[Q] Need some help ref: removong HSPL - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

My HD2 needs to go in for repair so I need to remove HSPL and flash a stock WinMo ROM ready for monday when it is getting collected.
I have followed the instructions here - http://forum.xda-developers.com/showthread.php?t=623402 but the screen does not go grey, there is a very quick flash then it returns to the multicoloured screen and pressing the power button does nothing
Would someone be kind enough to enlighten me here as I have to sort this before Monday.
Cheers in advance
Bry.

Bryski said:
but the screen does not go grey, there is a very quick flash then it returns to the multicoloured screen and pressing the power button does nothing
Click to expand...
Click to collapse
the quick flash is the bootloader looking for a valid file, and usually means one of a few things..
1 - the file isn't correctly named leoimg.nbh
2 - you simply renamed the htc_wwe_blahblah_.exe to leoimg.nbh instead of extracting ruu_signed.nbh and renaming THAT.
3 - you are using an sd card bigger than 4gb (not always the case, but most times bigger cards fail)
4 - the card is formatted FAT16 instead of FAT32
5 - hspl isn't installed after all and the ROM is not a match for the phones ROM/region lock. (what does the spl line say in bootloader?)
try those, see if it resolves it.

fix
go to http://forum.xda-developers.com/showthread.php?t=611433 and on the 4th post there is a zip at the bottom download unzip and run and just choose the non hspl

what hspl are you running?

Ok tried again and the bootloader screen looks like this

thats the right on but the last line about the touch is different i have 50 instead of 40

Any reason why it would be different?
Wanna make sure its dont right, dont want em sending it back and telling me I have hacked it

That's only a valid spl if you have a tmous,,,, if you have a regular hd2 then any spl starting 2 is wrong. Only tmous roms use 2.x spls.

Its a UK O2 phone mate, what have I done wrong then?

Bryski said:
Its a UK O2 phone mate, what have I done wrong then?
Click to expand...
Click to collapse
Well without scanning back through the thread, I'm guessing you had 2.08.hspl installed and ran hspl2 or 4, which will have defaulted to the opposite, namely 2.08.0000,
Or,you SD flashed a tmous stock rom, which didn't initially fail because hspl was installed, but then failed to continue to flash after the spl had changed because hspl was no longer there.
Fix - run hspl2 (hspl2 is the most usefull for us reg Leo users) and choose a matching spl to the rom version installed ...
Rom ....... spl
1.43 ....... 1.42.0000
1.66 ....... 1.66.0000
3.14 ....... 3.03.0000 -- you would need to use Hspl4 for this.
If the phone is buggered and wont boot, then it doesn't really matter which you choose, so long as it's one of those three.
(And in fact it probably wouldn't matter even if the rom and spl don't match,, they're only really interested in the spl, just nice to be cautious,would be a pain to have it sent back on a technicality)

Phone boots but I cant do anything with it due to the screen freeze which is why its going back to HTC.

Ok now it tells me I dont have SPL 1.42 on my phone and it refuses to flash a stock ROM :/
Guess I am screwed, new phone time

Bryski said:
Ok now it tells me I dont have SPL 1.42 on my phone and it refuses to flash a stock ROM :/
Guess I am screwed, new phone time
Click to expand...
Click to collapse
You're using the wrong hspl.exe, its v1 that requires 1.42 to work,,,try again.

Ok I think I got it
I should flash the latest ROM again aswell really as they asked me to do that when I rang em yesterday

All sorted and upgraded to the latest ROM ready to go back to HTC.
Cheers mate saved me a lot of heartache

Welcome...

while on this topic, im using Leo_RADIO_2.15.50.14** via HSPL
now i wish to return to my stock (which i am pretty sure is this :
RUU_Leo_HTC_Asia_WWE_1.48.707.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
(i copied down these details when i got my phone on the first day)
do i need to roll down to Radio 2.05.51.05_2 ?
i cant seem to get this ROM installed, whether its 1.42 SPL or 2.08 HSPL
i removed HSPL, and definitely not a TMOUS hd2 but cant install the stock rom

Related

RAPH Paper weight - SPL

Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Da_G said:
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Click to expand...
Click to collapse
Removed the SD and it stays at the tricolor screen with the spl version as mentioned in 1st post.
Also, displaying the Upgrade ROM code error, please try again message
The mode is currently serial
What can I do from here?
fireblade63 said:
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Click to expand...
Click to collapse
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
NotATreoFan said:
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
Click to expand...
Click to collapse
Hey man, thx for stopping by..
If I understand correctly, SSPL runs through the device which is stuck at bootloader currently... or am I hopefully wrong??
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Da_G said:
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Click to expand...
Click to collapse
Keep in mind im currently on stock SPL, do u think flashing the stock ROM is ok?
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
dude....i hate to say this...butyou might be s.o.l. at this point. i did the same to my fuze not too long ago... tryingto flash anything to the phone just locks it up.i was lucky enough to bs my way through an att guy to get me a new one (was still under the 30 day warranty).
Da_G said:
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
Click to expand...
Click to collapse
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
I had the same problem as you and could not flash any rom, Always get Invalid vendor ID.
You need the right Stock Rom to flash and in my case in the middleeast, the Stock Rom is so far only available in at HTC.
I had to take the phone to HTC Service Center and they flashed the correct Stock Rom and charged me as they did it out of warranty.
Regards
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
fireblade63 said:
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
Click to expand...
Click to collapse
Post in the HardSPL thread asking which ROM the SPL originated from. Once you know that, you can download the appropriate ROM from the Wiki.
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
shafez said:
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
Click to expand...
Click to collapse
The CID is determind by the SPL.
Look up the error code posted... everything points to HardSPL. Back in my Wizard days, HardSPL did not exist, and we just did a CID unlocking. This is not the case with newer devices.
All ROMs are not created equal. Each WWE ROM checks for specific information within the SPL, and if it doesn't find what it's expecting, fail...
stepw said:
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
Click to expand...
Click to collapse
I'm not sure
Where can I know that?
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
fireblade63 said:
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
Click to expand...
Click to collapse
Since you cannot get past the bootloader, your only option is to find the WWE ROM that matches the SPL you flashed. Even though the HTC ROM Tool "signs" the NBH file, it still won't fool the stock bootloader... if it did, we wouldn't need HardSPL.

[Q] HSPL help

long story short, put HSPL 2.08 on my TMOUS HD2 so i could use chuckyrom (which did not work.it didnt download as an exe)...i.need.to.take.it.off. ive spent the past day researching how to do it. ive searched this site over, and tried everything, yet when at the bootloader it still says i have cotullaHSPL on it...i need it back to the original so i can send it in for repair. i did not make a copy of whatever file i needed. i have nothing but a phone with HSPL that needs to come off...any help would be greatly appreciated! thanks!
oops duplicate
depends what your original was.
If its a tmous phone, run hspl3 and choose 2.08.0000
if its a regular hd2, run hspl2 and choose 1.42.0000 or 1.66.0000
and of course the rom didnt download as an exe, ,, custom roms never do, they come as an .nbh file, and you put that in a folder with customruu.exe and run customruu.
thanks for the quick response...did what you said...used the HSPL3 download and installed SPL-2.08.0000 and it says the usual MicroP(LED) and such...not sure if that still voids the warranty as the original i had was 1.42 i believe...but it doesnt say HSPL or Coulleta so i should be fine eh? any final way to move it back to 1.42? or will 2.08 work?
DoDaHarry said:
thanks for the quick response...did what you said...used the HSPL3 download and installed SPL-2.08.0000 and it says the usual MicroP(LED) and such...not sure if that still voids the warranty as the original i had was 1.42 i believe...but it doesnt say HSPL or Coulleta so i should be fine eh? any final way to move it back to 1.42? or will 2.08 work?
Click to expand...
Click to collapse
if it was 1.42.0000 then you should use hspl2 and set it to 1.42.0000 else yes, they will know you've been messing. 2.08.0000 only ships with tmous phones, and the only way you could possibly get 2.08.0000 on your phone is by using hspl.
(HSPL3 is really for tmous customers, use hspl2 to return yours to stock)
downloaded HSPL2 and tried to downgrade from 2.08 back to 1.42...it just went to an error message saying bad device ID (or something like that) also just tried putting the RUU_signed.nbh on my sd card, renaming to LEOIMG.nbh and starting in bootloader...it goes to a white screen that says loading... and thats it...is it stuck? any other option?
DoDaHarry said:
downloaded HSPL2 and tried to downgrade from 2.08 back to 1.42...it just went to an error message saying bad device ID (or something like that)
Click to expand...
Click to collapse
you got a telstra phone?
also just tried putting the RUU_signed.nbh on my sd card, renaming to LEOIMG.nbh and starting in bootloader...it goes to a white screen that says loading... and thats it...is it stuck? any other option?
Click to expand...
Click to collapse
what rom you trying to use? also, i think spl 2.x wont allow itself to be downgraded to 1.x this way (though im not 100% sure on that)
nope...its just a standard Tmobile USA HD2...i made the mistake of trying to hack it and put HSPL 2.08 on and need to return it but that voids warranty...so i need to take it off...right now its showing it has just spl 2.08 and the regular boot screen...no hard spl, just standard...will that be ok?
DoDaHarry said:
nope...its just a standard Tmobile USA HD2...i made the mistake of trying to hack it and put HSPL 2.08 on and need to return it but that voids warranty...so i need to take it off...right now its showing it has just spl 2.08 and the regular boot screen...no hard spl, just standard...will that be ok?
Click to expand...
Click to collapse
ahhhh ok, well then no, it never did have 1.42, 1.x only ever ships on regular leos.
not sure if that still voids the warranty as the original i had was 1.42 i believe
Click to expand...
Click to collapse
yes, 2,08.0000 will be fine.
awesome! thank you! the whole thing started when the first HD2 failed...so Tmo sent me another one...i managed to fix #1, and also killed and installed HSPL on the second one...so i would either have to remove it, or send my good one back and keep the broken one...my first one (thats working is showing it has spl 2.10 (my bad, i thought it was 1.42) so i only need to downgrade from 2.08, to 2.10...but if spl 2.08 wont void it and itll be fine, then im happy...thanks again!

[Q] Stuck at bootloader when trying to flash stock rom

Like the title says, im just stuck at bootloader and instead of booting to the white screen it just stays on bootloader and says "SERIAL".
Ive googled, youtubed, and searched here, and many have the same problem, but i have yet to seen a solution to this.
I have tried android and many custom roms, and now im back on original ROM and everything works great. BUT i have HSPL in my phone and i dont want it for now.
It is a very easy procedure in the guides and should not be a problem, but please how can i get my LEOIMG.nbh to boot from my memorycard?
It is formated FAT32, and i have tried redownload the stock rom and unpacked it with winrar several times, but the result is always the same.
Is there some way to go around this? I Just wanna boot from the memorycard and restore my phone.
FYI, the restore is just for warranty issues.. I just want to be able to go back just to be on the safe side..
Then after that i can try the cooked roms all days
Thanks!
What size is the microSD card? As there has been reports of problems flashing from 16GB cards.
While in bootloader mode, you can plug in the microUSB and the 'Serial' should be replaced by 'USB'. This means that you can run the flashing from the computer (just ignore the requirement for ActiveSync).
Thanks for the quick reply!
I have a 8 GB memorycard.
Just before i read your post i inserted the usbcable and the screen on my htc says "USB".
But how do i uninstall HSPL from my PC in usbmode? Use customRUU and place LEOIMG.nbh in that folder?
If you install either the HTC Stock or your mobile provider's ROM (what ever you need for warranty requirements), they will flash your phone with SPL, ROM and RADIO.
These ROMs are avaiable from your mobile provider's website or via a link in the ROM Section.
Sounds great!
So i just run the original .exe file from my PC when my HTC HD2 is in bootloader screen in USB-mode, correct?
I have alreade flashed with original rom from PC when my phone was online. But then the HSPL did not go away even though my original rom was installed.
I could use alittle help too
when i try to update it stops at 4% tried to flash other energy roms with the same issue. don't know what todo to get past 4%
fred_up said:
If you install either the HTC Stock or your mobile provider's ROM (what ever you need for warranty requirements), they will flash your phone with SPL, ROM and RADIO.
These ROMs are avaiable from your mobile provider's website or via a link in the ROM Section.
Click to expand...
Click to collapse
won't flash the spl over usb whilst hspl is installed.
H4z3 said:
Sounds great!
So i just run the original .exe file from my PC when my HTC HD2 is in bootloader screen in USB-mode, correct?
I have alreade flashed with original rom from PC when my phone was online. But then the HSPL did not go away even though my original rom was installed.
Click to expand...
Click to collapse
use the hspl.exe program to remove hspl just like you used it to apply it. just choose a stock spl instead of the hspl.
example, regular hd2, wants to go back to o2 stock everything.
run hspl2, choose 1.66.0000
run the o2 1.72.exe rom over usb.
all done.
if the rom doesn't flash its not the correct stock rom.
samsamuel said:
use the hspl.exe program to remove hspl just like you used it to apply it. just choose a stock spl instead of the hspl.
example, regular hd2, wants to go back to o2 stock everything.
run hspl2, choose 1.66.0000
run the o2 1.72.exe rom over usb.
all done.
if the rom doesn't flash its not the correct stock rom.
Click to expand...
Click to collapse
At first i used HSPL 3 to install 2.08.0000 HSPL.
But if i run that file again i only have the choice 2.08.0000.
I downloaded a previous version of HSPL, and there i could choose SPL 1.42.0000 wich was my original SPL version before the flash.
Is this a correct way to do this?
I am asking again because even though i now am at the original ROM and Original SPL version the Radio and Protokoll-version differs from the versions when i bought the telephone.
radio and protocol doesn't matter. yes you've done it right. so long as its a stock rom and the spl ends 0000 then it's fine.
Ok thanks!
Then everything is ok now and i am very happy for that, so thanks for all answers!
I can also add that i took my original SD-card (2GB) and put the LEOIMG.nbh on it.
The bootsequence then started ok when holding down volumebutton and power on.
But the result was exactly the same as it was when flashing to stock SPL with HSPL2 utility.
So the booting-problem was memorycard related.. So it seems that even some 8 gb memorymodules have problems.
Just thought you should know.

[Q] Uninstall SSPL 3.03???

Hi guys,
At the moment i have SSPL.
I want to install HSPL3 - 2.08
but i cant unstall the sspl.
when i try to install hspl, i get error, BAD SPL VERSION
to install my sspl i used the folowing steps :
1. Remove SD (and remove Application Data and Program Files folders from it using SD card reader)
2. Remove HSPL with HSPL2_RUN.exe (flash SPL 1.66.0000 with HSPL2_RUN.exe)
3. PowerOff the phone
4. Boot to bootloader (VolDown+PowerOn) and when it shows "USB" flash stock ROM by running matching RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.15 .50.14_LEO_S_Ship.exe (get yours HERE or for Orange UK/FR HERE)
5. Hard Reset (when phone starts booting after step 4, remove the battery, insert it back press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
6. Boot to homescreen.
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
8. Hard reset (instructions in step 5)
9. when on homescreen - softreset.
10. Insert SD
Any help?
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
samsamuel said:
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
Click to expand...
Click to collapse
how can i downgrade?
its not working
as i said, get your stock rom, any version, but it must be correct for your phone, and flash it usb is fine. that's it.
AAh ok thanks it worked
I flashed original 1.66 ROM
No w i was able to install HSPL
Thanks!!!
no worries.
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
i had similar issues, i used task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work or install Android then. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
Is your phone branded (T-Mobile, Vodafone, O2, Orange, etc) and to what country?
If you are using a T-Mobile USA HD2, then you may try and flash the 2.08 TMOUS ROM.
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
lhayati said:
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
Click to expand...
Click to collapse
If you can find the previous stock ROM than yes. But it's a hard one to find (Orange UK)
Problem with spl3.03
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOW"
My S/N is HT04YNW00034
Please help me.
dalisman said:
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOWED"
My S/N is HT04YNW00034
Please help me.
Click to expand...
Click to collapse
Mate, do you want to upgrade or downgrade? You're statement is confusing
what do you mean "locked"?
As long as you flash the CORRECT STOCK ROM, you can upgrade or downgrade.
What you have to do first is find the CORRECT STOCK ROM".
you can't try all countries version, it is dangerous.
Go to htc website and select the country where your hd2 come from, and download the stock rom using your SN.
If you can't find the CORRECT STOCK ROM, the only alternative is using gold card method.
Good luck
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
dalisman said:
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
Click to expand...
Click to collapse
I think you haven't found th CORRECT STOCK ROM, that is why "not allow"
Gold card is a method to enable you to flash stock rom from other country (it is useful in a situation where you can't find the CORRECT STOCK ROM.
There is a thread for gold card, just using search button to find it out
Good luck
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
dalisman said:
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
Click to expand...
Click to collapse
Is it branded phone (telstra, Tmobile, orange, etc)? if yes, you should go to their website instead of htc website.
However, if you still fails, then the only alternative is using gold card method.
I never experience for this though I read it many times, so I would suggest you to search the forum. There is a thread title [GOLD CARD], just use search button.
Good luck
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
dalisman said:
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
Click to expand...
Click to collapse
I would suggest you to post this at the gold card thread, mate
Maybe there's someone can answer that.
Good luck

