Does anyone have any experience with removing a damaged charging port/flex cable? I made a thread about a week ago saying that mine was messed up and one of the wire strip on the charging slot was broken, but and didn't allow it to connect to my computer for file transfer. I talked to ATT and they said the store couldn't do anything and that I would need to call in. I don't want to take the risk of a huge charge, and found a single order part here www.etradesupply.com/oem-samsung-galaxy-note-sgh-i717-charging-port-flex-cable-ribbon.html
It is cheap, and I have e removed the back of my Note before, and removed most of this piece except for the ribbon, and which I have no idea how to. Are there any resources out there to help me with this? I don't want to mess up a new part trying to install this one.
(PS how do I start a new thread on the desktop site? I couldn't find anywhere to do it and SwiftKey isn't faster than using a real keyboard on my PC lol. I am obviously new)
Sent from my SAMSUNG-SGH-I717 using xda premium
Youtube is your friend. Watch the video and see the steps it takes. If you feel it's too much then try searching on your local Craigslist for a shop that may be able to fix it.
http://youtu.be/pD9R-YUT69Q
MrEous said:
Youtube is your friend. Watch the video and see the steps it takes. If you feel it's too much then try searching on your local Craigslist for a shop that may be able to fix it.
http://youtu.be/pD9R-YUT69Q
Click to expand...
Click to collapse
Thanks a lot! It totally slipped my mind to check out YouTube.
Sent from my SAMSUNG-SGH-I717 using xda premium
Bought 1 from ebay. Will try to do it myself when it's arrived.
Sent from my phablet ★★★Galaxy Note★★★
Good luck. I did it myself as well. It is not that difficult.
Sent from my MB860 using Tapatalk 2
Has anyone tried replacing just the digitizer on our phones? My friend's LCD is fine, it's just the glass that is cracked.
On my old HTC HD2 the digitizer was glued to the LCD, so swapping it out was pretty tough. I'm wondering if it's the same for this phone.
So it didn't charge also?
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
Snarksneeze said:
Has anyone tried replacing just the digitizer on our phones? My friend's LCD is fine, it's just the glass that is cracked.
On my old HTC HD2 the digitizer was glued to the LCD, so swapping it out was pretty tough. I'm wondering if it's the same for this phone.
Click to expand...
Click to collapse
Yup, will be rough, it's glued.
Lcd and digitizer are fused on the note as well. Cheapest I seen it go for is like 250
Sent from my SAMSUNG-SGH-I717 using xda premium
gagejbond said:
Does anyone have any experience with removing a damaged charging port/flex cable? I made a thread about a week ago saying that mine was messed up and one of the wire strip on the charging slot was broken, but and didn't allow it to connect to my computer for file transfer. I talked to ATT and they said the store couldn't do anything and that I would need to call in. I don't want to take the risk of a huge charge, and found a single order part here <clipped URL because XDA won't let me quote it>
It is cheap, and I have e removed the back of my Note before, and removed most of this piece except for the ribbon, and which I have no idea how to. Are there any resources out there to help me with this? I don't want to mess up a new part trying to install this one.
(PS how do I start a new thread on the desktop site? I couldn't find anywhere to do it and SwiftKey isn't faster than using a real keyboard on my PC lol. I am obviously new)
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Did you receive the part from that supplier? Was it the correct part? I ask because I need the same part for my Note. (Samsung told me that is not a part covered under warranty)
JeremyLC said:
Did you receive the part from that supplier? Was it the correct part? I ask because I need the same part for my Note. (Samsung told me that is not a part covered under warranty)
Click to expand...
Click to collapse
Just to follow up on my own post. I ordered the part, it arrived quickly, and it was DOA Waiting to hear from customer service now.
Be careful doing this I found the new part had the wrong antenna and my reception was gone afterward. Ended up replacing my phone because of that.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I tried 3 charging ports from ebay,all from diffrent sellers and they were all DOA... Check out parts4repair, I ordered mine and 2 weeks later, my phone is fixed!
http://www.parts4repair.com/samsung-galaxy-note-i717-at-t-dock-charging-port/
I replaced mine, easy, just don't loose the screws, took about 5-10min
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
endine said:
I tried 3 charging ports from ebay,all from diffrent sellers and they were all DOA... Check out parts4repair, I ordered mine and 2 weeks later, my phone is fixed!
http://www.parts4repair.com/samsung-galaxy-note-i717-at-t-dock-charging-port/
Click to expand...
