ANY ROMs FOR AN OEM A13 MID TABLET???? - Android Q&A, Help & Troubleshooting

Hey Everyone, I purchased this real cheap tablet from ebay a 7" A13 MID tablet (OEM), and was wondering if anyone knows anything about these tablets. I keep getting a FC error and would like to just wife the device and install a custom ICS rom to it.
Any assistance or info would be greatly appreciated. Thank you in advance for any help you can offer!

I also have a generic A13 MID tablet with ICS 4.03. It would be cool if someone created a CM9 rom for this soc. So far I only found this ROM here but I haven't tried it yet.

Thank you for the information, is there any info on how to install a custom rom on these devices?

Description is in that link, you need to use Live suite 1.09 (google it) and a valid image.

Thank you, I am going to give it a try.

a13
jfarhat said:
Thank you, I am going to give it a try.
Click to expand...
Click to collapse
You said you were going to have a try. Have you flased it yet? Plz post back. I need to flash mine too. need some expert advice..

horzz said:
You said you were going to have a try. Have you flased it yet? Plz post back. I need to flash mine too. need some expert advice..
Click to expand...
Click to collapse
Yeah, I tried it and it did not work. The ROM does not support the touch screen on the device. But in the thread, I found a lot of people that had this same problem. So, you will find there links to five other ROM that may work for you. I tried two of them and one of them the touch screen was slightly response, on my second ROM I got fully touch screen functionality. It seems to work well and better than the original ROM on the tablet. No forced close etc.... I have not tried the other ROMs yet, I might in the next few weeks.
the ROM that worked for me was the eliveupdate one. I have not yet tried the Teclast_p76TI-r1-3_4.03_GAPPS_r2 nor Teclast_p76TI-r4_4.03_GAPPS_r2. Also I have not yet tried the Tragidy-A13-Hyper-Jelly-404C-Mali.
I forget the name of the file that did not work but it started out with something like "soni----------". I already delete that file from my computer.
it is worth changing the ROM, the original ROM sucks big time and constantly would have errors, now the device is usable. While it is a low end device with low end specs.....it is a great device for my son (6 yrs old) and now it is fully functional without any errors popping up.
good luck!

momo stuff
jfarhat said:
Yeah,...... without any errors popping up.....good luck!
Click to expand...
Click to collapse
thanks.. but i already flashed it!! Was too curious..my first flash!
Every thing worked fine.. but the touch screen is responding in a reversed manner!! Suppose i touch the left, its sensing the right, n so on!
I am going to give a try to the others too.. n specially that you are using now.. are the sensors working on it fine??

horzz said:
thanks.. but i already flashed it!! Was too curious..my first flash!
Every thing worked fine.. but the touch screen is responding in a reversed manner!! Suppose i touch the left, its sensing the right, n so on!
I am going to give a try to the others too.. n specially that you are using now.. are the sensors working on it fine??
Click to expand...
Click to collapse
Well, that's the nice thing about flashing ROMs....if it doesn't work or you don't like it, you can always flash back to the original or another ROM.
The other ROMs on that site are better than the original ROM on the device and really help make the device usable. Good Luck!!

sorry forgot to mention that the sensors and everything seem to be working fine. I'll try the other three ROM later this weekend and let you know (if I actually get a chance to do so), how they worked...or didn't work.

jfarhat said:
sorry forgot to mention that the sensors and everything seem to be working fine. I'll try the other three ROM later this weekend and let you know (if I actually get a chance to do so), how they worked...or didn't work.
Click to expand...
Click to collapse
Will look forward to ya reply.
I have ordered an A13 9" tablet from DX.com. If it is anything like the one I bought for my mother I guess it will be and will need a good custom rom... ?

horzz said:
thanks.. but i already flashed it!! Was too curious..my first flash!
Every thing worked fine.. but the touch screen is responding in a reversed manner!! Suppose i touch the left, its sensing the right, n so on!
I am going to give a try to the others too.. n specially that you are using now.. are the sensors working on it fine??
Click to expand...
Click to collapse
Hi,
do you still have the stock rom? I accidentally deleted mine and now stuck with the reversed rom. Please help me, I've looked everywhere and couldn't find a single compatible rom.
If you do have it, please upload to a filesharing and email the link to [email protected].
Many thanks in advance for the help

