Inspired by the case in the link below, I am on a quest to make a case. If anyone wants to make some with me, let's talk. If someone is interested in doing a rugged metal/rubber/Plexiglas case for their note, and has some tools to help (like a CNC router) we can both put in work on different parts and get some nice cases. (Such as, I powder coat them and make the rubber inserts, and you machine the aluminum blocks. We both pay equal prices for the parts, but labor is free because we both contribute to it) that is just an example, let's talk or give me advice please! Here is the post that I made before:
Orange_furball said:
Yes. I'm considering asking someone how much it would be to rout a case from aluminum (unless I can do it with a dremel?) And then make some sort of mold for a rubber insert. I can also get a Plexiglas front cover cut (its not guerilla glass, but it'll do and is cheaper to replace) I can get the aluminum decently cheap (by the pound) and if I get some routing bits I'm sure I can figure it out. The hardest part is the machining of the aluminum and the molding of the rubber.
As for paining, I can get it power coated (lasts about 10 years!) For a few bucks.
Anyone have any ideas? The only thing in concerned about is the headphone plug cover, but that can be otter box style rubber, as long as the outside is metal
Does anyone know how to mold rubber? Or would I be better off buying a silicone case and making a two piece aluminum shell, 4 screws on it in each corner and the plexi screen protector sandwich in between. Also a camera/flash protector of some sort.
So here is what I need to know:
1)How to make the speaker waterproof
2) how to mold silicone/rubber for a custom phone case
3) how to machine aluminum with average tools (no workshop available unfortunately)
4) how to do the machining and molding cheaply
5) design for the spen area. I don't see an easy way to plug that to make the case water resistant
6) antenna issues...
sent from a phone or tablet using an app.
Click to expand...
Click to collapse
Original post:
http://www.geeky-gadgets.com/lunatik-taktik-shockproof-rugged-iphone-case-video-22-06-2012/
Gah. Saw this on macrumors and fell in love. Is there anything like this for the galaxy note?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Orange_furball said:
http://www.geeky-gadgets.com/lunatik-taktik-shockproof-rugged-iphone-case-video-22-06-2012/
Gah. Saw this on macrumors and fell in love. Is there anything like this for the galaxy note?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I don't know of anything like that for the Note. But if you do find anything, please post it in this thread! That thing looks awesome!
It looks like its not even availble for the iphone yet. The case is a kickstarter project.
Sent from my SAMSUNG-SGH-I717 using xda premium
I like this one https://www.mophie.com/juice-pack-PRO-Rugged-case-for-iPhone-4-4S-p/2120_jppr-ip4-blk.htm
The gf loves it, and temps me all the time to switching my Galaxy Note to an iPhone 4s...
Nothing like that will ever come to Android. Sad.
This is really sad. If I had access to a cnc router, I would make a few metal shells and mold some rubber inserts. I want a rugged case, but not like the otter box. Something that is actually high quality. I mean metal, rubber, and guerrilla glass! For $25 (I think) more than the otter box defender!
I am always jealous of the cases for the iPhone. I can't find any that make me happy, so I *carefully* use my phone naked.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Ray Dx said:
Here
Click to expand...
Click to collapse
None of those are metal...
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
The note would be monstrous with that. It makes the iPhone look bigger than the Note. What the hell do you need that much protection for? Phone insurance and a tpu case is all anybody should ever need
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
welchertc said:
The note would be monstrous with that. It makes the iPhone look bigger than the Note. What the hell do you need that much protection for? Phone insurance and a tpu case is all anybody should ever need
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I don't have insurance. I just forgot to get it and honestly it seems like a rip off. I used it on my old Garmin Nuvifone G60 once but that was because I dropped it out of my second story window by accident (long story) every phone after that has never had insurance. I wanted it for the note, but I have been going strong since march 19th and its still in one piece
But with an awesome case like that I can throw my phone at the ground for no reason and not break it!
Sent from my SAMSUNG-SGH-I717 using an app that has forums and such
Finally a reason to want an iphone!
Only design flaw I see is the internal electronics.
Chief Geek said:
Finally a reason to want an iphone!
Only design flaw I see is the internal electronics.
Click to expand...
