Dear Fellow Experts,
I am near about to die... seeking advice
I owned a SGSII bellow is config
Android version : 2.3.5
baseband :I9100XXK13
kernel : : 2.6.35.7-I1900ZKSK13-CL603802
[email protected]#2
Build :GINERBREAD.ZSK13
PDA : i9100zsk13
PHONE : i9100xxk13
CSC : i9100zsk13
Click to expand...
Click to collapse
Its already rooted.ANd I dont know who / how root this set . Also I have format Strogae/Sd card. nothing this there
. And I would like to,update it to ICS official release - which i download for sammobile.com .
last night I tried to update it via odin
i follow all the procedure - Enable USB debug mode -> Reboot in Download mode -> connected to odin -> yellow color shown- >
bellow happend
1st try : ( 9.23am - 10.12am )
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
i have disconnect the phone after 45 minites. unplugged usb cable / remove - insert battery.. sarted the same procedure
2nd start 10.23Am - 11.15am
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
Click to expand...
Click to collapse
2 times I tried - and filed . finally I did a factory reset - I have searched a lot- read thorw a lot- couldnt gater that courage to follow that all those procedure...
Note : Kies also saying - this device cant be update via kies- since its rooted and super user apps is there
Some one wise - pls advice what to do and how to do? or where to find a solution.
You know you're not suppose to have Kies on your computer while using Odin to flash?
He is right.. Kill all kies processes before you connect your mobile to pc for using odin
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
He is right.. Kill all kies processes before you connect your mobile to pc for using odin
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hello
That PC dont have Kies - but have USB driver downloaded from sammobile.
what to do now?
Nneel said:
Dear Fellow Experts,
I am near about to die... seeking advice
I owned a SGSII bellow is config
Its already rooted.ANd I dont know who / how root this set . Also I have format Strogae/Sd card. nothing this there
. And I would like to,update it to ICS official release - which i download for sammobile.com .
last night I tried to update it via odin
i follow all the procedure - Enable USB debug mode -> Reboot in Download mode -> connected to odin -> yellow color shown- >
bellow happend
2 times I tried - and filed . finally I did a factory reset - I have searched a lot- read thorw a lot- couldnt gater that courage to follow that all those procedure...
Note : Kies also saying - this device cant be update via kies- since its rooted and super user apps is there
Some one wise - pls advice what to do and how to do? or where to find a solution.
Click to expand...
Click to collapse
First of all , you have to do a factory reset and dont choose USB Debugging (It doesn't matter)
after you have done factory reset (Erase USB Storage too) , You Need To Power Off Your Device then you need to put your phone in Download Mode (Power + Home + Volume Down) , you will get a Yellow Warning , You need to press Volume Up key, then you are in download mode, now you have to make sure that Kies is not running on your PC and then run ODIN (Run As Administrator), after running ODIN, you need to connect your phone via USB .. Odin Will say Added!
After that you have to just choose the .zip file (Downloaded from Sammobile) on PDA and then just click start (Make sure re-partition is not checked, it should be un-ticked)..
and just wait and have patience your phone will be rebooted once its done
Hope it helps
I have the international version of the i9300.
Unrooted and no cwm.
AP: XXELLA
CP: NELK2
CSC: HTDELL2
Windows 8
Odin: Odin307
Often my phone would be not able to wake up, so i decided to factory reset to fix it. This made the phone restart and freeze (and the wakeup problem persists). My conclusion was problems with syncing, but not really sure. This made me want to try a new firmware.
However odin fails with every rom I try with:
-I9300XXEMC3_I9300NEEEMC1_I9300XXEMB6_HOME.tar
-I9300XXBLH3_I9300HTDBLH1_I9300NELH1_HOME.tar.md5
-CF-SGS3-CWM-v5.5-v1.5.tar
Gets stuck when trying to get the PIT. And then fails.
Have tried:
-Running odin as administrator
-Restarting pc
-Installing USB drivers for the s3
Thanks for any help!
Just tried another pc, no help. Got the Odin log here:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMC3_I9300NEEEMC1_I9300XXEMB6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
try install samsung kies since it contain latest usb driver
if still not working try borrow a friend / relative who using windows 7
Make sure you have USB Debugging enabled under Developer Options
Download the OXA Open Europe MC2 from sammobile you don't need to be rooted to flash the rom http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=BTU
Flash this CF Auto Root via Odin to get root access
Woohoo. Installing kies worked.
Thanks MsElise
ag4751 said:
Make sure you have USB Debugging enabled under Developer Options
Click to expand...
Click to collapse
What happens if your phone is bricked and you cannot access developer options on phone?
I have kies installed but Odin does work.
dmuk said:
What happens if your phone is bricked and you cannot access developer options on phone?
I have kies installed but Odin does work.
Click to expand...
Click to collapse
USB debugging is completely irrelevant. This is an Android setting and is not used by recovery or download mode, so just ignore that...
I've been running wanamlite 14.6 (JB 4.1.2) on my Galaxy S2 i9100 for a few months without problems.
Yesterday, my phone turned off before I'd expect the battery to have run out. I charged it overnight and when I tried to turn it on this morning, it got to my lock screen (with battery indicator at the top) then went black and rebooted. The same thing happened about five times, so I went into the PhilZ recovery and did the Wipe Data/Factory Reset. When I rebooted, it got as far as the SAMSUNG logo with the blue swirl, then hung for a few minutes, before restarting and doing the same again. After a few restarts it gets to the "Samsung Galaxy" welcome screen in a foreign language with "Izberite jezik" written above the drop-down (despite the fact that I chose English as the installation language). This screen appears for a couple of seconds (and does not respond to touch) before rebooting again.
I've tried:
Re-flashing the ROM
Factory Reset (again)
Reinstalling the Siyah Kernel
Could anyone let me know what my next steps should be? This is my first rooted phone, and I haven't got a clue how this happened, or how to proceed...
Thanks in advance.
Flash a stock firmware via odin....
Sent from my GT-I9100 using xda premium
Thanks for the reply.
I've just tried that with Odin 3.07 and and I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5
Odin gets stuck at "SetupConnection.."
I've tried a different cable, and a different USB port to no avail.
Plenty more to try, not just usb port and cable. Click the link in my signature and follow the guide there to troubleshoot.
Sent from a galaxy far, far away
I suggest trying once more flash ROM ，link：http://forum.xda-developers.com/showthread.php?t=2365701
I've tried downloading the firmware from the hotfile links in the post wufang640 linked to. Each time I get to 99% (after quite a while) it says "one second remaining" and then seems to hang. I've tried this in Firefox and IE and I get the same problem. Could this be antivirus related (I'm running Avast)?
I've downloaded the file again, using mega.co.nz, and this time the download completed successfully.
I unzipped the ZIP file and copied the I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5 and the SS_DL.dll files to my C:\
I tried to open the ...tar.md5 file in 7zip but I get the following message:
"There is no correct record at the end of archive"
Does this mean the download failed (again)?
I tried to flash the file again on three different computers, with three USB cables (generic, official SGS2 cable, official SGS3 cable). I also tried all combinations of cable and computer and USB port.
Although the phone is detected by Odin - i get the "Added" message - it hangs every time on "SetupConnection.."
With Odin v3.04 I get this message:
<OSM> I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
With Odin v3.07 I get this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I can still get into the PhilZ recovery tool, and have access to the WanamLite 14.6 rom image on my external SD card. When I try to install this, I still get the foreign language "Samsung Galaxy" welcome message as before. I've tried so many things now, I have no idea if I'm rooted, not rooted, or what's going on.
Any further help, as ever, appreciated!
I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data).
Now i cannot reboot my phone and cannot connect it to the PC and Kies.
now how do i install android OS.
rohitmall10 said:
I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data).
