hey guys , i have a little problem here, while im not using my phone it sort of heats on the back and automatically turns off , this dont happens while im using it , what can be wrong >? please answer
Have you used apps like SetCPU?
przemcio510 said:
Have you used apps like SetCPU?
Click to expand...
Click to collapse
no sir..
Try to flash another kernel. (and eventually make sure minimal CPU clock is set >= 100 MHz)
przemcio510 said:
Try to flash another kernel. (and eventually make sure minimal CPU clock is set >= 100 MHz)
Click to expand...
Click to collapse
Im using foxhound revolver rom with the foxhound kernel
Sent from my GT-I9100 using xda premium
So, change kernel for Siyah, NEAK, Thoravukk or other. Maybe it should help.
Related
Hi everyone,
I already install Devoid.Franco and his kernel, but i dont know if this kernel has the Touch Fix like Mik_os' kernel touch fix.
I read all the initial post from franco but i cant find any information about it.
thx
it does have the touch fix. but some ppl have problems with tht kernel.
its for u to make the choice
ccdreadcc said:
it does have the touch fix. but some ppl have problems with tht kernel.
its for u to make the choice
Click to expand...
Click to collapse
Thx for your answer but which kernel has the best soluction for the touch bug? some times i still feeling the touch bug.
weird... wats ur overclock value?
im using franokernel v15 and its smooth as butter. absolutely no lags...
ccdreadcc said:
weird... wats ur overclock value?
im using franokernel v15 and its smooth as butter. absolutely no lags...
Click to expand...
Click to collapse
I am using SetCpu and it say 600 mhz, I thought Devoid.Franco was 729, i download No-Frills and set it to 480/729 with SMARTASS, im gonna see what happens now.
thx
interactive 480/768 is also good
ccdreadcc said:
interactive 480/768 is also good
Click to expand...
Click to collapse
Tried it on my optimus one....Screen goes off. Not stable Got stock 2.2.2
Hi, i'm new here and i have the Archos 101 for about 3 months.
I'v tried to OC it a few times using the urukdroid 1.0,1.1, 1.5 and 1.5.1 every time with the suitable OC Kernel of course.
everey time i did it just stuck at boot and i had to recover.
even tried OC manualy using "quickclock advance" but it crashes
when it hits 1100mhz...
I'm now using urukdroid 1.5.1 without OC and it runs great!
But i still want to OC my device.
Any sugestions?
sory for my english, it is not my language.
Sent from my A101IT using xda premium
haimelf said:
Hi, i'm new here and i have the Archos 101 for about 3 months.
I'v tried to OC it a few times using the urukdroid 1.0,1.1, 1.5 and 1.5.1 every time with the suitable OC Kernel of course.
everey time i did it just stuck at boot and i had to recover.
even tried OC manualy using "quickclock advance" but it crashes
when it hits 1100mhz...
I'm now using urukdroid 1.5.1 without OC and it runs great!
But i still want to OC my device.
Any sugestions?
sory for my english, it is not my language.
Sent from my A101IT using xda premium
Click to expand...
Click to collapse
Same for me...
Enviado desde mi A101IT usando Tapatalk
The problem is that every SoC is different, so not everyone can run every frequency with the same vsel.
Some need higher voltage to run.
As we atm have no way to do this on a per maschine base, you have to wait until one of the devs makes a configurable OC kernel.
Hi, I have the same problem and I have already give up the OC...
fzelle said:
The problem is that every SoC is different, so not everyone can run every frequency with the same vsel.
Some need higher voltage to run.
As we atm have no way to do this on a per maschine base, you have to wait until one of the devs makes a configurable OC kernel.
Click to expand...
Click to collapse
isn't there a way to OC manualy with some guide and a proper app
that tested on weak cpu as mine?
haimelf said:
isn't there a way to OC manualy with some guide and a proper app
that tested on weak cpu as mine?
Click to expand...
Click to collapse
you can try this apk http://code.google.com/p/milestone-overclock/downloads/list which allow you to modify the frequency & voltage of the cpu without a custom rom. It needs roots access.
It is working with Archos IT cause it is the same cpu.
I tried it with my IT101, it works great
Doesn't work oob with the A70S, but i patched a version that you can find in the dev thread.
fzelle said:
Doesn't work oob with the A70S, but i patched a version that you can find in the dev thread.
Click to expand...
Click to collapse
can you give me a link please?
i have archos 101 will it work?
I'm using the InParisv4 Rom. Is anyone using SetCPU with this? If so, what overclock setting is working for you?
If you want to overclock, you need an overclockable kernel. Paris v4 uses the stock kernel. Flash Pershoot's kernel and you'll be able to overclock to 1.4ghz.
Don't forget the "thanks" button if this helps you.
