I know this F400 error has been brought up by a few other people on the DFT HSPL topic, but I can't seem to solve it. My screen says spl 2.5xxxx but no Cotulla or HSPL. I am using the goldcard method with a 2GB Sandisk Cruzer. I have the F400 error and the phone does recognize a serial or usb connection. When I run goldcard with the Eterimg.nbh from about every rom including the stock Cingular 1.10 rom it just says "Loading" for about 10 min. then returns to the spl screen. The phone boots up fine and works fine, but I can't get HSPL installed and I can't drop back to the 1.10 spl. I'm not even sure why I need a custom rom, but it will bug me until I figure it out or I die!! Any help would be appreciated. Thanks
adamcwingert said:
I know this F400 error has been brought up by a few other people on the DFT HSPL topic, but I can't seem to solve it. My screen says spl 2.5xxxx but no Cotulla or HSPL. I am using the goldcard method with a 2GB Sandisk Cruzer. I have the F400 error and the phone does recognize a serial or usb connection. When I run goldcard with the Eterimg.nbh from about every rom including the stock Cingular 1.10 rom it just says "Loading" for about 10 min. then returns to the spl screen. The phone boots up fine and works fine, but I can't get HSPL installed and I can't drop back to the 1.10 spl. I'm not even sure why I need a custom rom, but it will bug me until I figure it out or I die!! Any help would be appreciated. Thanks
Click to expand...
Click to collapse
Use mini partition tool to re partition your sd card to 900mb and try a 2.5 stock EU rom...
I tried minipartition with no luck. Thanks for the quick response.
adamcwingert said:
I know this F400 error has been brought up by a few other people on the DFT HSPL topic, but I can't seem to solve it. My screen says spl 2.5xxxx but no Cotulla or HSPL. I am using the goldcard method with a 2GB Sandisk Cruzer. I have the F400 error and the phone does recognize a serial or usb connection. When I run goldcard with the Eterimg.nbh from about every rom including the stock Cingular 1.10 rom it just says "Loading" for about 10 min. then returns to the spl screen. The phone boots up fine and works fine, but I can't get HSPL installed and I can't drop back to the 1.10 spl. I'm not even sure why I need a custom rom, but it will bug me until I figure it out or I die!! Any help would be appreciated. Thanks
Click to expand...
Click to collapse
I had to Flash the AT&T Official Rom Gold card or RRU does not matter got rid of the F400 but not the SPL I am still at 2.5 and it will not let me flash HSPL even thou it goes threw the steps and says it done I tried everything over and over and every way I can nothing I am using windows 8 maybe that's it ?
The only way to get rid of F400 is to flash stock rom by goldcard method. In your case you need a stock cingular rom 1.10 and make sure that you rename it to ETERIMG.nbh you might need to try it for few times... I assumed that your Y cable is working as you were able to flash dft spl 2.5.
Sent from my TITAN X310e using XDA Windows Phone 7 App
It shouldn't say "loading" for 10 minutes, and in my experience f400 is caused by an incompatible USB/microSD card.
Try flashing the stock ROM through goldcard with a sandisk cruiser flash drive, or try every flash drive you have access to until goldcard works correctly.
In my case, I got F400 after trying to flash what i believe is corrupt nbh file which sits on loading page for a while before i forced restart then it boots with f400. With the same micro sd card that i got f400, i flashed stock cingular rom and got rid with f400. BTW I use 2g kingston microsd card.
Sent from my TITAN X310e using XDA Windows Phone 7 App
Related
I have been searching and googling for over 2 hours straight and cant find any solution to my problem:
I was going to install the Custom HD2 Android. But my radio was to old. so I decided to update it with the newest rom.
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
So now I cant get passed a screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again
USB
I'm starting to believe there is nothing I can do.. Cant access my sd card when plugged to the pc or nothing..
Is there ANYTHING someone can help me with?
I believe your problem lies with SPL 3.03. I don't think even the latest HSPL will work. I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
juggs said:
I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
Click to expand...
Click to collapse
won't work on none tmous phone because spl 3 won't let itself downgrade to spl1. just like spl2 wouldn't downgrade to 1.
the tmous users CAN downgrade from 3 to 2, but there are no spl2 roms for none tmous users.
@OP
if you have a tmous phone then flash a stock tmous rom from sd card.
if you have a normal hd2 then you are stuck on spl3 until hspl gets updated.
EDIT - my answer was incorrect, I was being wary until someone confirmed the spl CAN be downgraded by flashing a correct stock rom for your phone (USB is fine), or by using a goldcard.