Click to collapse
its took you that long to get the replacement port?
just replaced mine as well with the ebay one from ezletroniks(or something like that). $15 shipped, arrived in less than a week from California to Wisconsin.
Took around 10 minutes to replace. Charging up fine again which makes me very happy.
So it seems apparent that this is not a singular occurrence by any means, which is a little disheartening. But I just wanted to chime in and say that I'm currently on my 3rd charge port.
Fortunately, there's an awesome place a few miles away (I would trust the tech there with my life...he's fixed everything I've thrown at him thus far) that has been able to replace the part for me each time - but every damn time, it works perfect for about 2 weeks and then it goes back to the way it was before, which is always the same symptom: phone doesn't charge (or stay connected to the PC) unless I push the phone UP from back, and simultaneously push the end of the cable DOWN. And even then, sitting perfectly still, I get a sporadic connection.
Needless to say, the 2 extra OEM batteries/chargers (that you can charge just the battery with) and ADB over WiFi have become my best friends
So I'm wondering: (a) has anyone else had this problem multiple times like I have? And (B) has anyone else experienced the same thing as far as the "manual" method I have to use to keep it charging? I'm trying to, as much as possible, rule out the possibility that there's something else wrong with it
Replaced mine
Got the part, took about 15 minutes to replace. Hardest part was prying the bezel off the phone.
After replacing, putting it back together and making sure everything worked, I put the old port under a 30X loop to look at it.
on the board side, where the pins exit the plug, and go to the circuit boar, if you flex the port, I could see the pins LIFTING
off the pins on the board at the solder connection. If I had a micro solder iron & steady hand it would be a simple fix, but
since it took a 30X loop just to see it, and I don't have a micro iron, it was easier to spend less than 15 bucks, and 20 minutes
time to replace the thing :victory:
p51d007 said:
Got the part, took about 15 minutes to replace. Hardest part was prying the bezel off the phone.
After replacing, putting it back together and making sure everything worked, I put the old port under a 30X loop to look at it.
on the board side, where the pins exit the plug, and go to the circuit boar, if you flex the port, I could see the pins LIFTING
off the pins on the board at the solder connection. If I had a micro solder iron & steady hand it would be a simple fix, but
since it took a 30X loop just to see it, and I don't have a micro iron, it was easier to spend less than 15 bucks, and 20 minutes
time to replace the thing :victory:
Click to expand...
Click to collapse
That's actually exactly what the repair shop told me was wrong with it...although I couldn't recall exactly until you said this. I'm pretty sure he's just re-soldered if each time, and never actually replaced the board.
So to a non-hardware person...is that problem due to faulty manufacturing/poor quality parts on the Samsung end? Or does that just end up happening to all devices with a MicroUSB connection as they get used?
p51d007 said:
Got the part, took about 15 minutes to replace. Hardest part was prying the bezel off the phone.
After replacing, putting it back together and making sure everything worked, I put the old port under a 30X loop to look at it.
on the board side, where the pins exit the plug, and go to the circuit boar, if you flex the port, I could see the pins LIFTING
off the pins on the board at the solder connection. If I had a micro solder iron & steady hand it would be a simple fix, but
since it took a 30X loop just to see it, and I don't have a micro iron, it was easier to spend less than 15 bucks, and 20 minutes
time to replace the thing :victory:
Click to expand...
Click to collapse
I have a couple of guesses. One picture showed the connector was loose. It looks to me that the case tabs aren't soldered in. The other thing is I have one cable where the metal part sticks so far out that the plastic never touches the phone. It like sticking a screwdriver in the socket because you can wiggle the socket up and down. I now use a cable the plastic part touches the phone and doesn't wiggle the socket very easily. Wiggling any wire will eventually break it because of metal fatigue.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Related
Anyone else have this issue. The usb cable comes apart on the asus end(see pic)
P.s. this has never been abused and was treated with the the greatest of care
http://imgur.com/AOPWP
Nope, maybe try a tiny dab of superglue?
Well I know it is an easy fix I just thought it was kinda weird and wanted to know if I was the only one who had this problem
Yup happened to me. But on the other side. The USB side. Cant sseem to attach the pic from my tfp
i had this happen to me right out of the box! plugged the device in to charge then unplug after full charge then this happened.
susko said:
Anyone else have this issue. The usb cable comes apart on the asus end(see pic)
P.s. this has never been abused and was treated with the the greatest of care
http://imgur.com/AOPWP
Click to expand...