Click to collapse
And the software...
sent from a phone or tablet using an app.
The only thing I am truly envious about in regards to apple products is the mind blowing assortment of accessories. :/ Darn. I would definitely invest in this even though I have insurance on my phone, it still is a pain.
But back to your needs, you want a metal phone case? Otterbox seems similar but do you not like the rubber/plastic aspect of it?
Ph0n3D0rk said:
The only thing I am truly envious about in regards to apple products is the mind blowing assortment of accessories. :/ Darn. I would definitely invest in this even though I have insurance on my phone, it still is a pain.
But back to your needs, you want a metal phone case? Otterbox seems similar but do you not like the rubber/plastic aspect of it?
Click to expand...
Click to collapse
Yes. I'm considering asking someone how much it would be to rout a case from aluminum (unless I can do it with a dremel?) And then make some sort of mold for a rubber insert. I can also get a Plexiglas front cover cut (its not guerilla glass, but it'll do and is cheaper to replace) I can get the aluminum decently cheap (by the pound) and if I get some routing bits I'm sure I can figure it out. The hardest part is the machining of the aluminum and the molding of the rubber.
As for paining, I can get it power coated (lasts about 10 years!) For a few bucks.
Anyone have any ideas? The only thing in concerned about is the headphone plug cover, but that can be otter box style rubber, as long as the outside is metal
Does anyone know how to mold rubber? Or would I be better off buying a silicone case and making a two piece aluminum shell, 4 screws on it in each corner and the plexi screen protector sandwich in between. Also a camera/flash protector of some sort.
So here is what I need to know:
1)How to make the speaker waterproof
2) how to mold silicone/rubber for a custom phone case
3) how to machine aluminum with average tools (no workshop available unfortunately)
4) how to do the machining and molding cheaply
5) design for the spen area. I don't see an easy way to plug that to make the case water resistant
6) antenna issues...
sent from a phone or tablet using an app.
Anyone have advice?
sent from a phone or tablet using an app.
Just trying to be realistic here. I don't think you will be able to create such a case yourself since you barely have a clue on where to start.
Just look at your list:
Orange_furball said:
So here is what I need to know:
1)How to make the speaker waterproof
2) how to mold silicone/rubber for a custom phone case
3) how to machine aluminum with average tools (no workshop available unfortunately)
4) how to do the machining and molding cheaply
5) design for the spen area. I don't see an easy way to plug that to make the case water resistant
6) antenna issues...
Click to expand...
Click to collapse
You're basically asking us how to do the whole thing.
fbauto1 said:
Just trying to be realistic here. I don't think you will be able to create such a case yourself since you barely have a clue on where to start.
Just look at your list:
You're basically asking us how to do the whole thing.
Click to expand...
Click to collapse
I'm asking for advice. I can do it, but it might not be the best way. Except the antenna issues. I'm clueless on that
sent from a phone or tablet using an app.
Orange_furball said:
I'm asking for advice. I can do it, but it might not be the best way. Except the antenna issues. I'm clueless on that
sent from a phone or tablet using an app.
Click to expand...
Click to collapse
This one is pretty sweet.
http://www.sweet-armor.com/6-sweet-armor-gnote
If you can use a CNC machine you're welcome. I might try to make one of these for a final in my CNC classes in the fall.
iStatiK said:
This one is pretty sweet.
http://www.sweet-armor.com/6-sweet-armor-gnote
If you can use a CNC machine you're welcome. I might try to make one of these for a final in my CNC classes in the fall.
Click to expand...
Click to collapse
I love love love bumpers. But they don't offer enough protection IMHO. But wow. Those are really nice finishes
sent from a phone or tablet using an app.
They do look quite nice. Protection for what the screen?
Sent from my SAMSUNG-SGH-I717 using xda premium
iStatiK said:
They do look quite nice. Protection for what the screen?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
And back
sent from a phone or tablet using an app. :shocked:
Orange_furball said:
I'm asking for advice. I can do it, but it might not be the best way. Except the antenna issues. I'm clueless on that
sent from a phone or tablet using an app.
Click to expand...
Click to collapse
That is an awesome looking case. BUT making it out of aluminum rather than plastic? Aside from the weight, folks report signal loss with bumpers let alone a full metal enclosure. It would be the equivalent of a Faraday cage.
ASUS goofed with the Transformer Prime's completely aluminum case which caused more than a few issues with GPS. The higher resolution follow up model fixes this with an ugly plastic section across the top.
Apple fwiw, mostly accounted for their iPhone's metal case by placing antenna(s) behind the non-metallic logo.
My other suggestion would be to do a mock up just to get a sense of the size and practicality of a case this size - draw it up and cut it out of wood.
Definitely following this thread. I love this kind of stuff.
From my DAGr8 AOKP Powered Note
Related
For me this is the best good looking case for HTC EVO 3D....
http://www.ebay.com/itm/280787768328?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Enjoy...
I actually think thats kinda hot. You got any pictures of it on your phone?
Dude. That is NICE. Did you pick it up? I hate ordering outside the country though.
Sent from my PG86100 using xda premium
Yeah that is really nice looking but shipping and time is kinda lame. Looking for somewhere else to order this but cant seem to find anything in NA. If someone can find this i bet a lot of people would be interested...
all retailers for this particular case are located in China unfortunately. One of the other two offered a slightly cheaper price but you pay for shipping and it comes out to be about the same as the one from ebay in terms of shipping length and total price. The only difference is you can choose faster shipping but it costs more than the case itself which essentially is pointless. The other retailer sells them in bulk.
http://www.dpgate.com/Carbon-Fiber-...-Case-Cover-for-HTC-EVO-3D---Black_p1558.html
Cordy said:
all retailers for this particular case are located in China unfortunately. One of the other two offered a slightly cheaper price but you pay for shipping and it comes out to be about the same as the one from ebay in terms of shipping length and total price. The only difference is you can choose faster shipping but it costs more than the case itself which essentially is pointless. The other retailer sells them in bulk.
http://www.dpgate.com/Carbon-Fiber-...-Case-Cover-for-HTC-EVO-3D---Black_p1558.html
Click to expand...
Click to collapse
I saw 4 others linked on Ebay (all China) for $7.50 with free s/h. I might be interested in it, I've had good luck with China cases.
http://shop.mobileweb.ebay.com/searchresults?kw=Evo+3d+carbon+fiber+chrome&x=22&y=4&cmd=SKW
Sent from my PG86100 using xda premium
KB112 said:
I saw 4 others linked on Ebay (all China) for $7.50 with free s/h. I might be interested in it, I've had good luck with China cases.
http://shop.mobileweb.ebay.com/searchresults?kw=Evo+3d+carbon+fiber+chrome&x=22&y=4&cmd=SKW
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
The case looks like a tpu case . Looks nice tho.
anyone have more pics? or have things to say about this case?
That's the nicest case I've seen yet!
Sent from my PG86100 using XDA App
twe90kid said:
anyone have more pics? or have things to say about this case?
Click to expand...
Click to collapse
I also would like to hear more on this one, reviews, anything? Looks super nice from pics
Ordered this since I was curious. Will let you guys know
Sent from my PG86100 using XDA App
Looks very nice from pics
i'm a case whore so.........subscribed! please let us know how the case is.
Just got the case in, I'll post pictures later tonight but here are my initial views and opinions:
lightweight, plastic, sturdy. Feels good in hand, thin, not made of the greatest materials but for 6 bucks who can argue. The carbon fiber feel on the back seems all good and fine but thats really about it. Feels more like those skins you can buy online as well.
The cut outs of the case seem to be in all the right places not disturbing the functions of the phone. Although I noticed sliding the 2D to 3D button to be a bit troublesome (not a bad deal for me since I rarely use this), and the volume rocker seems like it needs to be pressed with the very tip of your fingers (this one can get somewhat annoying I can forsee).
This case covers the back well, also covering the camera (of course not covering the lenses, speaker, and LED flash). The case on the sides extend far enough so that the buttons that would usually protrude without a case are protected with this case on. The front however is not well protected, usually a case would somewhat add enough to the front as to not let the glass screen of the phone touch the object you set it on. The problem here is, apart from the screen, the front of the phone is in danger of being scratched.
What this case tries to add is style with a slim feature, although the case adds no added protection whatsoever from drops or aggressive scratches this case is more for people who just like to add a bit of zing to their phone. Another problem though is that this case has no felt or soft covering the inside of the case. The problem here is that if dirt, sand, or anything coarse gets in there it can cause scratches. To add to that also, the case is hard to take off (maybe its just me but I didn't want to force it off). I've had some cases scratch my phone when trying to remove them and I can see this case adding to that as well. I would rate this case a 5 out of 10. 5 for the style, design, and feel but a minus 5 due to the lack of protection, possible scratching, and annoyances of some parts of the case.
**This review is just MY personal opinion and should be taken as just that, an opinion. For 6 bucks you can't go wrong but at least now I have provided you with my own personal feedback to get your brain cells tingling.
fsalazar504 said:
Just got the case in, I'll post pictures later tonight but here are my initial views and opinions:
lightweight, plastic, sturdy. Feels good in hand, thin, not made of the greatest materials but for 6 bucks who can argue. The carbon fiber feel on the back seems all good and fine but thats really about it. Feels more like those skins you can buy online as well.
The cut outs of the case seem to be in all the right places not disturbing the functions of the phone. Although I noticed sliding the 2D to 3D button to be a bit troublesome (not a bad deal for me since I rarely use this), and the volume rocker seems like it needs to be pressed with the very tip of your fingers (this one can get somewhat annoying I can forsee).
This case covers the back well, also covering the camera (of course not covering the lenses, speaker, and LED flash). The case on the sides extend far enough so that the buttons that would usually protrude without a case are protected with this case on. The front however is not well protected, usually a case would somewhat add enough to the front as to not let the glass screen of the phone touch the object you set it on. The problem here is, apart from the screen, the front of the phone is in danger of being scratched.
What this case tries to add is style with a slim feature, although the case adds no added protection whatsoever from drops or aggressive scratches this case is more for people who just like to add a bit of zing to their phone. Another problem though is that this case has felt or soft covering the inside of the case. The problem here is that if dirt, sand, or anything coarse gets in there it can cause scratches. To add to that also, the case is hard to take off (maybe its just me but I didn't want to force it off). I've had some cases scratch my phone when trying to remove them and I can see this case adding to that as well. I would rate this case a 5 out of 10. 5 for the style, design, and feel but a minus 5 due to the lack of protection, possible scratching, and annoyances of some parts of the case.
**This review is just MY personal opinion and should be taken as just that, an opinion. For 6 bucks you can't go wrong but at least now I have provided you with my own personal feedback to get your brain cells tingling.
Click to expand...
Click to collapse
Thanks, looks like it does nothing to protect the front of the phone.
dteze88 said:
Thanks, looks like it does nothing to protect the front of the phone.
Click to expand...
Click to collapse
It doesn't, from the posted review it seems like you would be better off just applying a carbon fiber cover/sticker to the phone.
dteze88 said:
Thanks, looks like it does nothing to protect the front of the phone.
Click to expand...
Click to collapse
Sent from my HTC EVO 3D using XDA App
Yeah no front protection whatsoever. Pretty much more for looks I'd say
I got one today and its exactly what fsalazar said. Nothing to add or correct. No front protection at all... However, I've noticed that pulling the case off is easier if you've done it a few times and (for me) the easiest way to get it off is by pulling (quite hard) at the bottom.
Sent from my HTC EVO 3D X515m using xda premium
Ya I agree I was just scared of it scratching my phone. Ill try your method and see lol. Oh yeah and ill post pictures soon!
Sent from my HTC EVO 3D using XDA App
Has anyone seen a replacement cover for that ugly glossy black part? I'd love to replace that with a better looking piece of plastic.
I doubt there will ever be one. Unless you can talk joey3002 into making some again, but I think he's done with the covers.
You should wait and see what the phone looks like in person.
I was just gonna take it off and go at it with 800 or 1000 grit wet and take off the gloss
Sent from my cm_tenderloin using Tapatalk
dozybolox13 said:
Has anyone seen a replacement cover for that ugly glossy black part? I'd love to replace that with a better looking piece of plastic.
Click to expand...
Click to collapse
I agree 100%. I don't want to put a case on my EVO but definetly need to replace that ugly glossy black part. HTC should just have kept it matte black.
I'm going with an otterbox defender. I need a heavy duty case though. Have had an otterbox on my Eco 4 G since week two after it launched. Quality case.
I would pay $$$ to get one in CF..
Will
lacrossev said:
I was just gonna take it off and go at it with 800 or 1000 grit wet and take off the gloss
Sent from my cm_tenderloin using Tapatalk
Click to expand...
Click to collapse
I want to do the same, but it looks like the camera lens part of it is going to be a PITA. Hopefully there will be third party covers available that will match the bottom half of the back.
URABUS0924 said:
I want to do the same, but it looks like the camera lens part of it is going to be a PITA.
Click to expand...
Click to collapse
That's what painters tape is for. If that cover is cheap enough to replace (in the unlikely event that I screw it up), I'll be going this route.
shellguy said:
I would pay $$$ to get one in CF..
Will
Click to expand...
Click to collapse
If the reason why that piece of the phone is plastic is due to the antenna placement, then replacing it with a cf piece may cause some signal attenuation as CF works as RF shielding for some applications, as i've read from RC model airplane forums where people discuss when and where to use CF in their planes.
also, NFC does not work without that specific cover in place. There are antennas and whatnot built into the thing. watch Phil Nickinsons quick walkthrough video on android central to see what I mean. he said that nfc definitely doesnt work without the cover on.
How about some carbon fiber vinyl wrap? It's not actual carbon so it shouldn't block anything right?
http://www.amazon.com/Black-Metro-Flexible-Carbon-Fiber/dp/B005BTNFVQ
Varekai said:
How about some carbon fiber vinyl wrap? It's not actual carbon so it shouldn't block anything right?
http://www.amazon.com/Black-Metro-Flexible-Carbon-Fiber/dp/B005BTNFVQ
Click to expand...
Click to collapse
Eh the issue that you will have is making sure that it is cut correctly.
Will
thats what that xo skins cf-look skin looks like. 3m di-noc would work pretty well as its thin enough to wrap around some basic curvatures like the one we have for the back cover. I've seen it wrapped around some crazy shapes without additional relief cuts or anything so it would be a good place to start if you don't want to pay the 15 bucks for a few pieces of that material pre-cut for the phone.
I have 2 small rolls of the CF Di-Noc in both silver and black. Will upload pics as soon as I can get it laid down. Now to decided which color.
Sent from my Nexus S 4G using xda premium
Like many others, the top of the Evo 4G LTE is a major detractor. When looking for a way to fix this I came across this where they sanded the polycarbonate of the glossy iPhone to give it a brushed look. I'm curious as to how well something similar (using circles insteads of lines to make it matte but not brushed) would work well with the top of the Evo 4G LTE. What makes this worse is that in the video HTC published you can see a prototype with matte plastic and it looks tremendously better.
Gonna check out this link when i get on my pc. But sounds like a pretty good idea. Back when I had an ipod touch I hated the mirror backs because of how scratched up they got so i sanded it to look like stainless steel. Worked out perfect.
Although I don't like the shiny plastic look its not so bad I think I can live with it but if this ends up working good with the EVO maybe ill give it a shot but I don't think ill be the guinea pig haha
Sent from my PG86100 using xda premium
njgtechguy said:
Like many others, the top of the Evo 4G LTE is a major detractor. When looking for a way to fix this I came across hxxp://basejewellery.com/media/iphone/17.jpg (I haven't posted enough to allow links) where they sanded the polycarbonate of the glossy iPhone to give it a brushed look. I'm curious as to how well something similar (using circles insteads of lines to make it matte but not brushed) would work well with the top of the Evo 4G LTE. What makes this worse is that in the video HTC published you can see a prototype with matte plastic and it looks tremendously better.
Click to expand...
Click to collapse
Yes it also broke my heart to see that prototype, I was like..WHYYYYYYYYY!!!!
with the obvious disliking of that piece i'm sure there will be 3rd party replacements since it is supposedly easily removable
Rodderik said:
with the obvious disliking of that piece i'm sure there will be 3rd party replacements since it is supposedly easily removable
Click to expand...
Click to collapse
I thought so to but it does house the nfc chip so if anyone does make one it probably won't be cheap
Sent from my PG86100 using xda premium
It's not the NFC chip but just the antenna so third parties should be able to make a replacement part. The area near the lens worries me a bit though. Unless it looks better in person I think I will sand it.
Thanks for posting this. I was already planning to do this but now I have some instructions. For anyone who doesn't want to read the external posts, the process should go something like this:
1. Remove the shiny plastic back-cover
2. Acquire two small pieces of sand paper (one 800 grit and one 1200 grit)
3. Start by wet-sanding with the 800 grit sandpaper (use a forward-back motion)
4. Clean, inspect, and continue sanding until all shiny spots are gone
5. After you've gotten to all the tricky spots, let it dry, clean again with a soft cloth, and check out the results. This will produce a very dull finish.
5. If you would prefer a more polished finish, switch to the 1200 grit sandpaper and carefully re-sand the entire surface
6. Post pictures on xda.
I'm sure there will be third parties making backings. It'd be an easy way to make money too, if anyone is keeping track of this idea. I for one love the two-toned look.
I despise the two-tone look. I wish I'd never seen the AT&T One X in white. makes me hate the looks of the back of this phone that much more. If I get one, I'll be doing this or painting the back or something to make it look better.
If anyone is experienced with sanding, is the 800 anf then 1200 grit approach appropriate?
njgtechguy said:
If anyone is experienced with sanding, is the 800 anf then 1200 grit approach appropriate?
Click to expand...
Click to collapse
Yes, coarse paper first (800) then the finer paper (1200), I would test it out first. and don't forget this should be a wet sand with water as a lubricant.
I wanted to put in a request to Seidio to make some in a limited quantity but:
1. I wonder if they'll follow through?
2. Will it kill the signal advantage of the OEM's door?
3. Will it dissapoint (Still glossy, Loud, LOGO plastered, Weird etc.)?
That back peice is also part of my reasoning for wanting a white one.
i wonder if the plastic is a coated red like the original evo.
i thought it was neat with the original evo, you could sand to reveal red.
the back doesnt bother me, it'll be covered with a casing anyways.
lol
i could care less
cuz as soon as i get it im slapping a nice case on it
people just love to moan for nothing
flex360 said:
lol
i could care less
cuz as soon as i get it im slapping a nice case on it
people just love to moan for nothing
Click to expand...
Click to collapse
What about the people not putting a case on it, not that it bothers me but still some people don't wrap their phones up.
blkswanpres said:
What about the people not putting a case on it, not that it bothers me but still some people don't wrap their phones up.
Click to expand...
Click to collapse
This otherwise what's the point of putting a label on the.back
Sent from my PG86100 using xda premium
I usually skin my devices when I get em so my entire phone looks shiny like that lol. Hope to pick one up around Christmas
Sent from my SPH-D710 using xda premium
I don't understand why people would want to put cases on their phones. It's the same principle as buying an expensive couch and 'protecting' it with a plastic cover or buying an expensive car and then installing neoprene covers on the seats. This is an awesome, well built phone. It was designed to be used 'naked'. If it needed an additional layer of clothing, HTC would have designed it into the phone.
I feel that if people would just learn to take care of their phones, they could enjoy using them the way they were designed to be used.
Anyway... my 2 cents. You have a right to disagree and, if you buy the phone, it's yours to do with as you please. But, personally, I just can't stand to see a beautiful smart phone dressed in a purka (a phone burka).
I'm probably going to sand blast mine as soon as I get it. if its just polycarbonate it'll turn out nicely!
Just wait a month or so for the Chinese to make a nice top replace and post it on Ebay.
Just getting a feel for who would be interested in a case like this for our beloved eVo's? I'm currently in the design stages yet but open to suggestions on changes! Let me know what you guys think! Custom engraving on the back will be available in time....also color options are also still up in the air.
will most definitely take one if you get them produced. are you milling them out on a cnc?
Black and Im in.
Yes they will be machined on a cnc and will be produced by myself.
SteelH,
I'm a fan of black so most likely I will probably do the first run in black.
also here are pics of it in black.
Awesome, unique design man.
My only thing is, if it is dropped it appears the only contact the case has on the outer rim of the phone are the posts in each corner...
Would dropping on a corner or edge focus too much force through that small area and cause screen cracks, cosmetic damage to the phone itself?
Just an observation I had. Hope it helps!
I plan to use rubber corner posts to help prevent some damage to the phone hopefully!
I would probably get one. Any ideas on cost?
Those are pretty sweet.
Either black or a brushed aluminum and i'm totally in.
I haven't figured up a price yet....still need to get some quotes for anodizing.
Some kind of card slot for credit cards pin the back would be amazing! I'm really interested in this, you've got sat least one buyer
Sent from my EVO using xda app-developers app
if the price is right them im definitely in. curious, will it be straight aluminum or will the outside be a soft rubber almost like the back of the original evo? if not then i could always coat it in some platidip (basically liquid rubber spray paint) looks very nice on everything haha and it peels off.
curious tho, where did you get the dimensions from? did you measure them or is there a 3d cad model floating around of the evo it self. im currently in a cad class and would love to see what things i could stir up based off of a model wouldn't produce anything tho since the only way we have is a 3d printer that uses a brittle plastic
I second the suggestion to add card slots! maybe 2 or 3? I would DEFINITELY buy one if there were card slots. I have been searching for a case for our EVOLTE that has this feature.
jkt97401 said:
I second the suggestion to add card slots! maybe 2 or 3? I would DEFINITELY buy one if there were card slots. I have been searching for a case for our EVOLTE that has this feature.
Click to expand...
Click to collapse
Maybe if the back were two parts and there was a compartment for your cards. Sorry im excited to hear op's response and I'm getting carried away Haha
Sent from my EVO using xda app-developers app
mwedemeier11 said:
Maybe if the back were two parts and there was a compartment for your cards. Sorry im excited to hear op's response and I'm getting carried away Haha
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Don't be sorry! The OP asked for suggestions haha. I'm really happy to see this thread!
PhxkinMassacre said:
if the price is right them im definitely in. curious, will it be straight aluminum or will the outside be a soft rubber almost like the back of the original evo? if not then i could always coat it in some platidip (basically liquid rubber spray paint) looks very nice on everything haha and it peels off.
curious tho, where did you get the dimensions from? did you measure them or is there a 3d cad model floating around of the evo it self. im currently in a cad class and would love to see what things i could stir up based off of a model wouldn't produce anything tho since the only way we have is a 3d printer that uses a brittle plastic
Click to expand...
Click to collapse
I got the dimensions of my eVo just measured it up with my caliper!
As for the coating I have thought about getting some sort of liquid rubber to dip them in but would like to know what others think of this?
Also as for card slots I will try to come up with something after this work week as I will be on the road all week for work.
Keep the suggestions coming!!
Also just was thinking about the card slots......to do a card slot you would have to sacrifce the kickstand....If you guys are fine with that then I will put the time into designing one with a slot in it.
The other option would be to put a external kickstand on it but would require more designing and more money to build it.
Just some options to think about!
Won't this block the antennae? Cell reception is already weak enough on ltevo. I would think the entire plastic cover area would need to be either exposed or only covered with plastic or wood or glass.
Sent from my EVO using xda premium
KEYofR said:
Won't this block the antennae? Cell reception is already weak enough on ltevo. I would think the entire plastic cover area would need to be either exposed or only covered with plastic or wood or glass.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
i thought the radios were kinda attached in a way to the body and used the aluminum to get the reception, if im right (which i may not be) then this might actually help? or it may not. idk
Put me down as a maybe. Depending on price and how they look in real life. I like the model though.
So far Ive been using an otterbox commuter, however there is no otterbox that matches a pink device, the "berry" option and "lily" option are both pukishly horrid looking
The thing with that kind of case, and those of you who work in the kitchen know what Im talking about is the residue build up from heat/humidity that forms alongside the edges of the front of the phone no matter where you place it on you (at least with the commuters), making port covers very important.... as my N2 survived 6 weeks before having a faulty charge port without a port-covering case.
However, Ive had no such luck finding a conventional case that has port covers....thats not otterbox, I've seen some nice cases around these threads but its all up to port covering & drop protection because well....thats entire point of a case.
Hmm a girl who likes heavy duty and rugged cases.....
