I am unable to get my phone to boot up. I was running resurrection remix fine with no problems, but decided to change ROMS. I did a full wipe and flashed Criskelo ROM through CWM, all looked well, but my phone wouldn't boot. I get the samsung sound and then my phone gets stuck on the Samsung screen. I restored my backup of resurrection remix, but again, my phone wouldn't fully boot. I then decided to flash the original firmware through Odin, which went well also, and passed. But again, my phone wont boot. I know i am using the correct firmware as i have used this firmware before. My phone will charge with no problems, but i cannot get past the Samsung screen. Can anyone help???
mgf8384 said:
I am unable to get my phone to boot up. I was running resurrection remix fine with no problems, but decided to change ROMS. I did a full wipe and flashed Criskelo ROM through CWM, all looked well, but my phone wouldn't boot. I get the samsung sound and then my phone gets stuck on the Samsung screen. I restored my backup of resurrection remix, but again, my phone wouldn't fully boot. I then decided to flash the original firmware through Odin, which went well also, and passed. But again, my phone wont boot. I know i am using the correct firmware as i have used this firmware before. My phone will charge with no problems, but i cannot get past the Samsung screen. Can anyone help???
Click to expand...
Click to collapse
Go into recovery and do data/factory reset and wipe cache and boot up.
gee2012 said:
Go into recovery and do data/factory reset and wipe cache and boot up.
Click to expand...
Click to collapse
You the man.....worked. Thank God...i was s****ing myself. Thanx again!!!
mgf8384 said:
You the man.....worked. Thank God...i was s****ing myself. Thanx again!!!
Click to expand...
Click to collapse
Glad it helped
Hello,
I am new here so I apologize if this has been sked before.
I had cm9 stable version installed on my phone, and it was working fine. On Thursday, I changed my lock pattern as it had no lock on, but I forgot the pattern I put in (I tend to make it complicated) and entered it wrong many times that it asked for my google account and password, but when it got to that point, it started rebooting and it got stuck on the cm robot, and whenever it gets to the google account thing, it goes back to the robot and so on. Then I flashed a stock ICS rom using Odin hoping it would fix the issue, but it got stuck on the glowing s screen. The phone isn't rooted anymore. I tried wiping cache partition but that didn't work. My biggest problem is that I didn't back my phone up and I have important files that I need. Is there a way to fix this issue?
I would really appreciate your help. Thanks!
asjk94 said:
Hello,
I am new here so I apologize if this has been sked before.
I had cm9 stable version installed on my phone, and it was working fine. On Thursday, I changed my lock pattern as it had no lock on, but I forgot the pattern I put in (I tend to make it complicated) and entered it wrong many times that it asked for my google account and password, but when it got to that point, it started rebooting and it got stuck on the cm robot, and whenever it gets to the google account thing, it goes back to the robot and so on. Then I flashed a stock ICS rom using Odin hoping it would fix the issue, but it got stuck on the glowing s screen. The phone isn't rooted anymore. I tried wiping cache partition but that didn't work. My biggest problem is that I didn't back my phone up and I have important files that I need. Is there a way to fix this issue?
I would really appreciate your help. Thanks!
Click to expand...
Click to collapse
If you have CWM installed, you can mount the sdcard in the Mounts and Storage menu, but I don't remember if that sdcard was for internel or external.
Did you try wiping Dalvik cache in Advanced menu (Also CWM)? If you do, wait 5-10min for it to boot up.
Flash Siyah kernel, boot into recovery then mount USB and backup your files.
Then just simply wipe/install the rom zip of your choice.
RhythmHack said:
If you have CWM installed, you can mount the sdcard in the Mounts and Storage menu, but I don't remember if that sdcard was for internel or external.
Did you try wiping Dalvik cache in Advanced menu (Also CWM)? If you do, wait 5-10min for it to boot up.
Click to expand...
Click to collapse
The problem with this is I lost CWM after I flashed the stock ICS rom. It's not rooted anymore
samsung nexus mobile inform about bluetooth
Samsung Neksus Mobile Bluetooth him when I've been in my Bluetooth Paring and does Trnasfer a file from your mobile When the file reaches the Dosre mobile but no files in your mobile when sixth to Resive does not Resive Pljh Suchses Help Me I've ever had in bringing Pljh Help Me kosice But of what I do is I just did a reset two Time
plz help me sir
asjk94 said:
The problem with this is I lost CWM after I flashed the stock ICS rom. It's not rooted anymore
Click to expand...
Click to collapse
boot to stock recovery and perform factory data reset.
You will lose, sms, installed apps etc but all data stored on your internal and external SD will be safe
Swyped from my Samsung Galaxy SII
TheATHEiST said:
Flash Siyah kernel, boot into recovery then mount USB and backup your files.
Then just simply wipe/install the rom zip of your choice.
Click to expand...
Click to collapse
Thank you! I will try that now and let you know if it works.
