Hello ,
i have JB 4.1.1 it was work very good but when i upgraded my phone to JB 4.1.2 I9100XXLS8 by odin :good:
then the power off button doesn't work well .
when i press on it for two seconds the phone restart directly
ordinarily show power off or restart or Airplane mode or mobile data :good::
please help me to return advantages of it.:laugh:
sorry for bad language....
Re: [Q] power off button don't work good
You got an I9100 right?
Sent from the little guy
yes
The power button was ok before flashing?
If yes, reflash.
If no, it's dusty or something.
Sent from the little guy
yes
I'll try to reflash
then I tell you what will hapen:good:
Related
My phone is Samsung Galaxy S sgh-t959w.and i bought it from moblicity canada.it is runing on android.i haven't done anything to it since i bought it.But.today,my when i power off my phone,it showed me the
Warning:
A custom OS can cause critical problems in phone and installed applications.
some messages here.
Volume up:continue
volume down:Cancel
you guys probably might know this message.ya..as they said,i try press the volume down button first..but nothing happened..and when press volume up button also,nothing just happened.when i pressed power button,the screen blackout for a while then show the warning message again....it just stucked here already!!!!!i try taking out battery and put again.but no use..just the warning message..so i did some research on internet and i could went into recovery mode..and there 4 options available there:
1.reboot(it just went back to warning mode)..
2.apply update from sd card(and there is another problem.i can't go down even i pressed volume down button!!!!but it takes around 15mins to go down!!!WTF>?)
3.clear data something
4.clear cache(just using shortly)
I just bought it 2 weeks ago.!and my mom is going to kill me if i spoil it!!..:crying::crying::cryingLzz help me how to get out of here!!
just connect ur cell to odin , flash stock firmware again , for more instructions google,,
thank me if i helped you
s4shyam95 said:
just connect ur cell to odin , flash stock firmware again , for more instructions google,,
thank me if i helped you
Click to expand...
Click to collapse
Thts the real problem.odin do not detect my ph.and my ph cannot change to downloading mode..
http://forum.xda-developers.com/showthread.php?t=1706918
Dears,
how to screenshot with 4.0.3 LP6?
I've been trying any shortcut, nothing to do...
Tks!
Homebutton + Powerbutton
or new in ICS
Volume Down + Powerbutton
Nothing...
Stock or Custom?
Just checked my device - also aint workin but i bet its bcz of the custom Rom & Kernel
*edit* works fine
Stock, with CF-Root...
*edit*
Both work fine xD
just had to press it a little longer (2sec), try it - you need to be quite simultaneously
...btw how do i verified by mods??
You're so right dear friend, I need to press both at the same, while I used to press Volume- first with previous releases...
Thank you so much!
Hi guys
I'm facing a problem i'm not very comfortable with...
Just bought for my wife a Galaxy S2 running Gingerbread 2.3.5.
I planned to root it and migrate him later on to latest Sammy on JB...
As per many tutos, to root the tel, you inject ( using Odin) the right CF_root from chainfire once the telephone is in the so called download mode
and here comes the problem...Vol- & Home & Pwr do nothing...It just boots the tel...No DL mode at all !!!
Are there GS2 around with no DL mode ? or is there a way to force this DL mode ?
( I've tried a suggestion which did not work..i.e remove batt , wait 30s, press vol-,pwr, home and reiensert batt without releasing the keys)
Any suggestion more than welcome
zorglub! said:
Hi guys
I'm facing a problem i'm not very comfortable with...
Just bought for my wife a Galaxy S2 running Gingerbread 2.3.5.
I planned to root it and migrate him later on to latest Sammy on JB...
As per many tutos, to root the tel, you inject ( using Odin) the right CF_root from chainfire once the telephone is in the so called download mode
and here comes the problem...Vol- & Home & Pwr do nothing...It just boots the tel...No DL mode at all !!!
Are there GS2 around with no DL mode ? or is there a way to force this DL mode ?
( I've tried a suggestion which did not work..i.e remove batt , wait 30s, press vol-,pwr, home and reiensert batt without releasing the keys)
Any suggestion more than welcome
Click to expand...
Click to collapse
Tried a USB jig? They are intended to force DL mode. Never used one myself though. What you've already done would have been my first port of call. Also, have you tried recovery mode? (Vol up, Home, power). That way you can tell if its the vol. down button thats not recognising the keypress. On my tablet, that's the case, it takes a bit of poking/fiddling to get into recovery mode as my vol up button is sketchy.
