All Further updates will be handled in this other thread
Pre Req:
1) Make sure to install Pantech PC Suite as it will install the correct drivers you WILL need
2) Install ADB and Fastboot
How to gain Root
jcase said:
and here is root, you need fastboot and adb
androidpolice.com/2012/04/09/pantech-burst-rooted-and-the-process-is-stupid-easy/
IOMonster saved the day here, without him you would have to wipe your phone and install modified leaked firmware to get root.
Very glad we decided to not release the initial root, sorry
If IOMonster wants to explain he can, I would prefer not to however.
Details
goo.im/devs/jcase/prestoroot.img
adb reboot bootloader
fastboot boot prestoroot.img
once phone boots, reboot it again, install superuser from the market
Click to expand...
Click to collapse
How to Install Clockwork Recovery
Originally Posted by attn1
tau.shadowchild.nl/files/cwm-5.0.2.7-presto.img.zip
unzip
adb reboot bootloader
fastboot flash recovery cwm-5.0.2.7-presto.img
fastboot reboot
Click to expand...
Click to collapse
Press Volume Down and Power when booting to get into recovery
I have no come up with any of this information. I just gathered from the previous post to make it easier to search. I will try and keep this updated that way we can have a quick reference post at the beginning of the thread
Saved for future use
***Will have a Links section once this gets established***
Using adb with Ubuntu Linux - forum.xda-developers.com/showpost.php?p=28041279&postcount=641
Step by Step Root Guide - androidpolice.com/2012/04/09/pantech-burst-rooted-and-the-process-is-stupid-easy/
***Special Thank you goes to:***
jcase
Attn1
IOMonster
bulletproof1013
903tex
jackattack79
sandix
mr72
and everyone I didn't get *will update as we go*
from marcusmarcus
marcusmarcus said:
Here is what I did to get root on mine, maybe it will clear up things for others.
*Note, I am on 64bit Windows so folders will be different on 32bit windows.
On phone:
go to settings > Applications > Development > turn on USB Debugging
On Computer:
1-Download and install Pantech PC Suite from c724062.r62.cf2.rackcdn.com/PantechPCSuite_1.0.10.3314.exe
2-Launch Pantech PC Suite and update if it asks. When PC Suite is fully updated, plug phone into computer until device is recognized.
3-Download and install Android SDK from developer.android.com/sdk/index.html
4-Start SDK Manager and check the box next to “Android SDK Platform-tools” and install package.
5-Download prestoroot.img from dl.dropbox.com/u/9772722/XDA%20Forums/prestoroot.img and save it to “C:\Program Files (x86)\Android\android-sdk\platform-tools”
6-Download cwm-5.0.2.7-presto.img from tau.shadowchild.nl/files/cwm-5.0.2.7-presto.img.zip and save it to “C:\Program Files (x86)\Android\android-sdk\platform-tools” as well
7-Now open your command line and navigate it to “C:\Program Files (x86)\Android\android-sdk\platform-tools” folder
Run the following command
Code:
adb reboot bootloader
When the bootloader screen shows up on your phone then wait a few seconds to make sure your phone is recognized by the computer then run the following command
Code:
fastboot boot prestoroot.img
After phone reboots itself, shut the phone down and turn it back on again.
Then run the following command
Code:
adb reboot bootloader
When the bootloader screen shows up again then type the following commands
Code:
fastboot flash recovery cwm-5.0.2.7-presto.img
fastboot reboot
8-When the phone boots up this time, download the play.google.com/store/apps/details?id=com.noshufou.android.su superuser app[/URL] from Google Play
---------- Post added at 09:10 PM ---------- Previous post was at 09:06 PM ----------
FYI,
I've tried uot.dakra.lt UOT Kitchen couple times so far and have been ale to change the font of the device and the color of the glow for overscrolling but my time and other icons up in the status bar disappeared (the "AT&T" still shows up there though). The Backup and Restore in CWM does work nicely though to get me back to before I installed the zip from UOT Kitchen. I'll try 1 mod at a time using UOT kitchen and see which is making the icons and time disappear from my status bar.
EDIT: I did notice one issue with CWM backups. The backup I did today saved the folder name as "1970-02-22.03.14.56". Some reason the date is wrong in the file naming, should have started with "2012-04-13", right?
Click to expand...
Click to collapse
I hope this helps
For those having trouble with a missing driver I followed the below instructions and installed PDAnet (I did so while in fastboot mode so I could see the drivers install) as soon as it installed and the drivers showed installed. I went back and uninstalled pdanet (leaving the needed drivers behind)
hawkwind212 said:
I solved my problem by referencing to part II of the following page:
theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/Describe
Be sure to download two programs PDANet and USBView (which you may not really need but it's a nice little program).