abdinegoro said:
Hi,
do you still have the stock rom? I accidentally deleted mine and now stuck with the reversed rom. Please help me, I've looked everywhere and couldn't find a single compatible rom.
If you do have it, please upload to a filesharing and email the link to [email protected].
Many thanks in advance for the help
Click to expand...
Click to collapse
I don't still have the stock ROM but I found one on the thread link given above, that is much better and everything is working great on the device. I would suggest that you try one on this thread (if you have not already - it sounds like you may have already done so). That would be the only advise I can give you.
You could also try contacting the OP of that thread, he seems very well informed on ROM modifications, etc...but he also seems to be very busy with other projects and my not be able to give you much help...either way, it can't hurt to ask... Good Luck!
I would be glad to send you any of the ROMs that I have, but I do not believe they are the original ROM.

jfarhat said:
sorry forgot to mention that the sensors and everything seem to be working fine. I'll try the other three ROM later this weekend and let you know (if I actually get a chance to do so), how they worked...or didn't work.
Click to expand...
Click to collapse
please give the link for the working rom i need badly to flash my A13-MID tab
thanks

free007 said:
please give the link for the working rom i need badly to flash my A13-MID tab
thanks
Click to expand...
Click to collapse
If you have a dropbox or some other service, just share a folder with me (send me a messsage for my e-mail address) and I will place the ROMs that I have in that dropbox folder for you. Or you can just go through the link provided in one of the first few posts in this thread and then search that site.
http://www.androidtablets.net/forum...eneric-7-a13-android-4-0-4-hyper-edition.html

hey
is dere any one who coulls help me out
i m ussing worldtech pad888 a13 mid basedbtab tablet could some one help ..me to backup the stock rom ....
and provide me an update to costom rom ..
Sent from my A13-MID using xda app-developers app

a13 q88 mcbub mcpad yeahpad clone goodix touch
finally found a working rom (that isn't off center and has touch support), on the 26th try!
i purchased a mcpad f1 from mcbub.com early november 2012. i believe it has a goodix touch controller but i haven't done an lsmod so i'm not 100% sure. thank you for helping me out, jfarhat! here's my contribution to the internets. (aka more false leads! lol)
index.maixin-china.com/download/software/MaPan_MX713_Firmware_HG20121028.rar

chicoricochico said:
finally found a working rom (that isn't off center and has touch support), on the 26th try!
i purchased a mcpad f1 from mcbub.com early november 2012. i believe it has a goodix touch controller but i haven't done an lsmod so i'm not 100% sure. thank you for helping me out, jfarhat! here's my contribution to the internets. (aka more false leads! lol)
index.maixin-china.com/download/software/MaPan_MX713_Firmware_HG20121028.rar
Click to expand...
Click to collapse
That is great to see you got it working!

? Can the a13 be flashed to run windows 8 ?
Hi xda I just wunted to no if I could install window 8 not the phone or tablet rom but the 34 bit I no the q88 has anuff space for the os if anyone could help I will test on my q88 a13 boxchip nicknamed crybaby lol

Need Help!
jfarhat said:
Yeah, I tried it and it did not work. The ROM does not support the touch screen on the device. But in the thread, I found a lot of people that had this same problem. So, you will find there links to five other ROM that may work for you. I tried two of them and one of them the touch screen was slightly response, on my second ROM I got fully touch screen functionality. It seems to work well and better than the original ROM on the tablet. No forced close etc.... I have not tried the other ROMs yet, I might in the next few weeks.
the ROM that worked for me was the eliveupdate one. I have not yet tried the Teclast_p76TI-r1-3_4.03_GAPPS_r2 nor Teclast_p76TI-r4_4.03_GAPPS_r2. Also I have not yet tried the Tragidy-A13-Hyper-Jelly-404C-Mali.
I forget the name of the file that did not work but it started out with something like "soni----------". I already delete that file from my computer.
it is worth changing the ROM, the original ROM sucks big time and constantly would have errors, now the device is usable. While it is a low end device with low end specs.....it is a great device for my son (6 yrs old) and now it is fully functional without any errors popping up.
good luck!
Click to expand...
Click to collapse
I have a AnnPad A13-MID and I already flashed the rom but had no luck. It is now in a different language and the touch screen is all messed up. I also did not backup the original stock rom and didn't know how to. Can you please send me a link to the rom you used or if you know of any that will work with my specific model I have. Any help from you or anyone who knows about doing this stuff would be greatly appreciated! Thank you for your help!

Related

[Q] FLYTOUCH 8 or SuperPad VIII need rom ICS

I looking for software ICS on my tablet "FLYTOUCH 8 or SuperPad VIII"
I searched the internet and have found nothing.
Any member can help me please...?
What exactly are you looking for? It runs ICS already (at least, mine did). What version is yours running now?
Also, what do you see when you run Hardware Info (or other hardware apps)? I was told it's a 1.5GHz CPU, but mine reports 1GHz. SetCPU (and similar apps) show 1GHz is the max as well so I can't really overclock it...
I've been looking for anyone who is doing a JB ROM for it, but no luck so far.
Hi i also sarching same And how can overclack to 1.5Ghz
Sent from my LG-P350 using xda premium
Hi , how I can enter in recovey mode? I'm pressing nav, (the esquared one on the screen) home button and power and always boot onnormal mode
screech101 said:
What exactly are you looking for? It runs ICS already (at least, mine did). What version is yours running now?
Also, what do you see when you run Hardware Info (or other hardware apps)? I was told it's a 1.5GHz CPU, but mine reports 1GHz. SetCPU (and similar apps) show 1GHz is the max as well so I can't really overclock it...
I've been looking for anyone who is doing a JB ROM for it, but no luck so far.
Click to expand...
Click to collapse
Screech, where did you get the ICS firmware from? I need to repair a friend's pad, but I can NOT find a suitable ROM anywhere!
i have stock flytouch 8 4.0.4 ics
skoop99 said:
Screech, where did you get the ICS firmware from? I need to repair a friend's pad, but I can NOT find a suitable ROM anywhere!
Click to expand...
Click to collapse
i have it but its far to big to put on here i can email it to anyone who wants it but i got it from where i bought my tablet its got live suite and instructions aswell. i am looking for a way to root mine but keep messing it up does anyone have a way?
Bc1003 Rom
thumper22 said:
i have it but its far to big to put on here i can email it to anyone who wants it but i got it from where i bought my tablet its got live suite and instructions aswell. i am looking for a way to root mine but keep messing it up does anyone have a way?
Click to expand...
Click to collapse
I would like to get that rom as well. I have the same tablet. My email is [email protected]. Thanks.
thumper22 said:
i have it but its far to big to put on here i can email it to anyone who wants it but i got it from where i bought my tablet its got live suite and instructions aswell. i am looking for a way to root mine but keep messing it up does anyone have a way?
Click to expand...
Click to collapse
I need the same thing too, my email is [email protected]
Thank you!
thumper22 said:
i have it but its far to big to put on here i can email it to anyone who wants it but i got it from where i bought my tablet its got live suite and instructions aswell. i am looking for a way to root mine but keep messing it up does anyone have a way?
Click to expand...
Click to collapse
I need this rom too. My e-mail is [email protected]
thank you
papajbill21 said:
I need this rom too. My e-mail is [email protected]
thank you
Click to expand...
Click to collapse
I have just started making a rom for this tablet. Its going to be based on the stock rom, with all the crapware and bloat removed. And tweek it etc... just need a name I was thinking superfly? Not sure if used
I plan on pre rooting and porting cwm, anymore suggestions welcome
For those wanting the original firmware, I will post it to my dropbox account tomorrow (24th), into my public folder along with the update utility. And hopefully some news on a flytouch 8 custom rom.
Sorry for the time delay, been a tad busy.
anyhoo here the original rom and flashtool. http://d-h.st/fho
OverRipeBananas said:
Sorry for the time delay, been a tad busy.
anyhoo here the original rom and flashtool. http://d-h.st/fho
Click to expand...
Click to collapse
so, basically, this is from their web site? any news on building custom rom?
Just wanted to say thanks to those who are working on this.
OverRipeBananas said:
Sorry for the time delay, been a tad busy.
anyhoo here the original rom and flashtool. http://d-h.st/fho
Click to expand...
Click to collapse
As this flashea already solved thank you very much
Help me please!
hello everyone, i`m new member, i see that someone had a rom for superpad 8 and i really need these...
i prey you to send me...please...my e-mail is [email protected].
thank you however. bye
OverRipeBananas said:
For those wanting the original firmware, I will post it to my dropbox account tomorrow (24th), into my public folder along with the update utility. And hopefully some news on a flytouch 8 custom rom.
Click to expand...
Click to collapse
Thank you very much for this. The manufacturer's website was woeful.
thumper22 said:
i have it but its far to big to put on here i can email it to anyone who wants it but i got it from where i bought my tablet its got live suite and instructions aswell. i am looking for a way to root mine but keep messing it up does anyone have a way?
Click to expand...
Click to collapse
please, can you email me this rom, i get brick and can't find rom for flytouch 8
Help needed from an old post
Hi all,
I've recently bought a Flytouch 8 for my young daughter, but the tablet seems to be stuck loading. It loads upto the android screen and seems to loop. I've tried to press and hold "power and menu" to no avail. I've even tried other buttons in the hope it'll work but still nothing.
I'm guessing that I need to reinstall the firmware but I have no idea how. Any help you could give would be appreciated!
Thanks in advance!!
oleg_lap said:
please, can you email me this rom, i get brick and can't find rom for flytouch 8
Click to expand...
Click to collapse
[email protected].. thats the e-mail. hit me with the link. thankx
---------- Post added at 12:33 AM ---------- Previous post was at 12:32 AM ----------
OverRipeBananas said:
For those wanting the original firmware, I will post it to my dropbox account tomorrow (24th), into my public folder along with the update utility. And hopefully some news on a flytouch 8 custom rom.
Click to expand...
Click to collapse
[email protected]. thats the email hit me with the link. thank u

