directly pull power from the outlet (from what I can understand, if I plug in a charger and take the battery out, the phone shuts off) it can't charge fast enough, due to the screen and soft keys taking up the charge. I may be wrong, but this is what I think is happening.
Only way I could solve this was to plug the battery into my spare battery charger which came with my two spare batteries.
The thing is I can't put it into download mode or even recovery. Whenever I hold the volume buttons together when I plug it into my computer to access download mode, nothing happens and the screen remains blank and off. When I try doing the same thing and also hold the power button also to access Recovery mode, nothing happens, and the screen still is off. Every once in awhile when I try turning on the phone (which is plugged into an outlet) the 'battery charging' screen pops up for a split second and turns off. I have plugged it into Several different wall chargers (all that are Micro USB including the one the phone came with) along with several different Micro USB to USB cables to try to charge in the computer. It's definitely not the chargers nor the cables because they work with other devices. I think my phone is bricked... DX
why don't you buy another battery and see if that works if it doesn't just bring back the battery.....good luck
ChuckaDucky said:
The thing is I can't put it into download mode or even recovery. Whenever I hold the volume buttons together when I plug it into my computer to access download mode, nothing happens and the screen remains blank and off. When I try doing the same thing and also hold the power button also to access Recovery mode, nothing happens, and the screen still is off. Every once in awhile when I try turning on the phone (which is plugged into an outlet) the 'battery charging' screen pops up for a split second and turns off. I have plugged it into Several different wall chargers (all that are Micro USB including the one the phone came with) along with several different Micro USB to USB cables to try to charge in the computer. It's definitely not the chargers nor the cables because they work with other devices. I think my phone is bricked... DX
Click to expand...
Click to collapse
If the screen EVER turns on it's not bricked.
I suggest leaving it plugged in to a factory wall charger (not USB) overnight.
Worst case you may need a standalone charger to put some "juice" into the battery. I know Staples sells a universal one made by Lenmar, but it's really overpriced ($50!!!!)
I use this and i love it. It comes with an extra samsung battery too.
http://www.amazon.com/Samsung--CGPK..._1_1?s=wireless&ie=UTF8&qid=1325639756&sr=1-1
If anything, head to an AT&T store and pop the battery out of their test phone and put it into yours. See what happens, sounds like there's an issue with the charger or battery.
Entropy512 said:
Hmm, LPM might be broken in MIUI.
Try this, I saw one person indicate that it worked:
Enter download mode by holding VolUp + VolDn when inserting a USB cable from a PC.
DO NOT try to flash anything - just let it sit there for 5-10 minutes!
After that, hold Power for 10-15 seconds until the device resets.
Again, DO NOT try to flash anything!
The other option is to find a standalone charger.
And next time - if it's at 10%, put it on a charger!
Click to expand...
Click to collapse
Yup ran into that issue a couple months ago and just put it into download mode to charge. easy fix
Edit. I used a jig though.
Sent from my SAMSUNG-SGH-I777 using xda premium
Thanks for all the help! I ended up going to the at&t store and they told me the battery was defective. The guy was super nice and even though he saw my phone was rooted and had a custom rom he just told me that I probably should unroot only for the warranty but gave me a new battery for free anyway and was very nice about it. I also bought a jig just incase anything goes wrong again. But seriously, thanks to all of you!!
Ok, I tried root, installing a new recovery and then installing CM 7.2
1) Photon Torpedo for root - no problem
2) Installed CWM recovery apk - and then boot into CWM recovery - no problem
3) Backup system to sdcard - no problem
4) install CM7.2 + gapps - it flashed no problem
(now as you can tell, i forgot to unlock the bootloader)
5) reboot - PROBLEM
I got the "Failed to Boot 2" error, i had it plugged into AC and had 70-80% charge when i started, however, i let it set after the reboot for 20 or so minutes, was off doing something.
I tried rebooting a couple of time, same problem
EVENTUALLY: It would simply not turn on anymore, i think the battery is drained and it will not charge being plugged into wall socket or USB.
