Hello : All
Now I'm facing a big problem in my Neo. Last night i want to do upgrade for my phone in ICS 4.0.4.Before upgrading i used with in CWM mode with format cache,format system & format data i done.after formating those, when i used with Flashtool for upgrading my phone, Flashtool cannot flash and and install any rom.
In Flashtool appear "Flashing Error".
But my neo can use and boot with fastboot mode, flash kernel but i can't put or install any rom with 2.3.4 (4.0.2.A 62 or 4.0.4 ICS).
i would like to ask it's depend on when i format with system,cache and data??
Now i can't use my Neo with that problem and please give me idea with what can i fix that problem and what i need to do.
Best Regards,
ppaphyo
ppaphyo said:
Hello : All
Now I'm facing a big problem in my Neo. Last night i want to do upgrade for my phone in ICS 4.0.4.Before upgrading i used with in CWM mode with format cache,format system & format data i done.after formating those, when i used with Flashtool for upgrading my phone, Flashtool cannot flash and and install any rom.
In Flashtool appear "Flashing Error".
But my neo can use and boot with fastboot mode, flash kernel but i can't put or install any rom with 2.3.4 (4.0.2.A 62 or 4.0.4 ICS).
i would like to ask it's depend on when i format with system,cache and data??
Now i can't use my Neo with that problem and please give me idea with what can i fix that problem and what i need to do.
Best Regards,
ppaphyo
Click to expand...
Click to collapse
Are you on locked bootloader?
Post the log from flashtool, when you try to flash your phone.
And edit your subject, since it's not general problem in neo, but in your neo.
Also, from rules
3. Post only using a clear subject and message.
You're most likely to receive a helpful answer to your question if you use a short subject title that describes your problem and a message that explains in detail what your problem is and what you've tried to solve it.
Click to expand...
Click to collapse
Already Fixed
Hello
Thanks for who reply in my thread. Now i already fix this error and this error is Flashtool Software problem and missing driver of SEMC Driver.After i installed Flashtool and installed phone driver from in flashtool Driver folder, upgrading process r all complete.
Now i'm using ICS 4.0.4 Official version but many error in most of the applications r not working. Now i'm facing in Contact, when i edit in contact with what i want to use ringtone in person, that ringtone cannot work.Change in ringtone what i set but when that person call my phone, ringtone is not work.Working in Default Ringtone.
Related
Hi,
I'm new here and i hope my english is not as bad as i think
I've installed the CM7 v21 for mini pro
It works very fine and I'm really satisfied
But I've one big problem
If I use the hardware keyboard, I can't use the touchscreen any more.
I have to reboot the phone, then the touchscreen works without any problem.
When I use the hardware keyboard again, I have the same problem...
Any suggestions?
Please help
Thanks
Kettex
Are there really no suggestions?
Did you make full wipe before flashing rom? What kernel do you use?
First at all thanks for the answer!
Yes I made a full wipe
I use the standard kernel:
kernel-version:
2.6.29
[email protected] #1
kettex said:
First at all thanks for the answer!
Yes I made a full wipe
I use the standard kernel:
kernel-version:
2.6.29
[email protected] #1
Click to expand...
Click to collapse
maybe one more wipe data -after- fresh installing of rom ? hm really don't know
I don't think the problem came up with the new rom, because I also had the problem with another rom (Andread 2.3.5)
I'll try a wipe again
Did you have 2.1.1.A.0.6 kernel and SE firmare before you flashed new ROM?
You need to download flashtool and install it, from this thread download 2.1.1.A.0.6 kernel and lybril files for that kernel. Third file is dual touch module and it's optional if you want dual touch Unzip ftf file and copy to subdirectory firmares of flashtool folder. Unziped lybril files copy to root of sd card.
Tutorial for using flashtool
Now proceed with step by step with steps below:
1. Charge your phone fully before going any further
2. Enter CWM and backup your current ROM
3. Turn off your phone and flash the kernel you downloaded
4. Turn on phone and enter CWM and flash lybril files
5. Turn off phone and repair your phone using PC Companion
6. After this steps turn on the phone, root it, install cwm again, flash new ROM and enjoy.
EDIT: added files to attachments
I'll try this, but all the download links are down
Doesn't work anyway... :-/
SEUS is official removed by Sony Ericsson but don't worry just download latest PC Companion and start your in flashmode (you can see green light in the corner) and go to the support zone and update your phone..Bingo your phone starts like its nothing happen
This post was not really helpful Maya ;-)
I repaired the phone with PC Companion and I flashed the stock rom --> everything was fine
But the problem with the touchscreen and the hardware keyboard even occured at stock rom 2.1 update 1
I followed the steps in the post above, but I got the same problem again and again...
kettex said:
This post was not really helpful Maya ;-)
I repaired the phone with PC Companion and I flashed the stock rom --> everything was fine
But the problem with the touchscreen and the hardware keyboard even occured at stock rom 2.1 update 1
I followed the steps in the post above, but I got the same problem again and again...
Click to expand...
Click to collapse
Maybe you got a hardware problem? some kind of loose connection that gets shorted when you slide the keyboard?
Hi, first i want to say sorry about my english level and thanks to people who reads my post.
I try to flash mi xperia mini pro sk17, with ..058 version of firmware, unlocked bootloader, rooted and with CWM.
Will follow the step by step instruction, and after instalation my phone is stuck on Sony Ericsson screen and nothing happens about 10 minutes and after then i remove the battery and try to enter in CWM and again nothing happens.
Does anyone have the same problem and how you resolve it ?
Thanks in advance for people who help me !
Respect for all XDA members !
Occured same problem, flashed my phone back to stock firmware until I find a solution.
Anyone has one?
ok...i will try to explain....I believe you have installed nAa-r2 CWM? It is defective CWM since it is put in system/ section... hybrom rewrites this section, thus, when you start recovery from system/ and try to install ROM, you try to erase CWM from under CWM....just update your FW to .62, install custom kernel you like and then make all wipes and install zip from sd card)
r06ert0 said:
ok...i will try to explain....I believe you have installed nAa-r2 CWM? It is defective CWM since it is put in system/ section... hybrom rewrites this section, thus, when you start recovery from system/ and try to install ROM, you try to erase CWM from under CWM....just update your FW to .62, install custom kernel you like and then make all wipes and install zip from sd card)
Click to expand...
Click to collapse
Yeah, I think the best way is to update to .62, then install b kernel (made by bbooff himself - unlock bootloader needed) then load Hybrom, then you can install any other kernel you like. But I have problem with X kernel with Hybrom, first one is bootloo and then draining batterry very fast ^^"
tanec said:
I try to flash mi xperia mini pro sk17, with ..058 version of firmware, unlocked bootloader, rooted and with CWM.
Click to expand...
Click to collapse
the rom is based on 0.62 Kernel, upgrade first to 0.62 then try flashing again, i dont know if this makes a difference but its worth a try
I solved my problem and installed Hybrom v12 now.
First, indeed, you need to have unlocked bootloader and .62 firmware, I used WotanClient to flash the firmware. Then I got other kernel, I used http://forum.xda-developers.com/showthread.php?t=1440161 this one.
Then I entered the Clockworkmod Recovery(press power button one-two times, when the screen goes lighter on turning on). Then I followed the instructions from the Hybrom and successfully installed it.
I got WT19i, but should apply the same.
Hi. I'm a newbie on xda and I would be extremely grateful if someone could help me.
I have a problem with my X10i. It used to run stock 2.3.3 Gingerbread with root access and busybox / xRecovery 0.3 already installed. I decided to install DiXperia 7 'Avenger' by DiKeJ (greetings, buddy) on my device using xR. I downloaded the ROM and pasted it directly into my SD card. Then I did all the steps:
-Factory Reset
-Wipe Cache Partition
-Wipe Dalvik Cache
-Wipe Battery Stats
I choosed Install Custom Zip to install DX7. The console displayed few lines of code which I don't remember and this error:
Code:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(Device or resource busy)
E: Can't mount /sdcard
After this my phone freezes on SE logo, I can't run xRecovery, system or even charge my phone. I tried to flash it using Flashtool, but it doesn't recognize my device.
Is there any chance to resurrect my Xperia? I want to use it again, even with the stock ROM?
Greetings
Yes it possible, and impossible to break your device for now - sometimes this problem exist, don't know why, and not only on my ROM - it's possible on all X10, I had it too one time when I wanted to flash Wolfbreak's ROM v4 (old time ). Let's back to your problem - you need to apply again Stock ROM 2.3.3 - install it via SEUS/PcCompanion (or FlashTool, but I suggest official app. If you can't flash via FT, then you need to update your drivers for X10), and then make Root, Busybox, and xRecovery 0.3, I suggest you GB ready (the newest FlashTool have it included all). Then problem should dissapear, without anything. I think it should help. Take care buddy .
DiKeJ I can't remember. Does Your ROM require an unlocked bootloader?
Sent from X10
Use this tool forum.xda-developers.com/showthread.php?t=1415600
Thank you very much, DiKeJ. My X10 has been saved!
But I still want to install DX7. What did I do wrong (or what's wrong with my SD card)? How can I make it work next time?
Anybody care to tell me how to get any of those methods to work? I got my x10 stuck at the SE logo while flashing, and I can't do anything with it. None of the programs can recognize it and it won't boot into recovery.
can you help me my x10i freeze at "Sony Ericsson" after rooting kernel help me please
im from philippines and i don't think we have sony ericsson care here
can you send me in my email? [email protected] please
I guess the best solution to get ride of this issue is to flash the stock full firmware and then do everything from the beginning.
To do that, you should visit this topic : [TOOL/X10] [UPDATE 07/04/2012] Flashtool version 0.6.9.0
Then flash a generic firmware(you choose whatever you like) using flashtool
Once your phone is booted, you can try to mod it as you wish.
If you would like to change the kernel, I advise you to unlock the bootloader : read the topic
Hope this gonna help
DiKeJ said:
Yes it possible, and impossible to break your device for now - sometimes this problem exist, don't know why, and not only on my ROM - it's possible on all X10, I had it too one time when I wanted to flash Wolfbreak's ROM v4 (old time ). Let's back to your problem - you need to apply again Stock ROM 2.3.3 - install it via SEUS/PcCompanion (or FlashTool, but I suggest official app. If you can't flash via FT, then you need to update your drivers for X10), and then make Root, Busybox, and xRecovery 0.3, I suggest you GB ready (the newest FlashTool have it included all). Then problem should dissapear, without anything. I think it should help. Take care buddy .
Click to expand...
Click to collapse
Hi, i have same problem and i try diferent things to make work, and wont work, still Sony Ericsson logo there, i try update service from Sony, any advice? I`m a noob about this.
I try to root the x10 with FlashTool, after that when i try yo flash to update kernel, logo freeze, i wait 10 minute, still freeze.
Can you or someone help me?
Thank you very much!
Edit: I fix the problem, with SEUS and a trick, i plug the usb in phone, press the BACK button, and then put the battery in the phone, and SEUS autodetect my phone, and now is updating.
Repair the phone using SEUS if nothing else give good results
zsec1021 said:
can you help me my x10i freeze at "Sony Ericsson" after rooting kernel help me please
im from philippines and i don't think we have sony ericsson care here
can you send me in my email? [email protected] please
Click to expand...
Click to collapse
It should work in x10i manong, just start from the beginning which you need apply again the stock 2.3.3 ROM from sony ericsson (sony mobile these days) via PC Suite then Root and install busybox and xRecovery 0.3 and the problem is solved. I tried it to my friend's phone which is x10i also, and it works. Just follow the instructions given by DiKeJ and you'll be fine. :good:
I installed CWM for testing a ROM from XDA.
Now I can't connect my device to the PC and it looks like I can't get in flashmode.
PC Companion isn't recognizing my phone.
I tried several cables and charging works - it even prepares the internal storage (notification bar) but I don't see my Xperia P in Explorer and in PC Companion.
It's strange, that the issues came since I installed CWM.
If I uninstalled it, would I get into flashmode or see my device in Explorer? I don't really like the ROM I flashed, I always get force close in several apps.
Also, when I wanted to flash with CWM I made a "X" for backing up my data. Can I restore my system like it was before flash? (While flashing, there were some messages like "backing up" or sth)
And last question: When I flashed CWM I got a message about ROOT, I had to chosse if I want it or not. I choosed yes, but it said "this cannot be undone". I googled and noone posted this ROOT question before. Is this normal?
102 views and noone knows how to do that?
U cant unflash a CWM unless u go back to your stock firmware as CWM comes with different kernels. And the reason why PC and SEUS wont recognize your phone is because you have unlocked it and rooted it with custom kernel. I assume you are using GB coz i faced the internal storage problem with GB stock and the mtp process which is actually stupid of sony. Anywayz, U need to flash the stock firmware again to make those work again plus if you dont want the CWM too. But if you just want to keep your root but no CWM then u got to reflash your stock firmware, go to fastboot mode, flash a stock kernel (GB and ICS have different kernels which u can find over xda), then fastboot your stock kernel again. This procedure will let you keep your root but wont use custom kernels a.k.a CWM. If you are into ICS then u can use the custom kernels coz it wont do any damages or hiccups while u try to connect your phone to PC.
FOR SD CARD MOUNTING OVER GB : SD CARD MOUNTER FOR Xperia S,P,SOLA (GB ONLY)
DOOM KERNEL :DOOMKERNEL ONLY FOR STOCK GB
ADVANCE STOCK KERNEL : ADVANCE STOCK KERNELS FOR ICS
ashqmallik said:
U cant unflash a CWM unless u go back to your stock firmware as CWM comes with different kernels. And the reason why PC and SEUS wont recognize your phone is because you have unlocked it and rooted it. U need to flash the stock firmware again make those work again plus if you dont want the CWM too. But if you just want to keep your root but no CWM then u got to reflash your stock firmware, go to fastboot mode, flash a stock kernel (GB and ICS have different kernels which u can find over xda), then fastboot your stock kernel again. This procedure will let you keep your root but wont use custom kernels a.k.a CWM.
Click to expand...
Click to collapse
Oh yeah thanks! I flashed in fastboot mode and now I can flash in flash mode!
Too bad PC Companion won't flash my device anymore
lesiki said:
Oh yeah thanks! I flashed in fastboot mode and now I can flash in flash mode!
Too bad PC Companion won't flash my device anymore
Click to expand...
Click to collapse
I personally hate PCC. You can always find the latest firmware within hours of its first release, so its pretty easy to get and flash it back using flashtool easily. By the way, do check the links i provided later on my previous comments. Might help you
ashqmallik said:
I personally hate PCC. You can always find the latest firmware within hours of its first release, so its pretty easy to get and flash it back using flashtool easily. By the way, do check the links i provided later on my previous comments. Might help you
Click to expand...
Click to collapse
I liked PC Companion because it doesn't void the guarantee but now it's ok
And thanks for the links, I didn't notice them the first time I read your post
i install knight elf experimental full(kernel) by fastboot.when i close fastboot and turn on my phone dont turn on.work vibrate but not turn on
*my rom is ginger bread
*codename 9.3 eman expria
What kernel look like experimental full 10.1 ??
Please answer my quastion becuse my phone do not turn on ??
I have problem with knight elf kernel
why knight elf experimental full dont work on my neo v
make sure flash the right one.Night-Elf's kernel for GB
Edit : download link is broken.find it elsewhere.i saw it mirrored...dont remember,where it is...
Edit 2 : i searched for you : http://forum.xda-developers.com/showthread.php?t=1468043&page=56
megatpanji said:
make sure flash the right one.Night-Elf's kernel for GB
Edit : download link is broken.find it elsewhere.i saw it mirrored...dont remember,where it is...
Edit 2 : i searched for you : http://forum.xda-developers.com/showthread.php?t=1468043&page=56
Click to expand...
Click to collapse
Thank you for answer
Im sure im flash right kernel
sendspace.com/file/lu3dwc
forum.xda-developers.com/showthread.php?p=21896062
Help plz
7illa said:
Thank you for answer
Im sure im flash right kernel
sendspace.com/file/lu3dwc
forum.xda-developers.com/showthread.php?p=21896062
Click to expand...
Click to collapse
I think you are flash the wrong kernel, the kernel you've flashed is for ICS not for GB..
You may just have soft-bricked your phone, but don't fret . My Neo V was also got stuck on the SONY logo yesterday, after I tried to flash a custom ROM. The phone wouldn't even go into recovery mode. I tried many things to get my phone back up again including flashing the stock kernel, but nothing worked, except repairing it through PC Companion.
If nothing else works, you can try the "Repair" option in Sony PC Companion, which will flash your phone with the latest stock ROM and you will have to root it again (if you want). But BEWARE, all your phone data will be LOST, if not already backed up. If you are wondering where to find the "Repair" option in PC Companion, open the software >> Support Zone >> Update Firmware. On this small window where it asks you to connect your phone, you will see the "repair" option just below on this screen.
You may have done many wrong things, you need to divide kernel issues from rom ones.
Anyway you can set back to stock firmware (rom+kernel) flashing the fw you want with flashtool. Full wipe is a must. If you can't enter cwm right now you will lose your rom-data in order to restore phone.
When you flash a kernel you have to check which android rom it is build for (gb, ics, jb), or your phone will not be able to boot.
Then when you flash a rom you have to make full wipe and follow its instructions.
Of course if you flash whole stock firmware you don't have to worry about the things above.
Don't use PC companion, instead use Sony Update Service. If it refuses to help you, then flash fw manually with flashtool.
Sent from my MT15i using xda app-developers app
flash official .62 rom using flash tool and it'll work
then
flash nightelf GB kernel using fastboot or flashtool
after that reflash your rom