So recently my friends phone bricked, when he tried turning it on, it did nothing, only a red LED started flashing. I tried to flash to original rom in flashtool, it gave me this error
21/052/2013 13:52:09 - INFO - <- This level is successfully initialized
21/052/2013 13:52:09 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
21/052/2013 13:52:15 - INFO - Device disconnected
21/053/2013 13:53:21 - INFO - Selected SK17i / 4.1.B.0.431 / (1249-7380)
21/053/2013 13:53:21 - INFO - Preparing files for flashing
21/053/2013 13:53:38 - INFO - Please connect your device into flashmode.
21/053/2013 13:53:51 - INFO - Device connected in flash mode
21/053/2013 13:53:52 - INFO - Opening device for R/W
21/053/2013 13:53:52 - INFO - Start Flashing
21/053/2013 13:53:52 - INFO - Processing loader
21/053/2013 13:53:52 - INFO - Checking header
21/053/2013 13:53:52 - INFO - Ending flash session
21/053/2013 13:53:52 - ERROR -
21/053/2013 13:53:52 - ERROR - Error flashing. Aborted
21/053/2013 13:53:52 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Next I tried to flash an unbrick .ftf, found here, same error:
21/003/2013 15:03:39 - INFO - <- This level is successfully initialized
21/003/2013 15:03:39 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
21/003/2013 15:03:44 - INFO - Device disconnected
21/003/2013 15:03:47 - INFO - Selected Xperia 2011 Range / FreeXperia / ALL
21/003/2013 15:03:47 - INFO - Preparing files for flashing
21/003/2013 15:03:47 - INFO - Please connect your device into flashmode.
21/004/2013 15:04:42 - INFO - Device connected in flash mode
21/004/2013 15:04:42 - INFO - Opening device for R/W
21/004/2013 15:04:42 - INFO - Start Flashing
21/004/2013 15:04:42 - INFO - Processing loader
21/004/2013 15:04:42 - INFO - Checking header
21/004/2013 15:04:42 - INFO - Ending flash session
21/004/2013 15:04:42 - ERROR -
21/004/2013 15:04:42 - ERROR - Error flashing. Aborted
21/004/2013 15:04:42 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Any other ideas ? Its a Sony Ericsson Mini Pro (Sk17i), rooted, bootloader unlocked, CyanogenMod 10 installed.
ok, I just found out that the red led blinking was because the battery was empty, I put my phone battery in, tried turning it on and now a pink led truns on for a sec and the screen turns on but after that it doesn't do anything. I tried flashing it and it keeps saying the same message (see post above)
any help?
Ok Now First Select The Firmware flash settings like everything you do eg. press bolt icon -select ftf-press ok
.
.
.
now only connect ur phone when u r asked nt before
.
Remove the battery 15 minutes and while the battery is not often followed press Power button
poce flastool and all things necessary on the desktop of your PC, antivirus and also disables the test with patience.
dcf007 said:
So recently my friends phone bricked, when he tried turning it on, it did nothing, only a red LED started flashing. I tried to flash to original rom in flashtool, it gave me this error
Next I tried to flash an unbrick .ftf, found here, same error:
Any other ideas ? Its a Sony Ericsson Mini Pro (Sk17i), rooted, bootloader unlocked, CyanogenMod 10 installed.
Click to expand...
Click to collapse
U said its bootloader unlocked so flash some other kernel and boot into CWM..
Try this and tell me if it works..
Regards
dcf007 said:
ok, I just found out that the red led blinking was because the battery was empty, I put my phone battery in, tried turning it on and now a pink led truns on for a sec and the screen turns on but after that it doesn't do anything. I tried flashing it and it keeps saying the same message (see post above)
any help?
Click to expand...
Click to collapse
pink led means kernel working. like said charge ur phone (simply but in cable it even must be on) for abot 15-30 mins after that try accesing CWM. if no kernel boot, make sure a) u get into fastboot (press vol down while plugging off phone to pc->blue led will lit) --> flash a other kernel any try acess cwm (try install rom if u get int cwm, choose a stable rom, u can transfer files via cwm mount storage option)
b) try get into flashmode (same way but vol down) if work --> power off phone, use the install (stock) .587 fw tutorial on Aneel's and saqibs honami rom (find there link in install desc.) --> use files and tut by sony forum in flashtool, dont connect phone , leave it off. set up flashtool like mentioned a popscrren will pop up then connect via flashmode
hope it works
a|\|droid_user said:
U said its bootloader unlocked so flash some other kernel and boot into CWM..
Try this and tell me if it works..
Regards
Click to expand...
Click to collapse
I flashed cyanogenmod 7, but again, when I power on the phone a pink led blinked, the screen turns brighter and thats it, it doesn't do anything after that. Also when I try to boot into CWM it does the same...
dcf007 said:
I flashed cyanogenmod 7, but again, when I power on the phone a pink led blinked, the screen turns brighter and thats it, it doesn't do anything after that. Also when I try to boot into CWM it does the same...
Click to expand...
Click to collapse
Which kernel are you using?
Press and hold vol down,connect usb cable does the led turn green?
a|\|droid_user said:
Which kernel are you using?
Press and hold vol down,connect usb cable does the led turn green?
Click to expand...
Click to collapse
There is CyanogenMod 10 on installed but I flashed kernel CyanogenMod 7 couple of hours ago, and yes it turns green
dcf007 said:
There is CyanogenMod 10 on installed but I flashed kernel CyanogenMod 7 couple of hours ago, and yes it turns green
Click to expand...
Click to collapse
Alright now we know that your flashmode is working..
Try this get hold of your phone's stock kernel..
Press the vol up button and connect your phone..The led should turn blue.
Regards
a|\|droid_user said:
Alright now we know that your flashmode is working..
