Hey XDA Members!
I have a problem with my Device.. If i wanna flash any kind of firmware, (flash via odin) i get this textbox :
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> CODE_I9300XXALF6.tar.md5
<ID:0/003> NAND Write Start!!
The blue bar is full after 1 second ..this cannot be, it takes much longer if you flash an original firmware.. i read that there can be something defect at the s3? what can this be? i cannot flash any firmware because the blue bar is filled after 1 second and then nothing more is happening..
Please help me !
I have had this problem before try making sure kies isn't running on your computer see if that works.
Sent from my GT-I9300 using xda premium
i have no kies on my pc so this cannot be the problem
Possible faulty download.
jje
Sent from my GT-I9300 using xda premium
did you install the drivers??, you have to install the latest Keis for the drivers, and kill the application.
have downloaded from samfirmware 10 times for now
and my device is detected from Odin, so the drivers are installed
i don't really know what it can be
so_ony said:
have downloaded from samfirmware 10 times for now
and my device is detected from Odin, so the drivers are installed
i don't really know what it can be
Click to expand...
Click to collapse
try on another pc...i also had a problem with odin on my pc, but tryng with another one it went all right..
Dou you haw international Sgs3???
Sent from my GT-I9300 using xda premium
Had the exact same problem, had to reinstall the drivers for it and everything went ok
Also be sure to use the USB cable that come with your SGS3!
I remember that some people had issues using another USB cable...
Reinstall drivers bet it works
Sent from my GT-I9300 using xda app-developers app
maybe u can fix it with the tool "usbdeview"
hmm... installed kies with drivers but it is not working.. can be somehting defect or is it software based .. strange thing
so_ony said:
hmm... installed kies with drivers but it is not working.. can be somehting defect or is it software based .. strange thing
Click to expand...
Click to collapse
Just Root and use mobile Odin.
Sent from my GT-I9300 using xda app-developers app
Now make sure kies is not running crlt .alt.shift processes if you see kies
End process and try again
Sent from my GT-I9300 using xda premium
SlimJ87D said:
Just Root and use mobile Odin.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
next problem is root, if i install cf root the installation script is not running after successfull flashing it on the s3, it is booting normally and CWM Manager and SuperSU is not installed but CWM Recovery is there if i go into recovery modus, strange
Related
Sorry about posting here - i tried posting in the actual thread but it told me i wasn't allowed.
Anyway i have a problem.
I'm flashing using: CF-Root-SGS2_XW_XEU_KE7-v4.0-CWM4.tar
Phone details:
Droid Version: 2.3.3
Kernal: 2.6.35.7-I9100XWKE7-CL215725
I tried flashing twice now and both files it failed.
I click start and it gets suck here:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
Sits there for like 5 minutes so i give up and turn off phone which then gives:
Code:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Windows 7 - 64bit Btw.
Samsung drivers installed from here: http://forum.xda-developers.com/showthread.php?t=961956
Cheers guys
Edit: I can reboot the phone fine - loads fine but not rooted.
Make sure no kies processes are running, check using the task manager.
Unplug phone, close odin, kill all kies, replug, check no kies, if so kill, load odin, flash.
Sent from my GT-I9100 using XDA Premium App
I have no idea what you mean by kies programs. I don't remember installing anything called kies.
I only downloaded the drivers, not the entire kies package.
Do i need to install the entire kies package?
Just tried again after rebooting pc. Still the same result
Edit:
Just installed kies, killed both processes and tried again.
It still failed. Am i using the correct kernal?
LiQuidAce said:
I have no idea what you mean by kies programs. I don't remember installing anything called kies.
I only downloaded the drivers, not the entire kies package.
Do i need to install the entire kies package?
Just tried again after rebooting pc. Still the same result
Edit:
Just installed kies, killed both processes and tried again.
It still failed. Am i using the correct kernal?
Click to expand...
Click to collapse
Yep, download newest version of Kies™.
This will install the right drivers, needed for.the PC to recognize the phone and get permissions to read/write and flash.
EDIT: what's your original kernel?
Full kernel name please.
Sent from my GT-I9100 using XDA App
Yip i installed those.
Rebooted etc.
Still not working
And your kernel was originally....?
Sent from my GT-I9100 using XDA App
BryanNL said:
And your kernel was originally....?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Phone details:
Droid Version: 2.3.3
Kernal: 2.6.35.7-I9100XWKE7-CL215725
LiQuidAce said:
Phone details:
Droid Version: 2.3.3
Kernal: 2.6.35.7-I9100XWKE7-CL215725
Click to expand...
Click to collapse
I have the same kernel. So it should be no problem.
Sent from my GT-I9100 using XDA App
LiQuidAce said:
I have no idea what you mean by kies programs. I don't remember installing anything called kies.
I only downloaded the drivers, not the entire kies package.
Do i need to install the entire kies package?
