I'm considering trying CM7 but I want to ensure that I can change back to the stock ROM on my Atrix 4G (AT&T). I am currently running 2.3.6 / 4.5.141.MB860.ATT.en.us.
I have tried searching the forums and found myself lost in many different threads and still have no clear understanding of a few things here.
I've read about SBF and Fruitcake files. Will either of those return my phone to the stock condition (or at least make it function the same way)? Is there a way to make a backup of my current ROM or download it from Motorola so that I can flash back to it? I saw Fruitcakes have 2.3.6 from "test servers." Are these reliable?
I'm also curious if I can now go back to 2.3.4 with the Fruitcakes. I was under the impression that after an OTA update it was previously impossible to downgrade. Has this now change?
Thank you for your time,
Techphets.
Also, I'm a bit confused what version number would be used to actually identify the ROM, 2.3.6 or 4.5.141? Thanks again.
USA att android 2.3.6 build 141
Flash away. You will be able to go back to stock using sbf. I wish someone would make a YouTube video to how other users it is safe to do so.
Look for the unlock thread here in xda.
MB860, CM7.2.0, Faux 026b1 1Ghz
Related
Hi all
I am a little bit confused?
I got my gf (girlfriend) a motorola atrix from website called PANAMOZ when it arrived I found out it was ME860 (HKTW) not MB860 (ATT 4G)
Some of the stuff was in chinese like keyboard etc etc.
I was going to get her a SGS II same as what I have but she said it was too big for her.
Now the problem I have got is it is running android 2.2.2 and my SGS II is on android 2.3.4
How can I get the motorola atrix ME860 on android 2.3.4?
Do I root it, sbf it via RSD lite, unlock bootloader (if so how),fastboot vol up vol down, etc etc.
I have been reading for 2 days on xda forum and I think I am going to go crazy!
My last moto was the wings! and with my nokia's, HTC, iphones, Blackberry's and Samsung's I have not had any problems updating to latest official or un-official firmware.
So all I would like is some help and support for you guys to get the atrix ME860(HKTW) on gingerbread 2.3.3 or 2.3.4
She is not interested in all types of mods or flashing custom roms every other week!
Just a stable phone that won't let her down and yet be SMART.
Thank you in advance for all your help-advice-tutorials-link
Go to Motorola.com find the atrix and ask them how to update, if your not trying to unlock or root. They should be able to help you.
My overclocked alien atrix
Thank you for your input, I don't mind rooting/unlocking it, its just I don't want to end up bricking it.
I have been reading about using RSD and putting on 1.2.6 then root but when I try that, RSD lite just says fail. When I try the HKTW sbf (4.0.500) it does work but it gives me android 2.2.2 froyo on chinese firmware.
I live in UK and don't mind installing US, UK, EU firmware/sbf its just working out how and in what order I need to do this. I have managed to root it using gingerbreak 1.20apk
your further input is most appreciated thank you.
jtheproducer said:
Thank you for your input, I don't mind rooting/unlocking it, its just I don't want to end up bricking it.
I have been reading about using RSD and putting on 1.2.6 then root but when I try that, RSD lite just says fail. When I try the HKTW sbf (4.0.500) it does work but it gives me android 2.2.2 froyo on chinese firmware.
I live in UK and don't mind installing US, UK, EU firmware/sbf its just working out how and in what order I need to do this. I have managed to root it using gingerbreak 1.20apk
your further input is most appreciated thank you.
Click to expand...
Click to collapse
What happens when you just check for software update in the settings?
If that doesn't work then another option I suggest is to fruitcake up.
1. unlock your bootloader (follow the instructions in the International House of Pudding thread in development).
2. Install RomRacer's Recovery (also in development forum)
3. download the HKTW fruitcake in samcripp's fruitcake thread
4. install fruitcake via recovery you installed in step 2
mysticdrew said:
What happens when you just check for software update in the settings?
If that doesn't work then another option I suggest is to fruitcake up.
1. unlock your bootloader (follow the instructions in the International House of Pudding thread in development).
2. Install RomRacer's Recovery (also in development forum)
3. download the HKTW fruitcake in samcripp's fruitcake thread
4. install fruitcake via recovery you installed in step 2
Click to expand...
Click to collapse
it lets me update to 4.0.560 chinese version, after updating not much changes still android 2.2.2 froyo.
will have a look a fruitcake
Many thanks
It sounds like you/your girlfriend don't really need to unlock (which may or may not be safe with the ME860, since it is a different device).