Try this get hold of your phone's stock kernel..
Press the vol up button and connect your phone..The led should turn blue.
Click to expand...
Click to collapse
yeah it does, now I'm in fastboot right, what now? (I cant test this today though, have to wait till tomorrow, (european time))
dcf007 said:
yeah it does, now I'm in fastboot right, what now? (I cant test this today though, have to wait till tomorrow, (european time))
Click to expand...
Click to collapse
Flash the Stock kernel with fastboot..make sure you have got CWM on it..
So that you can install another ROM through CWM.Got it?
a|\|droid_user said:
Flash the Stock kernel with fastboot..make sure you have got CWM on it..
So that you can install another ROM through CWM.Got it?
Click to expand...
Click to collapse
yeah, gonna try it tomorrow
dcf007 said:
yeah, gonna try it tomorrow
Click to expand...
Click to collapse
Good luck.
a|\|droid_user said:
Good luck.
Click to expand...
Click to collapse
No luck, flashed the stock kernel but the phone wont boot, even not in cwm, but when I left the cable pluged in to my pc and flashtool was open, there was some weird stuff going on..
23/011/2013 18:11:59 - INFO - <- This level is successfully initialized
23/011/2013 18:11:59 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
23/012/2013 18:12:04 - INFO - Device connected with USB debugging on
23/012/2013 18:12:06 - INFO - Connected device : SonyEricson Xperia Mini Pro
23/012/2013 18:12:06 - INFO - Installed version of busybox : N/A
23/012/2013 18:12:06 - INFO - Android version : 4.0.4 / kernel version : / Build number : 4.1.B.0.587
23/012/2013 18:12:06 - INFO - Phone in recovery mode
23/012/2013 18:12:06 - INFO - Root Access Allowed
23/012/2013 18:12:06 - INFO - Device disconnected
23/012/2013 18:12:26 - INFO - Device connected with USB debugging off
23/012/2013 18:12:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
23/012/2013 18:12:31 - INFO - Device disconnected
23/012/2013 18:12:33 - INFO - Device connected with USB debugging on
23/012/2013 18:12:34 - INFO - Connected device : SonyEricson Xperia Mini Pro
23/012/2013 18:12:34 - INFO - Installed version of busybox : BusyBox v1.18.5 (2011-07-18 07:43:28 PDT) multi-call binary.
23/012/2013 18:12:34 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf / Build number : 4.1.B.0.587
23/012/2013 18:12:34 - INFO - Checking root access
23/012/2013 18:12:36 - INFO - Root access denied
23/012/2013 18:12:37 - INFO - Device disconnected
Click to expand...
Click to collapse
btw, I did not disconect the device.
dcf007 said:
No luck, flashed the stock kernel but the phone wont boot, even not in cwm, but when I left the cable pluged in to my pc and flashtool was open, there was some weird stuff going on..
btw, I did not disconect the device.
Click to expand...
Click to collapse
Flash extended stock kernel..any kernel with CWM not the completely stock one..
I dont see a fastboot mode over there..
Connect USB cable while holding the vol up button..see if the led turns blue and then flash the kernel..
Give me the log of kernel flash..
a|\|droid_user said:
Flash extended stock kernel..any kernel with CWM not the completely stock one..
I dont see a fastboot mode over there..
Connect USB cable while holding the vol up button..see if the led turns blue and then flash the kernel..
Give me the log of kernel flash..
Click to expand...
Click to collapse
this is the log:
23/014/2013 20:14:08 - INFO - <- This level is successfully initialized
23/014/2013 20:14:08 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
23/014/2013 20:14:13 - INFO - Device disconnected
23/014/2013 20:14:14 - INFO - Device connected in fastboot mode
23/014/2013 20:14:50 - INFO - Selected kernel (boot.img or kernel.sin): C:\Users\DCF007\Downloads\boot_EXtendedStockKernel_SK17i-v2.img
23/014/2013 20:14:50 - INFO - Flashing selected kernel
23/014/2013 20:14:52 - INFO - sending 'boot' (7450 KB)...
23/014/2013 20:14:52 - INFO - (bootloader) USB download speed was 9693kB/s
23/014/2013 20:14:52 - INFO - OKAY [ 0.794s]
23/014/2013 20:14:52 - INFO - writing 'boot'...
23/014/2013 20:14:52 - INFO - (bootloader) Download buffer format: boot IMG
23/014/2013 20:14:52 - INFO - (bootloader) Flash of partition 'boot' requested
23/014/2013 20:14:52 - INFO - (bootloader) S1 partID 0x00000003, block 0x00000280-0x000002e3
23/014/2013 20:14:52 - INFO - (bootloader) Erase operation complete, 0 bad blocks encountered
23/014/2013 20:14:52 - INFO - (bootloader) Flashing...
23/014/2013 20:14:52 - INFO - (bootloader) Flash operation complete
23/014/2013 20:14:52 - INFO - OKAY [ 1.457s]
23/014/2013 20:14:52 - INFO - finished. total time: 2.268s
23/014/2013 20:14:52 - INFO - FASTBOOT Output:
sending 'boot' (7450 KB)...
(bootloader) USB download speed was 9693kB/s
OKAY [ 0.794s]
writing 'boot'...
(bootloader) Download buffer format: boot IMG
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x00000280-0x000002e3
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 1.457s]
finished. total time: 2.268s
23/014/2013 20:14:52 - INFO - Please check the log before rebooting into system
Click to expand...
Click to collapse
still nothing on the screen
dcf007 said:
this is the log:
still nothing on the screen
Click to expand...
Click to collapse
Can you see the boot logo(The first logo not the boot animation)..can you enter CWM by pressing vol down when the phone starts up?
a|\|droid_user said:
Can you see the boot logo(The first logo not the boot animation)..can you enter CWM by pressing vol down when the phone starts up?