Read please! Can anyone make rom for N9389/ HDC GALAXY S3 LEGEND?

So the first person who makes completely working miui or cm10.1 or both will get 100-150 dollars
Sent from my Samsung Galaxy SIV using xda app-developers app
gogozx said:
So the first person who makes completely working miui or cm10.1 or both will get 100-150 dollars
Sent from my Samsung Galaxy SIV using xda app-developers app
Click to expand...
Click to collapse
does this offer still stand?
If so, I will give it a go.
OpenMinded said:
does this offer still stand?
If so, I will give it a go.
Click to expand...
Click to collapse
Yes, it still stands, but i found out that CM10.1 is currently impossible to make, so you can try with MIUI V5.
gogozx said:
Yes, it still stands, but i found out that CM10.1 is currently impossible to make, so you can try with MIUI V5.
Click to expand...
Click to collapse
so how did you make the nexus rom for it?
The issue is that I do not own the phone, but I am looking at porting CM to MTK6589.
MIUI porting is a bit different, it would not involve kernel compiling per se I believe (CM either, but I would like to).
To give it a go, I would need info from here:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
So your ROM version, partition info etc.
When I manage to port to a device I own, I can give it a go.
OpenMinded said:
so how did you make the nexus rom for it?
The issue is that I do not own the phone, but I am looking at porting CM to MTK6589.
MIUI porting is a bit different, it would not involve kernel compiling per se I believe (CM either, but I would like to).
To give it a go, I would need info from here:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
So your ROM version, partition info etc.
When I manage to port to a device I own, I can give it a go.
Click to expand...
Click to collapse
It's not really Nexus ROM, it's just stock ROM modified to look like stock Android.
I have Android 4.2.1
I will PM you the partition info.
gogozx said:
It's not really Nexus ROM, it's just stock ROM modified to look like stock Android.
I have Android 4.2.1
I will PM you the partition info.
Click to expand...
Click to collapse
Just started with practicing on my Nexus 7 . I ordered the same model as well, N9389.
I also have a N9599, let's see how far I get .
OpenMinded said:
Just started with practicing on my Nexus 7 . I ordered the same model as well, N9389.
I also have a N9599, let's see how far I get .
Click to expand...
Click to collapse
Wow, it seems that you have alot of money to order it just because you want to develop ROM for that phone.
Good luck man, if you need any help message me
gogozx said:
Wow, it seems that you have alot of money to order it just because you want to develop ROM for that phone.
Good luck man, if you need any help message me
Click to expand...
Click to collapse
Well, not really, but I like to spend money on those things.
When the ROM works I'll sell it .
Well dump info and the stuff on the CM porting page is still usefull.
cheers
OpenMinded said:
Well, not really, but I like to spend money on those things.
When the ROM works I'll sell it .
Well dump info and the stuff on the CM porting page is still usefull.
cheers
Click to expand...
Click to collapse
I will be testing those ROMs that you make for N9389, is it OK?
gogozx said:
I will be testing those ROMs that you make for N9389, is it OK?
Click to expand...
Click to collapse
If I manage to make something working, sure !
OpenMinded said:
If I manage to make something working, sure !
Click to expand...
Click to collapse
i compiled my first recovery based on cm 10.1 for Thl W8.
I have no easy way to push the image to the phone to test.
If it works, I can start to create a recovery for this phone based on sources.
I would need that info I requested.
Are you able to post the build.prop file and the partition dump?
Look at the page with instructions I posted earlier.
Meantime I look for an easy way to flash that recovery, somehow sp flashtool does not read the scatter file created by mtkdroidtools .
cheers
managed to flash it, but it does not work , just a black screen .
Harder than it looks.
Can't promise anything, but I'll post if I get further.
Compiling on an old C2D now, so it takes time .
OpenMinded said:
managed to flash it, but it does not work , just a black screen .
Harder than it looks.
Can't promise anything, but I'll post if I get further.
Compiling on an old C2D now, so it takes time .
Click to expand...
Click to collapse
Even if you failed, thank you for trying and i hope you will make it
gogozx said:
Even if you failed, thank you for trying and i hope you will make it
Click to expand...
Click to collapse
you are welcome .
I do still need the information I mentioned once I get it working.
Especially the partition info is important.
You may always hit the thanks button when you are happy .
I am currently working on CWM 6 to get working.
I'll post when I have progress (or when I quit ).
You can always give it a go yourself:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
cheers!
OpenMinded said:
If I manage to make something working, sure !
Click to expand...
Click to collapse
So, like I requested before, please :
- post your build.prop file
- post identification stuff of the device, like screen resolution, memory and recovery.fstab (or the recovery image)
- in general take a look at the link I posted before and read it, so you know what info is needed :
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
The reason I ask is because there are at leat 2 different versions, 1 had 960x480 screen and 1/4gb ram/rom, the other 1280x720 and 2/8.
They obviously at least have different partitions and displays and perhaps even other different hardware.
You can also post a full working ROM on dropbox or something.
thanks
P.S. for the needed tools, see here:
http://forum.xda-developers.com/showpost.php?p=44096751&postcount=371
This is a CWM 6.0.3.3 which works on my device.
Use SP Flash Tools 3.13 something to flash.
My scatter file is attached, please compare it with yours.
Needless to say perhaps, but still: this is on your own risk.
You may damage your device if you do not know what you are doing.
Bricking it is not my fault!
So think before you act.
If you try: please give feedback if it works.
If does it is the same device: N9389 5.3", 960x480 (qHD) , 1 gb ram, 4 gb rom.
Device identifier: v89_gq2002s
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P2, 2013/03/26 12:42
cheers!
OpenMinded said:
This is a CWM 6.0.3.3 which works on my device.
Use SP Flash Tools 3.13 something to flash.
My scatter file is attached, please compare it with yours.
Needless to say perhaps, but still: this is on your own risk.
You may damage your device if you do not know what you are doing.
Bricking it is not my fault!
So think before you act.
If you try: please give feedback if it works.
If does it is the same device: N9389 5.3", 960x480 (qHD) , 1 gb ram, 4 gb rom.
Device identifier: v89_gq2002s
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P2, 2013/03/26 12:42
cheers!
Click to expand...
Click to collapse
OK, thank you man but i already have CWM :/
Anyways yes that is my phone
And here is the stock ROM
http://www.needrom.com/mobile/star-n9389/
gogozx said:
OK, thank you man but i already have CWM :/
Anyways yes that is my phone
And here is the stock ROM
http://www.needrom.com/mobile/star-n9389/
Click to expand...
Click to collapse
You have CWM 6 already? If you are sure, I will continue.
OpenMinded said:
You have CWM 6 already? If you are sure, I will continue.
Click to expand...
Click to collapse
I'm sure You have no idea how happy i am now, you honestly make me happy because you try so hard for person that you don't even know DD
gogozx said:
I'm sure You have no idea how happy i am now, you honestly make me happy because you try so hard for person that you don't even know DD
Click to expand...
Click to collapse
Hi,
Well I am partly motivated by your offer, but I enjoy Android and Linux hacking.
Let's hope those attempts will lead to something.
How about LewaOS? There are good porting guides for that.
I will try to look for MIUI or CM in the weekend.
Initial CM would miss dual sim support.
Maybe MIUI is easier, because some work has been done.
Well, I'll see.
Don't overestimate the complexity, if you have CM 6 and made it yourself, porting a rom is doable I suppose ?
cheers

[Q] Help need Official Rom EFOX Smart e4 (S4 Clone)

