I just picked up my S3 and the whole screen had a hazy green tint on the lock screen and was the same when I unlocked, and I wasn't gonna mess about so rebooted quick and back to normal now, and I read another thread about it but isn't clear why it happens, but I checked the battery graph and there's just a huge gap as if no power was getting through at all, so has anyone else had this happen on S3 and what's causing it?
Michael_P said:
I just picked up my S3 and the whole screen had a hazy green tint on the lock screen and was the same when I unlocked, and I wasn't gonna mess about so rebooted quick and back to normal now, and I read another thread about it but isn't clear why it happens, but I checked the battery graph and there's just a huge gap as if no power was getting through at all, so has anyone else had this happen on S3 and what's causing it?
Click to expand...
Click to collapse
Just had this, I put my phone into my shoulder bag, cycled for 10 minutes, picked up the phone and the entire screen was green as if the red and blue pins from a monitor cable had disconnected.
I'm also having charging difficulties, although that may be the cables.
I'm on CM9, literally just updated to the newest nightly now to see if that sorts any issues. There's something just not quite right about this phone of mine. A quick reset was all it took to sort the screen out but it was scary to think such an issue could occur.
All I know is it's something to do with a sudden dip in power and I read about other phones doing it too very occasionally, and after it happened there was a gap on the battery chart as if the phone was getting no power at all.
Sounds like the OS or at least an important process crashed or got stuck (deadlock, livelock, ...).
Green color has something to do with the rendering process and/or screen calibration. All Galaxy S1 with Voodoo patches for the display color values show a green screen for a very short instant after screen-on.
That also explains the gap in the battery stats since a non-functional OS cannot collect any informations.
Did you run any particular apps which might be causing it?
Without any details I can only recommend the standard package: flash your OS again, factory-reset it.
Maybe wiping the cache is enough. Maybe it's a hardware fault, hard to say...
I just rebooted and I've already upgraded since then, and I wasn't doing anything really at the time except I think that was around the time I used G L to SD and it broke the Play Store, but when it Hulked on me I hadn't touched phone for 40 minutes and that's what I saw when I woke it up. but most people say it's a once in a lifetime thing so not really worried.
Related
About a week ago I had just checked an email using the gmail app and put the phone to sleep. I then remembered I needed to do something else on my phone, so I woke it back up. Upon waking, the entire screen was red, I could see the background still, but there was noticeable artifacing at the top of the screen. I unlocked the phone, and it was still the same. I could use the phone as normal, but the entire screen was a translucent red. I put the phone to sleep and woke it back up and everything was back to normal.
I am still in my 30 days of ownership, so I was wondering if anyone thinks this was a one time bug or if there is a deeper problem. At the time I was not rooted and was running 100% stock.
I'd most definately take that phone back and exchange for another.
It _might_ have been a one time issue, or it might have been a symptom of a hardware issue. Why risk it?
Thats not really a common issue... in fact the first that Ive heard of. Could be a one time issue... or a hardware LCD/screen issue. Id take it back.
I hadn't heard of it either. When it happened the phone was only a few days old.
I regularly replace iphone 4 screens and I have come across red tinted screens. At least on them it was a sign of screen problems, not software. Samsung does/did make screens for Apple. I've never heard of an iphone having a red screen then dying. I have heard of them being red and not ever going back to normal colors.
Not worth the risk for me. If it was my phone I'd exchange it.
Sent from my páhhōniē
I had a similar experience, except the screen went green, and wouldn't go away until I rebooted. It was probably due to CF.Lumen though, or at least that's what I thought.
On my Captivate, every once in a long while the screen would boot or unlock with a weird color tint. Seem to recall it having been green, but couldn't swear to it.
Either way, a quick lock/unlock again made it go away. Always figured it was a software bug somewhere in the display driver...
Hi,
I dropped my Galaxy S2 Yesterday (have no idea if this relates to it) But i plugged it into the charger this morning and everything was blue & some of the screen had turned black and some icons had burnt into the screen it looked like.
After taking it with me because it was still usable, Its not completely black except for maybe the faintest part of blue.
Im running Lite'ning rom, The newest one im pretty sure.
Just wondering if this is a virus? Or the screen is dead. I just cant see how it could suddenly die when it was flat and not turned on.
Phones not under warranty by the way. So maybe you could give me some options?
Thanks heaps guys
Probably the problem is hardware related due to the fall, but you could back all your data and try to do a factory reset to see if it fixes or not. If it doesn't fix maybe you should check your screen hardware.
Thanks for the reply,
I just reflashed Litening with Odin 1.85 and still nothing, I get the vibrations, touch lights, sound ect, But only occasionally a tiny little strip of blue along the top.
How would i check my screen hardware? Because i pulled apart my galaxy s after it died and accidently cracked the screen & Glass
How would i do a factory reset by the way? Since i cant see anything
I'd imagine it's dead. I'd take it to your local store and ask for an estimate on how much it would cost to fix it. If you can't see anything, then the screen is either broken or it got disconnected (or maybe some of the ribbons did at least).
Yeah, I just dont really wanna take the phone apart unless i know its likley to fix it.
When i first got it, I noticed it had black splotches on the screen in very dim light on a white background. Nd im guessing id have to almost buy a whole front screen assembly to replace the front screen D:.
Would i be better just to sell the phone how it is? Or repair it?
Hello everyone,
As the title suggests I'm now another proud owner of the Samsung Galaxy S6 Edge (SM-G925F) and immediately a few questions rose.
First of all, I unboxed my device and did the first power on. However, I noticed something weird. From the 1st power on it only had 3% battery ! Is this normal guys? From all of the unboxing videos I watched on YouTube all of them where 40% + after the 1st power on! Is it normal to be so low ?? So, I immediately shut it down and got it charging.
Second, after plugging it in to charge it started from 0%. Probably it even lost these 3% it had lol. Anyway, charging started nice and fast but I noticed another thing. The phone got really hot while charging! Is this normal again? The back was quite hot and the aluminum bezels on the sides as well (especially side lower parts). I know that this device has fast charging so it may be this and also maybe that it started charging from too low , 0% .
(UPDATE: now that it is at 99% it's has really cooled down)
My 3rd question is probably a foolish one but forgive me please. :silly: When I got it out of the box, since I'm a crazy perfectionist, I started examining the body of this jewel with a really bright torch light hahaha. Everything seemed flawless apart from a couple of tiny little marks on the lower left part of the home button. (not scratched some kind of marks like tiny glue residue maybe) They didn't get away after wiping them, even with little water on a cloth. Also, they are not really visible. Maybe they are a bit in really bright conditions but still you should look for them to see them. So, are these kind of tiny imperfections normal too? I guess so, but just wanted to say hahahha.
One more. My heart rate sensor seem to have a little plastic protector applied on it. Am I right? I'm quite afraid to pull it so, is there a little membrane there? In camera, I'm not sure.
Thanks in advance and have fun happy owners!
When I got my first smartphone, the Motorola Droid Ultra on initial boot it had 1% battery, so battery being low on first boot is not unheard of. Yet you are right that it should have 40% on initial boot. The battery going to zero before going up again is something I have experienced as well. The phone getting hot is expected with how rapidly energy enters the battery. The last two I am unsure about. If you can remove the plastic do so
Snowby123 said:
When I got my first smartphone, the Motorola Droid Ultra on initial boot it had 1% battery, so battery being low on first boot is not unheard of. Yet you are right that it should have 40% on initial boot. The battery going to zero before going up again is something I have experienced as well. The phone getting hot is expected with how rapidly energy enters the battery. The last two I am unsure about. If you can remove the plastic do so
Click to expand...
Click to collapse
Thanks for your quick response!
Alright, so yea the low 1st power-on battery seems normal. I also asked Samsung and they say it's normal since they don't set any specific charge amount from factory but they just use it as much as needed (for quality control, I assume).
About the heart rate sensor yea, I realized that it has a little protector film which can be removed.
Also, what I told about the little "marks" on home button let me explain. You can't actually see this normally. You have to have your home button fully clean and then point a bright torch to it and then look carefully on the bottom left part of it and you can see some tiny little "marks" but still can't see them at every angle. However, they are not scratches, it may just be some little debris or glue residue under the button surface, probably on the fingerprint scanner. (maybe during assembly) But again this is from a crazy perfectionist's eye! :laugh::laugh::laugh: You can't see it in normal use. I guess if you take many S6 Edges out of the box and start examining them with a powerful torch, mm by mm for sure you will find different kind of "imperfections" in any of those. This thing must be the same for every device. But I like doing it just to know if there's something there in the first place.
Also, about the warm up thing. I updated to Android 6 and performed a hard reset afterwards. Also I disabled fast-charging from the menu. (don't know if it's also disabled when you charge the phone fully shut down tho.) In normal use the temperature is fine. When charging tho (when shut down) it warms up quite a bit on rear and on side bezels. So, you S6 Edge does the same?
Thanks a lot.
Snowby123 said:
When I got my first smartphone, the Motorola Droid Ultra on initial boot it had 1% battery, so battery being low on first boot is not unheard of. Yet you are right that it should have 40% on initial boot. The battery going to zero before going up again is something I have experienced as well. The phone getting hot is expected with how rapidly energy enters the battery. The last two I am unsure about. If you can remove the plastic do so
Click to expand...
