[Q] Flashing gone wrong? - Sony Xperia P, U, Sola, Go

Hi all!
I think this is the right place to post this (please correct me if i'm wrong)..
Today I received my xperia s and was super happy!! Made a call to my service provider to activate my sim. All good. I then connected the phone to my computer and installed PC Companion as there was a notification to update. PC Companion confirmed this and I went ahead with the download. After download was complete the program began installing the software and about 1/4 of the way in it stopped for about 15min and then gave me an error saying it was not able to finish installation I should try again or contact support. I then installed SEUS and the same thing happened. I then did some more research and downloaded both the GB and ICS generic .ftf files, installed flash tool 0.8.6 and tried to flash. For the ICS update I got the same spot as SEUS and PC Companion did before it froze.
10/042/2012 19:42:09 - INFO - <- This level is successfully initialized
10/042/2012 19:42:09 - INFO - Flashtool Version 0.8.6.0 built on 2012-06-13 08:08:54
10/042/2012 19:42:09 - INFO - You can drag and drop ftf files here to start flashing them
10/042/2012 19:42:14 - INFO - Device disconnected
10/042/2012 19:42:19 - INFO - Selected LT26_6.1.A.0.452_Generic_CH_1257-3740_ (1).ftf
10/042/2012 19:42:19 - INFO - Preparing files for flashing
10/043/2012 19:43:03 - INFO - Please connect your device into flashmode.
10/043/2012 19:43:20 - INFO - Device connected in flash mode
10/043/2012 19:43:20 - INFO - Opening device for R/W
10/043/2012 19:43:20 - INFO - Device connected in flash mode
10/043/2012 19:43:20 - INFO - Reading device information
10/043/2012 19:43:20 - INFO - Phone ready for flashmode operations.
10/043/2012 19:43:20 - INFO - Start Flashing
10/043/2012 19:43:20 - INFO - Flashing loader
10/043/2012 19:43:22 - INFO - Loader : S1_Root_de72 - Version : R5C004 / Bootloader status : ROOTABLE
10/043/2012 19:43:22 - INFO - Flashing partition-image.sin
10/043/2012 19:43:26 - INFO - Flashing kernel.sin
10/043/2012 19:43:30 - INFO - Flashing fotakernel.sin
10/043/2012 19:43:34 - INFO - Flashing amss_fs_2.sin
10/043/2012 19:43:37 - INFO - Flashing amss_fs_1.sin
10/043/2012 19:43:39 - INFO - Flashing amss_fsg.sin
10/043/2012 19:43:40 - INFO - Flashing apps_log.sin
10/043/2012 19:43:43 - INFO - Flashing system.sin
Stuck here. at 24%.
I should say the first time this happened my phone was essentially bricked in that only the boot screen showed.
After trying to flash back to GB the process completed however the phone would turn on to the boot screen for about 10 seconds then restart, repeat.
I don't know if I was meant to change a setting in the phone to allow this process to happen or not but I don't have access to the phone so can't do much about that now....does anyone have any idea as to how to proceed?
My SI Number is 1257-6322 if that helps. I used firmwares:
LT26_6.1.A.0.452_Generic_CH_1257-3740_ (1) for ICS &
LT26i_6.0.A.3.75_Generic NL for GB.

red.leader87 said:
Hi all!
I think this is the right place to post this (please correct me if i'm wrong)..
Today I received my xperia s and was super happy!! Made a call to my service provider to activate my sim. All good. I then connected the phone to my computer and installed PC Companion as there was a notification to update. PC Companion confirmed this and I went ahead with the download. After download was complete the program began installing the software and about 1/4 of the way in it stopped for about 15min and then gave me an error saying it was not able to finish installation I should try again or contact support. I then installed SEUS and the same thing happened. I then did some more research and downloaded both the GB and ICS generic .ftf files, installed flash tool 0.8.6 and tried to flash. For the ICS update I got the same spot as SEUS and PC Companion did before it froze.
10/042/2012 19:42:09 - INFO - <- This level is successfully initialized
10/042/2012 19:42:09 - INFO - Flashtool Version 0.8.6.0 built on 2012-06-13 08:08:54
10/042/2012 19:42:09 - INFO - You can drag and drop ftf files here to start flashing them
10/042/2012 19:42:14 - INFO - Device disconnected
10/042/2012 19:42:19 - INFO - Selected LT26_6.1.A.0.452_Generic_CH_1257-3740_ (1).ftf
10/042/2012 19:42:19 - INFO - Preparing files for flashing
10/043/2012 19:43:03 - INFO - Please connect your device into flashmode.
10/043/2012 19:43:20 - INFO - Device connected in flash mode
10/043/2012 19:43:20 - INFO - Opening device for R/W
10/043/2012 19:43:20 - INFO - Device connected in flash mode
10/043/2012 19:43:20 - INFO - Reading device information
10/043/2012 19:43:20 - INFO - Phone ready for flashmode operations.
10/043/2012 19:43:20 - INFO - Start Flashing
10/043/2012 19:43:20 - INFO - Flashing loader
10/043/2012 19:43:22 - INFO - Loader : S1_Root_de72 - Version : R5C004 / Bootloader status : ROOTABLE
10/043/2012 19:43:22 - INFO - Flashing partition-image.sin
10/043/2012 19:43:26 - INFO - Flashing kernel.sin
10/043/2012 19:43:30 - INFO - Flashing fotakernel.sin
10/043/2012 19:43:34 - INFO - Flashing amss_fs_2.sin
10/043/2012 19:43:37 - INFO - Flashing amss_fs_1.sin
10/043/2012 19:43:39 - INFO - Flashing amss_fsg.sin
10/043/2012 19:43:40 - INFO - Flashing apps_log.sin
10/043/2012 19:43:43 - INFO - Flashing system.sin
Stuck here. at 24%.
I should say the first time this happened my phone was essentially bricked in that only the boot screen showed.
After trying to flash back to GB the process completed however the phone would turn on to the boot screen for about 10 seconds then restart, repeat.
I don't know if I was meant to change a setting in the phone to allow this process to happen or not but I don't have access to the phone so can't do much about that now....does anyone have any idea as to how to proceed?
My SI Number is 1257-6322 if that helps. I used firmwares:
LT26_6.1.A.0.452_Generic_CH_1257-3740_ (1) for ICS &
LT26i_6.0.A.3.75_Generic NL for GB.
Click to expand...
Click to collapse
Unplug your phone and try to press the power button and the volup button at the same time for a long period (until you get 3 short vibrations)
it will completely shutdown your phone
first you can try to plug it to a power supply and check if it charges or not. For flashing I advise you the phone to be charged at least 80%
once done, unplug the phone and press voldown button while plugging to computer. It should go to flashmode and you would be able to retry flashing.
Try on another computer if possible. Maybe your usb port is not enough self powered ... try with another cable if you can. I had once an issue with my cable where my phone didn't stop to show as plugged / unplugged / plugged / unplugged
Let us know

