S2 i9100 with pre-installed display protector??? - Galaxy S II Q&A, Help & Troubleshooting

Hello
I just purchased a white Galaxy S2 i9100. The phone was obviously sealed as it was bought from Vodafone Germany.
Now, removing the usual "brand new" display protector (The one with the phone's features printed on and so forth) ... After that, I really thought the phone had a bare LCD, I always cleaned it, etc, shiny and clean. However, after a few days I started seeing a bubble come up....
Then I realized it had a preinstalled screen protector? Really thin and I can see it on the edges of the phone...
Anyone else has experienced this?

Probably it was bought by someone else earlier who might have installed the screen protector and later returned it to the shop for some reason.

Odd. I don't think mine has a screen protector. But there was a very thin plastic covering on the home button, which I found odd.

Mine neither, if it has one you would have seen it at the front cam, the sensor, and the speaker bcz they are left out.. my home button got one too, yay

mine neither, too.
The only Protector was the thing with informations about the phone
MFG Chabstyle

Related

HTC Shift Screen Protector

Hi All, since a lot of us are getting the shift now, i guess it's time to think about which screen protector you are going to use, personally i always enjoy the Martin Field Overlay Screen protector, but they don't seems to have one for the shift yet, what do you guys think? found any good screen protector you are going to use?
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
jarbi said:
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
Click to expand...
Click to collapse
yes, i am aware of that, it just i have been using HTC for more then 7 years now, past experience told me i better wait for better screen protector, because once you put it the HTC one, it's so difficult to remove it, and if you do try to remove it and swap it with something else, you leave a mark on the screen, some user even experience bend and uneven screen because the original one is just so sticky.
There don't seem to be many screen protectors specifically for the Shift yet, I'm sure there will be soon. I fitted the included one but not very well, I managed to get a couple of dust specks under it.
I've ordered some generic 7" protectors from Durasec http://www.durasec.com/catalog/index.php?language=en
I also ordered one of their liquid nanotech screen protector kits, don't know much about it but it appears to be a liquid which you spray onto the screen to form a seal. Should be interesting...
Is it neccessary?
Hi,
please, give me an answer to a stupid question?
Is it really necessary to apply a screen protector. Why don't the manufacturers do it in the first place.
What are the advantages, what the disadvantages. Okay, protection comes to mind as an advantage, but shouldn't the original screen be resilient enough?
I'd really like to here some informative opinions.
I have been using a HTC Vario II for some time now without any protection and I can't detect any scratches.
Settembrini
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
firedup said:
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
Click to expand...
Click to collapse
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Pantaloonie said:
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
Click to expand...
Click to collapse
mmm. sounds interesting!
I've got the original on but I have a scratch on the screen and wanted to remove it to see if its just the screen protector or the actual screen that is scratched. Have tried in vain to get at it to peel it off...
Just managed to get a corner - it came off no problem and thankfully the scratch isnt there! Just need a new protector now, my OCD is starting to kick in. Let me know how you get on with the Duratecs! Cheers
wu5262 said:
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Click to expand...
Click to collapse
sounds posh! I'll check it out, thanks
Screen Protector Ultraclear and a Anti Glare
http://shop.brando.com.hk/search.php?keyword=HTC+Shift&Submit=Product+Search
I have had this for my Athena and Brando also have two versions for the Shift.
Computersylvia
DO NOT by the Durasec. Got mine from Germany, welcome to bubble hell.
Just wish I knew where the original ones are from....
Anyone found any decent ones?
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Pantaloonie said:
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Click to expand...
Click to collapse
I'd leave it on if I were you - I only took mine off as it had a hair underneath and I was losing sleep over it. Took a while but once you get a hold of a little corner it lifts off no problem. I've emailed HTC to ask if they can send me another but I'm notn holding my breath.
Would stay away from the standard Duratec - waste of £8. Let me know if you try the liquid one though!
Hi -
Anyone used the liquid Duratec shield on the Shift yet?
Cheers - Dave
Duratec Crap
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Settembrini said:
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Click to expand...
Click to collapse
How did you remove the original screen protector without damaging the display? What is the problem with the Duratec screens?
Hi,
removal was difficult, but I did it. I don't know the exact English words. I used this sticky tape which you wrap up parcels with, tape is of a brownish colour. That I stuck onto the screen protector until it lifted in one corner.
Duratec is thin and cheap material and I guess it is not possible to get it on the screen without lots of bubbles.
Now I have ordered a protector from Brando, was that the name?
We will see.
S.
I really like the anti glare screen protector from www.pocketpctechs.com . I use it with my both my SMT5800 cellphone and my Motion Tablet PC. I'm hoping I can get one sized for the Shift. But my Shift is not here yet so I don't know the size. I can't even tell I have a screen protector with this brand.
screen protector abuse
Hi,
any news about the "best" protector.
In the meantime I have abused 4 or 5. Duratec's cheap ones aren't of any other use than to clean the screen from dust particles.
I tried the Brando "ultra clear" was that the name? Relativ easy to apply, but in the end I fiddled with it too long. Had to peel it off.
Next I tried Brando "plus". Easily to apply, but foil slipped underneath the edge of the screen, when lifting it up to clean off a piece of fluff the protectors edge was damaged.
But the last one is really easy to apply. But, but, they or the distributers just declared them to be for the Shift, originally they are for the eee, how many eeeees were there?
So the screen protector doesn't really fit. At the edges there the foil doesn't cover about 1 or 2 millimeters of the Shift's screen.
Maybe somtime soon they will sell a protector that is for the Shift.
Please, if anyone has got the ultimate protector mention it here:
perfect fit and easily to apply would be nice features.
S.