Leffernan said:
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
Click to expand...
Click to collapse
you flashed the 3.x rom from sd card. the first thing an sd card flash does is remove hspl, and replace it with stock spl. next, the rom checks that the phone matches the rom, which in your case it doesn't, so it stops and fails.
you could try forcing an spl 2.08.0000 tmous rom on it using goldcard, in the hope it will then allow you to run hspl2.
But all of this requires me to have access to my sd card? I don't have that :\
ah ok.then its time to wait for the next hspl version to support spl3.x
Would it be too much to ask if you could send me a pm or a mail at [email protected] whenever that happens? Probably going back to a good old Sony Ericsson in the meantime, hehe
i'd like to say yes, but it could be several weeks, and i can barely remember to feed myself from one day to the next, so..... heh.
however When it does come out, it will be hard not to notice, just skim the latest thread titles every day or two.
edit - oh, and don't give up just yet, I could be mistaken, its not unusual!. i haven't touched the 3.x rom/spl yet, so i could be wrong.
this thread, for instance,
http://forum.xda-developers.com/showthread.php?t=814838
suggests that the spl CAN be downgraded. reports are still confused.
you could for instance try flashing the 3.x rom over usb using SSPL, and then you'd at least have a working phone.
EDIT - MY RESPONSES IN THIS THREAD WERE NOT BASED ON ALL THE INFORMATION WE NOW HAVE REGARDING SPL 3.03
THE 3.03 SPL CAN BE DOWNGRADED EASILY BY USING THE CORRECT STOCK ROM FOR YOUR PHONE, FLASHED EITHER USB OR SD CARD.
My HD2 has got a custom rom on it
i removed HSPL (You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL3 application (You need select 2.08.0000 in the choose screen)
now im running the update and it is just sitting at 0%....have i done something wrong?
i am getting communication error 262
trying via SD now and it is sitting on Loading...
unless you have a tmobile hd2, you need a lower spl..please post your oriinal spl version/ last stock rom
pakure said:
unless you have a tmobile hd2, you need a lower spl..please post your oriinal spl version/ last stock rom
Click to expand...
Click to collapse
thanks for responding....i took a guess and put hard spl? back on and now im flashing via SD card and it seems to be working
Hi guys,
At the moment i have SSPL.
I want to install HSPL3 - 2.08
but i cant unstall the sspl.
when i try to install hspl, i get error, BAD SPL VERSION
to install my sspl i used the folowing steps :
1. Remove SD (and remove Application Data and Program Files folders from it using SD card reader)
2. Remove HSPL with HSPL2_RUN.exe (flash SPL 1.66.0000 with HSPL2_RUN.exe)
3. PowerOff the phone
4. Boot to bootloader (VolDown+PowerOn) and when it shows "USB" flash stock ROM by running matching RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.15 .50.14_LEO_S_Ship.exe (get yours HERE or for Orange UK/FR HERE)
5. Hard Reset (when phone starts booting after step 4, remove the battery, insert it back press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
6. Boot to homescreen.
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
8. Hard reset (instructions in step 5)
9. when on homescreen - softreset.
10. Insert SD
Any help?
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
samsamuel said:
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
Click to expand...
Click to collapse
how can i downgrade?
its not working
as i said, get your stock rom, any version, but it must be correct for your phone, and flash it usb is fine. that's it.
AAh ok thanks it worked
I flashed original 1.66 ROM
No w i was able to install HSPL
Thanks!!!
no worries.
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
i had similar issues, i used task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work or install Android then. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
Is your phone branded (T-Mobile, Vodafone, O2, Orange, etc) and to what country?
If you are using a T-Mobile USA HD2, then you may try and flash the 2.08 TMOUS ROM.
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
lhayati said:
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
Click to expand...
Click to collapse
If you can find the previous stock ROM than yes. But it's a hard one to find (Orange UK)
Problem with spl3.03
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOW"
My S/N is HT04YNW00034
Please help me.
dalisman said:
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOWED"
My S/N is HT04YNW00034
Please help me.
Click to expand...
Click to collapse
Mate, do you want to upgrade or downgrade? You're statement is confusing
what do you mean "locked"?
As long as you flash the CORRECT STOCK ROM, you can upgrade or downgrade.
What you have to do first is find the CORRECT STOCK ROM".
you can't try all countries version, it is dangerous.
Go to htc website and select the country where your hd2 come from, and download the stock rom using your SN.
If you can't find the CORRECT STOCK ROM, the only alternative is using gold card method.
Good luck
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
dalisman said:
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
Click to expand...
Click to collapse
I think you haven't found th CORRECT STOCK ROM, that is why "not allow"
Gold card is a method to enable you to flash stock rom from other country (it is useful in a situation where you can't find the CORRECT STOCK ROM.
There is a thread for gold card, just using search button to find it out
Good luck
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
dalisman said:
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
Click to expand...
Click to collapse
Is it branded phone (telstra, Tmobile, orange, etc)? if yes, you should go to their website instead of htc website.
However, if you still fails, then the only alternative is using gold card method.
I never experience for this though I read it many times, so I would suggest you to search the forum. There is a thread title [GOLD CARD], just use search button.
Good luck
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
dalisman said:
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
Click to expand...
Click to collapse
I would suggest you to post this at the gold card thread, mate
Maybe there's someone can answer that.
Good luck
Hi all, I've been running HSPL and Stock ROM 3.14.405.2 on my UK T-Mobile HD2. I needed HSPL as its a generic ROM.
I decided to try a cooked ROM (Artemis), which required the removal of HSPL. I extracted "RUU_signed.nbh" from the 3.14 ROM, renamed it to "leoimg.nbh" and stuck it on my SD Card, before resetting and pressing the down volume. It rebooted, asked if i wanted to continue with the installation, and then reset halfway through.
I'm now getting "Upgrade ROM code error. Please Try Again" and sometimes a grey screen with red numbers "00028002" at the top.
I've tried installing a standard 3.14 ROM again, and a 1.66 ROM, but both say they are unable to communicate to the phone.
Any ideas would be greatly appreciated please - I'm gonna have to crack out my Nokia N70 back up soon!!
What haoppened is that when you ran the 3.14 update from sd card, because HSPl was installed it allowed it to start flashing even though its not for your phone. (As hspl should indeed do).
Problem is that step 1 of the update process is to replace the spl(hspl) and instal spl 3.03.0000. The phone then reboots into the new 3.03.0000 bootloader and flashing continues. Except it doesn't, because hspl is no longer there, so your phone rejects the 3.14 rom and you get rom update error and are left with spl 3.03.0000 and no way to apply a 3.14 rom.
Had you tried to flash that rom without hspl, it would have simply failed and done nothing.
The 1.66 rom didnt work because it is an unbranded rom, and you have a branded phone.
You need a t mo uk rom, and you dont need to use sd card, you can flash over usb from bootloader and it will downgrade spl from 3.03.0000 and hspl2 will again work.
Only way, the ONLY way, you can get a 3.14 rom onto your branded hd2 is goldcard. running it as you did with hspl causes instability and only 200 and odd meg ram, with only 50 meg free.
if you would read the install instructions on the first post of the Artemis ROM;
1) you didn't need this thread.
2) you saw the step by step guide on how to do it (available in 3 language!!)
samsamuel said:
What haoppened is that when you ran the 3.14 update from sd card, because HSPl was installed it allowed it to start flashing even though its not for your phone. (As hspl should indeed do).
Problem is that step 1 of the update process is to replace the spl(hspl) and instal spl 3.03.0000. The phone then reboots into the new 3.03.0000 bootloader and flashing continues. Except it doesn't, because hspl is no longer there, so your phone rejects the 3.14 rom and you get rom update error and are left with spl 3.03.0000 and no way to apply a 3.14 rom.
Had you tried to flash that rom without hspl, it would have simply failed and done nothing.
The 1.66 rom didnt work because it is an unbranded rom, and you have a branded phone.
You need a t mo uk rom, and you dont need to use sd card, you can flash over usb from bootloader and it will downgrade spl from 3.03.0000 and hspl2 will again work.
Only way, the ONLY way, you can get a 3.14 rom onto your branded hd2 is goldcard. running it as you did with hspl causes instability and only 200 and odd meg ram, with only 50 meg free.
Click to expand...
Click to collapse
Thanks for the response - I thought something along those lines had happened, so I've gotten TMobile 1.72 from the HTC site.
Ive extraced RUU_signed and renamed it to leoimg, and stuck it on the SD Card. My problem is now, when i boot with the volume held down, It just says "Upgrade ROM code error. Please Try Again" still. It doesnt seem to boot from the SD. Am i missing something or is it totally ballsed?
EDIT: After formatting a different card and trying again, it's working. Wiping now....
As for this goldcard stuff, i assume there's plenty of threads to do that?
samsamuel said:
......Only way, the ONLY way, you can get a 3.14 rom onto your branded hd2 is goldcard. running it as you did with hspl causes instability and only 200 and odd meg ram, with only 50 meg free.
Click to expand...
Click to collapse
Ahhhhhh, that'd explain why performance with 3.14 has been totally rubbish. I had no idea hspl had an overhead like that. Goldcard it is then......if i ever get it working
its not hspl with the overhead, its an incompatibility between the rom and the spl. If you put 3.14 rom on there and then remove hspl leaving say 1.66.0000, you still get the same issues.
As for goldcard, theres a goldcard request thread in rom dev section, post a cid there and ill make a batch of images up later this evening.
samsamuel said:
its not hspl with the overhead, its an incompatibility between the rom and the spl. If you put 3.14 rom on there and then remove hspl leaving say 1.66.0000, you still get the same issues.
As for goldcard, theres a goldcard request thread in rom dev section, post a cid there and ill make a batch of images up later this evening.
Click to expand...
Click to collapse
I see, got it now. I've posted on there earlier, so i look forward to your help. Thanks a lot
kurt-willems said:
if you would read the install instructions on the first post of the Artemis ROM;
1) you didn't need this thread.
2) you saw the step by step guide on how to do it (available in 3 language!!)
Click to expand...
Click to collapse
All valid points, but not very helpful seeing as this is a thread requesting.....help.
Well as tittle says, i have famous at&t tiatan with 2.05 spl and error F400, was showing USB and SERIAL, now since i tried usb stick and sd card with reader on HTC HD7 confirmed to work, i start proces with titan and i get kicked to BL screen, now what is unexpected is that i, for fun only, flashed this IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE.nbh via ROMupdateutillitytool and it flashed But what is main thing is spl didnt changed, nor radio, just FW it is now at&t US rom, I had EU .401 region ROM before, my humble question is should is use hammer on my titan or what? Is there a way to go back to .401 region ROM
thx in advance
EDIT: Well this is even more strange, via goldcard i now flashed same Cingular ROM, but why when i try to flash any other ROM via gold card i get knocked out of USB host mode into bootloader mode?
nikola92 said:
Well as tittle says, i have famous at&t tiatan with 2.05 spl and error F400, was showing USB and SERIAL, now since i tried usb stick and sd card with reader on HTC HD7 confirmed to work, i start proces with titan and i get kicked to BL screen, now what is unexpected is that i, for fun only, flashed this IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE.nbh via ROMupdateutillitytool and it flashed But what is main thing is spl didnt changed, nor radio, just FW it is now at&t US rom, I had EU .401 region ROM before, my humble question is should is use hammer on my titan or what? Is there a way to go back to .401 region ROM
thx in advance
EDIT: Well this is even more strange, via goldcard i now flashed same Cingular ROM, but why when i try to flash any other ROM via gold card i get knocked out of USB host mode into bootloader mode?
Click to expand...
Click to collapse
Why did you flash to the Cingular Rom? From what I understand...you can get rid of the f400 error if you flash via goldcard the stock rom that you had before. Did you try this yet? and did you try flashing to your EU stock rom via the RUU too?
I read over on the DFT thread and noticed you were trying to install DFT's HSPL a couple of days ago. Do you know what SPL version you had before you tried to HSPL?
xconomicron said:
Why did you flash to the Cingular Rom? From what I understand...you can get rid of the f400 error if you flash via goldcard the stock rom that you had before. Did you try this yet? and did you try flashing to your EU stock rom via the RUU too?
I read over on the DFT thread and noticed you were trying to install DFT's HSPL a couple of days ago. Do you know what SPL version you had before you tried to HSPL?
Click to expand...
Click to collapse
Why i tried well because not a single one other Stock ROM was flashable via RUU or Goldcard, even stock Cingular ROM wasnt flashable via RUU i only mmanaged to flash it via goldcard. Well I was trying too to get rid of F400 but the thing is my titan is AT&T he was branded, before i bought it someone placed 2.05 spl on it and unlocked it, to meake it simple i got my titan with 2.05 spl, F400 and was x310e in about, every my atempt to flash something via goldcard was failure because it connects with usb stick in USB host mode , it says "Loading..." and then kicks me out to BL screen, exept the 1.10 cingular ROM, hehe but what is funny i get rid of F400 that way but my SPL stayed on 2.05..... :silly: iwill try the famous Tango ROM 4.16 spl i dont care anymore i am pissed or i will do that or use a hammer on this american junk... I had a lot of phones and not a single one was anoying as this one.....