Hello,
i would like to use my vodafone sip Account with the Galaxy S3 integrated SIP function.
I ve adjusted that i get asked before each call, if i wanna make the call with VoIP or Mobile. So that works, but when i choose the VoIP Method i dont get no connection. in the protocol is written, that the call was canceled.
I tried with WLAN connection and that are my configs:
Username:
"my phonenumber" (e.g. 012341234567)
Password:
"my password" (e.g.12345678)
Server:
"dialing code".sip.arcor.de (e.g. 01234.sip.arcor.de)
In the optional Config i tried setting the proxy to the same like the server and without setting it. But nothing changed for me.
Any suggestions?
cejot88 said:
Hello,
i would like to use my vodafone sip Account with the Galaxy S3 integrated SIP function.
I ve adjusted that i get asked before each call, if i wanna make the call with VoIP or Mobile. So that works, but when i choose the VoIP Method i dont get no connection. in the protocol is written, that the call was canceled.
I tried with WLAN connection and that are my configs:
Username:
"my phonenumber" (e.g. 012341234567)
Password:
"my password" (e.g.12345678)
Server:
"dialing code".sip.arcor.de (e.g. 01234.sip.arcor.de)
In the optional Config i tried setting the proxy to the same like the server and without setting it. But nothing changed for me.
Any suggestions?
Click to expand...
Click to collapse
same problem for me....
SIP Calls
Hi everyone!
Since some time I'm using Omega firmwares. To be honest, it is what I want. One of the things I liked about it, is possibility to make SIP calls. It was working somewhere around Omega v.5... Then I didn't use that feature for some time. But was keeping the Omega Firmware updated on my SGS3. After I've installed Omega v.9.1 I wanted to make a SIP call, but with no luck. There is a simple check to find out if you are able to connect to your SIP-account: just try to turn "Receive Incoming Calls" ON. I have "Failed" response. Upgrading to the Omega v.10 didn't fix the situation. I'm able to log-in to my SIP account with a desktop client. So, the question is, if it is an Omega bug or something else is wrong? I don't have enough rating yet to ask this question directly in the Omega tread. Can anyone pass it there, please?
Thanks and best regards.
Update:
Just tried to use SipDroid and CSipSimple. Both work perfectly fine. It seems like a small check-mark is missing somewhere in Settings or wherever it might be.
Sip configuration on SGS3
I've just got my SGS3 , and I found a way to configure SIP account
first launch the phone application "dialer " , then press the menu key ,,,,,,Menu --> Call Settings --> Internet Call Settings
then you'll find what your looking for
please if you find this helpful press the thanks button below
How do I set this up using like Google voice or the like
Sent from my Xoom using Tapatalk HD
cejot88 said:
Hello,
i would like to use my vodafone sip Account with the Galaxy S3 integrated SIP function.
Any suggestions?
Click to expand...
Click to collapse
have anybody found out how to configure? I tried also with Sipdroid. There I get a connection and can call, but i hear no ringphone. The other site can hear the ring and if it picks up the phone we cannot hear each other. If the other site calls me, i hear the ring but if i pick up the phone the connection will be disconnected. So i don't know if i can hear the other site and vice versa. :silly:
With csipsimple i always cannot register. I tried everthing, but do not find out what is wrong. The icon shows registering.... and then a timeout. I use the same parameters like in Sipdroid but without success
BTW: S2 with Android 4.1.1 and Vodafone/Arcor NGN-Account
Can anyone tell me the settings I should use please to make account
Sent from my GT-I9300 using xda app-developers app
Related
So I installed shed's version of cm7 yesterday and was tinkering around with settings today. I saw there is now under settings->call settings an option for internet calling with a spot to set up a sip account. Using SIPDroid I had previously setup my phone to make calls through my google voice number. Is this function now built in and if so can someone help walk me through how to do it?
edit: found this post but still no instructions http://forum.xda-developers.com/showthread.php?p=11064243
tried to set it up with this information
# Server Address: pbxes.org
# Account Name: Your PBXes Username
# Password: Your PBXes Password
but when i tried to call, it says number unreachable.
I'd love to know how to do this too!
