I started up my Gtab today (running ICS 4.0.x), and it keeps popping up stating "Encryption unsuccessful
Encryption was interrupted and can't complete. As a result the data on your tablet is no longer accessible.
To resume using your tablet, you must perform a factory reset. When you setup your tablet after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account."
WTF?
I tried booting into recovery mode, but it hangs after stating "Recovery key detected, Booting recovery kernel image"
That's all it does....
Any suggestions on how to correct this?
Thanks ahead of time...
Gun
GunRunner said:
I tried booting into recovery mode, but it hangs after stating "Recovery key detected, Booting recovery kernel image"
Click to expand...
Click to collapse
1. As the message says you'll most probably have to do a "wipe data/factory reset" in CWM. Run the command in this post.
2. Which version of CWM do you have?
Im not certain what version CWM is but it was the most up to date at the time. I cant access CWM as it sits now.
Should I try to use NVflash to rerun the Full_Stock_NVFlash_CWM_5504_Touch-1, just as I did before I installed ICS?...then reinstall the rom?
I can not access CWM...it locks up after stating "booting recovery kernel image"
GunRunner said:
I started up my Gtab today (running ICS 4.0.x), and it keeps popping up stating "Encryption unsuccessful
Encryption was interrupted and can't complete. As a result the data on your tablet is no longer accessible.
...
Click to expand...
Click to collapse
The usual reason for that error message on ICS is a corrupted /data partition. To fix it you'll have to do either a "wipe data/factory reset" or a repartition the internal SD card in CWM.
GunRunner said:
I can not access CWM...it locks up after stating "booting recovery kernel image"
Click to expand...
Click to collapse
The most common reason for that is
a) using the wrong version of CWM for the bootloader installed on the system--ie. using a recovery containing a 1.2 kernel on a 1.1 bootloader or vice-versa.
OR
b) a corrupted recovery partition.
To fix both on ICS--esp. if you've used the nvflash package in the TeamDRH ICS OP--try reloading only CWM-5.5.0.4Beta15 using nvflash.
Can you tell me what you were doing before all this happened? I can understand the /data partition becoming corrupt, or, the recovery kernel being the wrong one (or the partition being bad), but, I can't figure out how both can happen at the same time without something explicitly being done to cause it.
Not sure if it helps but I am also getting this error, I will update as I attempt to troubleshoot.
ROM: G_Harmony_ICSv1.5(120)(SuperCharged) (4.0.4)
CWM: 2.5.1.1-bekit-0.8
I got both errors but the second was solved by unplugging my computers USB cable from the g-tab.
(I can not access CWM...it locks up after stating "booting recovery kernel image") SOLVED
Steps:
1. From the settings picked factory reset loose all data and SD card data.
2. Reboot to recovery (CWM).
3. Formatted the internal SD card and ExSD card using CWM.
4. Mounted SD card on computer using USB cable connected to the G-Tab.
5. Let windows format the SD card. (Was this bad?)
6. Loaded ROM.zip file over to SD card from computer.
7. wipe data/factory reset.
8. wipe cache partition.
9. install zip from SD card -> coose zip from sdcard -> G_Harmony_ICSv1.5(120)(SuperCharged).zip
10. Install.
11. Reboot.
12. Error screen "Encryption unsuccessful Encryption was interrupted and can't complete. As a result the data on your tablet is no longer accessible...." "Press this button to do a factory reset"
13. Press the button to the same results.
Click to expand...
Click to collapse
UPDATE 1:
When I did a rewipe i found that when i did the data wipe is said:
-- Wiping data...
Formatting DATA...
E:Can't mount /dev/block/mmcblk3p2
(No such file or directory)
Error mounting /data/!
Skipping format...
Formatting CACHE:...
Formatting SDEXT:...
No app2sd partition found. Skipping format of /sd-ext.
Formatting SDCARD:/android_secure...
Data wipe complete.
Click to expand...
Click to collapse
Could it be that when I used my computer to format the SD card I did it wrong?
UPDATE 2:
I was browsing around the CWM options and I found:
advanced -> Partition SD Card
Click to expand...
Click to collapse
So I did that and then a data wipe again, and this time it said:
-- Wiping data...
Formatting DATA...
<<NOTE THE LACK OF ERRORS>>
Formatting CACHE:...
Formatting SDEXT:...
No app2sd partition found. Skipping format of /sd-ext.
Formatting SDCARD:/android_secure...
Data wipe complete.
Click to expand...
Click to collapse
I am hoping things should work now, I picked 2GB with a 0MB swap.
