TheManii said:
Introduction:
These are the various Gapps packages for android.
As you should know: Gapps cannot be bundled with any source-built rom, they can only be included if you're building off of a stock rom for that device.
These are the various apks used by gapps, and optional apps that cannot be downloaded from the market.
Click to expand...
Click to collapse
How to flash a zip:
Entering recovery mode on device - XDA wiki
Flashing an update.zip with a custom recovery - XDA wiki
Click to expand...
Click to collapse
Requirements:
A custom recovery:
Clockwork Mod 6.0 (or newer)
Team Win Recovery Project 2.2 (or newer)
Click to expand...
Click to collapse
Install instructions:
Download desired zip(s)
Copy update zip to SD card
Reboot into custom recovery mod
Select "update from update.zip"
Navigate to update zip
Flash
Finished
Click to expand...
Click to collapse
Download List:
GB: update-Gapps-GB-21205.zip
GB Optional: update-Gapps-Opt-GB-21205.zip
CarHome
GenieWidget
Talk2
HC: update-Gapps-HC-21216.zip
HC Optional: update-Gapps-Opt-HC-21216.zip
Gmail
GoogleQuickSearchBox
Talk
VoiceSearch
ICS: update-Gapps-ICS-21216.zip
ICS Optional: update-Gapps-Opt-ICS-21216.zip
Facelock
GenieWidget
GoogleQuickSearchBox
Talk
VoiceSearch
JB: update-Gapps-JB-21216.zip
JB Optional: update-Gapps-Opt-JB-21216.zip
Facelock
GenieWidget
Ears
Talk
Velvet
VoiceSearchStub
Click to expand...
Click to collapse
Notice:
You MUST flash the matching Gapps for your android version, flashing the wrong one will lead to unpredictable results
All packages are the newest available to me, they will always be newer then the ones provided on goo.im
The Optional packages contain apps that are not available on the market, but are otherwise not required for Gapps functionality
Click to expand...
Click to collapse
Changelog:
Dec 16 2012: Fixed permission files in JB, moved GoogleQuickSearchBox/Velvet to Opt packages
Dec 11 2012: Added Gmail to HC Opt package
Dec 5 2012: Updated all packages
Jul 21 2012: Updated instructions
Jul 12 2012: Split packages into required and optional, added Carhome/GB, GenieWidget/GB, Talk/GB, removed GalleryGoogle/ICS
Jul 10 2012: Initial release of ICS version, GB updated to market 3.7.13
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Reposted from Streak 7 forum, if you wish to leave comments, press the ">" in the header bar of the quote box
This space for rent
Gapps all versions
Gapps all other versions: http://goo.im/gapps/
Like I said in the OP, those versions are all much older, CMwiki links to goo.im
Is there anyway we can get ICS gmail on GB?
Very useful !!!
ncik said:
Is there anyway we can get ICS gmail on GB?
Click to expand...
Click to collapse
If you mean the ICS specific UI stuff and features, unlikely unless someone backports it.
Regardless I dont include gmail anyway in the package
I will be releasing an update soon
prelim changelog:
Talk2 for GB (2.3.7)
Geniewidget, talk, carhome will be moved into optional zips
So both version will have 2 zips each:
Core Gapps, required to make gapps work
Optional apps, apps that arnt on the market, but arnt required for anything
Updated Gapps/ICS and Gapps/GB to 20712
If you had previously installed ICS 20710, you do not need to reinstall as it includes no new changes for you.
Zips have been split in two:
Core Gapps
Optional apks not found on market
GoogleGallery has been removed from Gapps/ICS, the stock gallery currently has some minor issues, but should still work.
Starting from a clean install of the AOSP ICS ROM, I (repeatedly) tried to install the optional Gapps version "update-Gapps-ICS-Opt-20712.zip", but to no avail.
I gave up and tried the basic version "update-Gapps-ICS-20712.zip", which installed without a hitch.
Cant download anything from your servers for some reason... can you upload the basic version to another mirror please?
Gapps will be updated to 4.0.4-39021 soon.
I will no longer be supporting streakmod installs and it will not be compatable with it.
I will also be merging in support for the S7/S10.
TheManii said:
Gapps will be updated to 4.0.4-39021 soon.
