I rooted my phone and just tried reseting the binary counter for att and now it will not turn on or go in to download mode.
Any ideas how to unbrick it?
lampsoccer1409 said:
I rooted my phone and just tried reseting the binary counter for att and now it will not turn on or go in to download mode.
Any ideas how to unbrick it?
Click to expand...
Click to collapse
buy an jig of ebay and pop it in...it should go to download mode....and flash stock firmware with odin and youll be back in no time....
even if I the computer wont recognixe it, it wont power on, go into recovery or download mode...
the jig will still work, what happens if it doesnt work?
More than likely the jig will work.....but if it doesn't its time to visit the store my friend.....but I'm sure the jig will do the trick
Sent from my GT-I9300 using xda premium
when i plug it in my computer, it doesnt recognize it but it still is coming up as some sort of a usb drive, is that good?
lampsoccer1409 said:
when i plug it in my computer, it doesnt recognize it but it still is coming up as some sort of a usb drive, is that good?
Click to expand...
Click to collapse
If Odin recognizes it you're good
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
lampsoccer1409 said:
when i plug it in my computer, it doesnt recognize it but it still is coming up as some sort of a usb drive, is that good?
Click to expand...
Click to collapse
make sure you have it charged, let it sit for a few hours...
try different usb
try different cable
try uninstalling drivers and reinstall ....see my page links for GNote for drivers
try another computer
. . . and pray.
If you try to boot your phone and you anykind of boot up logo or Samsung logo then your in good shape. Just look for the video on YouTube how to put phone in a download mode put the stock rom and root the phone again.
If I or anyone else have helped you in any kind of way please press THANK YOU button.
Your fine..use a jig man you will be surprised .I wouldn't trip
Sent from my SAMSUNG-SGH-I717 using xda premium
im buying the usb jig, and it wont boot at all...
if not i found a company that can fix the phone, thanks for all the help
lampsoccer1409 said:
when i plug it in my computer, it doesnt recognize it but it still is coming up as some sort of a usb drive, is that good?
Click to expand...
Click to collapse
Try flashing stock rom thru Odin even if it does not show it is recognized, some people have had luck doing that.
Sent from my Termi "NOTE" r
att galaxy note2 uclaj2 stock rom - odin
is there a link for an att galaxy note2 uclaj2 stock rom that can be flashed by odin ?
my note i717 says format disk when i connect to the computer
alewis2k12 said:
More than likely the jig will work.....but if it doesn't its time to visit the store my friend.....but I'm sure the jig will do the trick
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
can i use a jig to get into download mode
sri.nafi said:
can i use a jig to get into download mode
Click to expand...
Click to collapse
You've revived 3 different threads that had been dead for over 5 months..
Please use google. All your questions are answered in the threads.
No need to bring up old ones back up
Here I'll help you out
WWW.Google.com
Use it
Sent from an ATM machine
armyboy11b said:
Your fine..use a jig man you will be surprised .I wouldn't trip
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
let us know what happens. pray
lampsoccer1409 said:
I rooted my phone and just tried reseting the binary counter for att and now it will not turn on or go in to download mode.
Any ideas how to unbrick it?
Click to expand...
Click to collapse
lampsoccer1409 said:
when i plug it in my computer, it doesnt recognize it but it still is coming up as some sort of a usb drive, is that good?
Click to expand...
Click to collapse
I'm confused , if it doesn't turn on, how does it come up as a USB when you connect it to a PC?
armyboy11b said:
Your fine..use a jig man you will be surprised .I wouldn't trip
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Unless I'm sorely mistaken,
We figured out about a day after it came out that they don't work. Do a search for the first month after the phone came out. March 2012
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
Jamesyboy said:
Unless I'm sorely mistaken,
We figured out about a day after it came out that they don't work. Do a search for the first month after the phone came out. March 2012
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
Click to expand...