Click to expand...
Click to collapse
No and no, when I turn on the phone a pink led blinks for a second and the screen turns brighter and thats it, it stays bright, cant turn it off by holding the power button, I have to take the battery out of the phone to turn the device off. The same goes with entering cwm
dcf007 said:
No and no, when I turn on the phone a pink led blinks for a second and the screen turns brighter and thats it, it stays bright, cant turn it off by holding the power button, I have to take the battery out of the phone to turn the device off. The same goes with entering cwm
Click to expand...
Click to collapse
Try some other battery..see if it boots on..if u cant boot into cwm and all u see is a blank screen..then i feel its hardware related..
This might help:http://forum.xda-developers.com/showthread.php?t=1149856
Regards..
Related
Hi,
My X10 mini (E10i) was rooted some months ago.
I decide to install miniCM7.2, so I succesfully unlock the bootloader, then kernel flashing appears to be ok, but when I reboot it, it show a new big logo, and after a while, a kind of animated background was visible. But it loop indefinitely on this animation, freeze, screen become blank, then reloop ...
I can't reboot it, I can't remove the batterie (it's hidden into the device)
Help !
Here the logs:
11/018/2012 20:18:58 - INFO - <- This level is successfully initialized
11/018/2012 20:18:58 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
11/018/2012 20:18:58 - INFO - You can drag and drop ftf files here to start flashing them
11/019/2012 20:19:03 - INFO - Device disconnected
11/019/2012 20:19:24 - INFO - Selected E10_nAa-11_2.6.29.6-nAa-11.ftf
11/019/2012 20:19:24 - INFO - Preparing files for flashing
11/019/2012 20:19:24 - INFO - Please connect your device into flashmode.
11/020/2012 20:20:12 - INFO - Device connected in flash mode
11/020/2012 20:20:12 - INFO - Opening device for R/W
11/020/2012 20:20:13 - INFO - Reading device information
11/020/2012 20:20:13 - INFO - Phone reading for flashing.
11/020/2012 20:20:13 - INFO - Start Flashing
11/020/2012 20:20:13 - INFO - Flashing loader
11/020/2012 20:20:14 - INFO - Loader version : r4A060 / Bootloader status : ROOTED
11/020/2012 20:20:14 - INFO - Flashing kernel.sin
11/020/2012 20:20:16 - INFO - Flashing finished.
11/020/2012 20:20:16 - INFO - Please wait. Phone will reboot
11/020/2012 20:20:16 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
11/020/2012 20:20:16 - INFO - Device connected in flash mode
11/020/2012 20:20:18 - INFO - Device disconnected
11/020/2012 20:20:20 - INFO - Device connected in flash mode
11/020/2012 20:20:34 - INFO - Device disconnected
11/020/2012 20:20:42 - INFO - Device connected with USB debugging off
11/020/2012 20:20:42 - INFO - For 2011 devices line, be sure you are not in MTP mode
after that I receive no more message, and after several minutes I disconnect and reboot my phone.
when the big naa logo appears try hitting the back button to enter recovery mode. then flash your rom and gapps, wipe/fact reset then reboot. that i hope should fix the loop
demoniacs said:
when the big naa logo appears try hitting the back button to enter recovery mode. then flash your rom and gapps, wipe/fact reset then reboot. that i hope should fix the loop
Click to expand...
Click to collapse
I will, but for the moment it loop but it probably not reboot in loop, since I seen the logo once. And now it's only the screen animation that run 2 seconds, stop, black screen, and loop on screen animation with different colors
rafal98 said:
I will, but for the moment it loop but it probably not reboot in loop, since I seen the logo once. And now it's only the screen animation that run 2 seconds, stop, black screen, and loop on screen animation with different colors
Click to expand...
Click to collapse
Re-flash to stock.
Make sure you garbed the correct downloads.. re-read instructions.
unlocked bootloader? While in bootloop zone,press and hold power button + middle button.phone should reboot, and u can go to recovery and install ROM
Again, how to reflash in the current situation ?
The good news is that flashtool detect the phone, but I can't reflash because I can't shutdown the phone ...
Do first things what i say, if that not work, u should reflash to stock rom with SEUS, with repair mode.
I miss your first post. In fact I wait all the night that battery become empty, and run flashtool, push foward and plug. I probably wait 5' that the phone has enought energy, then flashtool detect the phone and flash it with the stock kernel.
And it's works !!!!
note: the colored screen animation that was looping, was in fact the Sony Ericson logo presentation during the boot
Recover X10i
XTacDK said:
unlocked bootloader? While in bootloop zone,press and hold power button + middle button.phone should reboot, and u can go to recovery and install ROM
Click to expand...
Click to collapse
Thanks. This has worked to reinstall a ROM on my SE Xperia X10 Mini
Hey there,
I have a similar problem here, but I can't solve It.
Did a Hard Reset by pressing the Power key and Home Key. I also tried to click the Reset button under the phone cover near the IMEI codetag thing.
I have tried to use the X10FlashTool, SEUS (it only says that i have the newest software already)
When I try to start the phone all i can see is a black screen and nothing else.
Any more solutions i can try?
rafal98 said:
Hi,
My X10 mini (E10i) was rooted some months ago.
I decide to install miniCM7.2, so I succesfully unlock the bootloader, then kernel flashing appears to be ok, but when I reboot it, it show a new big logo, and after a while, a kind of animated background was visible. But it loop indefinitely on this animation, freeze, screen become blank, then reloop ...
I can't reboot it, I can't remove the batterie (it's hidden into the device)
Help !
Here the logs:
11/018/2012 20:18:58 - INFO - <- This level is successfully initialized
11/018/2012 20:18:58 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
11/018/2012 20:18:58 - INFO - You can drag and drop ftf files here to start flashing them
11/019/2012 20:19:03 - INFO - Device disconnected
11/019/2012 20:19:24 - INFO - Selected E10_nAa-11_2.6.29.6-nAa-11.ftf
11/019/2012 20:19:24 - INFO - Preparing files for flashing
11/019/2012 20:19:24 - INFO - Please connect your device into flashmode.
11/020/2012 20:20:12 - INFO - Device connected in flash mode
11/020/2012 20:20:12 - INFO - Opening device for R/W
11/020/2012 20:20:13 - INFO - Reading device information
11/020/2012 20:20:13 - INFO - Phone reading for flashing.
11/020/2012 20:20:13 - INFO - Start Flashing
11/020/2012 20:20:13 - INFO - Flashing loader
11/020/2012 20:20:14 - INFO - Loader version : r4A060 / Bootloader status : ROOTED
11/020/2012 20:20:14 - INFO - Flashing kernel.sin
11/020/2012 20:20:16 - INFO - Flashing finished.
11/020/2012 20:20:16 - INFO - Please wait. Phone will reboot
11/020/2012 20:20:16 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
11/020/2012 20:20:16 - INFO - Device connected in flash mode
11/020/2012 20:20:18 - INFO - Device disconnected
11/020/2012 20:20:20 - INFO - Device connected in flash mode
11/020/2012 20:20:34 - INFO - Device disconnected
11/020/2012 20:20:42 - INFO - Device connected with USB debugging off
11/020/2012 20:20:42 - INFO - For 2011 devices line, be sure you are not in MTP mode
after that I receive no more message, and after several minutes I disconnect and reboot my phone.
Click to expand...
Click to collapse
i have same problem after try to flash naa kernel
same message, not my device but my gf device (x10 mini pro)
and flash over sony companion over internet
take a time but it works
the device back to stock rom, i try to flash to custom rom, but every custom rom need naa kernel
and i tried twice to flash it and failed like your message
anyone can solve my problem?
now using cyanocream sandwich (cant connect to 3g and no radio)
After flashing with nAa v11 .....My x10 mini got hard bricked.......Just a RED led appears with blank screen.....Any help guys????
Pradee265254 said:
After flashing with nAa v11 .....My x10 mini got hard bricked.......Just a RED led appears with blank screen.....Any help guys????
Click to expand...
Click to collapse
flash it with SEUS over internet
it will make your device back to stock rom
No phone connected to the computer
Try whith SE PC Suite
- Support Zone
- Start the update of the phones software
- There will be a pop up stating the phone was not found, on this pop up there is a link to "repair the phone" click it and then connect your phone in flash mode.
See screenshot.
Do a factory reset
Sent from my E10i using XDA
Hi all!
I think this is the right place to post this (please correct me if i'm wrong)..
Today I received my xperia s and was super happy!! Made a call to my service provider to activate my sim. All good. I then connected the phone to my computer and installed PC Companion as there was a notification to update. PC Companion confirmed this and I went ahead with the download. After download was complete the program began installing the software and about 1/4 of the way in it stopped for about 15min and then gave me an error saying it was not able to finish installation I should try again or contact support. I then installed SEUS and the same thing happened. I then did some more research and downloaded both the GB and ICS generic .ftf files, installed flash tool 0.8.6 and tried to flash. For the ICS update I got the same spot as SEUS and PC Companion did before it froze.
10/042/2012 19:42:09 - INFO - <- This level is successfully initialized
10/042/2012 19:42:09 - INFO - Flashtool Version 0.8.6.0 built on 2012-06-13 08:08:54
10/042/2012 19:42:09 - INFO - You can drag and drop ftf files here to start flashing them
10/042/2012 19:42:14 - INFO - Device disconnected
10/042/2012 19:42:19 - INFO - Selected LT26_6.1.A.0.452_Generic_CH_1257-3740_ (1).ftf
10/042/2012 19:42:19 - INFO - Preparing files for flashing
10/043/2012 19:43:03 - INFO - Please connect your device into flashmode.
10/043/2012 19:43:20 - INFO - Device connected in flash mode
10/043/2012 19:43:20 - INFO - Opening device for R/W
10/043/2012 19:43:20 - INFO - Device connected in flash mode
10/043/2012 19:43:20 - INFO - Reading device information
10/043/2012 19:43:20 - INFO - Phone ready for flashmode operations.
10/043/2012 19:43:20 - INFO - Start Flashing
10/043/2012 19:43:20 - INFO - Flashing loader
10/043/2012 19:43:22 - INFO - Loader : S1_Root_de72 - Version : R5C004 / Bootloader status : ROOTABLE
10/043/2012 19:43:22 - INFO - Flashing partition-image.sin
10/043/2012 19:43:26 - INFO - Flashing kernel.sin
10/043/2012 19:43:30 - INFO - Flashing fotakernel.sin
10/043/2012 19:43:34 - INFO - Flashing amss_fs_2.sin
10/043/2012 19:43:37 - INFO - Flashing amss_fs_1.sin
10/043/2012 19:43:39 - INFO - Flashing amss_fsg.sin
10/043/2012 19:43:40 - INFO - Flashing apps_log.sin
10/043/2012 19:43:43 - INFO - Flashing system.sin
Stuck here. at 24%.
I should say the first time this happened my phone was essentially bricked in that only the boot screen showed.
After trying to flash back to GB the process completed however the phone would turn on to the boot screen for about 10 seconds then restart, repeat.
I don't know if I was meant to change a setting in the phone to allow this process to happen or not but I don't have access to the phone so can't do much about that now....does anyone have any idea as to how to proceed?
