So, I rooted my GS3 with this method http://www.youtube.com/watch?v=XoEVD...ure=plpp_video
Everything went perfectly and was successfully rooted.
I then made a backup of my phone.
I tried installing a rom and it had errors, so I restored my phone and it was successfully stored and hit restart phone.
Thats where I am at now. The phone shut off, and wont turn back on. I have it on the charger and there is no charging light, nothing. tried pulling the battery, entering recovery. Nothing works.
I have no idea what happened or how to get my phone back on.
Please help.
Thank you.
Sounds like someone installed an International rom.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
if you did flash an international rom, did you follow all the suggestions in this thread during your recovery attempt:
http://forum.xda-developers.com/showthread.php?t=1727443
The seriousness of your issue will depend on if you can enter download mode or not. Do not have USB connected, pull the battery and put back in to make sure it is truly off, instead of some hung state of "on". Hold Power, Volume Down, and Home at the same time, for several seconds to try to enter download mode (see http://youtu.be/0BJlfbZNB-I).
If you can get in, you should be all set.
Then open up Odin (http://samsung-updates.com/Odin307.zip)
Connect USB, it should light up a "COM" port recognizing the phone as connected.
Find the proper stock tar file for your carrier:
AT&T: http://forum.xda-developers.com/showthread.php?t=1737848
Sprint: http://forum.xda-developers.com/showthread.php?t=1737859
T-Mobile: http://forum.xda-developers.com/showthread.php?t=1737855
Note, the sprint one also has a video link to similar instructions.
If you can't enter download mode, however, that's a potentially tough situation. You may research "jigs" that I'm not familiar with, or you may consider a warranty return, an often debated morally questionable move.
Let me save you some time..
As said, see if you can get into download although if no charging is happening i'm 99% sure theres no download mode either. In which case plug it in your PC. If it appears in device manager as QHSUSB DLOAD then let me be the first to say,
WELCOME TO BRICKTOWN. sorry but you look like another unfortunate person to see how easy these ****ers brick. my deepest sympathies
Also, in reference to the jig, unfortunately does nothing in this situation. I feel confident though that somebody will eventually find a way to unbrick with the Qhsusb dload brick because i saw after hours of looking into this it has been done with other phones. just my 2 cents
So, what I ended up doing is returning the phone to best buy for an exchange.
Now I know to pay attention and not install international roms anymore. Lol
Thanks for all the help though.
Oh, and my phone was not able to enter download mode, so I was assuming I was screwed for the most part.
Sent from my SPH-L710 using Tapatalk 2
Great, another XDA user not reading then frauding BestBuy.
via The Sexiest Phone Alive
itszcharlie said:
Great, another XDA user not reading then frauding BestBuy.
via The Sexiest Phone Alive
Click to expand...
Click to collapse
True but best buy / Samsung will not go out of business because of this...sounds like a newb not doing his homework vs. someone who knew what they were doing , taking a risk and then returning it. Hardly fraud when there was no intention of taking the risk.
Sent from my SGH-T999 using xda app-developers app
accordex said:
True but best buy / Samsung will not go out of business because of this...sounds like a newb not doing his homework vs. someone who knew what they were doing , taking a risk and then returning it. Hardly fraud when there was no intention of taking the risk.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
The risk is always there when you start flashing roms. Especially for script kiddies that cant be bothered to read directions.
itszcharlie said:
Great, another XDA user not reading then frauding BestBuy.
via The Sexiest Phone Alive
Click to expand...
Click to collapse
Man y'all is too funny talking about this fraud crap... lmao who cares????? look around guy, these company don't give a **** about you. But if it bothers you that much call the cops or the F.B.I. Hell since we went that far let call the C.I.A
Sent from my Transformer TF101 using xda app-developers app
cwalker29 said:
Man y'all is too funny talking about this fraud crap... lmao who cares????? look around guy, these company don't give a **** about you. But if it bothers you that much call the cops or the F.B.I. Hell since we went that far let call the C.I.A
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
These company's do care, and why do you think they lock bootloader and constantly patch to prevent rooting , samsung has been easy so far but, given enough returns and complains from retailers they will change their policy. Just a matter of time.
Samsung also implemented flash counter just for this reason.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Couple things. People work for Best Buy and anytime you defraud them it will impact the company, the profitability, and employees. It will also eventually impact people who have honest claims and get put through the ringer because of previous claims.