Hélio Guys,
Does anyone have this phone to help me with a copy of the original Rom or does anyone know where can I find a Official Rom for this device?
Don't try to use Rom's of the device No1 S6 because they are note the some, my mustake.
Thank you
Hello guys can someone help?
Enviado do meu S6 através de Tapatalk
Hello,
Check this site. You will find all you need.
d-h.st/users/Mobishare.de
Cheers
PresarioPT said:
Hélio Guys,
Does anyone have this phone to help me with a copy of the original Rom or does anyone know where can I find a Official Rom for this device?
Don't try to use Rom's of the device No1 S6 because they are note the some, my mustake.
Thank you
Click to expand...
Click to collapse
you can find all the files about smart e4 in my blog, wish it could help you ,my friend.
iamwrong said:
you can find all the files about smart e4 in my blog, wish it could help you ,my friend.
Click to expand...
Click to collapse
Can you send me the address?
Hi,
See a few posts before or use needrom.com to find the latest rom.
Cheers
Display Problem
hi guys,
After flashing, this Mobile: EFOX SMART E4 MTK6589 Quad Core Android 4.2 5.0 Polegadas Smartphone
I found a big problem ... the phone starts up, I can hear the sounds but not display anything, the display lights up but remains black. I tried to flash different rom, but the result does not change.
I hope you can help me. thank you very much
mabinoguion said:
hi guys,
After flashing, this Mobile: EFOX SMART E4 MTK6589 Quad Core Android 4.2 5.0 Polegadas Smartphone
I found a big problem ... the phone starts up, I can hear the sounds but not display anything, the display lights up but remains black. I tried to flash different rom, but the result does not change.
I hope you can help me. thank you very much
Click to expand...
Click to collapse
I have the same problem after flashing the Efox E4 with a custom rom. I tried the original rom as well and I got the same problem!! Please help!
Hi,
Wrong or missing LCD driver, i guess. Re-try replacing boot.img and/or uboot.img from your stock recovery or backup.
Which rom did you try to flash?
mabinoguion said:
hi guys,
After flashing, this Mobile: EFOX SMART E4 MTK6589 Quad Core Android 4.2 5.0 Polegadas Smartphone
I found a big problem ... the phone starts up, I can hear the sounds but not display anything, the display lights up but remains black. I tried to flash different rom, but the result does not change.
I hope you can help me. thank you very much
Click to expand...
Click to collapse
Has anyone fixed this problem. I could do with a little help... my E4 is working, but with black screen...
Well, I've fixed my problem...
Sent from my NX503A using XDA Free mobile app
Pudredo said:
Well, I've fixed my problem...
Sent from my NX503A using XDA Free mobile app
Click to expand...
Click to collapse
Hello.
Can you explain how did you fixed it?
I'm banging my head against the wall to fix this :S
There are two versions of the efox e4. The ROMs you find on the NET are for the first one and you, like me, must have the second. I've copied the ROM from another phone and flashed it on mine.
I've been thinking of posting it on needrom, but haven't done it yet.
Pudredo said:
There are two versions of the efox e4. The ROMs you find on the NET are for the first one and you, like me, must have the second. I've copied the ROM from another phone and flashed it on mine.
I've been thinking of posting it on needrom, but haven't done it yet.
Click to expand...
Click to collapse
Oh, I see. Thank you for replying.
I don't want to bother you but can you upload it then?
Since evey rom on the net are for the first one I will never manage to fix this without your rom :S
I'll fins a way to get to you this weekend. As soon as i do, i'll post it here.
Hope it helps.
Pudredo said:
I'll fins a way to get to you this weekend. As soon as i do, i'll post it here.
Hope it helps.
Click to expand...
Click to collapse
Thank you.
I really appreciate it.

Ported CM 12 for htc desire 610.