Click to collapse
Yes! It's a piece of crap! And I tried to RMA to Asus but they want the bad one back and then they'll send out a new or fixed one. So how is a person supposed to charge the tablet with no power cord? Very disappointing, Asus! They've sent me several follow up surveys to the phone calls and emails and I've told them how I feel about this. They don't seem to respond after that... Haha! Oh, well. The superglue route is probably the best way to go, anyhow.
My cable came apart like that the first time I used it. I carefully removed it from the connector on my tablet so as not to damage any wires, and then pushed the cap back on until it clicked and it hasn't come off since.
I think the problem is that the black cap isn't properly seated over the connector on some charging cables so the little clips on the inside never engaged. I have a half dozen chargers for the TF Prime and 3 were like this.
This is definitely something that might scare you the first time you try to unplug your connector, but it isn't a huge problem unless you rip out the wires or something.
My wife's did this the first time we unplugged it. I used a few drops of super glue on it and it has never come apart again. Mine on the other hand never had the issue. I think there was a batch of the plugs that they never put the glue on them so they weren't sealed when they got shipped. Put a few drops of glue on it and seal it up and enjoy the full use of the USB plug
Sent from my Transformer Prime TF201 using xda premium
Hi guys,
So far I have used 3 chargers. A Verizon green 10ft long charger, the charger for my Nexus 7, and a Verizon car charger.
Basically when I plug any of these chargers in it will show it is charging for a split second, then it'll go away. So in order for it to charge, I have to push the charger in really hard, push it down, or bend it to the right. If I bend it to the right, when I let go, it stops charging. Sometimes I can get it at the right angle to keep it there, but I come back later and see that it isn't charger. Also if I push it in really hard, bending it to the right stops charging it.
The Verizon car charger has been the best for me (not as bad but I still have to bend it), but I use my nexus 7 charger for it most of the time.
This is super annoying, how it's real hard to get it to start charging and even harder to keep it. None of the pins on my chargers look crooked, nor inside my phone. I don't know if there is a fix for this, I might just take it to Verizon.
Anyone with the same problem or know of a fix out there? Thanks!
Hardware return to service centre .
This is I9300 forum advice / firmware from here may brick a non I9300 see sticky .
jje
I've had that problem to and with my fiancée's s3, I need to push it in quite hard to get it to start charging but my girlfriends s3 I need to do almost the exact same as what you've described bending it pushing it, I think we where on our 5th charger for hers before it just refused to charge anymore it is definitely a problem with the phone we sent hers back and it was fixed under warranty, we were told by T-Mobile that it was a common fault with the s3 but it was repaired and now works perfectly, we have the international models. The only fix is it to send it back unfortunately hope this helps.
jaggythistle said:
I've had that problem to and with my fiancée's s3, I need to push it in quite hard to get it to start charging but my girlfriends s3 I need to do almost the exact same as what you've described bending it pushing it, I think we where on our 5th charger for hers before it just refused to charge anymore it is definitely a problem with the phone we sent hers back and it was fixed under warranty, we were told by T-Mobile that it was a common fault with the s3 but it was repaired and now works perfectly, we have the international models. The only fix is it to send it back unfortunately hope this helps.
Click to expand...
Click to collapse
This is a Verizon certified phone. I only got it about a month ago. I'm a little scared to get a replacement. I actually had a Rezound before, and I went through 4 malfunctioning Rezounds and weeks of not having a phone before I called up verizon and they offered to switch my Rezound for a certified S3. It's great in all other ways, that's why I'm afraid to replace it with a phone that has problems with using the phone itself.
Okay, what is going on here. I made the cord tight and angled it to get a charge. It was at 42% last night when I started charging. I got up and the red light was still on, but the phone was still at 42%. It seems only angling to the right will it charge normally.
This is so annoying. So it's the charging port on my phone then? Maybe I should get the manufacturers charger, maybe I'm just using chargers not really compatible with my S3? Because my car charger works as soon as I plug it in. I mean if I turn in my car a lot it will stop charging and I will have to readjust the connection, but it's not nearly as bad as the charger I'm using at home.