What I would do is search for 2nd init and get the 2.3.4 HKTW sbf and use the /system from that build. Unfortunately you cannot flash it directly since it is test-keys signed not signer for end user use. You're going to have to do some digging around to find all the stuff you need. Your other option is to unlock and flash the /system and boot.img through fastboot.
Or you can learn Mandarin / Chinese and surf the HKTW forums to see if they can give you an (un)official HKTW sbf/rom.
the2dcour said:
It sounds like you/your girlfriend don't really need to unlock (which may or may not be safe with the ME860, since it is a different device).
What I would do is search for 2nd init and get the 2.3.4 HKTW sbf and use the /system from that build. Unfortunately you cannot flash it directly since it is test-keys signed not signer for end user use. You're going to have to do some digging around to find all the stuff you need. Your other option is to unlock and flash the /system and boot.img through fastboot.
Or you can learn Mandarin / Chinese and surf the HKTW forums to see if they can give you an (un)official HKTW sbf/rom.
Click to expand...
Click to collapse
Muuuuuhhhh........
Stop pulling his leg the2dcour.
As for ur HKTW, go to youtube and watch how to upgrade atrix 4G.
Ha ha ha cant stop laughing.... you joker the2dcour.
Hi there,
I have an Atrix, carrier unlocked phone on the Rogers network running froyo. I would like to upgrade to the latest gingerbread firmware available on the Motorola website. I have a couple questions before I attempt this:
1. Dose it matter which carrier firmware I use, the AT&T or the Bell? If so how do I know which is the correct one to use? Since I bought the carrier unlocked phone off ebay it could be either an AT&T or a Bell.
2. Will the carrier unlock survive the firmware upgrade? Or am I going to have to get my hands on an other unlock code or something?
3. I am thinking about getting a dock so I can use the webtop thing. I have read that there is limits on the webtop based on your data plan. Is there something that needs to be modified to have this work or does the unlocked carrier bypass any of the these restrictions an allow the webtop to work?
Any help on this would be appreciated.
Thanks
74corvette said:
Hi there,
I have an Atrix, carrier unlocked phone on the Rogers network running froyo. I would like to upgrade to the latest gingerbread firmware available on the Motorola website. I have a couple questions before I attempt this:
1. Dose it matter which carrier firmware I use, the AT&T or the Bell? If so how do I know which is the correct one to use? Since I bought the carrier unlocked phone off ebay it could be either an AT&T or a Bell.
2. Will the carrier unlock survive the firmware upgrade? Or am I going to have to get my hands on an other unlock code or something?
3. I am thinking about getting a dock so I can use the webtop thing. I have read that there is limits on the webtop based on your data plan. Is there something that needs to be modified to have this work or does the unlocked carrier bypass any of the these restrictions an allow the webtop to work?
Any help on this would be appreciated.
Thanks
Click to expand...
Click to collapse
1) yes it matters. How did you plan on updating? To check what firmware you are on go to settings about phone
2)yes the unlock should survive it gas to do with the sim.
3)The limits for webtop have to do with AT&T and their limits on tethering
sent from my Atrix via XDA premium
Thanks for your response. As for the update I was planning on following the instructions on the Motorola website. Copy the firmware file to the SD card and then select system upgrade.
yeah i dont think that will be a problem, just check what firmware you have
BUT i would reccomend using a custom ROM
Reasons
-they are based off motorolas firmware and are very stable
-tweaked to give better performance
-are deodexed. meaning you can apply themes to your hearts content and really personalize your phone
Hi marko! thanks for your help on this. What rom would you recommend? I am looking for stability and speed, over themeing and customization.
74corvette said:
Hi marko! thanks for your help on this. What rom would you recommend? I am looking for stability and speed, over themeing and customization.
Click to expand...
Click to collapse
After having tried them all, Nottach's DarkSide is the fastest & most stable. Also ext4. Make sure you do a fastboot wipe before you install it so that you start on a clean system!
Happy flashing!
You don't have an update available via OTA yet?...
Sent from my MB860 using xda premium
So after doing some reading and poking around in the dev forum I think I am going to not bother with the stock Motorola firmware and go straight into a custom rom as you guys have suggested. I have a couple quick questions first, and would appreciate any guidance on the best, safest and easiest way to do this. I have read through the, noob and flashing threads but I can’t seem to find a definitive answer to this.
So since I am running stock froyo, is the install as simple as unlock bootloader, root phone and load on romracers CWM and flash away? Or do I need to worry about gingerbread bootloaders? My understanding is not all roms have bootloaders in them.