I will no longer be supporting streakmod installs and it will not be compatable with it.
I will also be merging in support for the S7/S10.
Click to expand...
Click to collapse
Bad decision considering the new version is buggy compared to streakmod, anyway it is your decision.
Have fun with it.
The current one is still much newer then the 'official' one.
I simply dont use streakmod anymore, so I'm not even testing if it breaks installs.
All my future update zips will be unified zips, they'll work on any device with a recent CWM.
I'm gonna try and add busybox to streakmod, that would fix 65% of the issues with it
(it wont have dedupe, but that's not a trivial thing to add)
Finally made a new test version very much after the fact:
Notice:
This one is a test version, it is a unified zip for all dell devices.
It REQUIRES CWM 6.0+ or TWRP 2.2+ (for the S7/S10) to install.
It is not compatable with streakmod. (for the S5)
As a bonus, I made it so it includes the permissions file so anyone using that can also use the Dell Stage 1.7 widgets from the market if they wish.
The widgets themselves are not actually bundled, download them off the market if you want, otherwise you dont need to do anything.
update-Gapps-ICS-20907-b1.zip
Contents:
Gapps: 4.0.4-422743
Market: 3.8.17
Supports neon and non-neon devices now (ie S7/S10)
missing text2speech voices from previous versions
Things I'm still missing (ie they're very out of date)
MarketUpdater <from 4.0.4-338691>
OneTimeInitialzer 4.0.4-338691
com.google.widevine.software.drm.jar <from 4.0.4-299849>
If nothing is broken (due to Gapps), I will finish preparing Gapps Opt/ICS.
I've been able to seperate better (I think) the optional files from the required ones.
Updated OP, as I am more or less no longer developing for the S5, the main thread is in the S7 subforum.
Updated all versions of Gapps.
The new zips require CWM to flash (TWRP would work, except that it cant be easily ported to the S5)
IT WILL NOT WORK ON STREAKMOD
If you wish to leave comments, please do so in the original thread and not this one
Updated gapps: moved GoogleQuickSearchBox to Opt package for ICS
If you already had 21205 installed, you do not need to reinstall 21216
Related
This is the installer for the 2ndInit Recovery Mod that's been seen on the XDA community in the last days (http://forum.xda-developers.com/showthread.php?t=1026853). This application automates the process of install/uninstall this 2ndInit Recovery.
DO NOT INSTALL THIS IF ARE YOU ALREADY RUNNING CYANOGENMOD. That ROM already has bootmenu pre-installed, and you'll probably end up having to flash an SBF file to recover your phone.
NOTE: You need ROOT installed on your Defy to use this application.
Download from attachment of this post.
UPDATE: Google as suspended my developer account (in their email they seem to think that this was some kind of malware: http://forum.xda-developers.com/showthread.php?t=1342343 , but they clearly misunderstood the purpose of the app) and all my apps got removed. So, please download from here on XDA.
When you reach the 2ndInit Boot Menu choose "Custom Recovery" to go to ClockworkMod Recovery.
What's this for?
* Makes it possible to load custom ROMs such as CyanogenMod
* Be able to boot into ClockworkMod Recovery without needing to use an app every time to boot to recovery
This app and the 2ndInit itself do not replace the stock bootloader, or the stock recovery, so it's safe to use on a daily basis.
Thanks to ksubedi and the Korean Devs that helped in making this possible, a large amount of credit goes to them. Also big thanks to Skrilax_CZ who was the first to develop the 2ndInit method on Android.
How to update
If you have previously installed this app, to update the BootMenu just install this new one, and press "Install 2ndInit Recovery", you don't need to uninstall first. You'll know that it updated correctly when you boot into BootMenu, notice the version that displays on top.
Changelog
version 2.3 (24-April-2012):
IMPORTANT NOTE : I've made this version with Defy Plus support in mind, I've tested it with 2 different stock Defy Plus and it works very well. I've not tested it with the Defy (MB525) myself but who have report it works just as well. Since many people where having problems with online install I've also made this one install everything offline, if you want the custom URL feature use the previous version instead.