Hopper8 said:
Tried a USB jig? They are intended to force DL mode. Never used one myself though. What you've already done would have been my first port of call. Also, have you tried recovery mode? (Vol up, Home, power). That way you can tell if its the vol. down button thats not recognising the keypress. On my tablet, that's the case, it takes a bit of poking/fiddling to get into recovery mode as my vol up button is sketchy.
Click to expand...
Click to collapse
You can try something.....turn off phone,and pull out-reinstert battery.Don't turn on yet!Now start pressing and holding the VOL DOWN button only.With phone turned off,and pressing the VOL DOWN key,put in charger.Keep holding the button,until you see Download mode.If that doesn't work,maybe VOL button is faulty.Also,try a Jig.It has to work
Yeah...the USB Jig was THE solution...and without yr suggestion I would'nt have had the idea to use it..and this for a good reason...My own GS2 does not react to USB jig ( the only solution to enter DL mode is the key combination) where my wife's GS2 enters DL mode ONLY with this Jig...
So one more time, thks to you all...
All the best
zorglub! said:
Yeah...the USB Jig was THE solution...and without yr suggestion I would'nt have had the idea to use it..and this for a good reason...My own GS2 does not react to USB jig ( the only solution to enter DL mode is the key combination) where my wife's GS2 enters DL mode ONLY with this Jig...
So one more time, thks to you all...
All the best
Click to expand...
Click to collapse
Bcoz the usb jig was intented to work wid old bootloader of 2.3
doctor_droid said:
Bcoz the usb jig was intented to work wid old bootloader of 2.3
Click to expand...
Click to collapse
Ah this is ennoying...because it means that, now i'm on JB 4.1.2 this jig may not work properly...
Why do I bother ?
Simply because I have discoverd that this new GS2 has probably an H/W problem i.e The Vol Down key seems to be dead and that leads to another question Are the Vol keys simple H/W stuff, establishing contact or not or is it under software control ?
Browsing PhilZ recovery, I've seen a brief on screen message "Vol Down enabled"followed immediately by "Vol Down disabled" which I've not been able to reproduce..
So i'm in the blue....H/W or S/W problem
BTW, there may be a solution I had not thought to...
the power button , when hit, takes me to a 4 way reboot in which there is among the options, reboot in download
this may be the solution i'm after...and which I'll test as soon as my wife lets me approach her phone...lol
thks fr yr concern
I would be very careful when mucking around without the proper hardware functions. I would advise getting it fixed before continuing. If something goes wrong and you need to use the hardware combo to get into download mode to flash stock, you're stuffed. End of story. Messing with phones with no escape plan is a bad idea.
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
Mobile Odin will get you outta that button mess. You can always flash philz or siyah v6 with it.
You should get them fixed.
Sent from my GT-I9100 using xda app-developers app
Hi guys,
I forgot the pin-code to my Galaxy S2, not to the sim, to the phone.
I can't go into recovery mode or download mode, due to a broken home-button.
Is there any way I can like hack the pin, or reset the phone without having to use my home button?
Maybe by using my pc or something?
Thanks in advance for your help!
David1996 said:
Hi guys,
I forgot the pin-code to my Galaxy S2, not to the sim, to the phone.
I can't go into recovery mode or download mode, due to a broken home-button.
Is there any way I can like hack the pin, or reset the phone without having to use my home button?
Maybe by using my pc or something?
Thanks in advance for your help!
Click to expand...
Click to collapse
1. Turn off the i9100 S 2 phone or take out the battery and reinsert it.
2. Hold the Volume Down button
3. Press and release the Power button
4. Select Clear Storage by pressing the Volume Down button
5. Press and release the Power button
6. Press Volume Up to confirm i9100 master reset
Havent tried it but hope it helps mate
Out of curiosity how do you multitask with a broken home button?
machokingjim said:
1. Turn off the i9100 S 2 phone or take out the battery and reinsert it.
2. Hold the Volume Down button
3. Press and release the Power button
4. Select Clear Storage by pressing the Volume Down button
5. Press and release the Power button
6. Press Volume Up to confirm i9100 master reset
Havent tried it but hope it helps mate
Out of curiosity how do you multitask with a broken home button?
Click to expand...
Click to collapse
Man I thought it was impossible to get into download mode but you got me there!
Unfortunately I do not see the "Clear Storage" option.
The volume down button gets me into a reboot.
Volume up gets me to downloading.
Is there any way I can get into recovery? Or download something to the phone that resets it?