Click to collapse
Also, 1 last question (detail style again).
When you start up the notification led lights dark blue and then lighter blue in sequences. So when it does that, I can tell that there is a little "2nd" led that lights up on the right side of the notification led and makes it brighter blue. My question is that, can you see that in yours? I ask this because in my Galaxy Alpha you can't tell where the "little leds" are but you just see a clean light changing colors. On S6 Edge though, you can tell that the notification led area must be somehow "splitted" so like there is "another little led" on the right side lighting up and changing the color. Is it the same to you?
Thanks
The low battery percentage you had in your phone is just normal.
The phone gets hot when it's being charged especially when it starts from a very low percentage. Do you imagine the amount of energy getting into your phone's battery? That's a lot.
Speaking of leds, mine has the same too.
Hope you have a great time with your phone!
Sent from my SM-G920F using XDA-Developers mobile app
TheLegend975 said:
The low battery percentage you had in your phone is just normal.
The phone gets hot when it's being charged especially when it starts from a very low percentage. Do you imagine the amount of energy getting into your phone's battery? That's a lot.
Speaking of leds, mine has the same too.
Hope you have a great time with your phone!
Sent from my SM-G920F using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you man. I noticed something else too though which worried me quite a lot. I will post it on another topic itself though so it can maybe be helpful for other owners too.
SGAlpha said:
Thank you man. I noticed something else too though which worried me quite a lot. I will post it on another topic itself though so it can maybe be helpful for other owners too.
Click to expand...
Click to collapse
Okay.
Sent from my SM-G920F using XDA-Developers mobile app
Hello everyone, this happened just today. I was using my galaxy alpha AT&T and all of a sudden the screen starting glitching and jumping. I was quite shocked because I bought this phone a few days ago. Although the phone is not brand new but the vendor told me that it's completely fine. Anyhow, I pressed the power button and waited for a few seconds then turned the screen back on. This time the screen was fine but after a few seconds of usage the problem started again. Now i read on the internet that this is not a screen issue but rather its associated with phone's charging port but I'm not sure. And another interesting thing is that the screen shots are completely fine and there are no signs of glitching or flickering. Secondly also note that I was experiencing the famous "cannot charge because battery is too cold!" message and I believe that this problem is also associated with the charging port. So please if anyone is familiar with this problem then guide me. Here a video link that shows what's happening to my screen
https://www.google.com.pk/url?sa=t&...iApUmAM4lJrHPxV6Q&sig2=gXDieE4_dAV6uMn5D-OazA
If you have the screen on the lowest bright setting the flickering will continue. Once I put it back on auto or at a slightly higher level the flickering went away. That's at least what fixed mine.
shawnk320 said:
If you have the screen on the lowest bright setting the flickering will continue. Once I put it back on auto or at a slightly higher level the flickering went away. That's at least what fixed mine.
Click to expand...
Click to collapse
I also had this problem before the only way to fiix this was to set the mimimum brightness to 10 in gravitybox xposed module also the dimming of brightness so that it wont flicker
sfaizan said:
Hello everyone, this happened just today. I was using my galaxy alpha AT&T and all of a sudden the screen starting glitching and jumping. I was quite shocked because I bought this phone a few days ago. Although the phone is not brand new but the vendor told me that it's completely fine. Anyhow, I pressed the power button and waited for a few seconds then turned the screen back on. This time the screen was fine but after a few seconds of usage the problem started again. Now i read on the internet that this is not a screen issue but rather its associated with phone's charging port but I'm not sure. And another interesting thing is that the screen shots are completely fine and there are no signs of glitching or flickering. Secondly also note that I was experiencing the famous "cannot charge because battery is too cold!" message and I believe that this problem is also associated with the charging port. So please if anyone is familiar with this problem then guide me. Here a video link that shows what's happening to my screen
https://www.google.com.pk/url?sa=t&...iApUmAM4lJrHPxV6Q&sig2=gXDieE4_dAV6uMn5D-OazA
Click to expand...
Click to collapse
I've never had encounter this kind of problem. Your problem is too severe. I think it is related to the hardware.
(UPDATE: Here is a link to a short video of my issue: https://youtu.be/YqKW3tU4Fhw)
So I cant seem to find ANY info relating to this issue aside from results for the LG G4, but the solutions for said phone are all over the place. Some are bad screen, some are related to sim tray, some are related to water damage and battery etc. So basically, about a month after buying this phone (KIW-L24 US version), the screen started to artifact and flash in and out randomly. There is nothing that seems to trigger it. I have set the phone down on a table while on the homescreen and watched the lightshow. It is basically a mixture of the problems seen in these videos (Feat. LG G4).
https://youtu.be/gAUkXLR7eQI And https://youtu.be/QstOH66pfiU.