I have a very strange problem with my Galaxy S II
I was on RR rom and then moved to leaked JB 4.1.2 and stayed on it for months,, A few days age I tried to install Thebyani stock rom which is just an deodexed rom of the official Spain LS8 firmware. when the device boot up after flashing the rom via recovery I had no Lockscreen at all!! and the device restart after long pressing power button and in other instances too.
I was so confused and went back to the leaked LSJ via odin and my problem was that the welcome screen doesn't show up!! I mean the first boot up options. I tried everything possible to reset the device completely and non of them could bring that welcome screen appear. I tried factory reset from recovery with wiping all kind of caches, then I reflashed the LSJ firmware with .pit file and re-partition option and still no welcome screen. I also tries Phzilla kernel to use its option of wiping everything before flashing a rom but nothing happened. The last thing I did was resetting the phone from settings with formatting SD and Internal storage and removing the sim, but of course none of it worked.
I wonder if any one suffered from this problem and what to do whit it!!.
Could you please help? Thanks in advanced.
I have a Galaxy S2 intl version. I was on carbon rom with siyah kernel. All was fine then suddenly it force reboots. but while rebooting it just didn't happen. Nothing happened. The screen logo just flashes for a second and then disappears, and then nothing happens. I tried entering the recovery mode, but doesn't enter the recovery mode. The download mode is working just fine. So I flashed a custom rom with siyah kernel using ODIN, hoping it would help, but nothing seems to happen though both rom and kernel are flashing perfectly alright! Please help me recover my phone guys. Would be extremely grateful, please!
Don't use siyah on custom roms. Flash Dorimanx 9.xx through odin . Recovery should now work. Go into recovery and factory reset clear the caches and reboot. Should work fine after this.
Remember
Dorimanx 8.xx is for stock and custom rom
Dorimanx9.xx is for custom only.
andrewwright said:
Don't use siyah on custom roms. Flash Dorimanx 9.xx through odin . Recovery should now work. Go into recovery and factory reset clear the caches and reboot. Should work fine after this.
Remember
Dorimanx 8.xx is for stock and custom rom
Dorimanx9.xx is for custom only.
Click to expand...
Click to collapse
Okay so I left my phone overnight, with the battery pulled out. I had flashed a stock rom before going to sleep. And i woke up and just put the battery back in to flash Dorimanx, and, something happened. The phone entered recovery mode :cyclops: I had been trying to get in the damn thing for the whole day yesterday, and today it happened, so i did as you said, wiping all that, and rebooted the phone. In a little odd fashion though, but it booted up and the setup process started, and it's working fine now. So, now I'm on a custom rom JB 4.1.2 and siyah kernel. I want a stable 4.3 on my phone. What can I do, sir? I dont wanna run into trouble again, so what would be a safe way?
emviveem said:
Okay so I left my phone overnight, with the battery pulled out. I had flashed a stock rom before going to sleep. And i woke up and just put the battery back in to flash Dorimanx, and, something happened. The phone entered recovery mode :cyclops: I had been trying to get in the damn thing for the whole day yesterday, and today it happened, so i did as you said, wiping all that, and rebooted the phone. In a little odd fashion though, but it booted up and the setup process started, and it's working fine now. So, now I'm on a custom rom JB 4.1.2 and siyah kernel. I want a stable 4.3 on my phone. What can I do, sir? I dont wanna run into trouble again, so what would be a safe way?
Click to expand...
Click to collapse
I am installing the Carbon Rom, JB 4.3 as I already have a copy of it on my phone, and I'm doing it with the same previous kernel on it, ie, Siyah-s2-v5.0.1. Should this create a problem?
Yes it will. DONT USE SIYAH. Use dorimanx 9.xx for any custom rom. Including carbon rom
andrewwright said:
Yes it will. DONT USE SIYAH. Use dorimanx 9.xx for any custom rom. Including carbon rom
Click to expand...
Click to collapse
Okay now I'm really sorry it's starting to bug you but my phone seems to develop new problems every time I reboot. Now, I havent changed anything, On a stock rom with siyah kernel. and i rebooted, and stuck again! I am able to enter recovery mode though (CWM recovery) and download mode also. BUT, now what happens when I boot is, the samsung logo shows with the triangle and, the boot tune plays but there's nothing on the screen, it's just black, and a few secs later, it gives a small vibration, all still with the phone screen black. Later i get to know that my phone has apparently turned on, but the screen is not showing anything. I called my cell and to my surprise it rings meaning its actually ON!! Why is the screen not ON then?? Please help, kind sir! Also if you could provide me with links to the required kernels/roms or whatever else required. Eagerly awaiting your saviour reply! :crying:
You need to go bk to stock with Odin. Test and see if it still happened with fully stock rom and kernel.
andrewwright said:
You need to go bk to stock with Odin. Test and see if it still happened with fully stock rom and kernel.
Click to expand...
Click to collapse
Hey, problem solved now, dont know what it was though! What i did was flash the Carbon rom with siyah, and it booted and then i flashed dorimanx and its working fine now. But the gapps package is reacting weirdly. I flashed it perfectly and when i reboot, it says "Google + stopped working" and then i check the app menu and there's no google apps whatsoever. http://goo.im/gapps/gapps-jb-20130813-signed.zip I then installed play store apk and it opened up and looked fine but then that is all it did! It won't download anything. What shall I do?
Full wipe. So format
Data
System
Preload
Cache
Dalvik cache
Then flash
Rom and gapps
Then flash dori
Then reboot
andrewwright said:
Full wipe. So format
Data
System
Preload
Cache
Dalvik cache
Then flash
Rom and gapps
Then flash dori
Then reboot
Click to expand...
Click to collapse
I did everything! I never got the option to format preload though. Everything else went smooth. Rebooted. Same problem persists.
Go bk to recovery and factory reset. Also maybe if that don't work redownload gapps and try again. May have curupt gapps.
emviveem said:
I did everything! I never got the option to format preload though. Everything else went smooth. Rebooted. Same problem persists.
Click to expand...
Click to collapse
And to top it all off, long pressing the home button refuses to bring up the recent apps/multitasking facility now. The notification bar doesn't work.
What nightly of carbon are you on?
Edit: also format pre load must be there? Mounts and storage. under format system I think.
andrewwright said:
What nightly of carbon are you on?
Edit: also format pre load must be there? Mounts and storage. under format system I think.
Click to expand...
Click to collapse
How do I check to tell which nightly I am on? And the first time I had done the full format, i had preload, and while i foramtted that, it gave me some error saying it couldnt do so. I completed the procedure anyways, availing no success. So, repeated it second time and found no preload option. The recovery menu seems to have changed. Is it a matter of concern? I am on a CWM recovery, apparently. and i found the preload option. tried. it says "Error foramtting /preload" how should i proceed?
Okay this is what I'm using "CARBON-JB-NIGHTLY-20131018-0102-i9100" Please help! I've run into more problems than I had anticipated! I am so worried. What should I do now?
emviveem said:
Okay this is what I'm using "CARBON-JB-NIGHTLY-20131018-0102-i9100" Please help! I've run into more problems than I had anticipated! I am so worried. What should I do now?
Click to expand...
Click to collapse
Sir, please reply. I'm sincerely apologize if I'm coming across as impatient but I'm **** scared. Please tell me how to proceed now..:crying:
Download 11/10 nightly and Dori 9.41.
Preload not formatting is worrying mate. Flash them and get bk to me
Try gapps for jb 4.3. It will surely work.
Sent from my GT-I9100 using xda app-developers app
20130810 is 4.3 isn't it? I'm sure it is.
andrewwright said:
Download 11/10 nightly and Dori 9.41.
Preload not formatting is worrying mate. Flash them and get bk to me
Click to expand...
Click to collapse
I am not able to locate the download links. Could you please do it for me?
Help guys. So my problem is that, my SG3 I9300 is keep on rebooting. It'll just boot to my desktop for about 2-3 seconds then it will reboot again and again. I have to remove my battery for about half an hour and put it back on to reboot successfully. Another thing is that after it reboots successfully, when I use applications like FB / COC it also reboots on its own so as the stock camera application. Apollo is a system app like the camera right? But Apollo works without any problem unlike the camera.
I thought it is a bootloop problem, just like what I've said on my previous post. Sorry for that.
So here are the things I've tried:
1. Flash stock rom (from Sam mobile) thru Odin
2. Delete cache and factory reset in custom recovery
3. Factory reset on TWRP - Wipe everything including Internal sd - Flash Megawipe
4. Flash other custom roms thru TWRP/CWM
5. Flash stock rom thru Kies
The problem still occurs after everything I've done. So please help me
Thanks! :good:
Current rom: cm11 m12
Android version: 4.4.4 KK
Kernel: boeffla 2.7 NG
JohnRod said:
Help guys. So my problem is that, my SG3 I9300 is keep on rebooting. It'll just boot to my desktop for about 2-3 seconds then it will reboot again and again. I have to remove my battery for about half an hour and put it back on to reboot successfully. Another thing is that after it reboots successfully, when I use applications like FB / COC it also reboots on its own so as the stock camera application. Apollo is a system app like the camera right? But Apollo works without any problem unlike the camera.
I thought it is a bootloop problem, just like what I've said on my previous post. Sorry for that.
So here are the things I've tried:
1. Flash stock rom (from Sam mobile) thru Odin
2. Delete cache and factory reset in custom recovery
3. Factory reset on TWRP - Wipe everything including Internal sd - Flash Megawipe
4. Flash other custom roms thru TWRP/CWM
5. Flash stock rom thru Kies
The problem still occurs after everything I've done. So please help me
Thanks! :good:
Current rom: cm11 m12
Android version: 4.4.4 KK
Kernel: boeffla 2.7 NG
Click to expand...
Click to collapse
Try another battery if not it is a faulty power button or other hardware problem. I see you have tried other roms so this rules out a software problem....
tallman43 said:
Try another battery if not it is a faulty power button or other hardware problem. I see you have tried other roms so this rules out a software problem....
Click to expand...
Click to collapse
I'm hoping it is a battery problem alone. I'll note that for now bud, thanks! :good: