My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
postfatal said:
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
Click to expand...
Click to collapse
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
djjandy said:
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
Click to expand...
Click to collapse
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Brian_SGW_CM9 said:
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
1 tip
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
djjandy said:
My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
Click to expand...
Click to collapse
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
djjandy said:
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
Click to expand...
Click to collapse
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
You can bring it back to life
Flash it with official firmware that's
It !!
Official Samsung firmwares :-
www.samfirmware.com
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
badboys8908 said:
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
Click to expand...
Click to collapse
Exactly I flash a new rom, but the rom is not good then I tried to restore my previous rom which I backed up before. While restoring, it stuck. I took out the battery. I can not enter downloading mode now so it is a big problem.
danishprakash said:
You can bring it back to life
Flash it with official firmware that's
It !!
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
Click to expand...
Click to collapse
Thank you very much, But I can not enter downloading mode now.:crying:
Anindya JV said:
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
Click to expand...
Click to collapse
I have charged the battery to full by external charger. I think I ruin the heart.:crying:
Brian_SGW_CM9 said:
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
What did he do then? Does he fix it ?
djjandy said:
What did he do then? Does he fix it ?
Click to expand...
Click to collapse
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
USB Jig will not get you into download mode either?
Warning:If you flash any ROM built on the leaked Samsung 4.0.4 ROM don't use recovery
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Brian_SGW_CM9 said:
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much.
rapatu2010 said:
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Click to expand...
Click to collapse
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
djjandy said:
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
Click to expand...
Click to collapse
Did you just flash the "Leaked - 4.0.4 I9100XXLQ5..???
If Yes then the only solution is Samsung Service Centre.
Read this:
http://forum.xda-developers.com/showthread.php?t=1756242
This leaked firmware had cause a lots of Hard Brick to other user not only you.
Related
Okay so after much and much reachersh
I got odin to pick up my ace but the screen does not go on......
And then when I say flash it just says setting up conection and stays there
Any help???
You can try with a JIG (Dongle USB) ..if Download Mode on your Ace isn't damaged it would start in Download Mode, then Flash Firmware with Odin
It seems he was using the old version of RZ recovery which had the boot.img bug. He might not have updated to the latest fixed version.
Sent from my GT-S5830 using Tapatalk 2
!_Ale13star_! said:
You can try with a JIG (Dongle USB) ..if Download Mode on your Ace isn't damaged it would start in Download Mode, then Flash Firmware with Odin
Click to expand...
Click to collapse
Thanks but is there not anyother way as I obviosly don't have one and I don't have anhouter working phone
tj_droid said:
It seems he was using the old version of RZ recovery which had the boot.img bug. He might not have updated to the latest fixed version.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Maby....I don't know anyway to fix it??
I think no if recovery and Download Mode don't start..
Last year i bricked my old Galaxy S..recovery doesn't starts, Download Mode doesn't starts..so i bought a JIG ..just putted it in my Galaxy S and in 3-5 seconds it autostarts in Download Mode
When i bought a second hand Galaxy Ace a few weeks ago i find my jig and i tried it on Ace, my phone automatically starts in Download Mode so it is 100% compatible with Galaxy Ace you can be sure buying it
Ok thanks from what I read online it looks like it works
So I am gonna try and make one
THANKS!
Sure..tested by me
and remember CWM recovery backups doesn't work on RZ
Dude i really dont think CWM backups work on RZ!!!
Okay okay I just thought I would try cuz I figered that nothing bad could happen that I could just reflash a new rom if the rom does not boot but...
OBVIOSLY NOT!
ANDROIDCUSTOMIZe said:
Okay okay I just thought I would try cuz I figered that nothing bad could happen that I could just reflash a new rom if the rom does not boot but...
OBVIOSLY NOT!
Click to expand...
Click to collapse
Give it to the samsung guys and tell them it just stopped working when you woke up one fine morning
Yes but...it was rooted
umm..okay..but if it wont turn on how would they know if its rooted or no? when they actually fix the phone and get it working they cant deny you the phone!! they cant be like "you rooted this phone and we worked on it so we wont return it"
HAHA Yes but I'm gonna make the JIG cuz it's fun and might just work
King ACE said:
umm..okay..but if it wont turn on how would they know if its rooted or no? when they actually fix the phone and get it working they cant deny you the phone!! they cant be like "you rooted this phone and we worked on it so we wont return it"
Click to expand...
Click to collapse
I believe they have the ability to open up the internal chip and find files in there
This was sent from a Galaxy Ace. Problem?
EmoBoiix3 said:
I believe they have the ability to open up the internal chip and find files in there
This was sent from a Galaxy Ace. Problem?
Click to expand...
Click to collapse
mostly the second download mode which ace have that is arm dump mode or whatever can directly interact with insides.. if phone can enter that thing then it is recoverable by them..
i saw something similar in Galaxy R thread to recover it from hardbrick.. but no such files are there for SGA
EmoBoiix3 said:
I believe they have the ability to open up the internal chip and find files in there
This was sent from a Galaxy Ace. Problem?
Click to expand...
Click to collapse
exactly.
We should send some spies to Samsung Service Centre. LOL
Sent from my WAREZ impulses.
yeowwwai said:
We should send some spies to Samsung Service Centre. LOL
Sent from my WAREZ impulses.
Click to expand...
Click to collapse
Or bribe the ones already working there..
With a HTC One X..lol
Hey guys thanks for all the reply's I made a JIG but no luck then after watching this video
http://www.youtube.com/watch?v=dpEnEQ4Na1Y
I give up so I am now sending it to service centre hoping they will fix it....
My symptoms are the same
THANKS AGAIN
IF U GOT ANY INFO ON HOW TO FIX PEASE PM ME!!!
look what happened, idk what to do please help me
timtam144 said:
look what happened, idk what to do please help me
Click to expand...
Click to collapse
That's a forced download mode. I've only ever seen this occur to people who attempt to flash I9100 firmwares to I9100G phones. Flash a firmware appropriate to your model, and it should fix it.
timtam144 said:
look what happened, idk what to do please help me
Click to expand...
Click to collapse
its not dead ma8, the phone is in forced dwnld mode.
just remove the batt for a minute then put it back and switch on ur phone and see
if it doesn't resolve then flash a official firmaware pertaining to ur model thro odin and see
Why make another thread ? You already have this thread going with exactly the same issue :-/ Little wonder you borked your phone.
P.S - Your mom was really pissed when I called her earlier & told her what you did to her phone. Prepared to get chewed out next time you see her.
Sun90 said:
its not dead ma8, the phone is in forced dwnld mode.
just remove the batt for a minute then put it back and switch on ur phone and see
if it doesn't resolve then flash a official firmaware pertaining to ur model thro odin and see
Click to expand...
Click to collapse
it didn't helped bro :/ and i cant nt check which firmaware i need to download
timtam144 said:
it didn't helped bro :/ and i cant nt check which firmaware i need to download
Click to expand...
Click to collapse
u can always google the same r use the search bar on xda by putiing"Official Ics firmware for XXXXXXXXXXX" where X= ur country name
Stop being a lazy person and research it yourself. XDA is not a support line for idiots, it's for DEVELOPING.
Sent from my GT-I9100 using Tapatalk 2
Sun90 said:
u can always google the same r use the search bar on xda by putiing"Official Ics firmware for XXXXXXXXXXX" where X= ur country name
Click to expand...
Click to collapse
the phone won't turn on, or go to recovery/dowload mode.... so how can i flash stock firmware?
Buy a USB Jig and try. God, I ended up in this mode and flashed a kernel out of panic and it booted. Are you sure you even know what download mode is?
Sent from my GT-I9100 using Tapatalk 2
themadba said:
Buy a USB Jig and try. God, I ended up in this mode and flashed a kernel out of panic and it booted. Are you sure you even know what download mode is?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
i have no idea what download mode this is....
and what is USB Jig?
Oh look, your problem is here! http://samsungcaptivate.wikia.com/wiki/Putting_the_Phone_into_Download_Mode
Sent from my GT-I9100 using Tapatalk 2
timtam144 said:
i have no idea what download mode this is....
and what is USB Jig?
Click to expand...
Click to collapse
You know what google is though, right?
themadba said:
Oh look, your problem is herehttp://samsungcaptivate.wikia.com/wiki/Putting_the_Phone_into_Download_Mode
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
That's for a Captivate, dude.
So what? Every phone with Android have Download Mode. Enter to it by pressing Vol - + Home + Power.
timtam144 said:
it didn't helped bro :/ and i cant nt check which firmaware i need to download
Click to expand...
Click to collapse
Yes, you can. Your model number is printed on the label under your battery. Once you know your model number, download the appropriate firmware and flash.
All the answers you need are here, dude.
ctomgee said:
You know what google is though, right?
That's for a Captivate, dude.
Click to expand...
Click to collapse
I know that it is but it still tells him what the problem is by showing the same screen as he posted. The OP clearly won't listen to us as we have given him sound advice. I'm finished helping this guy.
Sent from my GT-I9100 using Tapatalk 2
ctomgee said:
That's a forced download mode. I've only ever seen this occur to people who attempt to flash I9100 firmwares to I9100G phones. Flash a firmware appropriate to your model, and it should fix it.
Click to expand...
Click to collapse
It also occurs when you accidentally flash an I9100G firmware onto an I9100M/I9100 device. Happened to me the first time I flashed my phone.
Osutin said:
It also occurs when you accidentally flash an I9100G firmware onto an I9100M/I9100 device. Happened to me the first time I flashed my phone.
Click to expand...
Click to collapse
Yes, I usually imply the reverse when I type this, but forgot this time.
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
alainalemany said:
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
Click to expand...
Click to collapse
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
kilometers4 said:
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
Click to expand...
Click to collapse
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
I've had that problem already. Check the thread link below and get the stock firmware for your device and flash it with Odin.
http://www.google.tt/url?sa=t&sourc...s4GAAw&usg=AFQjCNGy84IPLFxF4qAfKfMxdPjNS5m4-A
Sent from my GT-I9100 using Tapatalk 2
alainalemany said:
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
Click to expand...
Click to collapse
Yea looks good, just looked at it quickly and it seems right.
kilometers4 said:
Yea looks good, just looked at it quickly and it seems right.
Click to expand...
Click to collapse
OK thanks dude... downloading.
cannot flash with odin
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
mark.r22 said:
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
Click to expand...
Click to collapse
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
yes i closed kies via the task manager and checked that all drivers were installed
kilometers4 said:
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
help sgs2 no display
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
yarzaea said:
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
Click to expand...
Click to collapse
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flashing another kernel like siyah might help you.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
If you don't want to flash a stock ROM, root, and flash a custom ROM again, you can use one of odin flashable files for custom kernels, not all have one but you can check (Dorimanx for example)
xDa_nightfury said:
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
yarzaea said:
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
Click to expand...
Click to collapse
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
ramnex said:
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
Click to expand...
Click to collapse
i really wanted to try a jtag but dunno where in the philippines perform such procedure? tho, been thinking of bringing my s2 to samsung and have it estimated since it is no longer covered by warranty...but, this is the philippines, there are no such thing as coming in clean, they will try to bleed you for that precious sg2...tnx alot for your prompt reply and more power!
Hello,
Last night I updated my S3 i9300 (International) while it was already rooted on stock.
After the successful update the phone was working fine for a moment, but after a while it rebooted randomly while being idle. now in the morning the phone was working the same for a while, after the occasional reboot, the phone didn't turn on, however it showed the ( Samsung Galaxy S III i9300 ) screen, loaded the logo for a while and then restarted again.
When i open the clockwork recovery, it works fine but reboots after a while.
I had a backup made from the clockwork recovery before the update and is stored on my PC (not phone).
Is there a way to fix my phone? :/
Thanks in advance...
Just try to reflash to stock using Odin.
WasifSal said:
Hello,
Last night I updated my S3 i9300 (International) while it was already rooted on stock.
After the successful update the phone was working fine for a moment, but after a while it rebooted randomly while being idle. now in the morning the phone was working the same for a while, after the occasional reboot, the phone didn't turn on, however it showed the ( Samsung Galaxy S III i9300 ) screen, loaded the logo for a while and then restarted again.
When i open the clockwork recovery, it works fine but reboots after a while.
I had a backup made from the clockwork recovery before the update and is stored on my PC (not phone).
Is there a way to fix my phone? :/
Thanks in advance...
Click to expand...
Click to collapse
Try a data/factory reset first.
gee2012 said:
Try a data/factory reset first.
Click to expand...
Click to collapse
How can i do that?
It reboots after i turn to Clockwork recovery after a few seconds...
LolzyPop said:
Just try to reflash to stock using Odin.
Click to expand...
Click to collapse
Do i need to download something or just using just odin will do it?
WasifSal said:
Do i need to download something or just using just odin will do it?
Click to expand...
Click to collapse
You do know that you need to download firmware from sammobile.com right?
Sent from my GT-I9300 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1674286
Some basics including stock rom
Use CHECKFUS not sam to download firmware .
jje
Arsaw said:
You do know that you need to download firmware from sammobile.com right?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
No I do not, please explain...
and if you could please explain a little bit about the procedure...
WasifSal said:
No I do not, please explain...
and if you could please explain a little bit about the procedure...
Click to expand...
Click to collapse
okay so my phone was i9300xxlh1 , at sammobile.com there are 17 different firmwares, which one do i download? :/
does the CSC matter?
You have created two threads using a different name. It obvious its you. Your asking for advice but you arnt listening and you are being rude. Liike everyone has said download the xxlh1 stock rom your phone came from sammobile then flash it using odin and that will sort out your problem. Dont worry about csc just get your phone in a working state again.
Sent from my GT-I9300 using xda premium
yldlj said:
You have created two threads using a different name. It obvious its you. Your asking for advice but you arnt listening and you are being rude. Liike everyone has said download the xxlh1 stock rom your phone came from sammobile then flash it using odin and that will sort out your problem. Dont worry about csc just get your phone in a working state again.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Oh, i am really sorry, i wasn't trying to be rude, i really appreciate the help and am listening, and thank you very much for your Advice.
The other account is my brother's, he just joined and made a thread on his own.
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash the rom again with Odin.
Sent from my Nexus 7 using xda premium
Correct s3 ???
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash again - but be 100% certain the ROM you are using is for the precise version of S3 that you have!
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
JJEgan said:
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
Click to expand...
Click to collapse
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
kofiaa said:
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Unfortunately after trying a method that we know nothing about that is often copied from XDA but missing vital facts .
jje
source of the problem found
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
Does not happen if you read and understand first .
jje
nope .. its still not working..
khairulpetrcech said:
nope .. its still not working..
Click to expand...
Click to collapse
Looks like a paid for repair .
But first just try flashing stock firmware via Odin .
jje
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
chris151722 said:
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
Click to expand...
Click to collapse
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
khairulpetrcech said:
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
Click to expand...
Click to collapse
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
your awesome !
chris151722 said:
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
Click to expand...
Click to collapse
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
khairulpetrcech said:
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
Click to expand...
Click to collapse
:good: glad i have help you out..
chris151722 said:
:good: glad i have help you out..
Click to expand...
Click to collapse
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
khairulpetrcech said:
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
Click to expand...
Click to collapse
Yes within the 2years warranty period..
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
khairulpetrcech said:
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yes try the kies method first before sending for repair.
but i dont think it will solve by kies update if you got the brick by flashing wrong cfautoroot.
maybe if you got the brick from flashing rom maybe it can be fix,
---------- Post added at 07:15 PM ---------- Previous post was at 07:08 PM ----------
t3chjunkie said:
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
Click to expand...
Click to collapse
you dont have warranty on your phone? if you have, you dont have to pay for service repair for it in claiming warranty.