Get it replaced and done with, mate. It's hardware problem. And not with the charger.
Sent from my GT-I9300 using xda app-developers app
jaggythistle said:
I've had that problem to and with my fiancée's s3, I need to push it in quite hard to get it to start charging but my girlfriends s3 I need to do almost the exact same as what you've described bending it pushing it, I think we where on our 5th charger for hers before it just refused to charge anymore it is definitely a problem with the phone we sent hers back and it was fixed under warranty, we were told by T-Mobile that it was a common fault with the s3 but it was repaired and now works perfectly, we have the international models. The only fix is it to send it back unfortunately hope this helps.
Click to expand...
Click to collapse
How long did it take for you to receive your phone back? I'm sending my phone to Samsung for repair. Sounds like it's going to take about 2 weeks, which is unfortunate. I just went through that
There is a simple fix!!!
I previously had to post this to a different forum so im posting the solution to this forum.
This issue can be fixed easily, you just have some stuff to fix it with. It's not only the connectors that's dirty, It's also the bottom of the micro usb port, it can easily be blocking the the connector from connecting all the way in. Here's how i fixed mine:
The first thing you'll need is some rubbing alcohol
Some Q-Tips.
The second thing you'll need is a very small sewing needle (go ask your grandma for one )
The third optional thing you'll need is some compressed air WITH a straw thing at the end
First off, remove the battery of the phone and set it somewhere.
Then get your sewing needle and dip it into the rubbing alcohol (helps clean the residue).
Then DELICATELY take the needle and clean ALL residue on the bottom of the port. Do this and make sure ALL residue is gone.
Then take the Q-tip and dip it in the rubbing alcohol.
VERY GENTLY take the Q-Tip and put very little pressure against the charging port.
Take the needle and go for a second try for the residue and let it air dry, OR get the compressed air and CAREFULLY blow out the rubbing alcohol and dust out of the charging port.
Put the battery when dry and turn on phone.
This will effectively clean the charging port AND the bottom of the port.
This has probably an 80% chance of working. It worked for me!
Plug it in and see if that works!
I'M NOT RESPONSIBLE IF YOU MESS UP AND SCREW UP YOUR PHONE!!!!!
I hope this helped everybody
Before I begin, if there is already a thread outlining this particular problem, I apologize in advance.
Yesterday my Truesmart was in the charging cradle sitting on my desk, not realizing it, I accidentally opened a draw which pulled on the USB cable, dragging my Truesmart off of the desk and onto the floor. My truesmart fell about 2 feet and is fine, but the charging cradle will no longer charge it. I would assume that something broke in the cradle when it fell, which justifies the pathetic quality of it, although there is no visual damage on the cradle and when shaken nothing rattles around inside of the cradle.
My question is what should I do now? I am almost certain that it is the cradle that is the problem and not the Truesmart or the USB as the watch will still turn on and the USB will charge other devices. I have tried different power sources and different USBs and I only have one cradle. Is there anything I should troubleshoot in order to try and get the cradle working? Or is is possible that the problem is with the watch?
Any assistance would be greatly appreciated.
The spring contacts in the cradle may have gotten smushed in a bit by the impact. Try prying them up gently with like a needle.
Otherwise, the solders connecting the microUSB connector inside the cradle might have failed. They have been reported to be of poor quality on another owner's cradle with cold solders. Try resoldering them if probing them shows them not good connections anymore.
Thirdly, maybe your USB cable itself was damaged in the drop. Test it too.
Sent from my Nexus 5 using Tapatalk
I tried what you suggested with the needle and it didn't make any difference, they seem to be at the right position anyway.
I have a feeling it might be the solders, as it is possible that the sudden shock of the microUSB inside of the port caused something to break. Unfortunately I do not have any knowledge of soldering nor the equipment to do it. I wouldn't know how to open up the cradle without breaking it anyway.
I already tested the USB cable, it charges anything else, and I have tried other USBs with the Truesmart to make sure that it is infact the cradle.
I have sent Magan (may or may not have spelt her name right) two emails and have received no response.
Asking omate for another cradle is useless. Omate is focusing on shipping units not cradles. I know this because my cradle stopped working also. The solder on the female USB plug had failed. I took it into a local electronic repair shop and they resoldered a new plug on. They also asked me what doll or store I pitched the charger at.
I've been thinking of replacing the spring contacts with actual pogo pins. It's silly that the charger doesn't utilize them to begin with.