OR do I use RSD lite and loaded on the stock 2.3.4, unlocked .sbf file, root phone and load romracers CWM and flash. Which I think this method you can no longer go back to froyo, if need be for whatever reason.
I would prefer to keep the froyo option open, but I am not married to it. Plus I would prefer to do this not using RSD lite as I have had some bad experiences in the past flashing my Samsung cappy with the PC program odin.
Thanks again for your help.
I am running motorola software update and everytime I try I get there is no software update at this time. I want to re-install the offical motorola atrix att update but seem unable to. My att atrix is rooted and is running the stock rom.
is your phone from at&t? as far as I know, there's no recent update since 2.3.4 was released.
Yeah what are you talking about? It sounds like you are on stock already, just rooted.
Sent from my CM7 Atrix 4G
Why do you want to install the latest again if you are currently running it, which it appears you are if there is no update available?
If you want to just reinstall your stock ROM, and you are already on the latest ROM, you cannot do this through update. You will have to flash the latest ROM (which would be your current version) via other means such as RSDLite and a SBF, or via fastboot per the following link:
http://forum.xda-developers.com/showthread.php?t=1163342
Link above is for AT&T device.
It is adviseable to NOT flash a SBF though.
Simple search and some reading will give you all the information you need, but it sounds like you probably have no experience or you wouldn't be asking this, so I would say to be very careful and/or not do anything with your phone if stock is what you want.
Hey guys,
So I am running an ancient rom, GladiAtrix 3 rom with version 2.2.2 of Android. I finally want to flash a new rom, for example Olympus Gold Edition 2.3.6, with Blur so I can retain Webtop. However, it has been so long and all I read on these stickies when I'm trying to relearn are warnings for not hard bricking your Atrix and I am farily confident it doesn't apply to me because I am still not even on 2.3.4 and don't plan on going back to Android 1.8.3. But can someone just confirm for me really quick before I go about flashing if I need to worry about the hard bricking situation?
(All I gotta do is just backup, and follow the installation steps? Or should I factory reset, stock rom flash, THEN flash the new Olympus ROM?)
Thanks in advanced for stoppin by!
Regards,
Any advice appreciated!
Just order a new atrix 4G. I have looked at the possible ROM's to use and I want to try out the Neutrino ROM. I have rooted devices before but I am new to Motorola devices. Please help me find the CURRENT steps I need to take to get to be able to run the Neutrino ROM? I have used the search bar but a lot of the threads that I have found contain links that are no longer valid. Such as http://forum.xda-developers.com/showthread.php?t=1154600 Also I read a this link http://www.xda-developers.com/tag/motorola-atrix-4g/ which has me a worried that I may end up having an issue because all of the guides or seem to have been written before May 15th.
Thanks for taking a look and sorry if that was a little confusing I just didn't want to get flammed for being lazy. In the end I just want to know the most up to date way to get to the Neutrino ROM?? Below I will have included the specs. If I need to post anthing else please let me know
I recieved my phone last night and set it up on Striaght Talk.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model Number: MB860
Android Version: 2.3.4
Your help is GREATLY APPRIECIATED!!
Also on the youTube videos they all seem to say "DO NOT DO TRY TO UNLOCK OR ROOT IF YOU HAVE 2.3.4 OR IT WILL BRICK YOUR PHONE!!"
Is this still the case or has there been a work around for it yet??
you have to unlock bootloader, but you can get FAIL with last step.
If you will get fail - don't worry, you can still unlock it via fastboot (tested on mine INTL Atrix, but every phone is a little bit different)
flash recovery, wipe data, wipe cache, wipe dalvik, flash rom, flash gapps. Done
Thanks ovitz. Can you point me to a thread describing how to unlock the bootloader on this phone?? I can do all the other stuff that you said I need to do after the bootloader is unlocked(clearing and flashing). Just really dont want to mess up my phone. I got 2 actually one for my girlfriend as well. I have java and all SDK/ADB and all programs that I may need. Just want a step by step for comfort.
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
What is the other way (not using fastboot) to unlock this bootloader?? I tried fastboot oem unlock and got this message "INFOOEM unlock is not implemented"
Do I need to use an SBF with RSDlite or something to make this possible? If so please point me in the direction of that thread!?!
Thanks for anyone that can help
ravilov said:
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
Click to expand...
Click to collapse
Sorry ravilov...Did not see your post as I had started a post and then ventured off to seach XDA and some other forums again as well. I have gotten to the link that you posted several times. I just saw that is was posted a long time ago and that there is a lot of things in that post that dont make too much sense to me.
