Hi guys,
At the moment i have SSPL.
I want to install HSPL3 - 2.08
but i cant unstall the sspl.
when i try to install hspl, i get error, BAD SPL VERSION
to install my sspl i used the folowing steps :
1. Remove SD (and remove Application Data and Program Files folders from it using SD card reader)
2. Remove HSPL with HSPL2_RUN.exe (flash SPL 1.66.0000 with HSPL2_RUN.exe)
3. PowerOff the phone
4. Boot to bootloader (VolDown+PowerOn) and when it shows "USB" flash stock ROM by running matching RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.15 .50.14_LEO_S_Ship.exe (get yours HERE or for Orange UK/FR HERE)
5. Hard Reset (when phone starts booting after step 4, remove the battery, insert it back press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
6. Boot to homescreen.
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
8. Hard reset (instructions in step 5)
9. when on homescreen - softreset.
10. Insert SD
Any help?
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
samsamuel said:
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
Click to expand...
Click to collapse
how can i downgrade?
its not working
as i said, get your stock rom, any version, but it must be correct for your phone, and flash it usb is fine. that's it.
AAh ok thanks it worked
I flashed original 1.66 ROM
No w i was able to install HSPL
Thanks!!!
no worries.
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
i had similar issues, i used task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work or install Android then. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
Is your phone branded (T-Mobile, Vodafone, O2, Orange, etc) and to what country?
If you are using a T-Mobile USA HD2, then you may try and flash the 2.08 TMOUS ROM.
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
lhayati said:
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
Click to expand...
Click to collapse
If you can find the previous stock ROM than yes. But it's a hard one to find (Orange UK)
Problem with spl3.03
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOW"
My S/N is HT04YNW00034
Please help me.
dalisman said:
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOWED"
My S/N is HT04YNW00034
Please help me.
Click to expand...
Click to collapse
Mate, do you want to upgrade or downgrade? You're statement is confusing
what do you mean "locked"?
As long as you flash the CORRECT STOCK ROM, you can upgrade or downgrade.
What you have to do first is find the CORRECT STOCK ROM".
you can't try all countries version, it is dangerous.
Go to htc website and select the country where your hd2 come from, and download the stock rom using your SN.
If you can't find the CORRECT STOCK ROM, the only alternative is using gold card method.
Good luck
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
dalisman said:
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
Click to expand...
Click to collapse
I think you haven't found th CORRECT STOCK ROM, that is why "not allow"
Gold card is a method to enable you to flash stock rom from other country (it is useful in a situation where you can't find the CORRECT STOCK ROM.
There is a thread for gold card, just using search button to find it out
Good luck
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
dalisman said:
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
Click to expand...
Click to collapse
Is it branded phone (telstra, Tmobile, orange, etc)? if yes, you should go to their website instead of htc website.
However, if you still fails, then the only alternative is using gold card method.
I never experience for this though I read it many times, so I would suggest you to search the forum. There is a thread title [GOLD CARD], just use search button.
Good luck
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
dalisman said:
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
Click to expand...
Click to collapse
I would suggest you to post this at the gold card thread, mate
Maybe there's someone can answer that.
Good luck
Related
Like the title says, im just stuck at bootloader and instead of booting to the white screen it just stays on bootloader and says "SERIAL".
Ive googled, youtubed, and searched here, and many have the same problem, but i have yet to seen a solution to this.
I have tried android and many custom roms, and now im back on original ROM and everything works great. BUT i have HSPL in my phone and i dont want it for now.
It is a very easy procedure in the guides and should not be a problem, but please how can i get my LEOIMG.nbh to boot from my memorycard?
It is formated FAT32, and i have tried redownload the stock rom and unpacked it with winrar several times, but the result is always the same.
Is there some way to go around this? I Just wanna boot from the memorycard and restore my phone.
FYI, the restore is just for warranty issues.. I just want to be able to go back just to be on the safe side..
Then after that i can try the cooked roms all days
Thanks!
