Related
I got the monaco leather case for the 8125 from Extreme PDA:
http://www.extremepda.com/page/XPDA/PROD/cingular_8125_accessories/CING8125FLIPCASE
Even though a lot of people said they liked it and it seemed to be the most ideal for constant use, the bottom line is after a week I can't stand having it on my 8125. Here's what I realized:
- Even though it allows the keyboard to slide out, actually holding the device with the case flip behind it makes it tough to type comfortably.
- Folding back the flip every time I get a phone call and securing it in place is not practical.
- The cover inadvertantly causes the phone to either ignore or answer calls by applying pressure on the dial/hangup buttons. While this isn't an issue if the device is in standy, on an incoming call it is. Locking the device is useless because on an incoming call, the phone buttons are unlocked even if the device itself is locked.
After a week of this I finally gave up and took the 8125 out of the leather case. I am worried about it getting dropped/scratched but I just can't find a solution that's practical enough. How are the rest of you dealing with these issues?
yeah most people forget that it's a phone too and not just a pda. so having it in a case like that just makes it more work to answer calls and use the device.
I'm using the Mobile Glove Executice Black Tie Series holder. its a better design than the free case that comes with the 8125. The flap has a magnet in it so it closes really good. I bought it at a mall stand for $30 http://www.mobileglove.com/mobileglove.html it's design for the Treo 650 and similar handheld devices. it fits perfect
I purchased this case and am very happy with it. I don't experience any of the issues described by devGOD. http://cgi.ebay.com/Deluxe-Leather-...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've bought items from this person for other PDAs and highly recommend him. He also has some other cases for the 8125 available.
Geoffrey
Leather Cases
Hi there. The case listed above was my third case for the 8125. So far I like it the most. This is why I am still looking for a case. Taking it off and putting it on the belt clip is somewhat of a hassle because of the placement of the snap that keeps the thing closed. It gets in the way and it's making it hard to grab the phone in time to answer the ring. Also, using the keyboard is a little akward while it's in the case. Just take it out when at home but when out and about it gets a little tedious.
My next purchase might be the holster but at $30 it's a bit pricy.
Case to consider: Krusell Cabriolet
Here is what fit the bill for me.
http://sfplanet.com/product/87182
Use the phone/screen without any flaps. If you need to use the keyboard, it slides out easily. However, you can shake it upside down and it will stay put.
Krusell offers many choices for additional adaptors to fit your lifestyle. I bought and use their: Carabiner & Swivel Lanyard. I do like the belt clip one it came with - it is the easiest to remove that I've tried, but I don't like extra baggage around the waist.
Here is a link to a website that reviewed 8 cases.
http://www.4winmobile.com/htc-wizard-7-case-shootout-review-conclusion-vt1707.html
I'll look at one of those "deluxe leather cases" on ebay next. Just got a black metal PDAair case off ebay, trying it out. It's ok so far, not sure if it's a keeper. I'm used to having a metal case on my PDA, but I don't usually carry my PDA on my belt, so I'm not sure if I'll stick with it or go leather. I actually started to like the OEM pouch while I used it, but I want constant protection.
Has anyone tried the following case?
http://cgi.ebay.com/T-Mobile-MDA-PD...8QQihZ015QQcategoryZ15036QQrdZ1QQcmdZViewItem
out of my research, i'm beginning to believe that the case that offers the most protection, AND easy usage without much dabbling every time the phone rings seems to be:
http://cgi.ebay.com/Deluxe-Leather-...4QQihZ010QQcategoryZ15036QQrdZ1QQcmdZViewItem
can anybody post saying otherwise? I'm curious to see if anybody has tried it.
I wish those had black stitching, but that case is most likely my next canidate if I try another one.
My black pdair metal case is doing ok, though I had my first drop today, the stupid stud unscrewed from the back of the case. I was kind of worried about that when I got it, the screw was awfully shallow.
The best case is no case
Hi there:
I read the 8 case review and, after doing so, I purchased the Noreve model. It is a beautiful case. The problem is, for me, that I use my 8125 primarily as a phone, and then as a PDA. I also use it a fair amount with a GPS device. For the phone, I find it most useful OUT of the case. Or, sometimes, when it is in my car holder, it is also out of the case. When using GPS, it is out of the case (but secure).
The Noreve is beautifully made, but the 8125 inside of it is like a brick. I find it 'geeky' to use the case with the phone. In fairness, what I like about the Noreve is that the case folds BEHIND the unit when you are talking and therefore does not hang down like a big dog's tongue. You can also use the keyboard in the Noreve, but the device is not that securely inside of it.
The case I use almost everyday is a case I found on eBay. I prefer the horizontal case, although I believe there is a vertical model. It covers the device well enough, has holes for you to push the device out of the case while on your belt when the phone rings, and then allows you to easily slide the phone back in. The belt is secure, and it is fairly light weight. I used to carry my old iPaq in my suit pocket. The 8125 is just too heavy; it works much better on the waist.
It is cheap but durable and it works!
http://cgi.ebay.ca/Cingular-8125-Po...2766581QQihZ014QQcategoryZ15036QQcmdZViewItem
Oh, BTW, that deluxe case is the same case Brando has.
http://shop.brando.com.hk/bwdopod838leathercase.php
i ordered mine tonight. Given the insane amount of research ive done, i'm definitely sure this one is going to be the one with the least amount of risk to try. I'll let you guys know when all is said and done.
Lex, I know what you mean about spending insanely long hours researching cases, as I just went through it. In a fashion uncharacteric of the way I usually work, I ended up buying four cases: Sena Form-fit, Krusell Cabriolet, Krusell Handit, and Piel Frama. The latter is the model with the strap that allows using the keyboard without removal from the case.
I read the 8-case review over and over, and still couldn't decide. The Krusells were cheap, so I bought two on Ebay for a total of $40. I found the Piel Frama on Ebay for $50. I decided to keep the Piel Frama and Handit. Here are some observations:
Sena Form-fit: Very well-made, but has one big flaw: The magnetic closure, which otherwise I like very much, causes the device to fall out if the case is inverted on the clip. In the first week the MDA fell out twice with no damage, so I sold the case. Also, the belt clip was backordered for a month, and I don't know if that has been rectified.
Krusell Cabriolet: Okay, but leaves screen pointing outward and unprotected; same for top. With the swivel clip I was worried it would fall out like with the Sena issue above. I was nervous using it, so I returned it.
Krusell Handit: Nice, inexpensive, well-designed, and no big flaws. I'm keeping it. I would recommend this one for an expensive case that works very well and looks good, but the keyboard is not accessible without removing the device. The swivel belt clip sticks out a bit and flops around on your belt, which is a minor irritant.
Piel Frama: Well-made, very nice looking and stylish, and another keeper. This will be my main case, but it has some flaws, too:
1. The card slots are directly over the screen (no problems so far). A moderate blow might cause the cards to touch the screen, but I'm not sure if that's a real concern.
2. The flip tends to trip the top-front buttons, but I usually put my device in standby before closing the flip, so this isn't usually a problem.
3. Earpiece connector is difficult to negotiate. The hole doesn't line up precisely and the flip is hard to snap when it is inserted. This isn't a major problem.
Virtues include accessibility to the keyboard by just removing a small strap. Best looking case I've seen.
I've decided there is no perfect case, and the only way to determine which is best for you is spend two weeks researching like I did. The 8-case review previously cited is a good start, and if you want a Krusell or Piel Frama keep an eye out on Ebay. The Piel Framas are hard to find, and from the manufacturers site in Europe they are $75, but show up on Ebay from time to time. I was emailed last week with an offer for one like mine from an Ebay seller for only $46 shipped, so if anyone wants a Piel Frama with the strap, let me know. It may still be available.[/b]
Does anybody know if there'll be a pouch for the diamond 2 like for the diamond? Or simply will the Diamond pouch fit the diamond 2?
the diamond 1 pouch does not fit the d2
Don't think there is an official pouch, pdair have quite a few different ones available tho.
G
If you look at the Tracy & Matt unboxing video, its shows an HTC Pouch in the box. However, everyone so far has said it doesn't come in the box. Conclusion? I think there is/will be one, but it will a separate purchase like the with the D1.
I've been looking at the Beyza pouch for the Samsung Pixon. The Pixon has identical size stats to the D2 (well its 1mm wider), so if its just a pouch you are after, that may fit the bill.
Pdair are now selling a vertical pouch without belt clip, just ordered one myself.
available here
galvinize said:
Pdair are now selling a vertical pouch without belt clip, just ordered one myself.
available here
Click to expand...
Click to collapse
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Darrenives said:
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Click to expand...
Click to collapse
Not sure how long delivery will take but will do when I get it.
Horizontal Pouch, HTC Brand
I bought this one: http://www.negrielectronics.com/touch-diamond-leather-pouch-p-2424.html
It is a Velcro closure and the phone does not fit well. further, it does not have a hard side to protect the touch screen. I assume this is a general case by HTC. I bought this, but I will probably continue to use the case from my Trinity, the fit is the same but this at least has some protection on the sides.
In a word, Disappointed. I am not sure why they skipped the case, and then fail to offer a decent one at launch time.
http://www.noreve.com/index.php
Looks like Noreve are going to do one too. Expensive, but nice, classy cases. See upcoming products at bottom of web page.
Asia model comes with those pouch similiar to original Touch Pro.
http://www.eprice.com.tw/mobile/talk/?prod_id=3306&tid=4110889
Just be aware of these pouches
I did not get one with this or the TD1 ... with the TD1, the original one went on stock very quickly and I bought it for almost £10!
While the fitting was slim and snug, I couldn't help thinking that the tight fit had potentially caused light scratches on the rear (front I was not bothered as it had the protector on)
On the day I sold it, I did a very intensive clean on it and noticed there were indeed scratches that corrosponded with the pouch.
It only takes a small bit to be trapped in the pouch - you then slide the TD1 in and that bit goes down with it
I still don't know however what I want for my TD1, at the moment, I am using the original Ipod velour case that was bundled with I think the original 20gb ipods!
http://mobile.brando.com.hk/htc-touch-diamond-2-bw-leather-case-flip-top-_p04094c1213d039.html
http://mobile.brando.com.hk/htc-touch-diamond-2-bw-leather-case-pouch-type-_p04093c1213d039.html
or Krusell Luna fit
hsukirk said:
Asia model comes with those pouch similiar to original Touch Pro.
http://www.eprice.com.tw/mobile/talk/?prod_id=3306&tid=4110889
Click to expand...
Click to collapse
is it possible to buy these pouches any where, as i personally like these the best
da_daman said:
is it possible to buy these pouches any where, as i personally like these the best
Click to expand...
Click to collapse
Yes, I prefer this pouch too. Unfortunately the HTC designation of that pouch is not mentioned on their website (i.e. the HTC PO S390 as for the D1), so a purchase seems to be tricky....
I just bought this http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=360151845729 since i want as thin as possible.
This isn't going to appeal to everyone since they aren't bargin basement cheap but I've just got one of these cases delivered this morning. I went for Nappa cowhide black B on the outside and red suede leather for the lining with no belt clip attached and hidden magnet closure. The case itself looks fantastic, stiching quality is excellent (not a loose piece of thread visible anywhere) and overall protection where its needed the most (on the screen) is hard to beat with the wrap over flap on the front. It took a couple of weeks from order to delivery, but for a case which is made to your own specification, right down to having your name embossed on the front, that isn't bad. If you want a quality product made to you want it, and personalised, give them a go, I'd definitely recommend them. They do a range of different styles so if a fold over horizontal pouch isn't to your liking have a look at the other options.
Nice, i just orderd one too
Nice cases, not cheap although they look very nice...
I have found my HTC Kaiser case that came with phone and I'll use that until something better comes along.
Darrenives said:
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Click to expand...
Click to collapse
Got the case yesterday, it adds quite a bit of bulk so if you're looking for a really slim fit then look elsewhere, other than that it is of good quality and has a nice professional look about it so is ideal for work. It also offers lots of protection for the device.
G
@galvinize: is it possible to take the belt clip off? doesnt look like in promo pictures - but in yours.
edit: could you please take a picture with the front up - or is it just a sliding case?
For anyone here looking to buy the near-pefect + inexpensive leather case for the G-Tablet check out the video at youtube titled "review of a kindle DX case for the Viewsonic G Tablet", which does a very good job of showcasing it.
I bought one myself and i am very/very pleased with it; It fits like a glove, looks very nice, sturdy and expensive and offers very good protection.
For $19.21 plus shipping from Amazon.com it's a best-buy for leather covers for the G Tablet and the name of the manufacturer is CaseCrown.
Same here... Excellent case for the money...
I was just going to delete my post because, dumb me, there is already a thread on this leather case under "My review of the Kindle Leather Case" by S2W, with a link for his video at youtube.
Actually i would like to thank S2W for helping me find this particular leather case and for the money he saved me !
avfreak4ever said:
I was just going to delete my post because, dumb me, there is already a thread on this leather case under "My review of the Kindle Leather Case" by SW2, with a link for his video at youtube.
Actually i would like to thank SW2 for helping me find this particular leather case and for the money he saved me !
Click to expand...
Click to collapse
I got the Case, but I am not too happy with it since one or two corner doesn't fit well.
just out of curiosity, which corner are you reffering to ? Is it the one over the power switch ?
The reason i'm asking is because that was the only leather tab that almost blocked the very edge of the switch on my G-Tablet, almost but not quite...
I found that this leather case fits tightly around the G-Tablet and yet not in any way that impeded me from accessing any switches and controls and, as i expected, i wish the outside leather tab that holds the front cover offered a means to secure it out of the way and from hanging in front of the screen when opened; To fix that i am thinking of attaching a small, nearly imperceptible piece of black velcro to its back and to the back of the case so that i could attach the tab to the back of the case when in use.
avfreak4ever said:
just out of curiosity, which corner are you reffering to ? Is it the one over the power switch ?
The reason i'm asking is because that was the only leather tab that almost blocked the very edge of the switch on my G-Tablet, almost but not quite...
I found that this leather case fits tightly around the G-Tablet and yet not in any way that impeded me from accessing any switches and controls and, as i expected, i wish the outside leather tab that holds the front cover offered a means to secure it out of the way and from hanging in front of the screen when opened; To fix that i am thinking of attaching a small, nearly imperceptible piece of black velcro to its back and to the back of the case so that i could attach the tab to the back of the case when in use.
Click to expand...
Click to collapse
Yes, that's what I have observed that both my leather tabs are trying to come out when I am using my tab.
I am going to do exactly what you are describing to use black velcro to secure the back, so I don't have to worry about my kids abusing it.
Beware of the cheap eBay cases. I've tried several styles and one has basically ruined the painted trim on one of our NTs. Ironically the cheaper one with the elastic straps causes the least amount (no) damage while the ones with the "leather" frame-type holder has rubbed off or damaged the trim on another of our NTs. The elastic straps also do a better job of holding the NT since the "leather" trim ones has begun to stretch and allow the tablet to slide around.
Could you post a pictures?
I got a Moko Folio case off amazon that did something similar. It put dyed black dots all over where the felt-ish backing touched the nook. My fix was to put a skinomi on so the dots would not get worse but I am still disappointed.
yea i bought one of those cheap cases on ebay for like 18 bucks. i am starting to see some leather stains on my NT... any ideas on how to get rid of them? i already tried rubbing alcohol which didn't work, my next idea is to use vinegar...
ShinnAsuka said:
yea i bought one of those cheap cases on ebay for like 18 bucks. i am starting to see some leather stains on my NT... any ideas on how to get rid of them? i already tried rubbing alcohol which didn't work, my next idea is to use vinegar...
Click to expand...
Click to collapse
I bought a cheap silicone sleeve and cheap neoprene soft case. I'm going to try them out tonight and update my thread afterwards as to how they work.
KOCTA said:
Could you post a pictures?
Click to expand...
Click to collapse
I'm hoping it's just the color from the cover but I tried to clean it off and it didn't work.
Sorry it took so long, but here are the pics - excuse the dirty screen - seems like the screen savers smear up more that the unprotected screen:
ShinnAsuka said:
yea i bought one of those cheap cases on ebay for like 18 bucks. i am starting to see some leather stains on my NT... any ideas on how to get rid of them? i already tried rubbing alcohol which didn't work, my next idea is to use vinegar...
Click to expand...
Click to collapse
You can try oxalic acid containing products ("Barkeeper's Friend") and if that doesn't work it's pretty permanent. It's stronger than vinegar but it's the same idea; it should be safe on plastics. This is assuming it IS a stain and not rubbed off (the above looks rubbed off).
CheapGuy said:
I'm hoping it's just the color from the cover but I tried to clean it off and it didn't work.
Sorry it took so long, but here are the pics - excuse the dirty screen - seems like the screen savers smear up more that the unprotected screen:
Click to expand...
Click to collapse
I bought the same case in those pics and took the same cornholing . I tried all kinds of stuff to clean it and stopped just short of acetone. Right now my nt has a Skinomi skin on it, but when that eventually gets scuffed up and removed, I'll try that barkeeper's friend suggestion.
Sent from my BNTV250 using xda premium
The same thing happened to me.
I bought cheap "leather" case from ebay. After I noticed this thread I checked my Nook and it has these marks
It is a first time a have such issues with cheap ebay cases.
It looks like it is a stain not a rubbing off of nook plastic.
Probably it is a black dye from fake suede used as liner migrated to the nook plastic.
Plastic used in Nook definitely is a factor.
I wish I noticed this thread before I used the case. I ordered new one from BN.
I would greatly appreciate if somebody shares a way to remove these marks.
try the speck fitfolio, picked mine up from amazon. works pretty good, doesn't cover the front and it has a soft suede backing so no problems with scuffs
Has anyone tried those types of cases that have fabric (rather leather/"suede") inner backing?
Let us know if they do come off. I have noticed some slight staining on mine and am probably going to buy a more fabric based case.
TBH it doesn't bother me too much since I mine is almost always in a case. I get nervous when it's not.
I got my case (actually, one of those things that make your tablet look like a book) from B&N for $19 on sale. It works perfectly and gets a lot of compliments. I wouldn't get those cheap eBay ones...
I was really close to buying one of the Moko until I saw that Snugg made a case for the Nook. I'm glad I did after seeing this thread. The Snugg case is great and hasn't stained my tablet.
http://www.amazon.com/Snugg-Quality...8YTY/ref=sr_1_1?ie=UTF8&qid=1330541401&sr=8-1
News flash: Cheap chinese knock offs causing damage. News at 11.
Judging from the pics it looks more like rub off then residue. But knowing they used the lowest grade materials I wouldn't it put the idea of cheap ink soaking into the rubber plastic of the NT case either. Good call on the bartenders friend. That stuff has saved me in the past. As has the Mr. Clean Magic Eraser.
I would not use goo gone though. I've had that crap destroy plastics in the past.
I do hope you guys are able to get your nooks looking good again. I know I love keeping mine in pristine condition and would be pretty upset if something bad happened to mar it's surfaces.
You're better off buying the covers from BN.
I didnt buy the cheap leather chinese case from ebay becuase it was cheap, I liked it cuz it had the ability to fold into a stand. The barnes cases dont have that, but I severely regret not having bought one now.
The Last Master said:
I didnt buy the cheap leather chinese case from ebay becuase it was cheap, I liked it cuz it had the ability to fold into a stand. The barnes cases dont have that, but I severely regret not having bought one now.
Click to expand...
Click to collapse
http://www.barnesandnoble.com/p/tasume-in-carbon/22193460
You should have searched a little more. At $40 and free shipping after a promo code, this was worth every penny.
