Hello ,
i have JB 4.1.1 it was work very good but when i upgraded my phone to JB 4.1.2 I9100XXLS8 by odin :good:
then the power off button doesn't work well .
when i press on it for two seconds the phone restart directly
ordinarily show power off or restart or Airplane mode or mobile data :good::
please help me to return advantages of it.:laugh:
sorry for bad language....
Re: [Q] power off button don't work good
You got an I9100 right?
Sent from the little guy
yes
The power button was ok before flashing?
If yes, reflash.
If no, it's dusty or something.
Sent from the little guy
yes
I'll try to reflash
then I tell you what will hapen:good:
Hi,guys
I`m writing to you to help me with the problem i have with my phone.I apologize for my bad english.
Last week my power on/off button stopped working.
I made a call and after that the pohone didn`t want to lock any more.The phone is unrooted and with unlocked bootloader.I was using latest Optimax rom.I thought it might be software issue,cuz sometimes when i hold the power button the power off/reboot/airplane options appeared,but not every time.
I decided to flash another rom to see if the problem will be fixed.I chose Super Jelly Bean rom.
First i chose the wrong Lupus kernel ,but then with the right one i didn`t have problem.
I flashed the rom with all wipings done only without flashing .587.ftf cuz i did that when flashed the optimax rom.
The phone booted with Super Jelly Bean ,but i still got the problem with the power button.
So i decided to flash .587.ftf ,but i wasn`t able to enter flash mode.Whenever i manged to power off the phone,it immediately started booting up and pressing the back key didn`t help.
I hope you can understand my explanation and hlep me slove the problem.
My phone is working now , but power button doesnt respond.
savvio said:
Hi,guys
I`m writing to you to help me with the problem i have with my phone.I apologize for my bad english.
Last week my power on/off button stopped working.
I made a call and after that the pohone didn`t want to lock any more.The phone is unrooted and with unlocked bootloader.I was using latest Optimax rom.I thought it might be software issue,cuz sometimes when i hold the power button the power off/reboot/airplane options appeared,but not every time.
I decided to flash another rom to see if the problem will be fixed.I chose Super Jelly Bean rom.
First i chose the wrong Lupus kernel ,but then with the right one i didn`t have problem.
I flashed the rom with all wipings done only without flashing .587.ftf cuz i did that when flashed the optimax rom.
The phone booted with Super Jelly Bean ,but i still got the problem with the power button.
So i decided to flash .587.ftf ,but i wasn`t able to enter flash mode.Whenever i manged to power off the phone,it immediately started booting up and pressing the back key didn`t help.
I hope you can understand my explanation and hlep me slove the problem.
My phone is working now , but power button doesnt respond.
Click to expand...
Click to collapse
It seems like a hardware problem to me take your phone to a repair center
Sent from my Xperia Neo V using Tapatalk 2
after installing cm10, cwm's back button (power on button) not working. please help me... :crying:
Well it is working on my device...so is ur back button working normally? Also try changing ur kernel and see if problem exists in any other of them
Cheers,
AJ
hey guys.. i finally decided to change the laggy stock rom to the latest cm11 mod
installation was okay and all.. when the phone started, it kept saying keyboard stopped working
okay i figured that i copied the wrong gapps .. now comes the real problem,
i tried to boot into recovery by holding power and up/down both didnt work
is there a tool to flash the cmw into my phone from my pc then patch the right gapps?
my phone is pretty useless now so please any answer should help thanks.
This is an idea i give you, i don´t know if your home button or power button are working fine but i had that problem when i started this rom installing addiction, my home button was a little damaged so if i want to enter to recovery i have to press it hard. Maybe you should give it a try pressing harder the buttons. Just an idea.
@medothe1: you are more efficiant, if u use the usual buttons to start recovery: power & louder & menu.
When logo bootloader appears, release power-button.
Can get to settings
Team,
i was trying to install some old hacker kernel maybe of MM version accidentaly on my S6 edge Noughat Noble rom, now i am stuck at Creating paths line, not going ahead since hours, neither i am unable to open recovery mode or the other mode, unable to switch off phone as well, kindly help ,,,, emergency.
thanks.
emergency ... unable to swetich off the phone as well ... help .. sos
Just Power + Volume '-' + Home hold it together. When Samsung logo comes then switch fast to 'Volume +' button and also hold it together then will you go to recovery menu.
no dear, its an emergency , i am unable to do anything, i cant even switch off the phone and hence need help for this emergency, show some kindness and plelase help me out from this mess.
rifek4 said:
Just Power + Volume '-' + Home hold it together. When Samsung logo comes then switch fast to 'Volume +' button and also hold it together then will you go to recovery menu.
Click to expand...
Click to collapse
thats the problem dear, tried that when i do it .. it says screenshot saved to device, it is not restarting the phone. What do i do now
npk21 said:
thats the problem dear, tried that when i do it .. it says screenshot saved to device, it is not restarting the phone. What do i do now
Click to expand...
Click to collapse
System is already working or TWRP? Doesn't matter what if you hold power button for 30 sec (something like that, don't remember good) phone must turn-off/turn-on/reboot.
rifek4 said:
System is already working or TWRP? Doesn't matter what if you hold power button for 30 sec (something like that, don't remember good) phone must turn-off/turn-on/reboot.
Click to expand...
Click to collapse
I am on twrp , stuck at kernel installation screen, tried power and volume up and home didnt help , and when i try power and vloume down and home it says screen shot taken, the phone is not restarting at all . cant even switch off the phone.
npk21 said:
I am on twrp , stuck at kernel installation screen, tried power and volume up and home didnt help , and when i try power and vloume down and home it says screen shot taken, the phone is not restarting at all . cant even switch off the phone.
Click to expand...
Click to collapse
Power, Volume DOWN and Home... For longer time (min. 20 sec) not like 5 second.
holy god , you saved it brother, its working now, had to hold the button for 20 secs. thanks i will re install the rom and the kernel in your signature.
thankyou once again, and sorry for creaating new thread, it was an emerggency situation for me,
npk21 said:
holy god , you saved it brother, its working now, had to hold the button for 20 secs. thanks i will re install the rom and the kernel in your signature.
thankyou once again, and sorry for creaating new thread, it was an emerggency situation for me,
Click to expand...
Click to collapse
Just do not panic the next time and look for the answer yourself which is simple