Secondly, this phone isn't any easier to "brick" than any other phone when you flash a rom, modem, etc. that wasn't made for it. Would you try to chip your Ford's engine with a chip meant for a GMC truck? Would you flash the BIOS of your Dell laptop with the BIOS image for an HP? That is how people need to consider the variants, as if they are from separate companies, not only separate products.
These threads just get under me. How do you not read every single sticky on each board.
Hmmm, wonder why Verizon got the idea to lock the bootloader?
Related
Hi. I ruined my phone when trying to add a new kernel (overclock 1.2).
It stayed on Vibrant/Samsung screen.
I downloaded one click odin.. LIKE AN IDIOT I DIDNT SEE IT WAS FOR CAPTIVE (AT&T) ONLY!!
NOW I DONT KNOW WHAT TO DO.
PLEASE HELP and link me to wherever i need to download stuff.
Before others eat you alive and flame you, look around dude. Look at the stickies.
C-4Nati said:
Before others eat you alive and flame you, look around dude. Look at the stickies.
Click to expand...
Click to collapse
I did, I couldnt find anything.
I don't think anyone has been a dumber noob than me..
ALSO it keeps just rebooting over and over and over.. I dont think it recognizes my battery idk..
MasterGGM said:
I did, I couldnt find anything.
I don't think anyone has been a dumber noob than me..
ALSO it keeps just rebooting over and over and over.. I dont think it recognizes my battery idk..
Click to expand...
Click to collapse
Put into download mode use odin to flash back to stock all the tools you need are in the sticky that says bible in it..........
Sent from my SGH-T959 using XDA App
S4BRE2121 said:
Put into download mode use odin to flash back to stock all the tools you need are in the sticky that says bible in it..........
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Download mode doesnt work
It shows AT&T and keeps rebooting.. over and over. I have no idea if they will exchange it due to it being a t-mobile phone.
Maybe Try the jig
Not sure I know enough about the real issue other than you got the wrong rom. But, there is a jig you can make 301k resistor (or combo of a few to equal that number) soldered to a usb connector on # 4 & 5 pins look it up it will unbrick the phone and get you into the phone from there I not sure what you will need to do next but that would get you into the phone. Btw the resistors and usb cord less than 5 bucks good luck
Dude, you are being childish. I usually never flame but don't say you did because you didn't Enough. Slow down and take your time. If you are doing any kind of mods you should learn how to use Odin first, but unfortunately its always after the fact.
Learn how to use Odin, in the development bible I have a video there to show you how. Doesn't get any easier than that.
Sent from my SGH-T959 using XDA App
jzero88 said:
Dude, you are being childish. I usually never flame but don't say you did because you didn't Enough. Slow down and take your time. If you are doing any kind of mods you should learn how to use Odin first, but unfortunately its always after the fact.
Learn how to use Odin, in the development bible I have a video there to show you how. Doesn't get any easier than that.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
You are completely right. I was "trigger happy" you may say and I did it by rushing through it and ruined my phone. Luckily I have not yet sold my 3Gs and could use that until I get tmobile to exchange it.
The jig would most likely work for my case but I would need a step by step guide which unfortunately didn't find with images or video.
If I could just kill the AT&T boot logo it'd be perfect but sadly I can't.
I got the phone two days ago..so I am really sure I can get away with an exchange.
If you return the phone and it is booting with the At&t logo they will now you where messing with it and charge you the full amount of the phone which is around $400.
What you have is a soft brick. You can fix it if you bothered reading. Just follow this:
http://forum.cyanogenmod.com/topic/...r-vibrant-and-return-to-stock-phone-pc-error/
Jamison904 said:
If you return the phone and it is booting with the At&t logo they will now you where messing with it and charge you the full amount of the phone which is around $400.
What you have is a soft brick. You can fix it if you bothered reading. Just follow this:
Click to expand...
Click to collapse
I wish mine was a soft brick but it isn't. That thread was for "phone ! PC" mine is a tmo vibrant that boot loops as AT&T captive since I flashed the wrong stock kernel.
Remove battery, SIM card and the external SD card.
Connect USB cord
Hold down both volume keys and insert the battery.
I love how everyone gives the same reply. The phone WAS FULLY BRICKED.