My SI Number is 1257-6322 if that helps. I used firmwares:
LT26_6.1.A.0.452_Generic_CH_1257-3740_ (1) for ICS &
LT26i_6.0.A.3.75_Generic NL for GB.
red.leader87 said:
Hi all!
I think this is the right place to post this (please correct me if i'm wrong)..
Today I received my xperia s and was super happy!! Made a call to my service provider to activate my sim. All good. I then connected the phone to my computer and installed PC Companion as there was a notification to update. PC Companion confirmed this and I went ahead with the download. After download was complete the program began installing the software and about 1/4 of the way in it stopped for about 15min and then gave me an error saying it was not able to finish installation I should try again or contact support. I then installed SEUS and the same thing happened. I then did some more research and downloaded both the GB and ICS generic .ftf files, installed flash tool 0.8.6 and tried to flash. For the ICS update I got the same spot as SEUS and PC Companion did before it froze.
10/042/2012 19:42:09 - INFO - <- This level is successfully initialized
10/042/2012 19:42:09 - INFO - Flashtool Version 0.8.6.0 built on 2012-06-13 08:08:54
10/042/2012 19:42:09 - INFO - You can drag and drop ftf files here to start flashing them
10/042/2012 19:42:14 - INFO - Device disconnected
10/042/2012 19:42:19 - INFO - Selected LT26_6.1.A.0.452_Generic_CH_1257-3740_ (1).ftf
10/042/2012 19:42:19 - INFO - Preparing files for flashing
10/043/2012 19:43:03 - INFO - Please connect your device into flashmode.
10/043/2012 19:43:20 - INFO - Device connected in flash mode
10/043/2012 19:43:20 - INFO - Opening device for R/W
10/043/2012 19:43:20 - INFO - Device connected in flash mode
10/043/2012 19:43:20 - INFO - Reading device information
10/043/2012 19:43:20 - INFO - Phone ready for flashmode operations.
10/043/2012 19:43:20 - INFO - Start Flashing
10/043/2012 19:43:20 - INFO - Flashing loader
10/043/2012 19:43:22 - INFO - Loader : S1_Root_de72 - Version : R5C004 / Bootloader status : ROOTABLE
10/043/2012 19:43:22 - INFO - Flashing partition-image.sin
10/043/2012 19:43:26 - INFO - Flashing kernel.sin
10/043/2012 19:43:30 - INFO - Flashing fotakernel.sin
10/043/2012 19:43:34 - INFO - Flashing amss_fs_2.sin
10/043/2012 19:43:37 - INFO - Flashing amss_fs_1.sin
10/043/2012 19:43:39 - INFO - Flashing amss_fsg.sin
10/043/2012 19:43:40 - INFO - Flashing apps_log.sin
10/043/2012 19:43:43 - INFO - Flashing system.sin
Stuck here. at 24%.
I should say the first time this happened my phone was essentially bricked in that only the boot screen showed.
After trying to flash back to GB the process completed however the phone would turn on to the boot screen for about 10 seconds then restart, repeat.
I don't know if I was meant to change a setting in the phone to allow this process to happen or not but I don't have access to the phone so can't do much about that now....does anyone have any idea as to how to proceed?
My SI Number is 1257-6322 if that helps. I used firmwares:
LT26_6.1.A.0.452_Generic_CH_1257-3740_ (1) for ICS &
LT26i_6.0.A.3.75_Generic NL for GB.
Click to expand...
Click to collapse
Unplug your phone and try to press the power button and the volup button at the same time for a long period (until you get 3 short vibrations)
it will completely shutdown your phone
first you can try to plug it to a power supply and check if it charges or not. For flashing I advise you the phone to be charged at least 80%
once done, unplug the phone and press voldown button while plugging to computer. It should go to flashmode and you would be able to retry flashing.
Try on another computer if possible. Maybe your usb port is not enough self powered ... try with another cable if you can. I had once an issue with my cable where my phone didn't stop to show as plugged / unplugged / plugged / unplugged
Let us know
Androxyde said:
Unplug your phone and try to press the power button and the volup button at the same time for a long period (until you get 3 short vibrations)
it will completely shutdown your phone
first you can try to plug it to a power supply and check if it charges or not. For flashing I advise you the phone to be charged at least 80%
once done, unplug the phone and press voldown button while plugging to computer. It should go to flashmode and you would be able to retry flashing.
Try on another computer if possible. Maybe your usb port is not enough self powered ... try with another cable if you can. I had once an issue with my cable where my phone didn't stop to show as plugged / unplugged / plugged / unplugged
Let us know
Click to expand...
Click to collapse
Thanks for your suggestions and response, Androxyde.
I hard reset my phone every time (one vibration followed by three vibrations). If I don't (since the error first arose) then the phone will be constantly restarting on the "Sony" loadscreen...though sometimes it has got to the Xperia loadscreen after which it will freeze and restarts again.
I made sure I had over 90% battery power when I first flashed. USB ports have plenty of power. Now as the phone doesn't turn on I have been charging via power adapter to get a graphical indication of power level (not over 9000!!).
I'm beginning to think I have bricked the phone and am considering calling up my provider and telling them so. It looks like an isolated case, though I did read a post by someone who had the same issue but there was no solution as such. There is also a Sony service centre in my city (melbourne). I will try a couple more firmwares both GB and ICS and see how it goes...any other suggestions are welcome!!
Phone bricked after unlock and install of doomkernel
I have a similar (the same?) issue:
Unlocked the Xperia S
Used fastboot to flash doomkernel
Turned the phone on
Nothing happened. I've tried flashing several different stock ftfs using flashtool 0.8.6 and every single time I get the message:
ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0019";ERR_DYNAMIC="SIN header verification failed";
I've tried flashing only kernel.sin using fastboot and everything looks OK:
sending 'boot' (5576 KB)...