* Using latest bootmenu 1.1.8 (provided by CyanogenDefy sources)
* Using latest CWM Recovery 5.0.3.1 (provided by CyanogenDefy sources)
* Cleaner UI, with colors to indicate status and bottom buttons
* Added ads via admob (since I don't use the Defy myself nowadays, this comes as an incentive for me to keep working in 2ndInit)
version 2.0 (23-November-2011):
* Using latest bootmenu 1.0.7 (provided by CyanogenDefy, special thanks to Epsyson3)
* Using new busybox static binary inside the app. Newer, smaller (which in turn made the APK smaller as well), better. Also comes from cyanogenmod.
* Pop-up layout prompting for install a bit better now, and its strings are now translatable from resources
version 1.9 (6-July-2011):
* Install from custom URL now possible
* Added translation to Russian (contributed by _ReBoot_ )
* Some smaller bugfixes
version 1.8 (1-June-2011):
* Now users are able to choose between bootmenu versions they want to install (so you can select stable 0.6.1 for installing Cyanogen, or latest 0.8.6 for other ROMs, etc)
* By consequence the APK is smaller, since bootmenu versions rest on the web
* Ability to install your own bootmenu from a given URL (for advanced users ONLY!)
* Updated to DEV version bootmenu v. 0.8.6
** fix 2nd-init (support new 2.3.3 kernel)
** add [email protected] (require new 2.3.3 kernel)
** Bugfixes on scripts and CWM3
* Fixed cleanup after install
version 1.7 (15-May-2011):
* Updated to bootmenu v. 0.8.3
** Bugfixes on scripts and CWM3
Some people reported that they were unable to properly flash cyanogen with the last version, I've tested this one, with both Cyanogen and MIUI and it's working ok.
version 1.6 (13-May-2011):
* Added Instructions and Changelog menus
* Updated to use BootMenu v0.8.0
** add overclock. (Menu→System→Overclock)
** bugs fixes
** script fixes
** updated ClockworkMod Recovery to version 3028
version 1.5 didn't release, since 0.8.0 came out the the I was going to do so
version 1.4 (7-May-2011):
* Added About menu
*Updated to use BootMenu v0.6.1
** run-parts /system/bootmenu/init.d/
** add root/unroot
** add uninstall bootmenu
** add USB Mass Storage
** update busybox (v0.19)
** change menu
** fix top menu ↔ bottom menu
** bugfixes
version 1.3 (17-April-2011):
*Updated to use BootMenu v0.5.1
** Bug Fixes
** Few Changes In UI (Background)
** Updated All Scripts, Better Compatibility With Most ROMs
** Changed Directory Structure
* Now checks for USB debug on previous to installing (safe mechanism)
* Now re-verifies if 2ndInit Recovery is installed right after install/uninstall
version 1.2 (14-April-2011):
* Updated to use BootMenu v0.4.5
** Bug Fixes
** Changed Name Of OpenRecovery To Custom Recovery
** ADB Daemon Works Now
** Few Minor Changes...
* Now uninstall is cleaner and more consistent
Note: If you have previously installed this app, to update the BootMenu just install this new one, and press "Install 2ndInit Recovery", you don't need to uninstall first.
Note 2: for people who have installed the previous version, this uninstall just works partially, that is, it removes the bootmenu, but the logwrapper is not restored to the original one. This was the behavior of the previous version uninstall button. Since the new install backups these replaced files, people who have installed only this new version, will have a proper and cleaner uninstall. For those who installed the previous version to restore logwrapper you can restore some old nandroid, or simply flash an SBF file.
version 1.1 : first release on android market, and some improvements
version 1.0 : first release
FAQ
Q: I've flashed a new SBF file and now the blue led doesn't show up anymore.
A: You have to install and app again, and install the mod from the app again, as the flashing of that new ROM replace the BootMenu with it's own.
Q: Does the app have to be always installed?
A: No, you only install this app in order to use the Install button, and then you can uninstall the app, and the 2ndInit will persist. You'll still be able to re-install the app if you want to use the Uninstall button later for some reason.
Q: I can't flash from recovery, I get an sdcard mount error.
A: It seems to be related with phone's who are using version 2.51. To solve, try to flash any recent SBF file. If you want to do a nandroid first, check if SD Recovery works for you.
If you have suggestions or bug reports, or any other questions, please use this thread.