It's suppose to be "stupid easy" to root PANETCH Burst, but who ever said that left out that it's not so easy if you don't have all the proper driver on your computer. Anyway, so soon after the fastboot mode is brought up, you should notice the computer is telling you a new hardware is found. This is when the burst switches from PANTECH's ADB driver to something else, and only way for the command "fastboot boot prestoroot.img" to work is to find the proper driver for the new hardware call "Android" in the device manager. Now you want to install PDANet, and as soon as the installation process begin, it'll find the driver for the device "Android." and install the driver for you. Once the driver is installed, the installation process will tried to install whole bunch other things into your phone, but I really don't think it can install them in fastboot mode, so you'll probably want to terminate the process. Now type command "fastboot devices" and you should see some kind of output telling you that it's recognize the "Android" device. Now, and only now you can follow the rest of "stupid easy" rooting instruction.
Click to expand...
Click to collapse
Spoiler Alert: Noob question.
Does this method unlocks the phone SIM also?? If not, there is a method to do it??
Thank you
tremeree said:
Spoiler Alert: Noob question.
Does this method unlocks the phone SIM also?? If not, there is a method to do it??
Thank you
Click to expand...
Click to collapse
This method doesnt but sim unlock is currently also being worked on.
Is there a Mac version of any of this software?
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
tfranzman said:
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
Click to expand...
Click to collapse
What software? Root..?
Cwm?...drivers? Carrier unlock for another provider? Pdl? I'm confused on what your asking...
Sent from my PantechP9070 using xda premium
bulletproof1013 said:
What software? Root..?
Cwm?...drivers? Carrier unlock for another provider? Pdl? I'm confused on what your asking...
Click to expand...
Click to collapse
I think tfranzman is referring to Pantech PC Suite and Android SDK. The Android SDK I believe has a Mac version but I do not think the Pantech PC Suite has a Mac version.
<QUOTE>Download software installed on PC : Click Here
Download MyPhoneExplorer Client App which software installed on Pantech Burst/ Breakout. You must find this from android market or you can read my previous post to get this : Click here
Connect your Pantech Burst/ Breakout device using your USB Cable Data
Please restart your phone and your Computer
After restarting finished, Now launch the installed MyPhoneExplorer Client app on your Pantech Burst/ Breakout and click on OK or Enable and it will connect to the PC Automatically,
Note :
If connection doesnt start or error you can choose another Sync software like Android Sync Manager WiFi.
If you are want Pantech Burst/ Breakout to connect on Mac OS X please follow my previous post : iSync for Mac OS X . I hope you are enjoy with this software.If any problem for downloading ,please contact me anytime</QUOTE>
I don't have a mac so I haven't tested this but this is what I found with google
Any news on CM7/9?? Im already rooted and im just playing around with UOT Kitchen
Let me know, thanks
No news as of yet. there have been people stating they are working on this but we haven't recieved any updates in awhile that I know of atleast. Anyone else reading this please feel free to correct me
All Further updates will be handled in this other thread
tfranzman said:
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
Click to expand...
Click to collapse
There is only Windows version of Pantech PC suite. proof
Finn81 said:
There is only Windows version of Pantech PC suite. proof
Click to expand...
Click to collapse
they were asking if any of the software we are using would work on a mac. the answer is yes depending on what software you are refering too. the pantech suite (which has been useless to me with the exception it installed the drivers for me) is windows only. I had actually gotten the drivers originally at work by using pda net. The information I gave above is what I came up with after a quick google search. I'm not sure if that or pdanet for mac would have those drivers.
and again this thread has ended. please follow the links in my Signature (Burst love for discussion or burst essentials for rooting information
I keep tring to root this phone but phone gets stuck in the fastboot mode and does nothing what can i do for this?
sounds like you don't have the fastboot driver installed. all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
kagedws6 said:
sounds like you don't have the fastboot driver installed. all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
Click to expand...
Click to collapse
Can you point me to the right place to get the fastboot driver's please
mobgod said:
Can you point me to the right place to get the fastboot driver's please
Click to expand...
Click to collapse
kagedws6 said:
all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
Click to expand...
Click to collapse
install PDAnet on your computer. it will install the drivers
Related
Pantech crossover how to root.
1. install Android sdk and update.
2. enable usb debuging on your phone.