Screen Protector - to be or not to be?

Hey guys, please vote here - who use screen protector with own TP2
And those who use, please describe here who is the manufacturer of your screen protector and your experience, how good is it for you.
Most recent HTC devices have come with pretty good screen protectors included in the box. I didn't use a screen protector on my first device, and I'm not making that mistake again.
anyone knows why they don't install it from the factory?
I voted and i own an x1. I use.
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
ohyeahar said:
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
Click to expand...
Click to collapse
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
test157 said:
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
Click to expand...
Click to collapse
That's true, but when you use your device for some months without any protector, it will never be so clear as with a screenprotector (that you can replace when needed )
Ranney
Based on what I read in the accessories forum, I decided to try a Martin Fields one. Had it on for 2 days now - so far, so good. The one that came with the phone kept peeling off at the bottom edge near the buttons.
I didn't bother with my Vario III, as the ones I tried seriously affected the screen responsivness. Of course it got a key scratch in the first 3 months:-(
On my TP2 I installed the supplied one, and will get a Martin Fields one.
However I've got to return the unit (dodgy radio), so it is vital not to scratch it before returning it!
I messed upp my original screen protector
So i bought the Copter screenprotector from Skalshop.se it's a bit rubbery, but other than that it works good. It came with some liquid spray for aplying the protection. A bit tricky to apply but worked good in the end.
Martin Fields - where from you guys are buying them? I don't see them at ebay for TP2
also - are they really the BEST? or they just have the highest price?
The store from which I bought my TP2 gave me another screen protector - I haven't used the one that came with the device. Probably cost them less than US$1-2 to buy in bulk - I never pay more than US$8 for one retail
Using the one supplied with the evice and it works perfetly (I was against screen protetors when I had a Hermes, but with TP I can barely see it)
I once had a device and when I applied the screen protector I hated it. It improved sunlight visibility by refracting the light, unfortunately this made it harder to read fine print on the screen. I also couldn't remove the protector and was stuck with it. Another one I had tried before that one which was removable, reduced sensitivity too much.
Those are reasons not use one. But as long as the available protectors can be removed in case you don't like them, then it's worth trying them out. That way you don't risk your screen unecessarily.
SEQ said:
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
Click to expand...
Click to collapse
That's right! I use it and it's better than the one that HTC gives us: I have a new one because it was removed while in my pocket.. But now I'm happier!
I´m using touchscreen phones for many years (since my first PALM ) and i´ve noticed that the new screens are much more resistent. I think that you loose quality if you use a screen protector.
Just don´t put your phone in the same pocket that coins, keys,... and use it´s cover when putting it in a bag.
one other advantage with a phone like this should you choose not to use a screen protector is that since the phone has such a large screen and it's so touch optimized you won't get as much wear and tear on the common points of contact (like the "e" on the onscreen keyboard).
I use Proporta Screen Protectors. After I had used then in my Asus P535 I do not want another brand. They protect very well the screen, they were washable and also doesn't change too much the sensation of the touch with the pen or even with fingers.
I dont use one for a few reasons. I dont put my TP2 in any pocket with coins etc. I am pretty careful with it.
Although most importantly im insured on it, accidental damage w/ no excess to when the time comes it gets a bit dodgy ill smash it up and get a new one. If ive still got the TP2 when my contract runs out/upgrade ill probably wap a screen protector on then.

