Hi guys, im new to Samsung Note i717 but not Android. I have a ATT i717 and im having issues with the signals on the phone. My sim and network is good in my Galaxy Nexus but not in the Note. Now im in Canada and it is a ATT phone. I did get it unlocked today. Whatever SIM i put in the signal on the top right cycles from no service to 3-4 grey bars, during bars if I try to make a call i get the message "Mobile network not available". It loops from the ghost buster sign to signals.
I opened Kies and it shows me I have PDA:LA1/PHONE/LA2/CSC:LA1(ATT). I did restore using ATT stock from http://forum.xda-developers.com/showthread.php?t=1506330 so far there is no difference.
At present im downloading another stock ATT rom from h**p://stockroms.net/file/GalaxyNote/SGH-i717/attstockrom.zip
to test if that works. size diff between both roms.
It acts the same without a SIM aswell ... weird
Thanks for the help.
You don't have an APN configured.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No the APN are there and enabled.
Are you trying to connect to Wind?
If so, you will news to visit the thread about T-Mobile compatible modems. I think the current favorite is a blaze modem:
http://forum.xda-developers.com/showthread.php?p=24422331
I am not. Trying to connect to bell or rogers.
Also I cant get past Settings>Wireless and Networks>Mobile Networks>Network Operators at this point Default setup is greyed out.
I'm stuck with this device, don't know what could be wrong with it.
Check about phone>baseband. It sounds like you're missing the modem.
baseband version i717mugla2.
also im trying to follow http://forum.xda-developers.com/showthread.php?t=1506212 and push the att radio to the phone. got it rooted and all but i keep getting "failed to copy 'amss.bin' to '/tmp/amss.bin': Read-only file system" error.
i did adb remount but still same thing
If I were you I would flash the latest at&t modem ULCF5. To flash it you do it from CWM recovery, then reboot, and bam! Good to go.
Download the modem here in the first post:
http://forum.xda-developers.com/showthread.php?p=27863509
The adb instructions given in the thread you last referred to were before CWM was ported to our note. The easiest and surest way is CWM.
The Canada carriers use the same frequencies as at&t,except Wind, which is T-Mobile.
Modems are silicon chips and you have to flash (rewrite the software in the chip). Copying or pushing files won't do the job of rewriting the chip's software. Using CWM is a safe way to do it. Using Odin software on your PC is another safe way.
I tried using ODIN to push the ATT radio file from http://forum.xda-developers.com/showthread.php?t=1506212 it failed halfway, i wanted to try adb as I have struggled in the past with it.
Didnt want to try CWM but I guess that might be the best way at present.
If you had trouble with Odin, adb will be a real tough way to go.
In general, modding your phone is at present best accomplished with CWM.
rangercaptain said:
If you had trouble with Odin, adb will be a real tough way to go.
In general, modding your phone is at present best accomplished with CWM.
Click to expand...
Click to collapse
got CWN and installed Electron_UCLF5_Modem.zip, but same thing, what am i doing wrong?
Good job so far. Hang in there!
Do you have bars or a circle?
Which carrier, Bell or Rogers? APN's is different
Rogers APN:
Bell APN:
I have a bell note myself and I recently flashed one of the CM9 Roms.. I think after I flashed the UCL5 rom my sim card would no longer be detected at all. Tried 4 sim cards no luck. Restored from Odin Using the BELL Pit, CSC, etc... no luck. Back to the factory for repair for me. Good luck!
Sent from my Transformer Prime TF201 using XDA
rangercaptain said:
Good job so far. Hang in there!
Do you have bars or a circle?
Which carrier, Bell or Rogers? APN's is different
Click to expand...
Click to collapse
i have the circle, followed by grey bars, circle, its back and forth, i cant make calls when i get the bars, even no sim give me the grey bars.... ?!?!:crying:
ok since it was just rangercaptain who tried to help me out.
This is what I have tried so far.
I installed T-Mobs modem, Bell modem and att modem, but my note will not register to any network.
The funny thing is that it says ATT on the top front screen but I717M in the back behind the battery, does all of your ATT notes say the same or I717 only.
I did open the whole phone up to see if i can fix the antenna, saw some tags for i717 in there.
Could someone be able to grab hold of UCLA1 radio, i have tried UCLA3 but that didnt do the trick.
And if someone else knows the solution to my problem which i havent thought of yet please let me know, I cant return this phone, im stuck with it.
Thanks for reading.
hello try factory reset and then when the phone boot up try to falsh the Blaze Modem if they dont work try another rom but always do factory reset after instaling the modem i had hard time with some rom's and modem but now the note work good with 4/5 mb download speed good luck
soulkillla said:
Could someone be able to grab hold of UCLA1 radio, i have tried UCLA3 but that didnt do the trick.
Click to expand...
Click to collapse
Link to UCLA1 modem:
http://bayfiles.com/file/7HcB/a4RxaF/A01_ATT_Modem_CWM_CLA1.zip
Boot into CWM recovery and flash this zip.
moussa11 said:
hello try factory reset and then when the phone boot up try to falsh the Blaze Modem if they dont work try another rom but always do factory reset after instaling the modem i had hard time with some rom's and modem but now the note work good with 4/5 mb download speed good luck
Click to expand...
Click to collapse
Thanks for replying, what is the blaze modem and where can i find the right one.
First post in this thread:
http://forum.xda-developers.com/showthread.php?p=24422331
You can Google. Its part of your apprenticeship, young Jedi.
Related
Hi everyone!
Well, I live in SouthAmerica (Argentina), and I bought an unlocked AT&T Atrix 4G a couple of months ago.
When I was on the stock Gingerbread Firmware, the GPS worked Fine. But when I unlocked the phone, and started playing with ROMs, the gps stopped working.
Currently I have CM7 Weekly #4, but i previously had: Wet Dream V1.3, CM7 Ba2TF, CM7 Weekly #3, and the issue was present on all of that roms.
I tryed with the proper gps.conf configuration for my country, and a lot more, and none of them worked or improved anything. I also tryed with the following apps: Faster Fix, GPS FIx, GPS Status, and again, none of them worked.
So, I was wondering (If there isn't any other solution): Can I go back to the Official AT&T Gingerbread Firmware (.SBF file), or I will brick my phone?
If so, anyone knows where can I find that SBF? Because all the links I saw were on Megaupload, Filesonic, Fileserve, or similar, and all of them are down, or restricting the download.
Help will be highly appreciated!
cletus8 said:
Hi everyone!
Well, I live in SouthAmerica (Argentina), and I bought an unlocked AT&T Atrix 4G a couple of months ago.
When I was on the stock Gingerbread Firmware, the GPS worked Fine. But when I unlocked the phone, and started playing with ROMs, the gps stopped working.
Currently I have CM7 Weekly #4, but i previously had: Wet Dream V1.3, CM7 Ba2TF, CM7 Weekly #3, and the issue was present on all of that roms.
I tryed with the proper gps.conf configuration for my country, and a lot more, and none of them worked or improved anything. I also tryed with the following apps: Faster Fix, GPS FIx, GPS Status, and again, none of them worked.
So, I was wondering (If there isn't any other solution): Can I go back to the Official AT&T Gingerbread Firmware (.SBF file), or I will brick my phone?
If so, anyone knows where can I find that SBF? Because all the links I saw were on Megaupload, Filesonic, Fileserve, or similar, and all of them are down, or restricting the download.
Help will be highly appreciated!
Click to expand...
Click to collapse
flash a stock rom SBF file using RSD Lite should be fine. But don't go back to Froyo, any Gingerbread stock roms should be ok.
Well, i installed the SBF, and now the GPS works perfectly...
Why It doesnt work in custom Roms?
cletus8 said:
Well, i installed the SBF, and now the GPS works perfectly...
Why It doesnt work in custom Roms?
Click to expand...
Click to collapse
Hi,
Could you please try Neutrino V2. 1p rom?
There is a gps tweak in add-on.
First, flash the rom and test the GPS.
Then if it work, flash the add-on.
But for me it's another problem, it's really strange...
Do you full wipe (with fastboot) before flash?
Let me know by PM, I will not follow this thread carefully.
We will found a solution ;-)
Regards
-JFK-
I have the same problem and tried everything like the posted said above.
Running Cyanogen 7.1 on AT&T (USA)
Wish I could be more helpful, but I can at least confirm that the GPS works fine for me running cm7 weekly #6 with faux123's 1.3 kernel (on an AT&T Atrix). In flight mode (i.e., no data and thus no A-GPS or other location assistance) I can get a lock in less than 10 seconds with a good view of the sky.
I do not know if you tried reflashing your radio as discussed in the atrix-dev-team faq:
code.google.com/p/atrix-dev-team/wiki/FAQ
You say you have tried various firmwares but didn't mention what kernels you were using. If you are using the stock kernels, the faux123 or Clemsyn kernels might be worth a shot . . . obviously you need to flash the right kernel (i.e., if you are using a cm7 firmware, use the custom kernels specifically built for cm7).
If you already tried all this, well, sorry . . . give -JFK-'s suggestion a try.
tc1999 said:
I have the same problem and tried everything like the posted said above.
Running Cyanogen 7.1 on AT&T (USA)
Click to expand...
Click to collapse
I tried the Neutrino ROM GPS fix, it worked amazingly. My phone was taking forever to lock, so I flashed the United_States.zip file from the GPS fix, and it solved my problem. Used GPSFix app from the Market/Play Store to finalize it.
I'm running Ba2TF Beta 3 (CM7.1).
Again, this file is only for the United States Atrixes.
had the same problem with the phone since first day i started using custom roms,
but i managed to solve it a few days ago..... what i did was
go here
http://forum.xda-developers.com/showthread.php?t=1252011
and download the 3.x Google Specific CWM Flashable build there
or just click this direct link http://derekgordon.com/gps-files/agps.patch.google.build.cwm.v3.1.zip
flash it with CWM,
then using root explorer, go to your phone system\etc\
and open gps.conf with text editor,
with in the first few lines, u will see this
NTP_SERVER=ntp.derekgordon.com
Click to expand...
Click to collapse
there is only one NTP server,
so go to http://www.pool.ntp.org/en/
and under active servers, select your sub-continent and u will some ntp server addresses, add that to your gps.conf.
than go into your country specific link and add the ntp server addresses u found there into the gps.conf file as well.
if you follow those steps correctly, your NTP server list for gps.conf should look like this for Argentina
NTP_SERVER=ntp.derekgordon.com
NTP_SERVER=0.ar.pool.ntp.org
NTP_SERVER=1.ar.pool.ntp.org
NTP_SERVER=2.ar.pool.ntp.org
NTP_SERVER=3.ar.pool.ntp.org
NTP_SERVER=0.south-america.pool.ntp.org
NTP_SERVER=1.south-america.pool.ntp.org
NTP_SERVER=2.south-america.pool.ntp.org
NTP_SERVER=3.south-america.pool.ntp.org
Click to expand...
Click to collapse
now go stand somewhere with open sky as sometimes buildings block the gps signal so it can't get a proper lock,
cross your fingers and activate your gps and hope it works....
and don't forget to leave the gps open a few mins for the first time you activate the gps after the above steps
as i remember reading somewhere in the AGPS original post that it kinda help the gps locks faster.....
if u are geeky and wanna know how many sats ur GPS is locking on,
download this neat GPS tool https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5lY2xpcHNpbS5ncHNzdGF0dXMyIl0
and see for yourself and while you are at it, u might wanna calibrate your compass for faster and more accurate GPS lock,
which can b done from (menu button)\tools\compass calibration
might as well do the 'calibrate pitch and roll' too,
but don't touch the 'manage A-GPS state' unless u know what u are doing as i have no idea what it does...
if you really wanna know how AGPS works, just go read it's original post here
http://forum.xda-developers.com/showthread.php?t=1252011
cause i dunno how it works, i just know that my gps works after flashing and tweaking it
I have also been reading that switching radios can help the gps signal lock. Might be worth your time to look into it as well.
I had this issue just the other day and i just had a setting unchecked were it wasnt useing the interal gps for the lock not sure how that happend but it fixed my problem
Pbwizkid said:
I had this issue just the other day and i just had a setting unchecked were it wasnt useing the interal gps for the lock not sure how that happend but it fixed my problem
Click to expand...
Click to collapse
Thanks.
I looked at this. I've since switched to Neutrino but same problem.
In my settings it provides the option to use internal GPS (as the only option) but even when selected the GPS source states ""use external bluetooth gps..."
Could this be the issue, that for some reason it's not detecting GPS hardware?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi I have a GT-i9300 that worked well over a month, after a hard reset I can do anything but when I'm on a call I have no audio either in or out.
I have checked with skype and viber and the hardware is fine. Also I have tried several firmwares (official and custom) and several modems and I still have the same issue.
I cannot apply my warranty since the phone was purchased overseas, please help me on how to fix this.
I am posting this on android development since it is more likely that some developer know how to solve this, also the thread on Q&A is dead. I apology if this is now the correct forum to post it.
Please help me to get my Galaxy back :crying:
dsv591 said:
I am posting this on android development since it is more likely that some developer know how to solve this, also the thread on Q&A is dead. I apology if this is now the correct forum to post it.
Please help me to get my Galaxy back :crying:
Click to expand...
Click to collapse
1. Relax, it's a common issue nothing to worry about and it can be easily resolved.
2. I understand that you are panicking but development is not a right place for it. In future you may post in q&a section.
3. Are you rooted and have you played with modems lately?
☞ sent from GS3 or Nexus
ceo.mtcl said:
1. Relax, it's a common issue nothing to worry about and it can be easily resolved.
2. I understand that you are panicking but development is not a right place for it. In future you may post in q&a section.
3. Are you rooted and have you played with modems lately?
☞ sent from GS3 or Nexus
Click to expand...
Click to collapse
Thanks for the reply
Right now I'm on the original FW again, but yes, I was rooted and tried at least 8 different modems.
Any suggestion?
Moved to Q/A, questions don't go in the development section.
I had the same symptons after updating stock firmware. Both speaker and earpiece worked fine but not in a cell phone call. You should try and let the connection to the other side last long enough and see if your cellphone modem resets like in my youtube video.
http://www.youtube.com/watch?v=fo46OXWEcX0
If it is like in the video than you're out of luck because with me it was an hardware error. Samsung service center could not repair that, the send it to samsung HQ. After I got it back it stated that a hardware part was replaced under warranty.
Any suggestions apart from above ones?
Sent from my GT-I9300 using xda app-developers app
dsv591 said:
Any suggestions apart from above ones?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I saw your pm now.
If you are familiar with rooting... Root again.
And perform full wipe, install latest check rom v4. It is LG8 firmware and comes with modem.
Then share this screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That should fix your issue. Let us know if you have tried this out and it did not fix the issue.
☞ sent from GS3 or Nexus
I just fixed it by installing the latest version of an official software from UK. It started failing like before, but after 5 minutes or so it fixed by itself. Don't know why exactly, and I'd really like an explanation so I can know how this happened exactly, but has been working for over 15 hours with no issues (reboots included).
Of course I don't want to wipe again or try another software at the moment, because I don't want everything to happen again, but if someone can really tell why this happens and why it started working alone this will help a lot to know how to reverse it in case it happens again.
Thanks everyone here
dsv591 said:
I just fixed it by installing the latest version of an official software from UK. It started failing like before, but after 5 minutes or so it fixed by itself. Don't know why exactly, and I'd really like an explanation so I can know how this happened exactly, but has been working for over 15 hours with no issues (reboots included).
Of course I don't want to wipe again or try another software at the moment, because I don't want everything to happen again, but if someone can really tell why this happens and why it started working alone this will help a lot to know how to reverse it in case it happens again.
Thanks everyone here
Click to expand...
Click to collapse
Did you obtain fw trough kies? I got the same problem
I got it from samfirmware.com. however today it stopped working again for no reason... could a simple hard reset damage the hardware??? I think it's silly but I can't come up with another explanation.
Tomorrow I will try the firmware told 3 posts above and post the results. In the meantime I'm trying to find an answer of why it stopped working again...
This is frustrating, I'm located in Costa Rica and Samsung states I can only apply by warranty in Germany... so I guess I'm by myself and all of you guys trying to resolve this
Sent from my GT-I9300 using xda app-developers app
Still the same issue, here is the screenshot after the full wipe and software installation.
Please advise
Hi guys. Has anyone come with a solution to this problem? I'm facing the same issue as the OP.
I was running on stock firmware, then flashed the leaked JB firmware and rooted it again. Then flashed the stock firmware again. Once I did that, I started having this problem.
Any sort of help would be appreciated.
Thanks.
Sent from my GT-I9300 using Tapatalk 2
Similar problem. I can solve it by full wipe but when I restore application data with MyBackup Pro or in CWR nandroid backup, I lost sound in call.
It begun after flashing leaked JB ROM, then flashing original ROM via ODIN and now on CM10.
Advice?
Maybe modem problem. Try to flash different modems. http://forum.xda-developers.com/showthread.php?t=1740061
fallenwout said:
I had the same symptons after updating stock firmware. Both speaker and earpiece worked fine but not in a cell phone call. You should try and let the connection to the other side last long enough and see if your cellphone modem resets like in my youtube video.
http://www.youtube.com/watch?v=fo46OXWEcX0
If it is like in the video than you're out of luck because with me it was an hardware error. Samsung service center could not repair that, the send it to samsung HQ. After I got it back it stated that a hardware part was replaced under warranty.
Click to expand...
Click to collapse
I'm having the EXACT same issue. Everything else works fine. It came out of the blue. Last thing I was running was Omega 13.1 with Siyah Kernel 1.5.3. I've had the phone for about 3 or 4 months, then about 4 days ago it started happening out of the blue. I tried flashing and wiping anything and everything you can imagine, including stock firmware. Sometimes it would work for a few calls, then back to square one. Yesterday I went to a stock firmware, then restored my Omega nandroid and it worked fine until I rebooted. I have no idea what's causing this issue and it's really pissing me off. It seems common with no fix.
I live in the US and this phone is originally from Vodafone UK, bought through Amazon sim-unlocked (real SIM unlocked, not via any app). Samsung UK is asking me for the ROM info I'm on, which I can get by flashing a stock ROM (CSC, Baseband, etc), but they're also asking me for a UK address, which is troubling.
Here's every ICS modem ever for the i9300 (not by me): https://www.wuala.com/UpInTheAir/SGS3/Modems/I9300/ICS/?key=n0KVwtIMZPE8
JB leak back to stock ICS
libb said:
Similar problem. I can solve it by full wipe but when I restore application data with MyBackup Pro or in CWR nandroid backup, I lost sound in call.
It begun after flashing leaked JB ROM, then flashing original ROM via ODIN and now on CM10.
Advice?
Click to expand...
Click to collapse
Have the same problem. Flashed the leaked JB and now then went back to stock ICS (Meteor Ireland) from sammobile.com. Still no luck. I'm flashing every modem I can find but still no audio at all. I had some issues with the JB leak that calls sometimes (more than not) didnt work but then a reset would usually solve it.
Anyone have any ideas what else can be done?
I've read it's hardware failure and that Samsung will fix it. However if you live in a region where the phone isn't sold and you imported it through Amazon, Negri, etc, you need to contact the original seller, because Samsung won't touch it if you send it to them directly.
Have you tried wiping cache and fixing permissions? I've had lots of sound issues on JB, all went away after flashing omega 25, no problems now either on omega 27
Also try flashing the modem again, clear cache/fix perms,
Sent via TCP/IP
Full wipe will always be an answer. However, restoring application can bring the problem again. If you want to backup the contacts just use the export to usb storage in the settings instead of using backup apps in restoring. Also try to perform fix permission.
BelJanss said:
Full wipe will always be an answer. However, restoring application can bring the problem again. If you want to backup the contacts just use the export to usb storage in the settings instead of using backup apps in restoring. Also try to perform fix permission.
Click to expand...
Click to collapse
Issue occurs even before installing the applications. Seems to be something related to the modem firmware, however each modem behaves differently but with the same issue
Sent from my GT-I9300 using xda app-developers app
Hello
I have investigated the problem for one week and found a solution for me
The Problem is the short distance of the Bluetooth audio transmission!
There are two settings file for the BCM4334 WIFI BLUETOOTH IC and it seems that it depends on the phone which is better.
For me it sadly was not the common used for CM10 nightly!
So i build two CWM files for you to test the differences.
Maybe we can find out on what it depend
I bought my S3 in Austria (the carrieris H3G) and for me bcm4334_semcosh works fine!
greetings
Patrick
Hi Patrick
So. I had i fine working BT audio streaming with cm 10. Then Changed to cm10.1. BT-connection was crap.
Flashed both of your files.
Aaaaaand: tataaa. the second one seems to work for me.
Thanx a lot!
so you are able to establish a audio-stream-connection longer than 1m?
This works for me! Used the second zip file listed (bcm4334_semcosh.zip) and it did the trick. Tried streaming some music from about 5m from the receiver, no problems at all! Thanks OP!
On CM10 I had excellend bluetooth audio streaming up to +/- 6 metre, on CM10.1 audio is (just) ok with max distance +/- 1 metre.
For who want to know, the Samsung bluetooth firmware files (bcm4334*) wrapped in the two packages in the first post are also in the CM 10.1 rom, see screenshot or browse to /system/bin/
Seems like the murata version is installed by default by CM 10.1.
I did a manual copy, rename and a reboot to try both files (e.g. to try the murata version, copy bcm4334_murata.hcd to bcm4334.hcd).
Both files give me the same performance I had already, sound is ok and max distance still +/- 1 metre.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you so much for your help. Finally I am able to use cm10.1 on my SGS3. Also for me the bcm4334_semcosh fixed the problem. I can leave my Phone in my pocket while driving.
New problem:
But now I have the problem that when i have had a call in the car I have no sound coming out the speaker when I get called or receive mail for example. The phone needs a reboot to get sound back. Cm10.1 b.t.w. Am I the only one?
pknoe3lh said:
Hello
I have investigated the problem for one week and found a solution for me
...
Patrick
Click to expand...
Click to collapse
Worked for me (semcosh), thanks so much!
Not working for me...
CM10.1 with Siyah kernel: I can't pair device. It actually asks for PIN, but no answer...
Any help, please?
gpvecchi said:
Not working for me...
CM10.1 with Siyah kernel: I can't pair device. It actually asks for PIN, but no answer...
Any help, please?
Click to expand...
Click to collapse
Try the stock CM10.1 kernel. I had the same problem, and not installing Siyah kernel fixed it for me.
Beardy
semcosh solve it for me audio Bluetooth works like a charm with Cyanogenmod 10.1. Thanks!
Hi there!
I'm on CM 10 on my SGS 3 too and have the problem of not being able to pair with my car's radio.
The two files didn't help, still can't pair.. it simply gets stuck at "Pairing.." in the Settings app.
I'm also using an austrian SGS3 (unlocked) with Siyah kernel and CM 10..
Any suggestions?
Greetings from another Patrik
fold93 said:
Hi there!
I'm on CM 10 on my SGS 3 too and have the problem of not being able to pair with my car's radio.
The two files didn't help, still can't pair.. it simply gets stuck at "Pairing.." in the Settings app.
I'm also using an austrian SGS3 (unlocked) with Siyah kernel and CM 10..
Any suggestions?
Greetings from another Patrik
Click to expand...
Click to collapse
Try stock cm kernel.
Click thanks if I've helped. Sent from my GT-I9300 using xda premium.
Thanks for reply!
Is there a way of getting it after flashing cm 10 or do i just have to reflash it?
Greetings
fold93 said:
Thanks for reply!
Is there a way of getting it after flashing cm 10 or do i just have to reflash it?
Greetings
Click to expand...
Click to collapse
Re-flash it without wiping worked for me.
Click thanks if I've helped. Sent from my GT-I9300 using xda premium.
No Cell Data
I'm using Galaxy S3 Verizon with cm-10.1-20130121-EXPERIMENTAL-d2vzw-M1
I flashed both of these files using ClockWork Mod. Neither helped my performance. I still have very poor Bluetooth A2DP audio and it will cut out after about a minute of playing.
The bigger issue I'm having is that I now get zero cell phone reception. I can't make calls, send texts, or use cell data. Wifi, GPS, and bluetooth all work. I had the phone in airplane mode when I flashed the first file, but I'm thinking that wouldn't have affected it.
Any ideas on how to get back to the original bcm4334 file?
Thanks
alongcor said:
I'm using Galaxy S3 Verizon with cm-10.1-20130121-EXPERIMENTAL-d2vzw-M1
I flashed both of these files using ClockWork Mod. Neither helped my performance. I still have very poor Bluetooth A2DP audio and it will cut out after about a minute of playing.
The bigger issue I'm having is that I now get zero cell phone reception. I can't make calls, send texts, or use cell data. Wifi, GPS, and bluetooth all work. I had the phone in airplane mode when I flashed the first file, but I'm thinking that wouldn't have affected it.
Any ideas on how to get back to the original bcm4334 file?
Thanks
Click to expand...
Click to collapse
just flash the custom rom again and the file will be overridden
pknoe3lh said:
just flash the custom rom again and the file will be overridden
Click to expand...
Click to collapse
Thanks for the reply. I actually did that and after the reboot I still don't have cell service. I even backed up all my apps and settings with Titanium. Wiped all user data and wiped cache, then flashed again. After doing the initial setup after the reboot, I still don't have cell service. I'm going to try to flash a different version of CM10.1, one of the nightly's and see if that helps any. I wish I would have done a full backup with CWM before flashing that bluetooth file
alongcor said:
Thanks for the reply. I actually did that and after the reboot I still don't have cell service. I even backed up all my apps and settings with Titanium. Wiped all user data and wiped cache, then flashed again. After doing the initial setup after the reboot, I still don't have cell service. I'm going to try to flash a different version of CM10.1, one of the nightly's and see if that helps any. I wish I would have done a full backup with CWM before flashing that bluetooth file
Click to expand...
Click to collapse
hm
yes a full wipe dont help
but if you flash CM again it is for sure overridden!
So your problem have another source.
I would guess you had flashed an other radio rom (CM dont come with Radio so new flashing has no effect on radio rom)
Also call problems are independent of the bluetooth hardware ...
I would recommend you to flash the orginal rom again and then rood again and then again flash CM but be careful as flashing is risky
greetings Patrick
Yeah I'm starting to think it was a just a coincidence that it stopped working when it did. From other threads I've found the best bet will be to indeed flash back to stock ROM and then back to CM. I'm downloading the stock ROM now found here:
http://forum.xda-developers.com/showthread.php?t=1762204
The only thing I did was flashed that semcosh.zip file using CWM though, so I'm not sure how that would have affected my radio.
Good thing it's a slow day in the office! Also, I think I'm just going to use wired headphones from now on!
---------- Post added at 03:31 PM ---------- Previous post was at 02:37 PM ----------
Just an update. I downloaded that root66.tar and flashed it with Odin. Did a full data wipe after (because it was stuck on the Verizon 4g splash screen). Still didn't have cell connection. Then did the step 2 on this page:
http://forum.xda-developers.com/showpost.php?p=35600769&postcount=2
Open the dialer and enter *2767*3855#
After it did some other sort of factory reset, I finally have cell connection again. And all before I leave work for the day.
Same issue here
Planet X said:
Thank you so much for youthe latest version available todayr help. Finally I am able to use cm10.1 on my SGS3. Also for me the bcm4334_semcosh fixed the problem. I can leave my Phone in my pocket while driving.
New problem:
But now I have the problem that when i have had a call in the car I have no sound coming out the speaker when I get called or receive mail for example. The phone needs a reboot to get sound back. Cm10.1 b.t.w. Am I the only one?
Click to expand...
Click to collapse
I have the same problem as you. When I disconnect from the car, all notification sounds are lost, BUT I've realized that you don't need to reboot. If you recieve a call to your phone (no email, sms or whatsapp, only a call will do the trick), it will actually ring and from then on, notifications go back to normal. It's not actually a fix, but until one comes out, it makes this issue a little less a pain in the ass.
Hope this helps. If anyone knows how to fix this for real then help is largely appreciated.
PS. My first custom ROM in S3 was CM10.1 nightly (the latest version available today) so I can't tell what happened before, but except for the mentioned issue and maybe a subtle loss in streaming quality, BT pairs and streams quite alright. Oh, and the media system in my car (Citröen C4) used to show artist and song name while streaming and doesn't anymore.
I bought my phone from a friend and I am the second user. It was rooted and was in modified status (when i checked About->device->status) but working fine and had zero issues. So yesterday i wanted to install a new ROM to get android 4.3 as what i had was android 4.1.2.
I installed this Omega Rom after downloading from omegadroid.co/download-center/ for my S3 I9300, omega version is v58 - XXUGNB6
Now everything is working fine except the calling feature, phone is fast as well but when i try to make a call it says not registered on network.
Which was working Fine before, similarly to another S3 I9300 of a friend the same ROM is installed and it works fine without any problem at all. Even calling is working fine.
The error message is "Not Registered on Network"
What can i do to recover my phone? Can i unroot it ? if so please appreciate any help on how to do it. What could be the issue here if anyone have a idea.
UPDATE
I have found now that IMEI (under the battery) no of the device does not match with the IMEI i get when typing *#06#
The IMEI i get when dial *#06# = 004999010640000 / 01
The IMEI under the battery = 355994/05/8434**/* (* represents rest of the IMEI numbers)
I flashed using ODIN again the ROM at samsung-updates.com/details/24621/Galaxy_S_3_International/GT-I9300/SKZ/I9300XXUGNA8.html which i said to be stock ROM. but its Not the original ROM which was in the mobile before, please find the below screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Still the result is same, I am getting the same response.
Please help me to make phone calls through this mobile,
Appreciate any suggestions and feedbacks. Thanks in advance.
appmonkeydev said:
I bought my phone from a friend and I am the second user. It was rooted and was in modified status (when i checked About->device->status) but working fine and had zero issues. So yesterday i wanted to install a new ROM to get android 4.3 as what i had was android 4.1.2.
I installed this Omega Rom after downloading from omegadroid.co/download-center/ for my S3 I9300, omega version is v58 - XXUGNB6
Now everything is working fine except the calling feature, phone is fast as well but when i try to make a call it says not registered on network.
Which was working Fine before, similarly to another S3 I9300 of a friend the same ROM is installed and it works fine without any problem at all. Even calling is working fine.
The error message is "Not Registered on Network"
What can i do to recover my phone? Can i unroot it ? if so please appreciate any help on how to do it. What could be the issue here if anyone have a idea.
UPDATE
I have found now that IMEI (under the battery) no of the device does not match with the IMEI i get when typing *#06#
The IMEI i get when dial *#06# = 004999010640000 / 01
The IMEI under the battery = 355994/05/8434**/* (* represents rest of the IMEI numbers)
I flashed using ODIN again the ROM at samsung-updates.com/details/24621/Galaxy_S_3_International/GT-I9300/SKZ/I9300XXUGNA8.html which i said to be stock ROM. but its Not the original ROM which was in the mobile before, please find the below screenshot.
Please help me to make phone calls through this mobile,
Appreciate any suggestions and feedbacks. Thanks in advance.
Click to expand...
Click to collapse
Don't panic this as happend to many people when they upgrade from 4.1 to 4.3 roms your efs as changed from efs v1 to efs v2 read this to solve your problem >> http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289 <<
tallman43 said:
Don't panic this as happend to many people when they upgrade from 4.1 to 4.3 roms your efs as changed from efs v1 to efs v2 read this to solve your problem >> http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289 <<
Click to expand...
Click to collapse
Thanks a lot for replying quickly.
Now I tried installing the ROM from samsung-updates.com/details/17288/Galaxy_S_3_International/GT-I9300/SLK/I9300XXEMH4.html
But seems like it has more problem because phone is restarting again and again, never passes the Samsung logo loading screen.
This is how i tried to install the ROM technobezz.com/flash-stock-rom-via-odin-samsung-galaxy-s3/
is it because the ROM is not suitable ? i am wondering why its not coming to start up screen. :-| can you suggest me a ROM please to install my phone information are as in the screenshots posted earlier.
Please help me out and i really appreciate.
Thanks again.
appmonkeydev said:
Thanks a lot for replying quickly.
Now I tried installing the ROM from samsung-updates.com/details/17288/Galaxy_S_3_International/GT-I9300/SLK/I9300XXEMH4.html
But seems like it has more problem because phone is restarting again and again, never passes the Samsung logo loading screen.
This is how i tried to install the ROM technobezz.com/flash-stock-rom-via-odin-samsung-galaxy-s3/
is it because the ROM is not suitable ? i am wondering why its not coming to start up screen. :-| can you suggest me a ROM please to install my phone information are as in the screenshots posted earlier.
Please help me out and i really appreciate.
Thanks again.
Click to expand...
Click to collapse
When you flash any rom boot into recovery after flashing and wipe cache and factory reset this stops the majority of bootloops.
tallman43 said:
When you flash any rom boot into recovery after flashing and wipe cache and factory reset this stops the majority of bootloops.
Click to expand...
Click to collapse
Thank you very much, it worked. rebooting issue is gone. but the IMEI no issue still persist, 004999010640000 / 01
i tried the options in below links
http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289/
http://forum.xda-developers.com/galaxy-s2/general/guide-recover-imei-9-steps-t1264021
its not mentioned how to recover when orginal efs file backup is not taken, this is the problem i have orginal backup was not taken.
is there anyway to create the efs folder structure from the scratch or any software that will generate so? please let me know what i am missing as this is being a very common issue after researching a lot.
or should i consider giving this phone to repair to any Samsung branch?
Thanks in advance.
appmonkeydev said:
Thank you very much, it worked. rebooting issue is gone. but the IMEI no issue still persist, 004999010640000 / 01
i tried the options in below links
http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289/
http://forum.xda-developers.com/galaxy-s2/general/guide-recover-imei-9-steps-t1264021
its not mentioned how to recover when orginal efs file backup is not taken, this is the problem i have orginal backup was not taken.
is there anyway to create the efs folder structure from the scratch or any software that will generate so? please let me know what i am missing as this is being a very common issue after researching a lot.
or should i consider giving this phone to repair to any Samsung branch?
Thanks in advance.
Click to expand...
Click to collapse
Try flashing a patched modem and kernel look at these post's >> http://forum.xda-developers.com/gal...ii-network-problem-update-sn-t1918601/page199 << look at post 1984
Also look at this >>http://forum.xda-developers.com/galaxy-s3/help/guide-emergency-calls-problem-siii-i9300-t2752541 <<
Also here are some patched modems and kernels to try >> https://drive.google.com/folderview...sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8#list <<
About a month ago I had issue with phone stuck on HFA. Several great people offer help to try to fix issue. Could never get problem to go away.. sent to Samsung since Knox was 0x0 and sent same phone back notes said they just flashed software.. I got it and ran good till 2 days ago.. my text wouldn't send. Everything else worked fine.. voice and data and apps.. so did the prl and profile update like sprint asked me to .. then text worked but no data... decided to do factory reset.. then issue was couldn't sign in to google(data not provisioned ).. after talking to sprint and Google they said not sure how to fix it.. only solution that worked was roll back to NAB everything working.. anyone else experience anything like this? Phone out of warranty like 3 days wondering if I should try to get a replacement or is a NC5 software issue
kosmo42o said:
About a month ago I had issue with phone stuck on HFA. Several great people offer help to try to fix issue. Could never get problem to go away.. sent to Samsung since Knox was 0x0 and sent same phone back notes said they just flashed software.. I got it and ran good till 2 days ago.. my text wouldn't send. Everything else worked fine.. voice and data and apps.. so did the prl and profile update like sprint asked me to .. then text worked but no data... decided to do factory reset.. then issue was couldn't sign in to google(data not provisioned ).. after talking to sprint and Google they said not sure how to fix it.. only solution that worked was roll back to NAB everything working.. anyone else experience anything like this? Phone out of warranty like 3 days wondering if I should try to get a replacement or is a NC5 software issue
Click to expand...
Click to collapse
I would ask how's it going but here we are again. Lol I remember that, and have to say NC5 has not had that many issues. So, it ran good for about a month, then would not send a text ? Did Sprint say anything about working on a cell tower ? Nothing was changed, added, or deleted prior to it not working ? Try going to settings/connections/more networks/mobile networks/network mode/ and make sure it is on LTE/CDMA not automatic. Also when you update your PRL you have to completely power down, and then reboot the device for the PRL update to take effect I know it says update successful but that don't mean it has been applied to the device. If you go back to NC5 from NAB again your have update your PRL example : I updated to 4.4.4 today to check and see if Nh7 has a flash counter, which it does, so I went back to 4.4.2 NC5, after about 3 flashes I finally got NC5 back to official status, and than tried to download an app from Google Play it said no connection retry so I updated my PRL and rebooted the device, and my 4G LTE started working again. Where were you when it quit working ? Where you on the road out town ? If you leave town you should update your PRL it is supposed to do it automatically, but doesn't always happen.
Well I was at work and no issues got home and I got a text when I tried to reply it would not send.. I could only receive . So my 1st thought was towers since I had issues with tower close to my house several times.. after asking sprint said network was good my gf. Gs3 had no issues either .. so then tried prl and profile updates that would make my text work but my data would drop.. after a restart text would fail but data worked.. after talking to sprint and google.. ( they blamed it on rooted since they can see what apps u buy) titanium... but after going back to NAB all issues gone.. I am currently back on NC5 did a full un root version and will see. Guessing it's a NC5 issue or hardware
kosmo42o said:
Well I was at work and no issues got home and I got a text when I tried to reply it would not send.. I could only receive . So my 1st thought was towers since I had issues with tower close to my house several times.. after asking sprint said network was good my gf. Gs3 had no issues either .. so then tried prl and profile updates that would make my text work but my data would drop.. after a restart text would fail but data worked.. after talking to sprint and google.. ( they blamed it on rooted since they can see what apps u buy) titanium... but after going back to NAB all issues gone.. I am currently back on NC5 did a full un root version and will see. Guessing it's a NC5 issue or hardware
Click to expand...
Click to collapse
Ok, sounds like software, here is what I would do. Go to micmars here is the link http://forum.xda-developers.com/showthread.php?t=2712205 and get his NC5. Now back up all your data i.e. pics, music, etc. to a ext sd card or PC desktop. Go ahead to do a factory reset. Next with odin on your PC flash a fresh copy of NC5. Now this is the IMPORTANT PART check your download mode screen should look like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Both lines at official status, sometimes you end up custom and official, so if not boot into your stock recovery, and use the device keys and do a factory reset again. Then odin flash a fresh copy of NC5 again. I know it seems like a lot of B.S. but I call it taking out the trash, you need to get back to stock square one. Boot it up see if the issues are gone, if so odin flash a recovery here is the link for Philz CWM 6.12.9 hltespr its bulletproof https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltespr/ then root your device here is the link for SupSu v 1.94 http://download.chainfire.eu/396/SuperSU/ Now if everything is working with no issues, make a backup so you can always restore back to a working OS. Let me know how it goes ?
Will rather stay on NAB or NC5 for little bit more.. warranty runs out in a week if new or old issues happen will root and break Knox to get custom rom.. only reason staying on stock was my warranty.. I was just curious to see if anyone had encounter issues like me.. also upgrading to note 4 in few weeks
kosmo42o said:
Will rather stay on NAB or NC5 for little bit more.. warranty runs out in a week if new or old issues happen will root and break Knox to get custom rom.. only reason staying on stock was my warranty.. I was just curious to see if anyone had encounter issues like me.. also upgrading to note 4 in few weeks
Click to expand...
Click to collapse
Cool, been thinking about an LG G3 myself. Definitely not as many features as Note 4, but more of a pure android OS. The main features of the G3 is no KNOX, little to no bloatware, will run under water, and a removable battery.
Yea wish Samsung would make the bloatware optional.. and Knox also LG3 does look sweet also