[Q] Rooting stock ATT 4.0.3 [Resolved] - AT&T Samsung Galaxy S II SGH-I777

I figured this will be asked before long. I read some of the long thread on upping to stock 4.0.3 but didn't see any definitive answers.
Here is my situation. I've had my phone for six months on stock 2.3.6 using Entropy's rooted package. Honestly, right now I don't want to run any custom ROMs. I may run CM9 once a final version comes out, but I don't want to bother with the nightly builds. I haven't had any problems with the stock firmware.
So, the other day I lost my phone. Fortunately I had an upgrade, so I got another SGS2. I again loaded Entropy's rooted package, and then upgraded to stock ICS from there. Everything went fine with the upgrade, but I lost root (not surprised). Is there any way currently to root 4.0.3 and keep the stock kernel and ROM?
I mainly want root to enable wifi tethering, which I tend to use often.

At this time, I don't know of any way to root the stock UCLE5 without replacing the kernel.
Sent from my SGH-I777 using xda app-developers app

Ok, thanks for that. Apparently FoxFi enables wifi tethering without root. I'm sure someone will have a rooted package soon. I look forward to a final CM9 release.

creepyncrawly said:
At this time, I don't know of any way to root the stock UCLE5 without replacing the kernel.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
If you're already rooted, couldn't you just use Mobile Odin to flash the stock UCLE5 package with everroot?
Sent from my SGH-I777 using xda premium

You could go back to entropy's rooted GB package and then do as mattdm suggests...havent tried it though.
I have rooted stock LE5 with LE5 kernel but it does involve flashing the SGH-I777CWM recovery kernel, temporarily flashing a 3.x.x kernel to get root injected to the LE5 system, then some file manipulation/repackaging to include the LE5 zimage and flash again, and then pushing the recovery .img (or use rom manager app) to make it all happen...not a simple process if you've never done it but in my case it was worth it.

erad1 said:
You could go back to entropy's rooted GB package and then do as mattdm suggests...havent tried it though.
I have rooted stock LE5 with LE5 kernel but it does involve flashing the SGH-I777CWM recovery kernel, temporarily flashing a 3.x.x kernel to get root injected to the LE5 system, then some file manipulation/repackaging to include the LE5 zimage and flash again, and then pushing the recovery .img (or use rom manager app) to make it all happen...not a simple process if you've never done it but in my case it was worth it.
Click to expand...
Click to collapse
Yeah...I'd choose Mobile Odin over that mess.
Sent from my SGH-I777 using xda premium

hey it's not that much really..and if you've already flashed LE5 and set it up, going back to stock takes a few steps in and of itself. This is just a well thought out, calculated, then executed process not some "mess" as you refer to. So...if you're bold enough to use more than three brain cells...including the ones that tell you to show some couth when you post! ...
then by all means use them and try your own method to root...as I have.
Medical science has proven that the need for utilizing fully cognizant brain function early and regularly will prevent onset of Alzheimer's....I'm just saying'.
Sent from my SAMSUNG-SGH-I777 using xda premium

If you just need root, not need recovery or other kernel, use this:
http://forum.xda-developers.com/showpost.php?p=27743115&postcount=1
If you need to use recovery, use other kernel like Siyah or Entropy