Can i use this tool on stock eclair 2.51 FR rom?
Sent from my MB525 using XDA App
I've not tested on Eclair ROMs, so I can't know for sure, but I don't see any reason why it shouldn't work on Eclair. If you know how to flash .sbf files go ahead and test, you can recover the phone later if it doesn't boot, or just wait for someone with eclair to test and report.
Is it necessary to reboot 2 times?
works very nice thanks!
Works great!
In my tests it worked with just rebooting 1 time, but since the original hack on which this is based upon says to reboot 2 times, I prefer to play safe and tell people to reboot 2 times as well. Notice that you just need to reboot 2 times on the install, isn't that hard to do, since you just do that install 1 time for each ROM you have. Better safe than sorry right?
You're right. In fact, I can enter the menu in the first boot after installing. Another issue, after uninstall the recovery, I find the blue light still up every boot, the menu can still be entered in except saying missing some files. Is there a process of restoring the original "bootmenu, logwrapper, logwrapper.bin"?
Wow those claims seem to be pretty adventurous has anyone been successful in running a custom kernal with this app?
check to creating nandroid backup,
yes it works
thanks
Remove custom kernel bull****, it's not 2nd-init relevant.
Works out of the box.
Thanks.
What version of clockwork mod does this use?
Wow those claims seem to be pretty adventurous has anyone been successful in running a custom kernal with this app?
Click to expand...
Click to collapse
Yes, Quarx is working on CM7 for the Defy, and has already been able to boot it, here: http://forum.xda-developers.com/showpost.php?p=12832992&postcount=74
So, in my point of view, being able to load a custom kernel is relevant.
---
@sunoldman
Yes, the uninstall just removes parts of the menu right now. In the next version I'll backup those files to be able to do a cleaner and proper uninstall. However, the people who have installed this version will not have those backups. There's two solutions, I provide the files (since they don't change that much from ROM to ROM) or they flash an SDB.
What version of clockwork mod does this use?
Click to expand...
Click to collapse
The one that is used by Tenfar and kb7sqi, that is, version 2.5.1.8 .
That kernel in cm7 doesn't seem to be custom, gingerbread uses 2.6.35 kernel, the kernel shown is the one I use on Pays's froyo rom.
Alright, I guess you're right, I'll remove that from the description then.
i want running cyanogenmod or ultimate droid rom
how ????
-juanito- said:
i want running cyanogenmod or ultimate droid rom
how ????
Click to expand...
Click to collapse
You need to wait. There is nothing done yet.
Works great! Keep up the good work!
While testing CM7.1 I found that my google cloud backup was not working.
Restore worked fine, but backup was enabled, but not provisioned.
So I started reproducing that error, created logs and finally found that there is an incompatible version mismatch between several components of the gapps package.
In this special case, the GoogleBackupTransport.apk shows version 2.3 whereas other components show version 2.3.3 and 2.3.4 - a colorful mixture...
Some code from the newer packages is calling a service intent of GoogleBackupTransport which does not exist in version 2.3.
Read the full "story" in CM bug tracker, issue 4353 (I'm not allowed yet to post URLs here)
CM Team told me that they are not responsible for gapps - which I understand and respect.
So where could I report such an issue? Who created those packages?
In my special case, I used a newer GoogleBackupTransport.apk from an older Oxygen ROM, based on 2.3.5 - backup is working fine now, I'm happy.
I also considered creating a gapps package based on the 2.3.7 Versions that can be found in the oxygen-rom repositories, but those are not universal packages with all DPI versions, so I won't do that work if that's not a full replacement for the universal package...
Now, how to proceed getting this fixed? Or who could (and likes to) build a universal gapps package based on 2.3.7. A consistent package might solve other maybe yet undiscovered issues as well.
Edit: I'm talking about gapps-gb-20110828-signed.zip, but older versions are affected, too.
Any luck addressing this? I'm having the same problem.
No, nothing happened. This will be fixed in ICS Gapps, as this is a complete new package.
To workaround this issue, do the following:
Get the GoogleBackupTransport apk in Version 2.3.7. You could extract it from the latest Oxygen ROM, for example (www.oxygen.im), or go to the oxygen github repository if you do not want to download the whole ROM, get it here:
https://github.com/oxygen-rom/android_vendor_google/tree/gingerbread/system/app
Replace the old Version in your ROM, then delete data partition.
You have to run the Setup wizard again to activate the backup system, the only way to do this is a factory reset or a clear data from recovery.
Sent from my HTC Desire using XDA App
GOOGLE APPS PACKAGE FOR CM11 BUILDS
System version
These versions of gapps will be installed on your system partition (/system) just like official gapps packages.
Link to the latest package:-
gapps-kk444-20140724-v2.2.zip (7.9 MB only)
Requirements:-
Need a cm11 build from Jenkins' project: cm-ota which is built after 22/06/2014 (users of older builds are recommended to use gapps-v1.0).
Need a minimium of 12 MB free space in system partiton (Tip for galaxy5 users: 20 MBs of free space is there by default on cm11 builds after 22/07/2014).
Need CWM recovery 6.0.5.2+ by psyke83/Jenkins-cm-recovery (gapps-v1.0 can be installed using any recovery).
How to install? (With a cm11 clean install?)
Reboot to recovery. (Use CWM 6.0.5.2+ by psyke83/Jenkins)
Wipe Data/ Factory Reset.
Go to 'Install zip from sdcard' and select the ROM file (only cm11) you want to install from your sdcard. Let the process complete.
Then, Choose the above given gapps package (only use v2.0 or later for cm11 builds after 22/07/2014) for cm11 in 'install zip from sdcard'.
Then just reboot and you're done!
How to install? (Already installed the cm11 and just want to install gapps now?)
Reboot to recovery (CWM 6.0.5.2+ by psyke83/Jenkins).
Choose the gapps package (only use v2.0 or later for cm11 builds after 22/07/2014) in 'install zip from sdcard' option.
Then just reboot and you're done!
Changelog:-
v2.2
Play-Store updated to latest version: 4.9.13 (released on 23/07/2014).
Fixed updater script to install on all other devices.
v2.0 (Removed link because this version worked only on Galaxy 5)
Updated updater-script to make installation compatible with new CWM 6.0.5.2+ (with swapped partitions).
Updated Play Store to latest version (v4.8.20).
Continued using JB (cm10.1) Google Framework and Login Services as latest KK (cm11) Google Framework and Login Services exceed the free size of system partition even if slimmed to it's end.
v1.1
Fixed: Now it can be flashed using cwm 6.0.4.6 by psyke83
v1.0
Can be installed using CWM 6.0.1.2 (Trying to make it capable of flash via CWM 6.0.4.5+)
Play store, Google account and everything working.
Removed big apps like talk, youtube, etc.
Updated Play Store to latest version.
NOTE: These gapps are the minimalistic gapps possible.
SD-EXT version
This version will be installed on your sd-ext partition. (So these packages won t occupy space in system partition. This will help devices with tiny system partition.)
Link to the latest package:-
gapps-kk442-20140225-sdext-v2.0.zip (20.5 MB only)
Patch for Mountscript :-
gapps-kk442-sdext-patch.zip (128 KB only)
This patch creates a mount script for your sd-ext partition. And if your using any app2sd apps like link2sd then also please INSTALL this patch. It won't conflict with link2sd (or other app2sd apps), Don't worry.
Patch for Dalvik-cache Duplication:-
dalvik-cache-patch.zip(128 KB only)
This patch is optional and will save you 5 MBs in data partition because it removes (symlinks infact) duplicated dalvik-cache files.
Requirements:-
Need a cm11 build from Jenkins' project: cm-ota which is built after 22/06/2014.
An sd-ext partition of any size having atleast 31 MB free space for v2.0 and 11 MB free space for v1.0.
Any working recovery (Recommended: CWM recovery 6.0.5.2+ by psyke83/Jenkins-cm-recovery).
How to install?
Download gapps package, mountscript patch and dalvik-cache patch from above link.
Install mountscript patch & dalvik-cache patch.
Then install gapps package. (Install simply without any wipes). IF you are using my v1.0 sdext gapps, for upgrading to v2.0 do a full data wipe and again flash cm11.
Reboot to system and you're done!
Changelog:-
v2.0
Made from fresh official cm-11.0 gapps.
Added GmsCore.apk because without it, new cm11 gapps don't allow you to add a Google Account.
GoogleContactSyncAdapter and GoogleCalendarSyncAdapter are now moved to /system/app because they must be there (not needed to put in priv-app).
Added few necessary permission files (to /system/etc/permissions) to run Google Maps and few other things.
Added framework jars for maps, drm and media-effects.
Added system/addon.d/70-gapps.sh
Added GoogleOneTimeInitializer.apk (not OneTimeInitializer.apk)
Added ConfigUpdater.apk
v1.0 (only 6.5 MB)
Can be flashed on sd-ext partition.
NOTE: These gapps (all versions) are incompatible with ART.
Credits:-
psyke83 : for his cm10.1 gapps package and for help with mountscript and dalvik-cache patch's script.
Feby : for help of mountscript.
Me : for maintaining these gapps packages.
Problem while installing these gapps
Hi,
I'm having a big problem about getting these gapps to work. Indeed, even if they are installed perfecly through the recovery (CWM/ PhilZ Touch), when my callisto reboots there no google apps (e.g Play Sore) installed. I tried to add my google account through the settings but didn't helped, still nothing. I'm using CM11 made by psyke83 : http://forum.xda-developers.com/showthread.php?t=2453085
Any idea to get play store working ?
mehdoux said:
Hi,
I'm having a big problem about getting these gapps to work. Indeed, even if they are installed perfecly through the recovery (CWM/ PhilZ Touch), when my callisto reboots there no google apps (e.g Play Sore) installed. I tried to add my google account through the settings but didn't helped, still nothing. I'm using CM11 made by psyke83 : http://forum.xda-developers.com/showthread.php?t=2453085
Any idea to get play store working ?
Click to expand...
Click to collapse
Please read instructions. Free up enough space in system partition first. And if you're using sd-ext gapps, make sure it has free space and even it exist and you flashed mountscript patch.
READ INSTRUCTION CAREFULLY AND GET THE JOB DONE.
Bhargav97 said:
Please read instructions. Free up enough space in system partition first. And if you're using sd-ext gapps, make sure it has free space and even it exist and you flashed mountscript patch.
READ INSTRUCTION CAREFULLY AND GET THE JOB DONE.
Click to expand...
Click to collapse
Hi,
THIS IS EXACTLY WHAT I DID. I deleted all the files you mentionned (some files won't get deleted though).The recovery wasn't giving any error. Anyway, I deleted some others system apps (which I will replace with some third-party apps, it was the only solution because i didn't want to use sd-ext gapps) and finally get the play store installed. Thank you for your help and keep up the good work.
one question: what this gapps-kk442-sdext-patch script is better link2sd?
iSanechek said:
one question: what this gapps-kk442-sdext-patch script is better link2sd?
Click to expand...
Click to collapse
If you have that then you can't use link2sd because the gapps will be installed on the sd-ext partition. So, if you install link2sd it will override the gapps.
Sent from my GT-I5500 using Tapatalk
Vagelis1608 said:
If you have that then you can't use link2sd because the gapps will be installed on the sd-ext partition. So, if you install link2sd it will override the gapps.
Sent from my GT-I5500 using Tapatalk
Click to expand...
Click to collapse
Don't give wrong advice please. He can use Link2SD without any problems even if he's using that patch and gapps, already written on first post. gapps will just occupy a little space on sd-ext partition and that's it.
iSanechek said:
one question: what this gapps-kk442-sdext-patch script is better link2sd?
Click to expand...
Click to collapse
I'm not sure what you are asking. I've already written on first post that installing this patch and gapps won't create any problems with Link2SD. And, if you have link2sd then also you must install that patch because of a different (non-standard) mount-point creation by Link2SD.
Bhargav97 said:
I'm not sure what you are asking. I've already written on first post that installing this patch and gapps won't create any problems with Link2SD. And, if you have link2sd then also you must install that patch because of a different (non-standard) mount-point creation by Link2SD.
Click to expand...
Click to collapse
I asked what the plus of this script? if I use link2sd. thanks for reply and help. I understood everything.
Help Google now not working!!
HI
Thanks for providing the SD ext version of gapps but i have a major problem as Google now doesn't work. The app will be installed and start normally but when i tap the mic to start speaking it say "Unfortunately Google Search has stopped working" .