Hey guys i have ported CM12 rom for the desire 610 , i am not sure whether it ll work,i need some ome to test it....99% it wont work slim chance of working...it may even brick your phone......so i am not responsible for bricking your device....flash it on your own risk....
if anyone is intrested to test it, pm me.
THIS ROM IS NOT TESTED. NEED TESTERS.
Test rom
Ill give it a go for ya.
spade2be said:
Ill give it a go for ya.
Click to expand...
Click to collapse
+1 I sent a PM to the OP
Post a link for us to try?
zubairali00 said:
Post a link for us to try?
Click to expand...
Click to collapse
Send the OP a private message and he'll give you the link.....anyone tried it yet?!
i am interested in testing your ROM, i sent a PM to you....
thank you...
-Jack
yellow01gt said:
i am interested in testing your ROM, i sent a PM to you....
thank you...
-Jack
Click to expand...
Click to collapse
There is a link to it in it's Q&A thead here
http://forum.xda-developers.com/showpost.php?p=61233988&postcount=9
But it's not a TWRP compatible install.zip so be carefull.
MiniBlu
MiniBlu said:
There is a link to it in it's Q&A thead here
http://forum.xda-developers.com/showpost.php?p=61233988&postcount=9
But it's not a TWRP compatible install.zip so be carefull.
MiniBlu
Click to expand...
Click to collapse
thank you for the link, i had already found it. i downloaded and installed, unfortunately i did not realize it was not TWRP compatible....so, back to square one....er, square two i guess...
thanks again
--Jack
How do you install it when it is not TWRP compatible ?
Lol most exciting thread ever on this device
noobtxtech said:
Lol most exciting thread ever on this device
Click to expand...
Click to collapse
Lol! I think just about any other xda forum wouldve come to the conclusion that this one's a dud and moved on by now (probably to a different custom rom). But we're so hopeful to get something working on this phone that we'll embrace the illusion a little longer. Its not a put down because i keep coming back to see eventhough i know if it worked we wouldve been aware probably on day one...certainly by day 7.
KLit75 said:
Lol! I think just about any other xda forum wouldve come to the conclusion that this one's a dud and moved on by now (probably to a different custom rom). But we're so hopeful to get something working on this phone that we'll embrace the illusion a little longer. Its not a put down because i keep coming back to see eventhough i know if it worked we wouldve been aware probably on day one...certainly by day 7.
Click to expand...
Click to collapse
Yeah I'm still holding my breath only to make my wife's phone fully functional....if I had the extra cash then I would've bought her something a little better already
I'll give it a test too!
I'll test it!!
This ROM doesn't work..
No use in testing
http://forum.xda-developers.com/desire-610/orig-development/rom-cyanogenmod-11-0-t3266321
working rom

About Android Porting

Guys, i've tried to port a j500fn rom to a j510FN, and everything worked out pretty well. Most of the things were working and everything was fine. I tried to use the camera but I remembered I forgot to change some files. I changed those files and I double-checked if I missed any bad files. I reflashed the ROM, everything was working but guess what, camera still didn't work. I changed the base ROM, still no result, I searched for a tutorial to see if I missed any file, and i didn't. I don't know what went wrong, can you guys help me? The rom was Validus 8.1 (Unofficial).
DankMemz said:
Guys, i've tried to port a j500fn rom to a j510FN, and everything worked out pretty well. Most of the things were
...
the base ROM, still no result, I searched for a tutorial to see if I missed any file, and i didn't. I don't know what went wrong, can you guys help me? The rom was Validus 8.1 (Unofficial).
Click to expand...
Click to collapse
Hi there,
Porting is buggy, you have really many bugs to deal with, moreover there aren't so many tutorials on how to do that and fix errors.
I'll advice you to check how to build a ROM from source. That's the easiest way to do because you'll have less bugs to deal with, and there are tons of tutorial about that.
Here is one of the most complete.
https://forum.xda-developers.com/chef-central/android/guide-android-rom-development-t2814763
It's getting old but it's still fine, and XDA is filled with those kind of tutorial , go search the forum for other tutorial.
Have fun !
RaiZProduction said:
Hi there,
Porting is buggy, you have really many bugs to deal with, moreover there aren't so many tutorials on how to do that and fix errors.
I'll advice you to check how to build a ROM from source. That's the easiest way to do because you'll have less bugs to deal with, and there are tons of tutorial about that.
Here is one of the most complete.
https://forum.xda-developers.com/chef-central/android/guide-android-rom-development-t2814763
It's getting old but it's still fine, and XDA is filled with those kind of tutorial , go search the forum for other tutorial.
Have fun !
Click to expand...
Click to collapse
Thx for advice, but i really want to finish porting this rom, because I worked pretty hard on it..
DankMemz said:
Thx for advice, but i really want to finish porting this rom, because I worked pretty hard on it..
Click to expand...
Click to collapse
Oh I see, unfortunately I can't help you for this particular issue , sorry.
RaiZProduction said:
Oh I see, unfortunately I can't help you for this particular issue , sorry.
Click to expand...
Click to collapse
I eveb replaced the whole Vendor folder, and still didn't work ....

Categories

Resources