What size is the microSD card? As there has been reports of problems flashing from 16GB cards.
While in bootloader mode, you can plug in the microUSB and the 'Serial' should be replaced by 'USB'. This means that you can run the flashing from the computer (just ignore the requirement for ActiveSync).
Thanks for the quick reply!
I have a 8 GB memorycard.
Just before i read your post i inserted the usbcable and the screen on my htc says "USB".
But how do i uninstall HSPL from my PC in usbmode? Use customRUU and place LEOIMG.nbh in that folder?
If you install either the HTC Stock or your mobile provider's ROM (what ever you need for warranty requirements), they will flash your phone with SPL, ROM and RADIO.
These ROMs are avaiable from your mobile provider's website or via a link in the ROM Section.
Sounds great!
So i just run the original .exe file from my PC when my HTC HD2 is in bootloader screen in USB-mode, correct?
I have alreade flashed with original rom from PC when my phone was online. But then the HSPL did not go away even though my original rom was installed.
I could use alittle help too
when i try to update it stops at 4% tried to flash other energy roms with the same issue. don't know what todo to get past 4%
fred_up said:
If you install either the HTC Stock or your mobile provider's ROM (what ever you need for warranty requirements), they will flash your phone with SPL, ROM and RADIO.
These ROMs are avaiable from your mobile provider's website or via a link in the ROM Section.
Click to expand...
Click to collapse
won't flash the spl over usb whilst hspl is installed.
H4z3 said:
Sounds great!
So i just run the original .exe file from my PC when my HTC HD2 is in bootloader screen in USB-mode, correct?
I have alreade flashed with original rom from PC when my phone was online. But then the HSPL did not go away even though my original rom was installed.
Click to expand...
Click to collapse
use the hspl.exe program to remove hspl just like you used it to apply it. just choose a stock spl instead of the hspl.
example, regular hd2, wants to go back to o2 stock everything.
run hspl2, choose 1.66.0000
run the o2 1.72.exe rom over usb.
all done.
if the rom doesn't flash its not the correct stock rom.
samsamuel said:
use the hspl.exe program to remove hspl just like you used it to apply it. just choose a stock spl instead of the hspl.
example, regular hd2, wants to go back to o2 stock everything.
run hspl2, choose 1.66.0000
run the o2 1.72.exe rom over usb.
all done.
if the rom doesn't flash its not the correct stock rom.
Click to expand...
Click to collapse
At first i used HSPL 3 to install 2.08.0000 HSPL.
But if i run that file again i only have the choice 2.08.0000.
I downloaded a previous version of HSPL, and there i could choose SPL 1.42.0000 wich was my original SPL version before the flash.
Is this a correct way to do this?
I am asking again because even though i now am at the original ROM and Original SPL version the Radio and Protokoll-version differs from the versions when i bought the telephone.
radio and protocol doesn't matter. yes you've done it right. so long as its a stock rom and the spl ends 0000 then it's fine.
Ok thanks!
Then everything is ok now and i am very happy for that, so thanks for all answers!
I can also add that i took my original SD-card (2GB) and put the LEOIMG.nbh on it.
The bootsequence then started ok when holding down volumebutton and power on.
But the result was exactly the same as it was when flashing to stock SPL with HSPL2 utility.
So the booting-problem was memorycard related.. So it seems that even some 8 gb memorymodules have problems.
Just thought you should know.
Howdy all,
Had ANdroid on the HD2 and wanting to revert back to the original ROM.
Have downloaded a stock rom (3.14 WWE) and have used task 29 to clean up the phone.
Trying to install the rom gives an error: 209: Invalid Vendor ID.
THe phone shows it get to 1% and then reset itself.
I have tried 1.32 Radio, 1.66 and 2.08, all giving the same result (Except for 2.08 wouldnt even get to 1%)
Completely stuck here...
Any help would be great.
Also, read about flashing from SD, but because i've used task 29 the phone has no ROM to boot to. Plus I couldnt figure out how to extract the RUU_signed.nbh from the original .exe
Maybe i've done something wrong?
Any help would be great.
Cheers
Oky, lets start with the beginning.
Error: 209: (Invalid Vendor ID) means that the stock ROM you are try to install isn't the right one. Probably you have a branded device; ore you need to install a otter aria Rom.
Secondly Stock ROM 3.14 isn't compatible with HSPL; so you need to remove it (use HSPL2_RUN.exe to remove HSPL and select SPL 1.66 instead.)
PS, you don't need to install separately a Radio version. Ons you have install Stock Rom 3.14 you will have automatic Radio 2.15.50.14
The important thing is to install a correct stock ROM who match with your device. (witch was your official ROM version?)
kurt-willems said:
Oky, lets start with the beginning.
Error: 209: (Invalid Vendor ID) means that the stock ROM you are try to install isn't the right one. Probably you have a branded device; ore you need to install a otter aria Rom.
Secondly Stock ROM 3.14 isn't compatible with HSPL; so you need to remove it (use HSPL2_RUN.exe to remove HSPL and select SPL 1.66 instead.)
PS, you don't need to install separately a Radio version. Ons you have install Stock Rom 3.14 you will have automatic Radio 2.15.50.14
The important thing is to install a correct stock ROM who match with your device. (witch was your official ROM version?)
Click to expand...
Click to collapse
Sorry i meant SPL.....
Bought the phone from Mobicity and it was imported from Thailand originally....I have previously installed this exact same ROM i am trying to install now....
but after putting Andriod on the device...trying to revert it back is proving impossible.....
I am giving the phone to a friend and thats why i want a stock ROM back on it.....
ftosam said:
Sorry i meant SPL.....
Bought the phone from Mobicity and it was imported from Thailand originally....I have previously installed this exact same ROM i am trying to install now....
but after putting Andriod on the device...trying to revert it back is proving impossible.....
I am giving the phone to a friend and thats why i want a stock ROM back on it.....
Click to expand...
Click to collapse
Stock ROM 3.14 WWE (3.14.413.2) can't be install on a Thailand Rom version !?
Secondly Task 29 isn't compatible with SPL 3.03 neater.
Thirdly I don't see way you need to revers back to a stock ROM (because you mention that Android was the reason (Android isn't install on your device, but on SD. So it don't change your internal ROM))
Okay; what you can try to do is flashing over SD.
but you need to use a original stock ROM and not the WWE (3.14.413.2) you need the version of Thailand (if this was your original!?) (Asia_WWE_3.14.707.3)
- Download your original stock ROM
- Use WinZip to extract it; and extract the RUU_signed.nbh file
- Rename the .nbh file to "leoimg.nbh" place it on a SD (take a 2GB SD) who was been format (FAT32)
- Shut Down your device, enter your SD, hold volume down button, and shortly press on the power button.
- follow the instructions on your screen.
But like mention early'r you need to use the right stock ROM version!
kurt-willems said:
Stock ROM 3.14 WWE (3.14.413.2) can't be install on a Thailand Rom version !?
Secondly Task 29 isn't compatible with SPL 3.03 neater.
Thirdly I don't see way you need to revers back to a stock ROM (because you mention that Android was the reason (Android isn't install on your device, but on SD. So it don't change your internal ROM))
Okay; what you can try to do is flashing over SD.
but you need to use a original stock ROM and not the WWE (3.14.413.2) you need the version of Thailand (if this was your original!?) (Asia_WWE_3.14.707.3)
- Download your original stock ROM
- Use WinZip to extract it; and extract the RUU_signed.nbh file
- Rename the .nbh file to "leoimg.nbh" place it on a SD (take a 2GB SD) who was been format (FAT32)
- Shut Down your device, enter your SD, hold volume down button, and shortly press on the power button.
- follow the instructions on your screen.
But like mention early'r you need to use the right stock ROM version!
Click to expand...