First it says "All phones If you have unlocked then try to use 2.3.4 update zip from Motorola servers, then revert back to a "pre-unlock" version(1.8.3 or earlier on ATT) you will get bricked! Do not use the OTA via experimental servers and revert to older versions WITHOUT pudding preinstalled in your sbf. ATT ONLY Get your 1.8.3 with pudding from the pudding/unlocker section below."
Then shortly after is says "Disclaimer: Tested on 1.8.3 and 2.3.4 using sbf_flash and RSDLITE 5.3.1 or higher, usual warnings being responsible for your own actions yada yada"
So I dont really know if it works or not on the newer atrix's. I dont want to brick a brand new phone and I would just like to see that some one else has done it recently. So yes my eyes are open and search did work for me if you did not see the 2 other threads I mentioned. I just want something up to date, not from early 2011. If it can be confirmed that this works or If you know someone who has unlocked it recently, that would be great to hear from them.
Thanks for posting the link to that thread anyways though. Much apprieciated!
Can anyone tell me if the IHOP method to unlock bootloader will work with my phone?? I cant post in that thread because I do not have enough posts. Here are my specs so I could get some help with which patch to use with RSDlite.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model number: MB860
Android version: 2.3.4
Baseband version: N_01.100.00R
Kernel version: 2.6.32.9
[email protected] #3
APflex version: GAS_ASIA_USAOLYGBSEART_P011
GAS_ASIA_USAOLYGBSEART_A003
GAS_ASIA_USAOLEMSEARET_M001
Build number: 4.5.2A-74_OLE-31
Something else I want to note is that it was bought on ebay as unlocked so I am assuming that is the radio. When I set up the APN for straight talk it did have the choices for AT&T US, AT&T US HSDPA, AT&T US Tether, AT&T US MMS. So this is why I am a little confused/scared as to which piece of pudding to use. It looks easy enough to unlock and clear the caches and flash the ROM I will want to use. Just would like to know which one to use.
Please, please somebody help!!:fingers-crossed:
Thanks you for taking a look to help. Much apprieciated!!!
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
das8nt said:
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
Click to expand...
Click to collapse
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Oregon2 said:
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Click to expand...
Click to collapse
Quite welcome.
APNs are usually set by your SIM, if it's provisioned properly and the phone supports it.
Sent from my MB865 Atrix 2 via Tapatalk 2
Good to know About the APNs. Just to let you know I unlocked, rooted, and flashed the ROM the day you first replied. So I've been running with a new ROM for 3 days and the battery life is great!!
If anyone out there has installed the Neutrino ROM, I have one more question. On the Neurino ROM page it say to do these 2 steps:
"Then, after booting, click on script manager, navigate to /system/etc and run NitroCharger.sh as ROOT and at BOOT!
It is also HIGHLY recommended to download the GPS Mod found in #2. Then you're done."
I tried flashing the GPS mod but I keep gettng an error. Then on my first boot I tried going to /system/etc and from there I do not know where to locate NitroCharger to run it for either. Any help on these two issues would be great!! Also another thanks for everyone for taking a look and helping.
I would post in that thread but I still dont have enought posts.
You really need to reread the original Neutrino thread, since all of this has been answered countless times.
YOU DO NOT FLASH THE GPS MOD DIRECTLY. Open the ZIP and read the instructions.
NitroCharger is only available as an OTA update, but you might reconsider if you really want it since it's been known to cause issues.
Again, I know the thread is very large, but whatever questions or issues you might have, it's very likely answered there already.
Thanks you for just answering, even though you think I should just reread the thread. That answered my questions very fast. I will just not run Nitrocharger, I thought it may casue problems if I could not get it to run, instead you said it is the opposite. As for the GPS mod I just did open up the .zip and read the readme. I pulled out the United_States.zip
Can I just use CWM recovery to flash the US.zip now or do I have to clear all my caches and the likes beforehand?
I know your very busy and I apprieciate the time you take to just look at it.
I have just started my own business and it is going great!! but I have been working 14+ hour days with usually 9 hours hour doing very hard physical labor 6 days a week!! I need to hire more employees soon, lol. I read the whole IHOP thread from front to back and the Neutrino thread but I was very exhasted and stayed up until 330 in the morning doing it!! So again I thank you for taking your time I appriciate it very MUCH that you are helping me to have a fun android experiance and also to learn something new to me!!
Yes, you can just go ahead and flash United_States.zip. No need to clear anything.
Awesome your the MAN!! Thanks again :laugh: :good: