Related
Ok so i bought the vibrant, unlocked it, and inserted my att 3g sim. the issue is im only getting edge speed when my phone is 3g capable. any ideas to correct that? Like creating an apn of some sort?
Thanx!
im about 50 percent sure that at&t and t-mob use different frequencys or something for their 3g signals so they are not compatable, same thing happend with the nexus one and its 3g on at&t if my memory is correct
bweed83 said:
im about 50 percent sure that at&t and t-mob use different frequencys or something for their 3g signals so they are not compatable, same thing happend with the nexus one and its 3g on at&t if my memory is correct
Click to expand...
Click to collapse
I second this.
Agree. U need to swap it for samsung captiva. The att galaxy s.
Sent from my SGH-T959 using XDA App
my only working theory is that the 1900mhz freq isnt as widespread as the 850mhz freq, as the vibrant uses 1900. (i think). so that may be it. but i ask only because some commenter on a diff forum mentioned the need to create a 3g apn.
ps. the captivate is too boxy for me. idk why att changed it
Those are at&&&-t frequencys tmob is 1700 and 2100 I think so if our antenna only picks up those iy wont ever work on at-t's network
Sent from my SGH-T959 using XDA App
muncher879 said:
my only working theory is that the 1900mhz freq isnt as widespread as the 850mhz freq, as the vibrant uses 1900. (i think). so that may be it. but i ask only because some commenter on a diff forum mentioned the need to create a 3g apn.
ps. the captivate is too boxy for me. idk why att changed it
Click to expand...
Click to collapse
It's not how widespread it is. They use different frequencies so your phone won't pick up the ATT 3G signals at all. Edge is 2G.
But I've seen one person on the forum claim that he did it. You can pm him/her on how to do it.
Sent from my SGH-T959 using XDA App
The Vibrant is capable of AT&T's 3G over the 1900mhz spectrum... if you live in a area where AT&T is only using the 850mhz spec... you will not get 3G.
muncher879 said:
Ok so i bought the vibrant, unlocked it, and inserted my att 3g sim. the issue is im only getting edge speed when my phone is 3g capable. any ideas to correct that? Like creating an apn of some sort?
Thanx!
Click to expand...
Click to collapse
HEY, don't listen to these guys. You can get both wcdma 1900 and wcdma 850 on the vibrant, don't worry, you will be able to get at&t 3G on your phone!
I'll show you how when I have time, maybe this weekend.
eortizr said:
The Vibrant is capable of AT&T's 3G over the 1900mhz spectrum... if you live in a area where AT&T is only using the 850mhz spec... you will not get 3G.
Click to expand...
Click to collapse
you gave the poor guy wrong information, the vibrant is capable of at&t 3g over 1900 AND 850
Having the same issue
I also am only getting Edge signal on my unlocked vibrant. When I run a 1MB speed test at mobilespeedtest.com it says I am downloading at 2581 kbps which, according to their chart, is a little more than the average 4g speed. Very weird. I also can't download any apps but I am searching for a thread on that.
bmwdoc2002 said:
I also am only getting Edge signal on my unlocked vibrant. When I run a 1MB speed test at mobilespeedtest.com it says I am downloading at 2581 kbps which, according to their chart, is a little more than the average 4g speed. Very weird. I also can't download any apps but I am searching for a thread on that.
Click to expand...
Click to collapse
i'm confused, you said you are getting edge signal, but your speed test shows 2.581mbps? thats 3g speeds.
by the way, you can make the vibrant pick up both att 1900 and 850 signals.
you own a bmw and you are a doctor?
SamsungVibrant said:
i'm confused, you said you are getting edge signal, but your speed test shows 2.581mbps? thats 3g speeds.
by the way, you can make the vibrant pick up both att 1900 and 850 signals.
you own a bmw and you are a doctor?
Click to expand...
Click to collapse
I am on an unlocked Vibrant right now. I live in the baltimore area and I am getting full 3g on a friends borrowed att sim. I get faster speeds on his att than I get on my own tmobile.
When I unlocked my phone, I used the wife's SIM card on my Vibrant and was able to get 3G as well. It registered without any issues.
New york city is also all 1900mhz. I am chugging along at a healthy 4300kbps according to mobilespeedtest. I think that is faster than the 3g spec allows so I am starting to doubt that website a bit.
snowdogging said:
New york city is also all 1900mhz. I am chugging along at a healthy 4300kbps according to mobilespeedtest. I think that is faster than the 3g spec allows so I am starting to doubt that website a bit.