3. Download and install the pc suite to get the adb driver for the crossover.
http://www.pantechusa.com/support/crossover_p8000
4. download and extract superoneclick http://forum.xda-developers.com/showthread.php?t=803682
5. make sure that adb can see your device. From a command prompt change directory to the place that you installed the android sdk android-sdk\platform-tools and run "adb devices" you should see your device connected.
6. run superoneclick.exe make sure that you select GingerBreak from the exploit menu
7. donate me.
I am running kernel version 2.6.32.9
Bump. I figured out how to root the crossover.
josefcrist said:
Bump. I figured out how to root the crossover.
Click to expand...
Click to collapse
it gets stuck on step #6
any advice?
Well are you getting an error or what is going on?
same here. it is stuck at 6 ...no errors but it stays forever
eeter said:
same here. it is stuck at 6 ...no errors but it stays forever
Click to expand...
Click to collapse
Did you make sure that you turned on usb debugging and adb can see your phone?
usb debuging is on
How to make sure adb can see the phone?
can explain more how to:
....From a command prompt change directory to the place that you installed the android sdk android-sdk\platform-tools and run "adb devices" you should see your device connected.
checked the adb devices and device is connected. still it is freezing at step 6
Did you make sure and select gingerbreak from the exploit menu?
Worked For Me
I followed the instructions to a T and it worked for me. Thanks a lot josefcrist.
android_noobie said:
I followed the instructions to a T and it worked for me. Thanks a lot josefcrist.
Click to expand...
Click to collapse
Any time.
awesome, thanks !
its keeps not responding and freezes after i click root "adb is seeing my device "
nowseewhatudid said:
its keeps not responding and freezes after i click root "adb is seeing my device "
Click to expand...
Click to collapse
Did you make sure and select gingerbreak?
sorry josefchrist i pulled a stupid my fault thanks for the help
So has anyone gotten this to work yet?
ok so i followed the instructions, i selected gingerbreak, my pantech crossover is still at 2.2.1, adb can see my device, my sd card is unmounted and superoneclick, becomes un responsive at step 7: waiting for device... i also get a little thingy that caught my attention that says "mount:you must be root" any suggestions?
nowseewhatudid said:
sorry josefchrist i pulled a stupid my fault thanks for the help
Click to expand...
Click to collapse
Hey what was the stupid? I may be doing the same thing. If not, I can't get this to work. It just dies at step #5, no error code, SOC freezes, and I have to task kill it. I have no AV enabled. Here's my setup:
- running win 7 Pro x64
- pantech drivers installed
- development is enabled
- adb can see device
- SOC set to gingerbreak
- there is no mem card mounted or even in the device (it gets further if there is... step 7 and dies... maybe file system is inaccessible?)
What am I missing?
I would love to hear if anyone bricked their crossover..I want to root my wife's crossover, but if I bricked it I would NEVER hear the end of it!
llspragulus said:
Hey what was the stupid? I may be doing the same thing. If not, I can't get this to work. It just dies at step #5, no error code, SOC freezes, and I have to task kill it. I have no AV enabled. Here's my setup:
- running win 7 Pro x64
- pantech drivers installed
- development is enabled
- adb can see device
- SOC set to gingerbreak
- there is no mem card mounted or even in the device (it gets further if there is... step 7 and dies... maybe file system is inaccessible?)
What am I missing?
Click to expand...
Click to collapse
im in the same boat as you dude........... only im using windows 7 ultimate X84 (i think thats the number)
---------- Post added at 06:18 PM ---------- Previous post was at 06:12 PM ----------
i have noticed an error message that comes up on the side thingy, it says "mount: are you root?" and ive come to the conclusion that its having a problem gaining root access to the phone... thats all.....
hi all,
i need root for Alcatel one touch 918D. anybody an idea?
cu
How to root Alcatel 918D "Blaze Glory"
1. Install drivers
2. Install Android SDK
3. Make sure that USB-Debugging ist activated on your device
3. Start Dalvik Debug Monitor and make sure that your device is connected
4. Start SuperOneClick 2.3.3.
5. Voila! :-D
CU
EJ
So easy?
I'll try it...
p.s.
Where kan I find Dalvik debug monitor to download?
After many unsuccessful attempts (Gingerbreak, other SOC-Versions) someone in a forum from the philippines told me this way and for me it worked perfect!
The secret was to keep the device connected to DDM! Without that SOC freezes...
CU
EJ
h**p://s14.directupload.net/file/d/2794/biea5dsy_png.htm
EJ_the_DJ said:
1. Install drivers
...EJ
Click to expand...
Click to collapse
Which drivers?
I have no driver for Windows7...?
immerzu said:
Which drivers?
I have no driver for Windows7...?
Click to expand...
Click to collapse
Install "PDANet" on your PC with generic drivers. After that you should find an "Android ADB Phone" on your PC after plug-in the device.
Where can I find the Dalvik debug monitor?
If you installed the SDK you'll find it ..\Android\android-sdk\tools
Use the ddms.bat
Thanks, I've found.
But now he stuck at step 7 (Superoneclick).
any news about the root guys?
and i want to ask you a favore...
i know that some for most of you the steps to follow about the root operation,seems common and easy,but pls not forget that some of us,older than you,we have problem to "follow" you!!
i know that maybe i ask to much,but pls try to write the steps as simple as possible...
thank you very much
p.s you are the best
immerzu said:
Thanks, I've found.
But now he stuck at step 7 (Superoneclick).
Click to expand...
Click to collapse
i have the same problem with you
any solution pls?????
thank you!!!
any news???????
is there any other way to roor?
like un update zip file that we can run fron recovery mode?
pls..help
come on guys!
a little of help pls!!!!
something new?
immerzu said:
something new?
Click to expand...
Click to collapse
nothing at all!!
i do everithing that the other guys did.....but nothing.
soc stucks at step 7...
i have tried in 3 different pc....nothing
....maybe is because my firmware is different from theirs......
v23AAG0 greece
the guy that i have told has v23AAE0 germany
we must find another way to root....soc does not work at least for me!!
Firmware:
2.3.5
Build-Number:
v23AAE0
nothing to make. Tried on two PC.
something must be different
How to root OT918
Download this: ht tp: //w ww. unlockroot. com / index .htm
(sorry, i still can't post a link since i'm new. just remove the spaces on the posted link above)
1. Install the unlock root in your PC.
2. Enable USB Debugging mode on your device.
3. Connect your device to your PC using a USB cable.
4. Install the driver from the application shortcut menu under "Programs" on your PC.
5. Run the Unlock Root application.
6. Choose your device from the list of autodetected devices.
7. Click the Root button to start the rooting process.
8. Wait for it to complete the installation, after which you’ll be greeted with a message saying your device has been successfully rooted.
9. After the rooting process, simply reboot your device for the changes to take effect.
To check if you successfully rooted your device, just look if the Superuser app was installed.
Hope this help, tried and tested on windows 7 with my OT918
jhezsie20 said:
Download this: ht tp: //w ww. unlockroot. com / index .htm
(sorry, i still can't post a link since i'm new. just remove the spaces on the posted link above)
1. Install the unlock root in your PC.
2. Enable USB Debugging mode on your device.
3. Connect your device to your PC using a USB cable.
4. Install the driver from the application shortcut menu under "Programs" on your PC.
5. Run the Unlock Root application.
6. Choose your device from the list of autodetected devices.
7. Click the Root button to start the rooting process.
8. Wait for it to complete the installation, after which you’ll be greeted with a message saying your device has been successfully rooted.
9. After the rooting process, simply reboot your device for the changes to take effect.
To check if you successfully rooted your device, just look if the Superuser app was installed.
Hope this help, tried and tested on windows 7 with my OT918
Click to expand...
Click to collapse
the same ****
http://i.imgur.com/Uyivg.jpg
yeah....the same.....nothing works here.....
what the hell is going on with this phone??
The phone lives. :-D
immerzu said:
The phone lives. :-D
Click to expand...
Click to collapse
i dont know yet for how long its will be alive...
my hummer is ready for use
/dev/block/mtd
that is always the last script that i see in soc
in step 7,with the sdcard unmount
I am trying to use 'adb' from the android dev kit but I cannot see the devices, i.e. 'adb devices' doesn't report any devices. It appeared to be working earlier this evening but not any more. I was going to push a rom file to my rooted phone but obviously since I no longer see the device I am stuck. I rooted yesterday and installed the maximus rom but my phone went into a loop of restarting. Unfortunately I didn't backup before I rooted and installed Maximus rom.
Can anybody offer any help? I am using Mac OSX.
Desperate since phone is now effectively redundant
adiemask said:
I am trying to use 'adb' from the android dev kit but I cannot see the devices, i.e. 'adb devices' doesn't report any devices. It appeared to be working earlier this evening but not any more. I was going to push a rom file to my rooted phone but obviously since I no longer see the device I am stuck. I rooted yesterday and installed the maximus rom but my phone went into a loop of restarting. Unfortunately I didn't backup before I rooted and installed Maximus rom.
Can anybody offer any help? I am using Mac OSX.
Desperate since phone is now effectively redundant
Click to expand...