I took it to T-Mobile and said I did an update and this is what happened and they gave me a brand spanking new one! =D
Thanks for all your help though.
MasterGGM said:
I love how everyone gives the same reply. The phone WAS FULLY BRICKED.
I took it to T-Mobile and said I did an update and this is what happened and they gave me a brand spanking new one! =D
Thanks for all your help though.
Click to expand...
Click to collapse
Pathetic, take some responsibility. Thanks for supporting a future of locked phones.
I can confirm that I bricked my phone tonight. I was playing in Clockwork trying to get a ext4 partition using a sdparted.txt. I gave up with that because I could not get it to work properly. Well I decided to push my a rom from adb to sd and it was taking forever so I closed out cmd and proceeded to mount SD from recovery but it would not mount. So I figured the SD card was locked up with CMD or perhaps I corrupted the partitions. So I pulled the battery and popped the sd in my pc and everything was fine with the card. So I went back and put the sd card back in my phone and tried to boot it up and I got nothing. I then plugged the phone into my pc and got nothing.. No lights no boot nothing. It did try to install QHSUSB_DLOAD drivers. Which I know someone is already working on. I guess sprint will be getting a visit tomorrow with my brick. Sigh.. No matter how experienced you think you are you are always not experienced enough..
Just wondering have you tried turning it on while its not plugged in? It may take a few pushes of the power button. Well you mentioned you tried before you plugged it in but try a few times, one time it took me 6 presses of the power button.
Try pulling the battery out waiting for 5 to 10 minutes then put it back and try booting!
Sywped from mah Supasonic!
To answer both of you Yes I have tried many times of pushing the power button plugged and unplugged and also leaving the battery an for extended period of time. No charging light comes on and it prompts for the QHSUSB_DLOAD drivers. I am assuming this is what trevE has been working on. Thus leading me to believe it is a full brick.
Can you get to your Hboot?
Sent from my SPH-D700 using XDA Premium App
So, what exactly are you going to tell sprint after you bricked your phone by flashing a rom through a custom recovery?
Sent from my PG86100 using Tapatalk
sn0b0ard said:
So, what exactly are you going to tell sprint after you bricked your phone by flashing a rom through a custom recovery?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I was doing an OTA update and then it didnt turn back on.
Yeah, doesn't work like that. EVO 3D has emmc that is write protected that is designed to revert to stock if ota fails.
Sent from my PG86100 using Tapatalk
sn0b0ard said:
Yeah, doesn't work like that. EVO 3D has emmc that is write protected that is designed to revert to stock if ota fails.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
He could just say his phone turned off and now it wont boot. The employees at a Sprint repair center don't have the time or resources to launch an investigation into exactly how your phone failed and if it was his fault or not. Unless he opens his mouth or its some kind of physical/liquid damage they will give him a replacement no problem.
This is correct. By this I mean above post. They won't take the time to really check and you are not lying by saying it won't boot.
Sent from my PG86100 using XDA Premium App
Just tell them that you flipped the score on angry birds and then some crazy government stuff started flashing on your screen before it burned out. And then tell them that you might be the new intersect.
..
Sent from my PG86100 using XDA App
But what happens if he says that then the Sprint guys find out he was lying? Do they ever do anything?
Sent from my fingers.
zaner123 said:
But what happens if he says that then the Sprint guys find out he was lying? Do they ever do anything?
Sent from my fingers.
Click to expand...
Click to collapse
They won't find out if the phone wont turn on. The problem is that people are not smarter than the equipment they are working with and do stupid things like brick their phones, and return them while lying and in the end, the rest of us end up suffering. Before Android brought in a whole slew of retards who bricked their phones, insurance was a 50 dollar deductible. I fully expect it to be 150 soon.
If you are dumb enough to try stupid things and brick your phone, at least man up and be responsible and do the right thing. Yeah, thats not going to happen.
if you brick a phone why not do the right thing and get yourself a new one by manning up and paying for it. I mean dont we all talk about doing the right thing? If you dont wanna pay retail, I am sure they will let your renew your upgrade, if you tell them you can either buy a phone or pay the ETF and go elsewhere, they will usually let you upgrade the phone.
I cant believe you experiment with stupid **** when you know it might f up the phone.
If you have insurance you can just lose it and pay the 100.00 ded. the brick should be worth at least a 100.00 on ebay. I sold an og evo with a broken lcd and bad esn. in an auction it got 126.50 about a month ago.
Semantics said:
They won't find out if the phone wont turn on. The problem is that people are not smarter than the equipment they are working with and do stupid things like brick their phones, and return them while lying and in the end, the rest of us end up suffering. Before Android brought in a whole slew of retards who bricked their phones, insurance was a 50 dollar deductible. I fully expect it to be 150 soon.
If you are dumb enough to try stupid things and brick your phone, at least man up and be responsible and do the right thing. Yeah, thats not going to happen.
Click to expand...
Click to collapse
Meh just a soft brick, it's not like he's shipping it to them in pieces or anything. It just needs reflashed. If he were to use insurance the deductible would be nearly pure profit for them.
I remember seeing in another forum (can't remember which atm) that something was buggy in clockwork and it would zero out parts of the eMMC when formatting/partitioning something. It may be a good idea for someone to try and find out what it was doing to see if our version is prone to it also.
I decided to come back to my post and say a few more things. To the few who harped and lectured about taking my phone to sprint, I just wanted to let you know I explained to the sweet girl behind the counter that I was formatting my sdcard and some how the phones emmc got erased with it. She had no freaking clue Wtf I was talking about and just gave me a different phone. I never had any intention of claiming insurance or lying about how it happened. So you guys who whined can settle down now. But on another note this all happened on clock work and yes I was repartitioning the SD card via clock work / recovery - adb shell - sdparted.txt script.
Something funky happened when I did the battery pull after I could no longer mount the sdcard from within recovery..
Sent from my PG86100 using XDA Premium App
xHausx said:
Meh just a soft brick, it's not like he's shipping it to them in pieces or anything. It just needs reflashed. If he were to use insurance the deductible would be nearly pure profit for them.
I remember seeing in another forum (can't remember which atm) that something was buggy in clockwork and it would zero out parts of the eMMC when formatting/partitioning something. It may be a good idea for someone to try and find out what it was doing to see if our version is prone to it also.
Click to expand...
Click to collapse
I think that's the NookColor. You *cannot* format your SD (or on any non-stock rom) or you would format a portion of the eMMC and could (would always?) brick, hard....though it probably happens elsewhere, it's the entire platform from what I recall (of which the NookColor is a near reference design)...I think it was from confusion caused by how the partitions were referenced since you could boot from SD or eMMC or have any number of partitions on either.
If there were never any "retards" trying unknown things, there would be no dev community.
Sent from my PG86100 using XDA Premium App
SAShady said:
If there were never any "retards" trying unknown things, there would be no dev community.
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
+1 I r tard
Sent from my PG86100 using XDA Premium App
Guys my note seems to be in the most dreadful state possible. It wont turn on, I can't put it in recovery, when I connect it to the computer I can hear a sound signalling it does recognize something, but adb cant find the device (seems like it turns off).
This happened after trying to put the cwm beta4 recovery.img , nobody except me is responsible, I was trying to put flash the image, after running the command however it dint seem to me it made any difference after trying to boot to recovery so, I tried running the command again, except this time, it gave me an error which said it ran out of space or disk space, I tried restarting and it wont turn on.
Any and all help is appreciated.
Please move this to the correct forum.
This forum is for development
Sent from my SAMSUNG-SGH-I717 using XDA
Return it and they'll give you a new one. They cant tell you bricked if it won't turn on.
G~Note "nuff said"
alperin1 said:
Please move this to the correct forum.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I'm sorry I wasn't aware that this wasnt the right place.
N3RD420 said:
Return it and they'll give you a new one. They cant tell you bricked if it won't turn on.
G~Note "nuff said"
Click to expand...
Click to collapse
Agreed, except I want to try and see if it can be recovered, else I'll get it switched.
Did u try to go to download mode by holding down. Then wait 15 sec press up even if it doesnt have anything on screen and see if odin sees it?
Sent from my SGH-I717R using XDA App
u921333 said:
Did u try to go to download mode by holding down. Then wait 15 sec press up even if it doesnt have anything on screen and see if odin sees it?
Sent from my SGH-I717R using XDA App
Click to expand...
Click to collapse
Okay just noticed this, in the device manager it now says QHUSB_DLOAD, I'm guessing this is some form of download state, I have odin open, how do I know if its recognizing it?
It would show a yellow square with a com port.... But i think that error is very bad one of our devs in skyrocket got it and it was return phone or jtag service online.
Sent from my SGH-I717R using XDA App
you might have had a typo in your last flash...
if you typed mmcblk0p2 instead of mmcblk0p22, then it would explain the out of space, and possibly also the boot error...
u921333 said:
It would show a yellow square with a com port.... But i think that error is very bad one of our devs in skyrocket got it and it was return phone or jtag service online.
Sent from my SGH-I717R using XDA App
Click to expand...
Click to collapse
Odin doesn't show anything, I mean I doesn't show the yellow exclamation mark.
braway said:
you might have had a typo in your last flash...
if you typed mmcblk0p2 instead of mmcblk0p22, then it would explain the out of space, and possibly also the boot error...
Click to expand...
Click to collapse
Very likely thats what I did, is there anyway out?
i_max2k2 said:
Very likely thats what I did, is there anyway out?
Click to expand...
Click to collapse
probably not, or only with lots of effort
returning it is probably the fastest
I do understand, but since I'm a total noob on android, .and that nothing else could possible go any wrong, I would sure like to try.
drop 5 bucks on a jig
http://www.amazon.com/gp/product/B005UUCT0Y/ref=oh_o00_s00_i00_details
or similar.
this wont reset the counter like on certain devices but it will put the sgh-i717 at&t note into download mode just by plugging it in
then flash back to stock with odin. all of the info to do that is located in this forum
edit.. alot of these guys are right though, if it doesnt react to being plugged in or turned on no matter what, nobody in the at&t store will figure it out, they will mark it defective and give you a new one
Honestly......best idea.... return it. I'd actually suggest leaving it alone, on the off chance you got Odin to recognize it, and maybe halfway fixed the Note, it might then look to whomever you return it to that you broke it somehow. Basically the fact it won't turn on at all is to your benefit at this point.
My phone will eat your Apple!
brittoking said:
Honestly......best idea.... return it. I'd actually suggest leaving it alone, on the off chance you got Odin to recognize it, and maybe halfway fixed the Note, it might then look to whomever you return it to that you broke it somehow. Basically the fact it won't turn on at all is to your benefit at this point.
My phone will eat your Apple!
Click to expand...
Click to collapse
I agree. Return. Been there twice with an infuse and skyrocket. No questions asked...swap out. I always say I'm never getting involved in Modding my phone after an incident like that. Am I the only who says that?
Sent from my SAMSUNG-SGH-I717 using xda premium
brittoking said:
Honestly......best idea.... return it. I'd actually suggest leaving it alone, on the off chance you got Odin to recognize it, and maybe halfway fixed the Note, it might then look to whomever you return it to that you broke it somehow. Basically the fact it won't turn on at all is to your benefit at this point.
My phone will eat your Apple!
Click to expand...
Click to collapse
I kind of just thought about that, I'll leave it as is, and get it swapped.
ryanbmw51 said:
I agree. Return. Been there twice with an infuse and skyrocket. No questions asked...swap out. I always say I'm never getting involved in Modding my phone after an incident like that. Am I the only who says that?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Yep will do this.
ryanbmw51 said:
I always say I'm never getting involved in Modding my phone after an incident like that. Am I the only who says that?
Click to expand...
Click to collapse
I, for one, couldn't wait to tear into my new $300 gem
As for the brick, i concur, returning it at this point would be best. I hate using dd to flash things, one typo can screw up the entire device.
if it turns on at all... you may risk getting it found to be modded. just sayin.
if i were you. Id find an old ac adapter cut the wires and seperate. then zap the prongs where the battery connects. in my experience, old laptop chargers work the best. be sure to cut the end off of the cord that plugs into the laptop. the brick will protect you from fatal or even harmful shock so dont worry.
just my .02
I agree. Mine was rooted the day I got it.
If you do decide to root the replacement, reading is your friend. Read, read again, and read it a third time. Then don't be afraid to read it more if necessary, and a you're doing the steps.
Well on the way to my fairytale!
braway said:
probably not, or only with lots of effort
returning it is probably the fastest
Click to expand...
Click to collapse
It happened as you had said missed a 2
ashies7 said:
I agree. Mine was rooted the day I got it.
If you do decide to root the replacement, reading is your friend. Read, read again, and read it a third time. Then don't be afraid to read it more if necessary, and a you're doing the steps.
Well on the way to my fairytale!
Click to expand...
Click to collapse
I had it rooted, it was while trying to install cwm, I did read it a few times, perhaps needs more reading, I had tinkered with iphones quite a bit, but I never had a bricked device ever in like 4 years, I never thought it could goto a state where the only real way to bring it back would it be to connect to a jtag device.
Never had to ask for help always found a way but now im stuck.......co worker has a galaxy note 2 for verizon and found the casual for the note 2 used it for the gs3 and worked great but now im stuck
when i try to restore it fails at system.img and i cant get passed it
please if you have any idea how to fix it and get it back to stock would make my year lol
(dont want to pay for a new one)
dcasun said:
Never had to ask for help always found a way but now im stuck.......co worker has a galaxy note 2 for verizon and found the casual for the note 2 used it for the gs3 and worked great but now im stuck
when i try to restore it fails at system.img and i cant get passed it
please if you have any idea how to fix it and get it back to stock would make my year lol
(dont want to pay for a new one)
Click to expand...
Click to collapse
Have you tried the alternate restore by Imnuts? If not I would give that a shot.
Did you use Casual on a S3 or did your coworker use Casual on an S3? If you used the Note 2 version of Causal on a S3 you are most likely screwed. You would have to send it to MobileTechVideos to be JTAG'ed for $60 which is better than buying a new phone.
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
Have you tried the alternate restore by Imnuts? If not I would give that a shot.
Did you use Casual on a S3 or did your coworker use Casual on an S3? If you used the Note 2 version of Causal on a S3 you are most likely screwed. You would have to send it to MobileTechVideos to be JTAG'ed for $60 which is better than buying a new phone.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
say what? first of all you can make a jtag for like 2 bucks if you have the materials. or you can buy one on ebay for 5 bucks.
http://www.ebay.com/itm/USB-Jig-Don...Phone_PDA_Cables_Adapters&hash=item51acb6eafd
but before that, are you able to get to download mode? if you are, use ODIN to flash stock rom. make sure you have all of the proper files.
if not, then get a jig.
eboodnero said:
say what? first of all you can make a jtag for like 2 bucks if you have the materials. or you can buy one on ebay for 5 bucks.
http://www.ebay.com/itm/USB-Jig-Don...Phone_PDA_Cables_Adapters&hash=item51acb6eafd
but before that, are you able to get to download mode? if you are, use ODIN to flash stock rom. make sure you have all of the proper files.
if not, then get a jig.
Click to expand...
Click to collapse
A jig is NO WHERE NEAR the same thing as a JTAG as i have already stated many times in this sub forum and already corrected you on once. All a jig does is help you get in download mode when the phone doesn't respond to the regular ways of doing it. A JTAG is for when you hard brick your phone which is most likely what happened here.
Don't spread misinformation like that because it hurts the forums, especially when I have already corrected you once on it nicely. That does nothing but send people down a rabbit trail to purchase something that will do nothing for them unless they can't get to Download Mode. As long as you can get to Download you don't need a jig. A jig is in no way, shape, form, or fashion a JTAG and there is only one trustworthy person to JTAG your devices, that I know of, and that is the guy at MobileTechVideos.
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
A jig is NO WHERE NEAR the same thing as a JTAG as i have already stated many times in this sub forum and already corrected you on once. All a jig does is help you get in download mode when the phone doesn't respond to the regular ways of doing it. A JTAG is for when you hard brick your phone which is most likely what happened here.
Don't spread misinformation like that because it hurts the forums, especially when I have already corrected you once on it nicely. That does nothing but send people down a rabbit trail to purchase something that will do nothing for them unless they can't get to Download Mode. As long as you can get to Download you don't need a jig. A jig is in no way, shape, form, or fashion a JTAG and there is only one trustworthy person to JTAG your devices, that I know of, and that is the guy at MobileTechVideos.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
Oh crap...I'm sorry, I guess I misunderstood that last post. Thanks for clearing that up, again. :x I'm still learning too and was excited at the thought of being able to help someone else out too and got cocky.
Sent from my SCH-I605 using Tapatalk 2
If you hold down the volume down button the home button and the power button and you ARE ABLE to reach download mode you are not screwed at all....in the android development forum (as the person above me stated) there are two different ways to return stock....one has two files and the other has one file to flash back to stock through Odin...try both
JamesPumaEnjoi said:
If you hold down the volume down button the home button and the power button and you ARE ABLE to reach download mode you are not screwed at all....in the android development forum (as the person above me stated) there are two different ways to return stock....one has two files and the other has one file to flash back to stock through Odin...try both
Click to expand...
Click to collapse
i wanna say thanks to anyone who took time out there lives to wanna help i fixed the issue i just needed to odin the pit file and bam working in less then 10 seconds i really hope anyone else having the same issues with casual reads this and fixes there issue too i know i almost had a heart attack
thanks again guys
Well. My curiousty led to a hard-bricked phone
It's definetly official. I am not going to install any more custom roms after this. To make my story breif. I aquired a motorola atrix 2 phone, and had read it could accomdate a custom rom, so I used a one click root method program and the program said it had done its job. I booted into the recovery and installed the rom, which ended in an infinite reboot. Great, so I read more on how to revert back to firmware using rsd lite. I did this, but the battery was dead. so I went out and purchased anther battery, attempted the restore, phone restart, then BOOM. it stayed black and now it wont come on. wtf.
Can any please recommend the proper cable I have to order to get the phone back working>?
Sunaj1 said:
Well. My curiousty led to a hard-bricked phone
It's definetly official. I am not going to install any more custom roms after this. To make my story breif. I aquired a motorola atrix 2 phone, and had read it could accomdate a custom rom, so I used a one click root method program and the program said it had done its job. I booted into the recovery and installed the rom, which ended in an infinite reboot. Great, so I read more on how to revert back to firmware using rsd lite. I did this, but the battery was dead. so I went out and purchased anther battery, attempted the restore, phone restart, then BOOM. it stayed black and now it wont come on. wtf.
Can any please recommend the proper cable I have to order to get the phone back working>?
Click to expand...
Click to collapse
Did you flashed rom with stock recovery?
Sent from my Sony Tablet S using xda app-developers app
smgdev said:
Did you flashed rom with stock recovery?
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
Yes, I tried to. Unless i acidentally downloaded the wrong file.
Sunaj1 said:
Yes, I tried to. Unless i acidentally downloaded the wrong file.
Click to expand...
Click to collapse
You should flash roms with custom recoveries that built for your device like clockworkmod or twrp recovery.
Sent from my Sony Tablet S using xda app-developers app
smgdev said:
You should flash roms with custom recoveries that built for your device like clockworkmod or twrp recovery.
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
Yes, I am aware of that. The problem is now my phone is hard bricked and it wont turn on at all, not even to display an error message.
How can I fix this? whats that special cable That i need?
I would love to help you but I don't have the device and I think you should ask to your device's q/a forum. It will more helpful for you.
Sent from my Sony Tablet S using xda app-developers app
Sunaj1 said:
Well. My curiousty led to a hard-bricked phone
It's definetly official. I am not going to install any more custom roms after this. To make my story breif. I aquired a motorola atrix 2 phone, and had read it could accomdate a custom rom, so I used a one click root method program and the program said it had done its job. I booted into the recovery and installed the rom, which ended in an infinite reboot. Great, so I read more on how to revert back to firmware using rsd lite. I did this, but the battery was dead. so I went out and purchased anther battery, attempted the restore, phone restart, then BOOM. it stayed black and now it wont come on. wtf.
Can any please recommend the proper cable I have to order to get the phone back working>?
Click to expand...
Click to collapse
Hi, I guess you can use THIS LINK to try and fix your problem. Thank you for consulting the forums, and have a nice day.
ATkeneiville said:
Hi, I guess you can use THIS LINK to try and fix your problem. Thank you for consulting the forums, and have a nice day.
Click to expand...
Click to collapse
Thank you. But an experienced repair guy said my phone wasn't responding to neither the USB jtag or the fast boot. So my phone is dead forever? Should I start digging its grave?