Click to expand...
Click to collapse
what website? you can also set the vibrant to pick up at&t's wcdma 850mhz
SamsungVibrant said:
HEY, don't listen to these guys. You can get both wcdma 1900 and wcdma 850 on the vibrant, don't worry, you will be able to get at&t 3G on your phone!
I'll show you how when I have time, maybe this weekend.
Click to expand...
Click to collapse
HI,
Can you explain how you get UTMS / HSDPA 850 on the Vinrant? According to the specs at xda
It doesnt officially support that, but over at howard forums (sorry cant post lins as a new user):
1666323-USING-SAMSUNG-T-MOBILE-VIBRANT-T959-on-WIND-MOBILE.....IN-CANADA
it seems it is an option in the service menu. Have you tried UTMS850 (as opposed to GSM850) and can confirm it works. Its relevant in Australia as the best coverage NextG network (Telstra) operates on UTMS850
Cheers Chris.
Derp.....
Sent from my SGH-T959 using XDA App
i'm not getting 3g either,
is there a link to a map to see if i have 1900 in my area?
what apn setting should be used, im pretty shocked that it did the edge APN settings on its own
Try dialing
*#2263#
choose option [4]Combi Bands
Choose option [8] WCDMA 850 bla bla
Choose Add WCDMA 850 bla bla
If the chip is capable to work in that frequency it will work. There are mixed reports but it is the way to fix it
It's weird. I have an Atrix and a new GSII. At home my Atrix shows HSPA and my GSII shows HSDPA. Isn't HSPA "4G" and HSDPA 3G?
mgymnop said:
It's weird. I have an Atrix and a new GSII. At home my Atrix shows HSPA and my GSII shows HSDPA. Isn't HSPA "4G" and HSDPA 3G?
Click to expand...
Click to collapse
That's what I thought too, and I'm also showing HSDPA... hmmm... but the upload speeds are HSPA+ so it can't be right.
I thought both 3G and "4"G could be called HSPA. High Speed Packet Access.
Doesn't the D stand for download. I thought HSUPA (U for upload) was the feature that got all the publicity with the Atrix, as it wasn't activated at launch.
I am sitting on H+ according to my status but in about it says UMTS, which I thought was 3G. My HTC 8525 ran on UMTS 4 years ago.
Sent from my SGS II
quarlow said:
I thought both 3G and "4"G could be called HSPA. High Speed Packet Access.
Doesn't the D stand for download. I thought HSUPA (U for upload) was the feature that got all the publicity with the Atrix, as it wasn't activated at launch.
I am sitting on H+ according to my status but in about it says UMTS, which I thought was 3G. My HTC 8525 ran on UMTS 4 years ago.
Sent from my SGS II
Click to expand...
Click to collapse
I think in the about settings HSPA means HSPA+ while HSDPA means the slower standard. I think it is probably a bug. My Atrix could distinguish between HSPA and HSDPA in the about settings. In areas without 4G it would read UMTS or HSDPA while in advanced backhaul areas it would read HSPA. On The GSII it seems to be messed up. I never saw HSPA.
mgymnop said:
I think in the about settings HSPA means HSPA+ while HSDPA means the slower standard. I think it is probably a bug. My Atrix could distinguish between HSPA and HSDPA in the about settings. In areas without 4G it would read UMTS or HSDPA while in advanced backhaul areas it would read HSPA. On The GSII it seems to be messed up. I never saw HSPA.
Click to expand...
Click to collapse
Mine is acting the same way my Infuse was. It never seems accurate. Obviously if you pass the 0.33mbps range your HSUPA is enabled. That's about all we really know for sure, hehe
Phone status display frequently is broken in the framework and not reporting correctly.
For example, the Infuse would report UMTS when in an HSPA+ mode...
Entropy512 said:
Phone status display frequently is broken in the framework and not reporting correctly.
For example, the Infuse would report UMTS when in an HSPA+ mode...
Click to expand...
Click to collapse
I'd imagine the marketing\disguising one technology as another and not being forthcoming about where has "enhanced backhaul" nor defining what "enhanced backhaul" even is in terms of speed, likely doesn't help things either ;-)
hspa and hsdpa are both 3.5G at best
Sent from my SGH-I777 using xda premium
Dial *#0011# on your phone. The screen will show what exactly is your phone using. So far, I have yet seen 'HSPA+ used' display anything other than 0.
