Related
just got it ,nice case
hard case
http://www.ebay.co.uk/itm/150754846...46512&_sacat=See-All-Categories&_fvi=1&_rdc=1
stand hard case
http://www.ebay.co.uk/itm/150717836...36523&_sacat=See-All-Categories&_fvi=1&_rdc=1
kpjimmy said:
The case is like the barely there cases with a slide out kickstand built in.
Putting on the case was like putting on the barely there case. Taking it off is the same. Now using the kickstand....well....it's a hit or miss. You can't really use it in portrait, and I am not sure it's supposed to be used that way. That's because the bottom is exposed so the curve of the phone makes it rock back and forth slightly. Now the beauty of this is the portrait mode. This works the best and most stable.
Click to expand...
Click to collapse
i will post more stand case pics
don't like the fact that the top and bottom of the phone isn't covered by the hard case.. but it does look quite nice.
the stand case looks almost exactly as one that is available from Verizon w/ a holster. I am using this myself and only because of the stand - i don't mind that the top and bottom are exposed as I'm not really expecting to use the case for protection.
I like the case, how skinny is the case? Does it add much bulk? I like the fact that the top is not covered so I can dock the phone.
the stand hard case is really beatiful AND usefull... a precious things, could you make a little review on youtube ? i like to see it if stay in place well in landscape (i bet in portrait if you plug the cable on top the razr tip).
ATTENTION:barely hard case bit difficult press power button
pics will explain to you,so I recommend stand hard case
left Barely Stand hard case
right Barely hard case
M4zinkaiser said:
the stand hard case is really beatiful AND usefull... a precious things, could you make a little review on youtube ? i like to see it if stay in place well in landscape (i bet in portrait if you plug the cable on top the razr tip).
Click to expand...
Click to collapse
pics available now,pics better than thousand words
hisuperman said:
ATTENTION:barely hard case bit difficult press power button
pics will explain to you,so I recommend stand hard case
left Barely Stand hard case
right Barely hard case
Click to expand...
Click to collapse
yeah noticed this as well, had to get a razor blade and cut the plastic off which helps alot
Got mine today.. perfect case not usin holster
Sent from my DROID RAZR using XDA Premium App
nice,thanks
just ordered the Stand Hard Case
thanks you nice
I wonder if the materials used for the case are cheap...Of course they are not comparable to kevlar, but are they premium enough to keep the sexy look of the phone?
p_vhd said:
I wonder if the materials used for the case are cheap...Of course they are not comparable to kevlar, but are they premium enough to keep the sexy look of the phone?
Click to expand...
Click to collapse
this one you may looking for http://www.ebay.co.uk/itm/150705998...egories&_fvi=1&_rdc=1&clk_rvr_id=303553692937
thin and nice
I'm just utterly perplexed why manufacturers make cases for this phone with the SIM cutout.
How often during the day do you need to access your SIM and memory card? In my opinion, they just destroy the aesthetic design of the case.
People may say convenience, but in that theory, all other phone's cases should have cutouts on the back.
It makes me completely pass over a case if it has that cutout. Besides my grievances listed above, it's also another spot for a chip or scratch.
Just stupid in my opinion.
Sent from my DROID RAZR using Tapatalk
I completely agree with you, but the stand case doesn't have the cut out - one of the few that doesn't
just got mine in the mail today damn nice. touch exterior and the finish is great! even the ultra capsule sgp cases have some molding material hanging on the edges.
I have the same case as OP. And yes, Verizon sells it. I love it! I had the same exact case/holster for my incredible. It suits my needs perfectly. Recommended!
Sent from my DROID RAZR using XDA App
A word of caution:
I've been using a red Nillkin Hard case for a couple of days now and when I removed it there were a couple of red "stains" on the kevlar back. I've tried getting them off with detergent and even rubbing alcohol but they wont even fade. They're really not that bad but it looks a bit like a spilled ketchup and let it dry and it's bugging the hell out of me!
hisuperman said:
pics available now,pics better than thousand words
Click to expand...
Click to collapse
whoa, i missed this post. nice, so you still have your sgs2 too, eh
btw, i used nillkin standing hard case on sgs2, but that one has smooth polished slippery surface i can barely hold with my sweaty hands. this one looks much better, not so slippery i guess.. :kewl:
My buddy has been creating molds and making true carbon fiber parts for our motorcycles. I attached a pic of a front sprocket cover he just made for his Aprilia... Anyway, I asked him if he could make a mold of a phone case, and produce some high quality, true carbon fiber cases for the Rezond, iPhone 4, etc... He said sure, he can take my case and make a mold and create a thin and incredibly strong case that would just snap on, be highly polished and look amazing.
He has not yet come up with a price, but we are thinking somewhere in the $30-$40 range once he gets the mold and process down, makes sure the fitment is perfect, gets the finish and polish perfect, etc... then he can start producing them.
I know that I have always wanted a real carbon fiber case, not that crappy plastic with the fake weave, and when I did find some they never made one for my phone and if they did, they were like $100 or something crazy...
So I ask you folks, if we could produce a really nice quality item at a really fair price, would there be enough demand to justify it? Would anyone be interested?
Here is what his sprocket cover looks like, so you can get an idea of how the finished product would look. The stuff is strong as hell, and weighs nothing, would add almost no bulk to the phone if done properly.
Thoughts?
If you made 1 for the Galaxy Nexus LTE I'd buy it.
From my Sexii G Nexii
[email protected] said:
If you made 1 for the Galaxy Nexus LTE I'd buy it.
From my Sexii G Nexii
Click to expand...
Click to collapse
Well, the beauty of this is that we don't need a phone to make a mold. We can take a plastic snap on case that we can buy pretty cheap, and make a mold from that, lay the kevlar weave, pour in the epoxy and vacuum seal it to impregnate the weave and remove all the air bubbles and then let it cure for 24 hours. It would be a slow process, but if the demand is there, we could make up a batch, sell them, then make another batch.
The case would have to be the single piece snap-on type. This stuff has the tensile strength of steel, so it is not going to want to bend a lot. It will have to flex slightly and snap securely on. We will play around until we get it perfect, and then show the finished product and see if people are interested.
Thanks for the feedback. If this works and he sells a decent amount, he can make different molds for different phones, shouldn't be a problem if the demand is there.
Hell yes!
KORM via the beast known as the Rezound.
txkorm said:
Hell yes!
KORM via the beast known as the Rezound.
Click to expand...
Click to collapse
Cool. My friend Daniel is one of those guys that whatever he does, it just comes out awesome. I once needed some touch up paint done to a 2007 Ducati Monster S4RS, and in his garage he added some lines and things and it looked like a factory paint job. The guy has skills.
I got a gouge in my tank, and needed the red lines repaired, and I wanted some green added so that we would have all 3 colors of the Italian Flag on the bike, and this is what he did in his garage one day. Came out amazing looking, several layers of clear, looks like it came that way from the factory... So if he decides to do this, rest assured it will be top notch work and worth every penny.
I'm definitely in, hope this happens soon!
Thanks!
Sent from my ADR6425LVW using Tapatalk
I am gonna get my plastic case to him this weekend so that he can make a mold for the Rezound. Will keep you guys posted, but it will probably take a week for the first completed unit to see the light of day, and we will see where we stand at that point.
There's a "Barley There" case that would be perfect for this. Might be cool to have a hole for the beats logo IMO. The red would add some nice contrast with carbon.
Sweet bike by the way. Looks awesome.
KORM via the beast known as the Rezound.
SquireSCA said:
My buddy has been creating molds and making true carbon fiber parts for our motorcycles. I attached a pic of a front sprocket cover he just made for his Aprilia... Anyway, I asked him if he could make a mold of a phone case, and produce some high quality, true carbon fiber cases for the Rezond, iPhone 4, etc... He said sure, he can take my case and make a mold and create a thin and incredibly strong case that would just snap on, be highly polished and look amazing.
He has not yet come up with a price, but we are thinking somewhere in the $30-$40 range once he gets the mold and process down, makes sure the fitment is perfect, gets the finish and polish perfect, etc... then he can start producing them.
I know that I have always wanted a real carbon fiber case, not that crappy plastic with the fake weave, and when I did find some they never made one for my phone and if they did, they were like $100 or something crazy...
So I ask you folks, if we could produce a really nice quality item at a really fair price, would there be enough demand to justify it? Would anyone be interested?
Here is what his sprocket cover looks like, so you can get an idea of how the finished product would look. The stuff is strong as hell, and weighs nothing, would add almost no bulk to the phone if done properly.
Thoughts?
Click to expand...
Click to collapse
Hey dont mean to jump the subject but pm me have some questions...i ride as well.. I see your in the Atlanta area..You flagging..do any track days
txkorm said:
There's a "Barley There" case that would be perfect for this. Might be cool to have a hole for the beats logo IMO. The red would add some nice contrast with carbon.
Sweet bike by the way. Looks awesome.
KORM via the beast known as the Rezound.
Click to expand...
Click to collapse
Yeah, I actually have one of these that we were going to use as a starting point for the mold:
http://shop.htcpedia.com/htc-vigor-hard-shell-cases.html
We could make a hole for the Beats logo, but he can also buy the kevlar weave in different colors, and red is one of them.
antawnm26 said:
Hey dont mean to jump the subject but pm me have some questions...i ride as well.. I see your in the Atlanta area..You flagging..do any track days
Click to expand...
Click to collapse
Yeah, in Atlanta area, I have a Triumph Daytona 675 and my girlfriend has an '11 GSX-R600. Both of us do track days at Road A, Tally, Barber, etc... I will shoot you a PM.
SquireSCA said:
Yeah, I actually have one of these that we were going to use as a starting point for the mold:
http://shop.htcpedia.com/htc-vigor-hard-shell-cases.html
We could make a hole for the Beats logo, but he can also buy the kevlar weave in different colors, and red is one of them.
Click to expand...
Click to collapse
Does that case have holes for the two noise canceling mics or whatever they are in the bottom left corner of the back?
KORM via the beast known as the Rezound.
txkorm said:
Does that case have holes for the two noise canceling mics or whatever they are in the bottom left corner of the back?
KORM via the beast known as the Rezound.
Click to expand...
Click to collapse
We will make sure that it does. The one on the bottom is open already, but we would need to make a hole to the left of the Beats logo.
We will have everything uncovered that needs to be.
I'm not a case guy but I'm getting excited about this. If the price is right and it comes out right, I could see myself getting a red one to. Now the suspense is killing me.
KORM via the beast known as the Rezound.
this would be awesome
I would be in for this....I'll put a Leo Vince SBK sticker on my phone just like I have on my bike!
Marcismo55 said:
I would be in for this....I'll put a Leo Vince SBK sticker on my phone just like I have on my bike!
Click to expand...
Click to collapse
Or a #55 on the back in memory of Simoncelli could be cool. I wonder if a decal could be applied to the weave before putting in the epoxy? Would be cool to have things under the clear... Hmmm...
I would be very interested in a black/dark grey one. What would be even sicker is if you could replicate the plastic part of the otterbox case with carbon fiber. That would be incredible. That way it would still have the silicone inside, but the outside would be carbon fiber.
Daniel is not a member here but he is monitoring the thread. I think that making C/F parts to replace the plastic "skeleton" of things like the Otterbox is a great idea. All we would need is the plastic part to make a mold, and in some ways that might be easier to make than the standard snap on case that doesn't have the under-layer of silicone... Hmmm....
SquireSCA said:
Daniel is not a member here but he is monitoring the thread. I think that making C/F parts to replace the plastic "skeleton" of things like the Otterbox is a great idea. All we would need is the plastic part to make a mold, and in some ways that might be easier to make than the standard snap on case that doesn't have the under-layer of silicone... Hmmm....
Click to expand...
Click to collapse
That would be nice. Maybe then I would use my Otterbox....otherwise I hate the thing.
Inspired by the case in the link below, I am on a quest to make a case. If anyone wants to make some with me, let's talk. If someone is interested in doing a rugged metal/rubber/Plexiglas case for their note, and has some tools to help (like a CNC router) we can both put in work on different parts and get some nice cases. (Such as, I powder coat them and make the rubber inserts, and you machine the aluminum blocks. We both pay equal prices for the parts, but labor is free because we both contribute to it) that is just an example, let's talk or give me advice please! Here is the post that I made before:
Orange_furball said:
Yes. I'm considering asking someone how much it would be to rout a case from aluminum (unless I can do it with a dremel?) And then make some sort of mold for a rubber insert. I can also get a Plexiglas front cover cut (its not guerilla glass, but it'll do and is cheaper to replace) I can get the aluminum decently cheap (by the pound) and if I get some routing bits I'm sure I can figure it out. The hardest part is the machining of the aluminum and the molding of the rubber.
As for paining, I can get it power coated (lasts about 10 years!) For a few bucks.
Anyone have any ideas? The only thing in concerned about is the headphone plug cover, but that can be otter box style rubber, as long as the outside is metal
Does anyone know how to mold rubber? Or would I be better off buying a silicone case and making a two piece aluminum shell, 4 screws on it in each corner and the plexi screen protector sandwich in between. Also a camera/flash protector of some sort.
So here is what I need to know:
1)How to make the speaker waterproof
2) how to mold silicone/rubber for a custom phone case
3) how to machine aluminum with average tools (no workshop available unfortunately)
4) how to do the machining and molding cheaply
5) design for the spen area. I don't see an easy way to plug that to make the case water resistant
6) antenna issues...
sent from a phone or tablet using an app.
Click to expand...
Click to collapse
Original post:
http://www.geeky-gadgets.com/lunatik-taktik-shockproof-rugged-iphone-case-video-22-06-2012/
Gah. Saw this on macrumors and fell in love. Is there anything like this for the galaxy note?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Orange_furball said:
http://www.geeky-gadgets.com/lunatik-taktik-shockproof-rugged-iphone-case-video-22-06-2012/
Gah. Saw this on macrumors and fell in love. Is there anything like this for the galaxy note?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I don't know of anything like that for the Note. But if you do find anything, please post it in this thread! That thing looks awesome!
It looks like its not even availble for the iphone yet. The case is a kickstarter project.
Sent from my SAMSUNG-SGH-I717 using xda premium
I like this one https://www.mophie.com/juice-pack-PRO-Rugged-case-for-iPhone-4-4S-p/2120_jppr-ip4-blk.htm
The gf loves it, and temps me all the time to switching my Galaxy Note to an iPhone 4s...
Nothing like that will ever come to Android. Sad.
This is really sad. If I had access to a cnc router, I would make a few metal shells and mold some rubber inserts. I want a rugged case, but not like the otter box. Something that is actually high quality. I mean metal, rubber, and guerrilla glass! For $25 (I think) more than the otter box defender!
I am always jealous of the cases for the iPhone. I can't find any that make me happy, so I *carefully* use my phone naked.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Ray Dx said:
Here
Click to expand...
Click to collapse
None of those are metal...
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
The note would be monstrous with that. It makes the iPhone look bigger than the Note. What the hell do you need that much protection for? Phone insurance and a tpu case is all anybody should ever need
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
welchertc said:
The note would be monstrous with that. It makes the iPhone look bigger than the Note. What the hell do you need that much protection for? Phone insurance and a tpu case is all anybody should ever need
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I don't have insurance. I just forgot to get it and honestly it seems like a rip off. I used it on my old Garmin Nuvifone G60 once but that was because I dropped it out of my second story window by accident (long story) every phone after that has never had insurance. I wanted it for the note, but I have been going strong since march 19th and its still in one piece
But with an awesome case like that I can throw my phone at the ground for no reason and not break it!
Sent from my SAMSUNG-SGH-I717 using an app that has forums and such
Finally a reason to want an iphone!
Only design flaw I see is the internal electronics.
Chief Geek said:
Finally a reason to want an iphone!
Only design flaw I see is the internal electronics.
Click to expand...
Click to collapse
And the software...
sent from a phone or tablet using an app.
The only thing I am truly envious about in regards to apple products is the mind blowing assortment of accessories. :/ Darn. I would definitely invest in this even though I have insurance on my phone, it still is a pain.
But back to your needs, you want a metal phone case? Otterbox seems similar but do you not like the rubber/plastic aspect of it?
Ph0n3D0rk said:
The only thing I am truly envious about in regards to apple products is the mind blowing assortment of accessories. :/ Darn. I would definitely invest in this even though I have insurance on my phone, it still is a pain.
But back to your needs, you want a metal phone case? Otterbox seems similar but do you not like the rubber/plastic aspect of it?
Click to expand...
Click to collapse
Yes. I'm considering asking someone how much it would be to rout a case from aluminum (unless I can do it with a dremel?) And then make some sort of mold for a rubber insert. I can also get a Plexiglas front cover cut (its not guerilla glass, but it'll do and is cheaper to replace) I can get the aluminum decently cheap (by the pound) and if I get some routing bits I'm sure I can figure it out. The hardest part is the machining of the aluminum and the molding of the rubber.
As for paining, I can get it power coated (lasts about 10 years!) For a few bucks.
Anyone have any ideas? The only thing in concerned about is the headphone plug cover, but that can be otter box style rubber, as long as the outside is metal
Does anyone know how to mold rubber? Or would I be better off buying a silicone case and making a two piece aluminum shell, 4 screws on it in each corner and the plexi screen protector sandwich in between. Also a camera/flash protector of some sort.
So here is what I need to know:
1)How to make the speaker waterproof
2) how to mold silicone/rubber for a custom phone case
3) how to machine aluminum with average tools (no workshop available unfortunately)
4) how to do the machining and molding cheaply
5) design for the spen area. I don't see an easy way to plug that to make the case water resistant
6) antenna issues...
sent from a phone or tablet using an app.
Anyone have advice?
sent from a phone or tablet using an app.
Just trying to be realistic here. I don't think you will be able to create such a case yourself since you barely have a clue on where to start.
Just look at your list:
Orange_furball said:
So here is what I need to know:
1)How to make the speaker waterproof
2) how to mold silicone/rubber for a custom phone case
3) how to machine aluminum with average tools (no workshop available unfortunately)
4) how to do the machining and molding cheaply
5) design for the spen area. I don't see an easy way to plug that to make the case water resistant
6) antenna issues...
Click to expand...
Click to collapse
You're basically asking us how to do the whole thing.
fbauto1 said:
Just trying to be realistic here. I don't think you will be able to create such a case yourself since you barely have a clue on where to start.
Just look at your list:
You're basically asking us how to do the whole thing.
Click to expand...
Click to collapse
I'm asking for advice. I can do it, but it might not be the best way. Except the antenna issues. I'm clueless on that
sent from a phone or tablet using an app.
Orange_furball said:
I'm asking for advice. I can do it, but it might not be the best way. Except the antenna issues. I'm clueless on that
sent from a phone or tablet using an app.
Click to expand...
Click to collapse
This one is pretty sweet.
http://www.sweet-armor.com/6-sweet-armor-gnote
If you can use a CNC machine you're welcome. I might try to make one of these for a final in my CNC classes in the fall.
iStatiK said:
This one is pretty sweet.
http://www.sweet-armor.com/6-sweet-armor-gnote
If you can use a CNC machine you're welcome. I might try to make one of these for a final in my CNC classes in the fall.
Click to expand...
Click to collapse
I love love love bumpers. But they don't offer enough protection IMHO. But wow. Those are really nice finishes
sent from a phone or tablet using an app.
They do look quite nice. Protection for what the screen?
Sent from my SAMSUNG-SGH-I717 using xda premium
iStatiK said:
They do look quite nice. Protection for what the screen?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
And back
sent from a phone or tablet using an app. :shocked:
Orange_furball said:
I'm asking for advice. I can do it, but it might not be the best way. Except the antenna issues. I'm clueless on that
sent from a phone or tablet using an app.
Click to expand...
Click to collapse
That is an awesome looking case. BUT making it out of aluminum rather than plastic? Aside from the weight, folks report signal loss with bumpers let alone a full metal enclosure. It would be the equivalent of a Faraday cage.
ASUS goofed with the Transformer Prime's completely aluminum case which caused more than a few issues with GPS. The higher resolution follow up model fixes this with an ugly plastic section across the top.
Apple fwiw, mostly accounted for their iPhone's metal case by placing antenna(s) behind the non-metallic logo.
My other suggestion would be to do a mock up just to get a sense of the size and practicality of a case this size - draw it up and cut it out of wood.
Definitely following this thread. I love this kind of stuff.
From my DAGr8 AOKP Powered Note
Obviously any case will offer more protection, and this was a very expensive phone no doubt... But I dont want to get a case other than switching out the replacement back battery cover, because once you put a case on it, it makes it even larger or my hands. I love the thin profile of the note 3 and with gorilla glass it wont scratch easily, Im super careful when I set it down on flat surfaces and if I drop it well thats the chance I'll take. I also like the chrome accents and the silvery edge that goes all around the phone, any case besides a replament back cover will obviously cover the silver fake metal sides that go all around the phone.
so is this a question? looks like you already made your decision on the matter.
obviously, any accessory is an option, not a requirement. accidents happen. cases protect the phone in those incidents. it'll also keep the original housing of the phone in better condition than the usual wear and tear if you're looking to sell it later on.
If you choose not to use a case, that's perfectly fine.
iahk said:
so is this a question? looks like you already made your decision on the matter.
obviously, any accessory is an option, not a requirement. accidents happen. cases protect the phone in those incidents. it'll also keep the original housing of the phone in better condition than the usual wear and tear if you're looking to sell it later on.
If you choose not to use a case, that's perfectly fine.
Click to expand...
Click to collapse
I'd love to go naked, the thin profile of this phone is terrific. But I'm too scared so this is why i like the official Samsung flip covers that replace the back cover. They maintain the thin profile but at least offer some more protection than going naked. As a great bonus they turn the screen on and off when you open and close the cover respectively.
Its not if you don't plan to sell anytime soon. Screen protectors degrade image quality and most non OEM cases look tacky.
I got the slim fit spigen case. Initial trial of it, although it's probably not adding a whole lot of weight, it feels like it is compared to when I was running naked for the first couple weeks while waiting for it to come in. I've since opted to run naked. I do have a slim armour spigen coming in for days where I will be a bit more active or if I'm mounting it onto something.
IMO, flip cases are annoying because I snap photos all the time, and the flip cases simply get in the way requiring me to hold it with two hands when other cases just one hand operation to snap works. As well unless it's the s-view ones, its super annoying to flip open everytime you want to check something small like the time.
My phone itself is naked.
I can't stand flipcases, as the flap keeps getting in the way of everything. (I'm a woman, so I have even less chance of holding it in one hand, Meaning I always have the flap in the palm of my hand.)
Screen protectors look ugly, are a nightmare to apply and reduce the screen quality. My phone goes nowhere near my keys, so it's not needed.
I am keeping an eye out for an aluminium backcover, but so far there's very little of them. Those that are available don't ship outside the US.
I do keep the phone in a walletcase when it's in my pocket or on the table. This way I can lay it on top of the case so I don't scratch the camera: http://shop.golla.com/epages/Golla.sf/en_GB/?ObjectPath=/Shops/Golla/Products/G1406
I admire you naked guys really, I don't dare that my 700€ device could drop and brake. It's a huge device in hand and if you do a work that is hard the phone eventually will drop, also you cannot grab it fully with 1 hand. Offcourse I love also the slim naked feel of it but I don't risk it. Atm I have a clear bumber and a tempered tr glass till my Spigen case arrives and I feel secure.
Sent from my SM-N9005 using Tapatalk
It's silly to not have a case on a $700 device that you use throughout each and every day. I work in cellular retail and every time someone brings in a broken smartphone without a case I ask them about it, and their response is always along the lines of "I'm always super careful and this has never happened before!" and half the time they don't have insurance either.
Accidents happen, which is why they are called accidents; no one can be 100% sure they won't have a careless moment. Not to mention sometimes it's someone ELSE'S carelessness that can end with your phone being broken.
Verizon has a thin shell case (with optional holster) that provides a little grip, a handy kickstand, and most importantly a bit of a raised edge along the screen and camera. It probably won't help much for a 6 ft drop on concrete, but it's definitely better than nothing at all and will at least help prevent scratches if you are against screen protectors.
Schlanz said:
Not to mention sometimes it's someone ELSE'S carelessness that can end with your phone being broken.
Click to expand...
Click to collapse
If you give someone else your $1000 phone, even to hold for a second, you're an insult to evolution and would do well to remove yourself from the gene pool.
ShadowLea said:
If you give someone else your $1000 phone, even to hold for a second, you're an insult to evolution and would do well to remove yourself from the gene pool.
Click to expand...
Click to collapse
Uhm. That someone ELSE is very often a child, so a case is necessary, and, genes already passed on, jackalope.
zmore said:
Uhm. That someone ELSE is very often a child, so a case is necessary, and, genes already passed on, jackalope.
Click to expand...
Click to collapse
I was not referring to you in person.
But letting a child hold your 1000 dollar phone is even more idiotic.... I would not let it hold a 200 dollar phone, let alone something that costs more than the average car.
Also, what's a jackalope?
ShadowLea said:
But letting a child hold your 1000 dollar phone is even more idiotic.... I would not let it hold a 200 dollar phone, let alone something that costs more than the average car.
Click to expand...
Click to collapse
You'll change your tune quick if/when you do have kids
ShadowLea said:
I was not referring to you in person.
But letting a child hold your 1000 dollar phone is even more idiotic.... I would not let it hold a 200 dollar phone, let alone something that costs more than the average car.
Also, what's a jackalope?
Click to expand...
Click to collapse
2nd......what's a jackalope....sounds like a coded curse parent's use. I shall remember!
my last three main daily driver phone I ran naked. Asus PDA (plastic screen), T-Mobile dash, HTC evo 3d. There were some other pretty boss phones in that mix of the last ten years but those were the phones I loved. Non of them had screen protectors or cases. I got my NOTE3 and now I have been protector/case concerned. The device is just so thin and so jewelry like that I'm going to wrap it up tight and see if it adversely effects the experience. Not Otterbox tight, I never understood that methodology. I'm going glass screen protector and slimmest of cases. Unles there is an artful reason to do otherwise which I think is possible. But I need a Golla bag without Zipper or carbineer, just dual belt loop. A saggy bag with a big velco flap that I can use as a transport mechanism. Hard clip holsters suck. I want padded sliding desert bag style low profile, that I set on my belt in the morning with loops and forget about until night. A few years ago Golla had that exact thing. Now they don't. I'm just going to sew myself what I want out of canvas until the market catches up. Horizontal belt clip? are you kidding me?
1 question? Are you mad? This phone? Naked? This is a precious baby you don't go naked with this. It's that awesome I'm waiting for the otterbox.
Sent Via Tmobile note 3
sitka said:
my last three main daily driver phone I ran naked. Asus PDA (plastic screen), T-Mobile dash, HTC evo 3d. There were some other pretty boss phones in that mix of the last ten years but those were the phones I loved. Non of them had screen protectors or cases. I got my NOTE3 and now I have been protector/case concerned. The device is just so thin and so jewelry like that I'm going to wrap it up tight and see if it adversely effects the experience. Not Otterbox tight, I never understood that methodology. I'm going glass screen protector and slimmest of cases. Unles there is an artful reason to do otherwise which I think is possible. But I need a Golla bag without Zipper or carbineer, just dual belt loop. A saggy bag with a big velco flap that I can use as a transport mechanism. Hard clip holsters suck. I want padded sliding desert bag style low profile, that I set on my belt in the morning with loops and forget about until night. A few years ago Golla had that exact thing. Now they don't. I'm just going to sew myself what I want out of canvas until the market catches up. Horizontal belt clip? are you kidding me?
Click to expand...
Click to collapse
What.....huh...you lost me !! Some where around Albuquerque.
zmore said:
You'll change your tune quick if/when you do have kids
Click to expand...
Click to collapse
No, not very likely; I'm asexual. Me having children is something that'll never happen.
I occasionally teach 6-12 year olds for a day. (a few friends of the family are primary school teachers, they sometimes ask me to do photography, tech or design classes for them.)
Not a chance in hell am I letting them touch my phone. Or my tablet. Or my laptop. Or my camera. Or anything else that could easily be damaged.
Also, according to Google a jackalope is a rabbit with antlers.. Is Google on drugs or is that actually correct?
Send From My Samsung Galaxy Note 3 N9005 Using Tapatalk
ShadowLea said:
I was not referring to you in person.
But letting a child hold your 1000 dollar phone is even more idiotic.... I would not let it hold a 200 dollar phone, let alone something that costs more than the average car.
Also, what's a jackalope?
Click to expand...
Click to collapse
Your $700 N3, wait I mean $1000 N3 costs more than the average car? You don't let anyone touch your phone? My girl can use it anytime she wants, if she needs it. My godson could as angry birds on it anytime as well... It's only a phone. It's insured, and of not, easily replaceable. The day any material possession becomes more valuable than a person in my life, is a sad day indeed.