Click to collapse
They do work. They won't work on a hard bricked note though.
rquiett said:
They do work. They won't work on a hard bricked note though.
Click to expand...
Click to collapse
Buddy, I think you have the magic jig.
But I hear that's what all the girls say.
Related
Hi all.
I got my ACE last week and playing around with it.
I installed ROM manager was browsing through the models and by mistake I clicked Huawei Pulse and bricked my phone.
The 3 button press for download mode will not work.
If I use a jig will I be able to get in download mode?
Thanks
Can u log in via adb?
Sent from my GT-S5830 using xda premium
take battery out, then press 3 buton combo then put the battery in the same time then downlaod mode should come then flash your rom
djsky2011 said:
Can u log in via adb?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
The bad news is my main PC is down and i am using a very limited laptop without admin rights, so I can't install or do anything.
I am supposed to get parts to build a new machine some time next week.
aboobakr said:
take battery out, then press 3 buton combo then put the battery in the same time then downlaod mode should come then flash your rom
Click to expand...
Click to collapse
Nope the 3 button press doesn't work.
I just wanted to know if the jig will help me get in to download mode.
I think the jig will help.
consegregate said:
I think the jig will help.
Click to expand...
Click to collapse
Thanks I will order it today and I really hope it works.
Well I built my own jig and no dice.
So I took the phone back and told the guy that I don't know what happened and they replaced it no charge.
does anyone know how i can restore my phone? i flashed a voodoo kernel to it before rooting, and now its bricked. does anyone have the factory kernel laying around?
Thanks
What method did you try when putting the kernel on? Did you use Odin?
Sent from my SCH-I500 using XDA App
cschrauw said:
does anyone know how i can restore my phone? i flashed a voodoo kernel to it before rooting, and now its bricked. does anyone have the factory kernel laying around?
Thanks
Click to expand...
Click to collapse
look up my guide in general section...section 4
i looked at that, i also can only get into recovery mode, not download
droidstyle said:
look up my guide in general section...section 4
Click to expand...
Click to collapse
it's possible to access the sd card from the recovery menu, what should be on the sd card to fix it? the .md5 file?
cschrauw said:
i looked at that, i also can only get into recovery mode, not download
Click to expand...
Click to collapse
Try removing the battery completely, then hold down the down volume key and plug the USB cord in and don't let go until it's in download mode. Then replace the battery into the phone. This method has always worked for me. Hopefully it does for you too
Sent from my SCH-I500 using XDA App
kadin.zimmerman said:
Try removing the battery completely, then hold down the down volume key and plug the USB cord in and don't let go until it's in download mode. Then replace the battery into the phone. This method has always worked for me. Hopefully it does for you too
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
how long does it usuall take for you? i tried for about 5 mins and nada haha
Be sure you have drivers from Sanding installed on PC....also the USB cable is correct.. ( some charge phone just fine, but don't work for ODIN. ).... OH, " wiggle" cable...I know sounds odd but do it...I've. Had happen with mine
Sent from my SCH-I500 using XDA App
Lol dam auto correct! SAMSUNG NOT SANDING! !!!!!
Sent from my SCH-I500 using XDA App
cschrauw said:
how long does it usuall take for you? i tried for about 5 mins and nada haha
Click to expand...
Click to collapse
Usually takes 10 seconds lol yeah make sure the computer has Samsung drivers installed and try the OEM USB cord. Although I have used non OEM cords before and worked just fine... I'm very very surprised that taking the battery out, then holding the down key and plugging in simultaneous didn't work.
Sent from my SCH-I500 using XDA App
icemanwbs said:
Lol dam auto correct! SAMSUNG NOT SANDING! !!!!!
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
You do know there's an edit button on your posts right?
I have a Galaxy SII LTE HD from BELL. i757.
I succeeded in rooting the phone and instaling a cook ROM (cyanogenmod). Everything worked well.
