Hello. Just got my S2 a few days ago and I am still on stock F/W 2.6.35.7-19100BOK2
Now I an trying to connect the phone to my head unit (Pioneer AVH04100) via USB but no matter what I do the S2 will not mount the external Micro SD card.
I have gone into the phones settings and set up as Mass Storage but still no luck and I get the message " reading format" on my head unit but it stays like that for a few minutes then it will go to the S2's internal memory so I cant really browse any files as my Music is on the External Micro SD. Any help? Thanks
That maybe because your ICE is not compatible with android. It run on windows
Sent from my GT-I9100 using XDA App
MMmmm. Could be I suppose but why did it connect to the internal storage?
I just purchased a new car (a Buick Regal GS in case that matters) which has a usb input into the car entertainment center. Unfortunately, the car is not equipped with a2dp so I was hoping I would be able to plug my Atrix in via the usb and access my media that way. However, both my phone which is running jokersax's cm9 and my wife's which is running stock show up as "unsupported devices". I'm hoping someone out there has run into this and has a fix?
To follow up on this. I reformatted my external sd card and moved only 1 folder witih a few mp3s on it back to the card. I then plugged the card into my car using a microsd usb adapter and the card was read successfully. Moving the card back to my phone it was unsuccessful. I tried the multi mount app from the play store to mount only the external drive but was still unsuccessful. Obviously taking the sd card out each time I want to read it is not ideal. There must be a way to have the atrix present just the external sd card in the same manor as the usb adapter?
Totally guessing here, but when you plug it into the computer with SD card access via usb, it will mount both the internal and external SD cards. Perhaps trying to mount two volumes is throwing the car stereo for a loop. see if you can plug in the phone without the external SD card and get it to read. Also, just to verify since you didn't explicitly state it, you are using setting the phone to sd card access when you connect it to the car right?
Yes I'm using USB mass storage mode. And I've tried the other options as well just for fun. I did try without the external SD with no luck. I also tried to mount just the external card using the multi mount app with no luck. Appreciate the ideas.
Sent from my MB860 using XDA
Try to mount it from recovery?
Sent from my Neutrino-loaded ATRIX
Mounting USB in recovery does work... I hadn't thought of that. Not really a useable solution though as I need my phone on for calls/GPS/etc at the same time.
Sent from my MB860 using XDA
airic37 said:
Mounting USB in recovery does work... I hadn't thought of that. Not really a useable solution though as I need my phone on for calls/GPS/etc at the same time.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
Then it is somewhat ROM-related. I mean the way the ROM handles USB mounts... it is different / worse than in Recovery. Try multiple ROMs, see if any works...
Sent from my Neutrino-loaded ATRIX
According to this Photon users are having issues as well. Though it may suck, I would just use the 3.5mm jack, which sounds like it is present, and use that for audio playback. Maybe try contacting Buick's support see if they have anything.
Thanks caster. I came across that thread on buickforums also. I have been using the 3.5mm jack which obviously works fine. But having the ability to charge and control the playback through the stereo controls would be a great "upgrade". A have to say for what is a very nice vehicle the built in media functionality is pretty horrid.
Digging more into why it works through recovery and not through regular usb mass storage mode in my phone... I noticed if i attach the phone to my windows machine i automatically see 2 unmounted drives appear. When i perform a usb mount through recovery the external sd card is mounted at the "first" of those 2 drive letters. If i then go and perform a mount from my phone (running jokersax cm9 5.1) the internal sd card is mounted on the first drive letter and the external sd card is mounted on the 2nd drive letter. Using the multi mount app and asking it to mount only the external drive that drive is still mounted in the 2nd position with the first being left unmounted. Is it possible that the order is significant and the car can't see past the internal card?
Success!
I decided to pursue this idea of the order of the mount points being significant. So, I decided to try switching the storage option in CM9 and reversing the purpose of my sdcards. I usually operate in use internal storage mode, but I switched cm9 to use the external card. I then copied all of the contents of the internal card to the external, formatted the internal sdcard, and moved back just one folder with a few mp3s. I then set up multimount to auto mount only card 1 (I'm not sure if this step is actually necessary), plugged in and and my car happily started playing my mp3s. Now if I can get my podcasts to sync automatically to the internal card and then resume from where it left off when I plug/unplug in the car... I'll maybe slightly forgive Buick for not including a2dp.
Thanks to everyone who chimed in and got my mind rolling in the right direction.
Hi,
I'm using a GS3, rom stock Jelly Bean, CFRoot 6.4, ext SD 32 Gb. and I recently buy a new car with USB entry. When I plug my phone No problem I can browse and play sounds while charging BUT it only read what's on \SdCard and... my music is stored on \Mnt\ExtSdCard\Musik therefore it's not read. I have no way to browse one level up. I'm pretty sure the issue is in the car system, so nothing to do on that side to solve my issue.
What can I do ? I have 12 Gb+ music so I can't move it back to internal memory..I was thinking on binding my directory or something... I found on this forum DirectoryBind but it unmount everything when pluging USB.
Any help will be highly appreciated
Cyril
Little up .... no one has an idea ?
Hello guys,
I guess I need help from you. I'm trying to connect my phone OnePlus One to FIAT 500 that features Blue&Me system. I've been at service several times and we just can't figure it out. All I want is to listen to music from the phone in the car.
Car radio doesn't recognize my OnePlus One. It says no source available. That happens if I'm in MTP mode. If I choose PTP, it recognizes it well, but there's no media found. And there's no media, because if I connect it to my laptop via PTP I can't create folders or put mp3 files in it. How can I fix it?
Additional facts:
I have Samsung Galaxy S4 zoom. It has internal storage that says Camera (PTP I guess) and MicroSD card. I can put music to Camera storage and it works perfectly in my car, while it doesn't from MicroSD.
If I try to put my USB stick I'm getting the same issue as with OnePlus One. My USB stick is in NTFS doesn't work, while in FAT32 does.
Hi everyone I recently switched over to Android from iPhone for the first time and have been researching all kinds of stuff like crazy.
My issue is getting my music and playlists to pop up in my cars media system when I plug it in via USB. All my music and playlists are on my SD card because it won't all fit on internal storage. I'm not as knowledgeable as many of you here but after doing some research I think the problem is because I cannot put my phone into mass storage mode and adoptable storage doesn't exist on this phone. When I plug it into my car the only sound files are some weather notification tone and another type of beeping noise or something.
If there's an easy way to manage music on my SD card without having to remove it and plug it into my computer I would love to know that as well. A couple apps I tried could only connect to my internal storage for some reason.
Thanks in advance.
I use "Poweramp" (which I think is the best media player available for android):
https://play.google.com/store/apps/details?id=com.maxmpz.audioplayer
and "Bluetooth Connect & Play":
https://play.google.com/store/apps/details?id=com.cp2.start.and.play.music.player
Bluetooth Connect & Play allows me to choose what app I want to launch when I connect to the media centre in my car (Power amp). Works perfect.
Stromma
Thanks for the reply but I don't want to connect with Bluetooth. I want a USB connection for the audio quality and so that all my media shows up on my car screen so I can search through playlists and sounds with my car not the phone
Does your head unit read your iphone like a hard drive? I think your head unit need to be android compatible for that to work on the G5 but I'm not sure.
My wife just told me hers does that. I'm not sure why it wont read from your sd card.