Click to collapse
try this: http://forum.xda-developers.com/showthread.php?t=1706918
if it didnt help u just reply and we´re gonna look whats next to unbrick ur phone
Hi
Thanks for your reply, I have hit the 'Thanks' button
I read the posting you referenced but it doesn't really offer a solution to my problem.
As described earlier I rooted my phone and flashed a Rom (Maximus) succesfully but on turning the phone on after installing the new Rom I got into a cycle of the phone rebooting without actually getting past the lock screen. My thoughts at that stage were to re flash using stock rom but on running fastboot and plugging into my Mac OSX machine via USB, the phone doesn't show up in 'devices' on the Mac. I have also tried 'adb devices' form within Android Dev Tools and although 'adb' runs fine no device is reported. Of course without devices being avaialble to 'adb' then I cannot reflash!
I have also tried from within a bootcamp installation of 'Windows XP' installed on the mac with the same results, this with 'HTC Sync' installed and therefore providing the USB Drivers required within Windows.
I have tried logging into fastboot using 'power' and 'Down Volume' at various stages of the boot process on the phone but have never seen the phone within devices.
Clearly prior to installation of the Rom (Maximus) I could see devices at both the Finder window on the Mac and from adb devices.
Any help or insight you could provide would be very gratefully received
Ok ok ok dont worry
I had to read a bit and found quit much german threads where they flash back the stock rom
as is suggested u cant flash it with odin...
the only solution i woul suggest is that u have to find a computer running windows
there its very easy to restore the stock with the methods u described earlier in the thread...
hope u get done let me know what happend
=)
The question remains; how can I flash anything be it a hacked rom or an official rom when I cant see the 'device' in both windows and mac osx?
I think what I am looking for is a reason why the phone isn't seen when plugging in via USB. Once it is seen as a 'device' I will be able to flash anything via 'adb'.
Thank you for your continued interest and assistance
ok so u know how the get it back but ur phone is not really recognized by ur computer
but i found a method using the bootloader
the problem is that the instructions are in german
but i think if u google a bit u may find it
Don't know if I misunderstood what you said..but to get into recovery, you hold volume down and the power button when the phone is turned off. Not during the boot process.
Yes you can do it with bootloader (power+volume down)
Sent from my HTC Salsa C510e using xda premium
moksha098 said:
Yes you can do it with bootloader (power+volume down)
Sent from my HTC Salsa C510e using xda premium
Click to expand...
Click to collapse
Yes, I know that. He said he attempted to do that DURING the boot process. I was stating that he had to do it while the phone was powered down.
Guys, I can get into recovery no problem. The issue is that my phone doesn't show up in devices on the mac finder window and hence when I run 'ADB Devices' from the mac when the phone is plugged into the mac with USB no device is found and so no serial number is reported in my terminal window on the mac. If I can get to see the device with 'ADB' I can push the rom and recover the phone. At the moment the phone is bricked.
Thanks guys for your continued assistance.
adiemask said:
Guys, I can get into recovery no problem. The issue is that my phone doesn't show up in devices on the mac finder window and hence when I run 'ADB Devices' from the mac when the phone is plugged into the mac with USB no device is found and so no serial number is reported in my terminal window on the mac. If I can get to see the device with 'ADB' I can push the rom and recover the phone. At the moment the phone is bricked.
Thanks guys for your continued assistance.
Click to expand...
Click to collapse
But if this doenst work why dont u try the method with the recovery mode or the bootloader i suggested
when i try to boot insecure.img it says cannot load "insecure.img" : no error
placed insecure.img in the root path (where i installed adb C:\Android)
but my device is detected by cmd "fastboot devices"
also installe HTCSync 3.0.0.007
also in Windows device manager i can see "my htc"
whats wrong?
anyone can help me
my device is "unlocked" and s-off
if i remember correctly - all the htc sync stuff should be turned off completely (through the task manager)
look here:
http://forum.xda-developers.com/showthread.php?t=1416896
guru_shastri said:
if i remember correctly - all the htc sync stuff should be turned off completely (through the task manager)
look here:
http://forum.xda-developers.com/showthread.php?t=1416896
Click to expand...