How do I get it to charge?
- Do I find a friend with a photon running stock that i can put my battery in, will it charge that way?
- Can a sprint store simply charge the battery for me?
I figure once I can get that going, I can run RSD lite and recover via an SBF image.
Thanks
This has happened to me.. battery drains and doesn't whant to boot.. what I do is.. take battery out., plug in ur charger.(sometimes you get a white light,) press power button, YOU KIGHT HAVE TO TRY SEVERAL TIMES until the green light comes on..but once you see it put your battery back in.. and it should start charging.
Sent from my MB855 using XDA App
When I say several times.. I ment unplugging your phone from charger, plug back in , push power button.. and again( until it powers on) not just pressing power button until. Didn't know if I specified well enough. Hope this helps.
Sent from my MB855 using XDA App
i actually tried a different usb port a bit ago and have a white indicator light on now while plugged in... not sure what that means
I will try your way in a bit if this doesn't mean anything useful tho... thanks
K, am nor really sure what the white light is either.. I just know, on stock when you plugged phone to charge (being dead) green light turns on,screen Motorola logo shows then goes to a battery charging animation.. the white light did nothing for me. But hope you run better luck.
Sent from my MB855 using XDA App
after about 5 minutes i got a green light now... maybe the software for the battery charge display got whacked when i wiped system and tried to install CM 7 - but the hardware part of the charge works.
The only thing I can think of is that white means: i'm charging, but don't try to boot me up at the moment.
I also notice, once it gets a charge it tries to automatically boot - anyway to avoid this?
If its charging you should be able to just boot into RSD lite mode without the phone trying to boot into a ROM..
Sent from my MB855 using XDA App
If the phone is off and u plug it to charge, it shouldn't boot into the ROM, yes the Motorola logo comes up as it does when u turn the phone on, but then goes to charging..
Sent from my MB855 using XDA App
Well, every time it boots i get the
"Failed to boot 2"
Something about NvFlash (can't remember the text)
"Battery to low to flash"
Then it is just stuck there, but not sure if it is charging at that point or not... but not sure if i have enough battery to RSD Lite an SBF image
t3xazboy said:
If the phone is off and u plug it to charge, it shouldn't boot into the ROM, yes the Motorola logo comes up as it does when u turn the phone on, but then goes to charging..
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Mine boots into *nothing* i forgot to unlock the bootloader so the rom i flashed gives me a "Failed to Boot 2" every time it powers on
K, let me power my phone off and kinda try to recreate the "not charging while plugged in" problem.. (sometimes it happens when I power off.) And ill see wich method gets the phone to just charging.. br
worse comes to worse, i know someone with a photon and i can ask if i can charge my battery in their phone
Just tried it.. and yeah phone wouldn't boot or charge by pressing the power button or connecting to charger.. but I did what I always do.. pull battery, connect charger, green light turns on, I insert battery, and goes to charging.. I also tried goin on RSD lite mode without battery inserted. And I got the same error about battery to low to flash. Have you tried this method I just wrote in this reply to get battery to charge?
Sent from my Mopho Cm7.2
Here are a couple things i tried
1) remove battery
2) make sure phone is not connected to charger
3) plug in charger
4) logo appears - says "Failed to boot 2"
5) as "Starting RSD Mode" starts, i have inserted the battery
6) I still get "Battery is too low to flash"
also tried tried with vol-up (Fast boot mode) and vol-down (NvFlash recovery mode) - and ultimately i get "Battery is too low to flash" no matter what
Thanks for the help, however.
side note: found an external battery charger for the photon on amazon for $4, i might just buy one.
Did u insert battery before logo appears? If so, then I am out of ideas, lol hopefully you can get it working soon.