Click to collapse
Thanks! that worked, but now it is stuck in Taiwanese ? is there a way to change it to english, as when i purchased the phone it was all in english?
ftosam said:
Thanks! that worked, but now it is stuck in Taiwanese ? is there a way to change it to english, as when i purchased the phone it was all in english?
Click to expand...
Click to collapse
Based on the fact that stock ROM 3.14 use SPL 3.03 who isn't compatible with HSPL you can't change your stock ROM version by using HSPL.
But if you used the GoldCard technique you can install a otter stock ROM version.
kurt-willems said:
Based on the fact that stock ROM 3.14 use SPL 3.03 who isn't compatible with HSPL you can't change your stock ROM version by using HSPL.
But if you used the GoldCard technique you can install a otter stock ROM version.
Click to expand...
Click to collapse
HSPL is not on my phone, only SPL 1.66 ...... I had to flash using USB as SD card way would not work .....
There must be a way of doing this only because when i received my phone it was in english so i really dont understand,,,,i just want a stock ROM in english.....
ftosam said:
HSPL is not on my phone, only SPL 1.66 ...... I had to flash using USB as SD card way would not work .....
There must be a way of doing this only because when i received my phone it was in english so i really dont understand,,,,i just want a stock ROM in english.....
Click to expand...
Click to collapse
Sorry sir, I can't follow you
You mentioned to have install Stock rom 3.14 correctly; but now you mention to have "SPL 1.66"
If you have install stock ROM 3.14 correctly like mention before you will have SPL 3.03!
And like I mention before if you will install latest stock ROM 3.14 WWE (3.14.413.2) on your Taiwanese device (x.XX.707.x) you need to use the GoldCard technique!
We dont have spl 3 could that be why the other ROMs woulnt work?
How do i get Spl 3?
ftosam said:
We dont have spl 3 could that be why the other ROMs woulnt work?
How do i get Spl 3?
Click to expand...
Click to collapse
When you install stock ROM 3.14 correctly it will upgrade automatically your SPL version to 3.03!
But it seems fore one ore a other reason it didn't do it correctly.
Connect your device by active sync, and run "RUU_Leo_S_hTC_Asia_WWE_3.14.707.3" as administrator, to install it again.
I don't know from where you get the original stock ROM; but to be sure download it again: RUU_Leo_S_hTC_Asia_WWE_3.14.707.3
I have no idea why it is still not working getting the same error as before, the only ROM that will install is the one that is not in english
I wont work it still gives me the same error as before invalid vendor .....
I dont know how to fix this i just want a stock ROM in english....
ftosam said:
I wont work it still gives me the same error as before invalid vendor .....
I dont know how to fix this i just want a stock ROM in english....
Click to expand...
Click to collapse
ftosam said:
I have no idea why it is still not working getting the same error as before, the only ROM that will install is the one that is not in english
Click to expand...
Click to collapse
Sir did you listen/follow my previous instructions!!!???
You can't install a WWE stock ROM (3.14.413.2) on your Taiwanese device (x.XX.707.x) you need to use the GoldCard!!!
It didnt work, it still gives error and i tried the goldcard way but it doesn't load anything i quickly flashes a screen that says loading and then it goes back to the boot loader and just stays there.....
ftosam said:
It didnt work, it still gives error and i tried the goldcard way but it doesn't load anything i quickly flashes a screen that says loading and then it goes back to the boot loader and just stays there.....
Click to expand...
Click to collapse
I have the impression that you are doing something that's isn't correct.
Lot of peoples who I know have used the Goldcard technique; and all without issues.
Ended up getting the goldcard to work (Used a different SD Card)....
However it STILL comes up with the same error. (If I try flashing wwe Asia from the sd card, it says " Not Allowed")
We have previously used all sorts or ROMs on this phone... but the same ROMs now seem to be giving this Vendor Error... It just doesnt make sense...
hi all
Is there a way to break hspl 3.03.0000 there?
Break HSPL? Be more specific.
bricked my leo2??
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
ligan35 said:
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
Click to expand...
