So, I'm going about installing CWM on a refurbished phone, all because the original phone was fully bricked on the GB OTA back when it got pushed out.
I also got a new PC, so I just installed the drivers, put the phone into Download Mode... getting the infamous "USB Device Not Recognized" error.
Considering the phone being a refurb, I still have the cable from the other Fascinate. Doubt it'd be the cable. Win7 Pro x64 user.
I am going NUTS.
Related
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
espy1988 said:
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
Click to expand...
Click to collapse
I have the same problem on my PC. I would plug in the phone and my mouse would stop working. No tethering app installed or anything.
Anyway, I just tried the ports on the back of the PC and those worked. Try a port closer to the MB
I've tried all my ports. It's still not recognized.
Check the cable and power source. Be sure cable is with good quality. I hade the same issue. I fixed it with original HTC cable and back panel USB from my deskop computer. Front USB of desktop computers often are not enough to power that consumption.
After updating to Froyo it started working again. Thanks though. I still have no clue what caused it.
Bumping to confirm, I found this thread after getting the same error. I had tried several of the USB ports on my computer but after reading this tried the 2 I hadn't yet, they both worked. Not sure why only those work now, but they do work.
Hope this helps someone.
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Vibrant UnBrickable Mod
The same thing is happening to my Vibrant. Tried Rooting and installing various ROMs and it is still "Not Recognized". Tried all ports on all PCs (4) and Laptops (1) and non of them work. espy1988, how did you upgrade to Froyo 2.2 if you could not connect to PC and Kies? This used to work without an issue.
Thanks
Tombias said:
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Click to expand...
Click to collapse
Like said above u might need to be debricked.
seems like ur phone is hard bricked.
---------- Post added at 04:33 AM ---------- Previous post was at 04:26 AM ----------
have u tried Odin back to stock using Odin or hemidal ?
I have the same problem now. I have had my Vibrant for over a year never with an issue. I have Odined it back to JFD dozens of times but now it will not recognize the usb device.
I have GB bootloaders, but never a problem before. When changing Roms I usually Odin back to JFD first and start clean.
My problem started with the phone getting stuck in landscape mode. I was running a 2.3.4 GB rom Sensation. I reflashed a few times but whenever a restored anything from Titanium it would revert back to landscape only. I decided to go back to a 2.2 rom and plugged in the phone to Odin and it was not recognized, also not as a mass storage device, no go. I used Samba to copy a 2.2 rom, Trigger, to the phone and flashed from there. The phone is good now except the computer still won't recognize it. I can use Samba to access the SDCard but I hate not being able to use Odin if things go south. Tried all usb ports and a new cable, no go. Really wierd.
Looking for suggestions......
If you're still under warranty claim it & send it.
Had same problem. There is no fix short of replacing USB port.
I found my problem. It was dirty/corroded usb port. I carefully cleaned it out (took a few times) and it's all functioning again. I also cleaned the contacts on my original usb cord and it is working again also.
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
jnusz said:
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
Click to expand...
Click to collapse
Have you tried installing the installing/re-installing the Samsung drivers (LINK), using another USB cable, or even another computer? I just want to make sure you've tried it all before attempting to do a hardware mod.
Anyhow, you can find a link to the unbrickable mod and other hardware mods in the "Official XDA Vibrant Bible Thread", under the "MODS/SCRIPTS" section (LINK).
Mine is the cable btw. My wife has a GSII and I was able to use her cable.
I might of done something awhile back, I haven't connected my Mozart to my computer in 4 months. But now Zune wont connect to my phone.
So i tried on a laptop and similar result.
My computer says my phone needs an update. Laptop says nothing...
It recharges.
Im running custom version: Nextgen+3.2
But i was running a totally different custom firmware before and had a same issue. I restored the phone.
I dont want to offically update my phone.
I tried this:
http://www.zune.net/en-us/support/sync/solvingproblems/doesntdetectphone.htm
People!, I'm about to pull all my hair out on this one
Vibrant is soft bricked in a boot loop after a incomplete flash, I am able to get it into download mode but both my windows machines say USB device isnot recognized, and thus, I cant use ODIN to return to stock. When I try to manually point windows to the samsung drivers I get nothing…
So far I have tried drivers from:
-Bay_wolf's AIO Vibrant Toolbox 2.5
-USB drivers for vibrant from samsung support site
-Drivers from samsung keyes
Side notes that might help: I was perviously using a Hellybean Rom. My device displays "Galaxy S gt-9000" on boot... not sure when that came to be but maybe some rom changed some important recognition stuff??...
I found this thread http://forum.xda-developers.com/showthread.php?t=1008383 but no help...
Any help would be greatly appreciated!!
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Toast6977 said:
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Click to expand...
Click to collapse
Thanks a ton for reply but, sadly, no dice.
Tried connecting the phone, getting the "unrecognized device" prompt, finding "unknown device" in device manager, right clicking to uninstall. rebooting my machine, using various install methods to re-install drivers, re-connecting, and nothing.. same issue...
I lost the original cable a while back, but can't accept that NONE of the other 5 cables used are all broke... specially if the computer recognizes something going on... is it worth buying a new one?
Losing hope here, been like this for 4 days now, think it's time to go get a new phone. :crying:
Even so, it would have been nice to get what was a perfectly working phone back if only to keep it as a mp3 payer.