Pink is hard to match up with....but this is another case that is rugged, have a look!
http://www.casefanatic.com/samsung-...uty-3-layer-metal-anti-shock-drop-protection/
It's a mix of metal and plastic, with your port covers as well.
Sent from my fingers to your face using Tapatalk VIP on my Note 3 LTE!
Or you could have a try spray painting your case, it could work
Sent from my SM-N9005 using Tapatalk
nicholaschum said:
Hmm a girl who likes heavy duty and rugged cases.....
Pink is hard to match up with....but this is another case that is rugged, have a look!
http://www.casefanatic.com/samsung-...uty-3-layer-metal-anti-shock-drop-protection/
It's a mix of metal and plastic, with your port covers as well.
Sent from my fingers to your face using Tapatalk VIP on my Note 3 LTE!
Click to expand...
Click to collapse
That was one option I was looking at but shape isnt so....alluring.
nxneko said:
So far Ive been using an otterbox commuter, however there is no otterbox that matches a pink device, the "berry" option and "lily" option are both pukishly horrid looking
The thing with that kind of case, and those of you who work in the kitchen know what Im talking about is the residue build up from heat/humidity that forms alongside the edges of the front of the phone no matter where you place it on you (at least with the commuters), making port covers very important.... as my N2 survived 6 weeks before having a faulty charge port without a port-covering case.
However, Ive had no such luck finding a conventional case that has port covers....thats not otterbox, I've seen some nice cases around these threads but its all up to port covering & drop protection because well....thats entire point of a case.
Click to expand...
Click to collapse
No offense, but if I saw anyone in a kitchen with their phone out I would tell the manager that there was no way I was going to eat there.
#1. You are bringing glass on the line. Your phone breaks, you just screwed the entire line.
#2. Your phone is a bacteria magnet. If you touch your phone while you are cooking and you do not stop to wash your hands, you are potentially putting diners at risk.
#3. You are at work. Act like it. Leave your phone in the break room.
sodomanaz said:
No offense, but if I saw anyone in a kitchen with their phone out I would tell the manager that there was no way I was going to eat there.
#1. You are bringing glass on the line. Your phone breaks, you just screwed the entire line.
#2. Your phone is a bacteria magnet. If you touch your phone while you are cooking and you do not stop to wash your hands, you are potentially putting diners at risk.
#3. You are at work. Act like it. Leave your phone in the break room.
Click to expand...
Click to collapse
Thats silly, but obvious. I would never want to get flour or butter etc on the phone it never comes out of back pocket, theres already a no phones out except while on break rule anyways plus who has time when theyre making batches of desserts and breads, But humidity build up in kitchen is why im looking for such a case. There is no lockers in the bakery which I find odd but thats how it is.
Its just about protecting it from the added variables in a kitchen environment
Sent from my SM-N9005 using Tapatalk
nxneko said:
Thats silly, but obvious. I would never want to get flour or butter etc on the phone it never comes out of back pocket, theres already a no phones out except while on break rule anyways plus who has time when theyre making batches of desserts and breads, But humidity build up in kitchen is why im looking for such a case. There is no lockers in the bakery which I find odd but thats how it is.
Its just about protecting it from the added variables in a kitchen environment
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
It may be silly, but you definitely asked for an opinion from those of us who have worked in kitchens. I gave you mine.
Your phone should never be in the kitchen anyway. Leave it in your purse and problem solved. Beyond that, the Zerolemon rugged case offers decent protection (but is huge) or you can look on ebay for port plugs.
sodomanaz said:
It may be silly, but you definitely asked for an opinion from those of us who have worked in kitchens. I gave you mine.
Your phone should never be in the kitchen anyway. Leave it in your purse and problem solved. Beyond that, the Zerolemon rugged case offers decent protection (but is huge) or you can look on ebay for port plugs.
Click to expand...
Click to collapse
Cant bring purse.... I wish I could. There would be no place to keep it away from food or supplies. I was actually looking into that case but worried over bulk. It has to go in pocket behind chefs jacket behind apron at best.
I had emailed ZL over a purple case they had with the battery and they blew me off with a reply so ive been thinking twice
Sent from my SM-N9005 using Tapatalk