Click to collapse
Install the old 1.72 etc ROM through SD card and it will replace the SPL then you can put HSPL 2.08 for your desired Custom ROM. I hope this helps.?
Yup its simple go to shippedroms.com ... get ur stock rom... flash it... and ya then flash the hspl and radio
Sent from my HTC HD2 using XDA App
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Click to expand...
Click to collapse
Task 29 will not work with SPL 3.03.
You need to go to HTC's website and use your phone's serial number to download an older version of the ROM - you will only be allowed to download ROMs which are allowed for your phone. You cannot download a HTC stock ROM if your phone is restricted to a branded (phone operator's) ROM. You should be able to get a 1.66 or 1.72 or 2.08 or 2.10 ROM (dependant upon branding and country).
Put the phone into BootLoader mode, then connect to your computer and run the downloaded file.
it works!!!
download old original rom like 1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
flash it via activesync/ win mobile center(win7)
it will downgrade 3.03.0000 to spl 1.42.0000
Thanks a lot for info!
Hey any clue how downgrading from a indian rom would be possible?
sudeep6258 said:
Hey any clue how downgrading from a indian rom would be possible?
Click to expand...
Click to collapse
Install the 1.47 stock rom
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
dacochir said:
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
Click to expand...
Click to collapse
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
samsamuel said:
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
Click to expand...
Click to collapse
Thanks for this message!
I just received my device back from repair, worried about the 3.03.0000
Awesome i don't have to worry about that anymore
My HD2 needs to go in for repair so I need to remove HSPL and flash a stock WinMo ROM ready for monday when it is getting collected.
I have followed the instructions here - http://forum.xda-developers.com/showthread.php?t=623402 but the screen does not go grey, there is a very quick flash then it returns to the multicoloured screen and pressing the power button does nothing
Would someone be kind enough to enlighten me here as I have to sort this before Monday.
Cheers in advance
Bry.
Bryski said:
but the screen does not go grey, there is a very quick flash then it returns to the multicoloured screen and pressing the power button does nothing
Click to expand...
Click to collapse
the quick flash is the bootloader looking for a valid file, and usually means one of a few things..
1 - the file isn't correctly named leoimg.nbh
2 - you simply renamed the htc_wwe_blahblah_.exe to leoimg.nbh instead of extracting ruu_signed.nbh and renaming THAT.
3 - you are using an sd card bigger than 4gb (not always the case, but most times bigger cards fail)
4 - the card is formatted FAT16 instead of FAT32
5 - hspl isn't installed after all and the ROM is not a match for the phones ROM/region lock. (what does the spl line say in bootloader?)
try those, see if it resolves it.
fix
go to http://forum.xda-developers.com/showthread.php?t=611433 and on the 4th post there is a zip at the bottom download unzip and run and just choose the non hspl
what hspl are you running?
Ok tried again and the bootloader screen looks like this
thats the right on but the last line about the touch is different i have 50 instead of 40
Any reason why it would be different?
Wanna make sure its dont right, dont want em sending it back and telling me I have hacked it
That's only a valid spl if you have a tmous,,,, if you have a regular hd2 then any spl starting 2 is wrong. Only tmous roms use 2.x spls.
Its a UK O2 phone mate, what have I done wrong then?
Bryski said:
Its a UK O2 phone mate, what have I done wrong then?
Click to expand...
Click to collapse
Well without scanning back through the thread, I'm guessing you had 2.08.hspl installed and ran hspl2 or 4, which will have defaulted to the opposite, namely 2.08.0000,
Or,you SD flashed a tmous stock rom, which didn't initially fail because hspl was installed, but then failed to continue to flash after the spl had changed because hspl was no longer there.
Fix - run hspl2 (hspl2 is the most usefull for us reg Leo users) and choose a matching spl to the rom version installed ...
Rom ....... spl
1.43 ....... 1.42.0000
1.66 ....... 1.66.0000
3.14 ....... 3.03.0000 -- you would need to use Hspl4 for this.
