I have a Galaxy tab 10.1 Wifi (GT-P7510)
I tried to load a boot loader onto it but it didn't work. Now no combination of buttons will make it got to a logo or any of the bootscreens (recovery or download)
However It will eventually turn it's self on and otherwise works perfectly fine, i can do everything but boot into recovery download and wont turn it on when i want it to. So i can use it but i'm stuck with an unfinished ICS rom and i can't flash any other roms in the future (Nor make backups). I have also tried to use ROM manager to flash and it just turns its self off and won't boot.
So is there anyway to flash it to get back into recovery/download mode or better yet are you able to flash the device while its on.
P.S connects to computer fine in MTP mode and i can search the internal sd (copy paste etc.)
Related
Hi, i have a galaxy tab 10.1 wifi only (GT-P7510)
Recently i rooted my tab and it was all good. I flashed a ICS rom (AOKP_p4wifi_milestone-4) and kernel (2.6.36.4 cynogenmod + pershoot #1) on it also worked just fine.
However i wanted to get rid of the triangle on the bootscreen so i stupidly googled a solution without checking it. Flashed the wrong bootloader and now my tab won't boot into recovery, wont boot in to download, Isn't recognised by ODIN
BUT
It will eventually turn it's self on and otherwise works perfectly fine, i can do everything but boot into recovery download and wont turn it on when i want it to. So i can use it but i'm stuck with an unfinished ICS rom and i can't flash any other roms in the future (Nor make backups). I have also tried to use ROM manager to flash and it just turns its self off and won't boot.
So is there anyway to flash it to get back into recovery/download mode or better yet are you able to flash the device while its on.
P.S connects to computer fine in MTP mode and i can search the internal sd (copy paste etc.)
Also I'm a noob
Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
cugami said:
Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
Click to expand...
Click to collapse
GO here : http://forum.xda-developers.com/showthread.php?t=1993044
Hi, today I tried to downgrade my Galaxy S3 from Cyanogen 12 to stock firmware (So from Lollipop to Jellybean) but now it's stuck on the bootsceen and I can't access the recovery mode, I can just access download mode.
Hi Hencick - Welcome to XDA.
I'll just naturally assume that you're familiar with flashing roms...
Were you running a custom kernel with CM?
Can you access adb functions with a pc?
I have a similar problem on my phone I discovered today. I just get the Samsung logo on screen, it goes off, then comes back (bootloader loop i guess).
It was just sitting on charge. It hasn't done anything for a while other than updates, now when I come to it, it's like this.
I can't get into recovery mode, adb mode, download mode or anything. Just the Samsung logo flashing up, then going and coming back up.
Is this recoverable?
As it it keeps powering up, then off, then back up I'm not even sure I can use Odin on it.
TIA.
Edit: Ok, I can get it into download mode it seems. Only, now I'm not sure what to do! lol
I had a korean 4.4 rom on my galaxy s3, it was rooted I tried to go to recovery to try out cm 14.1, I couldnt get in trough key combo so I used application, did everything like many times before and after all installed, the phone rebooted and got stuck at cm loading screen. tried to leave battery out over night and then inserted battery and let phone turned on for a while and nothing worked, still could not get to recovery or download (none of the keys are working) so i load up odin and insert the jig, i get to download mode, try to reflash twrp, nothing i tried cwm and still nothing. I install everything back to stock and i get stuck at samsung logo (sound of the bootup silences halfway trough but led slowly fades and back on aggain )
So to cut it short, everything is working but i cant get the phone to boot and the key combo doesnt work (keys are ok and functioning properly otherwise) is there any way to get to recovery if you cant boot the phone and key combo doesnt work ?
Nope. There is no way to communicate with the device. You'll have to fix the buttons.
Beamed in by telepathy.
How do I do that ? The keys as I said are working, I have tested them before the brick. What could be the reason for the phone not going into download/recovery mode?
So I have a Samsung Galaxy SII i9100 that I haven't used in months because the USB port wasn't working, therefore, cannot charge. I fixed it today, charged it and it as working (it as slow though, running CM13)
I wanted it to downgrade it back to JB so I can give it to mom but I didn't flash a suitable recovery first, so I flashed JellySnap ROM on TWRP recovery for CM13 and now it's stuck on bootloop (reboots every 4 seconds but skips the Samsung GS2 intro)
No the big problem is that the home button along with the menu key and the back key don't work, so I can't boot into recovery or download mode, so can't use ODIN.
Is there anything else I can do? Can I get to flash it or wipe it or at least access recovery/download mode through the PC (adb?) or using another phone via OTG?
zedex39zeo said:
So I have a Samsung Galaxy SII i9100 that I haven't used in months because the USB port wasn't working, therefore, cannot charge. I fixed it today, charged it and it as working (it as slow though, running CM13)
I wanted it to downgrade it back to JB so I can give it to mom but I didn't flash a suitable recovery first, so I flashed JellySnap ROM on TWRP recovery for CM13 and now it's stuck on bootloop (reboots every 4 seconds but skips the Samsung GS2 intro)
No the big problem is that the home button along with the menu key and the back key don't work, so I can't boot into recovery or download mode, so can't use ODIN.
Is there anything else I can do? Can I get to flash it or wipe it or at least access recovery/download mode through the PC (adb?) or using another phone via OTG?
Click to expand...
Click to collapse
What you mean "home, menu and back button don't work"? They are broken or you can't use them to get into recovery or download mode? You may be able to make or but a JTAG to get into download mode. If you get this far, you should be able to flash a recovery/kernel or stock rom with odin. Otherwise, you may have to take it to a repair center