A friend just gave me a SGH-T959 Galaxy S Vibrant. It still has the stock 2.1 on it. I'd like to upgrade it to CM7 or maybe CM9, but all the instructions I've found say you should at least be on 2.2. I've been trying for several days to upgrade to 2.2 using Mini Kies. It downloads the rom (not sure where it stores it on my machine), reboots the phone in download mode and just sits. I left it for hours several times and nothing. If I reboot it it is fine when I reboot. It is just never copying anything to the device.
Is there a way to do the update without Mini Kies. I should also mention that my machine is a MacBook Pro running lion. I've tried this on a Windows XP VM in VMWare Fusion and I get the same exact results, it goes to download mode and then nothing.
xltrigger said:
A friend just gave me a SGH-T959 Galaxy S Vibrant. It still has the stock 2.1 on it. I'd like to upgrade it to CM7 or maybe CM9, but all the instructions I've found say you should at least be on 2.2. I've been trying for several days to upgrade to 2.2 using Mini Kies. It downloads the rom (not sure where it stores it on my machine), reboots the phone in download mode and just sits. I left it for hours several times and nothing. If I reboot it it is fine when I reboot. It is just never copying anything to the device.
Is there a way to do the update without Mini Kies. I should also mention that my machine is a MacBook Pro running lion. I've tried this on a Windows XP VM in VMWare Fusion and I get the same exact results, it goes to download mode and then nothing.
Click to expand...
Click to collapse
Whoops, mix up, JFD is 2.1 Eclair. You can still flash CM7 without 2.2, just follow this guide:
http://wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide
After flashing the kernel via heimdall, if it never boots, just wait a few minutes and pull the battery, then boot into recovery by VOL-UP + VOL-DOWN + Power, then continue.
Just flashed the zImage. I'm waiting for boot. The talking updates on time remaining are kewl. Thanks for you help. Hopefully all works well.
Is CM9 stable enough to run ok, or should I stick to CM7.2?
xltrigger said:
Is CM9 stable enough to run ok, or should I stick to CM7.2?
Click to expand...
Click to collapse
CM9's okay. I run it. But both CM7 and CM9 may still have intermittent issues with 911 calling. There are two people who can't call period (they _may_ have a corrupted /efs which would prevent them from calling even on stock now, but not sure). Some who failed and then worked, etc, etc.
Looks like I may have screwed myself. It won't boot after the zImage. I can boot CWM, but I can't do a USB mount in CWM. I can enter the menu, but it never shows up. If I had copied CM and GAPPS before the zImage I'd likely been ok. I tried putting the zip files on external MicroSD, but CWM offers me no way that I can see to apply a zip from that. It only sees the internal.
If you have any suggestions on where to go from here please let me know.
Update:
Even though I couldn't get into the device when booting normally, I was able to get connect using adb.
I did "adb push cm-9-20120707-NIGHTLY-vibrantmtd.zip /sdcard/" and was able to copy the update to my phone.
I did the same for gapps. So far so good. I'll update this post again when all is finished.
Update 2:
I've got CM9 installed and booted. Downloading my apps now. Thank you so much for your help /me is really happy now
If its your 1st time on ICS with the T959 I suggest reading this:
http://forum.xda-developers.com/showthread.php?t=1464423
Related
I was running the Axura Custom Rom, which I got here http://forum.xda-developers.com/showthread.php?t=821468, and for some unknown reason, I was inspired to reinstall Voodoo lag fix. So I headed over to the official website, http://project-voodoo.org/download, and I installed the version for Froyo where you use ClockWorkMod to install it. I think I did this because under system information, it said I was on 2.2. Anyways, I installed it with ClockWorkMod and what happened is two things. First, after booting it up, it went to the regular Samsung Vibrant screen then proceeded to show a Galaxy S G-I900 screen, and it got stuck there and refuses to move on. I left it on overnight, and in the morning, it was still at the same screen. So I went into Recovery Mode and disabled the Lag Fix, and that allowed me to get past that screen to the custom boot up screen that says "Devs4Android. Giving you a reason to have a phone". However, there's internal vibration at intervals of about 7 seconds or so, and I have reason to believe it keeps cycling on that screen. So, I basically haven't been able to get into the system. I tried using Odin to Flash my phone, but Odin just wouldn't seem to recognize my phone in download mode no matter what I tried. (Believe me, I've tried everything). However, Odin did detect my phone while I was in the Recovery Mode menu, but when I tried clicking start, there was an error. Any suggestions on how to restore/fix my phone?
You still have access to recovery, correct?
Assuming you do, you can push a new kernel and ROM to your device from your computer using ADB and flash those using CWM to see if it works.
In CWM, when you go to install zip from sdcard, do you see all your folders and things there, or is it missing a BUNCH of stuff?
Also what is your computer os? I has the same issue with odin not seeing my phone, (win 7 - 64bit) and just needed to go to samsung and get the usb drivers. Once I did that I was able to flash back to stock and then flash my current rom.
running team whiskey nero v3
Also, if you get the latest Axura 2.259 it is based on the Supercurio kernel it has the lag-fix built into it.
Like the other poster said get the right usb driver 32bit or 64 bit depending on your op system install that on your computer, Then get into recovery, see if you can flash the disable voodoo zip. Then, if it was me I Odin back to stock, but you may need to install the Eugene's froyo that does not brick first, then shut down the phone and then reflash in Odin the stock. (check the stickey in the general section
I'm a longtime reader, don't post too much.
I'm in desperate need of help. If you're just going to flame me, please save that for a little bit so I don't have to sift through it to find some help.
I have the ROM addiction--I've flashed just about everything available for the Fascinate. I am a novice at best (i've fumbled my way through ADB before), but have never had any serious issues. Tried to flash EB01 modem through Odin (was at DI01 still somehow), and Odin froze. After 20 minutes I closed and disconnected my phone. It wouldn't boot after that. I was running the EC10 Rom and kernel (v2, before it became nameless). And I accidentally flashed the 3.0 clockwork, so I couldn't do anything through recovery.
I was trying Odin 1.3 from a Vista machine (not mine, I run Ubuntu) to begin with. Finally got my hands on a Windows 7 machine and Odin worked great. Restored to DI01, then flashed Superclean 2.9.2, and had the correct Clockwork. Less than a day later, Zeam (which I had as my default launcher) started force closing. Somehow Clockwork reverted back to 3.0, so all i could do was try fix permissions. Tried to odin restore again, and odin froze again, from the Windows 7 machine this time.
I've tried different USB cables and ports on three different computers (Windows 7 and two XP's. I can't get heimdall to recognize it in Ubuntu (might not have the drivers loaded properly there). Odin at least recognized the phone earlier, and it would start to flash. After 4 or 5 minutes the screen on my phone would go black and the flash would just freeze. Restarted the computer, reinstalled the drivers. Kept trying to flash. Then the screen started to change colors when it froze--always a solid color, but changed with different flash attempts. White once, pink once, and i think blue once.
I've been on IRC and received some tips, but it's hard to get sustained attention there. Especially since i'm a n00b. I've read every post I can find.
I NEED my phone. My girlfriend is out of the country right now, and that's how we communicate. Skype, chat, etc. It's killing me not to have my phone right now.
Can someone please help me out? And if you must flame me, how about wait until my phone is working please
Thanks in advance
Well i'm a noob too but... I have read you should use oem cables. I guess people have issues with non-oem ones. I don't know why odin shouldn't run though. Just try flashing the right cwm. You can either try odin or just flash it in cwm itself.
I was hacing the same problem with odin 1.3, i have been using odin 1.7 for months with no problems. Here is a link for the one i use, hope it helps. http://www.mediafire.com/?t093btu771q0bgi
Sent from my SCH-I500 using XDA Premium App
thanks Dale, i'll try that now.
Exzackly--i was able to flash the correct CWM at one point but couldn't install a ROM through it. and now I can't connect to Odin at all.
thatoneguy1983 said:
thanks Dale, i'll try that now.
Exzackly--i was able to flash the correct CWM at one point but couldn't install a ROM through it. and now I can't connect to Odin at all.
Click to expand...
Click to collapse
Because this kind of question has been popping up all over the place, i put together a post with instructions, and links for everything you will need just to help everyone out. hope it helps you. http://forum.xda-developers.com/showthread.php?t=1026746
Ok...I'm at a point where I had no other choice but to get another replacement. I looked just about everywhere my patience would take me, and decided to give up. I hope someone could/would have a solution for me or others like me.
I had EH03 deoxed rom and decided I wanted ICS build5. So I installed CM7, I whiped cache, DLVK, and system data. Then flashed ICSb5 and GAPPS, Rebooted and stuck on ICS splash screen.
At this point USB ports wouldn't recognize fascinate. Downloaded all Fascinate drivers from Samsung, drivers for Nexus S, ADB, Android SK. You name it I got it. Nothing worked for USB detection. I even followed YT videos on turning Vista/PC off and unplug. Nothing.
After messing with data cords,(numerous ones,trying another PC), PC ports, I happened to pull plug and battery out of Fascinate at the same time, not sure what version of CWM, it was blue, came on. Luckily I had two Nandroid backups on SD.
I flashed Nandroid back to CM7 successfully. Rebooted fine and hooked to USB but still not recognized. At this point I was able to get into recovery using ROM. So, I did something stupid...lol...I tried to flash earliest Nandroid which was performed when on EH03 deoxed. Once I did this, I wiped all needed data and rebooted. Now Fascinate shows Samsung logo. It doesnt reboot, just that the logo stays until I pull battery. Now if I have battery in wth phone off and plug in, the charging battery comes on but doesn't show battery level. Doesn't go away till I pull battery.
The funny thing is that I can get into Download mode but USB is still unrecognized/malfunction on PC/Vista. I only wish that I was able to link phone and PC just to use Odin with PIT file and stock EDO5 or EH03.
Any advice?
dssheeley1 said:
Ok...I'm at a point where I had no other choice but to get another replacement. I looked just about everywhere my patience would take me, and decided to give up. I hope someone could/would have a solution for me or others like me.
I had EH03 deoxed rom and decided I wanted ICS build5. So I installed CM7, I whiped cache, DLVK, and system data. Then flashed ICSb5 and GAPPS, Rebooted and stuck on ICS splash screen.
At this point USB ports wouldn't recognize fascinate. Downloaded all Fascinate drivers from Samsung, drivers for Nexus S, ADB, Android SK. You name it I got it. Nothing worked for USB detection. I even followed YT videos on turning Vista/PC off and unplug. Nothing.
After messing with data cords,(numerous ones,trying another PC), PC ports, I happened to pull plug and battery out of Fascinate at the same time, not sure what version of CWM, it was blue, came on. Luckily I had two Nandroid backups on SD.
I flashed Nandroid back to CM7 successfully. Rebooted fine and hooked to USB but still not recognized. At this point I was able to get into recovery using ROM. So, I did something stupid...lol...I tried to flash earliest Nandroid which was performed when on EH03 deoxed. Once I did this, I wiped all needed data and rebooted. Now Fascinate shows Samsung logo. It doesnt reboot, just that the logo stays until I pull battery. Now if I have battery in wth phone off and plug in, the charging battery comes on but doesn't show battery level. Doesn't go away till I pull battery.
The funny thing is that I can get into Download mode but USB is still unrecognized/malfunction on PC/Vista. I only wish that I was able to link phone and PC just to use Odin with PIT file and stock EDO5 or EH03.
Any advice?
Click to expand...
Click to collapse
In the op of ics and also droidstyles guide you have to flash build 1 before you can flash build 5
Sent from my SCH-I500 using XDA App
I've never flashed version 1 before flashing.build 5. In fact I've had the least amount of problems going back to stock (ED05) then flashing ICS.
I bootlooped when i went from stock EH03 to Build 5 so i did 3 first then 5.
But this doesn't help our poster here.
OP:
you get into DL mode but odin wont see your phone?
What i suggest is to try: Move the usb cable to a different port. see if your pc can see it then. Second thing try a totally different computer. Chances are your PC is trying to use borked up drivers.
Once you get odin going flash a stock image [i recommend eh03] then cwm then build 3 and now the new build 6. good luck!
if you need any links or a more detailed guide I STRONGLY suggest Droidstyles guild, it is by far the best and most up to date for the fassy!
OhioYJ said:
I've never flashed version 1 before flashing.build 5. In fact I've had the least amount of problems going back to stock (ED05) then flashing ICS.
Click to expand...
Click to collapse
Consider yourself lucky....going from stock to build 6 causes me problems and many others. Going from stock, to build 1, then build 6 works flawless.
MOD please close thread due to lapsed timeline and no longer support of this model.Ty
Sent from my SGH-i717/GT-N7005 w/phMOD_beta2
dssheeley1 said:
MOD please close thread due to lapsed timeline and no longer support of this model.Ty
Sent from my SGH-i717/GT-N7005 w/phMOD_beta2
Click to expand...
Click to collapse
You realised you just bring a a old thread back yourself and no longer support of this model wtf you realise people.still use this phone everyday Right?
Sent from my SCH-I500 using Tapatalk 2
This is what happens when you have too much info with waaaay too little experience.
Bought an unlocked Vibrant from Amazon a year ago after the original tmobile one got stolen. It had issues like freezing up, tons of apps running all of time, etc. I finally tried installing froyo and it made the phone SO MUCH BETTER! Everything ran 1000% faster. I should have stopped there. But, it was pretty addictive I started reading about the new ice cream roms and somewhere, before I even got into it, I messed up the internal sd card. I have been working on this for a week, reading, downloading, flashing, etc. I feel like I have tried everything and have gone around in circles.
I can get into download mode with no problem. The furthest I have gotten after that was getting the "pass" in Odin. The phone does the boot up, then stay on the Galaxy S screen. Now, my computer won't recognize the phone (which has already happened) but now I am soooo confused and frustrated about where to go next. I have used AIO toolbox, Eugene's no brick, installing new drivers, new usb cord, etc.
Sorry so long. Thanks again.
bump...hope someone can help.
Could you give a clearer explanation/timeline of what you did? How did you mess internal sd?
Did you Odin stock jfd?
Sent from my GT-I9000 using XDA App
nolamom said:
bump...hope someone can help.
Click to expand...
Click to collapse
Is Clockworkmod recovery installed? If not, google: Samsung_Vibrant:_Full_Update_Guide and go to the Cyanogenmod wiki entry. Read through the "Installing Clockworkmod recovery" section.
In addition, from Addictivetips, to start recovery mode using the hardware buttons:
"Using hardware button combination on most Android devices:
On most Android devices including ones by HTC, you can enter recovery by powering your device off and then powering it back on while keeping either the ‘Volume Down’ or the ‘Volume-Up’ button pressed, depending on the device. This will enter the bootloader from where you can select the ‘RECOVERY’ option by navigating to it with the Volume key and entering it with the ‘Power’ key.
Sorry, but I'm not allowed to post links yet.
On most Samsung devices specifically Samsung Galaxy S series devices, you must keep both the ‘Volume-Up’ and ‘Home’ keys pressed while powering on the device, to directly enter recovery."
Thanks so much for the help. Ascallop: I tried to run Heimdall suite 1.3.1. The first time the drivers installed but I could not get passed the "run as administrator" on the next step. I have Windows XP professional even though I am on a home computer. It is automatically checked off to do so. When I tried again later that day, my computer again only recognized the vibrant as an unknown device. I just followed your link to Cyanogenmod's wiki and downloaded the older version and the same thing happened with the unknown device. I can't get passed that. Trailblazerz11, I think when I got to clockwork mod recovery, I hit repartition (if I am explaining that right). I was able to get into download mode and use Odin to get to the bootloader loop. I can't get into recovery. I was getting the message about the internal sd error. Now, I am stuck with the unknown device issue. I have tried a couple of different versions of Odin, the AIO toolbox, different usb ports, a new samsung cord, etc. Thanks again for helping this noob.
update: Used heimdall frontloader and installed cmenard overstock. Now I am stuck at the overstock screen. I am searching through different posts to find out more. But if you have any advice or can point me in the right direction, I'd appreciate it. Thanks again.
Have you tried repartition on odin?
sent from the xda app on my android smartphone.
Do you have an external SD card installed? If so, then remove it during the entire recovery process. I had lots of trouble recovering and flashing new kernels/roms while it was installed. Probably should have mentioned this earlier... sry.
No. It was already taken out. I am having trouble still with the vibrant not being recognized. I used the zadig, it recognized the samsung, did the next step, frozen at overstock screen. Now, after unplugging cable, Vibrant pops up as unknown device. Can't do zadig again.
I'm travelling until Friday, when I get back to my home PC, I'll odin my Vibrant back to stock Eclair and will list the steps that I took some months ago to install CWM/CM7. I once was at the same point as you are now, I just can't remember the steps verbatim regarding the recovery process. One question though: have you updated your phone via Kies at any point? If so, was the last update to Froyo?
BTW, I'm currently running (quite happily) ICS Passion V12 on my T-Mobile Vibrant.
The Vibrant is a pretty hard device to truly brick. Don't worry too much, yet.
Thanks so much ascallop! I think I tried Kies when froyo was offered as an update through Samsung. But, it wouldn't work. I thought it was because my phone came unlocked so I came here and was able to update to froyo and I loved it. I haven't used Kies since. The ICS Passion looks awesome. I think the ease of using froyo made me ridiculously overconfident. As of right now, I have gotten the drivers to download in Heimdall and used the frontend to flash the kernel. I'm not sure what to do next because it seems that if I reboot to get into download or unplug the usb, the computer won't recognize the phone again. I'm sure I'll be happily running ICS when you get back on Friday. Kidding, kidding.
nolamom said:
Thanks so much ascallop! I think I tried Kies when froyo was offered as an update through Samsung. But, it wouldn't work. I thought it was because my phone came unlocked so I came here and was able to update to froyo and I loved it. I haven't used Kies since. The ICS Passion looks awesome. I think the ease of using froyo made me ridiculously overconfident. As of right now, I have gotten the drivers to download in Heimdall and used the frontend to flash the kernel. I'm not sure what to do next because it seems that if I reboot to get into download or unplug the usb, the computer won't recognize the phone again. I'm sure I'll be happily running ICS when you get back on Friday. Kidding, kidding.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=13132341#post13132341
Let's get your phone back to Stock first. I just did this to my own Vibrant
I am officially back to stock!!! Thanks so, so much. After all of the reading and researching, you actually jumpstarted my recovery! Thanks again!!!
You're welcome
BTW, I flashed ICS V12r1 with Nelson's new kernel today. I love it. GPS works great for me, although others have reported problems. Same old deep sleep issue for them.
I wonder if flashing back to stock first is the key to fixing the prob. Don't really know though...
After the stock flash, the steps I took were:
copied kernel and rom to the internal sd card
One-click rooted the phone
odin (1.3) the Overstock kernel just to get cwm installed (instructions on the cm7 wiki)
reboot to cwm
wipe data/factory reset
wipe cache/dalvik
flash rom
reboot, let settle
reboot to cwm
flash kernel (I used: ICS_Passion_sunset_with_nova)
reboot, let settle
---------- Post added at 05:29 PM ---------- Previous post was at 05:24 PM ----------
One more thing: I flashed the Gingerbread bootloader as well. After you do this the key combo for cwm is: Vol-up + power. Let go when you see the boot splash.
Sounds sweet! Although I'm back to stock, I can't root because I can't access the internal drive. A message comes up about E: no such file, etc. I can see the phone storage memory amount and the phone holds data. I don't have an external card in right now. So, here I go again....
You shouldn't need an external card to root. Try One click root:
http://forum.xda-developers.com/showthread.php?t=1125414
nolamom said:
Sounds sweet! Although I'm back to stock, I can't root because I can't access the internal drive. A message comes up about E: no such file, etc. I can see the phone storage memory amount and the phone holds data. I don't have an external card in right now. So, here I go again....
Click to expand...
Click to collapse
When I've seen that E: error, it has been because of a mismatch between the CWM version and the filesystem layout on the device. CWM for CM7 doesn't work for ICS, for example. At least not for me.
---------- Post added at 10:24 AM ---------- Previous post was at 10:22 AM ----------
cashmundy said:
When I've seen that E: error, it has been because of a mismatch between the CWM version and the filesystem layout on the device. CWM for CM7 doesn't work for ICS, for example. At least not for me.
Click to expand...
Click to collapse
And of course the stock recovery won't work with anything else. Different partitioning, different filesystems.
Okay. I was able to root with the one click root app. Now, I need to figure out what to do next. Ascallop, I was reading about your latest updates. I have to go through it a few times so that I can understand it all. I had froyo before and it blew away stock. I can't imagine what ICS is like Thanks again for all of the help. I HATE being back to stock.
The only reason I'm not running ICS is that I'm waiting for CyanogenMod permissions management to appear in anyone ICS rom. I'm really tempted to try Passion. ICS is markedly better than the best GB in various ways. Just remember to take a nandroid backup before upgrading, and that if something doesn't work and you need to downgrade, you will have to get the downgrade done successfully before you can nandroid-restore. Good luck!
Thanks Cashmundy. I saw the video for the root and install ice cream sandwich by Eddie West (I think that is his name.) He is a dj also. It looks like everything I would need so I may go with that.
I recently installed the nightly build of ICS on my samsung vibrant. Today the phone had a error that said encryption cannot be completed phone must be erased. I let it do a factory reset . Then I got stuck in a endless boot cycle showing the vibrant logo and then the cynogen guy for a few seconds then reboot. I could still access the recovery menu but it refused to flash any roms I threw at it. I downloaded and ran odin 1 click recovery and it changed my tmobile phone to a att phone. And it lost the recovery mode. It just shows att screen first then samsung vibrant second and just reboots. I can still get into download mode and flash roms using odin 3 but no matter what rom I select or if I choose repartion or not the flash will go through successfully but then the phone reboots into same problem as before. I suspect the recovery files are gone since no button combination anymore gets me into recovery. Is there anything else I can do?
Man I am having the exact same problem. I really hope someone can figure something out soon. Did yours randomly get that error? Or did you actually try to encrypt your phone?
Sounds like you used the wrong Odin 1 Click. If it installed Captivate bootloaders, that would cause a problem.
This is your best shot I think
http://forum.xda-developers.com/showthread.php?p=24418319
Sent from my A500 using Tapatalk 2
It just happened
It happened on its own. Was working fine all day walked in my house as as soon as it hit wifi it started going crazy. I had the data plan turned off months ago. Maybe theres something to it connecting up to the net. I have found out if you install your sim you get a reduced menu of recovery options but without sim it just constantly reboots. it only gives option of reboot, reinstall packages,delete all user data, delete cache data. If you try reinstalling the packages theres nothing there. Deleting caches made no differance. ADB does work and responds while in this lesser form of recovery is there a easy way to use adb to force a full system flash?
Thanks
That link was perfect had a link to eugenes no brick froyo rom which fixed my problem. Dloaded that used its pit and tar files and repartioned and im back to stock. Going back to team whiskeys mod. If all ICS roms has bugs like that is unusable.
bfranklin1986 said:
This is your best shot I think
http://forum.xda-developers.com/showthread.php?p=24418319
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
Do you have access to BOTH your internal and external SD cards? The Encryption Bug is totally and completely random and does not discriminate. There is currently no known reason or solution. Several of us across a few different devices have been working on this for months.
Consider yourself luck if you have access to both SDs as you are the 2nd person to get in and out today. Many, many others have not been as fortunate.
If you could please pull up this thread and put as much information in there as possible, it would be greatly appreciated. Are you unlocked, what happened right before, what bootloaders are you on, what ROM were you trying to flash, what ROM did you end up getting booted,....those types of things. As much detail as you can muster together, after you catch your breath and relax a minute.
Guys DO NOT run ICS unless you have read up on the Encryption Unsuccessful bug and except the possible consequences! Every ICS T959 rom should have a warning IMO.
There is no known fix > just a work around. Odin / Heimdall / Jtag = useless
Update
I think I might have pulled the trigger to quick. While the link above did give me Eugenes rom which at least got me out of the boot cycle both internal and external sd shows 0 and I am unable to load anything on either card. I have tried differant microsd cards all of them show the same thing. So eugenes rom got me working kind of but cant store anything at all. That sucks loved my vibrant and its almost out of contract and planned on using on prepay.
Agreed 100 %
Had I of known would of stuck around on my team whiskey rom which never gave me any problems. Does this ICS bug affect amazon kindles? Ive put cynogen9 on 2 of them and am wondering if I shouldnt take it off before they turn into paper weights.
Moped_Ryder said:
Guys DO NOT run ICS unless you have read up on the Encryption Unsuccessful bug and except the possible consequences! Every ICS T959 rom should have a warning IMO.
There is no known fix > just a work around. Odin / Heimdall / Jtag = useless
Click to expand...
Click to collapse
chickenmon said:
Had I of known would of stuck around on my team whiskey rom which never gave me any problems. Does this ICS bug affect amazon kindles? Ive put cynogen9 on 2 of them and am wondering if I shouldnt take it off before they turn into paper weights.
Click to expand...
Click to collapse
I got tagged on a Nook Color with it. BUT, since the Nook Color has a feature that no others I think do (you can boot a ROM straight from an SD card and not mess with the oringinal OS at all), I was able to just pull my Microsd out and reformat it and then put CM7 on it for my wife.
So far from what I have seen and been working on:
Vibrant, Captivate, My wife's Nook Color, A few Transformers, SGSII,...
Anything I can do?
Anything I can do to get my partions right again? I can flash the twm 5.2.2 but none of the roms i throw at it including ics passion stays in a boot cycle. Only rom that works is eugenes froyo that does not brick and it doesnt allow internal or external mem to be seen.
chickenmon said:
... Only rom that works is eugenes froyo that does not brick and it doesnt allow internal or external mem to be seen.
Click to expand...
Click to collapse
You may want to bring up this issue directly in Merio90's thread. I believe Alex9090 went thru possibly similar issues and may be able to help you in that thread (unless she happens to pop in here).
I'm assuming you were trying to mount sdcard and emmc within recovery first (storage and mounts)? If you do have access to recovery again and can mount the external sdcard, maybe try repartitioning the card within recovery (using the parameters in Merio90's instructions)? Then transfer your rom zip and re-flash.
People have actually flashed Eugene's Froyo post-EU ... but without an ext sdcard. Quite an oddity. It's the only one (AFAIK) that'll fully boot up (even after losing int sdcard access due to EU) yet without an external sdcard in place.
Your assumptions are correct. I cannot mount emmc. I cannot flash any rom via 2.5 or 5.2 recovery only through odin and only eugenes rom still allows phone to boot but no mounting of internal or external sds. Ive spent about 3 days on this. There must be some hardcore adb commands to force a true factory reset partioning and all. Very annoying. Thanks for the help if I find any ways to fix it I will repost it here.
Might be bricked?
Ok, i will admit up front that I probably did something stupid and now am sending out a cry for help. Until yesterday I had ICS 4.0.3 successfully installed. I believe it was Euphoria flavor. But, I constantly had shortage of memory problems with the new force close language on apps running in bg - was laggy. Here is where it all went wrong - Decided to dl and install CM9 nightly to fix my laggy install. Recovery went fine, but rom failed, rebooted and sent error to cm. Tried new tactic - dl and installed Slim ICS - wrong, got stuck in boot loop - but could still get into download mode. Ran Odin to restore to stock. Ran fine but Failed - no explanation, just failed. Since it would not respond, finally turned it off - OFF has now become permanent! Power button does nothing. Charging does not light up screen. No download or recovery mode! Really fearful that this IS bad. Help, help, help!!
Open to suggestion. . .
JIM in FLA
Not related at all to my original problem.
tenantrep said:
Ok, i will admit up front that I probably did something stupid and now am sending out a cry for help. Until yesterday I had ICS 4.0.3 successfully installed. I believe it was Euphoria flavor. But, I constantly had shortage of memory problems with the new force close language on apps running in bg - was laggy. Here is where it all went wrong - Decided to dl and install CM9 nightly to fix my laggy install. Recovery went fine, but rom failed, rebooted and sent error to cm. Tried new tactic - dl and installed Slim ICS - wrong, got stuck in boot loop - but could still get into download mode. Ran Odin to restore to stock. Ran fine but Failed - no explanation, just failed. Since it would not respond, finally turned it off - OFF has now become permanent! Power button does nothing. Charging does not light up screen. No download or recovery mode! Really fearful that this IS bad. Help, help, help!!
Open to suggestion. . .
JIM in FLA
Click to expand...
Click to collapse
First of all, not to sound like a ****; but it's rude to hijack someone elses thread. You should've created your own thread for this.
Second; you might have fried your bootloader which in turn, yeah, that's bad and you might have bricked your phone.
Did you try to boot into recovery via the battery pull method. If not, try that and see how it works. I would link you to the instructions but I'm too lazy and tired right now to search for it and again, this is someone else's thread. Just do a search for it and you should find it.
If you need more help or guidance, create your own thread and start there.
Noticed your running Ice Cream Zenwich rc1.3. How do you like it. Ive installed slim 3 times today and twice I have gotten the encryption error within a hour. Needless to say not impressed major pain in the ass to have to do a million and half tricks with awm, adb, popping sd cards in and out etc.
Update
Also the current build of ics slim does not allow the imei information to be retrieved from sim for tmobile requiring a reflash of the modem. You have to download and install a new modem. I used csm5. The guide on the link in this post dow work but its a real pain and requires lots of trial and error. Wondering if google intentionally bricking these things knowing we all got gadget lust for the sIII now.
chickenmon said:
Noticed your running Ice Cream Zenwich rc1.3. How do you like it ...
Click to expand...
Click to collapse
ICZen_rc1.8.3 (AOKP #39, ICS 4.0.4) + subZero #144 (New Test Kernel just released in mr_pyscho's RootzWiki kernel thread) is Linaro infused ... and I've got to say the combo is THE fastest rom experience I've ever had on my Vibe. Whatever MP did in his new test kernel just blows the doors off the previous performance limits.
Btw .. you keep encountering EU again. Really odd unless possibly your external card wasn't partitioned correctly. Not a knock directly on you, but it is a common occurrence lately. FYI, I repartitioned mine directly from recovery.
Also ... Br1cK'd (ICZen) and mr_psycho (subZero) are aware of the EU situation and try to include safeguards in their builds. However, until we know the exact root cause of EU, we're all just shooting in the dark. Imo, it's at least comforting to use a rom & kernel where the dev's are at least mindful of EU.