UPDATE 3:
Ok... should have figured that deleted my SD card files including my ROM "G_Harmony_ICSv1.5(120)(SuperCharged).zip" so I mounted it and copied it over again.
(I also did some mounting and unmounted and may have lost it there.)
UPDATE 4:
IT WORKS!! fixed, must have been because I formatted out the data partition, but CWM fixed this for me!
I hope this helps others with the same issue.
A while ago, I decided to work on my old legend and upgrading it with new custom roms.
After factory reset, I have flashed CM10 rom from here and discovered my Hboot version is 0.43 and not compatible with this rom.
So I found this rom instead and made 3 different partitions as instructed. But I have discovered that my phone have lost ability to go to recovery mode during the process and cannot recognize the zip files from SD card although its still in there. I have reformatted the SD card again with one fat32 to see if its problem with partitioning but it is still having same problem.
I can see the red triangle with ! in it and selected "Apply sdcard:update.zip" which keeps giving me error message "E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) Invalid argument"
Is there any solution to get out of this situation?
Thank you for your patience
Yhcho said:
A while ago, I decided to work on my old legend and upgrading it with new custom roms.
After factory reset, I have flashed CM10 rom from here and discovered my Hboot version is 0.43 and not compatible with this rom.
So I found this rom instead and made 3 different partitions as instructed. But I have discovered that my phone have lost ability to go to recovery mode during the process and cannot recognize the zip files from SD card although its still in there. I have reformatted the SD card again with one fat32 to see if its problem with partitioning but it is still having same problem.
I can see the red triangle with ! in it and selected "Apply sdcard:update.zip" which keeps giving me error message "E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) Invalid argument"
Is there any solution to get out of this situation?
Thank you for your patience
Click to expand...
Click to collapse
I have followed this thread and I got an error message saying failed due to low battery. I will just charge the phone for a while and see if it gives same error.
I have done the fastboot recovery method from here and its keep giving me "failed (remote: not allowed)" messages.
my Legend is already rooted and currently on S-off.
I have solved the problem.
It was memory card problem. my legend works after installing CM7 using different SD card.
I am suspecting if its because I have messed up something with memory card while dividing partitions to install a Jelllybean rom,
However the faulty memory card is still functioning well on my pc which made me think there is no problem with it.
Hi, I was installing a ROM and I formated /system and rebooted but the ROM didn't work it repeatedly said process android sopped or something like that, so I rebooted to CWM recovery and was going to restore from my external SD card but there wasn't an option for that there was an option to restore from internal SD card but it said no files found so now i'm in cwm recovery and when I try to reboot the samsung logo appears and disapears constantly and nothing happens. The CWM recovery version is 6.0.4.4. I have the restore file on my PC. Is there any way I can send it to internal SD card? I can't access it even on my computer because the phone isn't fully booted. Please help me
My phone is Samsung Galaxy S2 and PC is Win8
Hi guys. A little help please. I can't seem to get my phone to see my internal SD card after repartioning my phone. Followed the instructions to the letter on http://forum.xda-developers.com/showthread.php?t=2538947. Everything went smoothly. And restored my nandroid backup of slimkat but now I can't get into my SD. Also, now my PC can't even see my phone. Windows keeps saying device is broken. Everything works except internal memory. I tried to mount SD in recovery with no luck. I remember there were SD mounting problems with kk so I also tried flashing slimbean 4.3 but also unsuccessful. Any help or suggestions would be appreciated....
Edit: after flashing, recovery says "unable to mount / 'emmc'". Also, after boot, I get a notification "Blank SD card- SD card is blank or has unsupported filesystem".
Problem solved! After hours of reading posts with nothing working I decided to try a cwm recovery kernel (I have been on twrp forever). I was able to mount the internal SD card with cwm! Flashed tarp back and flashed slimsaber and like magic everythings working again!!
I have got a major issue go with my S3. I had lost my IMEI number but managed to get it back then over night it mysteriously vanished again. SO I went to install a back from nandroid...this is when it went wrong.
I went into philz and formatted everything.....and this is where i think i borked the internal memory.
I have since tried to
Install Omega v58 and it just sticks on on the start up omega droid walking.
Install stock ROM via Odin but it just hangs on the Samsung logo.
I have rerooted the phone but when i go into CWM to try to apply update zip ( as i read somewhere else to do ) i get the following
E: can't mount /sdcard/update.sip
if I try to chose zip from sdcard i get the following
E: can;t mount sdcard
If I try to mount the sdcard i get
Error mounting /sdcard!
Error mounting /efs!
Could someone please give a total idiots guide on how to rescue my phone please.