Click to collapse
htc sync is turned off bytheway cant connect tablet via sync(htcsync can not find device is problem?)
but by fastboot devices cmd is listed
and in widows 7 device manager
still didnt load insecure.img
Iv installed new htcsync correctly find my Device then i turned off htcsync pc antyvirus windows firewall
and try to root it reboot in bootloader but it still cant load insecure.img(is in root folder where adb rooted and added in "invironment var." path C:\Android)
I have :
1. adb&fastboot (11MB) extracted from sdk(downloaded work good & root in C:\Android)
2. JETSTREAM-DooMLoRD-insecure-kernel-autoroot-test2-boot.img(renamed insecure.img and copy to C:\Android )
3. DooMLoRD_v2_ROOT-busybox-su
4. htc driver (find in fastbootdevices cmd and htcsync)
5. usb debbug mode
is that enough for rooting?
help please
did u make sure all the adb processes in the background are closed?
guru_shastri said:
did u make sure all the adb processes in the background are closed?
Click to expand...
Click to collapse
thanks for replying
how can i be sure is not running in background by taskmanager?
usually i use adb once and fresh to avoid interfering
i dont think thats problem bytheway i test again
can device b s-0ff without rooting?
in my device is so! (s-off unlocked but not rooted)
another Q can use wifixmanager to fix wifi problem when using another SIMprovider(not AT&T sim)
i'm having hard time figuring out the problem. you can't get root access?
can you post a picture of what happens when you try?(printscreen)
as for the s-off, i'v heard of one other device that was shipped s-off from HTC, but that's it. u might be the second one.
guru_shastri said:
i'm having hard time figuring out the problem. you can't get root access?
can you post a picture of what happens when you try?(printscreen)
as for the s-off, i'v heard of one other device that was shipped s-off from HTC, but that's it. u might be the second one.
Click to expand...
Click to collapse
i didnt buy it directly from origin shop ,seller unlocked it but i dont know he s-off it or not
no need to screen shot its simple what happennig
just :
Run \ cmd \ adb reboot bootloader(device rebooted in white screen above "unlocked" in secound line "s-off")
\ fastboot devices(devices is listed successfully) \ fastboot boot filename.img
and it says
" cannot load "insecure.img" : no error "
when try using titanum or ram manager it say device not rooted and cant access root directory in file explorer
just it, and more try will not successfull
i try a fresh adb (sure no adb running in background) as u said but no ghange
maybe any change by seller caused problem?
Try fastboot boot insecure.img
The filename should be same as what the insecure kernel's name is. So putting filename.img might be the problem. They should correspond.
Sent from my HTC One using xda premium
kailashpchhabria said:
Try fastboot boot insecure.img
The filename should be same as what the insecure kernel's name is. So putting filename.img might be the problem. They should correspond.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I know exactly did that :
as i said in earlier post
JETSTREAM-DooMLoRD-insecure-kernel-autoroot-test2-boot.img(renamed insecure.img and copy to C:\Android )
(drive c is primary drive that Win7 is intstalled in)
but still it say:
" cannot load "insecure.img" : no error "
its seems no one can haelp me:crying:
maybe the file is corrupt?
try this:
https://dl.dropboxusercontent.com/u...MLoRD-insecure-kernel-autoroot-test2-boot.img
also, you need to search other devices forums. this forum is pretty dead, and i'm pretty sure an issue like that occurred elsewhere as well
guru_shastri said:
maybe the file is corrupt?
try this:
https://dl.dropboxusercontent.com/u...MLoRD-insecure-kernel-autoroot-test2-boot.img
also, you need to search other devices forums. this forum is pretty dead, and i'm pretty sure an issue like that occurred elsewhere as well
Click to expand...
Click to collapse
thanks for uploading file
i test new insecure but same problem:
" cannot load "insecure.img" : no error "
Please Help
mamalypro said:
thanks for uploading file
i test new insecure but same problem:
" cannot load "insecure.img" : no error "
Click to expand...
Click to collapse
Please l'm new member here I want to root my jetstream but i didn't find the files any where all links are currupted so could you please please please upload the files for me insecure kernel and root toolkit thank you very much
heres what u want threre is two link in middle of page
http://forum.xda-developers.com/showthread.php?t=1416145&page=6
DooMLoRD_v2_ROOT-busybox-su.zip - [Click for QR Code] : http://forum.xda-developers.com/attachment.php?attachmentid=901243&d=1329199186
JETSTREAM-DooMLoRD-insecure-kernel-autoroot-test2-boot.img : http://forum.xda-developers.com/attachment.php?attachmentid=901244&d=1329199186
downoad and enjoy!
and say what happend
First, sory for my bad English
I'd tried to root my kindle but I make mistake with build.prop and now it's bricked
I'd tried almost methods in this forum but adb still dont regconize my kindle,so i cant do anything like " adb shell, adb root...." to fix it
Pls help me to fix my kindle
?
tuilakhang said:
First, sory for my bad English
I'd tried to root my kindle but I make mistake with build.prop and now it's bricked
I'd tried almost methods in this forum but adb still dont regconize my kindle,so i cant do anything like " adb shell, adb root...." to fix it
Pls help me to fix my kindle
Click to expand...