(bootloader) USB download speed was 18601kB/s
OKAY [ 0.321s]
writing 'boot'...
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x0000d000-0x00014fff
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 0.347s]
finished. total time: 0.669s
But again, the screen remains black and nothing happens. The phone had a full battery when I started and if I "turn it on" and plug the charger the red light turns on.
Any ideas as to how to bring it back to life?
g2010a said:
I have a similar (the same?) issue:
Unlocked the Xperia S
Used fastboot to flash doomkernel
Turned the phone on
Nothing happened. I've tried flashing several different stock ftfs using flashtool 0.8.6 and every single time I get the message:
ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0019";ERR_DYNAMIC="SIN header verification failed";
I've tried flashing only kernel.sin using fastboot and everything looks OK:
sending 'boot' (5576 KB)...
(bootloader) USB download speed was 18601kB/s
OKAY [ 0.321s]
writing 'boot'...
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x0000d000-0x00014fff
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 0.347s]
finished. total time: 0.669s
But again, the screen remains black and nothing happens. The phone had a full battery when I started and if I "turn it on" and plug the charger the red light turns on.
Any ideas as to how to bring it back to life?
Click to expand...
Click to collapse
If you still able to use fastboot than try to flash a prerooted image file( gb or ics I don't know what firmware you was on) and the kernel.elf
Sent from my LT26i using Tapatalk 2
gm007 said:
If you still able to use fastboot than try to flash a prerooted image file( gb or ics I don't know what firmware you was on) and the kernel.elf
Click to expand...
Click to collapse
I tried flashing Swedish rooted img (6.0.A.3.75) -- I originally had the German version. It flashed just fine using flashtool but it still won't turn on
I then flashed S-Advanced-Stock-v01_kernel.elf to no avail. I have a sinking feeling.
In the end I returned the phone under my carrier's DOA/ELF policy. I found out 24hrs after I sent the phone back (interstate) that it was irreparable!..and received my new one yesterday. Successfully flashed to .42 today and am super happy with the device!!
As to the original issue I suspect the cause could be;
- Hardware failure. If so almost 100% sure it's not my computer. Phone memory corrupt or battery issue would be my first guess.
- Downloaded software (update) corrupted, initial installation of GB corrupted.
So at least you know you didn't brick it... Btw, it happened to me too when I wanted to upgrade to ICS. It did a really short bootloop and got stuck. Eventually I got it to work and flash. I somehow made it go to green led bootloop. It would turn on and go to flash mode and turn off again. I had to find the right miment to throw the ftf file on it.
Sent from my LT26i using xda app-developers app
Hai i am new on XDA plz help me to solve my problem
i bricked my SE Live With Walkman WT9i by flashing a wrong kernel. Now it is stuck on Sony Erricson boot logo.. Now what will i do re solve it..
Have you tried going into fastboot mode to flash correct kernel?
Sent from my SK17a using xda app-developers app
did you unlock your boot loader before flashing custom rom?
man..its easy dont panic it happend to me lots of times just flash a .ftf stock rom via flashtool
will 100% work
unforgiven1311 said:
Have you tried going into fastboot mode to flash correct kernel?
Click to expand...
Click to collapse
I tried fastboot using FlashTool but responce is this..
" Device connected in fastboot mode
28/040/2012 06:40:02 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
28/040/2012 06:40:03 - INFO - Device Status: FASTBOOT mode
28/040/2012 06:40:07 - INFO - Selected kernel (boot.img or kernel.sin): C:\Flashtool\boot_lite_coconut_v3.img
28/040/2012 06:40:07 - INFO - Flashing selected kernel
28/040/2012 06:40:07 - INFO - sending 'boot' (7566 KB)...
28/040/2012 06:40:07 - INFO - FAILED (remote: The Device must be rooted first)
28/040/2012 06:40:07 - INFO - finished. total time: 0.001s
28/040/2012 06:40:07 - INFO - FASTBOOT Output:
sending 'boot' (7566 KB)...
FAILED (remote: The Device must be rooted first)
finished. total time: 0.001s
28/040/2012 06:40:07 - INFO - Please check the log before rebooting into system
28/040/2012 06:40:12 - INFO - Finished Fastboot Toolbox
"
Sparksys said:
man..its easy dont panic it happend to me lots of times just flash a .ftf stock rom via flashtool
will 100% work
Click to expand...
Click to collapse
I tried it but it stuck in this attachment section..
nothing is happnd after that.. plz help..
I tried flash mode with flash tool but this time ter is an error..
28/007/2012 07:07:16 - INFO - <- This level is successfully initialized
28/007/2012 07:07:17 - INFO - Flashtool Version 0.9.0.0 built on 2012-07-19 22:57:15
28/007/2012 07:07:17 - INFO - You can drag and drop ftf files here to start flashing them
28/007/2012 07:07:22 - INFO - Device connected in flash mode
28/007/2012 07:07:44 - INFO - Selected WT19i_4.1.B.0.431_Generic.ftf
28/007/2012 07:07:44 - INFO - Preparing files for flashing
28/007/2012 07:07:49 - INFO - Please connect your device into flashmode.
28/007/2012 07:07:52 - INFO - Opening device for R/W
28/007/2012 07:07:52 - INFO - Start Flashing
28/007/2012 07:07:52 - INFO - Flashing loader
28/007/2012 07:07:52 - INFO - Ending flash session
28/007/2012 07:07:52 - ERROR -
28/007/2012 07:07:52 - ERROR - Error flashing. Aborted
28/007/2012 07:07:52 - INFO - Device connected in flash mode
Hooooo at last its sucessfull...
i retried with FlashTool in flash boot mode(press volume downkey then plug usb)..
then its starts flashing... hoo thank god..