Androxyde said:
Unplug your phone and try to press the power button and the volup button at the same time for a long period (until you get 3 short vibrations)
it will completely shutdown your phone
first you can try to plug it to a power supply and check if it charges or not. For flashing I advise you the phone to be charged at least 80%
once done, unplug the phone and press voldown button while plugging to computer. It should go to flashmode and you would be able to retry flashing.
Try on another computer if possible. Maybe your usb port is not enough self powered ... try with another cable if you can. I had once an issue with my cable where my phone didn't stop to show as plugged / unplugged / plugged / unplugged
Let us know
Click to expand...
Click to collapse
Thanks for your suggestions and response, Androxyde.
I hard reset my phone every time (one vibration followed by three vibrations). If I don't (since the error first arose) then the phone will be constantly restarting on the "Sony" loadscreen...though sometimes it has got to the Xperia loadscreen after which it will freeze and restarts again.
I made sure I had over 90% battery power when I first flashed. USB ports have plenty of power. Now as the phone doesn't turn on I have been charging via power adapter to get a graphical indication of power level (not over 9000!!).
I'm beginning to think I have bricked the phone and am considering calling up my provider and telling them so. It looks like an isolated case, though I did read a post by someone who had the same issue but there was no solution as such. There is also a Sony service centre in my city (melbourne). I will try a couple more firmwares both GB and ICS and see how it goes...any other suggestions are welcome!!

Phone bricked after unlock and install of doomkernel
I have a similar (the same?) issue:
Unlocked the Xperia S
Used fastboot to flash doomkernel
Turned the phone on
Nothing happened. I've tried flashing several different stock ftfs using flashtool 0.8.6 and every single time I get the message:
ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0019";ERR_DYNAMIC="SIN header verification failed";​
I've tried flashing only kernel.sin using fastboot and everything looks OK:
sending 'boot' (5576 KB)...
(bootloader) USB download speed was 18601kB/s
OKAY [ 0.321s]
writing 'boot'...
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x0000d000-0x00014fff
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 0.347s]
finished. total time: 0.669s​
But again, the screen remains black and nothing happens. The phone had a full battery when I started and if I "turn it on" and plug the charger the red light turns on.
Any ideas as to how to bring it back to life?

g2010a said:
I have a similar (the same?) issue:
Unlocked the Xperia S
Used fastboot to flash doomkernel
Turned the phone on
Nothing happened. I've tried flashing several different stock ftfs using flashtool 0.8.6 and every single time I get the message:
ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0019";ERR_DYNAMIC="SIN header verification failed";​
I've tried flashing only kernel.sin using fastboot and everything looks OK:
sending 'boot' (5576 KB)...
(bootloader) USB download speed was 18601kB/s
OKAY [ 0.321s]
writing 'boot'...
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x0000d000-0x00014fff
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 0.347s]
finished. total time: 0.669s​
But again, the screen remains black and nothing happens. The phone had a full battery when I started and if I "turn it on" and plug the charger the red light turns on.
Any ideas as to how to bring it back to life?
Click to expand...
Click to collapse
If you still able to use fastboot than try to flash a prerooted image file( gb or ics I don't know what firmware you was on) and the kernel.elf
Sent from my LT26i using Tapatalk 2

gm007 said:
If you still able to use fastboot than try to flash a prerooted image file( gb or ics I don't know what firmware you was on) and the kernel.elf
Click to expand...
Click to collapse
I tried flashing Swedish rooted img (6.0.A.3.75) -- I originally had the German version. It flashed just fine using flashtool but it still won't turn on
I then flashed S-Advanced-Stock-v01_kernel.elf to no avail. I have a sinking feeling.

In the end I returned the phone under my carrier's DOA/ELF policy. I found out 24hrs after I sent the phone back (interstate) that it was irreparable!..and received my new one yesterday. Successfully flashed to .42 today and am super happy with the device!!
As to the original issue I suspect the cause could be;
- Hardware failure. If so almost 100% sure it's not my computer. Phone memory corrupt or battery issue would be my first guess.
- Downloaded software (update) corrupted, initial installation of GB corrupted.

So at least you know you didn't brick it... Btw, it happened to me too when I wanted to upgrade to ICS. It did a really short bootloop and got stuck. Eventually I got it to work and flash. I somehow made it go to green led bootloop. It would turn on and go to flash mode and turn off again. I had to find the right miment to throw the ftf file on it.
Sent from my LT26i using xda app-developers app

Related

[SOLVED] E10i bricked after flashing E10_nAa-11_2.6.29.6-nAa-11.ftf

Hi,
My X10 mini (E10i) was rooted some months ago.
I decide to install miniCM7.2, so I succesfully unlock the bootloader, then kernel flashing appears to be ok, but when I reboot it, it show a new big logo, and after a while, a kind of animated background was visible. But it loop indefinitely on this animation, freeze, screen become blank, then reloop ...
I can't reboot it, I can't remove the batterie (it's hidden into the device)
Help !
Here the logs:
11/018/2012 20:18:58 - INFO - <- This level is successfully initialized
11/018/2012 20:18:58 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
11/018/2012 20:18:58 - INFO - You can drag and drop ftf files here to start flashing them
11/019/2012 20:19:03 - INFO - Device disconnected
11/019/2012 20:19:24 - INFO - Selected E10_nAa-11_2.6.29.6-nAa-11.ftf
11/019/2012 20:19:24 - INFO - Preparing files for flashing
11/019/2012 20:19:24 - INFO - Please connect your device into flashmode.
11/020/2012 20:20:12 - INFO - Device connected in flash mode
11/020/2012 20:20:12 - INFO - Opening device for R/W
11/020/2012 20:20:13 - INFO - Reading device information
11/020/2012 20:20:13 - INFO - Phone reading for flashing.
11/020/2012 20:20:13 - INFO - Start Flashing
11/020/2012 20:20:13 - INFO - Flashing loader
11/020/2012 20:20:14 - INFO - Loader version : r4A060 / Bootloader status : ROOTED
11/020/2012 20:20:14 - INFO - Flashing kernel.sin
11/020/2012 20:20:16 - INFO - Flashing finished.
11/020/2012 20:20:16 - INFO - Please wait. Phone will reboot
11/020/2012 20:20:16 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
11/020/2012 20:20:16 - INFO - Device connected in flash mode
11/020/2012 20:20:18 - INFO - Device disconnected
11/020/2012 20:20:20 - INFO - Device connected in flash mode
11/020/2012 20:20:34 - INFO - Device disconnected
11/020/2012 20:20:42 - INFO - Device connected with USB debugging off
11/020/2012 20:20:42 - INFO - For 2011 devices line, be sure you are not in MTP mode
after that I receive no more message, and after several minutes I disconnect and reboot my phone.
when the big naa logo appears try hitting the back button to enter recovery mode. then flash your rom and gapps, wipe/fact reset then reboot. that i hope should fix the loop
demoniacs said:
when the big naa logo appears try hitting the back button to enter recovery mode. then flash your rom and gapps, wipe/fact reset then reboot. that i hope should fix the loop
Click to expand...
Click to collapse
I will, but for the moment it loop but it probably not reboot in loop, since I seen the logo once. And now it's only the screen animation that run 2 seconds, stop, black screen, and loop on screen animation with different colors
rafal98 said:
I will, but for the moment it loop but it probably not reboot in loop, since I seen the logo once. And now it's only the screen animation that run 2 seconds, stop, black screen, and loop on screen animation with different colors
Click to expand...
Click to collapse
Re-flash to stock.
Make sure you garbed the correct downloads.. re-read instructions.
unlocked bootloader? While in bootloop zone,press and hold power button + middle button.phone should reboot, and u can go to recovery and install ROM
Again, how to reflash in the current situation ?
The good news is that flashtool detect the phone, but I can't reflash because I can't shutdown the phone ...
Do first things what i say, if that not work, u should reflash to stock rom with SEUS, with repair mode.
I miss your first post. In fact I wait all the night that battery become empty, and run flashtool, push foward and plug. I probably wait 5' that the phone has enought energy, then flashtool detect the phone and flash it with the stock kernel.
And it's works !!!!
note: the colored screen animation that was looping, was in fact the Sony Ericson logo presentation during the boot
Recover X10i
XTacDK said:
unlocked bootloader? While in bootloop zone,press and hold power button + middle button.phone should reboot, and u can go to recovery and install ROM
Click to expand...
Click to collapse
Thanks. This has worked to reinstall a ROM on my SE Xperia X10 Mini
Hey there,
I have a similar problem here, but I can't solve It.
Did a Hard Reset by pressing the Power key and Home Key. I also tried to click the Reset button under the phone cover near the IMEI codetag thing.
I have tried to use the X10FlashTool, SEUS (it only says that i have the newest software already)
When I try to start the phone all i can see is a black screen and nothing else.
Any more solutions i can try?
rafal98 said:
Hi,
My X10 mini (E10i) was rooted some months ago.
I decide to install miniCM7.2, so I succesfully unlock the bootloader, then kernel flashing appears to be ok, but when I reboot it, it show a new big logo, and after a while, a kind of animated background was visible. But it loop indefinitely on this animation, freeze, screen become blank, then reloop ...
I can't reboot it, I can't remove the batterie (it's hidden into the device)
Help !
Here the logs:
11/018/2012 20:18:58 - INFO - <- This level is successfully initialized
11/018/2012 20:18:58 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
11/018/2012 20:18:58 - INFO - You can drag and drop ftf files here to start flashing them
11/019/2012 20:19:03 - INFO - Device disconnected
11/019/2012 20:19:24 - INFO - Selected E10_nAa-11_2.6.29.6-nAa-11.ftf
11/019/2012 20:19:24 - INFO - Preparing files for flashing
11/019/2012 20:19:24 - INFO - Please connect your device into flashmode.
11/020/2012 20:20:12 - INFO - Device connected in flash mode
11/020/2012 20:20:12 - INFO - Opening device for R/W
11/020/2012 20:20:13 - INFO - Reading device information
11/020/2012 20:20:13 - INFO - Phone reading for flashing.
11/020/2012 20:20:13 - INFO - Start Flashing
11/020/2012 20:20:13 - INFO - Flashing loader
11/020/2012 20:20:14 - INFO - Loader version : r4A060 / Bootloader status : ROOTED
11/020/2012 20:20:14 - INFO - Flashing kernel.sin
11/020/2012 20:20:16 - INFO - Flashing finished.
11/020/2012 20:20:16 - INFO - Please wait. Phone will reboot
11/020/2012 20:20:16 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
11/020/2012 20:20:16 - INFO - Device connected in flash mode
11/020/2012 20:20:18 - INFO - Device disconnected
11/020/2012 20:20:20 - INFO - Device connected in flash mode
11/020/2012 20:20:34 - INFO - Device disconnected
11/020/2012 20:20:42 - INFO - Device connected with USB debugging off
11/020/2012 20:20:42 - INFO - For 2011 devices line, be sure you are not in MTP mode
after that I receive no more message, and after several minutes I disconnect and reboot my phone.
Click to expand...
Click to collapse
i have same problem after try to flash naa kernel
same message, not my device but my gf device (x10 mini pro)
and flash over sony companion over internet
take a time but it works
the device back to stock rom, i try to flash to custom rom, but every custom rom need naa kernel
and i tried twice to flash it and failed like your message
anyone can solve my problem?
now using cyanocream sandwich (cant connect to 3g and no radio)
After flashing with nAa v11 .....My x10 mini got hard bricked.......Just a RED led appears with blank screen.....Any help guys????
Pradee265254 said:
After flashing with nAa v11 .....My x10 mini got hard bricked.......Just a RED led appears with blank screen.....Any help guys????
Click to expand...
Click to collapse
flash it with SEUS over internet
it will make your device back to stock rom
No phone connected to the computer
Try whith SE PC Suite
- Support Zone
- Start the update of the phones software
- There will be a pop up stating the phone was not found, on this pop up there is a link to "repair the phone" click it and then connect your phone in flash mode.
See screenshot.
Do a factory reset
Sent from my E10i using XDA

[Q] ST15i probably bricked (Stock ROM cannot be flashed anymore)

Dear All,
I beg your help for solving the following problem (already browsed for similar topics, no luck).
Here a brief history of the mess I have been doing:
I had installed Cyanogenmod (Worked)
I had flashed back a Stock ROM (ST15i_4.0.A.2.368__GENERIC_(1244-2098).ftf) (Worked)
Even though I knew that was not a good idea, I updated the software (as requested by android) (Bricked)
I have tried to re-flash using the same Stock ROM has worked before, with the result you can read below.
11/031/2012 19:31:43 - INFO - Device connected in flash mode
11/031/2012 19:31:59 - INFO - Selected ST15i_4.0.A.2.368__GENERIC_(1244-2098).ftf
11/031/2012 19:31:59 - INFO - Preparing files for flashing
11/032/2012 19:32:01 - INFO - Please connect your device into flashmode.
11/032/2012 19:32:01 - INFO - Opening device for R/W
11/032/2012 19:32:02 - INFO - Reading device information
11/032/2012 19:32:02 - INFO - Phone reading for flashing.
11/032/2012 19:32:02 - INFO - Start Flashing
11/032/2012 19:32:02 - INFO - Flashing loader
11/032/2012 19:32:04 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
11/032/2012 19:32:04 - INFO - Flashing adsp.sin
11/032/2012 19:32:07 - INFO - Flashing kernel.sin
11/032/2012 19:32:09 - INFO - Flashing amss_fs.sin
11/032/2012 19:32:09 - INFO - Flashing fota1.sin
11/032/2012 19:32:10 - INFO - Flashing fota0.sin
11/032/2012 19:32:10 - INFO - Flashing apps_log.sin
11/032/2012 19:32:10 - INFO - Flashing amss.sin
11/032/2012 19:32:19 - INFO - Flashing cache.sin
11/032/2012 19:32:20 - INFO - Flashing system.sin
11/034/2012 19:34:12 - INFO - Flashing userdata.sin
11/034/2012 19:34:15 - INFO - Flashing finished.
11/034/2012 19:34:15 - INFO - Please wait. Phone will reboot
11/034/2012 19:34:15 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
11/034/2012 19:34:16 - INFO - Device connected in flash mode
11/034/2012 19:34:17 - INFO - Device disconnected
11/034/2012 19:34:18 - INFO - Device connected in flash mode
11/034/2012 19:34:59 - INFO - Device disconnected
11/035/2012 19:35:01 - INFO - Device connected in flash mode
11/035/2012 19:35:41 - INFO - Device disconnected
11/035/2012 19:35:42 - INFO - Device connected in flash mode
11/036/2012 19:36:23 - INFO - Device disconnected
11/036/2012 19:36:24 - INFO - Device connected in flash mode
11/037/2012 19:37:04 - INFO - Device disconnected
Click to expand...
Click to collapse
The Symptoms are the following:
Device not booting, when pressing the power button the phone vibrates for one second, nothing happens. The green light blinks.
When connecting the phone to the PC, it immediately starts the flashmode
When trying to connect it in fastboot mode (blue light) nothing happens. After releasing the up volume button, the phone connects in flashmode
When trying to use PC Companion, I get a window asking for unplugging the phone, remove the battery, insert the battery again and reboot. It does not reboot
When being connected with the PC, the phone exits and reenters the the flashmode each 1 minute.
I know I am just the N-th noob asking for help, but any hint is highly appreciated!
Regards,
Luca
P.s.: Sorry if some terms were not appropriate, I am not an expert
Unlocked bootloader and installing updates -> "Bricked"
There is a solution to this, need to find the right topic on the forum.
Someguyfromhell said:
Unlocked bootloader and installing updates -> "Bricked"
There is a solution to this, need to find the right topic on the forum.
Click to expand...
Click to collapse
Hey Someguyfromhell,
you made my day, my mobile phone is alive again
There is still one question, is there a solution to allow the updates to be installed again? Maybe by relock the bootloader or using the PC Companion?
Thanks a lot again!
http://forum.xda-developers.com/showpost.php?p=16659481&postcount=33 and look in the post for D) Relocking.
Seems, that if you used test point method, you can also relock via S1tool.
After that you can reflash stock firmware.
Almost same symptoms
Hi, I also think I've bricked my st15i.
What I've done:
-Unlocked bootloader
-Rooted
-Flashed custom rom
-Everything was working
Then with no reason, the phone started rebooting. It managed to boot and after 10sec - 1min it restarted again.
To solve this I:
- flashed stock rom and it stopped rebooting but as soon as I plugged it off the usb it rebooted and could not boot (it was looping sony logo and back).
- flashed other stock firmware, the same results
- now when connecting it to pc it goes directly to flashmode
- I can enter fastboot mode as well
- When pressing power button green led blinks
- tried flashing stock firmware again and then both the xperia_relock_bootloader.ftf and Xperia 2011 Range_FreeXperia_ALL.ftf with no results
- when connected to pc it goes only to flashmode (Can't make it to start)
- when pluged in the socket it starts looping up to sony logo
- when not pluged at all when I press power button, green led blinks
I hope you can make any sense out of this because I can't, and I've been trying solutions the past 36hours!!
Please...help!!

[Help] Xperia Mini Pro SK17i not powering on after update

hi friends
i was trying to update xperia mini pro sk17i (1250-3615) to ICS official
it went well phone booted to ICS but i wanted to root it. (rooting failed even when in GB with all the possible methods Doomlord/Xperia-root/flashtool )
then triend to collect all the files from firmware folder of sony pc companion and made a ftf file using flashtool decrypt /bundle .
flashed it worked fine for first two times... then unlocked the boot loader using sony unlock code from the site.
now .. i was trying different kernel / pre rooted and was boot looping .. so flashed back to .431 ftf and laptop just went off towards the end.
phone not powering on. not recognised as a usb device. But once in a while it comes to flash mode ( green light vol-down usb state ) and i finally was able to use flashtool and this much happened
12/014/2012 13:14:26 - INFO - <- This level is successfully initialized
12/014/2012 13:14:26 - INFO - Flashtool Version 0.8.6.0 built on 2012-06-13 08:08:54
12/014/2012 13:14:26 - INFO - You can drag and drop ftf files here to start flashing them
12/014/2012 13:14:31 - INFO - Device connected in flash mode
12/014/2012 13:14:45 - INFO - Selected SK17i_4.1.B.0.431__1250-3615_.ftf
12/014/2012 13:14:45 - INFO - Preparing files for flashing
12/015/2012 13:15:00 - INFO - Device disconnected
12/015/2012 13:15:01 - INFO - Please connect your device into flashmode.
12/017/2012 13:17:09 - INFO - Device connected in flash mode
12/017/2012 13:17:09 - INFO - Opening device for R/W
12/017/2012 13:17:09 - INFO - Reading device information
12/017/2012 13:17:09 - INFO - Phone ready for flashmode operations.
12/017/2012 13:17:10 - INFO - Start Flashing
12/017/2012 13:17:10 - INFO - Flashing loader
12/017/2012 13:17:12 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTED
12/017/2012 13:17:12 - WARN - This file is ignored : simlock.ta
12/017/2012 13:17:12 - INFO - Flashing kernel.sin
12/017/2012 13:17:15 - INFO - Flashing fota1.sin
12/017/2012 13:17:15 - INFO - Flashing fota0.sin
12/017/2012 13:17:16 - INFO - Flashing adsp.sin
12/017/2012 13:17:19 - INFO - Flashing amss_fs_mango.sin
12/017/2012 13:17:19 - INFO - Flashing amss.sin
12/017/2012 13:17:28 - INFO - Flashing apps_log.sin
12/017/2012 13:17:28 - INFO - Flashing system.sin
12/020/2012 13:20:28 - INFO - Flashing userdata.sin
12/020/2012 13:20:31 - INFO - Flashing cache.sin
12/020/2012 13:20:31 - INFO - Ending flash session
12/020/2012 13:20:31 - INFO - Flashing finished.
12/020/2012 13:20:31 - INFO - Please wait. Phone will reboot
12/020/2012 13:20:31 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
12/020/2012 13:20:32 - INFO - Device connected in flash mode
12/020/2012 13:20:54 - INFO - Device disconnected
12/023/2012 13:23:17 - INFO - Log written to E:\Flashtool\flashtool_2012-07-12_01-14-26.log
Click to expand...
Click to collapse
but still phone not powering on.. its the red light blinks 3 to 4 times and nothing happens.please shed some light
my own phone is FIH FBO (huawei x6 variant ) and i am active in that section... i have tried all the possible recovery methods i can find..
Did you try repairing with PC Companion after the last flashing session?
Don't know how much it would help, though.
1º Usually when you have the 3 red blink means no battery. You have to put your phone charging and nothing will appear on screen. Only after 10 or 20 minutes when battery reach good level.
2º If point 1 is not enough probably you installed kernel for custom rom that might be not compatible with the version you flashed. Try to go to Fastboot mode (blue light vol-up usb state) and install original kernel.
Good Luck
(i'm quite sure is the battery,if you can just grab a voltimeter and check your battery, if value is lower than 3,8v for sure you need to charge|)
thanks buddy for the quick response ..connected it to the charger keeping it for some time(but it was always connected to laptop usb whole time ). lets hope its the battery now. But i have done some cross flashing too earlier.
can you please point me to the original kernel. (but blue light fastboot mode too not coming up now. )
for this particular phone all the threads are so messed up reading finding each compatible ones is taking so much time.. most of the links are dead /suspended too.
sometimes when i flash this (SK17i_4.0.2.A.0.62_Baseband+Kernel.ftf) i get to the sony splash screen and xperia it will show and keep boot looping ..this guy here also tried the same had similar outcome. This thread
Feanor88 said:
Did you try repairing with PC Companion after the last flashing session?
Don't know how much it would help, though.
Click to expand...
Click to collapse
yes one time i got a repair option and i tried it. says the phone has a modified rom / so repair is not possible. (mostly because of the kernel +baseband flash ) and its very rarely comes to flash mode.
brov just reflash but dont use Flashtool v0.8.6, use v0.8.5 but make yhu charge tha phone first...
this is the latest happening ... and i strongly believe its the battery
12/018/2012 15:18:12 - INFO - <- This level is successfully initialized
12/018/2012 15:18:12 - INFO - Flashtool Version 0.8.6.0 built on 2012-06-13 08:08:54
12/018/2012 15:18:12 - INFO - You can drag and drop ftf files here to start flashing them
12/018/2012 15:18:18 - INFO - Device disconnected
12/018/2012 15:18:24 - INFO - Device connected in flash mode
12/018/2012 15:18:49 - INFO - Selected Xperia MiniPro (SK17i)_4.0.2.A.0.42_HU.ftf
12/018/2012 15:18:49 - INFO - Preparing files for flashing
12/019/2012 15:19:00 - INFO - Please connect your device into flashmode.
12/019/2012 15:19:01 - INFO - Opening device for R/W
12/019/2012 15:19:02 - INFO - Reading device information
12/019/2012 15:19:04 - INFO - Start Flashing
12/019/2012 15:19:04 - INFO - Flashing loader
12/019/2012 15:19:04 - INFO - Ending flash session
12/019/2012 15:19:04 - ERROR -
12/019/2012 15:19:04 - ERROR - Error flashing. Aborted
12/019/2012 15:19:04 - INFO - Device disconnected
12/020/2012 15:20:48 - INFO - Device connected with USB debugging off
12/020/2012 15:20:48 - INFO - For 2011 devices line, be sure you are not in MTP mode
12/021/2012 15:21:07 - INFO - Device disconnected
Click to expand...
Click to collapse
i just saw the phone booting into splash / xperia / and then i heard saw the android home for a sec and battery went down phone got off.
kept for charging
thanks buddies... one thing is sure battery was down.. i was thinking its full charged since plugged to pc whole night. (wrong !!) then the second thought is .. does the recent booting into android home mean ( 12/019/2012 15:19:04 - INFO - Flashing loader) a temporary boot from the new kernel ? still hope is there rite ??
zailer said:
thanks buddy for the quick response ..connected it to the charger keeping it for some time(but it was always connected to laptop usb whole time ). lets hope its the battery now. But i have done some cross flashing too earlier.
can you please point me to the original kernel. (but blue light fastboot mode too not coming up now. )
for this particular phone all the threads are so messed up reading finding each compatible ones is taking so much time.. most of the links are dead /suspended too.
sometimes when i flash this (SK17i_4.0.2.A.0.62_Baseband+Kernel.ftf) i get to the sony splash screen and xperia it will show and keep boot looping ..this guy here also tried the same had similar outcome. This thread
yes one time i got a repair option and i tried it. says the phone has a modified rom / so repair is not possible. (mostly because of the kernel +baseband flash ) and its very rarely comes to flash mode.
Click to expand...
Click to collapse
If you would read correctly, then you would see that .ftf file included only Baseband and Kernel, nothing more, nothing less.
zailer said:
this is the latest happening ... and i strongly believe its the battery
i just saw the phone booting into splash / xperia / and then i heard saw the android home for a sec and battery went down phone got off.
kept for charging
thanks buddies... one thing is sure battery was down.. i was thinking its full charged since plugged to pc whole night. (wrong !!) then the second thought is .. does the recent booting into android home mean ( 12/019/2012 15:19:04 - INFO - Flashing loader) a temporary boot from the new kernel ? still hope is there rite ??
Click to expand...
Click to collapse
Remove USB cable, choose the .ftf file with Flashtool, connect the phone in flashmode when Flashtool asks it.

XPERIA X10i DEAD!?! NEED HELP WONT TURN ON!!

Hi there, I'm new to this forum and just need some help with my Xperia x10i.
Basicly when i put it on charge i get a green led light for like 30 seconds and then the led goes off. I also sometimes when im turning the phone on get 3 red lights which blink, other times when i try to turn the phone on it just vibrates and a green light flashes for like a millisecond. I really don't know whats wrong with the phone and if it can be repaired. I have tried to update it using PC companion but it keeps coming up with an error half way through the update, i have also tried to update it using update service but just like PC companion when its installing the software it installs a bit then comes up saying it cant install the software on my phone. I have also tried to flash the phone using flash tool and using Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.ftf but it keeps saying error and that i need to turn on USB debugging which i cant do as the phone wont come on. Other times flash tool will just freeze when its installing system.sis. Please help me i really want to bring this phone back to life. Any help would be appreciated and if you need more info plz let me know. Thanks
Hello)
1) Change battery
2) Coonect phone to charge without battery. ~15-20 mins
3) Flash ROM via FlashTool =)
Try doing it like this;
1.Without connecting charger, Power on the Phone until it vibrates
2.Connect charger immediately to prevent it from shutting down because of low power
3.Wait until your phone reboots...hope it helps...
gil2004xp said:
Try doing it like this;
1.Without connecting charger, Power on the Phone until it vibrates
2.Connect charger immediately to prevent it from shutting down because of low power
3.Wait until your phone reboots...hope it helps...
Click to expand...
Click to collapse
Have done but still no luck , what else can i do to fix the phone? i really need it fixed. Thanks for the help btw
Leave it for a while on the charger.
After a hour it wil start up again.
any news
nicemusa said:
Have done but still no luck , what else can i do to fix the phone? i really need it fixed. Thanks for the help btw
Click to expand...
Click to collapse
hello,
have you fixed your phone ?
because i have the same issue.
Please help to fix it!
nicemusa said:
Hi there, I'm new to this forum and just need some help with my Xperia x10i.
Basicly when i put it on charge i get a green led light for like 30 seconds and then the led goes off. I also sometimes when im turning the phone on get 3 red lights which blink, other times when i try to turn the phone on it just vibrates and a green light flashes for like a millisecond. I really don't know whats wrong with the phone and if it can be repaired. I have tried to update it using PC companion but it keeps coming up with an error half way through the update, i have also tried to update it using update service but just like PC companion when its installing the software it installs a bit then comes up saying it cant install the software on my phone. I have also tried to flash the phone using flash tool and using Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.ftf but it keeps saying error and that i need to turn on USB debugging which i cant do as the phone wont come on. Other times flash tool will just freeze when its installing system.sis. Please help me i really want to bring this phone back to life. Any help would be appreciated and if you need more info plz let me know. Thanks
Click to expand...
Click to collapse
I have the same problem!
Please help!!
Erkaft95 said:
I have the same problem!
Please help!!
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?p=36277073
teddymild said:
Try this http://forum.xda-developers.com/showthread.php?p=36277073
Click to expand...
Click to collapse
My bootloader on this phone is locked!
But today morning I flash via fllashtool X10i_3.0.1.G.0.75_CUST-NL GENERIC 1234-8547.ftf
13/002/2013 12:02:00 - INFO - Selected X10i_3.0.1.G.0.75_CUST-NL GENERIC 1234-8547.ftf
13/002/2013 12:02:00 - INFO - Preparing files for flashing
13/002/2013 12:02:05 - INFO - Device connected in flash mode
13/002/2013 12:02:08 - INFO - Device disconnected
13/002/2013 12:02:11 - INFO - Please connect your device into flashmode.
13/002/2013 12:02:13 - INFO - Device connected in flash mode
13/002/2013 12:02:13 - INFO - Opening device for R/W
13/002/2013 12:02:13 - INFO - Reading device information
13/002/2013 12:02:13 - INFO - Phone ready for flashmode operations.
13/002/2013 12:02:13 - INFO - Current device : X10i - CB511J866B - 1234-4762_R16A - 1227-4612_R2BA026 - 1227-4607_R2BA026
13/002/2013 12:02:13 - INFO - Start Flashing
13/002/2013 12:02:13 - INFO - Processing loader
13/002/2013 12:02:13 - INFO - Checking header
13/002/2013 12:02:13 - INFO - Flashing data
13/002/2013 12:02:14 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE
13/002/2013 12:02:14 - INFO - Processing kernel.sin
13/002/2013 12:02:14 - INFO - Checking header
13/002/2013 12:02:15 - INFO - Flashing data
13/002/2013 12:02:17 - INFO - Processing fota0.sin
13/002/2013 12:02:17 - INFO - Checking header
13/002/2013 12:02:17 - INFO - Flashing data
13/002/2013 12:02:18 - INFO - Processing fota1.sin
13/002/2013 12:02:18 - INFO - Checking header
13/002/2013 12:02:18 - INFO - Flashing data
13/002/2013 12:02:19 - INFO - Processing dsp1.sin
13/002/2013 12:02:19 - INFO - Checking header
13/002/2013 12:02:19 - INFO - Flashing data
13/002/2013 12:02:26 - INFO - Processing amss.sin
13/002/2013 12:02:26 - INFO - Checking header
13/002/2013 12:02:26 - INFO - Flashing data
13/002/2013 12:02:38 - INFO - Processing amss_fs.sin
13/002/2013 12:02:38 - INFO - Checking header
13/002/2013 12:02:38 - INFO - Flashing data
13/002/2013 12:02:38 - INFO - Processing system.sin
13/002/2013 12:02:38 - INFO - Checking header
13/002/2013 12:02:38 - INFO - Flashing data
13/005/2013 12:05:12 - INFO - Processing userdata.sin
13/005/2013 12:05:12 - INFO - Checking header
13/005/2013 12:05:12 - INFO - Flashing data
13/005/2013 12:05:15 - INFO - Processing cache.sin
13/005/2013 12:05:15 - INFO - Checking header
13/005/2013 12:05:15 - INFO - Flashing data
13/005/2013 12:05:15 - INFO - Ending flash session
13/005/2013 12:05:15 - INFO - Flashing finished.
13/005/2013 12:05:15 - INFO - Please unplug and start your phone
13/005/2013 12:05:15 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
13/005/2013 12:05:16 - INFO - Device connected in flash mode
13/007/2013 12:07:09 - INFO - Device disconnected
But the phone don't boot up!
May be the problem might be with the lcd . Put a sim card , after switching on the phone after 3 minutes call that number , See whether the phone rings . If the phone rings , it might be the lcd problem . Can u kindly confirm it .
Thanks
hi brother iam so sory for my bad english i have the same preblem i enchour you that your boot loader is dead the same with mee to solve it you need to flash the bootloader with medusa box or s1tool if you dont have mony to buy the box use s1 tool then you have to remove the model stiker behande the battery and serch on internet for gnd and test piont for the x10i then folow this enstraction 1.open s1 tool 2.then clik in patch semcboot 3.folow the red instraction displayed on s1 tool the test piont should be atatched to the gnd pin with a metal piec then press test piont redy and it should start flashing after the prosses is finished you may diconect the phone and boot it but it dosent boot stock sony logo after that part avery thing is easy then flash the phone frimware with sony flashtool and thats it .if you asked me where i find the gnd and test piont iam now searching for it as soon i get it i will reply to this thanks to laser for creating this tool report your secsess .:good:
I put new battery in to x10i but still the red light is brinks 3times no power

[Q] Mini Pro soft bricked

So recently my friends phone bricked, when he tried turning it on, it did nothing, only a red LED started flashing. I tried to flash to original rom in flashtool, it gave me this error
21/052/2013 13:52:09 - INFO - <- This level is successfully initialized
21/052/2013 13:52:09 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
21/052/2013 13:52:15 - INFO - Device disconnected
21/053/2013 13:53:21 - INFO - Selected SK17i / 4.1.B.0.431 / (1249-7380)
21/053/2013 13:53:21 - INFO - Preparing files for flashing
21/053/2013 13:53:38 - INFO - Please connect your device into flashmode.
21/053/2013 13:53:51 - INFO - Device connected in flash mode
21/053/2013 13:53:52 - INFO - Opening device for R/W
21/053/2013 13:53:52 - INFO - Start Flashing
21/053/2013 13:53:52 - INFO - Processing loader
21/053/2013 13:53:52 - INFO - Checking header
21/053/2013 13:53:52 - INFO - Ending flash session
21/053/2013 13:53:52 - ERROR -
21/053/2013 13:53:52 - ERROR - Error flashing. Aborted
21/053/2013 13:53:52 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Next I tried to flash an unbrick .ftf, found here, same error:
21/003/2013 15:03:39 - INFO - <- This level is successfully initialized
21/003/2013 15:03:39 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
21/003/2013 15:03:44 - INFO - Device disconnected
21/003/2013 15:03:47 - INFO - Selected Xperia 2011 Range / FreeXperia / ALL
21/003/2013 15:03:47 - INFO - Preparing files for flashing
21/003/2013 15:03:47 - INFO - Please connect your device into flashmode.
21/004/2013 15:04:42 - INFO - Device connected in flash mode
21/004/2013 15:04:42 - INFO - Opening device for R/W
21/004/2013 15:04:42 - INFO - Start Flashing
21/004/2013 15:04:42 - INFO - Processing loader
21/004/2013 15:04:42 - INFO - Checking header
21/004/2013 15:04:42 - INFO - Ending flash session
21/004/2013 15:04:42 - ERROR -
21/004/2013 15:04:42 - ERROR - Error flashing. Aborted
21/004/2013 15:04:42 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Any other ideas ? Its a Sony Ericsson Mini Pro (Sk17i), rooted, bootloader unlocked, CyanogenMod 10 installed.
ok, I just found out that the red led blinking was because the battery was empty, I put my phone battery in, tried turning it on and now a pink led truns on for a sec and the screen turns on but after that it doesn't do anything. I tried flashing it and it keeps saying the same message (see post above)
any help?
Ok Now First Select The Firmware flash settings like everything you do eg. press bolt icon -select ftf-press ok
.
.
.
now only connect ur phone when u r asked nt before
.
Remove the battery 15 minutes and while the battery is not often followed press Power button
poce flastool and all things necessary on the desktop of your PC, antivirus and also disables the test with patience.
dcf007 said:
So recently my friends phone bricked, when he tried turning it on, it did nothing, only a red LED started flashing. I tried to flash to original rom in flashtool, it gave me this error
Next I tried to flash an unbrick .ftf, found here, same error:
Any other ideas ? Its a Sony Ericsson Mini Pro (Sk17i), rooted, bootloader unlocked, CyanogenMod 10 installed.
Click to expand...
Click to collapse
U said its bootloader unlocked so flash some other kernel and boot into CWM..
Try this and tell me if it works..
Regards
dcf007 said:
ok, I just found out that the red led blinking was because the battery was empty, I put my phone battery in, tried turning it on and now a pink led truns on for a sec and the screen turns on but after that it doesn't do anything. I tried flashing it and it keeps saying the same message (see post above)
any help?
Click to expand...
Click to collapse
pink led means kernel working. like said charge ur phone (simply but in cable it even must be on) for abot 15-30 mins after that try accesing CWM. if no kernel boot, make sure a) u get into fastboot (press vol down while plugging off phone to pc->blue led will lit) --> flash a other kernel any try acess cwm (try install rom if u get int cwm, choose a stable rom, u can transfer files via cwm mount storage option)
b) try get into flashmode (same way but vol down) if work --> power off phone, use the install (stock) .587 fw tutorial on Aneel's and saqibs honami rom (find there link in install desc.) --> use files and tut by sony forum in flashtool, dont connect phone , leave it off. set up flashtool like mentioned a popscrren will pop up then connect via flashmode
hope it works
a|\|droid_user said:
U said its bootloader unlocked so flash some other kernel and boot into CWM..
Try this and tell me if it works..
Regards
Click to expand...
Click to collapse
I flashed cyanogenmod 7, but again, when I power on the phone a pink led blinked, the screen turns brighter and thats it, it doesn't do anything after that. Also when I try to boot into CWM it does the same...
dcf007 said:
I flashed cyanogenmod 7, but again, when I power on the phone a pink led blinked, the screen turns brighter and thats it, it doesn't do anything after that. Also when I try to boot into CWM it does the same...
Click to expand...
Click to collapse
Which kernel are you using?
Press and hold vol down,connect usb cable does the led turn green?
a|\|droid_user said:
Which kernel are you using?
Press and hold vol down,connect usb cable does the led turn green?
Click to expand...
Click to collapse
There is CyanogenMod 10 on installed but I flashed kernel CyanogenMod 7 couple of hours ago, and yes it turns green
dcf007 said:
There is CyanogenMod 10 on installed but I flashed kernel CyanogenMod 7 couple of hours ago, and yes it turns green
Click to expand...
Click to collapse
Alright now we know that your flashmode is working..
Try this get hold of your phone's stock kernel..
Press the vol up button and connect your phone..The led should turn blue.
Regards
a|\|droid_user said:
Alright now we know that your flashmode is working..
Try this get hold of your phone's stock kernel..
Press the vol up button and connect your phone..The led should turn blue.
Click to expand...
Click to collapse
yeah it does, now I'm in fastboot right, what now? (I cant test this today though, have to wait till tomorrow, (european time))
dcf007 said:
yeah it does, now I'm in fastboot right, what now? (I cant test this today though, have to wait till tomorrow, (european time))
Click to expand...
Click to collapse
Flash the Stock kernel with fastboot..make sure you have got CWM on it..
So that you can install another ROM through CWM.Got it?
a|\|droid_user said:
Flash the Stock kernel with fastboot..make sure you have got CWM on it..
So that you can install another ROM through CWM.Got it?
Click to expand...
Click to collapse
yeah, gonna try it tomorrow
dcf007 said:
yeah, gonna try it tomorrow
Click to expand...
Click to collapse
Good luck.
a|\|droid_user said:
Good luck.
Click to expand...
Click to collapse
No luck, flashed the stock kernel but the phone wont boot, even not in cwm, but when I left the cable pluged in to my pc and flashtool was open, there was some weird stuff going on..
23/011/2013 18:11:59 - INFO - <- This level is successfully initialized
23/011/2013 18:11:59 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
23/012/2013 18:12:04 - INFO - Device connected with USB debugging on
23/012/2013 18:12:06 - INFO - Connected device : SonyEricson Xperia Mini Pro
23/012/2013 18:12:06 - INFO - Installed version of busybox : N/A
23/012/2013 18:12:06 - INFO - Android version : 4.0.4 / kernel version : / Build number : 4.1.B.0.587
23/012/2013 18:12:06 - INFO - Phone in recovery mode
23/012/2013 18:12:06 - INFO - Root Access Allowed
23/012/2013 18:12:06 - INFO - Device disconnected
23/012/2013 18:12:26 - INFO - Device connected with USB debugging off
23/012/2013 18:12:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
23/012/2013 18:12:31 - INFO - Device disconnected
23/012/2013 18:12:33 - INFO - Device connected with USB debugging on
23/012/2013 18:12:34 - INFO - Connected device : SonyEricson Xperia Mini Pro
23/012/2013 18:12:34 - INFO - Installed version of busybox : BusyBox v1.18.5 (2011-07-18 07:43:28 PDT) multi-call binary.
23/012/2013 18:12:34 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf / Build number : 4.1.B.0.587
23/012/2013 18:12:34 - INFO - Checking root access
23/012/2013 18:12:36 - INFO - Root access denied
23/012/2013 18:12:37 - INFO - Device disconnected
Click to expand...
Click to collapse
btw, I did not disconect the device.
dcf007 said:
No luck, flashed the stock kernel but the phone wont boot, even not in cwm, but when I left the cable pluged in to my pc and flashtool was open, there was some weird stuff going on..
btw, I did not disconect the device.
Click to expand...
Click to collapse
Flash extended stock kernel..any kernel with CWM not the completely stock one..
I dont see a fastboot mode over there..
Connect USB cable while holding the vol up button..see if the led turns blue and then flash the kernel..
Give me the log of kernel flash..
a|\|droid_user said:
Flash extended stock kernel..any kernel with CWM not the completely stock one..
I dont see a fastboot mode over there..
Connect USB cable while holding the vol up button..see if the led turns blue and then flash the kernel..
Give me the log of kernel flash..
Click to expand...
Click to collapse
this is the log:
23/014/2013 20:14:08 - INFO - <- This level is successfully initialized
23/014/2013 20:14:08 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
23/014/2013 20:14:13 - INFO - Device disconnected
23/014/2013 20:14:14 - INFO - Device connected in fastboot mode
23/014/2013 20:14:50 - INFO - Selected kernel (boot.img or kernel.sin): C:\Users\DCF007\Downloads\boot_EXtendedStockKernel_SK17i-v2.img
23/014/2013 20:14:50 - INFO - Flashing selected kernel
23/014/2013 20:14:52 - INFO - sending 'boot' (7450 KB)...
23/014/2013 20:14:52 - INFO - (bootloader) USB download speed was 9693kB/s
23/014/2013 20:14:52 - INFO - OKAY [ 0.794s]
23/014/2013 20:14:52 - INFO - writing 'boot'...
23/014/2013 20:14:52 - INFO - (bootloader) Download buffer format: boot IMG
23/014/2013 20:14:52 - INFO - (bootloader) Flash of partition 'boot' requested
23/014/2013 20:14:52 - INFO - (bootloader) S1 partID 0x00000003, block 0x00000280-0x000002e3
23/014/2013 20:14:52 - INFO - (bootloader) Erase operation complete, 0 bad blocks encountered
23/014/2013 20:14:52 - INFO - (bootloader) Flashing...
23/014/2013 20:14:52 - INFO - (bootloader) Flash operation complete
23/014/2013 20:14:52 - INFO - OKAY [ 1.457s]
23/014/2013 20:14:52 - INFO - finished. total time: 2.268s
23/014/2013 20:14:52 - INFO - FASTBOOT Output:
sending 'boot' (7450 KB)...
(bootloader) USB download speed was 9693kB/s
OKAY [ 0.794s]
writing 'boot'...
(bootloader) Download buffer format: boot IMG
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x00000280-0x000002e3
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 1.457s]
finished. total time: 2.268s
23/014/2013 20:14:52 - INFO - Please check the log before rebooting into system
Click to expand...
Click to collapse
still nothing on the screen
dcf007 said:
this is the log:
still nothing on the screen
Click to expand...
Click to collapse
Can you see the boot logo(The first logo not the boot animation)..can you enter CWM by pressing vol down when the phone starts up?
a|\|droid_user said:
Can you see the boot logo(The first logo not the boot animation)..can you enter CWM by pressing vol down when the phone starts up?
Click to expand...
Click to collapse
No and no, when I turn on the phone a pink led blinks for a second and the screen turns brighter and thats it, it stays bright, cant turn it off by holding the power button, I have to take the battery out of the phone to turn the device off. The same goes with entering cwm
dcf007 said:
No and no, when I turn on the phone a pink led blinks for a second and the screen turns brighter and thats it, it stays bright, cant turn it off by holding the power button, I have to take the battery out of the phone to turn the device off. The same goes with entering cwm
Click to expand...
Click to collapse
Try some other battery..see if it boots on..if u cant boot into cwm and all u see is a blank screen..then i feel its hardware related..
This might help:http://forum.xda-developers.com/showthread.php?t=1149856
Regards..

Categories

Resources