So, my phone fell down from the sofa, and battery fell out. When I put it back in and turned on, phone was in in an infinite bootloop. So, what can I do to fix it? It had android 2.1 on board. I once had root, but then I factory reseted my phone. It was somewhere a year ago. Can someone help me?
REFLASH
Use odin..
Flash your stock firmware
Thats the only thing you can do..
vedant.kamlaskar said:
Use odin..
Flash your stock firmware
Thats the only thing you can do..
Click to expand...
Click to collapse
You anwsered a 2 year-old topic?!?!??!
Vagelis1608 said:
You anwsered a 2 year-old topic?!?!??!
Click to expand...
Click to collapse
nothing els to talk about on galaxy 5
the threads are so empty
vedant.kamlaskar said:
nothing els to talk about on galaxy 5
the threads are so empty
Click to expand...
Click to collapse
I know :/
Go to madteam.co. There is more activity there (not a lot :/ )
Vagelis1608 said:
I know :/
Go to madteam.co. There is more activity there (not a lot :/ )
Click to expand...
Click to collapse
Been there... Done that...:laugh:
why we dont have dual touch on this phone,i have x10 mini pro an instal cm7 and i get dual touch,but when i installed cm7.2 on gt-i5500 no dualtouch
Nicky SpeedTouch said:
why we dont have dual touch on this phone,i have x10 mini pro an instal cm7 and i get dual touch,but when i installed cm7.2 on gt-i5500 no dualtouch
Click to expand...
Click to collapse
Cm has fake multi dual touch, use that. The phone lacks the hardware.
I tried doing that. I got the .tar from sammobile and all I get is:
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I5500XWJQ3_I5500OXXJPC_I5500XWJP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Ok. I was able to resurrect it. Following the instructions in Install ClockworkMod Bootloader and Cyanogen 7 ROM to Samsung G5 I5500 by sparkyuiop. Downloaded OPS, downloaded the original Polish .zip package for the phone. IIRC 191 MiB and copied it on Win7 with odin 4.28.
Amazing.
Related
Hi all,
I have a weird problem with my GS2. Im used to use Odin because I had a GS and i tried every ROM post on XDA .
I always solve my prob by myself but this time I need ur help.
My phone running KE7 and lighting 1.1. Since 2 weeks when I try to install an app, when I progress in a game, when I restart everything isn't here anymore. But the weird thing it's for my SMS/Photo ... etc I have everything !
My FB or Tweet Statut get stuck to 2 weeks before... I have to refresh and got new statuts. When I restart it come back at 2 weeks...
I tried a full wipe with CWM, it pass, but I still keep all the program and customisation of before.
I tried a fresh install with Odin (fresh KE7 or the new KF1 with all files) and i always have the same fail.
<ID:0/030> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XWKF1_CL265340_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKE7_REV_02_CL1017274.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OJVKE4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/030> Odin v.3 engine (ID:30)..
<ID:0/030> File analysis..
<ID:0/030> SetupConnection..
<ID:0/030> Initialzation..
<ID:0/030> Set PIT file..
<ID:0/030> DO NOT TURN OFF TARGET!!
<ID:0/030> Get PIT for mapping..
<ID:0/030> Firmware update start..
<ID:0/030> boot.bin
<ID:0/030> NAND Write Start!!
<ID:0/030> Sbl.bin
<ID:0/030> param.lfs
<ID:0/030> zImage
<ID:0/030> factoryfs.img
<ID:0/030> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/030> Removed!!
Click to expand...
Click to collapse
5 times in a row...
Can u help me ? I dunno if ur understand me well cause english isn't my mothertongue !
Thks All in advance!
I have the same problem now, I can't flash with Odin because of the same message : "Complete(Write) operation failed."
Did you find a solution already?
EDIT : I used a different usb port and it worked.
Gils3310 said:
Hi all,
I have a weird problem with my GS2. Im used to use Odin because I had a GS and i tried every ROM post on XDA .
I always solve my prob by myself but this time I need ur help.
My phone running KE7 and lighting 1.1. Since 2 weeks when I try to install an app, when I progress in a game, when I restart everything isn't here anymore. But the weird thing it's for my SMS/Photo ... etc I have everything !