Click to collapse
Whatever you do do not do a factory reset and less you are about to drop it in the mailbox
http://forum.xda-developers.com/showthread.php?t=2781665. Post 66. And Have you read and tried last three pages here ? http://forum.xda-developers.com/showthread.php?t=2588608 and check read last three pages of http://forum.xda-developers.com/showthread.php?t=2782159 and include read OP on both thoroughly... If you have follow directions to T ..Too no avail .. Then there is probably no help to be had for you I apologize... That is without fastboot capabilities and an unlocked boot loader.
I'd read this and can't get it so well
My problem is adb don't regonize my device, and I can't do anything with adb command
jimyv said:
Whatever you do do not do a factory reset and less you are about to drop it in the mailbox
http://forum.xda-developers.com/showthread.php?t=2781665. Post 66. And Have you read and tried last three pages here ? http://forum.xda-developers.com/showthread.php?t=2588608 and check read last three pages of http://forum.xda-developers.com/showthread.php?t=2782159 and include read OP on both thoroughly... If you have follow directions to T ..Too no avail .. Then there is probably no help to be had for you I apologize... That is without fastboot capabilities and an unlocked boot loader.
Click to expand...
Click to collapse
I'd read this and can't get it so well
My problem is adb don't regonize my device, and I can't do anything with adb command
?
tuilakhang said:
I'd read this and can't get it so well
My problem is adb don't regonize my device, and I can't do anything with adb command
Click to expand...
Click to collapse
you followed all the directions on how to install sdk and uninstall old drivers ect http://forum.xda-developers.com/showthread.php?t=2588608 again the last 3 pages here are about installing the sdk to get it to see ....like I said before if you have done this and follow through and not just looked at it and thought it might not work then there's probably no help for you. Sorry folks if you don't understand and know how to use this info..there is hardly no help for you because currently there is not a 1 click solution...besides a call to amazon.....
You have the JDK & Android SDK installed? Occasionally I had issues connecting to adb when recreating previous bootloops & soft bricks. It seems that it gets hung up in a stat that Windows doesn't like. The only way I could get adb to function at these times was to run a Linux distro or on a Linux machine. You can download the wubi installer for dual booting Unbuntu, which is what 99% of people that have had issues have done to regain adb access. Linux just seems to play better with Android & the Android SDK tools, which really isn't surprising.
GSLEON3 said:
You have the JDK & Android SDK installed? Occasionally I had issues connecting to adb when recreating previous bootloops & soft bricks. It seems that it gets hung up in a stat that Windows doesn't like. The only way I could get adb to function at these times was to run a Linux distro or on a Linux machine. You can download the wubi installer for dual booting Unbuntu, which is what 99% of people that have had issues have done to regain adb access. Linux just seems to play better with Android & the Android SDK tools, which really isn't surprising.
Click to expand...
Click to collapse
I installed Ubuntu but when I open it, adb is not found, pls help me 2 use Ubuntu
Second, I just asked some friends have the old kindle verson, they say I should use Factory cable, will it work ????
tuilakhang said:
I installed Ubuntu but when I open it, adb is not found, pls help me 2 use Ubuntu
Second, I just asked some friends have the old kindle verson, they say I should use Factory cable, will it work ????
Click to expand...
Click to collapse
NO. This is not an OMAP device & it does NOT use uBoot, so factory cable is useless. Try a different USB port. Also, if you installed Linux, you still have to install the Java JDK & the Android SDK. There are some guides for setting up a build environment, which is pretty much what you need to do to really be able to use the tools in Windows or Linux. Taske a look here: Setting up a build environment in Unbuntu
You don't need Python or Gnu, nor the modules, but you must sdet up the JDK & the SDK & then set the paths.
tuilakhang said:
I installed Ubuntu but when I open it, adb is not found, pls help me 2 use Ubuntu
Second, I just asked some friends have the old kindle verson, they say I should use Factory cable, will it work ????
Click to expand...
Click to collapse
as I said maybe something will come through QPST
at least QPST detects Kindle HDX 8.9 (gray logo and then a black screen) with factory cable
I also lock the device after editing build.prop
but I lack the knowledge and skills to continue this way (in order not to kill the device)
thread(chinese) http://blog.csdn.net/syhost/article/details/20435957
amazonhdx said:
as I said maybe something will come through QPST
at least QPST detects Kindle HDX 8.9 (gray logo and then a black screen) with factory cable
I also lock the device after editing build.prop
but I lack the knowledge and skills to continue this way (in order not to kill the device)
thread(chinese) http://blog.csdn.net/syhost/article/details/20435957
Click to expand...