Thak u guys for ur help...:laugh::laugh::laugh::victory::victory::victory:
Arshadkm said:
Hooooo at last its sucessfull...
i retried with FlashTool in flash boot mode(press volume downkey then plug usb)..
then its starts flashing... hoo thank god..
Thak u guys for ur help...:laugh::laugh::laugh::victory::victory::victory:
Click to expand...
Click to collapse
frist time im rooting my phone same thing happen to me. just flash stock kernal,
Buddy whats ur phone model.. If itz LWW I will try... Dnt wry..
Sent from my WT19i using xda app-developers app
Go to Mode FastBoot.
Arshadkm said:
Hai i am new on XDA plz help me to solve my problem
i bricked my SE Live With Walkman WT9i by flashing a wrong kernel. Now it is stuck on Sony Erricson boot logo.. Now what will i do re solve it..
Click to expand...
Click to collapse
I have two links that can help you.
First Lock at. http://forum.xda-developers.com/showthread.php?t=1672110
Next This. http://forum.xda-developers.com/showthread.php?p=29406690#post29406690
I hope I have helped
help guys... my xperia P always reeboting... how can i resolve this pls pls pls... help me... i accedintally deleted the framework-res.apk and framework.jar please anyone......
allenpot said:
help guys... my xperia P always reeboting... how can i resolve this pls pls pls... help me... i accedintally deleted the framework-res.apk and framework.jar please anyone......
Click to expand...
Click to collapse
Do you meen it boot loops?
If you have the formware ftf you can flash just system (no wipes, exclude all others).
ChikeD said:
Do you meen it boot loops?
If you have the formware ftf you can flash just system (no wipes, exclude all others).
Click to expand...
Click to collapse
yes bootloop. i have .ftf file.. but how? flashtool always stucked up here..
Preparing files for flashing
17/046/2013 22:46:03 - INFO - Please connect your device into flashmode.
17/051/2013 22:51:13 - INFO - Device connected with USB debugging on
17/051/2013 22:51:13 - INFO - Connected device : Sony Xperia P
17/051/2013 22:51:13 - INFO - Installed version of busybox : BusyBox v1.20.2-Stericson (2012-07-04 21:33:31 CDT) multi-call binary.
17/051/2013 22:51:13 - INFO - Android version : 4.1.2 / kernel version : 3.0.8+ / Build number : 6.2.A.1.100
17/051/2013 22:51:13 - INFO - Checking root access
17/051/2013 22:51:14 - INFO - Root Access Allowed
17/051/2013 22:51:14 - INFO - Installing toolbox to device...
17/051/2013 22:51:14 - INFO - Pushing C:\Flashtool\custom\root\ftkit.tar to /data/local/tmp
17/051/2013 22:51:14 - INFO - Running installftkit as root thru sysrun
allenpot said:
yes bootloop. i have .ftf file.. but how? flashtool always stucked up here..
Preparing files for flashing
17/046/2013 22:46:03 - INFO - Please connect your device into flashmode.
17/051/2013 22:51:13 - INFO - Device connected with USB debugging on
17/051/2013 22:51:13 - INFO - Connected device : Sony Xperia P
17/051/2013 22:51:13 - INFO - Installed version of busybox : BusyBox v1.20.2-Stericson (2012-07-04 21:33:31 CDT) multi-call binary.
17/051/2013 22:51:13 - INFO - Android version : 4.1.2 / kernel version : 3.0.8+ / Build number : 6.2.A.1.100
17/051/2013 22:51:13 - INFO - Checking root access
17/051/2013 22:51:14 - INFO - Root Access Allowed
17/051/2013 22:51:14 - INFO - Installing toolbox to device...
17/051/2013 22:51:14 - INFO - Pushing C:\Flashtool\custom\root\ftkit.tar to /data/local/tmp
17/051/2013 22:51:14 - INFO - Running installftkit as root thru sysrun
Click to expand...
Click to collapse
First you must turn it off, press volume up + power, untill you feel 3 vibrations, you may feel one or two single vibrations before it.
Then connect in flash mode when asked to, (press volume down and connect the USB cable)
ChikeD said:
First you must turn it off, press volume up + power, untill you feel 3 vibrations, you may feel one or two single vibrations before it.
Then connect in flash mode when asked to, (press volume down and connect the USB cable)
Click to expand...
Click to collapse
tried that one...
FLASH mode, is used by FLASHTOOL and can be used on every model of XPERIA phone with a locked or unlocked bootloader. FLASH mode will give a soild GREEN notification led when connected. To connect in FLASH mode:
Start with the phone turned off (or in between loops for some tricks)
Press and HOLD the volume DOWN button. (don't let go )
Now connect to a PC using USB
If all went correctly you will get GREEN led, then let go of button
but i cant get the GREEN led.. just red led
allenpot said:
tried that one...
FLASH mode, is used by FLASHTOOL and can be used on every model of XPERIA phone with a locked or unlocked bootloader. FLASH mode will give a soild GREEN notification led when connected. To connect in FLASH mode:
Start with the phone turned off (or in between loops for some tricks)
Press and HOLD the volume DOWN button. (don't let go )
Now connect to a PC using USB
If all went correctly you will get GREEN led, then let go of button
but i cant get the GREEN led.. just red led
Click to expand...
Click to collapse
The phone completely off, and when you connect in flash mode you get red light?
ChikeD said:
The phone completely off, and when you connect in flash mode you get red light?
Click to expand...