Symptoms:
Screen will randomly start to flicker and fade in and out. I will also get crazy artifacting lines. (Think de-gaussing an old CRT monitor or simillar to what is seen in the second video)
If i see the problems happening, locking the phone and unlocking again will sometimes fix it temporarily. Other times the problem continues after i turn the screen back on.
Sometimes the screen will refuse to come back on. The backlight turns on, and the digitizer responds, but the screen is still black. Making sure the screen really is off, I can come back to the phone a few minutes later and it will turn on. Other times ill have to hard reset the phone (hold power button 10 sec) and it usually brings the screen back to life.
Background:
I bought the phone "used - Like New" from amazon. It came with all the original accessories and even still had the film protector on the back of the phone. I may have noticed these problems after I received the phone, but they really only started to show about a month after purchase.
At first I though it could be software related as I was running CM13 and something could have been corrupted, so i did not just a factory restore, but a full reflash. This didn't solve the issue. Restarting my phone and the reflash did help, but the problem returned. The inability to turn the screen on persists through a reset and I have to wait till the phone boots again to get the screen back. Sometimes takes more than one reboot. This pretty much confirms a hardware issue right? If i put the phone on a black screen, i can see three small fuzzy "dots" in a triangle shape in the top left quadrant. Could the screen have been damaged by whoever owned it before returning it? They are not dead pixels per se, but seems more like areas where the backlight is showing through ever so slightly more. Not visible unless you are on a black screen in a dark room. Ill upload a video showing some of the issues. Any help is appreciated!
im afraid you need a new display brodar...
Seems to be hardware issue. You can visit the nearest service center to get it fixed for few bucks if you don't have warranty.
Yeah that's what i figured, i just needed conformation. I was able to get amazon to take the return even though I was out of the return period. So at least ill be able to get a refund. Ill just pay the extra for a new one this time haha.
One question : Do u have over heat problem with ur phone ?? If u feel ur phone is more than work from the back dont replace . U'll damage the new screen also . Some ppl erported over heat cpu issue with honor ! ;.
KobaltPanther said:
(UPDATE: Here is a link to a short video of my issue:
)
So I cant seem to find ANY info relating to this issue aside from results for the LG G4, but the solutions for said phone are all over the place. Some are bad screen, some are related to sim tray, some are related to water damage and battery etc. So basically, about a month after buying this phone (KIW-L24 US version), the screen started to artifact and flash in and out randomly. There is nothing that seems to trigger it. I have set the phone down on a table while on the homescreen and watched the lightshow. It is basically a mixture of the problems seen in these videos (Feat. LG G4).
And
.
Symptoms:
Screen will randomly start to flicker and fade in and out. I will also get crazy artifacting lines. (Think de-gaussing an old CRT monitor or simillar to what is seen in the second video)
If i see the problems happening, locking the phone and unlocking again will sometimes fix it temporarily. Other times the problem continues after i turn the screen back on.
Sometimes the screen will refuse to come back on. The backlight turns on, and the digitizer responds, but the screen is still black. Making sure the screen really is off, I can come back to the phone a few minutes later and it will turn on. Other times ill have to hard reset the phone (hold power button 10 sec) and it usually brings the screen back to life.
Background:
I bought the phone "used - Like New" from amazon. It came with all the original accessories and even still had the film protector on the back of the phone. I may have noticed these problems after I received the phone, but they really only started to show about a month after purchase.
At first I though it could be software related as I was running CM13 and something could have been corrupted, so i did not just a factory restore, but a full reflash. This didn't solve the issue. Restarting my phone and the reflash did help, but the problem returned. The inability to turn the screen on persists through a reset and I have to wait till the phone boots again to get the screen back. Sometimes takes more than one reboot. This pretty much confirms a hardware issue right? If i put the phone on a black screen, i can see three small fuzzy "dots" in a triangle shape in the top left quadrant. Could the screen have been damaged by whoever owned it before returning it? They are not dead pixels per se, but seems more like areas where the backlight is showing through ever so slightly more. Not visible unless you are on a black screen in a dark room. Ill upload a video showing some of the issues. Any help is appreciated!
Click to expand...
Click to collapse
Try moving to stock once , if it fixed stick to it for few days . 99% of possible cases for hardware issue .
So better request for a replacement from huawei . but don't mention them that u bought it used . tell them u bought it new