Sent from my Mopho Cm7.2
I just tried something like that now. The charger is plugged into the wall outlet. Basically i plug it in, green light comes on, quickly snap the battery in place before logo appears
I get the logo and the messages at top as normal, but at that point, i don't think it is charging anymore
Lol darn it.. at that point am out of options.. sorry it didn't work.. btw how you forget to be unlocked lol.. anyhow I would go to your friends, borrow his charged battery just so you can get to stock, and start fresh, then return battery obviously, lol
Sent from my Mopho Cm7.2
Yeah i have to charge it elsewhere - i just read some other threads here about people messing up their boot with a "Failed to boot 2" error, the system simply will nto charge a battery at the boot loading screens... so, I bought that charger off amazon for $7 (including shipping), be nice to have it if i continue to fiddle with the phone.
for the next few days... people can't call me... whoop de doo. However, I am pretty certain it is not bricked, so i'm not freaked anymore.
Still, thanks for all the help you tried!
Could you post a link for that charger, I have a second battery I would like to be able to charge.
Lol.. well there u go,
Sent from my Mopho Cm7.2
I'm on cleanROM 3.7 and everything so far is running GREAT. Recently I wiped the battery stats using Scott's tweaks, of course after a full charge and then unplugging for a full drain without charge, as with other battery calibrations on previous devices I've owned or used. After charging without break, I cannot reach a 100% charge, it stops at 99%. I am now not so sure about charging overnight as I suspect the battery/device might overheat since a 100% charge does not seem to be attainable. Anyone know about this issue?
Does the light go green?
Sent from my VIZIO tablet using xda premium
You might want to take a gander at the following post
http://forum.xda-developers.com/showthread.php?p=9777867
Your battery gauge is lying to you (and it's not such a bad thing)
That thread might be useful if it said anything about a 99% charge. Usually the little LED light turns from orange to yellow when it becomes fully charged at 100%. The light is staying orange and will not display 100%, only 99%.
tschmid5 said:
That thread might be useful if it said anything about a 99% charge. Usually the little LED light turns from orange to yellow when it becomes fully charged at 100%. The light is staying orange and will not display 100%, only 99%.
Click to expand...
Click to collapse
Try charging with the phone off.
Sent from my ADR6425LVW using XDA
nosympathy said:
Try charging with the phone off.
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Ok, so I turned my phone off last night before charging and I was able to attain the yellow LED light indication for a full charge but when I power on my device it boots up almost immediately. It skips the HTC screen and goes straight to my custom boot animation and then boots up. When the device boots up any other time I get the white HTC screen and everything like normal.
tschmid5 said:
Ok, so I turned my phone off last night before charging and I was able to attain the yellow LED light indication for a full charge but when I power on my device it boots up almost immediately. It skips the HTC screen and goes straight to my custom boot animation and then boots up. When the device boots up any other time I get the white HTC screen and everything like normal.
Click to expand...
Click to collapse
*Edit*
That's because you have fastboot checked in settings. Pull the battery, put it back in, then charge til green. If its any consolation though my battery does the same thing with the phone on it gets to 99 and hangs, but I've found that if I reboot it while on the charger it will turn green within about 10 minutes of being back on. Usually I don't worry about it being at 100% because when it actually is at 100% it goes back to 99% like 10 seconds after I unplug it. But to sum up, pull the battery b4 you charge and put it back in or uncheck fastboot then power off anand charge.
Sent from my ADR6425LVW using XDA
SL556 said:
*Edit*
That's because you have fastboot checked in settings. Pull the battery, put it back in, then charge til green. If its any consolation though my battery does the same thing with the phone on it gets to 99 and hangs, but I've found that if I reboot it while on the charger it will turn green within about 10 minutes of being back on. Usually I don't worry about it being at 100% because when it actually is at 100% it goes back to 99% like 10 seconds after I unplug it. But to sum up, pull the battery b4 you charge and put it back in or uncheck fastboot then power off anand charge.
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
why pull the battery? why not simply uncehck fastboot??
I try not to ever pull my battery..
adb reboot if needed will work 99% of the time if you're by your computer.
andybones said:
why pull the battery? why not simply uncehck fastboot??
I try not to ever pull my battery..
adb reboot if needed will work 99% of the time if you're by your computer.
Click to expand...
Click to collapse
Well I usually just hold the power button and push reboot if the phone needs rebooting. You probably know but you cant also hold power + volume up + volume down for about 5 seconds and it will also reboot itself. I was just trying to tell him the different ways to get the phone to completely turn off. That's why I suggested two different ways. But yes as Andy said, unchecking fastboot should be the easiest way.
Sent from my ADR6425LVW using XDA
I plugged in my razr before I went to bed. I've been using a HTC plug and cable for the last few months no problems. Woke up this morning and battery was at 5% and then the phone died completely soon after. I plugged it in using my original motorola plug and cable. The dual core screen came up and then the battery level said 0% and it looked like it was charging. It died again after about half an hour. Now nothing will get the phone going. I also tried the hard reset (Power and volume down). The phone is unrooted and hadn't been updated to Jellybean yet.
Any ideas what I can try?
razzrrrr
cathain said:
I plugged in my razr before I went to bed. I've been using a HTC plug and cable for the last few months no problems. Woke up this morning and battery was at 5% and then the phone died completely soon after. I plugged it in using my original motorola plug and cable. The dual core screen came up and then the battery level said 0% and it looked like it was charging. It died again after about half an hour. Now nothing will get the phone going. I also tried the hard reset (Power and volume down). The phone is unrooted and hadn't been updated to Jellybean yet.
Any ideas what I can try?
Click to expand...
Click to collapse
Try using the correct charger and charge it for about an hour, thats the first thing I would try. How long is the htc cable you're using because the longer the cable the slower the charge.
I have tried multiple different chargers with no joy. I think the problem is with the connection. When I plug a charger in the white charging light flashes briefly for a second. I checked the connection for dust and it looks clear?
Try Booting into bp tool or hw diag (hold vol up and vol down then press power should see black screen with white text vol down moves cursor vol IP selects) the phone should charge if left in one of these modes (if you can even make it this far without the bat dying that is). if that don't work could try disassembling then charging the battery directly (never tried this its only an idea try at you own risk)
My xt910 razr maxx has suffered exactly the same fate overnight. Worked fine yesterday now it's dead with the only sign of life from the white led when attaching the moto usb charger. Phone wasn't run flat prior to this. Baffling
jdjdj2001 said:
My xt910 razr maxx has suffered exactly the same fate overnight. Worked fine yesterday now it's dead with the only sign of life from the white led when attaching the moto usb charger. Phone wasn't run flat prior to this. Baffling
Click to expand...
Click to collapse
I don't even get the white light when I plug mine in any more! Have you tried the suggestions above?
cathain said:
I don't even get the white light when I plug mine in any more! Have you tried the suggestions above?
Click to expand...
Click to collapse
Yes I have and no button combination produces as much as a glimmer. I've had the back off and checked the battery for charge, it shows 4.3 volts so it's not that. Something has failed catastrophically I fear.
Check the battery's cable that connects to your phone.If that cable was broke,you can just see the battery level but without charging it.
Sent from my XT910 using xda app-developers app
I've read around this a little now and have invested £3 in a Motorola Factory Cable of fleabay which hopefully will resolve the issue. Due to be delivered next week so I'll keep you posted......
Well got the factory cable and tried it holding the vol down button. Nothing. Took the back off the phone and checked the voltage of the battery 2.75v. Removed the battery and tried the factory cable with vol down. Still nothing. Reinstalled battery and left charging off a pc overnight, this morning it had risen to 2.83v. Starting to think that this phone has had it
Cut the end off a micro usb cable, exposed the wires and connected the red and black to the battery terminals then plugged it into the moto wall wart. Left it until fully charged....volt meter read 5.1v, the output of the charger. Disconnected and checked charge, 4.2v out of the battery.
still dead. Nothing. No red moto screen, no recovery nothing. Something else must be amiss. All I get is a brief white led flash when I plug in the standard charger cable.
anyone have any ideas where to go from here other than the skip?!
Just resurrecting this thread in the hope someone has found a solution....
I still have a brick which is unresponsive to two factory cables plugged into my PC with and without the battery in.
Trouble is I've got pictures on there I'd like to recover if possible which causes me to persist with this troublesome device!
http://forum.xda-developers.com/showthread.php?t=2431617
I access the boot menu by holding both vol up and down, and pressing the power button (hold for ~2 seconds, and release the power button, while still holding vol +/-. Volume down will only send you to APFastboot. Check out the post, I encountered the same problem. The final method I tried was the winner. Good luck, and let me know if you have any questions.
Thanks for that, I'll certainly give it ago when I get a free hour one evening this week. I am concerned though that the factory cable doesn't work, I was under the impression that the phone should at least respond to its connection in some way - it doesn't even when vol-is depressed when connecting to pc.
The only response I get from the phone is a brief flash of the white led as the usb cable (factory or charging) is connected to it.
That indicates that there isn't any power management remaining on the phone, and the battery is pretty weak. You'll need to get the battery charged up manually. After you flash with the last method I used, you should be able to reconnect the battery and charge the phone all the way up before booting. Sounds like you're having the exact same problem I did.
Sent from my XT912
Really , Really wanted this to work but it doesn't look promising.
Made the USB charge cable as described (white and black twisted together to -ve, red on its own to +ve). Battery removed from phone, usb on charge cable connected to PC.
5 Volts found at the battery connection terminals. Original Moto Data cable connected to phone then PC. White LED flashed on for slightly longer than before then off. No response from phone - nothing on the screen or vibration with or without any combination of Vol- and vol+.
Battery refitted and charge lead attached to terminals as above to charge from PC. Now reading 4V across the terminals charge lead plugged in, 3.84V cable unplugged so presumed charged.
Still no response other than the brief white LED from the phone with either the Data or Factory cables and Vol-(or any other Vol configurations).
Any ideas???
I assume you tried pressing and holding all the buttons, for five or ten seconds, or even a little longer, to try a full reboot. Beyond that, I wish I could help more. I'm slap out of ideas. This was the last step for me (as the solution usually is). The main board might have had it, though I don't have a clue why.
Sent from my XT912
I'm thinking dead mobo too. When it died it did so overnight without provocation - no flashing or tinkering, it was left on the kitchen sideboard and found dead in the morning. oh well I've tried. many thanks for your help:good:
Glad to try and help. I guess it's time to move on to the next device! Let us know if the phone sporadically decides to work, or you figure out a solution!
Sent from my XT912
This might work
jdjdj2001 said:
Really , Really wanted this to work but it doesn't look promising.
Made the USB charge cable as described (white and black twisted together to -ve, red on its own to +ve). Battery removed from phone, usb on charge cable connected to PC.
5 Volts found at the battery connection terminals. Original Moto Data cable connected to phone then PC. White LED flashed on for slightly longer than before then off. No response from phone - nothing on the screen or vibration with or without any combination of Vol- and vol+.
Battery refitted and charge lead attached to terminals as above to charge from PC. Now reading 4V across the terminals charge lead plugged in, 3.84V cable unplugged so presumed charged.
Still no response other than the brief white LED from the phone with either the Data or Factory cables and Vol-(or any other Vol configurations).
Any ideas???
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=QfT2Bejkcdk&feature=youtube_gdata_player
I am not sure if you already watched this video, its for droid razr maxx, charging a dead battery and works perfectly for droid razr too.
My droid razr was exactly in same condition, white light and no charging, did not power up, completely dead.
I popped open the back case, connected the modified usb cable wires to the positive (Red wire) and negative (black wire) ends of the battery and let it charge (stay connected) for one hour. Then i pressed vol up+ vol down + power button. And my phone switched on.
If only your battery is dead, this should work.