Solar.Plexus said:
You should have searched a little more. At $40 and free shipping after a promo code, this was worth every penny.
Click to expand...
Click to collapse
I like it, but its bulky looking, I like cases that don't add bulk.
Ill probably get the black silicone case from B&N, since its the only one I like that covers up the scuffs left by the ****ty ebay case. Im willing to try drops of acetone with cotton swabs, worst case scenario, ill pull the thing apart, and paint the bezel.
The Last Master said:
I like it, but its bulky looking, I like cases that don't add bulk.
Ill probably get the black silicone case from B&N, since its the only one I like that covers up the scuffs left by the ****ty ebay case. Im willing to try drops of acetone with cotton swabs, worst case scenario, ill pull the thing apart, and paint the bezel.
Click to expand...
Click to collapse
It's not actually that bulky. The covers are really thin and are made of an almost rubber material. The flaps fold back and are held together by magnets inside.
It was a really good idea from Barnes and Noble if you ask me. Perfect for working out of my e-book textbooks during class.
Hello
Have any of you tried the TRIDENT AEGIS case for the ATRIX 4G. It surely looks great and functional, but I'm not sure abut the build quality as it can be docked along with the phone. Please post your review and pictures
Sure!
Just ordered from their site, and look very promising, JUS THE WAY I WAS EXPECTING A CASE TO BE for the Atrix! (And let me tell you I own at least 6 cases each one 30+ f*** bucks)
Once I get it delivered, will upload a modest review and some pictures attached in HD dock and Lapdock, (´cause of course, it won´t fit car dock)
My primary case is an Active Case from Seidio (such a fantastic combo) along with its Holster Clip. However, taking my Atrix out of the case for car dock navigation or simply hd dock is a pain to the a-....
OK! I remember! (this mojitos won´t help that out... however, mmmmm!) The point of this case for me is to get it fit in the holster clip from seidio active without the case for sure, using trident´s.
Will let you know!
ok, let us know, i just felt in love with the nice "man solid appeal"of the case
Think it twice
Hey guys,
As you know I ordered this case some time ago, and just received it. And you know what? I´m not in the mood to make a review of it, at the second attempt to open the flap to engage the media/dock mode, one of the strings just broke up, the bottom one, so easy (and I´m a very careful person regarding these matters) without forcing it at all or aplying so much pressure.
So if you want to try for yourself, go for it BUT PLEASE, excercise the most delicate usage if don´t wanna go my way.
So sad...
trident aegis
First, this case is on sale at Amazon for $10 including shipping!!
I am impressed with the quality and feel. This origionally sold for around $35 and you get what you pay for. It comes with a screen protector (a dry one) also a covering for the camera lens. I have a plastic plug for the earphone jack I got off ebay for $1.
This is a hard polycarbonite case, not the soft flimsy type, and it is thin yet sturdy and feels and looks great. So far I love it.
If you place your thumb on the center back logo when opening, it opens easily.
If I find any problems or any disappointments I'll post here. But for $10 you can't go wrong.
I'm sorry to hear about your bad experince with the case but so glad you are telling about.
There seems to be mixed thoughts on the case. Decided to get the seidio surface as I only hear positive feedback on this.
CK
Yeah mine broke at the hinge after a couple of weeks too.
best case
I've had almost every case made for the Atrix. The Aegis is by far definitely my favorite because it is small, neat, nice materials, feels good, looks great. Yes the hinge is a bit delicate, but if you CAREFULLY open the case you can avoid breaking the hinge. And even if you break it you can still use the case depending on how bad it breaks. The case is made from a hard polycarbonite material, not a soft rubbery silicone which I got very tired of over time. These cases are on sale on Amazon for $10, down from the regular $30.....cheap. I bought 2 of them just in case. Comes with a dry screen protector and a cleaning micro fiber cloth. Also comes with a camera lens cover but that added fog to the picture when using the flash so I don't use that. This case put new life into my Atrix so I am happy for the time being. I bought silicon covers for the ports off Ebay for a few bucks to keep out dust. Anyway just my opinion on things.