Sadly, this morning, I've decided to push my luck forward and I tried to install another ROM wich is not eactly made for my phone (i757) but really near (I9100). It's the Slim ROM. Then after the installation, the phone didn't respond anymore. No booting, not event in recovery mode, only black screen like there's no juice in it anymore. I've tried to remove battery and put it back, I've tried to plug the phone directly on the wall. Nothing. The void ! It seemed totally dead. I've tried to do a soft then a hard reset. Nothing works.
I've bough the phone from somedy else so the company (BELL) won't repair it for free.
Do someone have an idea.
Any help will be really appreciate. :fingers-crossed:
Try to boot into Download mode and flash a different rom
Sent from my GT-I9100 using Tapatalk 2
Hard brick baby!
Sent from my GT-I9100 using Tapatalk
praveenthivari said:
Try to boot into Download mode and flash a different rom
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I can't boot in download mode. Thank's anyway.
Try using a USB Jig.. it can get u into download mode..
If my post helped, don't mind hitting THANKS
Rickforet said:
I can't boot in download mode. Thank's anyway.
Click to expand...
Click to collapse
try with a 'USB jig' for dwnld mode, if the same (USB jig) fails then Only a Jtag can save u
UnwiredDroid said:
Hard brick baby!
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
what's a Hard brick. Does it means I've killed my phone ?
Rickforet said:
what's a Hard brick. Does it means I've killed my phone ?
Click to expand...
Click to collapse
hardbrick= damaged motherboard
ps- try an USB jig which is available cheaply on Ebay.com and see if it can put ur phone into dwnld mode
drakester20 said:
Try using a USB Jig.. it can get u into download mode..
If my post helped, don't mind hitting THANKS
Click to expand...
Click to collapse
By "USB jig" do you mean holding volume down while connecting to USB ? If so, I've tried it but nothing happens.
Rickforet said:
By "USB jig" do you mean holding volume down while connecting to USB ? If so, I've tried it but nothing happens.
Click to expand...
Click to collapse
no ma8 USB Jig is a small tool that can aid in putting ur phone into dwnld mode
search for the same in Ebay.com
also u can check the link below where there is a list of people having USB jig with them , see if any body close to ur place is listed in it, so that u can borrow from them and try it
Borrow USB jig near u
Rickforet said:
By "USB jig" do you mean holding volume down while connecting to USB ? If so, I've tried it but nothing happens.
Click to expand...
Click to collapse
No, USB jig is sort of USB connector which when connected force the phone to download mode. Search on eBay you'll find it.
Sent from my GT-I9100 using xda app-developers app
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/
Here some info on USB jig...and how its so easy to make your own....if your too tight to pay the couple of dollars/pounds on ebay
Sent from my GT-I9100 using xda premium
Sun90 said:
try with a 'USB jig' for dwnld mode, if the same (USB jig) fails then Only a Jtag can save u
Click to expand...
Click to collapse
aht is a Jtag ?
I am not sure... correct me if I am wrong..
According to me JTAG is your phone's motherboard..
If my post helped, don't mind hitting THANKS
JTAG is the only way to get your phone up and running again, a USB Jig will not help with a brick like yours... Find a JTAG repair service near you...
JTAG is a way to program dead boards, it can either be soldered to your PCB, or the service center can use JTAG Jigs which is far easier to use, but JTAG jigs is not available for all phones yet...
Hope this will help you a bit
Best regards
There's a high chance that the USB Jig won't force your phone into download mode. Next option would be to think about a JTag. There is a website famous for Samsung repairs: mobiletechvideos.com. They are based in the USA and have a good success rate, but if the motherboard was damaged during flashing, JTag won't revive it. Next option after that would be a replacement motherboard, I'm not sure if you would contact your service provider or Samsung. Good luck either way.