PS- I absolutely love my phone too. Just not as much as people in my life.
Sent from my SM-N900T using Xparent Skyblue Tapatalk 2
ShadowLea said:
Also, according to Google a jackalope is a rabbit with antlers.. Is Google on drugs or is that actually correct?
Send From My Samsung Galaxy Note 3 N9005 Using Tapatalk
Click to expand...
Click to collapse
This is correct. Remember Americas Funniest Home videos from years ago?
Sent from my Galaxy Nexus using Xparent SkyBlue Tapatalk 2
Warrior1975 said:
Your $700 N3, wait I mean $1000 N3 costs more than the average car? You don't let anyone touch your phone? My girl can use it anytime she wants, if she needs it. My godson could as angry birds on it anytime as well... It's only a phone. It's insured, and of not, easily replaceable. The day any material possession becomes more valuable than a person in my life, is a sad day indeed.
PS- I absolutely love my phone too. Just not as much as people in my life.
Click to expand...
Click to collapse
Yes, 1025 USD, it's 750 euros here. Welcome to Europe.
I'm 22, you don't seriously think people my age can afford cars over that price I should hope. Certainly not in this economy.
I suppose that's the difference, I don't have such people in my life.
nickles96 said:
This is correct. Remember Americas Funniest Home videos from years ago?
Click to expand...
Click to collapse
Only by name. I tend to avoid SBS6 and RTL4.
Send From My Samsung Galaxy Note 3 N9005 Using Tapatalk
I bought this white back for the phone to see what i could do with it. I took the letters off because they were not stuck on there good. They came off with a dust can.
Decided to paint it a sliver color to match the frame as close as possible. I hand painted the inside of the letters black. I don't know what to do about the "M" yet, if i'm going to put one on there or not. Maybe something else, idk.
This is what I have so far. It looks like it has a brushed look to it. After I painted it, I scuffed it with a dish scrubber to give it that look.
Last thing I do, will be spray a satin clear.
That thread title though.
Looks good.
I thought I was on p&*#hub for a second...
EmperorX said:
I thought I was on p&*#hub for a second...
Click to expand...
Click to collapse
lol
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
dcemtp1 said:
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
Click to expand...
Click to collapse
I'm going to see how this one holds up first. I have some ideas for other covers lol
just cleared it a bit ago. ended up using a matte clear. just going to let it dry really good and maybe polish it a lil before installing it.
looks pretty good
Would be nice to see it on your phone!
I like it
I just got around to installing it.
pics
Looks great
albert1500 said:
I just got around to installing it.
pics
Click to expand...
Click to collapse
I'd buy one from you if you decide to sell it
Definitely a cool option to have something unique like that.
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
literadesign said:
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I used rust-o-leum paint and clear. I'm not worried about the bending. I'm taking this one off in the next few days.
I started another one with a different silver. I wont be reusing the current one.
FYI they make paint for plastic (bendable) it's mostly for bumpers on cars
I took the cover off earlier and the paint held up very well, i didnt bend the cover a whole lot to begin... i wasnt going to use it again so i decided it to test how much bend it would take and i had to bend it a lot in order for the paint to wrinkle.
I tried doing something similar for my daughter that got bored by the same old phone sleeve/case that was partially clearly transparent and partially frosted look.
I decided to paint the frosted part using RAL 9005 matte black spray paint. I haven't clear coated it yet as it was just an experiment. If it turns out to be ok I may coast it using some not so rigid coat to avoid cracking due to the rubbery nature of this sleeve.
She likes the end result. Me too. Unfortunately I'm not able to add images to my posts (haven't posted enough posts to XDA - apparently)
images.tapatalk-cdn.com/15/04/23/2214dce5a324e57d152757f716f672b9.jpg
Sent from my Galaxy Nexus using Tapatalk
How did you stick the back cover back on?
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
lotus49 said:
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
Click to expand...
Click to collapse
Uuhm... i had thought the idea of seeing more than one back cover in some of the more recent photo's would have indicated it... but also in the first post he says he bought a white back cover a while ago to see what he could do with it. He didn't remove and replace the same back cover. Pretty sure that's NOT possible due to the adhesive... or at least risks the ability to put it back on firmly and smoothly.