I read somewhere (sorry, can't find the link) that this is only available on T-Mobile... since shed's build uses CM7 code for the Nexus S, the option shows up but is dead on the Eris.
mjb413 said:
So I installed shed's version of cm7 yesterday and was tinkering around with settings today. I saw there is now under settings->call settings an option for internet calling with a spot to set up a sip account. Using SIPDroid I had previously setup my phone to make calls through my google voice number. Is this function now built in and if so can someone help walk me through how to do it?
edit: found this post but still no instructions http://forum.xda-developers.com/showthread.php?p=11064243
tried to set it up with this information
# Server Address: pbxes.org
# Account Name: Your PBXes Username
# Password: Your PBXes Password
but when i tried to call, it says number unreachable.
Click to expand...
Click to collapse
I use Google Voice's free phone service. PBXes is only a PBX service that integrates multiple phone line to multiple extensions. It does not provide phone service.
Here's what to do. Goto voice.google.com and get a free number/service. Download and install Sipdroid (a free PBXes sip client) and integrate your new number. Sipdroid will allow free and easy setup to integrate Google Voice with PBXes, and you can add more extensions later when needed.
Once setup, uninstall Sipdroid and program those credentials into Internet Calling. It will register and provide inbound and outbound calling via WiFi or data. Google Voice remains a free service through 2011.
davidrol said:
I use Google Voice's free phone service. PBXes is only a PBX service that integrates multiple phone line to multiple extensions. It does not provide phone service.
Here's what to do. Goto voice.google.com and get a free number/service. Download and install Sipdroid (a free PBXes sip client) and integrate your new number. Sipdroid will allow free and easy setup to integrate Google Voice with PBXes, and you can add more extensions later when needed.
Once setup, uninstall Sipdroid and program those credentials into Internet Calling. It will register and provide inbound and outbound calling via WiFi or data. Google Voice remains a free service through 2011.
Click to expand...
Click to collapse
using sipdroid, the little indicator in the taskbar turns green, but it tries to make a call and then immediately terminates before ringing. Maybe a problem with me or my phone. Perhaps a CM7 issue? I had SIPDroing working in froyo?\
edit: tried unistalling sipdroid and entering those credentials into internet calling, states "number unreachable"
You must have Google Chat selected as a Google Voice forwarding phone. Also, Google Chat must be set up to 'enable' outbound voice calling.
I got sipdroid to work GREAT on my de-activated eris. Now im going to use my retired eris as my home phone number
only thing is, I want to stop using the sipdroid app, but get the CM7 internet calling feature to work, but it wont let me use the sipdroid credentials? anyone successfully get the sipdroid accounts setup in CM7 and remove sipdroid? I've tried all kinds of settings basing off the sipdroid account settings they all give me Account Registration errors?
So I have a bell atrix and I have tried to put my Shaw email on it and i'm 100% sure all the settings are correct yet I can not send emails. I can receive them fine. But when I go to send it says authentication error sending.
Settings are as followed:
Incoming is: pop.shaw.ca and the corresponding port.
Outgoing is: mail.1xbell.ca and the corresponding port with neither box checked.
I spent an hour at bell with a lady who was on the phone with tech support and they couldn't fix it.
PS: THIS HAS BEEN FIXED. LEFT THE USERNAME AND PW BLANK
Still need help
Bumping this.
E-mail
To help we need more information.
Please post your current e-mail settings (no passwords)
Hope this helps
MTWIZARD
Im using shaws pop settings for incoming which work. And bells outgoing which doesn't work.
Outgoing is mail.1xbell.ca
Port 25
neither box checked
Are you connected to Wi-Fi? I believe that if you're using Wi-Fi the bell settings won't work, because you should be using your ISP outgoing credentials.
What outgoing credentials did you try with Shaw?
SueDini said:
Are you connected to Wi-Fi? I believe that if you're using Wi-Fi the bell settings won't work, because you should be using your ISP outgoing credentials.
What outgoing credentials did you try with Shaw?
Click to expand...
Click to collapse
I tried all the shaw outgoing as well. I have wifi turned off and haven't used it once
I updated the OP.