And eh, multitasking, that is kind of hard with no home button.
The back button gets some more use since the home button has died haha
David1996 said:
Man I thought it was impossible to get into download mode but you got me there!
Unfortunately I do not see the "Clear Storage" option.
The volume down button gets me into a reboot.
Volume up gets me to downloading.
Is there any way I can get into recovery? Or download something to the phone that resets it?
And eh, multitasking, that is kind of hard with no home button.
The back button gets some more use since the home button has died haha
Click to expand...
Click to collapse
If you want to get yourself into recovery mode try something simpler
A cwm manager app
It has the option boot into recovery
machokingjim said:
If you want to get yourself into recovery mode try something simpler
A cwm manager app
It has the option boot into recovery
Click to expand...
Click to collapse
Problem is, I cannot acces my phone so I can't install apps
I'm thinking about flashing another rom, only I can't wipe cache and factory reset before doing that.
What are the risks of that? And is there a big chance of this going wrong?
David1996 said:
Problem is, I cannot acces my phone so I can't install apps
I'm thinking about flashing another rom, only I can't wipe cache and factory reset before doing that.
What are the risks of that? And is there a big chance of this going wrong?
Click to expand...
Click to collapse
Mate, if you can enter download mode then use odin to flash
I am not sure you can enter recovery mode without home button though you can with a jig
But haven't tried it
Search xda it if you have a jig
machokingjim said:
Mate, if you can enter download mode then use odin to flash
I am not sure you can enter recovery mode without home button though you can with a jig
But haven't tried it
Search xda it if you have a jig
Click to expand...
Click to collapse
Thanks, flashing right now.
Had flashed a few hours ago, but still got asked for the pin.
Though then I had to register the phone (name, language, that stuff) and after that I was in the phone, and did not have to enter the pin.
Doing that again right now, hoping to get to settings and then get to factory reset
Thanks for your help so far.
Then another question popped up:
To get another kernel I need recovery mode right?
And to get rooted I need a rooted kernel?
So can I root my device without home button and without recovery menu?
David1996 said:
Thanks, flashing right now.
Had flashed a few hours ago, but still got asked for the pin.
Though then I had to register the phone (name, language, that stuff) and after that I was in the phone, and did not have to enter the pin.
Doing that again right now, hoping to get to settings and then get to factory reset
Thanks for your help so far.
Then another question popped up:
To get another kernel I need recovery mode right?
And to get rooted I need a rooted kernel?
So can I root my device without home button and without recovery menu?
Click to expand...
Click to collapse
Yes mate you can even get the multitasking switcher using the back button
Glad i helped
Try dorimanx kernel
using it and loving it
Hope it fits you too
machokingjim said:
Yes mate you can even get the multitasking switcher using the back button
Glad i helped
Try dorimanx kernel
using it and loving it
Hope it fits you too
Click to expand...
Click to collapse
Downloaded Siyah, if I don't like Siyah, i'll try dorimanx
Thanks for the help man!
David1996 said:
Downloaded Siyah, if I don't like Siyah, i'll try dorimanx
Thanks for the help man!
Click to expand...
Click to collapse
no problem at all mate:highfive:
happy to help
siyah is outdated by now so you may have to look for a new kernel soon
and dont flash android 10.3 in siyah
regards
hi, I have a i9100G s2, which is operating normally, but does not turn off once more by power button,
but removing and reinserting the battery alone and then you start running properly (stock firmware) I tried to reset but nothing.
What can be?
I try to install new firmware with Odin?
To go into recovery mode or download must first hold down the appropriate keys and then insert the battery, otherwise it goes through
thank you
Retranslation
Hi, I have a G i9100, which works regularly, but if off will not light with power button, but by removing and reinserting the battery starts alone and then work properly (stock firmware)
I tried reset but nothing.
What can be?
I try new firmware with ODIN?
To go into recovery or download mode I have to first hold down the volume keys and then insert the battery, otherwise it goes
Thank you
I forgot how stock sgs rom look xd Do you got there buttons settings? If yes tick it again maybe then it will start triggering if no backup your staff and do factory reset and if it doesnt help just flash stock rom again. Maybe there are better ways but these should work too
Oh I forgot to ask... But your button works normally? As like turns off screen etc?
And work on your eng man it is important skill nowadays
Sent from my iPad using Tapatalk
... flash stock rom again .... but it doesn't work.
If charging, you start regularly.
Why???
News:
the button works if the phone is charging