Screen replacement experience

So my boss asked me to replace the screen on his friends note 2...I've done several other screens and wasn't intimidated by the challenge. I ordered glass only and everything went fine and the phone works great...but...the glass seems to make contact with the screen and it almost looks like moisture is caught between. The spot moves and changes shape with pressure...so I took it back off cleaned it again and put it back on...same thing. I ordered another screen and haven't replaced it yet. Was wondering if anyone else has seen this? Fixes? Ideas? Thinking it has to do with the size of the screen and the fact that I can't replace the loca that comes from the factory. Money is the issue keeping him from buying the glass screen assembly.
THE NEW PHONE BOOKS ARE HERE! THE NEW PHONE BOOKS ARE HERE!
I read somewhere that a guy put a screen protector between the glass and the screen in order to prevent the two from making contact. Haven't tried it myself so I don't know how well it works but it might be worth trying.
Well I tried installing a screen protector on the inside. I also tried a second screen. neither of these things worked. I ended up ordering a front housing assembly. I'm disappointed in myself...and the note 2
THE NEW PHONE BOOKS ARE HERE! THE NEW PHONE BOOKS ARE HERE!

Cracked screen under warranty or cheapest repair in the UK?

I've just dropped my three month old Honor 7 and the screen is cracked from the bottom right corner. I bought it new from Amazon UK (sold by Amazon EU S.a.r.L.), it wasn't through Vmall. Is the screen covered under any form of warranty? If not, where's the cheapest place to get it fixed in the UK?
GrandMasterPlank said:
I've just dropped my three month old Honor 7 and the screen is cracked from the bottom right corner. I bought it new from Amazon UK (sold by Amazon EU S.a.r.L.), it wasn't through Vmall. Is the screen covered under any form of warranty? If not, where's the cheapest place to get it fixed in the UK?
Click to expand...
Click to collapse
I think the screen is guaranteed against manufacturing faults, but not the glass against accidental damage.
When I trod on mine in the back of a car, I called Hihonor support and they quoted me £70-80 + £15 inspection and postage charge, which I thought was reasonable, however when calling their repair centre to book mine in they laughed and said it would be at least £130 for Honor 7 screen replacement - they can't do just the glass as it's all bonded to the digitiser and screen.
I decided to buy a new screen (with glass, digitiser and interior frame attached) from eBay for about £40 and fitted it myself. Not as easy as the videos on youtube make it look - it is very difficult to get apart for a start, then the battery is hard to remove. Also, various parts (including all the buttons, vibration motor etc have to be heated with a hairdryer to separate them from the old screen frame and re-installed into the new frame.
Luckily mine is working perfectly now, although I think the screen may not be quite as bright as the original one was.
I wouldn't try to buy just the glass, or even the glass and screen (without the frame) - you'll never get it to look as good as new.
Good luck and let us know how you get on with having it repaired or doing it yourself.
You can PM me if you need any advice
honorable said:
I think the screen is guaranteed against manufacturing faults, but not the glass against accidental damage.
When I trod on mine in the back of a car, I called Hihonor support and they quoted me £70-80 + £15 inspection and postage charge, which I thought was reasonable, however when calling their repair centre to book mine in they laughed and said it would be at least £130 for Honor 7 screen replacement - they can't do just the glass as it's all bonded to the digitiser and screen.
I decided to buy a new screen (with glass, digitiser and interior frame attached) from eBay for about £40 and fitted it myself. Not as easy as the videos on youtube make it look - it is very difficult to get apart for a start, then the battery is hard to remove. Also, various parts (including all the buttons, vibration motor etc have to be heated with a hairdryer to separate them from the old screen frame and re-installed into the new frame.
Luckily mine is working perfectly now, although I think the screen may not be quite as bright as the original one was.
I wouldn't try to buy just the glass, or even the glass and screen (without the frame) - you'll never get it to look as good as new.
Good luck and let us know how you get on with having it repaired or doing it yourself.
You can PM me if you need any advice
Click to expand...
Click to collapse
Thanks dude, much appreciated. I was into it until you started mentioning removing parts by heating them up then thought I'll leave it to the experts. :laugh: Honor UK have quoted me £80 as it's a pretty clean break so I'm going to give them a go and see what they say. If they do the same as they did for you, which they said they wouldn't!, then I'll go with that. Will let you know.
I'm surprised their aren't more threads on hear about replacing screens because this phone does feel fragile despite being reasonably weighty so I'd have thought there'd be loads of cracked screens out there. I dropped my old S5 a couple of times from higher up and the screen survived both times. Am now thinking a tempered glass protector might be in order for the 7 :fingers-crossed:
Mine had a glass protector, but I guess they don't cope with treading on! I've put one on the new screen too.
I also have an S-line gel case which acts as a bit of a buffer against drops.
Let us know if you get yours done for £80
honorable said:
Mine had a glass protector, but I guess they don't cope with treading on! I've put one on the new screen too.
I also have an S-line gel case which acts as a bit of a buffer against drops.
Let us know if you get yours done for £80
Click to expand...
Click to collapse
After reading reviews of the official Honor repair company, SBE Limited, and how they appear to be happy to scam people I thought I'd have a go myself. So I bought a replacement front glass and thought I'd give it a go.
Dissembling the phone is really easy, once you've got the hang of the clips holding the back on, and taking it all apart was easy. What wasn't so easy (read nigh-on impossible) is separating the front glass from the digitiser. I tried and tried and in the end the touch screen just split into a number of layers so I'll need to order the complete screen assembly. My concern is you mentioned you bought one off ebay and it wasn't as bright as the original. From this I'm guessing it wasn't an original screen? I'd like to get an original if I can. Do you have a link to the one you bought? How long did it take coming from China?
Don't know if this is relevant but under the hicare app it allows you to price up replacement parts. Could not find any mention of the Honor 7 but it did list the Honor 5X as £35 so might be worth trying this way to see if they do have the Honor 7.
I got mine from eBay seller called bestsellstuff.
£35.27 at the moment and mine came quicker than expected with 2nd class delivery free.
I don't think any of the eBay sellers will say they are genuine screens, but I think they probably all are - I can't imagine they would be cheap to replicate. Maybe they are seconds or find their way out of the factory somehow....
boroleigh said:
Don't know if this is relevant but under the hicare app it allows you to price up replacement parts. Could not find any mention of the Honor 7 but it did list the Honor 5X as £35 so might be worth trying this way to see if they do have the Honor 7.
Click to expand...
Click to collapse
Thanks for the nod. Tried it but no joy. For some reason they don't support the Honor 7. Very Huawei tbh, they're left hand doesn't know what the right is doing. A bit all over the place.
honorable said:
I got mine from eBay seller called bestsellstuff.
£35.27 at the moment and mine came quicker than expected with 2nd class delivery free.
I don't think any of the eBay sellers will say they are genuine screens, but I think they probably all are - I can't imagine they would be cheap to replicate. Maybe they are seconds or find their way out of the factory somehow....
Click to expand...
Click to collapse
Great stuff, have just ordered the last one they had in stock in they're in France also, so should be quicker than coming from Hong Kong. Funny thing is I hadn't seen their add before, it hadn't come up with my ebay search for 'Honor 7 replacement screen'. Without having the name I'd not have found it and paid more so thanks again! :good:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.
Take photos as you go along incase you need to go back a astep.
I'm not sure if you got to the stage of removing the battery before - it is stuck down very strongly. I just gradually prised mine out, but you might find heating it a bit will release it easier. There aren't any cables underneath it (as some other Honors have).
When heating (with a hairdryer) the small bits of circuit board and components that need to be transferred to the new frame, only do it for long enough to get them to peel off (I used tweezers to do this).
When you come to install each part, there are very small bumps in the frame that you need to line up the equally small holes on the part - makes positioning them easy! Then use a plastic tool to press them firmly onto the frame.
When you come to put everything back, make sure that the very small narrow ribbon cable that goes under the tiny flip-up bracket (the connection to the smart key) goes in fully until it stops. I didn't put mine in completely and the smart key wouldn't work until I re-did it properly.
You may notice that there is a square-ish hole and some slots in the frame (under where the battery goes?) on the new frame which aren't on the old one. If so, you might want to cover them up with some black gaffa tape or thin card - I suspect they are the cause of some light areas at the very sides of my screen, but I don't want to strip mine down again.
honorable said:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.
Take photos as you go along incase you need to go back a astep.
I'm not sure if you got to the stage of removing the battery before - it is stuck down very strongly. I just gradually prised mine out, but you might find heating it a bit will release it easier. There aren't any cables underneath it (as some other Honors have).
When heating (with a hairdryer) the small bits of circuit board and components that need to be transferred to the new frame, only do it for long enough to get them to peel off (I used tweezers to do this).
When you come to install each part, there are very small bumps in the frame that you need to line up the equally small holes on the part - makes positioning them easy! Then use a plastic tool to press them firmly onto the frame.
When you come to put everything back, make sure that the very small narrow ribbon cable that goes under the tiny flip-up bracket (the connection to the smart key) goes in fully until it stops. I didn't put mine in completely and the smart key wouldn't work until I re-did it properly.
You may notice that there is a square-ish hole and some slots in the frame (under where the battery goes?) on the new frame which aren't on the old one. If so, you might want to cover them up with some black gaffa tape or thin card - I suspect they are the cause of some light areas at the very sides of my screen, but I don't want to strip mine down again.
Click to expand...
Click to collapse
Great tips, thanks again. I'll be sorting it as soon as it arrives. Will report on how I get on.
honorable said:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.......
Click to expand...
Click to collapse
Sorted!! Thanks for the advice, was really useful. Took it all on board, took my time (about 1hr) and fitted the new screen. Clipped it all back together and worked perfect first time. £35 to get your screen fixed, amazing. I'll always fix a cracked screen from now on, these repair companies are just profiteering.
Thanks again.
GrandMasterPlank said:
Sorted!! Thanks for the advice, was really useful. Took it all on board, took my time (about 1hr) and fitted the new screen. Clipped it all back together and worked perfect first time. £35 to get your screen fixed, amazing. I'll always fix a cracked screen from now on, these repair companies are just profiteering.
Thanks again.
Click to expand...
Click to collapse
Great news!!
Did you have to cover the square hole and slot to stop light leakage?
Also, is there any light bleeding at the sides and is there any difference in brightness from the original screen?
honorable said:
Great news!!
Did you have to cover the square hole and slot to stop light leakage?
Also, is there any light bleeding at the sides and is there any difference in brightness from the original screen?
Click to expand...
Click to collapse
The screen and housing isn't original Huawei, it's a pattern unit but tbh it looks totally identical in use, no less dim than the original screen. There's also no bleed at all. There weren't any hollows and slots to fill with card under the battery. The only hollow was at the base of the battery as it sat slightly higher up (towards the top of the phone when laid flat) in the casing so I filled that with folded card.
The only slight issue is that the screen shape (rounded corners of the glass) when looking at the phone from the front doesn't fit into the corners of the casing absolutely perfectly. Tbh only a phone nut would notice it, wouldn't be an issue to anyone else.

Issue with actual screen or not?

Hi,
I currently have a problem with my V30+ when I tried to apply the screen guard on it.
At some areas on the phone screen, the screen guard just won't stick properly. I tried a few times, different pieces of screen guard, still the same issue at the same places on phone screen.
I tried the same type of screen guard on my friend's LG V30+ but it didn't have the same problem.
The screen was cleaned, I did make sure there was no dust or anything it, as what I could see the screen was definitely clean.
I work at a phone accessories shop so fitting screen protectors isn't a problem for me. And I understand sometime the screen guard could be faulty, but tried about 5 times, and all of those time, the same issue at same areas on the screen.
I realised my friend's one was manufactured in May 2018 and mine was in Jan 2019. So I wonder if it is because of the actual screen, the difference in manufactured batches? Or do you think I have faulty/bad copy? Or definitely problem with the screen guard.
I know the screen protectors I used aren't made for the V30+, but I really need something to protect, cover the screen from scratches until the proper one comes (Gonna need a while).
What concerns me here that I am having a bad/faulty unit? As looking at this problem, it feels like somehow the screen is concave.
Issue on my phone : https://i.imgur.com/d53z1QM.jpg
Compare with my friend's LG V30+: https://imgur.com/gallery/4RK6R6F
No offence but I think you use poor screen protector quality. I bought my on ebay UK and it looks really good, and it's curved, it stick nearly perfect. Also cover most of the screen.
This is the one I bought :https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F263757262320

Categories

Resources