If anybody in New York, NY has a working odin set up that can do this for me, I have a 6 pack of your favorite beer with your name on it.
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
For what its worth, the gt i9000 screen appears after your on a custom GB boot loader and Odin back to stock (or probably Odin flashing any other ROM) you can change it by flashing the GB boot loader again. My phone says its a i9000 too, but I'm just about lazy enough to not bother changing it, lol.
So that's unrelated.
eksasol said:
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
Click to expand...
Click to collapse
Ok, faith momentarily restored. But I have questions:
-What do you mean when you say "check the option to also delete USB driver and uninstall any drivers"? I dont get such a prompt from right clicking on "unknown device" and selecting uninstall? Is there another method to uninstalling drivers?
-In the link attached, I can only find "Device(Install),USB Driver (Software) (ver.1.0)" not the 1.5.3 version mentioned. What am i doing wrong here? currently searching google for the 1.5.3 but finding nothing.
I get into download mode by holding volume- up + power. Have 2 PCs ( win xp and win 7) and a mac running mountain lion (but never ever have been able to get Heimdall to work, so devoting time to odin.)
Thank you for the time + help, guys, I really do appreciate it in the time of utter un-nerdness.
If the device is already installed it will have a check box that said "Delete the driver software for this device." If its unknown then obviously not. By "uninstall any driver", I mean uninstall any Android drivers you current have installed and reboot before you reinstall the new driver.
Although I doubt it will make a difference than the one I linked above, you can try the Samsung driver version 1.5.3: http://www.mediafire.com/?r0uc3h413qcy80z
If you did manage to get into download mode and see this: http://images.google.com/search?num=10&hl=en&site=&tbm=isch&source=hp&q=download+mode
Then it mean there is a very good chance you can restore the phone, if you can find a computer to recognize it and Odin to see a COM port.
I definitely think it would be worth the money to go buy an OEM USB cord. I can't tell you how many times I have seen this and a new USB is the fix.
sent from the depths of helly bean
OK guys...
My friend, who also owns a Vibrant, let me borrow the cable that came with the phone for the last 2 days.
Tried to make ODIN work on both PCs at home, gave Heimdall a shot on my mac, even hijacked a computer at work for the better part of the morning and freshly installed USB drivers 1.5.3 before connecting. All for nothing... “Unknown device” across the board....
At first I felt that with being able to get into download and have SOME kind of a reaction from connecting to PC had to be a good sign. Almost completely convinced that there is some unknown, unworkable hardware problem present. Definitely, officially, unremarkably out of ideas here.
Nothing is beautiful and everything hurts.
Last thoughts? Options at this point?
Also, tried One-click Unbrick tool on mac. I got a "is your phone plugged in, is it on download mode?" error, but anyone reading this down the line with a similar problem should check it out.
http://forum.xda-developers.com/showthread.php?p=15330252
Running CM at the moment, but I have tried SEVERAL roms. I'm starting to think the micro-usb port of my phone is jacked. Because I can't get ANY pc to do anything be it in recovery, bootloader, or running any rom. Also tried several usb cables. Tried SEVERAL drivers also. But all's I get is "device not recognized" in the windows popup and in device manager it says "unknown device" under usb.
Thoughts?
Take it to the sprint store and tell them the USB on it is broke, in fact you can break it more if you wish. When they run their test they will see its broke, flash stock rom on it and see its STILL broke, and give you a new phone.
That sucks. Was hoping for some kind of fix. Guess I'll call Sprint monday.
Sent from my EVO
Hi everyone,
I have an SII GT- I9100 that I installed a custom ROM on a while back (probably 2 years ago). After a while it got badly bricked I don't remember what happened, and not only that
the charging port was also messed up so I couldn't connect it to my pc (pc wouldn't recognize it unless I held the cable in with force, but even that didn't work after some time).
It's been sitting on a shelf for about a year and I decided to buy a new charging port, replace it, unbrick it and give it to my mom.
I did replace it and I can connect it to my pc now but there's still issues. On my main windows 10 pc it gives me an error "USB device not recognized, the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". (I've reinstalled usb drivers and troubleshooted with Kies).
I keep the phone in download mode while I am trying to connect it to my pc since I can't boot into anything (I have a yellow triangle and Samsung logo if I don't go into download mode).
On my laptop (win 7) I've managed to get windows to install all the drivers(even though it failed a couple times ?), I've also troubleshooted with Kies, still Kies can't connect to it.
I want to restore it to stock ROM but I haven't been successful. First Odin gave me "setup connection" error but then I rebooted the pc and it "worked".
Now it just says complete (write) operation failed.
I've tried 3 different Odin versions, nothing.
What bothers me is that Odin says "Added !" but everyone online to the people with similar issue says that they should reinstall drivers or talks about USB Debugging (which I can't turn on or off since it's bricked).
Sorry for the long post but what's the move here? Am I using a bad ROM ? I've tried one for the country I live in but not the country from which the phone is ( I don't know the country, might be Austria), could this be the issue ?
Thanks in advance!
Update, I may have found the right ROM, now it's stuck at boot.bin
EDIT: Found a youtube "solution" to that, then it got stuck at cache.img
EDIT: Getting Driver issues again, Unknown Device :/