Sent from my GT-N5110 using Tapatalk
rhineymac said:
Asking omate for another cradle is useless. Omate is focusing on shipping units not cradles. I know this because my cradle stopped working also. The solder on the female USB plug had failed. I took it into a local electronic repair shop and they resoldered a new plug on. They also asked me what doll or store I pitched the charger at.
Click to expand...
Click to collapse
I am aware but I figured it was worth a shot since my order was missing a keychain that I was told would ship "soon".
I might look into taking it into a shop, how much did it cost you to do that? And I didn't understand your last sentence.
He mistyped "dollar store".
Apparently they have such cheap budget shops up in Canada too. I get my colored USB cables from them, they say, " Made in China" on them and generally last a couple of weeks.
Sent from my Nexus 5 using Tapatalk
Have you had the back of the watch off? If so loosen all 4 screws then tighten the 2 where the charge pins are first - then tighten the other end, where the buttons and camera is, last. I had an issue where the watch would not charge after reinstalling the back. I think the internal contact pins barley contact the flexible plastic copper pads. I originally crisscrossed tightened the screws and it wouldn't charge. If I have to install the back cover again I will most likely add a thin layer of something underneath the cable pad to help close the gap and provide a more solid contact for the internal pins. I could visibly see where there was maybe 2 out of the 4 pins making adequate contact.
Oops yes I ment dollar store. It didn't cost me much. $10 but the guy told me that it wouldn't last long, which it didn't, it stopped charging my ts today. He told me that its cheap, pure and simple. I was suppose to receive a spare that I paid for. When I asked about it I was told they won't ship it until after all KS and preorders were shipped. Omates way of telling me that I'm SOL
rhineymac said:
Oops yes I ment dollar store. It didn't cost me much. $10 but the guy told me that it wouldn't last long, which it didn't, it stopped charging my ts today. He told me that its cheap, pure and simple. I was suppose to receive a spare that I paid for. When I asked about it I was told they won't ship it until after all KS and preorders were shipped. Omates way of telling me that I'm SOL
Click to expand...
Click to collapse
I realized you meant dollar store shortly after posting lol, unfortunately I have even seen nicer chargers at the dollar store. $10 isn't bad but I guess at that price it makes sense to get a new charger if possible. I love how I am fortunate to have a semi-working watch but can't even use it because I don't have a working charger. Thanks for all of your help Omate -.-
SkyHawkTech said:
Have you had the back of the watch off? If so loosen all 4 screws then tighten the 2 where the charge pins are first - then tighten the other end, where the buttons and camera is, last. I had an issue where the watch would not charge after reinstalling the back. I think the internal contact pins barley contact the flexible plastic copper pads. I originally crisscrossed tightened the screws and it wouldn't charge. If I have to install the back cover again I will most likely add a thin layer of something underneath the cable pad to help close the gap and provide a more solid contact for the internal pins. I could visibly see where there was maybe 2 out of the 4 pins making adequate contact.
Click to expand...
Click to collapse
I had the back off of the watch once, after putting it back on it worked fine up until I dropped it. The watch will turn on, it just won't charge. I will try your suggestion anyway when I have my watch around though. The assembly of the watch is disgustingly poor, there is what looks like dried glue seeping out of the SIM slot of my watch. Very lucky to have no issues with buttons or pin contact and etc.
Agent. said:
I realized you meant dollar store shortly after posting lol, unfortunately I have even seen nicer chargers at the dollar store. $10 isn't bad but I guess at that price it makes sense to get a new charger if possible. I love how I am fortunate to have a semi-working watch but can't even use it because I don't have a working charger. Thanks for all of your help Omate -.-
I had the back off of the watch once, after putting it back on it worked fine up until I dropped it. The watch will turn on, it just won't charge. I will try your suggestion anyway when I have my watch around though. The assembly of the watch is disgustingly poor, there is what looks like dried glue seeping out of the SIM slot of my watch. Very lucky to have no issues with buttons or pin contact and etc.
Click to expand...
Click to collapse
the problem ive had with the charger is the female usb port. its very loose. i wonder if we will ever see the xtra things we paid for, xtra chargers, tshirts sd cards. its bad enough that the watch is a mess, but to have a propriatiery charger is just icing on the cake. theres not way of fixing it. well there is,but it only lasted a week. the guy who fixed mine laughed at me and told me you get what u pay for. This is only partly true, the charger was $5 but isnt worth $1
You could make a charger with a dollar store USB charging cable you cut up to expose the +5 and gnd wires, then tape them to the right pins on the back of the watch, carefully.