Sent from my GT-I9100 using xda app-developers app
So i was attempting to root this thing and put a fancy new rom on it, but have got lost along the way and now the phone will not boot into download or recovery modes. It just says Samsung Vibrant and stays there until I pull the battery. I am unable to do the key combos for any of the modes. The only way I could get into recovery was through adb command. But now I cant even do that. Any suggestions or should I just throw it in the can! Thanks
MikePysh said:
So i was attempting to root this thing and put a fancy new rom on it, but have got lost along the way and now the phone will not boot into download or recovery modes. It just says Samsung Vibrant and stays there until I pull the battery. I am unable to do the key combos for any of the modes. The only way I could get into recovery was through adb command. But now I cant even do that. Any suggestions or should I just throw it in the can! Thanks
Click to expand...
Click to collapse
you can use odin.. flash it back to stock.. just use search button.. I did it many times so it safe as long as you pay attention to instructions..
alkaid14 said:
you can use odin.. flash it back to stock.. just use search button.. I did it many times so it safe as long as you pay attention to instructions..
Click to expand...
Click to collapse
How can I get into odin without download mode? This is frustrating grrrrr!
MikePysh said:
How can I get into odin without download mode? This is frustrating grrrrr!
Click to expand...
Click to collapse
Does anyone think a dongle will do the trick to get it into download mode? I really need to get this working again! Thanks
MikePysh said:
Does anyone think a dongle will do the trick to get it into download mode? I really need to get this working again! Thanks
Click to expand...
Click to collapse
Yes a usb jig (dongle) should solve your problem but its not a guarantee. I would recommend buying one anyway, its a good thing to have around just in case things go wrong. They are only a few bucks so its worth it. You can also try using odin, I have heard of people flashing to stock without a download screen, if you see a yellow com box in odin then your good to go.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
Yes a usb jig (dongle) should solve your problem but its not a guarantee. I would recommend buying one anyway, its a good thing to have around just in case things go wrong. They are only a few bucks so its worth it. You can also try using odin, I have heard of people flashing to stock without a download screen, if you see a yellow com box in odin then your good to go.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
Okay thanks. I will get one if I have no sucess.
Anyway, I pulled the battery out for a few hours during hockey and then attempted to try download mode again only I got to a screen that has a bunch of code in red at the top of the screen with the robot underneath saying "Power reset or Upload mode.
What to do?
Thanks
MikePysh said:
How can I get into odin without download mode? This is frustrating grrrrr!
Click to expand...
Click to collapse
try this.. it works for me..
1- Open ODIN on your PC. (DO NOT PRESS/SELECT ANYTHING IN ODIN!)
2- Plug in the USB Cable to PC
(preferably the one that came with your phone *My N1 cable doesn't work??*)
3- Power down Phone if you had not already.
4- Remove the battery.
5- Plug USB into Phone.
6- Hold down BOTH volume buttons and while holding both, insert the battery.
7- Two to three seconds later your phone will be in Download Mode.
Be mindful to not remove connection while ODIN is running.
http://rootzwiki.com/topic/605-guide-root-odin-clean-metamorph-swype-tricks-ninja-apps-everything/page__p__11106#entry11106
MikePysh said:
Okay thanks. I will get one if I have no sucess.
Anyway, I pulled the battery out for a few hours during hockey and then attempted to try download mode again only I got to a screen that has a bunch of code in red at the top of the screen with the robot underneath saying "Power reset or Upload mode.
What to do?
Thanks
Click to expand...
Click to collapse
Yea I have seen that screen before, the dongle is going to be your fix most likely. Just wait for the usb jig if you ordered one, it should put you into download mode no problem. If for some reason the jig doesn't work then let us know.
Sent from my SGH-T959 using Tapatalk 2
I don't know if it will ever work again. I took it to a shop for a free estimate and he said it's pooped. Something frying something because he says all it does is turn on and say vibrant. Really? The sign said fix any phone. I'm waiting for the jig in the mail all the way from Chinese land. Maybe it will help, maybe it won't. I'll keep y'all posted:fingers-crossed:
MikePysh said:
I don't know if it will ever work again. I took it to a shop for a free estimate and he said it's pooped. Something frying something because he says all it does is turn on and say vibrant. Really? The sign said fix any phone. I'm waiting for the jig in the mail all the way from Chinese land. Maybe it will help, maybe it won't. I'll keep y'all posted:fingers-crossed:
Click to expand...