Now i cannot reboot my phone and cannot connect it to the PC and Kies.
now how do i install android OS.
Click to expand...
Click to collapse
use odin to install your firmware
download odin (search in xda)
download your firmware( go to Samsung updates.com)=(search in google)
disable kies
then open odin
go to download mode on your phone by pressing home+power+ vol down
you will get a screen
press vol up you will go into download mode
connect your phone to pc
odin will show the port you connected
add the file you downloaded to pda in odin
the file normally should be a md5 or tar
then press start
when it finishes it will show pass and your phone will reboot
disconnect your phone and try again to mess it up
thanks
thanks for the help
please tell me something more that how can i upgrade my phone from android 2.3 to higher version.
or something else with my phone to improve its performance.
battery not showing correct status and USB function not working
i have recently factory reset and after which i am getting this problem of battery not showing correct status and USB function not working.
rohitmall10 said:
i have recently factory reset and after which i am getting this problem of battery not showing correct status and USB function not working.
Click to expand...
Click to collapse
how about you recalibrate your battery.... use your phone until its shutdown itself and charge it to 100% again....
rohitmall10 said:
thanks for the help
please tell me something more that how can i upgrade my phone from android 2.3 to higher version.
or something else with my phone to improve its performance.
Click to expand...
Click to collapse
CM 9 is available for ace duos(search on youtube), not so stable
CM 7.2 is also there with different mods(sd card not working, single sim)
for a stable one use A-droid and then flash DW ROM3.5
Samsung gt -s6802 ( sd card formated)
I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data). and formated sd card.
as you said in other post
I INSTALLED odin
disabled kies
then I opened odin
odin will showedthe port Iconnected
added the file i downloaded to pda in odin
when I press start
it shows
<OSM> Please wait..
<OSM> S6802DDMA1_S6802ODDLI4_S6802DDMA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
FAIL
PLEASE HELP ME SOLVE THE PROBLEM
baburadhakrishnan said:
I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data). and formated sd card.
as you said in other post
I INSTALLED odin
disabled kies
then I opened odin
odin will showedthe port Iconnected
added the file i downloaded to pda in odin
when I press start
it shows
<OSM> Please wait..
<OSM> S6802DDMA1_S6802ODDLI4_S6802DDMA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
FAIL
PLEASE HELP ME SOLVE THE PROBLEM
Click to expand...
Click to collapse
im facing the same problem have you found any solution till now ?
[GUIDE] A320FL Unlock Solution >> FRP >> Update >> Oreo >> Root + Debloat + Files
Hey Friends,
since i had some trouble with this Device, and even missed the Correct Files, i want to explain a Solution which worked for me.
First Update to the newest FW, download @Samobile or @samfrew
i had taken the DBT from Germany. [A320FLXXS3CRK1]
since you have updated to the Last FW the Device has Binary v.3. that means otherwise,
that you can use this Combination ROM with every other FW which is on Binary v.3
Enter Bootloader Mode and flash the FW with Odin 3.13.1 >> use - BL - AP - CP - HOME_CSC
When finished Booting up the Device, Power-Off, or Press Vol - Home and Power, till Bootloader Mode,
now just press once Vol +)
In Bootloader Mode, Flash now the Combination FW,
Flash the File in - AP -.
Reboot.
the Device Boots up, that usually takes some Time longer, dont worry, just listen to sum muzik..
.. now you are in Factory Mode, you have nothing to do here more, but feel free to look around.
when youre finished watching digits and technician stuff, power off the device and enter Bootloader Mode.
Back in Odin, switch back to the FW you have Downloaded before, flash again but only that files:
BL - AP - Home_CSC NOT CP !
Reboot Device, now you can see its usable again and no nagging setup procedere.
To finish the whole Process you have to power off the Device again and go in Bootloader Mode.
start Odin once again, now you flash all Files >> BL - AP - CP - Home-CSC
Thats it, setup your Device and enjoy.