My FB or Tweet Statut get stuck to 2 weeks before... I have to refresh and got new statuts. When I restart it come back at 2 weeks...
I tried a full wipe with CWM, it pass, but I still keep all the program and customisation of before.
I tried a fresh install with Odin (fresh KE7 or the new KF1 with all files) and i always have the same fail.
5 times in a row...
Can u help me ? I dunno if ur understand me well cause english isn't my mothertongue !
Thks All in advance!
Click to expand...
Click to collapse
The same happened to me after I downloaded a corrupted file. You cold try to download the file again and reinstall the ADB drivers.
Congrats on necroing a 2 yr old thread.
MistahBungle said:
Congrats on necroing a 2 yr old thread.
Click to expand...
Click to collapse
Haha sorry I noticed after my Submit
Hey guys I just bought this phone from newegg...
http://www.newegg.com/Product/Product.aspx?Item=N82E16875176292
Can I upgrade it to ICS?
ragingazn628 said:
Hey guys I just bought this phone from newegg...
http://www.newegg.com/Product/Product.aspx?Item=N82E16875176292
Can I upgrade it to ICS?
Click to expand...
Click to collapse
yes you can
wow! the overview of the youtube video chick is hot!
How come I go to update and it says no update???
ragingazn628 said:
How come I go to update and it says no update???
Click to expand...
Click to collapse
Where abouts do you live? It may not have been officially released in your area yet, or by your network provider yet.
themadba said:
Where abouts do you live? It may not have been officially released in your area yet, or by your network provider yet.
Click to expand...
Click to collapse
I live in the US I have Tmobile
do I need to root my phone before I can update with other methods?
http://forum.xda-developers.com/showthread.php?t=1544487
ragingazn628 said:
I live in the US I have Tmobile
Click to expand...
Click to collapse
So given this, you DO realize that if you did actually get the I9100, and you are on T-mobile USA, you will never get faster than Edge mobile data speeds... Right?
EDIT to add: before you ask (and I'm sure you would have), no, there is nothing you can do to fix this. The phone lacks the necessary antenna hardware to receive one of the frequencies T-mobile USA requires for high speed mobile data.
Also, I live in the US, and I'm on ATT, and I've NEVER been able to get Kies to update my phone. I've just used Odin to flash firmwares myself.
ragingazn628 said:
do I need to root my phone before I can update with other methods?
http://forum.xda-developers.com/showthread.php?t=1544487
Click to expand...
Click to collapse
No. Odin does not require root.
There u go...
Sent from my GT-I9100 using xda premium
ctomgee said:
So given this, you DO realize that if you did actually get the I9100, and you are on T-mobile USA, you will never get faster than Edge mobile data speeds... Right?
EDIT to add: before you ask (and I'm sure you would have), no, there is nothing you can do to fix this. The phone lacks the necessary antenna hardware to receive one of the frequencies T-mobile USA requires for high speed mobile data.
Also, I live in the US, and I'm on ATT, and I've NEVER been able to get Kies to update my phone. I've just used Odin to flash firmwares myself.
No. Odin does not require root.
Click to expand...
Click to collapse
Why am I getting this error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP4_I9100XXLPS_I9100LUXLP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
I'm on this step:
Click PDA and select *.tar.md5
ragingazn628 said:
I live in the US I have Tmobile
do I need to root my phone before I can update with other methods?
http://forum.xda-developers.com/showthread.php?t=1544487
Click to expand...
Click to collapse
GT-I9100s do not receive updates from Samsung for the US market as there are no US carriers that sell this model. AT&T sells the SGH-I777, TMobile USA sells the SGH-T989, Sprint sells the SPH-D710.
You can use odin to update official firmwares without root.
I'm trying to flash using this:
I9100XWLP4 Download (Thanks To SamMobile!)
Base Firmware: I9100XWLP4 (4.0.3)
Region Luxembourg (LUX)
Carrier: NA (Unbranded)
Build Date: 26th March 2012
Modem: XXLPS
CSC: LUXLP1
Change List: 299729
Kernel Version: 3.0.15
but when I select it in odin and press start it gives me :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP4_I9100XXLPS_I9100LUXLP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
ragingazn628 said:
I'm trying to flash using this:
I9100XWLP4 Download (Thanks To SamMobile!)