Click to collapse
Did you try the key layout that someone suggested. ThatALWAYS works for me
Sent from my SGH-T959 using xda app-developers app
skinzy98 said:
Did you try the key layout that someone suggested. ThatALWAYS works for me
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Thread layout?
The combination to get into download. Both buttons plus power while plugging in the usb. Or up plus power while plugging in the usb
Sent from my SGH-T959 using xda app-developers app
Jig seems to be a no go. Must be a paperweight now
MikePysh said:
Jig seems to be a no go. Must be a paperweight now
Click to expand...
Click to collapse
If the jigs a no go then I have no idea.
Sent from my GT-I9000 using xda app-developers app
There is Hope
MikePysh said:
Jig seems to be a no go. Must be a paperweight now
Click to expand...
Click to collapse
@MikePysh
I have been in this situation. I feel for you. This the mothergoosing EU bug.
Best bet (and this is how I did it) is to replace the motherboard (I know it sounds scary but it is NOT).
Here are the steps:
1. Buy a used/busted/for parts Vibrant (broken LCD, etc) or even a Galaxy S 4G SGH-T959v from eBay or wherever you can. Do not pay more than US $30-35 if it comes down to that. These two phones, i.e. your T-Mobile Vibrant SGH-T959 and the upgraded 4G version SGH-T959v have the same specs with the exception that the 4G radio is activated on the "v" version.
2. You can either fix it yourself (if you feel brave) or take it to a repair shop and maybe pay US 20-25 for labor to replace the motherboard.
It entirely depends on how badly you want to fix it without throwing it away.
Check out this: http://www.ifixit.com/Device/Samsung_Galaxy_S_Vibrant to get a feel if you can do it yourself.
Hope this helps.
Thanks fham! Sounds like a project I might attempt.
tomy1986.nt said:
unbrick service by jtag here.
http://www.ebay.com/itm/281082401835?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Click to expand...
Click to collapse
Thanks, but that site serves US only.
MikePysh said:
Thanks, but that site serves US only.
Click to expand...
Click to collapse
If your wanting your phone to be fixed by someone I recommend www.mobiletechvideos.com, very trusted source and they fix just about everything for the samsung vibrant t959.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
If your wanting your phone to be fixed by someone I recommend www.mobiletechvideos.com, very trusted source and they fix just about everything for the samsung vibrant t959.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
Do you think it needs the JTAG Brick Repair?
MikePysh said:
Do you think it needs the JTAG Brick Repair?
Click to expand...
Click to collapse
Try to use Baywolf's Vibrant All in one. IT is really good. You could get into the download mode via the tool too.
Good luck.
Here's the thing, i got a refurb yp-g1 and promptly hardbricked it (ex- in car flashing it and it came unplugged, totally my fault for being a idiot.) either way, it now vibrates when you attempt to turn it on, the screen does not turn on and you can hear the speakers running at a very very high pitch if you hold it right next to your ear.
I have a few questions.
How screwed am i?
is this repairable?
Did I damage the boot loader?
Is this fixable via software?
If not will inserting a new main board solve my problems?
Please help
Also if i can fix it with with software i need the image and what ever else would be required.
Depends, if you can still access download mode, please download the package corresponding to your device here.
http://forum.xda-developers.com/showthread.php?t=1531850
If you can't, put it back to download mode, you may need to use either the unbrickable resurrector or a usb jig.