#####
to Root it, do the following:
Open Odin 3.13.1, start Device in Bootloader Mode, in Odin under Options deactivate Reboot option.
Now Flash TWRP 3.2.3 Recovery in - AP -
Since Device wont reboot by itself, you have to push: Vol - Home Power Buttons till Display go off,
then fast switch your finger from Vol - to Vol + (keep other Buttons pressed)
now you enter TWRP Recovery.
here you swipe to allow changes in filesystem.
now check the Wipe Options and choose on the right side >> Data >> you have to write "yes" and the process starts.
when finished, connect the Device to your Laptop or Desktop,
now look @ your Device, you have to grand access the computer to use Filesystem of the Device.
Now copy the following files to Device:
1. decrypt fs script: no-verity-no-encrypt
2. to clean up a bit: debloat script
3. and of course: superuser
Install all Zip Files with Installer in Recovery. Do it in the Order like its written up there.
You can do the following (seem to TWRP has a Problem to save Settings, to solve, you can change to File Manager in TWRP
and give the Folder TWRP >> chmod 755, the move it from /sdcard to /
REBOOT.
If you like, now activate:
Developer Mode (click in Settings Device Info several times on Build Number to activate DevMode)
OEM Unlock
ADB Debugging
Now you can maybe Install:
BusyBox
FDroid
LuckyPatcher
AdAway ...
xposed Framework:
Installer: download
Framework v.90 beta 3: download
Install Framework zip in Recovery.
I hope i could help someone and appreciated to be part of this forum.
pS: its a pity that there so a little ammount of custom rom for this device out there.
I wish you all a very good start to the New Year!
..and always remember, there's nothing out there what we cannot solve!
Download All Files you need here:
Salut :highfive:
Cannot download files.
Thanks, forens1c!
I was ready to give your solution a try but unfortunately could not download any of the files from MEGA. It asks for a decryption key of which I am unaware.
Could you please help me.
Thank you.
fixed sorry
Zemont said:
Thanks, forens1c!
I was ready to give your solution a try but unfortunately could not download any of the files from MEGA. It asks for a decryption key of which I am unaware.
Could you please help me.
Thank you.
Click to expand...
Click to collapse
now it works sry.
Thank you
Yes, it works!
Thanks.
Another stupid question
Is it relevant that an external SD card is present in the phone during the flashing/rooting procedure?
Should I take it out or leave it?
Thank you.
Great stuff
It works very well. Thanks a lot!
Hello friends,
i have a problem with a Rev 3 firmware. I was not able to flash a combination rom. But this helped me. But anyway im stucked after this. I flash exactly how it is decriped here: BL - AP - Home_CSC NOT CP ! But as soon the device reboots there is written that it was a unallowed try to reset the phone. And i must go through the normal setup procedere.
I have no clue what is wrong or different. I tried at least 5 times with allways the same rresult. If someone has an idea...
Hi, why are there two firmwares ("stock" and "combination") that need to be flashed? Can I use just the stock firmware?
shears said:
Hi, why are there two firmwares ("stock" and "combination") that need to be flashed? Can I use just the stock firmware?
Click to expand...
Click to collapse
Combination file needs to be flashed first because it removes the frp lock.
After that, you flash the stock firmware because the combination firmware is only a repair/test type of rom, with limited functionality.
where can i get combination file for A320FLXXU3CRL1? i have passed the first step successfully. now i need the combination file to flash it in AP.
help pls
Hello forens1c,
thanks for your post, good and comprehensive! Just one thing that you might add for others, which have a sim lock on their devices as me.
It would be good to have a warning "Do not upgrade to the latest firmware unless needed!!", because you cannot downgrade the bootloader anymore.
If you are on U3 odr S3, 2 or 1 cannot be flashed.
Now I know, but it is already to late for me. But maybe for someone else!