If the phone is buggered and wont boot, then it doesn't really matter which you choose, so long as it's one of those three.
(And in fact it probably wouldn't matter even if the rom and spl don't match,, they're only really interested in the spl, just nice to be cautious,would be a pain to have it sent back on a technicality)
Phone boots but I cant do anything with it due to the screen freeze which is why its going back to HTC.
Ok now it tells me I dont have SPL 1.42 on my phone and it refuses to flash a stock ROM :/
Guess I am screwed, new phone time
Bryski said:
Ok now it tells me I dont have SPL 1.42 on my phone and it refuses to flash a stock ROM :/
Guess I am screwed, new phone time
Click to expand...
Click to collapse
You're using the wrong hspl.exe, its v1 that requires 1.42 to work,,,try again.
Ok I think I got it
I should flash the latest ROM again aswell really as they asked me to do that when I rang em yesterday
All sorted and upgraded to the latest ROM ready to go back to HTC.
Cheers mate saved me a lot of heartache
Welcome...
while on this topic, im using Leo_RADIO_2.15.50.14** via HSPL
now i wish to return to my stock (which i am pretty sure is this :
RUU_Leo_HTC_Asia_WWE_1.48.707.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
(i copied down these details when i got my phone on the first day)
do i need to roll down to Radio 2.05.51.05_2 ?
i cant seem to get this ROM installed, whether its 1.42 SPL or 2.08 HSPL
i removed HSPL, and definitely not a TMOUS hd2 but cant install the stock rom
Hi All,
I m trying to go back from android to winmobile and my device is stuck...
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
I have tried to flash different winmobile roms include RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship and i have tried to flash HAED SPL 4 and i received error in device id...
In bootloader it appears correctly with SPL-2.08.HSPL 8G XE, and in the white eare it write Serial in in the begining and when I try to flash it change to USB.
The main problem is that I have tried to flash Energy.Leo.21916.Sense2.5.Jul.04 above android it stuck on 4% and I can't reflash anymore, when i try to reflash it stuck on 0% no matter what I do.
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
Please advice...
sagytb said:
I have tried to flash different winmobile roms include RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_
Click to expand...
Click to collapse
do you have a tmous hd2? because if you do you are VERY lucky not to have bricked it, , the tmous CANNOT just take any old stock rom, it MUST be a tmous stock rom, and that one listed above isn't.
go get the real tmous rom, try to flasj it over usb with the phone in bootloader, , if it fails, extract ruu_signed and flash it from sd card (4gb sd card or smaller, , bigger wont work)
If you get any errors (especially the blue writing on white when you sd card flash, , example ''radio fail'') let us know.
I have european device no Tmobile device.
Is there any hope?
Well rom update error usually means you tired to flash the wrong rom over SD card whilst hspl is installed, however since you say it still says 2.08.hspl then its not that,
(incidentally, that's not a correct spl,,,2.x are tmous spls, they'll work on the reg HD2,and are required for magldr Android etc, but they can cause issues going back to stock, nothing critical, but can annoy )
I personally think you have a stuck radio,, confirm this by flashing the correct rom from SD.
By correct rom, i mean if the phone is originally a german o2 phone, flash the german o2 rom, if it was bought rom unlocked (this has nothing to do with the network lock), from for example carphone warehouse, in the uk, then use the wwe rom, for uk voda, use the uk voda rom, only the correct rom will flash from sd card.
#take note of what it says, blue writing on white background, during the flash.
first, thanks for your help, i manage to flash wwe roms, but when i try to flash hard spl, it stuck again, in the phone, in bootloader menu (3 colors) i see usb mode and it doesn't continue to flashing mode (black screen) and it stuck on the SPL execution as well, some times i receive unknown errors.
I have tried to flash from sd card several wwe roms (i have no idea what was the original) and the problem is the same.
Any solution ?
Can i flash hard spl from sd card?
sagytb said:
Can i flash hard spl from sd card?
Click to expand...
Click to collapse
no, you can't.