Click to collapse
Yeah, I don't read chinese & google doesn't do a very good job translating it, so, not gonna even try.
HOWEVER, I do know that you will need the Lab126 HSUSB driver. I don't remember if this was the one I used, but it was similarly named, I think this is for the BC radio stack diagnostic bulk mode originally & worked for the HDX. http://www.driverscape.com/download/lab126-hs-usb-diagnostics-0800-(com39)
Actually, I remember playing with this & thinking it could be useful for some of the early HDX issue I ran across too: http://forum.xda-developers.com/showthread.php?t=2582142
GSLEON3 said:
Yeah, I don't read chinese & google doesn't do a very good job translating it, so, not gonna even try.
HOWEVER, I do know that you will need the Lab126 HSUSB driver. I don't remember if this was the one I used, but it was similarly named, I think this is for the BC radio stack diagnostic bulk mode originally & worked for the HDX. http://www.driverscape.com/download/lab126-hs-usb-diagnostics-0800-(com39)
Actually, I remember playing with this & thinking it could be useful for some of the early HDX issue I ran across too: http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
Ths 4 your guide and I will try with it and feed back tonight
stuck in same problem
my device still can't be recognized, still the same when it first bricked
GSLEON3 said:
Yeah, I don't read chinese & google doesn't do a very good job translating it, so, not gonna even try.
HOWEVER, I do know that you will need the Lab126 HSUSB driver. I don't remember if this was the one I used, but it was similarly named, I think this is for the BC radio stack diagnostic bulk mode originally & worked for the HDX. http://www.driverscape.com/download/lab126-hs-usb-diagnostics-0800-(com39)
Actually, I remember playing with this & thinking it could be useful for some of the early HDX issue I ran across too: http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
how can I download Lab126 HSUSB, I enter your link and download driver toolkit, but I can't see Lab126... and it's a paid license
tuilakhang said:
how can I download Lab126 HSUSB, I enter your link and download driver toolkit, but I can't see Lab126... and it's a paid license
Click to expand...
Click to collapse
You'll have to search around for it. Lab126 is the company that makes the HDX. That page only shows you the various driver names, the correct com port & identifies what device you want to see in device manager once you get QPST set up properly.
GSLEON3 said:
You'll have to search around for it. Lab126 is the company that makes the HDX. That page only shows you the various driver names, the correct com port & identifies what device you want to see in device manager once you get QPST set up properly.
Click to expand...
Click to collapse
I had google it and I can't find any lnk for this driver, can you give me this driver or link I can down
tuilakhang said:
I had google it and I can't find any lnk for this driver, can you give me this driver or link I can down
Click to expand...
Click to collapse
try it http://www.mediafire.com/download/xnjxkd49dn9d75j/QualcommDrv.zip
or it http://kindle-sdk.s3.amazonaws.com/2ba63011a73a0a0d0f35e001696677ec92a825cb.zip
amazonhdx said:
try it http://www.mediafire.com/download/xnjxkd49dn9d75j/QualcommDrv.zip
or it http://kindle-sdk.s3.amazonaws.com/2ba63011a73a0a0d0f35e001696677ec92a825cb.zip
Click to expand...
Click to collapse
ths 4 your sharing, but it's not work with me too, I has tried with 2 laptop and 3 or 4 cables, but it's not work too, don't have any signal when I connect it. I can't understand why I can't be
tuilakhang said:
ths 4 your sharing, but it's not work with me too, I has tried with 2 laptop and 3 or 4 cables, but it's not work too, don't have any signal when I connect it. I can't understand why I can't be
Click to expand...
Click to collapse
if kindle bricked (for example after a failure edit build.prop - gray logo and black screen), pc not detect device with standart microusb cable, driver can not be installed, adb not working.
but if use factory cable (buy or make), then the device connect as a usb bulk. you may install the first driver to it.
further steps to recovery does not exist yet
amazonhdx said:
if kindle bricked (for example after a failure edit build.prop - gray logo and black screen), pc not detect device with standart microusb cable, driver can not be installed, adb not working.
but if use factory cable (buy or make), then the device connect as a usb bulk. you may install the first driver to it.
further steps to recovery does not exist yet
Click to expand...
Click to collapse
So, What shoud I do to connect my kindle?
tuilakhang said:
So, What shoud I do to connect my kindle?
Click to expand...
Click to collapse
if kindle bricked (gray logo, thor not installed), just wait until a way to recover