Thank you! I already flashed Pershoot's kernel over that ROM. Was just afraid to overclock too high and then cause performance issues with my tab. But I will go on ahead and overclock to 1.4. Thanks slack.. will click the 'thanks' button right now! And please.. if anyone is aware of a reason why I should NOT do this, please advise
Please use the Q&A Forum for questions Thanks
Moving to Q&A
My tab runs perfectly stable at 1.4 ghz. If you have trouble just clock back down.
Sent from my DROID2 using XDA App
Thanks FillTheVoid... so just to be sure, do I just set the Min and Max to 1.4ghz?
seanmack said:
Thanks FillTheVoid... so just to be sure, do I just set the Min and Max to 1.4ghz?
Click to expand...
Click to collapse
set the max to 1.4 but leave the min on the lowest setting.
I just installed In Paris v4 ROM into my tab, and flashed pershoot's kernel. However when I go into SetCPU, the max is still only 1.0Mhz. Could I have used the wrong kernel? I used the TW UX one.
mrhazey said:
I just installed In Paris v4 ROM into my tab, and flashed pershoot's kernel. However when I go into SetCPU, the max is still only 1.0Mhz. Could I have used the wrong kernel? I used the TW UX one.
Click to expand...
Click to collapse
Did setcpu ask for SU permissions? If not, go and open up superuser quickly and try again.
Don't forget to click thanks if this helped you!
DaAwesome1 said:
Did setcpu ask for SU permissions? If not, go and open up superuser quickly and try again.
Don't forget to click thanks if this helped you!
Click to expand...
Click to collapse
It was set for permissions. I just reinstalled SetCPU and then it worked right away, weird. Thanks though!
Is setcpu free? If so where can I find it?
its a paid app, but its free for xda members. just search for setcpu 2.2.4 and it should come up.
edit: found it for you:
http://forum.xda-developers.com/showthread.php?t=505419
Thank you for that Jager555
I prefer interactive cpu governor over ondemand.
So, I've upgraded my Siyah Kernel to the latest version and set the CPU UNDERVOLTING to -100mV(default is -No Undervolting), governor to lulzactiveq, max frequency to 1.6(default is 1.4) and voltage control to 1325000 uV (default is 1350000)
Is this safe ? No crashes so far.
Yes there is no problem..,..
Read siyah kernels information its very helpful to you.....
If you face some sort of problems go to siyah setting and hit on default setting.....
Sent from my GT-I9300
Here is screenshots for you.....
Reset setting for default.......
Sent from my GT-I9300
rockondudu said:
Yes there is no problem..,...
If you face some sort of problems go to siyah setting and hit on default setting.....
Sent from my GT-I9300
Click to expand...
Click to collapse
I just had a freezae and needed to remove the battery to reboot it again. Advice of going one step lower to 1.5 ? or increase a few voltage @ 1.6?
is 1400000 good for 1.6?
rockondudu said:
Here is screenshots for you.....
Reset setting for default.......
Sent from my GT-I9300
Click to expand...
Click to collapse
Thanks for the screenshot
P.S : I think the problem is my rom, because its freezing, except for 1.5(stable). Rom is OMEGA 33.3
Well i rebooted my s3 , 1.6 oc and voltage control to default and uv @ -100mV. Its stable. Stay with this?
Hi guys. I have installed on my sgs2 the ressurection remix rom. It is fantastic as others roms but all this roms has a boring issue(if we can call it issue) when the screen is black and i unlook it, it gets up usually after 5 second or more. How can i increase the reaction. I searched to change something in Stweaks but i'm not expert. Can you help me? Thank you.
Hi,
did you flash the roms correctly with a full wipe? On all roms based 4.2 and 4.3 i didnt have this kind of problem.
Did you restore some apps with titanium backup, maybe there´s a problem.
Andi
andi2398 said:
Hi,
did you flash the roms correctly with a full wipe? On all roms based 4.2 and 4.3 i didnt have this kind of problem.
Did you restore some apps with titanium backup, maybe there´s a problem.
Andi
Click to expand...
Click to collapse
Yes i restored my app using another app but i don't think it can be a problem. I think it is related to the cpu speed when the screen if .
Are you using setcpu or similar apps to change the CPU frequency? Cause different governors during screen on and screen off may create such problems.
santhosh502 said:
Are you using setcpu or similar apps to change the CPU frequency? Cause different governors during screen on and screen off may create such problems.
Click to expand...
Click to collapse
Yes. You solve my problem thankyou.
Artificialkid47 said:
Yes. You solve my problem thankyou.
Click to expand...
Click to collapse
If you're using Stweaks (you mentioned that above) then there's no need whatsoever for SetCPU. In fact, the settings in Stweaks and in SetCPU may be clashing with each other. I'd say to get rid of SetCPU and use Stweaks as the kernel dev (I assume dorimanx) intended.
Sent from a galaxy far, far away