Related

[Q] Rooting ATT SGSII with firmware 2.3.6 broke wifi

I just got a SGSII from ATT. When I started it up, it upgraded the firmware to 2.3.6. Not realizing that this firmware JUST came out, I went ahead and rooted my phone via galaxys2root.com.
The phone is now rooted, but WIFI no longer works. I now see (when adding 2.3.6 to the google search) that that rom is currently a bit problematic with root.
Besides waiting until everyone figures out how to root 2.3.6, what are my other options? Can I revert back to an older (2.3.5) rom somehow?
I am leaving on a trip tomorrow and just need to get wifi working in the short term (in other words it is okay if I dont have root right now).
Thanks!
There is a simple way but a bit time consuming
see this thread
http://forum.xda-developers.com/showthread.php?t=1311081
From the above thread, Use Entropy's return to root stock (method 2c) and follow the instructions which will let you return to stock with root.
Once you have done that, get FOTA update to 2.3.6. Wifi will work and you will still be rooted!
This is what I have done after my wifi stopped working..
Try this and let us know!
EDIT: Before starting the process, do a factory reset or wipe data and cache just to clean every mess!
aspitzer said:
I just got a SGSII from ATT. When I started it up, it upgraded the firmware to 2.3.6. Not realizing that this firmware JUST came out, I went ahead and rooted my phone via galaxys2root.com.
The phone is now rooted, but WIFI no longer works. I now see (when adding 2.3.6 to the google search) that that rom is currently a bit problematic with root.
Besides waiting until everyone figures out how to root 2.3.6, what are my other options? Can I revert back to an older (2.3.5) rom somehow?
I am leaving on a trip tomorrow and just need to get wifi working in the short term (in other words it is okay if I dont have root right now).
Thanks!
Click to expand...
Click to collapse
There are multiple rooting methods, I don't know which one you used. It sounds like you used the custom kernel method.
Flash the stock kernel, OR there's a slight possibility that the update for my kernel I'm putting out tonight might fix things. It's untested and I'm busy prepping for the holidays.
Checked the site you posted, and it looks like you rooted by installing the zedomax kernel. You could install just the UCKH7 stock kernel and you would retain root, and you might get your wifi back. You can find the Odin flashable tar here. Or you can wait and see if Entropy512 posts his latest release of his daily driver kernel tonight, and flash that with ClockworkMod Recovery, which you have in the zedomax kernel.
The stock kernel is the original release, not the update, but it should work fine. But once you flash it, you will no longer have ClockworkMod Recovery, and you'll have to change kernels with a different tool.
this is how I fixed it
I reverted back to a stock rom with this this. Just download a file, untarred it and applied it (on a linux box)... yay!
http://forum.xda-developers.com/showthread.php?t=1313659
creepyncrawly said:
Checked the site you posted, and it looks like you rooted by installing the zedomax kernel. You could install just the UCKH7 stock kernel and you would retain root, and you might get your wifi back. You can find the Odin flashable tar here. Or you can wait and see if Entropy512 posts his latest release of his daily driver kernel tonight, and flash that with ClockworkMod Recovery, which you have in the zedomax kernel.
The stock kernel is the original release, not the update, but it should work fine. But once you flash it, you will no longer have ClockworkMod Recovery, and you'll have to change kernels with a different tool.
Click to expand...
Click to collapse
Fairly certain the UCKH7 kernel will have the same wifi issues as custom kernels... The KK6 stock kernel is harder to find but it's floating around.
No luck so far
I'm having the same problem. So I tried the UCKH7 kernel and wifi is still hosed. I'm looking for the KK6 stock kernel to try it but so far I haven't been able to find it.
At least one person has said that the initramfs changes in Daily Driver 12/21 fixed it.
Not surprised UCKH7 stock failed... If it worked then a custom kernel based on it would've worked.
Hi,
I have the same problem, I rooted my i777 samsumg galaxy 2 with the custom kernel method by using the ZedomaxStock kernel. The wifi is not working now...
Is there any way, I can have it rooted and with the wifi working?. Can I just flash the kernel with the 12/12/2011 Entropy's kernel?
Entropy, could you send me a link to the driver...
Thanks a lot
koskito1 said:
Hi,
I have the same problem, I rooted my i777 samsumg galaxy 2 with the custom kernel method by using the ZedomaxStock kernel. The wifi is not working now...
Is there any way, I can have it rooted and with the wifi working?. Can I just flash the kernel with the 12/12/2011 Entropy's kernel?
Entropy, could you send me a link to the driver...
Thanks a lot
Click to expand...
Click to collapse
Here is the stock UCKK6 kernel in an Odin flashable tar. Just pulled it last night and will be putting it in the Download Repository. This should get the wifi working, but it does not have CWM recovery.
uckk6_kernel.tar
Or, if you want to use Entropy's daily driver kernel, you must use the latest one dated 12/21/2011.
I just flashed it with the uckk6 kernel and the wifi is working again.
Thanks a lot for the file
I can say that if you use entropys return to stock with rood and do the ota update after that you will still have root and working wifi, its what I did the other night.
Sent from my A500 using xda premium
I have flashed the uckk6 kernel, and all the other stock kernels and I still don't have working wifi. Any help?
Thanks,
-Jake
ACCUSED24 said:
I have flashed the uckk6 kernel, and all the other stock kernels and I still don't have working wifi. Any help?
Thanks,
-Jake
Click to expand...
Click to collapse
Have you done a factory reset from CWM? That worked for me.
Sent from my SGH-I777 using XDA App
dandrumheller said:
Have you done a factory reset from CWM? That worked for me.
Sent from my SGH-I777 using XDA App
Click to expand...
Click to collapse
I just did it a second time and now it is working but I don't know if I messed something else up now.. I can't flash a new rom. I am trying to install Unnamed rom. Keeps aborting.

Zedomax Kernal disabled wifi

I recently rooted my Samsung Galaxy S IISGH-I777 from stock using Zedomax kernel. Now wireless won't enable. The last thing I did was back it up. Everything else appears to work.
Grendel2317 said:
I recently rooted my Samsung Galaxy S IISGH-I777 from stock using Zedomax kernel. Now wireless won't enable. The last thing I did was back it up. Everything else appears to work.
Click to expand...
Click to collapse
Flash to Entropys kernel and that will clear it up...Zedomax's stuff isn't worth your time, it hasn't been supported in forever and is very unstable
You can find the files in this thread:
http://forum.xda-developers.com/showthread.php?t=1289460
If you are running a UCKK6 build stay at 12/8 build kernel, KH7 or a I900 GB port can use the newer kernels
Not sure what I can do
yoderk said:
You can find the files in this thread:
http://forum.xda-developers.com/showthread.php?t=1289460
If you are running a UCKK6 build stay at 12/8 build kernel, KH7 or a I900 GB port can use the newer kernels
Click to expand...
Click to collapse
I followed those instructions. First 12/8 is not longer available, or at least I couldn't find it anywhere under that thread. To make the long story short, I'm now sitting on Kernel version 2.6.35.7, Baseband I777UCKH7.
I used the 3/7 kernel from Entropy and flashed it with Mobile Odin Lite.
Wifi will still not stay on.
I do have clockwork recovery, (even Rom Manager Premium but I know not to use it) and haven't done anything with it.
Are there radio or modem drivers I need to flash or something?
Don't use ROM manager on this phone. It will break it.
As far as the main issue is concerned. You could always attempt a return to stock. There's forum topics with more detail in the adroid developement section.
Grendel2317 said:
I followed those instructions. First 12/8 is not longer available, or at least I couldn't find it anywhere under that thread. To make the long story short, I'm now sitting on Kernel version 2.6.35.7, Baseband I777UCKH7.
I used the 3/7 kernel from Entropy and flashed it with Mobile Odin Lite.
Wifi will still not stay on.
I do have clockwork recovery, (even Rom Manager Premium but I know not to use it) and haven't done anything with it.
Are there radio or modem drivers I need to flash or something?
Click to expand...
Click to collapse
The problem is 2.3.6 stock wifi gets broken when rooted. If you just wanted to root I believe you need to flash the 2.3.4 return to stock rooted file system package in the general sticky. If you don't want to stay stock just flash your new rom. I reccomend aokp 4.0.4 from the dev thread. Its bad ass. Either way your wifi will return once you flash the new rom. Flash it using cwm. Just read the return to stock thread all the info about the 2.3.6 wifi break is in there.
Sent from my SGH-I777 using xda premium
I've heard talk that you have to do a factory data wipe/reset in CWM after flashing a rooted kernel that includes CWM. Don't know why but it worked for me. You loose your stuff but you retain root and you get to use your wifi.
When that happened to me I wiped data, system, cache etc., then I flashed a rom from clockwork. That solved it for me.
Sent from my SGH-I777 using XDA

What kernels to use for ICS roms

Hi I'm new to using Samsung phones, always had Moto. Is Entropys ZombieAss kernel the only kernel that I can flash ICS(new official ICS ROM ect.) roms on with CWM, or are there more? I'm unrooted on stock 2.3.4, any help would be appreciated, thanks.
Sent from my SAMSUNG-SGH-I777 using xda premium
RPK925 said:
Hi I'm new to using Samsung phones, always had Moto. Is Entropys ZombieAss kernel the only kernel that I can flash ICS(new official ICS ROM ect.) roms on with CWM, or are there more? I'm unrooted on stock 2.3.4, any help would be appreciated, thanks.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
You can flash almost any ROM with almost any kernel, but ZombieAss will boot and run recent i9100 based ROMs. As in, you can't use ZombieAss with the official ICS ROMs from AT&T. If you're on stock 2.3.4, you can go ahead and flash any ICS ROM from their threads as long as it's for our phone -- the i777. They should automagically flash an ICS kernel.
In short, use ICS kernels with ICS roms, Gingerbread kernels with Gingerbread roms, but any kernel with CWM can flash anything without trouble.
Just pick your ROM and go in my opinion! pretty much all of the ICS ROMs include a kernel that will include CWM. (exception being the ATT leaks, but i believe even the one built by Task650 includes a kernel with CWM)
Kernel for ICS ROMs
I use overclocked kernels by SebastianFM on Android Revolution HD ROMs. Combination of the two works best for me.
You can also check out faux123's released kernels. Also very nice work (with ZRAM)
StyxCrosser said:
I use overclocked kernels by SebastianFM on Android Revolution HD ROMs. Combination of the two works best for me.
You can also check out faux123's released kernels. Also very nice work (with ZRAM)
Click to expand...
Click to collapse
Think you might be lost .. Everything you referenced was for the HTC Sensation.
To the OP,, do not flash sensation things! I'd assume they'd fail to install anyways,, but if they didn't,, you might be in for fun!
Yeah man, I'm on HTC. That's what happens when you're a noob.
Didn't even think about ALL OTHER DEVICES.
Thanks anyway
StyxCrosser said:
Yeah man, I'm on HTC. That's what happens when you're a noob.
Didn't even think about ALL OTHER DEVICES.
Thanks anyway
Click to expand...
Click to collapse
lol it happens . Just was worried the OP would try to flash some HTC stuff!
shishir95 said:
You can flash almost any ROM with almost any kernel, but ZombieAss will boot and run recent i9100 based ROMs. As in, you can't use ZombieAss with the official ICS ROMs from AT&T. If you're on stock 2.3.4, you can go ahead and flash any ICS ROM from their threads as long as it's for our phone -- the i777. They should automagically flash an ICS kernel.
In short, use ICS kernels with ICS roms, Gingerbread kernels with Gingerbread roms, but any kernel with CWM can flash anything without trouble.
Click to expand...
Click to collapse
Just to be sure though, first I have to flash a kernel with Odin that has CWM, then flash a ROM directly from internal/external sd? Or. Can I just flash a any ROM with Odin? . Just don't want to mess up and have to use the return to stock method. Thanks
Sent from my SAMSUNG-SGH-I777 using xda premium
RPK925 said:
Just to be sure though, first I have to flash a kernel with Odin that has CWM, then flash a ROM directly from internal/external sd? Or. Can I just flash a any ROM with Odin? . Just don't want to mess up and have to use the return to stock method. Thanks
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Once you have CWM (any CWM), you can go pretty much anywhere without returning to stock.
People that complain about bootloops didn't know the most basic rule of flashing:
ALWAYS WIPE DATA IN CWM WHEN SWITCHING FIRMWARES! (usually no wiping needed when switching kernels though.)
Suggested order, in my opinion:
Flash a Gingerbread kernel with CWM, such as my Daily Driver for Gingerbread
Do a Nandroid backup of your current setup (Backup and Restore in CWM) - Enter CWM using the three-finger combo, NOT via ROM Manager
Once you've done a backup - flash something. If it's in these forums, it should be safe. I suggest reading the threads for various releases to get a feel for things. Don't ask what's best - that is a matter of taste.
Entropy512 said:
Once you have CWM (any CWM), you can go pretty much anywhere without returning to stock.
People that complain about bootloops didn't know the most basic rule of flashing:
ALWAYS WIPE DATA IN CWM WHEN SWITCHING FIRMWARES! (usually no wiping needed when switching kernels though.)
Suggested order, in my opinion:
Flash a Gingerbread kernel with CWM, such as my Daily Driver for Gingerbread
Do a Nandroid backup of your current setup (Backup and Restore in CWM) - Enter CWM using the three-finger combo, NOT via ROM Manager
Once you've done a backup - flash something. If it's in these forums, it should be safe. I suggest reading the threads for various releases to get a feel for things. Don't ask what's best - that is a matter of taste.
Click to expand...
Click to collapse
Thanks for help. Can I flash your daily driver with Odin since I don't have CWM yet? I downloaded the current version and it is a .zip, not a .tar file. Thanks
Sent from my SAMSUNG-SGH-I777 using xda premium
RPK925 said:
Thanks for help. Can I flash your daily driver with Odin since I don't have CWM yet? I downloaded the current version and it is a .zip, not a .tar file. Thanks
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
DON'T use Odin from your computer! Using Odin trips the flash counter and that'll probably give you headaches later. Use Mobile Odin instead, you can find it here under Step 3a, it allows you to flash zip files (lite version is free, allows you to flash only kernels from the phone itself)
karate104 said:
DON'T use Odin from your computer! Using Odin trips the flash counter and that'll probably give you headaches later. Use Mobile Odin instead, you can find it here under Step 3a, it allows you to flash zip files (lite version is free, allows you to flash only kernels from the phone itself)
Click to expand...
Click to collapse
I'm not rooted yet though. Any suggestions.
Sent from my SAMSUNG-SGH-I777 using xda premium
RPK925 said:
I'm not rooted yet though. Any suggestions.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Read same thread. Steps 2a-d detail four different ways to root. I think you would do well to read the thread's OP in it's entirety a few times before you try anything.
Sent from my GT-I9100 using XDA
There is one tar ball available for Entropy's daily driver kernel. It's the top one in the list of downloads, named DD_01232012.tar. If you flash it, you will increment the flash counter and invoke the yellow warning triangle on boot, but you can reset the flash counter and remove the yellow triangle with a usb jig, or if you install ICS on the phone, you can get the same result using chainfire's Triangle Away application. And by all means, read the full OP of my guides, and any other follow up information you can find, so that you will have a solid foundation for making decisions as you go forward.
RPK925 said:
Thanks for help. Can I flash your daily driver with Odin since I don't have CWM yet? I downloaded the current version and it is a .zip, not a .tar file. Thanks
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Right now only my Gingerbread kernels have a .tar download available.
It is my opinion that no one should be going straight to ICS yet without already having some experience with kernel flashing/installing CWM/nandroiding their current Gingerbread firmware as a backup/properly testing custom firmwares, which is why only my Gingerbread kernels have .tar files. ICS on our devices is still too new.
karate104 said:
DON'T use Odin from your computer! Using Odin trips the flash counter and that'll probably give you headaches later. Use Mobile Odin instead, you can find it here under Step 3a, it allows you to flash zip files (lite version is free, allows you to flash only kernels from the phone itself)
Click to expand...
Click to collapse
Triangle Away will reset that on ICS.
Entropy, I've been wondering. Does your ZA Kernel work on the AOKP roms that Task has been porting over to our phones?
i dont think ZombieAss will work with non-Sammy based ROMs, but I haven't tried it
Entropy512 said:
Right now only my Gingerbread kernels have a .tar download available.
It is my opinion that no one should be going straight to ICS yet without already having some experience with kernel flashing/installing CWM/nandroiding their current Gingerbread firmware as a backup/properly testing custom firmwares, which is why only my Gingerbread kernels have .tar files. ICS on our devices is still too new.
Triangle Away will reset that on ICS.
Click to expand...
Click to collapse
Thanks for all the help. I actually downloaded mobile odin, then used doomlords easy rooting tool, then flashed, I forgot the name but it was something like "one kernel to rule the all", flashed with mobile odin, and got CWM, then installed you current daily driver, made a Nandroid backup, and now I'm ready to flash. I had one more question, what is the difference between the regular Nandroid backup and the advanced? And should I be backing up regular, or the advanced way?
Sent from my SAMSUNG-SGH-I777 using xda premium
shoestar said:
Entropy, I've been wondering. Does your ZA Kernel work on the AOKP roms that Task has been porting over to our phones?
Click to expand...
Click to collapse
No go, I tried and it wouldn't boot
Sent from my SGH-I777 using Tapatalk

New to i777, please help

Just moved from iPhone to i777, wanted to get ICS, but eneded up bricking my first phone by installing something meant for i9000. At that time I didn’t know Galaxy S2 has variants, just searched for S2 and got burned. My fault…..should have understood better.
I want to do it right this time so I have been reading about i777, ROMs, kernels, CWM.
I want to put SHOStock or CM9 ROM.
I know where these ROMs are and how to flash them using CWM.
But that’s where my confusion starts, that there are just too many sources and options and I don’t know which one is right.
So please advise.
How do I root?
Using this? It has multiple options
http://forum.xda-developers.com/showthread.php?p=18576627#post18576627
or this ?
http://galaxys2root.com/galaxy-s2-root/how-to-root-att-galaxy-s2-sgh-i777/
Which kernel to use
The one mentioned in SHOStock thread #3 post the Cherry Picker Kernel for i777 or Entorpy? Siayh
How do I get CWM on these, isn’t recovery part of the kernel or do I flash It separately or may be use ROM Manager, once rooted.
Modem? What does it do? Is it for phone or wi-fi and how do I know which one to use.
My phone’s data
SGH-i777
Android 2.3.6
Baseband I777UCKK6
Kernel 2.6.35.7
Build#
GINGERBREAD.UCKK6
Here's what you need to do:
1. Use Odin to flash stock UCKH7 with Root, available here. Be aware that doing this will require a full wipe, so do what you can to back up your sms/mms/contacts and other data. READ EVERY STEP CAREFULLY. Do not flash a kernel with Odin.
2. Now that you have root access, download Mobile Odin from the Play Store. Use it to flash either Entropy's DD or Siyah. This will install CWM Recovery.
3. Boot into CWM Recovery and make a nandroid backup.
4. Use CWM to flash SHOStock or CM9.
First of all thanks for responding.......
Is there a relation between which ROM will work with which Kernel, I may be wrong but I got the impression, depending on which ROM you are putting, you should have a kernel that supports it.
Also it seems like, ShoStock has its own variation of entropy, named cherry picker.
Thanks.......
mattdm said:
Here's what you need to do:
1. Use Odin to flash stock UCKH7 with Root, available here. Be aware that doing this will require a full wipe, so do what you can to back up your sms/mms/contacts and other data. READ EVERY STEP CAREFULLY. Do not flash a kernel with Odin.
2. Now that you have root access, download Mobile Odin from the Play Store. Use it to flash either Entropy's DD or Siyah. This will install CWM Recovery.
3. Boot into CWM Recovery and make a nandroid backup.
4. Use CWM to flash SHOStock or CM9.
Click to expand...
Click to collapse
Agree with matts post just like to add that you can get the free mobile odin here http://forum.xda-developers.com/showthread.php?t=1347899 to flash the kernel so you dont spend any money. download file, extract, move apk to sdcard, use root or file explorer locate and run the apk. follow instructions on flashing a kernel
Thanks a ton got it.....
aj9507 said:
Agree with matts post just like to add that you can get the free mobile odin here http://forum.xda-developers.com/showthread.php?t=1347899 to flash the kernel so you dont spend any money. download file, extract, move apk to sdcard, use root or file explorer locate and run the apk. follow instructions on flashing a kernel
Click to expand...
Click to collapse
Ah yes, thanks. I always forget to mention that.
Itsme1967 said:
First of all thanks for responding.......
Is there a relation between which ROM will work with which Kernel, I may be wrong but I got the impression, depending on which ROM you are putting, you should have a kernel that supports it.
Also it seems like, ShoStock has its own variation of entropy, named cherry picker.
Thanks.......
Click to expand...
Click to collapse
Sometimes there is, but it seems like most of the ICS kernels are interchangeable. Just try out each kernel for a few days...once you have CWM, switching kernels is no big deal. When switching kernels, though, it's always wise to flash jivy's Kernel Cleaning Script just before flashing a new kernel.
Can you use CWM to flash kernels as well ? I thought they always have to be done using ODIN.
May be I underestimated CWM, I thought it was for ROMs and zips only.
Itsme1967 said:
Can you use CWM to flash kernels as well ? I thought they always have to be done using ODIN.
May be I underestimated CWM, I thought it was for ROMs and zips only.
Click to expand...
Click to collapse
u can use mobile odin or cwm but its just a matter of preference you just had to use mobile odin at first to acquire a cwm enabled kernel but pretty much you can flash everything in cwm as long as its specified to be cwm flashable zip kernels roms and modems and such
edit: the free mobile odin only lets you flash kernels btw its the premium version that lets you do everything without going to recovery
hope to help
Itsme1967 said:
Can you use CWM to flash kernels as well ? I thought they always have to be done using ODIN.
May be I underestimated CWM, I thought it was for ROMs and zips only.
Click to expand...
Click to collapse
You don't seem to have a firm grasp on all this. Maybe you should do some more reading before going further...
Anyway, here's a brief explanation:
A kernel is the underlying core of the operating system; it is how the OS interacts with the hardware.
A rom (the proper term is actually firmware, but nobody uses it) is basically the whole user interface; it's the part of the OS you see. When you flash a rom, you're flashing everything, including a kernel.
Like I said before, you never want to flash a custom kernel using Odin. Doing so will trip the phone's flash counter, and this will show up if you ever have to take the phone in for warranty stuff.
The reason it's ok to use Odin to flash the stock with root package is that it comes with the stock kernel, not a custom one. Basically, once you're rooted, you shouldn't touch Odin again unless its to recover from a brick. Basically everything else can be done in CWM.
Yes I am still reading & trying to get a grip on it.
So first I will root it, then flash kernel using Mobil Odin
Then get in CWM mode ad flash ROM, which will come with the kernel i.e. cherrypicker kernel and modem I need.
Yes one part I have understood very well is that use CWM as much as one can to avoid committing mistakes by flashing something that doesn't belong.
Sorry for asking so many qs., I wish I could understand this faster.....
Thanks again........
Itsme1967 said:
Yes I am still reading & trying to get a grip on it.
So first I will root it, then flash kernel using Mobil Odin
Then get in CWM mode ad flash ROM, which will come with the kernel i.e. cherrypicker kernel and modem I need.
Yes one part I have understood very well is that use CWM as much as one can to avoid committing mistakes by flashing something that doesn't belong.
Sorry for asking so many qs., I wish I could understand this faster.....
Thanks again........
Click to expand...
Click to collapse
Yeah no problem. I would suggest that you wait a while before doing this. Read through all the stickies and guides to can find, and get more familiar with everything. Then after a couple days, go for it.
Crap, I'm starting to think I should not but a sg2....
Sent from my HTC Glacier using XDA
rpomponio said:
Crap, I'm starting to think I should not but a sg2....
Sent from my HTC Glacier using XDA
Click to expand...
Click to collapse
Why?
I remember my first flash....
Sent from my SGH-I777 using xda premium
jthatch12 said:
I remember my first flash....
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I remember mine, read and re read the guides 3 to 5 times before I even touched my phone that I had for only three hours before I got bored with stock lol. To op don't be afraid man this forum is here to help and the gs2 is a great phone
Sent from my SGH-I777 using XDA
:*) nice ! Love these kinds of threads.
mattdm said:
Why?
Click to expand...
Click to collapse
Can you send me a guide please, I have been reading for a couple days now and alot of what I see is wifi breaks after root. I am buying a sg2 in about 2 weeks so plan on seeing me around. I want to root it and run ics but I need my wifi... Any help is greatly appreciated!! Thank you in advance!!!
Sent from my HTC Glacier using XDA
rpomponio said:
Can you send me a guide please, I have been reading for a couple days now and alot of what I see is wifi breaks after root. I am buying a sg2 in about 2 weeks so plan on seeing me around. I want to root it and run ics but I need my wifi... Any help is greatly appreciated!! Thank you in advance!!!
Sent from my HTC Glacier using XDA
Click to expand...
Click to collapse
Wifi works fine on ics
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Nick281051 said:
Wifi works fine on ics
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
So I just need to go threw the root process, make a back up, and when I flash the ics ROM I choose, my wifi will be back?? Sorry for the noobish questions, I plan on rooting my sg2 as soon as I get home from buying it and I don't want to brick it... Any help is much appreciated!!! Thank you in advance!
Sent from my HTC Glacier using XDA
rpomponio said:
Can you send me a guide please, I have been reading for a couple days now and alot of what I see is wifi breaks after root. I am buying a sg2 in about 2 weeks so plan on seeing me around. I want to root it and run ics but I need my wifi... Any help is greatly appreciated!! Thank you in advance!!!
Click to expand...
Click to collapse
mattdm said:
Here's what you need to do:
1. Use Odin to flash stock UCKH7 with Root, available here. Be aware that doing this will require a full wipe, so do what you can to back up your sms/mms/contacts and other data. READ EVERY STEP CAREFULLY. Do not flash a kernel with Odin.
2. Now that you have root access, download Mobile Odin from the Play Store. Use it to flash either Entropy's DD or Siyah. This will install CWM Recovery.
3. Boot into CWM Recovery and make a nandroid backup.
4. Use CWM to flash SHOStock or CM9.
Click to expand...
Click to collapse
You don't need any more of a guide than that. Don't worry about breaking wifi, that isn't a problem on any of the popular roms.
If you want a Samsung based ICS rom that works really well, I suggest ShoStock2. If you want an AOSP based rom, most people suggest AOKP. I haven't tried it personally.
rpomponio said:
So I just need to go threw the root process, make a back up, and when I flash the ics ROM I choose, my wifi will be back??
Click to expand...
Click to collapse
You're wifi won't go away in the first place.