Just tried again after rebooting pc. Still the same result
Edit:
Just installed kies, killed both processes and tried again.
It still failed. Am i using the correct kernal?
Click to expand...
Click to collapse
Change usb port
Reboot computer
Uninstall and reinstall the drivers.
Try these in order
Sent from my GT-I9100 using XDA Premium App
Heya, changing USB ports seemed to work.
What do you guys recommend installing/doing now?
veyka said:
Change usb port
Reboot computer
Uninstall and reinstall the drivers.
Try these in order
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Aaaah yea! Confirm! It wouldn't work on my USB1 and USB2, only on USB3 I could get it to work. I have 4USBports.
Sent from my GT-I9100 using XDA App
Same old same old windows problems
Yeah! F*ck windows. Going to install Ubuntu ad linux again on my WIN-Machine.
I'm fed up with this W7.
Hi guys,
I wanted to ask for help because I can't root my galaxy s3. I always got stuck into this message in my Odin:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
Also I'm also having issue in installing the android 4.1. I always got stuck to system.img line.
Can you point what seems to be my problem? Thanks.
Let it finish. Wait until it reads "PASS" then REBOOTING DEVICE
Sent from my GT-I9300 using xda premium
Yes you must let it complete. I am have provided you with 2 download link.
CF-Root-SGS3-v6.4.tar - https://www.dropbox.com/s/5h01ljc3cuowltk/CF-Root-SGS3-v6.4.tar
Odin3-v1.85.zip - https://www.dropbox.com/s/ds8hs3285bjnfhm/Odin3-v1.85.zip
Step 1 - Extract then open Odin3-v1.85
Step 2 - Click on PDA and select CF-Root-SGS3-v6.4.tar
Step 3 - Connect your device while in Download mode
Step 4 - Wait until you see 'Added' and then click on start
This process normally only take a matter of seconds. This is the exact method I use and it has never failed me.
Hope this helps
saywhatt said:
Let it finish. Wait until it reads "PASS" then REBOOTING DEVICE
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Ok, but is it normal for me to wait 2 hours? I've seen youtube videos but it seems they don't took that long.
ExtraRice said:
Ok, but is it normal for me to wait 2 hours? I've seen youtube videos but it seems they don't took that long.
Click to expand...
Click to collapse
2 hours? That's insaaane! Go download what Nick fury (lol) linked..
EDIT: you are on I9300, yes?
Sent from my GT-I9300 using xda premium
What is your S3 model?
Sent from my GT-I9300 using xda app-developers app
saywhatt said:
2 hours? That's insaaane! Go download what Nick fury (lol) linked..
EDIT: you are on I9300, yes?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yeah, im on i9300.
ExtraRice said:
yeah, im on i9300.
Click to expand...
Click to collapse
Drivers installed correctly?
Make sure Kies isnt running...
Try turning off AV / Firewall...
mikep99 said:
Drivers installed correctly?
Make sure Kies isnt running...
Try turning off AV / Firewall...
Click to expand...
Click to collapse
done those already. I'll try later those link provided above once I get home. I think I got a wrong CF file because the file size is only 7mb while the provided link got 26mb.
me i hawe an other problem its detecting my phone its rroting its saying past ok success 1 failed 0 an he is restarting but the phone its not rooted on the end... i dont find the CMW in the apps list what to do
i hawe I9300 xxBvLH1
Nick Fury said:
Yes you must let it complete. I am have provided you with 2 download link.
CF-Root-SGS3-v6.4.tar - https://www.dropbox.com/s/5h01ljc3cuowltk/CF-Root-SGS3-v6.4.tar
Odin3-v1.85.zip - https://www.dropbox.com/s/ds8hs3285bjnfhm/Odin3-v1.85.zip
Step 1 - Extract then open Odin3-v1.85
Step 2 - Click on PDA and select CF-Root-SGS3-v6.4.tar
Step 3 - Connect your device while in Download mode
Step 4 - Wait until you see 'Added' and then click on start
This process normally only take a matter of seconds. This is the exact method I use and it has never failed me.
Hope this helps
Click to expand...
Click to collapse
thanks man, this one work for me.
Hi everyone I'm freaking out this is the second time i root my device s3 international the first one was with CF-Root-SGS3-v6.4 but after i installed the official jb for the uk i decided to root with Chainfire new root CF-Auto-Root v1.0 and now odin is stuck at just after i pressed start this is what it says in the message box:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-m0-gti9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
It's been like that for at least 15 minutes now I'm not sure what to do if it's safe to disconnect the phone or what.
Please help me
This is the exact same scenario as what I've had the last week. I just pulled my battery and USB cable and everything was fine. However do not try flashing a PIT file, as the problem suggests. I tried it and bricked my phone. I never found a fix for the mapping problem, my phone is off to warranty now.
Well, mine was very fast, a few seconds, nothing even close to 15mins so something went wrong for sure. The good part is that you'll probably won't have an issue to disconnect that and try again. Not sure how this works, but it probably doesn't mess with the bootloader. In that case you'll always have download mode and therefore can always try again.
Odin has hanged for me before (with my S1). Usually changing the USB port or/and rebooting computer and phone does the trick (provived you had everything working before and just hanged now for no apparent reason).
Krep3 said:
Hi everyone I'm freaking out this is the second time i root my device s3 international the first one was with CF-Root-SGS3-v6.4 but after i installed the official jb for the uk i decided to root with Chainfire new root CF-Auto-Root v1.0 and now odin is stuck at just after i pressed start this is what it says in the message box:
Pointless changing a working root for a BETA tool ..
Flash back CF root v6
jje
Click to expand...
Click to collapse
PIT means Partition Information Table.
If you even try flashing that, you will brick your phone.
Get pit for mapping error
I have tried to root my s3 using Odin 1.85 and cf 6.4 but always it sticks at the get pit mapping error.
It's a UK phone locked to the 3 network.
Any advice would be appreciated.
welshjoe said:
I have tried to root my s3 using Odin 1.85 and cf 6.4 but always it sticks at the get pit mapping error.
It's a UK phone locked to the 3 network.
Any advice would be appreciated.
Click to expand...
Click to collapse
I'm on three uk and use Odin3 v3.04 don't know weather that makes a difference
Never gets passed get pit for mapping on 3.04 too. Somebody please help.
Sent from my GT-I9300 using xda app-developers app
The other thing I found is that if I plug the usb in the front of pc while I'm on Skype with a usb mic also plugged in to the front of pc the same thing happens so it's like there is not enough power so try using a different usb port also unplug other usb things while u flash. Hope that sorts it for u bud
Sent from my GT-I9300 using xda app-developers app
CF Auto root is beta use the standard CF root 6.4 .
http://autoroot.chainfire.eu/
jje
After reading up on this it would appear that because it's locked onto the three network, I can't root it. Is this true?
Sent from my GT-I9300 using xda app-developers app
Mate I'm on 3uk rooted and rom did u try the usb thing I said about?
Sent from my GT-I9300 using xda app-developers app
The only thing plugged in is mouse. I've tried all USB ports but still the same.
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 12:13 PM ---------- Previous post was at 12:08 PM ----------
It must be something very simple.
Sent from my GT-I9300 using xda app-developers app
sorry if this sounds daft , but you do have samsung drivers installed correctly on your pc ? usb debugging checked ?
Yep. Both set and installed.
Sent from my GT-I9300 using xda app-developers app
This is my build
Sent from my GT-I9300 using xda app-developers app
Only other thing I can think of are u using the official usb lead?
Sent from my GT-I9300 using xda app-developers app
Yes I am. I used it to do the official JB update using kies and everything went fine, first time.
Sent from my GT-I9300 using xda app-developers app
Is Kies completely shut down on your pc ? I read somewhere that it can cause conflicts when trying to use odin
I read it too so I uninstalled. I then downloaded the drivers only.
Sent from my GT-I9300 using xda app-developers app
First, I tried to root and that failed. I then tried to install via odin twrp and that failed. then I went to philz via odin and that failed. Now when I boot to revocery I have the following screen - pls see pic. I am on stock 4.3.
Thx
Edit: I went ahead and wiped cache and data and am starting anew. Does this mean I can try to install a custom recovery again? It still shows the same screen as below.
Make sure if your on 4.3 that your using a recovery for 4.3 and all the newer ones are for 4.4.2 ....
Sent from my SM-N900P using Xparent BlueTapatalk 2
Epix4G said:
Make sure if your on 4.3 that your using a recovery for 4.3 and all the newer ones are for 4.4.2 ....
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
I tried chainfire's root n900p. Thats when it all started to go wrong. It wouldnt boot into cf's "special recovery" to root the phone. So, I thought I would just try a custom recovery and install a rooted rom from there.
Thats when I tried twrp 2.7.0.1 for 4.3, it did not install.
Then I tried philz touch 6.08.7: it did not install.
rosystreasures said:
I tried chainfire's root n900p. Thats when it all started to go wrong. It wouldnt boot into cf's "special recovery" to root the phone. So, I thought I would just try a custom recovery and install a rooted rom from there.
Thats when I tried twrp 2.7.0.1 for 4.3, it did not install.
Then I tried philz touch 6.08.7: it did not install.
Click to expand...
Click to collapse
What do you mean it did not install. Cam you tell us exactly what you did to try and install twrp and what happened
Cheryl
cherylbaker said:
What do you mean it did not install. Cam you tell us exactly what you did to try and install twrp and what happened
Cheryl
Click to expand...
Click to collapse
ODIN:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I let it reboot all the way. Then turn off completely. I then hold vol+, home, power to get to recovery. It says in blue, "recovery booting". It tries to boot, but it just ends up in a loop and I let it boot to the phone.
rosystreasures said:
ODIN:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I let it reboot all the way. Then turn off completely. I then hold vol+, home, power to get to recovery. It says in blue, "recovery booting". It tries to boot, but it just ends up in a loop and I let it boot to the phone.
Click to expand...
Click to collapse
I just realized I am also recieiving the prevention msg of an unauthorized attempt to access system on your device....
rosystreasures said:
I just realized I am also recieiving the prevention msg of an unauthorized attempt to access system on your device....
Click to expand...
Click to collapse
I tried again and did not let it boot all the way to the phone. I immediately tried to go into recovery. The TEAMWIN splash screen comes on, then it just loops.
rosystreasures said:
I tried again and did not let it boot all the way to the phone. I immediately tried to go into recovery. The TEAMWIN splash screen comes on, then it just loops.
Click to expand...
Click to collapse
Here is the error msg. I bet this is whats stopping it...just domt know what to do about it.
rosystreasures said:
Here is the error msg. I bet this is whats stopping it...just domt know what to do about it.
Click to expand...
Click to collapse
That is just stupid knox it doesn't stop anything
Sent from my SM-G900P using Xparent BlueTapatalk 2
Its been suggested to try the one click restore. I downloaded it, extracted using 7zip and clicked on it. The odin is blank? Is it supposed to be? I downloaded twice to be sure.
what is the difference between mj4 (which I am on) and nc5? Can I just choose either?
rosystreasures said:
Its been suggested to try the one click restore. I downloaded it, extracted using 7zip and clicked on it. The odin is blank? Is it supposed to be? I downloaded twice to be sure.
what is the difference between mj4 (which I am on) and nc5? Can I just choose either?
Click to expand...
Click to collapse
anyone?
Mj4 is jelly bean and nab NC5 are kitkat.... 4.4.2 NC5 is the newest with wifi calling .... Once you go to kit kat you can't go back so make sure you want it ...
Sent from my SM-N900P using Xparent BlueTapatalk 2
Try an older version of twrp.
Sent from my SM-N900P using XDA Premium 4 mobile app
Androidwarrior said:
Try an older version of twrp.
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Tried two different older twrp's with Odin 1.86 and I have tried with Odin 3.07, still get android recovery with the android on his back and red exclamation triangle. AND it took about 3 times of the vibration for it to boot into the recovery.
rosystreasures said:
Tried two different older twrp's with Odin 1.86 and I have tried with Odin 3.07, still get android recovery with the android on his back and red exclamation triangle. AND it took about 3 times of the vibration for it to boot into the recovery.
Click to expand...
Click to collapse
Are you able to get boot normal?
Sent from my SM-N900P using XDA Premium 4 mobile app
Androidwarrior said:
Are you able to get boot normal?
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, thankfully.
I'm thinking of trying the mj4 one click restore. Perhaps that will fix what got messed up and I can start over....
rosystreasures said:
Yes, thankfully.
I'm thinking of trying the mj4 one click restore. Perhaps that will fix what got messed up and I can start over....
Click to expand...
Click to collapse
Firmware is mj4?
Sent from my SM-N900P using XDA Premium 4 mobile app
Androidwarrior said:
Firmware is mj4?
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes. baseband and build as well.
Relash mj4 stock tar on top of what you have. You don't have to wipe anything. Then root your phone then try twrp again.
Sent from my SM-N900P using XDA Premium 4 mobile app
Androidwarrior said:
Relash mj4 stock tar on top of what you have. You don't have to wipe anything. Then root your phone then try twrp again.
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just to make sure I am clear....flash the md5 file of stock and not the one click?
i have problem with my s3 when i turn on it give me this
http://www.gulfup.com/?XbvgXn
i only can go to ODIN/Download mode, i try to flash a new software with ODIN but the problem is usb debugging is disable.
any help please .
Odin mode does not require usb debugging, if it won't connect to your pc then search for the usual solutions -hundreds of identical posts.
firstly thanks for your reply .
secondly: i search for tow hours before i post this thread .
if its not require usb debugging why this error come
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe if you use another laptop or pc then it might work
Sent from my GT-I9300 using XDA Premium 4 mobile app
"No pit" sounds like motherboard is toast.
Try a recovery firmware, a full package with multiple files, the pit, and pit+repartition on odin.
i try with another pc but give me same error
any help please
As above, your motherboard is blown.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
As above, your motherboard is blown.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
so what can i do? Dumped in trash? all my file will be deleted
Try the rescue firmware from general forum, if that fails then your emmc chip is damaged. Your data is already gone.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Try the rescue firmware from general forum, if that fails then your emmc chip is damaged. Your data is already gone.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
it is fails again, no other suggestion