Sure sounds this way, and you shouldn't be doing JTAG through the USB port anyway unless your phone is something special I've never heard of
But in truth rooting your phone won't damage it, it just gives someone the opportunity to do so. I'm a firm believer in rooting all androids so long as they read and understand what they are doing, its very hard to brick a phone if you know what you're doing
So although this phone may be dead forever (unless you find someone who for sure knows the proper way to JTAG it) then still consider rooting your next one, just be sure to completely understand what's going on, and try to stay away from one click roots, its hard to learn anything from this
Best of luck on your next phone
*side note, if you still have warranty and your phone is completely unresponsive chances are you will get your warranty exchange, just play dumb and say "I was playing angry birds and it just froze, now it won't turn on"
Sent from my Nexus 4 using Tapatalk 2
I wish I had warranty on this thing. I got it second hand from craigslist. However i've managed to acquire an HTC inspire 4G, what an upgrade from a motorola cliq xt! I would love to install jelly bean on this thing but after messing up the Atrix 2 i'm scared I will F*ck this one up too. I can never find clear and concise instructions on the internet. Every web page I visit, it seems to be someones personal way of doing it. Steps not mentioned, or instructions written for intermediate users. For example, Every video or piece of instruction i've watched on youtube regarding booting into the fast boot on the atrix 2, said something about holding volume up and power button upon booting and I would see something on the top of the screen. However that did not work, First I had to use the volume down and power button, then I would get to this fastboot screen where those recovery options werent available, from there I had to hold both volume buttons down and press the power button twice which would bring me to the recovery options screen. thats just one example, and even then for some reasons I didn't have all the recovery options the instructions spoke of... for example. Very annoying and frustrating. On a side note, is there anyone on this site who lives in the US that can unbrick my atrix 2? The guy who repair phones I took it to said theres a device for 250.00 bucks he's waiting to get that can unbrick any device. However he doesnt have the funds and had gotten laid off work. I am just having a hard time believing a simple soft user error could permanently damage my device forever and that as sophiscated as our technology has gotten there's absolutely no way to revive it.
demkantor said:
Sure sounds this way, and you shouldn't be doing JTAG through the USB port anyway unless your phone is something special I've never heard of
But in truth rooting your phone won't damage it, it just gives someone the opportunity to do so. I'm a firm believer in rooting all androids so long as they read and understand what they are doing, its very hard to brick a phone if you know what you're doing
So although this phone may be dead forever (unless you find someone who for sure knows the proper way to JTAG it) then still consider rooting your next one, just be sure to completely understand what's going on, and try to stay away from one click roots, its hard to learn anything from this
Best of luck on your next phone
*side note, if you still have warranty and your phone is completely unresponsive chances are you will get your warranty exchange, just play dumb and say "I was playing angry birds and it just froze, now it won't turn on"
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I can't attest to the videos you saw, but for most androids this is the best site with the most info, I only suggest being sure how to root before you do it, and to understand how the method works as well. When your not understanding this is when bricks happen.
I know it can be lots of reading and lots of questions but in the long run its worth the time
As for the JTAG equipment there are many who have it and you can easily spend less than 250 on getting the proper stuff.
Every logicboard is different so maybe this machine he speaks of has a wide variety of cables that come with it, but he's still paying too much
Anyway, most people seem to charge 50$ or so to JTAG it back, if that's more than the phone is worth to you just sell it on eBay for parts
Sent from my Nexus 4 using Tapatalk 2
demkantor said:
I can't attest to the videos you saw, but for most androids this is the best site with the most info, I only suggest being sure how to root before you do it, and to understand how the method works as well. When your not understanding this is when bricks happen.
I know it can be lots of reading and lots of questions but in the long run its worth the time
As for the JTAG equipment there are many who have it and you can easily spend less than 250 on getting the proper stuff.
Every logicboard is different so maybe this machine he speaks of has a wide variety of cables that come with it, but he's still paying too much
Anyway, most people seem to charge 50$ or so to JTAG it back, if that's more than the phone is worth to you just sell it on eBay for parts
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Can you link me to clear and concise instructions on how to upgrade my 2.3.7 ( i think) to jellybean on an htc inspire 4g? and is there anyone here who can fix my phone that you know of?
HERE IS YOUR PHONES FORUM
you will find links to all the guides you need here, always read the stickies in each section, this tends to have the important info you need
then anything your not sure about should be asked in the proper place within this forum for the best answers
example, question on how to root should be asked in the how to root thread for best chance of a good answer, question on how to flash a new radio should be asked in a thread pertaining to this
im sorry but i dont know enough about your phone specificly to help further but hopefully the members in your device specific forum will
best of luck!