I've heard of a few people having problems with sending shaw email if they're using a TELUS or Bell device, basically a non-shaw mobile device.
technically, mail.1xbell.ca should work, but you'll have to make sure you don't have the authentication option on the outgoing mail server turned on. (ie. don't use a user/name password).
What outgoing did you use for shaw shawmail.cg.shawcable.net ?
Shaw does not have a dedicated outgoing server. Have you tried setting outgoing server as smtphm.sympatico.ca ? Try and report back.
Please not by using the bell outgoing mail settings u will not be able to send email while connected to wifi. If u use Shaw in and out setting then while connected to wifi which uses shaw as the isp it will work then.
*edit
Port 587 if 25 doesn't work and try with and without authentication.
Sent from my MB860 using XDA App
I tried that server and it didn't work either.
I tried it without my username and pw and I tried it with as well.
To no avail.
Bell and shaw email
Called Bell known issue they are working with Motorola for a fix, I am pissed to as my Milestone and Samsung Galaxy i9000m all worked fine, so I see it as Motorola has altered the Adroid mail app for their liking and screwed it up.
third party apps work fine
I downloaded K9 and it works fine with the Atrix and Shaw, so until Motorola fixes the stock Android app, guess I have to use K9
third party apps work fine
I downloaded K9 and it works fine with the Atrix and Shaw, so until Motorola fixes the stock Android app, guess I have to use K9
firefight16 said:
I downloaded K9 and it works fine with the Atrix and Shaw, so until Motorola fixes the stock Android app, guess I have to use K9
Click to expand...
Click to collapse
Are you using shaws outgoing or bells?
Shaw does not support an outgoing, you have to use mail.1xbell.ca and it won't work I called Bell and there are aware of the problem. But K9 does work fine for sending, the stock app works for receiving just not sending.
This is a necro bump. I was wondering if anyone here got it working?
removing outgoing mail server user name and password worked for me. Need Bell tech support to remove from sympatico account as Bell uses a template to set up an account.
morp2
new Atrix, Bell upgrade to 2.2.2
Atrix vs Shaw - fixed
Woo Hoo!! I finally have my Atrix/Shaw thing figured out.
First I had to enable Mobile Access:
shaw.ca - Accessing Shaw email from your Android
1. Go to the "Webmail Beta site" and sign in with your Shaw email and password.
2. Select Preferences then the Mobile Access tab.
3. Select Enabled, enter your existing Shaw password and click Save. If your password does not meet the security requirements, you must change it before Mobile Access can be enabled.
Step three was what was killing me....
After that the Set-up was;
Incoming:
- pop.shaw.ca
- 110
- full email address
- password
-- Left both checks un-checked
Outgoing:
- mail.shaw.ca
- 587
- full email address
- password
-- Left both checks un-checked
Hi,
(sorry if wrong forum)
I have an SGS2 running ICS and have setup my android's SIP client (internet calling) in phone > settings > internet call settings ("Accounts" and "Use internet calling", at the bottom).
I call many international numbers through sip. If I set the option "Use internet calling" to "Ask for every call", then every time I dial a number it asks whether to use "Mobile phone call" or "Internet call". If I choose the latter, then the call is made through my sip provider saving me lots of money.
It would be really useful if there was an app that would intercept calls to certain numbers I configure and change to internet call mode on the fly. The "prefixer" app does something close with prefixing/suffixing numbers.
Alternatively, I would also be happy with a widget that allows me to switch that phone option between "Ask for every call" and "Only for Internet calls" when tapped, so I don't have to navigate through menus all the time. For a dev this shouldn't be that hard I presume since it would just alter an existing OS option.
Is there any app/widget for this?
Cheers
I'm not aware of any apps/widgets, but using ICS you can simply put those numbers in as "Internet Call" fields.
Set your outbound SIP calling preference to "Internet Calls Only," then edit each of your overseas contacts and move their international numbers into the "Internet Call" field (click "Add New Field," then select "Internet Call" from the list).
This page explains it much better;
https://support.google.com/ics/nexus/bin/answer.py?hl=en&answer=1645041
Thanks. The problem is that I visit those countries often enough to not want to do that. When I'm in that country, then I'd like to call direct s editing numbers back and forth becomes unattractive.
I found out that the "Prefixer" app actually does allow this. I match the numbers and automatically add the suffix @sip.domain.com (or whatever the SIP proxy host name is). It works but sometimes does not intercept the outgoing call so I have to be vigilant and cancel it quickly. Most of the times it works so I'm ok with the solution.
p.s. there are tons of SIP apps, some which do have call intercept features, but they don't work very well from what I found.
mastabog said:
Alternatively, I would also be happy with a widget that allows me to switch that phone option between "Ask for every call" and "Only for Internet calls" when tapped, so I don't have to navigate through menus all the time. For a dev this shouldn't be that hard I presume since it would just alter an existing OS option.
Is there any app/widget for this?
Cheers
Click to expand...
Click to collapse
On Google Play there's the SIP Switch Widget, which does what you're searching for.
You can find it here: https://play.google.com/store/apps/details?id=eu.siebeck.sipswitch (unfortunately I'm not yet allowed to post links...)
Yeah this is a bummer for me. I wish I could just hold the call button for example to see a popup internet call / not if SIP (internet calling) settings were filled in Phone Settings. Another great feature would just be to define the local area code IE:416 and everything else would be over internet calling.
Simple eh? Too bad Google couldn't figure it out
It seems Sipswitch 1.0.7 doesn't work on Kitkat
Sent from my Nexus 5 using Tapatalk
bobrock said:
It seems Sipswitch 1.0.7 doesn't work on Kitkat
Click to expand...
Click to collapse
Works for me. Dialer settings don't always show the correct settings, but calls are made with whatever the widget says they should be. To see the current settings, unload the dialer from memory, then check the selected setting.
divinemyth99 said:
Works for me. Dialer settings don't always show the correct settings, but calls are made with whatever the widget says they should be. To see the current settings, unload the dialer from memory, then check the selected setting.
Click to expand...
Click to collapse
Huh, now I was able to add the widget. It seems it works OK. Thanks for advice regarding dialer.
Sent from my Nexus 5 using Tapatalk
Just wanted to throw this out here... for those of us who want to run CM10 but depend on WiFi calling because of coverage issues.. here's something I've done that works great
Basically we're going to be using Google Voice (For the phone provider) that's linked to a SIP account (SIP is the standard for VOIP), and we're going to use Conditional Call Forwarding to ensure calls go to our google voice number when we don't have server, but connected to WiFi.
First, you need a google voice account. Once you have created an account, make sure you log in/place a call at least once using Gmail (In the google voice phone settings, there's an option to have it forward calls to "Gmail", you want to make sure that's checked as well)
Okay, once you've done that, and you have made a test call... you need to sign up for this Google Voice SIP gateway https://simonics.com/gvgw/
This will, in a nutshell, establish a gateway between google voice's gmail call interface, and a SIP account. This will allow you to use a SIP account to make calls through your google voice number. Make sure you write down/store the information the Simonics gateway gives you once you sign up, you cant get it again!
After you register with the Simonics gateway, you will be given a SIP server, a username, a "secret" (Password), the registration string isn't important unless you're going to be using Asterisk, which we are not.
Now, once you have all this information, download the app CSipSimple (Best SIP client on android) https://play.google.com/store/apps/...lt#?t=W251bGwsMSwxLDEsImNvbS5jc2lwc2ltcGxlIl0.
(Optional)
You can also get the codec pack, which will give you a wider range of codecs to use.. but I find the default just fine.
https://play.google.com/store/apps/...5jc2lwc2ltcGxlLnBsdWdpbnMuY29kZWNzLnBhY2sxIl0.
Okay! Now that we have all that done, we're going to configure CSipSimple to connect to the Simonics google voice gateway. CSipSimple has great integration with the stock dialer. Open up CSipSimple... the initial config will pop up, here you can choose to integrate it with the Android dialer (which I recommend if you're replacing wifi calling), select "Available on WiFi" (Unless you want to use this over the cellular network as well, to save on minutes, only uses data) and you can also choose if you want to allow CSipSimple to operate over mobile networks (I'm allowed to use mobile, is the option name) pick your options, then save. Now you'll be presented with a list of VOIP providers etc.. scroll all the way down and select "Advanced" configuration.
Account name: Anything you want
Caller ID: Anything you want, but I suggest either your mobile # or your google voice number
Server: Whatever the Simonic's gateway provided you, this can be different so make sure you wrote all that down!
Username: What the Simonic's gateway provided you
SIP Authentication ID: Leave this blank, it will default to the username.
Password: the "Secret" the simonics gateway provided you
There will be a checkbox that asks to use TCP instead of UDP. If you're going to be taking incoming calls on this often, I'd recommend using TCP (it's much less battery intensive than UDP). UDP is the preferred method, but it will use a LOT more battery if you plan on being connected often.
Proxy: same exact thing here as "server", example: mine is gvgw3.simonics.com
Save that.
If everything is correct, after you save the account should register, and turn green showing "registered"
Okay! Now we can make calls using our google voice account, so let's test it and make sure it's working. Go ahead and hit "Accounts" at the top left (The "back" arrow) or simply hit the back softkey. This should take you to the dialer (This is CSipSimple's dailer, but CSipSimple has also integrated with the stock dialer, so when you make a call a menu will pop up asking if you want to use your Google Voice SIP gateway account, or regular mobile network.. if you don't want this menu every time you make a call, I suggest turning off the "I'm allowed to use mobile network" feature and turn off android dialer integration)
Dial this number: 1 354 415 1595 - This is what's called an ECHO test line, it's a regular land-line number.. you should hear a voice saying hit "1" for an ECHO test, "2" for music on hold. Hit the 1 key, and start talking. You should hear an echo of your voice... if you hear yourself talking, GREAT! Outgoing calls are working!
Now we want to configure what's called Conditional Call Forwarding/Unconditional Call Forwarding so that all calls to our mobile number will be forwarded to our google voice number when we do not have a signal (or in the case of unconditional, always), you can also set up what's Unconditional Call Forwarding... this is useful if you want to have calls forwarded to your google voice number no matter what. I usually turn off the radio when connected to WiFi though (saves a lot of battery), to ensure I don't have a mobile signal ****YOU WILL NOT RECEIVE TEXT MESSAGES IF YOU DO THIS****, so it's up to you if you want to turn the radio off or not. If you don't, you'll need to use unconditional call forwarding.
Now here's the deal: WIth T-Mobile, Conditional Call Forwarding (THIS IS VERY IMPORTANT) is limited to a total of 500 minutes per billing cycle. It doesn't matter if you're on unlimited, 1000 minutes, whatever. You get a TOTAL of 500 Conditional Call Forwarding minutes each cycle. Yes, it sucks. But that's what we have to deal with if we want to use CM10 with functional wifi calling that rings you when someone calls your mobile number. If you want to avoid using these minutes, you can simple call the person back (Using your SIP account), or give your google voice # (instead of mobile number) when someone calls you, and have them call you right back. ALSO, Conditional Call Forwarding is what forwards calls to your voice mail, so if you use it, MAKE SURE TO SET IT BACK TO THE NUMBER IT WAS AT ORIGINALLY, OR CALLS WILL NOT GO TO YOUR VOICEMAIL. You can see what this number is by using the short code # # 62 # in your dialer, using your mobile network.
There's several modes of conditional call forwarding. Forward if BUSY, Forward if NO REPLY, Forward if NOT REACHABLE (no signal). You can set up forwarding to your google voice for any of these, but I only recommend NOT REACHABLE, because it simply doesn't make sense for the other two. There's several ways to configure call forwarding. I recommend using the stock dialer's built in feature, but you can also use Short Codes to activate it. Open the stock dialer, click the menu button, then settings. Near the bottom of the Settings, there should be a "Call Forwarding" option. In there you'll see all three forwading settings (Busy, not reachable, unanswered) as well as the original number it's set to (your voicemail). All you do is simply change the "Forward when unreachable" to your google voice number. Remember, for this to be in use 100% of the time you're on WiFi, you will have to turn off your cellular radio. If Text Messages are important to you, I recommend using UNCONDITIONAL (Always Forward in the dialer->forwarding settings).. this will have calls forwarded to your google voice number NO MATTER WHAT, so make sure you turn it off when you leave WiFi.
Unconditional Call Forwarding, on the other hand, deducts from the minute plan you subscribe to. You can still use the above methods to avoid using your minutes, but just be aware that if you use unconditional call forwarding it WILL deduct from your minute bucket.
Please be aware that you have to have a mobile signal to configure call forwarding, so you need to turn it on before you leave service/enter wifi, or simply always have Unconditional Forward if Not Reachable forwarded to your google voice number. Honestly, I use Google Voice for my voicemail as well, so I have all three of my forwards always set to my Google Voice number, you might want to consider this option as well, as it makes it much more seamless. You can use the Google Voice app for visual voicemail as well as free transcription, and it's much much better than T-Mobile's solution.
Here's a list of short codes for call forwarding: http://support.t-mobile.com/docs/DOC-4319
These are very useful if you plan on using Tasker to automate any of this (This is what I do, to make the process very seamless when I enter WiFi)
I know this isn't nearly as simple as the stock wifi calling solution, and it doesn't integrate nearly as well... but it works. Once you have this configured, you'll be able to receive/make calls on WiFi without issue. You'll also have a method of calling using your data connection that doesn't use minutes if you need that, as well. There's other ways to do this, such as using an app such as "Groove IP" or "Talkatone", and those work very well. I prefer the SIP gateway method, because I can configure a SIP softphone on any number of devices, including my android device. For those standalone apps such as "Groove IP", you would do pretty much the same thing, but you don't need the Sip Gateway, and you also wouldn't need CSipSimple (which I find is superior to all the other VoIP apps)... all you would do is simply configure Unconditional/Conditional call forwarding to your Google Voice number and use whatever app you want. You could also use Android's build in SIP functionality (it's built into the dialer!) But I find it very unreliable and couldn't get it to register reliably with the SIP gateway... but that might be a great option as well.
Please title this correctly.
This is 'How to get Google Voice working on your phone'... Not a viable workaround for 'cell-service-over-WiFi' style wifi calling.
Notes:
1) Monthly4G customers DO NOT HAVE conditional forwarding
2) This does not allow you to recieve MMS.
3) The only way you can use google voice with your real mobile-number is if you port it to Google, at which point you will never get MMS at that number again (because GV can't handle it properly)....
Now, does it work to have a usable phone at home w/o service? Sure, on a different number & with limited messaging...
But it is not a true WFC workaround.
dcacklam said:
This is 'How to get Google Voice working on your phone'... Not a viable workaround for 'cell-service-over-WiFi' style wifi calling.
Notes:
1) Monthly4G customers DO NOT HAVE conditional guys over on nal forwarding
2) This does not allow you to recieve MMS.
3) The only way you can use google voice with your real mobile-number is if you port it to Google, at which point you will never get MMS at that number again (because GV can't handle it properly)....
Now, does it work to have a usable phone at home w/o service? Sure, on a different number & with limited messaging...
But it is not a true WFC workaround.
Click to expand...
Click to collapse
Well yeah I'm quite aware of the limitations. There's really no other viable alternative at the moment. Maybe someone can get the kineto app and libs from the sensation working but I highly doubt it, as the guys over on the sensation forum have been trying for a while now... Basically it's up to t mobiles, haha. I believe the only working device with jelly bean and wifi calling is the note 2, and sgs3....and once again its deeply embedded within the touchwiz framework.. The guys over on sgs3 forum even have a 350$ bounty for a non touchwiz working port. Doesn't look very promising but it's to be expected with something like uma... Maybe someone will figure it out. For someone who works in a complete t mobile dead zone, the only other viable option is sticking with Ics, and that's simply not something I want. Then again, I've always basically given my gvoice number out, and no MMS is very little impact considering you can send stuff over email, and every single carrier seems to have an email gateway... It is a major pain to have people send stuff to your Gmail acct. Instead of regular MMS, though,.... It's definitely not Ideal but it's a lot better than no service, an using ICS/sense builds.
I wasn't aware that monthly 4g didn't get conditional, kind of sucks. Could always use unconditional, if most people use your mobile number you would completely be dropping messages so i do understand the hesitation on that. I've been wanting sms/MMS. Forwarding options for a long time now, would be nice if carrier sms could utilize xmpp or sip messaging to handle sms forwards, but sms is another huge hack job that sorely needs replacement and MMS just a fancy if not severely limited email.
So yeah man, not many other options out there right now. If you're someone who relies on sms/MMS heavily and most contacts use your mobile number, I can definitely see where that would be an issue. Most people I communicate with on a daily basis are very tech oriented, so it's honestly not that big of a deal breaker (to me). I've just found that the Sip gateway and CSipSmple work orders of magnitude better than any stand alone app implementation. If you have any alternatives (besides using ics/sense builds) I'd love to know them, I was a huge user of wifi calling (about. 70% of all my calls) so i'm open to try everything.
Lol get your friends and family to get viber you get to keep your number and sms and MMS and since these days every one has a smart phone an app like viber is quite nice especially if everyone had it on their phones... That's what I use when I don't have signal and have told friends and family to reach me on viber if they can't otherwise
Sent from my Amaze 4G using xda app-developers app
ericdjobs said:
I wasn't aware that monthly 4g didn't get conditional, kind of sucks. Could always use unconditional, if most people use your mobile number you would completely be dropping messages so i do understand the hesitation on that. I've been wanting sms/MMS. Forwarding options for a long time now, would be nice if carrier sms could utilize xmpp or sip messaging to handle sms forwards, but sms is another huge hack job that sorely needs replacement and MMS just a fancy if not severely limited email.
Click to expand...
Click to collapse
If you use 'unconditional forward' then you will never get another call again. All your calls will be forwarded to G-Voice, which will send them to G-voicemail.
We'll see about wifi calling.
BTW, the Kineto/UMA app does run on our CM9. There's a kernel driver missing for GAN, and of course CM9 does not have data. It crashes on CM10 because of a missing native library for audio-recording...
The Movial/IMS app (From Amaze Stock) runs on CM10 but the setup screen is full of sense rubbish... However the Sense rubbish might be wrapp-able back to stock-Android, but that is a long-shot...
Skip all steps and install groove ip. And sign in with your Google voice login
Sent from my HTC_Amaze_4G using Tapatalk 2
dilfatx said:
Skip all steps and install groove ip. And sign in with your Google voice login
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
Yeah you can do that if you want, and it's definitely a much more simpler approach and it should be sufficient for most people.
But the SIP method gives you much more flexibility, like the option of using Speex/GSM codecs (which compensate for jitter and packet loss) while Groove IP hooks directly into the google talk API, thus you are stuck with G.711 mu-law codec, and that's not the best option all of the time. Using Speex/GSM codecs will give you slightly reduced call quality but much better reliability and they are much more resistant to congestion network situations or high latency.. it's a better calling experience all around IMO.
Also, using a SIP solution you're able to hook into an asterisk server if you so desire (which is important to me, personally) and manage multiple lines using one softphone.
At the end of the day though, if you have access to fast, reliable wifi whenever you need to make calls, Groove IP gets the job done just fine. But for someone who wants a lot more functionality and features, using the SIP gateway will provide that. Also, you can use it as a trunk for an asterisk server, for those of us who utilize that sort of thing.
Android stock dialer
Hi, thanks for sharing this! I was wondering if there's a way to configure this directly in Android's stock dialer (just as can be done with pbxes.org)? Thanks!
As the title says.
I I have been trying to configure my galaxy s2 so I can use the default SIP client in the native dialer to make phone calls over my at home wifi connection.
So far the closest I have gotten is the phone will dial the number but then I get a time-out.
I can use the MajicJack app on the phone to make calls over this same wi-fi. But when I try to use the native dialer to make calls I cant get it to work.
Any ideas?
I currently use iptel.org as my sip account.
Im not sure if I need to port forward on my router? Or maybe Im not inputting the "optional settings" in properly in the native dialer settings. Anyone have any ideas?
Im still learning about how to do this stuff. Need to be noob friendly please.