So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
alainalemany said:
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
Click to expand...
Click to collapse
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
kilometers4 said:
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
Click to expand...
Click to collapse
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
I've had that problem already. Check the thread link below and get the stock firmware for your device and flash it with Odin.
http://www.google.tt/url?sa=t&sourc...s4GAAw&usg=AFQjCNGy84IPLFxF4qAfKfMxdPjNS5m4-A
Sent from my GT-I9100 using Tapatalk 2
alainalemany said:
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
Click to expand...
Click to collapse
Yea looks good, just looked at it quickly and it seems right.
kilometers4 said:
Yea looks good, just looked at it quickly and it seems right.
Click to expand...
Click to collapse
OK thanks dude... downloading.
cannot flash with odin
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
mark.r22 said:
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
Click to expand...
Click to collapse
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
yes i closed kies via the task manager and checked that all drivers were installed
kilometers4 said:
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
help sgs2 no display
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
yarzaea said:
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
Click to expand...
Click to collapse
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flashing another kernel like siyah might help you.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
If you don't want to flash a stock ROM, root, and flash a custom ROM again, you can use one of odin flashable files for custom kernels, not all have one but you can check (Dorimanx for example)
xDa_nightfury said:
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
yarzaea said:
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
Click to expand...
Click to collapse
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
ramnex said:
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
Click to expand...
Click to collapse
i really wanted to try a jtag but dunno where in the philippines perform such procedure? tho, been thinking of bringing my s2 to samsung and have it estimated since it is no longer covered by warranty...but, this is the philippines, there are no such thing as coming in clean, they will try to bleed you for that precious sg2...tnx alot for your prompt reply and more power!
Related
i have a question for you guys what i have not
do for to get a cell phone brick ?
i have read many threads and the only way for to get it is by using application rom manager thats right or i can get a brick cell phone in odin software.
what if by a mistake set files in a wrong order in odin software
galaxy ace cf gingerreal v1.0 kph
thanks in advance
WHY would you put the wrong files in ODIN, just read the tutorial and follow it correctly?
And to kinda answer the question, what've read is that ODIN will not brick you phone, you might be able to get a bootloop though (just reflash and it should work fine).
Read the newbie guide(sticky thread) about Rom manager, it should be supported now but be cautious, better to use CWM app instead, or just reboot your phone to CWM (dont be lazy).
People brick their phone when unlocking their phone, there should be a proper solution that works without having to brick you phone.
QNBT said:
WHY would you put the wrong files in ODIN, just read the tutorial and follow it correctly?
And to kinda answer the question, what've read is that ODIN will not brick you phone, you might be able to get a bootloop though (just reflash and it should work fine).
Read the newbie guide(sticky thread) about Rom manager, it should be supported now but be cautious, better to use CWM app instead, or just reboot your phone to CWM (dont be lazy).
People brick their phone when unlocking their phone, there should be a proper solution that works without having to brick you phone.
Click to expand...
Click to collapse
thanks a lot i just want to share this information with some people and solve many questions
squallo37 said:
i have a question for you guys what i have not
do for to get a cell phone brick ?
i have read many threads and the only way for to get it is by using application rom manager thats right or i can get a brick cell phone in odin software.
what if by a mistake set files in a wrong order in odin software
galaxy ace cf gingerreal v1.0 kph
thanks in advance
Click to expand...
Click to collapse
Ace break by rom manager
not know about odin if choose wrong files in wrong option as not tried yet but if i'm not wrong if you choose wrong files md5 sum not gonna correct so it shows error and not let you to flash if you choose wrong option
nims11 said:
Ace break by rom manager
Click to expand...
Click to collapse
I don't know about you , it works fine for me
Forever living in my Galaxy Ace using XDA App
Samsung S5830 brick problem
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
nolex90 said:
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
Click to expand...
Click to collapse
I give up because the stickied post on this section was stuck for nothing .
I told you to practice caution , why didn't you listen ?
Forever living in my Galaxy Ace using XDA App
EmoBoiix3 said:
I give up because the stickied post on this section was stuck for nothing .
I told you to practice caution , why didn't you listen ?
Click to expand...
Click to collapse
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
EmoBoiix3 said:
I don't know about you , it works fine for me
Forever living in my Galaxy Ace using XDA App
Click to expand...
Click to collapse
What it works????
I already beicked my phone in two week after buy cause that crap app
i not think it work on your phone well
may be its now supported or something thats why you use
im happy with cwm app
---------- Post added at 10:56 AM ---------- Previous post was at 10:54 AM ----------
nolex90 said:
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
Click to expand...
Click to collapse
Go to samsung service centre
nolex90 said:
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
Click to expand...
Click to collapse
Try a different kohm ?
Forever living in my Galaxy Ace using XDA App
nolex90 said:
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
Click to expand...
Click to collapse
Only way to get it fixed is by changing the mother board..experienced the same a few months ago..
Sent from my GT-S5830 using Tapatalk
I m also using galaxy ace but nothing seems to me like that, it is working properly for me.
My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
postfatal said:
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
Click to expand...
Click to collapse
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
djjandy said:
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
Click to expand...
Click to collapse
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Brian_SGW_CM9 said:
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
1 tip
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
djjandy said:
My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
Click to expand...
Click to collapse
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
djjandy said:
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
Click to expand...
Click to collapse
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
You can bring it back to life
Flash it with official firmware that's
It !!
Official Samsung firmwares :-
www.samfirmware.com
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
badboys8908 said:
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
Click to expand...
Click to collapse
Exactly I flash a new rom, but the rom is not good then I tried to restore my previous rom which I backed up before. While restoring, it stuck. I took out the battery. I can not enter downloading mode now so it is a big problem.
danishprakash said:
You can bring it back to life
Flash it with official firmware that's
It !!
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
Click to expand...
Click to collapse
Thank you very much, But I can not enter downloading mode now.:crying:
Anindya JV said:
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
Click to expand...
Click to collapse
I have charged the battery to full by external charger. I think I ruin the heart.:crying:
Brian_SGW_CM9 said:
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
What did he do then? Does he fix it ?
djjandy said:
What did he do then? Does he fix it ?
Click to expand...
Click to collapse
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
USB Jig will not get you into download mode either?
Warning:If you flash any ROM built on the leaked Samsung 4.0.4 ROM don't use recovery
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Brian_SGW_CM9 said:
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much.
rapatu2010 said:
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Click to expand...
Click to collapse
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
djjandy said:
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
Click to expand...
Click to collapse
Did you just flash the "Leaked - 4.0.4 I9100XXLQ5..???
If Yes then the only solution is Samsung Service Centre.
Read this:
http://forum.xda-developers.com/showthread.php?t=1756242
This leaked firmware had cause a lots of Hard Brick to other user not only you.
i installed a custom rom to the Galaxy S2 everything was working fine booted up and everything.. But then i try to put a Original Kernel File back to the phone to get rid of the Yellow explanation mark in the boot screen then i went into Recovery and cleared the usual Davik cache, cleared file permissions ect. But then when i rebooted it i got a black screen it was'nt coming back on, so i took out the battery ect and still nothing on screen!! i cant even get into recovery mode or anything its completely dead.. i've even left out the battery put batt back in but still nothing.. i stheir a way i can revive this phone?? Cheers.. PLEASE HELP... :crying:
Did you try to reset the phone to factory setting?
Sent from my GT-I9100 using xda premium
gs2rom said:
Did you try to reset the phone to factory setting?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I'm unable to do anything with it now! no power NOTHING. My batt was nearly full when it went off so i know its not the batt and even when i put cable in with batt in it still does'nt show anything on screen..
aviz06 said:
i installed a custom rom to the Galaxy S2 everything was working fine booted up and everything.. But then i try to put a Original Kernel File back to the phone to get rid of the Yellow explanation mark in the boot screen then i went into Recovery and cleared the usual Davik cache, cleared file permissions ect. But then when i rebooted it i got a black screen it was'nt coming back on, so i took out the battery ect and still nothing on screen!! i cant even get into recovery mode or anything its completely dead.. i've even left out the battery put batt back in but still nothing.. i stheir a way i can revive this phone?? Cheers.. PLEASE HELP... :crying:
Click to expand...
Click to collapse
What's your ROM details?
Swyped from my Samsung Galaxy SII
Jokesy said:
What's your ROM details?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
I Updated to this rom >>GT-I9100 Resurrection Remix JB v3.0.4[16/08][AOKP JB PRE](AROMA+OTA) <<
Could you doing wipe?
Sorry for my english
Envoyer depuis mon S2 avec tapatalk
---------- Post added at 09:13 PM ---------- Previous post was at 09:08 PM ----------
Could you doing wipe?
After installing and before reboot i think you must do 3 wipes for this ROM.
Sorry for my english
Envoyer depuis mon S2 avec tapatalk
aviz06 said:
I Updated to this rom >>GT-I9100 Resurrection Remix JB v3.0.4[16/08][AOKP JB PRE](AROMA+OTA) <<
Click to expand...
Click to collapse
from which ROM?
With what kernel?
Swyped from my Samsung Galaxy SII
try download mode..
or pressing volume down and connecting it to pc at the same time.. (you´ll end up in download mode or your phone is pretty dead)
Jokesy said:
from which ROM?
With what kernel?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
from a stock rom with Kernel_I9100XWLPT insecure then i wrote the custom rom and then put the original kernel back on to get rid of the yellow exclamation mark rebooted then nothing!
aviz06 said:
from a stock rom with Kernel_I9100XWLPT insecure then i wrote the custom rom and then put the original kernel back on to get rid of the yellow exclamation mark rebooted then nothing!
Click to expand...
Click to collapse
That was the problem.
Your kernel has brick bug, it's being said 1 million times but you did not read it or ask questions before messing around with your device.
I'm afraid your device may be hard bricked.
I'm sorry.
Let's see what can be done.
If you can get to download mode with combined buttons or usb jig then visit this thread: forum.xda-developers.com/showthread.php?t=1841099
Swyped from my Samsung Galaxy SII
Jokesy said:
That was the problem.
Your kernel has brick bug, it's being said 1 million times but you did not read it or ask questions before messing around with toot device.
I'm afraid your device may be hard bricked.
I'm sorry.
Let's see what can be done.
If you can get to download mode with combined buttons or usb jig then visit this thread: forum.xda-developers.com/showthread.php?t=1841099
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
ok m8 thanks for the info, but because the phone is only 4mths old i have requested a service repair with samsung so im gonna send it off tomoz to get sorted.. is their a way samsung can find out if i been messing with it or will they just flash with stock firmware anyways once they can get it to boot? or will they just replace the board? Thanks. Mick.
aviz06 said:
ok m8 thanks for the info, but because the phone is only 4mths old i have requested a service repair with samsung so im gonna send it off tomoz to get sorted.. is their a way samsung can find out if i been messing with it or will they just flash with stock firmware anyways once they can get it to boot? or will they just replace the board? Thanks. Mick.
Click to expand...
Click to collapse
If it's hard bricked there is nothing us users can do to get the phone back but I'd imagine it wouldn't be too hard for Samsung to realize what you've done
Good luck :good:
UrbanDesigns said:
If it's hard bricked there is nothing us users can do to get the phone back but I'd imagine it wouldn't be too hard for Samsung to realize what you've done
Good luck :good:
Click to expand...
Click to collapse
Hopefully they should repair.. Thats the only option i have left.. Stupid me i only just bought it as well!
i'll keep u updated and let u know if it was repaired? i here a few peeps get similar probs when trying to update to custom firmware's and samsung do repair and send them back to their customers..:fingers-crossed:
I hope you will have your phone working again dude, and I want to ask a question to Jokesy, is there a brickbug or something bad about XWLP7 ? Because if I turn back to stock rooted SGS2 , i will use XWLP7.
teror300 said:
I hope you will have your phone working again dude, and I want to ask a question to Jokesy, is there a brickbug or something bad about XWLP7 ? Because if I turn back to stock rooted SGS2 , i will use XWLP7.
Click to expand...
Click to collapse
No, there is no brick bug on XWLP7
Jokesy said:
No, there is no brick bug on XWLP7
Click to expand...
Click to collapse
Oh ok, Thanks for answer.
teror300 said:
Oh ok, Thanks for answer.
Click to expand...
Click to collapse
You are welcome
just an update on my BRICKED phone, i got it back today from samsung repair center all working as normal now and back to life! Thankyou Samsung!! :highfive:
Now were/what is the best way to root my S2 without doing this again? or is it best just to leave it as is?..
aviz06 said:
just an update on my BRICKED phone, i got it back today from samsung repair center all working as normal now and back to life! Thankyou Samsung!! :highfive:
Now were/what is the best way to root my S2 without doing this again? or is it best just to leave it as is?..
Click to expand...
Click to collapse
And people say Samsung has a bad customer service, Samsung FTW
The easiest way to Root your phone is probably the Chainfire Root, which you can find here:
http://forum.xda-developers.com/showthread.php?t=1103399
It`s very important that you read the instructions there on how to Root your phone.
It´s a great method because it gives you Root and Clockworkmod in one package and you will keep your stock Kernel.
After that you can install any Rom or Kernel you want but it`s highly recomended to not install any Kernel with the Hard Brick Bug. Read this thread for more information:
http://forum.xda-developers.com/showthread.php?t=1756242
If you really want to remove the triangle there is a mod from chainfire, called TriangleAway: http://forum.xda-developers.com/showthread.php?t=1494114
but I would recommend not to do it, since people also managed to screw that up (bricking their phone), I mean is it really so disturbing to see the Triangle for 2 seconds everytime you reboot?
Good Luck
Hello,
Last night I updated my S3 i9300 (International) while it was already rooted on stock.
After the successful update the phone was working fine for a moment, but after a while it rebooted randomly while being idle. now in the morning the phone was working the same for a while, after the occasional reboot, the phone didn't turn on, however it showed the ( Samsung Galaxy S III i9300 ) screen, loaded the logo for a while and then restarted again.
When i open the clockwork recovery, it works fine but reboots after a while.
I had a backup made from the clockwork recovery before the update and is stored on my PC (not phone).
Is there a way to fix my phone? :/
Thanks in advance...
Just try to reflash to stock using Odin.
WasifSal said:
Hello,
Last night I updated my S3 i9300 (International) while it was already rooted on stock.
After the successful update the phone was working fine for a moment, but after a while it rebooted randomly while being idle. now in the morning the phone was working the same for a while, after the occasional reboot, the phone didn't turn on, however it showed the ( Samsung Galaxy S III i9300 ) screen, loaded the logo for a while and then restarted again.
When i open the clockwork recovery, it works fine but reboots after a while.
I had a backup made from the clockwork recovery before the update and is stored on my PC (not phone).
Is there a way to fix my phone? :/
Thanks in advance...
Click to expand...
Click to collapse
Try a data/factory reset first.
gee2012 said:
Try a data/factory reset first.
Click to expand...
Click to collapse
How can i do that?
It reboots after i turn to Clockwork recovery after a few seconds...
LolzyPop said:
Just try to reflash to stock using Odin.
Click to expand...
Click to collapse
Do i need to download something or just using just odin will do it?
WasifSal said:
Do i need to download something or just using just odin will do it?
Click to expand...
Click to collapse
You do know that you need to download firmware from sammobile.com right?
Sent from my GT-I9300 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1674286
Some basics including stock rom
Use CHECKFUS not sam to download firmware .
jje
Arsaw said:
You do know that you need to download firmware from sammobile.com right?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
No I do not, please explain...
and if you could please explain a little bit about the procedure...
WasifSal said:
No I do not, please explain...
and if you could please explain a little bit about the procedure...
Click to expand...
Click to collapse
okay so my phone was i9300xxlh1 , at sammobile.com there are 17 different firmwares, which one do i download? :/
does the CSC matter?
You have created two threads using a different name. It obvious its you. Your asking for advice but you arnt listening and you are being rude. Liike everyone has said download the xxlh1 stock rom your phone came from sammobile then flash it using odin and that will sort out your problem. Dont worry about csc just get your phone in a working state again.
Sent from my GT-I9300 using xda premium
yldlj said:
You have created two threads using a different name. It obvious its you. Your asking for advice but you arnt listening and you are being rude. Liike everyone has said download the xxlh1 stock rom your phone came from sammobile then flash it using odin and that will sort out your problem. Dont worry about csc just get your phone in a working state again.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Oh, i am really sorry, i wasn't trying to be rude, i really appreciate the help and am listening, and thank you very much for your Advice.
The other account is my brother's, he just joined and made a thread on his own.
my phone does not start up anymore after I installed one ROMs, how can I reset the phone? computer without the phone does not have any ROM
PLEASE HELP ME ANYBODY :crying:
phone
phone model is GT-I9100
hiqpocrates said:
my phone does not start up anymore after I installed one ROMs, how can I reset the phone? computer without the phone does not have any ROM
PLEASE HELP ME ANYBODY :crying:
Click to expand...
Click to collapse
Need a little more info. What rom were you on..and which one you tried to install?? What kind of phone, i'm thinking a Galaxy s2 but which version? What recovery are you using? How did you try to install ( what steps you did to install)?
---------- Post added at 08:25 PM ---------- Previous post was at 08:20 PM ----------
hiqpocrates said:
phone model is GT-I9100
Click to expand...
Click to collapse
Are you getting splash screen..boot animation?? Any lights? Can you get into download mode or recovery mode? You need to be a little more specific so someone can help you.
Service centre.
idc what rom i installed it 2 months ago and dont remember
Are you getting splash screen..boot animation?? Any lights? Can you get into download mode or recovery mode? You need to be a little more specific so someone can help you.
Click to expand...
Click to collapse
NOTHING? only if I give my phone on charge I can see the download icon
hiqpocrates said:
idc what rom i installed it 2 months ago and dont remember
Click to expand...
Click to collapse
First...take a sledge hammer and smash it! Second..get a new phone and leave it stock! If you would have read the stickies and understood them for your device..this might not have happened!
Pull battery out leave it for a bit. Did you flash and then it died? What did you do to it before it died?? What have you tried??
andrewwright said:
Pull battery out leave it for a bit. Did you flash and then it died? What did you do to it before it died?? What have you tried??
Click to expand...
Click to collapse
i tried install new rom? succesful installed and when reboot it died?
i only want know can i install new rom without phone start up
Probably not. Did you flash wrong zip for model.? Can at least try a jig before you sell it for parts.
Hey what state is the battery in.Remote possibility its something battery related.
And try to post more info and post in better english as its hard to decipher exactly what you are saying.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
andrewwright said:
Probably not. Did you flash wrong zip for model.? Can at least try a jig before you sell it for parts.
Click to expand...
Click to collapse
how jig
Make it / buy it.
Sent from my GT-I9100 using xda app-developers app