Base Firmware: I9100XWLP4 (4.0.3)
Region Luxembourg (LUX)
Carrier: NA (Unbranded)
Build Date: 26th March 2012
Modem: XXLPS
CSC: LUXLP1
Change List: 299729
Kernel Version: 3.0.15
but when I select it in odin and press start it gives me :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP4_I9100XXLPS_I9100LUXLP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Whoops, an errant thanks. Sorry about that. Have you tried re-downloading the package?
ctomgee said:
Whoops, an errant thanks. Sorry about that. Have you tried re-downloading the package?
Click to expand...
Click to collapse
Yes I have still same problem. Do I need drivers or something? I'm downloading Kies right now.
ragingazn628 said:
Yes I have still same problem. Do I need drivers or something? I'm downloading Kies right now.
Click to expand...
Click to collapse
Yes, you need drivers. But a question. In Odin, when you plug the phone in while on download mode, does the COM box light up yellow? If so, then you already had drivers. If not, then yes, install Kies for the drivers. But make sure Kies is not running at the same time Odin is. They don't play well together.
Also, make sure the usb cable is plugged into a main board port, and not a hub or keyboard pass through.
And maybe you don't care, but did you see what I said about getting slow mobile data speeds on T-mobile USA's network with this phone?
Yup installed kies and it worked
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP4_I9100XXLPS_I9100LUXLP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> zImage
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Glad you got it sorted out. But you never acknowledged the data speed on T-mobile USA issue and I've now told you about it 3 times... please don't post back here asking why your data speeds are really slow.
Just for reference. On T-Mobile, I had around 0.01-0.04 Mbps download and 0.01-0.03 Mbps upload compared to 4-6 Mbps download and 0.7-1.2 Mbps upload on AT&T. (Obviously edge speed vs hspa+)
I hope someone can give me advise if I can use ICS ROM that is currently available from other countries. My S2 phone is from middle east.
louisebb said:
I hope someone can give me advise if I can use ICS ROM that is currently available from other countries. My S2 phone is from middle east.
Click to expand...
Click to collapse
Yes
But you may need to change modem if connection problems and you either need a local CSC or enter network settings manually .
jje
JJEgan said:
Yes
But you may need to change modem if connection problems and you either need a local CSC or enter network settings manually .
jje
Click to expand...
Click to collapse
Which ROM is best? Can I flash europe ROM that carrier base?
Sent from my GT-N7000 using xda premium
Dear Friends
I tried to upload new Rom to my Samsung Galaxy S2 but it field and now even I can't get download mode only what I get is picture of (device---Attention---PC),
could you help me to get download mode again?
...
MistahBungle said:
That is download mode. Forced download mode. It's forcing you to flash something to get it going again. Flash a stock rom in Odin.
Click to expand...
Click to collapse
Thanks Man to reply, could you help me to official Rom to download it please?
...
The link below is a thread containing instructions on how to flash a stock firmware and also a list of the stock firmwares that are available.
http://forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9100 using Tapatalk 2
MistahBungle said:
Here or Samfirmware. Or even the PC version of Checkfus. I'd try the first two places initially.
Click to expand...
Click to collapse
Thanks Man,
I will do my best...
...
MistahBungle said:
No probs. Follow the flashing instructions in the thread that Nicholas1520 linked to. Any issues, post here. But have a go at it yourself first. You'll learn plenty going thru this
Click to expand...
Click to collapse
OK thanks boys,
I'm going throw it carefully and I will post anything later
MistahBungle said:
No probs. Follow the flashing instructions in the thread that Nicholas1520 linked to. Any issues, post here. But have a go at it yourself first. You'll learn plenty going thru this
Click to expand...
Click to collapse
Dear Friends,
I downloaded two of these Roms, and I can see the device downloadable in Odin3 and I selected in PDA then I pressed start, the software (Odin3) start to upload till I got Fail...
see this codes:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_ITV_I9100XWLPF_I9100OXILP6_I9100XXLPX.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try using Odin 1.85:
http://db.tt/XSY1G5Ye
You should try another firmware and see of that's the case because your doing everything good so far.
Sent from my GT-I9100 using Tapatalk 2
nicholas1520 said:
Try using Odin 1.85:
http://db.tt/XSY1G5Ye
You should try another firmware and see of that's the case because your doing everything good so far.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Ok I will do my best with it,,, I will inform you later,,,
...
MistahBungle said:
Also, after you open Odin & before you start flashing, make sure you check Windoze Task Manager & close Kies/any associated processes if they're running.
And...Do you definitely have an I9100 or I9100T ? Check the sticker on the phone chassis under the battery to be doubly sure if you need to.
Click to expand...
Click to collapse
Ok, I'm already Using v.1.85 and I tried again by using different USB cable, my Device is I9100G, I did start again and its freezing now see this :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_ITV_I9100XWLPF_I9100OXILP6_I9100XXLPX.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
...
MistahBungle said:
OK. There's your problem right there. You have an I9100G. I think you'll find you tried to flash a rom for the I9100/T which caused it to get into a state where it won't boot/forced download mode.
You need to download & flash an I9100G stock rom. I don't have any experience with the I9100G (apart from seeing posts on here from people who have them), but look in this thread (I don't know which one you should use tho).
Edit - And be careful in future, only flash roms/kernels specifically for the I9100G
Click to expand...
Click to collapse
OK, I will check it carefully.... Thanks for your support...
alisaher2000 said:
OK, I will check it carefully.... Thanks for your support...
Click to expand...
Click to collapse
Dear Friends,
I solved it by applying uploading Rom for I9100G via Odin3 v.1.85... Thanks for all supports....
:good:
...
Hi guys,
On my phone I went to CWM and clicked reboot into recovery. However the phone can't go past the 'Samsung galaxy s3' start up bit. When I do volume down, home and power button it just goes into download mode and stays there. ANything I can do?
Also when I try volume up, home and power, the logo goes away but then just comes back
try pulling the battery for a few minutes, then retry recovery, release the buttons when you see the galaxy s screen
slaphead20 said:
try pulling the battery for a few minutes, then retry recovery, release the buttons when you see the galaxy s screen
Click to expand...
Click to collapse
Hey, just tried that. Still no luck. Is there anything I can do via my laptop to reflash it or something?
Qaz_92 said:
Hey, just tried that. Still no luck. Is there anything I can do via my laptop to reflash it or something?
Click to expand...
Click to collapse
Just flash a stock Rom with Odin, you can get download mode so all is good
slaphead20 said:
Just flash a stock Rom with Odin, you can get download mode so all is good
Click to expand...
Click to collapse
I love you.
Qaz_92 said:
I love you.
Click to expand...
Click to collapse
no need for that lol
Need futher
slaphead20 said:
Just flash a stock Rom with Odin, you can get download mode so all is good
Click to expand...
Click to collapse
Hey I have the same problem as the guy you just help, and I have been trying this for the past 2 hours. I have tried to flash the original samsung rom and flash cwm recovery and both wont go past the gs3 boot screen. Anything I could do? I can get to the recovery and download mode. By the way im on sprint gs3
[KK] Satcom23 said:
no need for that lol
Click to expand...
Click to collapse
sprint?
Then download the one for sprint.
Looks like you're flashing the international i9300 odin packages.
this seems to be a soft brick. Just flash the one with odin from the Sprint Galaxy S3 forums.
masterex567 said:
sprint?
Then download the one for sprint.
Looks like you're flashing the international i9300 odin packages.
this seems to be a soft brick. Just flash the one with odin from the Sprint Galaxy S3 forums.
Click to expand...
Click to collapse
Sir i have the same problem , my SGS3 is soft bricked ,cant go pass the samsung boot logo,tried the volup+home+pwr method to go the recovery but it just reverts back to the boot logo, i havent tried to flash the official stock rom for international version yet,i would like to try the one that you guys have used and worked, can someone pls provide a link so i can flash it via ODIN? thanks and its much appriciated .
im trying to download at this site http://samsung-updates.com/device/?id=GT-I9300 ... but there is a problem with their servers... BTW my region is in the philippines.