Click to collapse
finally.. flashing finished... i just wait for the battery to totally drain.. and when i try to plug it in flash mode. i got the green light and the flashing process proceeds.. now i'm charging my phone and try to power on after 30mins to see if i'm success.. thank you mate.. thank you.. sorry for my engilsh
allenpot said:
finally.. flashing finished... i just wait for the battery to totally drain.. and when i try to plug it in flash mode. i got the green light and the flashing process proceeds.. now i'm charging my phone and try to power on after 30mins to see if i'm success.. thank you mate.. thank you.. sorry for my engilsh
Click to expand...
Click to collapse
You should be fine but you will need to re-root if it's not a cusom kernel.
Hi. My D6503 device shuted down suddenly and try to open you see writing up SONY down XPERIA on screen and does not go forward. i did this things:
1) i did hard reset. (volume down+power and volume up+power and push the red button until 3 times vibration)
2)i installed pc companion and used.
3) i used flashtool to flash orginal firmware to device but when it is flushing there is writing "reading device information" and does not go forward.
i think that every thing, every details is right that i did about this 3 solution. but it is not fixed.
i am not sure my device usb debuggin is enabled and is unlocked bootloader. i could not learn that because device does not open.
i have no idea how can fix that. i read a lot of things about that but i could not find. can you help me please? thanks
Please post log in flashtool when your plug in your device to pc
Sent from my D2105 using Tapatalk
14/006/2016 16:06:39 - INFO - Flashtool Version 0.9.19.8 built on 24-09-2015 22:00:00
14/006/2016 16:06:39 - INFO - Executing search strategies to find proxy selector
14/006/2016 16:06:40 - INFO - No proxy found for IE. Trying next one
14/006/2016 16:06:40 - INFO - Strategy firefox failed trying next one : No Firefox installation found
14/006/2016 16:06:40 - INFO - No proxy found for java. Trying next one
14/006/2016 16:06:40 - INFO - Syncing devices from github
14/006/2016 16:06:40 - INFO - Scanning devices folder for changes.
14/006/2016 16:06:49 - INFO - Pulling changes from github.
14/006/2016 16:06:49 - INFO - Devices sync finished.
14/006/2016 16:06:54 - INFO - Device disconnected
14/007/2016 16:07:10 - INFO - Selected Bundle for Sony Xperia Z2 (D6503). FW release : 23.4.A.1.232_R5C. Customization : Central Europe 3 Generic_1281-8385
14/007/2016 16:07:10 - INFO - Preparing files for flashing
14/010/2016 16:10:27 - INFO - Please connect your device into flashmode.
14/011/2016 16:11:01 - INFO - Device connected in flash mode
14/011/2016 16:11:02 - INFO - Device connected in flash mode
14/011/2016 16:11:02 - INFO - Opening device for R/W
14/011/2016 16:11:02 - INFO - Reading device information
Did you use original cable from sony ?
Or maybe you have a bad cable ..
Or try to flash preroot frimware via twrp recovery then do factory reset
Sent from my D2105 using Tapatalk
i waited for 1-2 hours after the writing "reading device information" but nothings happen.
i also installed the Emma but when i try to connect Emma (turned of +volume down+usb plug in) i can not connect, nothings happen.
i installed drivers into drivers folder after flashtool was installed and when i attach the device (turn off, volume down) with usb to computer it was defined "SOMC Flash Device" below the device manager.
i used original cable but after your post i tried another cable unfortunately does not work. i searched how can i flash pre rooted firmware , i realized that you have to install twrp. but i can not find how is it install with flashtool. could you help me how can i install twrp with flashtool?
mgurer said:
i used original cable but after your post i tried another cable unfortunately does not work. i searched how can i flash pre rooted firmware , i realized that you have to install twrp. but i can not find how is it install with flashtool. could you help me how can i install twrp with flashtool?
Click to expand...
Click to collapse
Download latest androplus kernel, unpack the boot.img, then just flash the boot.img though flashtool via fastboot mode, to boot to recovery, turn on your device and when the led turn on, pres volume down and that's your twrp ..
Sent from my D2105 using Tapatalk
i downloaded last version Z2_AndroPlusKernel_v57a and flashed but it is failed. (remote: command not allowed) you can see log.
14/038/2016 20:38:14 - INFO - Device disconnected
14/038/2016 20:38:28 - INFO - Device connected in fastboot mode
14/038/2016 20:38:47 - INFO - Now plug your device in Fastboot Mode
14/039/2016 20:39:04 - INFO - Selected kernel (boot.img or kernel.sin): C:\Users\muratgurer\Desktop\boot.img
14/039/2016 20:39:04 - INFO - Flashing selected kernel
14/039/2016 20:39:05 - INFO - sending 'boot' (16342 KB)...
14/039/2016 20:39:05 - INFO - OKAY [ 0.636s]
14/039/2016 20:39:05 - INFO - writing 'boot'...
14/039/2016 20:39:05 - INFO - FAILED (remote: Command not allowed)
14/039/2016 20:39:05 - INFO - finished. total time: 0.638s
14/039/2016 20:39:05 - INFO - FASTBOOT Output:
sending 'boot' (16342 KB)...
OKAY [ 0.636s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.638s
14/039/2016 20:39:05 - INFO - Please check the log before rebooting into system
The lastest androplus kernel is v71, but that's okay .. Maybe that's error caused by your computer have two fastboot binary, one in flashtool, and one in other tool (example in minimal adb fastboot tool), if your machine have more than one fastboot, you can't use the fastboot to flash anything
Sent from my D2105 using Tapatalk
i used another pc today and i just installed only flashtool not another program and i installed drivers into flashtool. i did eveything from the beginning and the same result i have. also flushing kernel. i guess usb debugging is disable so i can not do anything.
i can not lock bootloader because of usb debugging is disable. i can not flash the kernel because of bootloader locked.
if usb debugging is disable how can i recover?