All the best from Vienna,
Michael. (abokabadi at gmail com)
a3 2017 frp unlock
Thanks forensic,
at the end your guide wins!!!!
Thanks to Forensic:
https://forum.xda-developers.com/sa...20fl-2017-unlock-solution-frp-update-t3884971
I made here only just a few notes more…...
Enter Bootloader Mode and flash the FW with Odin >> use - BL - AP - CP – HOME_CSC
1)if flash with home_csc failed and you must flash only with Home
maybe you have next ROM release, like me, but not ok for frp unlock(use only HOME_CSC)!!
When finished Booting up the Device, Power-Off, or Press Vol - Home and Power, till Bootloader Mode, now just press once Vol +)
In Bootloader Mode, Flash now the Combination FW,
Flash the File in - AP -.
Reboot.
the Device Boots up, that usually takes some Time longer, dont worry.
.. now you are in Factory Mode(Combination rom), you have nothing to do here.
Back in Odin, switch back to the FW you have Downloaded before, flash again but only that files:
BL - AP - Home_CSC NOT CP !
Reboot Device, now you can see its usable again and no google FRP !!!!!!!.
2)only now you can see in download mode the famous little tiny letters:
FRP modeFF
before I always seen:
FRP MODE: ON
You have to understand that is not a clear procedure, and only at last, …..without hope, you can see the FRP mode: OFF.
To finish the whole Process you have to power off the Device again and go in Bootloader Mode.
start Odin once again, now you flash all Files >> BL - AP - CP - Home-CSC
Thats it, setup your Device and enjoy.
Use only the right file!!!
rom
DBT-A320FLXXS3CRK1-20181123100810
combination
COMBINATION_OXA_FA60_A320FLXXU3ARI1_OXAFAC_CL11575786_QB19737033_REV00_user_mid_noship.tar.md5
U3 with S3 remember
Worked like a Charm. Thanks!
Dont Know Why but didnt Work in Mine Case
1.Flashed Firmware
2.Flashed Combo
3.Flashed Firmware Without CP and HOME CSC
4. FRP Still ON
Member report as working solution but in mine case didnt work, strange
samMobile sucks with there payment... whats wrong with them? i cant get any fw with premium
martin_weber said:
samMobile sucks with there payment... whats wrong with them? i cant get any fw with premium
Click to expand...
Click to collapse
Try Updato.com or shell.boxwares.com
Updato for the newest and for different country / branding,
Boxware has Combination file ,Sboot, ENGboot, stock recovery, etc.
sometimes the DL speed is horrible sometimes you have it in a few minutes, you just have to try
or just google the AP like A320FLXXS3CRK! and you'll find enough sources with good download speed for free
martin_weber said:
samMobile sucks with there payment... whats wrong with them? i cant get any fw with premium
Click to expand...
Click to collapse
Use samfirm or frija for PC. It can download firmware at full speed.
abokabadi said:
Now I know, but it is already to late for me. But maybe for someone else!
Click to expand...
Click to collapse
Did you meanwhile found a combination firmware that works with latest bootloader updates ?
Unfortunately not flashable because bootloader version (3) is older than the one on the device (4). Is there a newer combination firmware?
I have been having no luck with an a320fl. any ideas why this is happening?
Edit: I was using the wrong version of odin. this has been solved.
this is what odin logs during a flash:
odin after flashing a firmware:
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1207)..
<ID:0/008> File analysis..
<ID:0/008> skip file list for home binary
<ID:0/008> sboot.bin.lz4
<ID:0/008> param.bin.lz4
<ID:0/008> cm.bin.lz4
<ID:0/008> boot.img.lz4
<ID:0/008> recovery.img.lz4
<ID:0/008> system.img.lz4
<ID:0/008> userdata.img.lz4
<ID:0/008> modem_debug.bin
<ID:0/008> cache.img.lz4
<ID:0/008> hidden.img.lz4
<ID:0/008> Home Binary Download
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response from boot-loader
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)