Hello all
I haven't seen the issue below posted so I thought I'd put it out there and maybe we can figure out whats going on.
I recently purchased an ATT Galaxy Note because of price and vanity . I have an ATT Galaxy Note which I have rooted using mashi's ROM. Its unlocked. It has Rogers LTE sim and I have an LTE data plan. However I do not appear to get LTE connection/speeds. No LTE indication in the top bar. Speed test reveals HSPA+ - esque speeds. This is throughout my LTE coverage area in my city. No LTE indication has ever been shown on my device. Support has confirmed everything is okay from their end.
I was under the impression that the ATT Galaxy Note used 1700 AND 700 for LTE or at least it had the radio enabled for said frequencies. Rogers network uses only 1700 I think (from what I understand the 700 spectrum in Canada has yet to be auctioned off for LTE). Only possible issue I see is that perhaps ATT Galaxy Note only has 700 band enabled for LTE and thus it makes sense that it doesn't work on Rogers' LTE.
The att website says band 4 and 17 for LTE on the galaxy note so I would think both 700 and 1700 are enabled for LTE. However further reading on the internets suggests that ATT only uses 700 for LTE, and Rogers only 1700 as suspected. I suppose my assumption was incorrect and ATT disabled 1700 LTE for fun (along with NFC and hspa+/LTE toggling).
Any one else experiencing the same issue? Maybe flashing Rogers radio onto the ATT Note will fix it (and break video playback)?
Thanks
What are your APN settings? Can you flash the attached Rogers LTE APN Backup and Restore xml and see if you get anything? Make sure you are setup to use Rogers LTE apn settings
APN:
ltemobile.apn
apn type: internet+mms+supl
I double checked each setting on that setting page with support and they said they pushed the settings onto my phone, twice.
is the file you attached just all the settings for the access point settings page?
cheers
Hi,another option you have, now there is a custom Rom based off rogers software in the development section that you could flash. I have at&t software on my telus note and i have had some problems
Sent from msmy SAMSUNG-SGH-I717 using xda premium
EVOO2 said:
Hello all
I haven't seen the issue below posted so I thought I'd put it out there and maybe we can figure out whats going on.
I recently purchased an ATT Galaxy Note because of price and vanity . I have an ATT Galaxy Note which I have rooted using mashi's ROM. Its unlocked. It has Rogers LTE sim and I have an LTE data plan. However I do not appear to get LTE connection/speeds. No LTE indication in the top bar. Speed test reveals HSPA+ - esque speeds. This is throughout my LTE coverage area in my city. No LTE indication has ever been shown on my device. Support has confirmed everything is okay from their end.
I was under the impression that the ATT Galaxy Note used 1700 AND 700 for LTE or at least it had the radio enabled for said frequencies. Rogers network uses only 1700 I think (from what I understand the 700 spectrum in Canada has yet to be auctioned off for LTE). Only possible issue I see is that perhaps ATT Galaxy Note only has 700 band enabled for LTE and thus it makes sense that it doesn't work on Rogers' LTE.
The att website says band 4 and 17 for LTE on the galaxy note so I would think both 700 and 1700 are enabled for LTE. However further reading on the internets suggests that ATT only uses 700 for LTE, and Rogers only 1700 as suspected. I suppose my assumption was incorrect and ATT disabled 1700 LTE for fun (along with NFC and hspa+/LTE toggling).
Any one else experiencing the same issue? Maybe flashing Rogers radio onto the ATT Note will fix it (and break video playback)?
Thanks
Click to expand...
Click to collapse
I was having this problem on my Telus Note.. Not sure if you have tried this. Settings-Wireless and Network-Mobile Network,Network Mode.. Mine was set to GSM/HSPA Auto Mode, Switched to GSM/HSPA/LTE Auto Mode and all is good for me now.
Thanks taking the time for the suggestion, but the ATT Note does not have the network mode option in the settings (ie I cant enable/disable LTE), but the Canadian Notes do have this option.
How do you enable hspa+ on an atrix 4g? I can never seem to get the "H+" or "4g" icon, only H (i've checked inside the phone settings and it is definitely just hspa, not hspa+, or hspa: category 10 or otherwise)
I bought my atrix 4g off craigslist and used it on ATT straight talk for a month and had horrible speeds and never had hspa+ (only hspa) so I had the phone carrier unlocked and took it to tmobile monthly 4g but still I am only getting hspa (not hspa+).