[Q] Bricked????

First of all i`m not a developer i`m a simple user of a HTC HD2 and i need your help guys cuz i`m in panic!!!!!!!!!
The story sounds like this, i installed Android on my phone, then it gave me errors cuz of the old radio. Then i decided to upgrade the radio to 2.15, and i decided to flash back my wm 6,5 to be able to sync it with windows 7 and make the radio update and i downloaded the img from this post http://forum.xda-developers.com/showthread.php?t=681317, i started the loading process and it suddenly stopped saying some errors appeared, not when i start it writes "Software update failed, please try again" red green blue white...
I`m in panic, what should i do!?!!
You have not bricked your HD2, and seeing as you have not posted back here in a several hours you may have solved your problem.
Just go to htc.com and enter the serial number of your HD2 and download the ROM from there then fllash it either by SD or RUU (USB).
helpp
let me tell you the whole thing.
first i had windows 6.5 on my htc hd2 t mobile .
i shifted to android 2.2 through the instructions available at xda forums.then i wanted it to convert to android 2.3 but i couldn't find any way so i planned to downgrade to windows 6.5 n then to android 2.3.
i followed the above old link that i mention in the first post to downgrade to windows 6.5 but wen i loaded the boot-loader it said update rom error.since then i only see the colored screen.i tried many roms but all say the same thing that rom file corrupted.but if i use different leoimg.nbh extracted from the stock rom ,the installation process doesn't starts and keeps on stuck at the o% level
help me out plzz
Re apply hspl which has probably gone, then flash rom over USB.
When I flashed 1.72 trying to restore stock, (yes correct rom) I got software update failed until I used hspl.exe to change spl to 1.xx from 2.08.hspl, dunno why it wouldn't take, but it wouldn't until I changed spl.
ignore this comment if you have a tmous, don't try installing 1.xx spl on a tmous.
re:help
when i try to install hspl it says u must have spl 1.42 but i am having 2.08 on my fone how shud i go to 1.42?
the only thing i can see on my mobile is the bootloader screen
That's hspl1 you are trying, use hspl2
can u give me the link to download HSPL2 .thnx
i wanted to tell that i am running 512 leo rom...
n sorry but can you tell me the whole process step by step..
i em really in an mess
the link is directly underneath the link where you got hspl form, , in teh hspl thread, post one, at the bottom, there are two links,, get teh bottom one
into bootloader
usb
run hspl2
choose 1.66.0000
run your rom flash from sd. <--- MUST be the correct stock rom for your phone and carrier, not just any stock rom.
samsamuel said:
the link is directly underneath the link where you got hspl form, , in teh hspl thread, post one, at the bottom, there are two links,, get teh bottom one
into bootloader
usb
run hspl2
choose 1.66.0000
run your rom flash from sd. <--- MUST be the correct stock rom for your phone and carrier, not just any stock rom.
Click to expand...
Click to collapse
Did you forget you have HSPL 2 linked in your sig, lol............
T-Macgnolia said:
Did you forget you have HSPL 2 linked in your sig, lol............
Click to expand...
Click to collapse
edit - dunno what my last reply meant, , stoned, tired, yea i had forgot, and i missread your post

Categories

Resources