Sent from my Nexus 7 using Tapatalk
rhineymac said:
the problem ive had with the charger is the female usb port. its very loose. i wonder if we will ever see the xtra things we paid for, xtra chargers, tshirts sd cards. its bad enough that the watch is a mess, but to have a propriatiery charger is just icing on the cake. theres not way of fixing it. well there is,but it only lasted a week. the guy who fixed mine laughed at me and told me you get what u pay for. This is only partly true, the charger was $5 but isnt worth $1
Click to expand...
Click to collapse
I'm pretty sure mine is the female USB port too, as my watch was plugged in when it fell so I assume the shock of the male USB caused it to break. Your guess is as good as mine as to if they ever plan on actually fulfilling their promises, they have done a pretty crummy job thus far. The charger is absolute junk, at least if we had the charging cable they initially promised we might be able to work with it a bit more.
trent999 said:
You could make a charger with a dollar store USB charging cable you cut up to expose the +5 and gnd wires, then tape them to the right pins on the back of the watch, carefully.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
That isn't a bad idea for a temporary fix but the fact that it even comes down to doing something like that is absurd in my opinion, the charger should have been done and ready while they were dealing with all of the other BS issues.
Well, remember that for most owners the charging cradle they received works fine. It is not that poorly designed - mostly failures reported have been due to shoddy assembly. Similarly careless assembly has been reported on the watch itself in various areas.
I got my extra charger I ordered via Kickstarter, included in the package, but have never tested it nor needed to. I also figured out a way to charge the spare battery with an Anker universal charger, just in case. That charger came free with a couple of VGNexus batteries I bought from Amazon.
You might have better luck with the USB port repair staying fixed if you support its attachment to the board, such as it is, with an application of SuperGlue prior to resoldering the connections.
Holding a cable connector in place via only the contact solders would always be a bad design though.
Sent from my Nexus 7 using Tapatalk
Right guys I'm so ticked off right now. I bought two adapters. One a couple months ago. I lost it. Another one (the deff one from clove) a few weeks ago. I also lost that. Because they were both £10+ each its pissed me off a bit more.
My question is has anyone bought one which is good and has a strong magnet? I was considering these Sony cables that are on eBay, obviously fakes for the price they are but I'm not sure. What's your guys opinions?
Sent from my D6503 using Tapatalk
been using the magnector x for quite a while now and haven't had any issues
http://www.amazon.com/gp/aw/d/B00JEN5S6A/ref=mp_s_a_1_1?qid=1411846758&sr=8-1&pi=AC_SX110_SY165_QL70
Sent from my Xperia Z2 using XDA Free mobile app
Careful.....
.....
http://www.ebay.com/itm/New-Aluminu..._PDA_Cables_Adapters&var=&hash=item1e8ea39e32
Bought this one 4 month ago; works well but be careful not to attach it the wrong way!!!
It will instantly discharge your battery and/or a fried motherboard as happened to me here :
http://forum.xda-developers.com/xperia-z2/help/q-t2846982/post55359250#post55359250
Hi, I recevied a magnetic cable bought on ebay (10 euro). I tried it yesterday for the first time and after 6hours of charger the battery level was 52%. The magnetic connection is no strong and I think that cable doesn't work properly.
I will try to buy the adaptor suggest by @tonysunshine
i brought this one over 6 months ago works perfect only goes on one way says + / - on the plug if put on wrong way phone will turn itself off so not sure how MotoXoom fried his ?
+ goes at the top
http://www.ebay.co.uk/itm/Magnetic-...9H-Reliable-/201075389377?hash=item2ed106f3c1
i haven't used one myself yet. but a friend bought magnector x cable. and it seems to work pretty fine. magnet is strong charges quick. but not as fast as official dock or usb. but it seems pretty nice as most of the cases are not dock compatible.
http://www.amazon.com/Magnector-Per...qid=1411902689&sr=8-1&keywords=magnector+x+z2
I agree the magnector x is pretty good and the magnet is not all that bad, one thing to mention is that the magnector x is not compatible with all cases as the sides may disconnect the magnet.