Basically, is this phone capable of getting "pseduo-4g" hspa+ or is it locked to hspa? I've seen several mentions of ATT shipping the phone with hspa+ disabled, but no way of knowing how to enable it.
Other info: I am currently using neutrino ROM.
Thanks!
You will only get edge on t mobile with any att phone.............
Sent from my MB865 using Tapatalk 2
Well, its now an unlocked phone and I know I get more than edge because I have hspa right now.
tgeo said:
Well, its now an unlocked phone and I know I get more than edge because I have hspa right now.
Click to expand...
Click to collapse
I already gave you the answer... If you believe you can get 3g with an atrix 2 on t mobile, you must be a hero.
The bands are not compatible. A quick google search will plainly show you that.
Sent from my MB865 using Tapatalk 2
fireforhire said:
I already gave you the answer... If you believe you can get 3g with an atrix 2 on t mobile, you must be a hero.
The bands are not compatible. A quick google search will plainly show you that.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Except that Tmobile is refarming their 1900mhz pcs from 2g to 3g... so yeah you can. Las Vegas and Kansas City are already official... so what?
---------- Post added at 05:56 PM ---------- Previous post was at 05:52 PM ----------
Also, someone correct me if I'm wrong, the Atrix 4G does 14.4mbps hspa, isn't the 21mbps the actual hspa+?
I know it may not be possible but, Hes talking about an ATRIX 4g. Not ATRIX 2. READ MUCH???
Sent using AT&T DROID BIONIC.
The Atrix 4G and the Atrix 2 both support T-Mobile's "4G" network which is simply HSPA+ but the best you'll do with the Atrix 4G is 14.4 Mbps (good luck getting that actual speed). The Atrix 2 can hit the 21.1Mbps but not the 42Mbps speeds, and again, good luck with that.
The Atrix 4G is fully capable of being used with T-Mobile now that they are refarming/rolling out their 3G and "4G" 1900 MHz band, people in some areas still haven't gotten the upgrade yet but in many places in the US you can get 3G speeds and even the "4G" HSPA+ with that device on T-Mobile without issues. Here in Vegas when they turned that on a few weeks back (the day the iPhone 5 was released) I had an Atrix 4G and got T-Mobile 3G/HSPA+ service that afternoon with speeds in excess of 6Mbps because I live across the street from a cell site for them, average is about 3-5Mbps most of the time.
The Atrix 4G will most commonly show HSPA:10 when used with T-Mobile, in my experience (that's on ICS or JB ROMs, GB won't show that level of detail/info).
As for the HSPA or HSPA+, they all basically work the same way. 14.4Mbps is considered under the HSPA+ "umbrella" as the saying might go.
br0adband said:
The Atrix 4G and the Atrix 2 both support T-Mobile's "4G" network which is simply HSPA+ but the best you'll do with the Atrix 4G is 14.4 Mbps (good luck getting that actual speed). The Atrix 2 can hit the 21.1Mbps but not the 42Mbps speeds, and again, good luck with that.
The Atrix 4G is fully capable of being used with T-Mobile now that they are refarming/rolling out their 3G and "4G" 1900 MHz band, people in some areas still haven't gotten the upgrade yet but in many places in the US you can get 3G speeds and even the "4G" HSPA+ with that device on T-Mobile without issues. Here in Vegas when they turned that on a few weeks back (the day the iPhone 5 was released) I had an Atrix 4G and got T-Mobile 3G/HSPA+ service that afternoon with speeds in excess of 6Mbps because I live across the street from a cell site for them, average is about 3-5Mbps most of the time.
The Atrix 4G will most commonly show HSPA:10 when used with T-Mobile, in my experience (that's on ICS or JB ROMs, GB won't show that level of detail/info).
As for the HSPA or HSPA+, they all basically work the same way. 14.4Mbps is considered under the HSPA+ "umbrella" as the saying might go.
Click to expand...
Click to collapse
I didn't know tmob where deploying a hspa frequency that at&T use. Thanks for that tip.
10Mbps achieved on Atrix on at&T 3g network here http://forum.xda-developers.com/showthread.php?t=1905464
hspa category 10 is 'characterized' as hspa+ but is not hspa+ (evolved hspa) and should not display h+ or 4g on the status bar for that reason. The 4g branding is exactly that... "branding" and at&T should have never used 4g in the name in my opinion. They always said "4g like speeds"
See post #4 at http://forum.xda-developers.com/showthread.php?t=1912716 where there are also a couple links I posted that I found interesting on this subject.