Sent from my Nexus 7 using Tapatalk HD
zaclimon said:
Depends, if you can still access download mode, please download the package corresponding to your device here.
http://forum.xda-developers.com/showthread.php?t=1531850
If you can't, put it back to download mode, you may need to use either the unbrickable resurrector or a usb jig.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
What is the unbrickable resurector, and i tried jig and did not seem to work
i cant see the screen so i dont know for sure
henk5066 said:
What is the unbrickable resurector
Click to expand...
Click to collapse
This:
http://forum.xda-developers.com/showthread.php?t=1369799&nocache=1
zaclimon said:
This:
http://forum.xda-developers.com/showthread.php?t=1369799&nocache=1
Click to expand...
Click to collapse
ok i will try unbrickable resurrector but the problem is i wont know if it works because i can not see the screen
henk5066 said:
ok i will try unbrickable resurrector but the problem is i wont know if it works because i can not see the screen
Click to expand...
Click to collapse
i tried the resurector to no luck
any other suggestions.
Is your device recognized by the computer at least when you try to turn it on?
Sent from my Nexus 7 using Tapatalk HD
zaclimon said:
Is your device recognized by the computer at least when you try to turn it on?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
no it is not recognized at all
henk5066 said:
no it is not recognized at all
Click to expand...
Click to collapse
Oh well I think you would need to spend 40$ on a jtag repair to unbrick it.
Sent from my Nexus 7 using Tapatalk HD
zaclimon said:
Oh well I think you would need to spend 40$ on a jtag repair to unbrick it.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Will my board replacement theory work.
henk5066 said:
Will my board replacement theory work.
Click to expand...
Click to collapse
Surely but where could you find a yp-g1 board?
Sent from my Nexus 7 using Tapatalk HD
zaclimon said:
Surely but where could you find a yp-g1 board?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
i am buying a used one with a broken screen and functioning main board. 0.99$ plus shipping. total of 11$ for a board transplant i can do myself
henk5066 said:
i am buying a used one with a broken screen and functioning main board. 0.99$ plus shipping. total of 11$ for a board transplant i can do myself
Click to expand...
Click to collapse
Alright well if you could feel like it, then do it.
Sent from my Nexus 7 using Tapatalk HD
just wanted to let everyone know that a board replacement worked. problem solved.
henk5066 said:
just wanted to let everyone know that a board replacement worked. problem solved.
Click to expand...
Click to collapse
Wow. Good to hear. Also good to know you are good at replacing the insides if electronics
Sent from my Kindle Fire using Tapatalk 2
one click unbrick...
hey dude so you hard bricked it right? when you plug it into the computer does the computer notice a item we pluged in?
like if you plug it in does your windows computer make the connecting noise?
if it does let me know cause i think i have the tool for you to fix it
in my whole android loving life i have softbricked my galaxy player 3 times and hard bricked it 2
Evoium said:
hey dude so you hard bricked it right? when you plug it into the computer does the computer notice a item we pluged in?
like if you plug it in does your windows computer make the connecting noise?
if it does let me know cause i think i have the tool for you to fix it
in my whole android loving life i have softbricked my galaxy player 3 times and hard bricked it 2
Click to expand...
Click to collapse
No my computer did not make a connecting noise. I had done my research and knew it was hard bricked because nothing was happening and fit the symptoms of a hard brick. it is now perfectly fixed thanks to the new board. I found out my dad has a jtag tool and hopefully over the summer he is going to help me resurrect my other board, i just would need to find a bootloader. But i would love to hear about the tool you have. Also, if anyone has a bootloader can they pm me with a link to it.
Well, I had done the same thing to my gp4.2. What you can try to do is:
Go into download mode and use odin to flash your stock rooted rom.
If you cant access download mode or if odin is not detecting your device...I'm afraid your going to have to get it repaired
First get your phone into download mode
Then download the pit file from this link
http://forum.xda-developers.com/showthread.php?t=1389873
Then put the stock rom in the pda box
Make sure repartition is checked
Finally Flash it and hope for the best!!
i have already fixed the device with a new board, it is the old board i want to refurbish.