My first one was the magnector-x but I found with that when I picked up the phone it would just fall off. Same with the deff. The problem I had with that is the fact that the charger wire seemed to be in opposite direction to the connector and therefore ended up not sitting correctly
Sent from my D6503 using Tapatalk
I don't understand what you people doing with these third party cables. don't you know that there is an original cable from Sony Coded EC21???
Sent from my D6503 using XDA Free mobile app
Yeah which is not available in all regions. Otherwise I'd definitely get that. I firmly believe in using genuine accessories and not third party
Sent from my D6503 using Tapatalk
killalot said:
i brought this one over 6 months ago works perfect only goes on one way says + / - on the plug if put on wrong way phone will turn itself off so not sure how MotoXoom fried his ?
+ goes at the top
http://www.ebay.co.uk/itm/Magnetic-...9H-Reliable-/201075389377?hash=item2ed106f3c1
Click to expand...
Click to collapse
MotoXoom bought a charger cable that does not have the cut off feature or detects that the charge has been connected the wrong way. So he basically shorted out hsi phone because it did not cut out. This was NOT a magnector-x adapter
The cable i brought doesn’t have a cut off feature? The phone has it, if you put a positive on a positive the phone shuts off.
As far as I know there is no protection whatsoever except for the mechanical small asymmetry (look at the phone connector and compare the "lower" with "upper" plastic tabs).
Certainly there is no electronic protection in the phone. Some phones survived "reverse connection", some not.
I don't think it can be any electronic protection in the cable or charger; they are designed to give out 0.5-1-2A and certainly that are most likely enough to fry the phone. MAYBE some wimpy chargers aren't capable of that but it's better to assume all are dangerous.
Has anyone ever tried one of these http://www.ebay.co.uk/itm/161404030047?_trksid=p2060778.m1438.l2649&ssPageName=STRK:MEBIDX:IT or http://www.ebay.co.uk/itm/Magnetic-...lePhonesCasesPouches&var=&hash=item4d2641788c
Thanks!
Yeah, i have one of those at home... black and shiny blue when plugged.
They work. But i find the charging speed lacking.
well the magnetic charging lasted me a few weeks and now the magnetic charge port is slowly coming off! *sigh* this is most definitely the last sony phone i purchase
A|ex said:
well the magnetic charging lasted me a few weeks and now the magnetic charge port is slowly coming off! *sigh* this is most definitely the last sony phone i purchase
Click to expand...
Click to collapse
Can you tell us the "week" of the device? You can go under the right flap, there's some plastic tray (similar to the sim tray on the left) there should be the IMEI and some other info, including something like 14W15 (meaning for example 2014 week 15). I've heard the ones after 18 shouldn't have the "unglued magnetic port" problem.
But yes, I really had to get the device for the 2 feature missing on most other phone (waterproof with external no-flap-removal charging and lanyard attachment point) but the S5 would've been better in every other way. Including the fact that 5>2 and it seems it counts. Probably Z5 would be perfect, if we ever get to that.
I have a pain in the bum case on atm and it will some work removing it. I just had another look at the magnetic port and yes it can be completely removed by just the magnet. From looking at the port there appears to be two pins and what appears to be some glue in the middle.
Could I not just super glue the port back into the phone?
If I look closely enough I can see that pressing down on the magnetic port opens up a smallish gap which I would assume would let water in.
My magnetic port moves too if a push it (even a little). And it was supposed to be from the new fixed batches.
WTF Sony? Metal and glass phone, parts held together by spit.
tonysunshine said:
been using the magnector x for quite a while now and haven't had any issues
http://www.amazon.com/gp/aw/d/B00JEN5S6A/ref=mp_s_a_1_1?qid=1411846758&sr=8-1&pi=AC_SX110_SY165_QL70
Sent from my Xperia Z2 using XDA Free mobile app
Click to expand...
Click to collapse
I have this as well, it's the only adapter that actually charges my phone in my car. Even the stock dock doesn't work! Very good magnet as well.
Hi All,
I have a Nokia 7.1 that stopped charging. I cleaned out the charge port and tried different cables and adapters but nothing worked. I've since come to find out that it's a common enough problem that lots of people post about it on Nokia's support forum with no other option other than taking it to a service center. I'm in the USA and there's not a single service center in my state so I decided to try and replace the daughter board myself. I've done this kind of thing before on other phones, my Nexus 4 was a frankenstein's monster by the time I was done with it.