[Q] i777 Rooted with stock ATT OTA 4.0.4 compatible kernel with CWM Recovery

Before I go into flashing kernel I have a question to ask. Which kernel that is compatible to the att 4.0.4? Just want to make sure before I flash it through Odin Mobile Lite.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Are you wanting a kernel to use in place of the stock one for everyday use? Or are you wanting a kernel with CWM to flash a new ROM?
Sent from my SGH-I777 using xda premium
Red_81 said:
Are you wanting a kernel to use in place of the stock one for everyday use? Or are you wanting a kernel with CWM to flash a new ROM?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
With CWM to flash a new ROM that also compatible for stock one. If any.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Your best bet is the Siyah kernel.
http://forum.xda-developers.com/showthread.php?t=1592228
You should be able to flash this zip in mobile Odin.
Sent from my SGH-I777 using xda premium
Thanks. I'll try it.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I just noticed you said lite. Lite won't flash the zip. You will need to unzip the zimage file first.
Sent from my SGH-I777 using xda premium
Thanks again.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
help please
I have an i777 that absolutely refuses to allow CWM. I have tried Siyah kernel on both GB and ICS stock roms, as well as AJK kernel on JB stock from. I am far from giving up but this has caused me so much headache and I've never bricked a phone as much as I've done this. Needless to say, I've learned a lot but I have yet to figure it out. If anyone could offer some advice or things to try I certainly would appreciate it.
I am currently running stock 4.0.3 with Siyah 4.3.3 kernel.
travis.hamra said:
I have an i777 that absolutely refuses to allow CWM. I have tried Siyah kernel on both GB and ICS stock roms, as well as AJK kernel on JB stock from. I am far from giving up but this has caused me so much headache and I've never bricked a phone as much as I've done this. Needless to say, I've learned a lot but I have yet to figure it out. If anyone could offer some advice or things to try I certainly would appreciate it.
I am currently running stock 4.0.3 with Siyah 4.3.3 kernel.
Click to expand...
Click to collapse
Assuming your phone is in fully working condition, then there is evidently something you are missing in your understanding of how the phone works. The SGH-I777 is different in that the recovery is built in to the kernel, and *not* installed separately in it's own partition. From reading the above, I'm wondering if your are trying to install a separate recovery, or if you art trying to install ClockworkMod from the play store by installing Rom Manager?
To help you get through this, I need to know exactly what you are doing that is not working for you, in a step by step explanation.
Thank you for your reply. I had feared this was a dead thread.
I am aware that custom recovery is embedded in the kernels themselves and not a standalone as I have encountered with my Hercules.
As for what I have tried. From manager from play store will flash 100% but never give me a complete notice which, I believe, is a successful download but not flash.
As far as kernels are concerned. I have used ones that are compatable with stock rooms. I've tried a couple that don't. All have failed to yield me with my desired result.
Is there a piece of code that I can modify to get the kernel embeded recovery to kill stock Sammy?
travis.hamra said:
Thank you for your reply. I had feared this was a dead thread.
Click to expand...
Click to collapse
The phone is pretty old, and not many people hang out here any more. I still check in every once in a while. You would get more attention in any forum if you post a new thread with your question, rather than necro-ing an old thread.
I am aware that custom recovery is embedded in the kernels themselves and not a standalone as I have encountered with my Hercules.
As for what I have tried. From manager from play store will flash 100% but never give me a complete notice which, I believe, is a successful download but not flash.
Click to expand...
Click to collapse
I assume you meant to type "Rom" manager? Rom manager should not be used on the I777. For reference, see the very top sticky thread in the Q&A forum (this forum) [A] Rom Manager ******WARNING READ THIS BEFORE******
As far as kernels are concerned. I have used ones that are compatable with stock rooms. I've tried a couple that don't. All have failed to yield me with my desired result.
Click to expand...
Click to collapse
All custom kernels built for the I777 come with a recovery either based on CWM recovery or TWRP recovery. These kernels are usually compatible with the stock system which matches their version number. Once you install the custom kernel to replace the stock kernel, you will be able to enter recovery and it will be CWM (or TWRP in a few cases).
For Gingerbread, you can do this without rooting the device, since there is a Siyah kernel for Gingerbread that is available in tar format that can be flashed with Odin. To do this, flash the I777UCKH7 full distribution, which you can download from the Download Repository (see the link in my signature), then flash the tar version of Siyah 2.6.14 Kernel. Flash each one in PDA. Without ticking Re-Partitioning. You will now be able to boot into recovery and you will have CWM recovery where you can flash many types of custom firmware.
Another route you could take is to flash the I777UCMD8 full distribution from the Download Repository, then use the Framaroot app with the Aragorn exploit to root the device, and then use Mobile Odin Pro, or Mobile Odin lite to flash the AJK v4.9 NoSwap kernel which is compatible with the stock system. If you need additional instructions on how to do that, just ask.
Is there a piece of code that I can modify to get the kernel embeded recovery to kill stock Sammy?
Click to expand...
Click to collapse

Categories

Resources