U can get stock rom for your phone on the official samsung site .I just had this happen to me. It was stuck on samsung logo and when I would try to get into recovery via 3button method phone would just power off and on and vibrate so after a while by luck looked down at my phone and it was in download mode so just had to use oden and flas a new recovery and a stock jb rom.
Sent from my SAMSUNG-SGH-I747 using xda premium
Help Soft bricked S3
after flashing via odin this came up... failed , i dont know whats PIT mapping is... need Help here ,
<ID:0/025> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ1_I9300OLBDLJ1_I9300DXDLI5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:0/025> File analysis..
<ID:0/025> SetupConnection..
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025>
<ID:0/025> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Mario Christian Oquias said:
after flashing via odin this came up... failed , i dont know whats PIT mapping is... need Help here ,
<ID:0/025> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ1_I9300OLBDLJ1_I9300DXDLI5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:0/025> File analysis..
<ID:0/025> SetupConnection..
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025>
<ID:0/025> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I think it's part of the uh sudden death thing with the pit dissapearing.
Try this at your own risk, but flashing the correct PIT? or it might be time for service center
xSpeced said:
I think it's part of the uh sudden death thing with the pit dissapearing.
Try this at your own risk, but flashing the correct PIT? or it might be time for service center
Click to expand...
Click to collapse
its that serious huh? ouch... that will leave a mark.. tsk tsk tsk....how would i know if its the correct PIT mapping and procedure to do that? ..is there even a procedure or should i just give this to the service center, if there is a procedure i know i can do it properly, can someone point me the way? thanks for the heads up BTW
hel needed
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:0/025> File analysis..
<ID:0/025> SetupConnection..
<ID:0/025> Can't open the serial(COM) port.
<ID:0/025> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
i tried to flash the PIT and this came up, hmn..i dont know what this means..
Dear Friends
I HAVE MESS-UP WITH MY i9300!!!!
The incident is I was using custom rom, and installed some stupid app called "Adblock" or something,
and then, my phone just keep went-off for about 8-10 times a day. So then, I decided to reflash
custom rom by CWM, and after I pressed install in Aroma Installer, it just kick me out all of sudden, and
then, I couldn't get back to CWM anymore, so I decided to flash some stock rom by odin, but what
had happen was it starts until "Nand write start" and stacked for a while, and then just FAIL me.
On the net, I found that Checkrom Resurrection V4 could rescue softbrick i9300, I tried, but
no luck either. Finally, just now, I tried a 3 files stock rom with pit, and it came out as:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noshi p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
What I have done:
1. reflash custom rom by CWM
2. 3 wipes - (but I am no longer to get back to CWM)
3. flash stock rom - hong kong combo firmware @ Samfirmware - by Odin
4. flash Checkrom Resurrection V4 by Odin
5. flash stock rom - 3 files firmware + pit - by Odin
6. changed usb port
7. changed PC
8. uninstall all applications relative to Kies
have you guys got any idea what can I do? I am thinking to mess-up the phone even badly (till it couldn't switch on), so that I can take it to Samsung Service Center for warranty replacement, but have you got ANY method I can do that to mess it up? Or anything I can over-come from the soft (or hard) brick. PLEASE Give me some help guys. I am very struggle.
Wrong thread.. Needs to be in Q&A
Try a fully stock rom with Odin 1.85
Sent from my GT-I9300 using xda app-developers app
Kingybear said:
Try a fully stock rom with Odin 1.85
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks Mate, but no luck
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NatTheCat said:
Wrong thread.. Needs to be in Q&A[/QUOT
I put it on Q&A already, but just wanted to have more people can help, so I put it on here. sorry for any disturb.
Click to expand...
Click to collapse
The fact that you want more people helping you doesnt mean that you can do what you want, wrong section.
By the way, it seems that your s3 is bricked pal.
Sent from my GT-I9300 using Tapatalk
anyone can tell me how to delete the thread? Thanks
aguerito said:
The fact that you want more people helping you doesnt mean that you can do what you want, wrong section.
By the way, it seems that your s3 is bricked pal.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
show the poor guy some love dude, your comments are abrasive he only wants help for his expensive phone sheesh
---------- Post added at 10:03 AM ---------- Previous post was at 09:59 AM ----------
I wouldnt panic yet they say its very hard to brick an S3?
check around and see what you can find out
kk12175 said:
Thanks Mate, but no luck
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
jothi2lingam said:
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
i was using Omega since v.9 until v33.2 at the last minute. and I found a video in youtube to resurrect my s3 by flashing Checkrom v4:
http://www.youtube.com/watch?v=ZNaQfdOi56E
tried it as well, but it seems doesn't work as it kept rebooting / hanging at the Galaxy S3 logo. And I tried to flashed some stock rom (combo file) from Samfirmware, no luck neither. Tried to flash some stock rom (3 files + pit) HK base rom. Same happened. Fail after Nand Write Start.:silly:
and now, couldn't get into CWM neither.
jothi2lingam said:
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Been using adblock for a while myself and never had a hiccup .. excellent app..
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
johnkhor123 said:
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I had flashed custom rom before, do you think I can still use the warranty? If yes, definitely going.
kk12175 said:
Dear Friends
I HAVE MESS-UP WITH MY i9300!!!!
The incident is I was using custom rom, and installed some stupid app called "Adblock" or something,
and then, my phone just keep went-off for about 8-10 times a day. So then, I decided to reflash
custom rom by CWM, and after I pressed install in Aroma Installer, it just kick me out all of sudden, and
then, I couldn't get back to CWM anymore, so I decided to flash some stock rom by odin, but what
had happen was it starts until "Nand write start" and stacked for a while, and then just FAIL me.
On the net, I found that Checkrom Resurrection V4 could rescue softbrick i9300, I tried, but
no luck either. Finally, just now, I tried a 3 files stock rom with pit, and it came out as:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noshi p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
What I have done:
1. reflash custom rom by CWM
2. 3 wipes - (but I am no longer to get back to CWM)
3. flash stock rom - hong kong combo firmware @ Samfirmware - by Odin
4. flash Checkrom Resurrection V4 by Odin
5. flash stock rom - 3 files firmware + pit - by Odin
6. changed usb port
7. changed PC
8. uninstall all applications relative to Kies
have you guys got any idea what can I do? I am thinking to mess-up the phone even badly (till it couldn't switch on), so that I can take it to Samsung Service Center for warranty replacement, but have you got ANY method I can do that to mess it up? Or anything I can over-come from the soft (or hard) brick. PLEASE Give me some help guys. I am very struggle.
Click to expand...
Click to collapse
Try TURN OFF antivirus, update Kies, Try on other OS.
Because I had the same problem with own S3.
Windows 8, AVG IS 2013, Odin 3.07,3.04.
Everytime after few second Odin stop working and show FAIL "Complete(Write) operation failed."
But on Windows 7, updated Kies to 2.5, turned off AVG, Odin 3.07, fresh downloaded rom ELK4, Galaxy S3 slowly but finished NAND write
and now I am happy againg
johnkhor123 said:
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Ya i think so,,Same incident for previously after flashed one of the rom from this thread i went to sleep..The phone was reboot itself (stuck in bootloop) till i found at morning, my phone fuc**ing hot stucked in Samsung Galaxy SIII. After tried flashed using odin & using cwm not worked because my phone keep on rebooting. Once send to sammy centre i said that i put in charge, once wakeup in morning my phone keep on rebooting & so hot. So after one week they replace me new board for my s3 even they can see my cwm. I tried to delete cwm but cant. Thank god atlast they replace my s3. so only way is send to samsung centre. I face exactly same issue previously as you facing now
KKTHX said:
Try TURN OFF antivirus, update Kies, Try on other OS.
Because I had the same problem with own S3.
Windows 8, AVG IS 2013, Odin 3.07,3.04.
Everytime after few second Odin stop working and show FAIL "Complete(Write) operation failed."
But on Windows 7, updated Kies to 2.5, turned off AVG, Odin 3.07, fresh downloaded rom ELK4, Galaxy S3 slowly but finished NAND write
and now I am happy againg
Click to expand...
Click to collapse
sounds good. give it a try .. thanks MATE
kk12175 said:
anyone can tell me how to delete the thread? Thanks
Click to expand...
Click to collapse
Thread closed.