My problem is I can't find a reliable source for a quality part. There's tons of replacements on amazon, ebay, aliexpress and other random sites but all the ones I've read had issues for connectivity of cell service or wifi. Does anyone know where I can source a new daughter board for this phone?
Any help is greatly appreciated.
Thanks!!
I went through the same issue.
Bought another type c charging port on Amazon, it still works.
Awesome! Thanks for the reply. Did you go with one of the ~$10 ones or one of the ~$20 ones?
My 7.1 developed the same problem. What is the root cause? Is it mechanical problem of the connector pins worn out/oxidized? It does seem to be a mechanical problem since I can still wiggle the cable to make it charge for a while. What puzzles me is that the USB-C has inherent redundancy with 4 power and 4 ground pins that it should not easily fail. I have a phone with the old micro-USB and the charging still works flawlessly.
lejaune said:
My 7.1 developed the same problem. What is the root cause? Is it mechanical problem of the connector pins worn out/oxidized? It does seem to be a mechanical problem since I can still wiggle the cable to make it charge for a while. What puzzles me is that the USB-C has inherent redundancy with 4 power and 4 ground pins that it should not easily fail. I have a phone with the old micro-USB and the charging still works flawlessly.
Click to expand...
Click to collapse
I'm not sure. It does seem to be a mechanical problem, but I've seen some repair videos where they open it up and just run a soldering iron over the connector pins on the board and it starts working again. I've ordered a daughter board and a replacement back glass panel in case I break it trying to get it off. I'll update after I get the parts and open it up to see if it works.
The board I ordered was this one from Amazon Smile:
https://smile.amazon.com/gp/product/B08166DLDC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
It seems like the ~$10 boards are missing some chips that the ~$20 ones have, at least according to the pictures that were uploaded with the listing.
@bpowdhar, Thanks for the quick reply. I did order a connector board on Ebay, and it looks to be of the ~$10 variety. I'll see how it works when it gets here. I will also try the "melting the solder" trick without removing the connector first. If that works, I'll leave the old board in place just to minimize the risk.
So I received the USB-C charging board and replaced the bad one. Now, it seems to be charging normally. It took some work to open the back cover by heating to soften the glue/tape around the edge. I then used an a xacto knife to pry the corner open followed by dragging an old credit card to slowly separate the cover. Once it's open, everything went smoothly. Just watch one of several Youtube video clips to know what to expect. You do need a small Philips screwdriver and a #5 Torx driver. You need to lift a ribbon cable and a micro coax cable from the board. Just don't forget to put them back on to the new board. I didn't bother to fix the old board by re-solder the connector pins because they are way too small for my solder iron.
I rely on the existing glue/tape to glue the cover back, but I'm sure it's not as water/dust proof as before, so I may redo that part to clean the old tape out and use the new tape or glue when I have more time.
I do noticed a couple of parts missing on my $9 board. I don't know if they have anything to do with regulating the high voltage fast charging. I usually charge the phone with a 5V adapter, and I will stick to 5V, at least for now.
Thanks for the update! I'm still waiting for my board to arrive from Amazon. It was delayed with the new shipping date anywhere from Nov 5 - Nov 10 and it still hasn't arrived. It sucks because tracking info shows that it arrived at my area's sorting facility on Oct 29 and left it on Nov 4. So it should have only taken a day or two to get to my local post office and to my house. I'll update when it finally gets here.
I know it's been a couple of months, but I finally got the part and swapped it out yesterday. The battery was completely dead so I plugged it in to charge and left for the day. I came back to it this morning and it's at 100% battery! I'm so happy now! I've attached a couple of pictures showing the old board (with the red dot) and the new one. So far no connectivity issues, but I'll give it a couple of weeks to see if anything changes.
A couple other notes:
It was surprisingly easy to get the back glass off. I used a heat gun on low and ran it around the perimeter for a couple of minutes and a utility knife to cut the adhesive. This part was what I was most apprehensive about tackling.
The fingerprint sensor comes off the same way, apply heat and press / pry away from the glass to reuse.
If I had to do it again, I'd buy the tube of sealant. The replacement glass came with a set of narrow adhesive strips and those were a pain to deal with.
Thanks to everyone who contributed to the thread. Hopefully this helps someone else.