Sent from my MB860 using Tapatalk 2
Hmm, interesting info guys. I do indeed live in Vegas and have been using a GB ROM (maybe I'm not seeing hspa: category 10 because of this).
Sounds like I've done all I can then, thanks!
tgeo said:
Hmm, interesting info guys. I do indeed live in Vegas and have been using a GB ROM (maybe I'm not seeing hspa: category 10 because of this).
Sounds like I've done all I can then, thanks!
Click to expand...
Click to collapse
Only ics and jb display the additional radio info.
The key is that you are on a radio that is suited to your rom and provider. 36p and 37p are the two most popular at&t radios, 37p being the official production release and used on many releases. Both 36p and 37p operate at hspa 10. Each provider is at differing phases, as well as having differing standards in their network, for how they implement the any bells and whistles of cellular. There is so much to it.
Sent from my MB860 using Tapatalk 2
Terrible speeds with H+ Icon. Hspa marked as H+.
I am only getting Edge, Umts and HsPa.. My phone marks hspa as H+. I check on status and Umts and Hspa is marked as H+.. My speeds are terrible, only getting 1.8 mbps.
ASPTHEONE said:
I am only getting Edge, Umts and HsPa.. My phone marks hspa as H+. I check on status and Umts and Hspa is marked as H+.. My speeds are terrible, only getting 1.8 mbps.
Click to expand...
Click to collapse
Might get the app on Google Play called Antennas, it'll show you the cell sites/towers you're connected to on maps; if you're connected at a given mode (like HSPA or UMTS) but you're pretty far from the site/tower, that could be the primary reason you get the "terrible" speeds. Antennas does work best, however, by putting the phone in 2G/EDGE mode but it is capable of doing 3G/4G/HSPA/UMTS/etc as well.
I live literally across the street from the main site/tower that I stay connected to so I pull 5-8Mbps when I'm in HSPA+ mode but, I keep my Photon in 2G/EDGE mode probably 99% of the time, I have Wi-Fi at home also so there's just no reason to use up any of my 5GB of bandwidth for the "4G" side of things.
T-Mobile 1900 mhz service on Atrix 4G in MD!!
So having played with a couple of 4Gś @ work (and how unawesome they made my G2x look!) I purchased a combo phone and lapdock. This before i realized they worked on different frequencies!!! DOH!
Fortunately, T-Mobś been ahead of me on the curve. I read that they started the long road to providing their service to the souls stranded out in Verizon &/or AT&T limbo...
So I swapped my sim and...Yaaaay! 4 of 5 bars of....wait for it... H+!!!:laugh:
Then, BOOOOO! No data! No MMS. No internet!:crying:
A few hours of online (and Iḿ ashamed to say, trial and error build prop editing) plus 3 calls to T-Mob yielded this in an email:
¨APN settings for data and picture messaging (MMS): Android" on T-mobileś support page (as a noob I cannot post the link):silly:
Iḿ now docked, working, spotifying and sharing ´ẃif my XDA fam!¨
Hope this helps!
Hi everyone! I been noticing that my i9100 is not running edge anymore but rather it has an H or H+ on the signal bat. Is this HSPA+ speed on the phone or am I just being too excited? I think this is because of T-Mobile running the new bands. If I can I will screenshot it when I see it again. So does anyone have the same thing as me? Thank you!
HHT said:
Hi everyone! I been noticing that my i9100 is not running edge anymore but rather it has an H or H+ on the signal bat. Is this HSPA+ speed on the phone or am I just being too excited? I think this is because of T-Mobile running the new bands. If I can I will screenshot it when I see it again. So does anyone have the same thing as me? Thank you!
Click to expand...
Click to collapse
You should have posted a question in the q n a section. However for your information in the UK with t mobile I have had h+ speeds for roughly two years. It's got even faster on ee even though still h+ not 4g.. And 3 network gets even faster speeds on h+
Sent from my GT-I9100 using Tapatalk 2
Same here. I have had H+ for years. I only ever get edge when I'm in a very low signal area.
He's talking about T-Mobile in the US, which runs HSPA on different bands than in Europe.
Well, until recently, anyways. They have been in the process of re-farming the 1900mhz band for this use, so depending on the market you are in, you may have gotten it. So if that band is turned on to HSPA where you are, you'll get it on the i9100.
@mattisfaction well it did not seem like a question. I was trying to see if anyone had it like me.
@ctomgee he is right. I was talking about T-mobile USA. But thank you for answering my question. This is amazing! I love my i9100 even more now!