I cannot get my Evo 3D to connect to a wireless network secured with 802.1x PEAP MSCHAPv2. I know my login/password are fine. It just hangs on the "Obtaining IP address" and retries, but never connects. I used to be able to connect to the network, but it would have problems staying connected (would show it was connected, but would not transfer data). Now I can't get it to connect. I am able to connect fine using my ipod touch.
I've searched several places and have seen that not being able to connect to enterprise wireless networks occurs across many different android phones and has been a problem for many people for years.
Does anyone have any idea on how to get it to connect? I've tried the Wifi Advanced Config to change things and manually adding the network suggestions that seem to come up the most when searching this problem to no avail.
mwalt2 said:
I cannot get my Evo 3D to connect to a wireless network secured with 802.1x PEAP MSCHAPv2. I know my login/password are fine. It just hangs on the "Obtaining IP address" and retries, but never connects. I used to be able to connect to the network, but it would have problems staying connected (would show it was connected, but would not transfer data). Now I can't get it to connect. I am able to connect fine using my ipod touch.
I've searched several places and have seen that not being able to connect to enterprise wireless networks occurs across many different android phones and has been a problem for many people for years.
Does anyone have any idea on how to get it to connect? I've tried the Wifi Advanced Config to change things and manually adding the network suggestions that seem to come up the most when searching this problem to no avail.
Click to expand...
Click to collapse
Wifi at my college campus is setup the same way, I had to use Wifi Advanced Config Editor from the Market (LINK) to correctly configure the settings for the network. The other way to do it is manually editing the wpa_supplicant.conf file in /data/misc/wifi, but it's much harder and easier to mess up.
Good luck!
Yeah, I've messed around with wifi advanced config, but haven't found any settings that work. It's weird because it used to connect. I've flashed the stock rom, my own rom based on stock, and the aosp based roms. None of them will connect.
Sent from my PG86100 using xda premium
You could try this
Open Wi-Fi Settings from Settings, Wireless & Networks If need be, write down the SSID of the 802.1x network (Case sensitive) Select Add Wi-Fi network Enter the SSID, select security 802.1x Enterprise, EAP method is PEAP, Phase 2 authentication is None, CA certificate and Client certificate are N/A, Identity is your RADIUS or Domain Authentication username, Anonymous Identity can be left blank, and Wireless password is the password to match your RADIUS or Domain Authentication password.
If you change your password you have to 'forget' the network and start again
Or you could look here
http://awebthatworks.wordpress.com/...s-ca-certificate-ias-802-1x-wireless-network/
Hope this helps.
Locked & Loaded
""shooter on Deck""
laie1472 said:
You could try this
Open Wi-Fi Settings from Settings, Wireless & Networks If need be, write down the SSID of the 802.1x network (Case sensitive) Select Add Wi-Fi network Enter the SSID, select security 802.1x Enterprise, EAP method is PEAP, Phase 2 authentication is None, CA certificate and Client certificate are N/A, Identity is your RADIUS or Domain Authentication username, Anonymous Identity can be left blank, and Wireless password is the password to match your RADIUS or Domain Authentication password.
If you change your password you have to 'forget' the network and start again
Or you could look here
http://awebthatworks.wordpress.com/...s-ca-certificate-ias-802-1x-wireless-network/
Hope this helps.
Locked & Loaded
""shooter on Deck""
Click to expand...
Click to collapse
But it is for the network which is hidden. It will not be helpful if you create for visible one.
Try the "Leap WIFI free" app from Play Store
Try the "Leap WIFI free" app from Play Store. Its an app provided by a developer called "OneGuyInABasement".
I was having the same issue where I couldn't connect to the (802.1x EAP based) Wifi network at my workplace.
I configured the network through this app and now I can connect just fine.
I am using SE Live With Walkman. In my university the Wifi network IS 802.1 EAP Secured Wi Fi. I have searched a lot but many people have said that it is not possible to use 802.1 EAP Secured Wi Fi on Ginger Bread.
If anybody was able to use wifi on GB can u help me out?
What problem do you see when you try using your Uni wifi ?
it is not connecting>
When i turn on wifi is scan and shows
UTNET
802.1x EAP.
It tries to connect than shows disconnected
Hi,
I happen to use 802.1x EAP here in my country. It doesn't work without some work on your part. I am using gingerbread without problem.
Have you modify the EAP method? There are 3 methods to choose from. You have to find out which method the access point is using. Also you have to have an account and key in your password as well.
Hope this help.
Patrick Low
Sent from my ST15i using XDA App
Please tell me which settings i have to use :
EAP MEthod : ??
Phase 2 : ??
Also somebody told me that use WIfi advanced config editor and then disable Wap_EAp but after doing that it is showing UTNET disabled
So, I bought android (4.2.2) mini pc and created a pc out of it, but I am having trouble with connecting to students network cause it has 802.1x authentication, and you login with faculty username and password.
On windows we use Securew2 software and that solves problems, but when connecting on android I cant find any options to select EAP or TTLS authentication, anyone has a clue?
I cannot connect to my school's WiFi anymore and it's really frustrating. WiFi is critical when I'm at school because there is little to no wireless network signals. It used to work on an older ROM so something WiFi related on my phone changed, as I'm the only Android student with this problem. Does anyone know how to fix it?
My school is using the following type of WiFi:
EAP type: PEAP
Phase 2 Authentication: MSCHAPv2
bump
Friends,
In my office, i can connect WIFI on my S3 mobile with my own logon credentials and i can browe\download only for few second after that i seems still connected but the data not get transmitting.
Secuity - 802.1x EAP
EAP Method - PEAP
Phase 2 authentication - MSCHAPV2
None of the tricks were worked out for me on google search. Please help me !!!
Regards,
Ranjith
Also having the same problem as OP. On a WPA2 Enterprise network at my workplace and I can't seem to stay connected. My iPad easily stays connected throughout the campus so it doesn't seem like the signal is unreliable...but on my S3, it would disconnect sometimes even while my screen is on and even when it does show that it's connected, most of the time it only shows sending packets but not receiving. Any ideas?
I'm running Archidroid v3.0, KitKat 4.4.
Thanks!