Thanks in advanced (a lot).
DETAILS:
Galaxy 5 running on cm11 20140531 NIGHTLY
SDEXT:- 512 mb
Swap:- 64mb
processor oc to 768Mhz
SDEXT gapps (provided by you):laugh:
abhijeet98 said:
HI
Thanks for providing the SD ext version of gapps but i have a major problem as Google now doesn't work. The app will be installed and start normally but when i tap the mic to start speaking it say "Unfortunately Google Search has stopped working" .
Thanks in advanced (a lot).
DETAILS:
Galaxy 5 running on cm11 20140531 NIGHTLY
SDEXT:- 512 mb
Swap:- 64mb
processor oc to 768Mhz
SDEXT gapps (provided by you):laugh:
Click to expand...
Click to collapse
The Google Now's Voice Search is not compatible with armv6 devices (like: galaxy5). Because the libs needed for them are compiled for armv7. So it's not fault of my gapps, it's where the limitation of your device arrives.
However, there's a workaround for that (it's not too pretty but it works):
http://forum.xda-developers.com/showthread.php?t=2709285
Not related to gapps but only one Question!
I wanted to ask that whether I can install cm11 Nightlies to SDEXT like "psyke" sir developed the rom for my device(GT15503) that can be installed
in the SDEXT ? As the further development has stopped of that Rom so i thought it would be great if Jenkins build could be installed on SDEXT :laugh:.If possible please give me a solution.
Thnx man this works perfectly with The CM11 for Galaxy 551 and had no problem with it whatsoever. I have to applaud you
and say good work on this.
thanks :good:
MADjohny24 said:
thanks :good:
Click to expand...
Click to collapse
Seems like you are new to XDA.
If somebody helped you, don't make a post to say "Thanks". Just click on the "Thanks" button found on the left of every post. It's the only purpose of the Thanks button which helps to keep the thread clean of common posts which are just made to say: 'Thank you', 'It helped a lot, Thanks' and such others.
Thanks mate. I managed to install it on CM11 for Galaxy Mini/Pop Plus/Next Turbo GT-S5570I (I know. Different names for different countries). The version 1.1, though. I think you updated the post just the day after I downloaded it.
Just for reference other Gapps were crashing the AOSP keyboard. With this it works just fine!
EDIT: Just installed v2.2. No issues either. The catlog is clean and AOSP works!
Mounscript link doesn't work...
aamm95 said:
Mounscript link doesn't work...
Click to expand...
Click to collapse
Checked here. Link is all fine.
I'm sorry, i was going out to the internet thru a sonicwall firewall...I've download the script.
zlock2sonyexperia
hello
bhargav97
i like your hard work for our small but good enough smarphone galaxy 5. today i was reading an article in they ported sony experia lock to their phone and that is pretty good so my question is that can we put this lock on our set bcoz i have tried and failed to put this lock on my g 5.so can you tell us whether we can use it or not, if yes than it will be great g 5 user.
thanks in advance
rztg1618:
@Bhargav97,
Can you do me a favour?
1. Your information in post #1 re: the mountscript is inaccurate - it breaks simple2ext_mod. If someone has S2E installed, they don't need this patch, as /sd-ext will be mounted by simple2ext's script.
2. The dalvik cache patch won't work with with S2E due to the order of script execution. There are two possible solutions:
a) Rename the script to "/system/etc/init.d/91linkduplicates". This will ensure that the script is executed after all userinit.d scripts (including S2E's mount script) have finished.
b) Move the script to /data/local/userinit.d.
Option B has the advantage of surviving full OTA updates... however, you will need to choose a different name for the script to make sure it is executed after /data/local/userinit.d/simple2ext. The first letter of the filename would need to start with the letters t-z (so that it's executed after simple2ext). Ideally simple2ext's script should start with a number, but since I forgot to make that change in my initial mod, it's a bit of a pain to change it now (as the app will create duplicate mount scripts)
It would probably have been a better idea to implement a userinit.d script to symlink *all* gapps files on /system (as well as the dalvik duplicates), instead of doing any symlinking in the updater-script. That would make the whole gapps sd-ext package compatible with full OTA updates (as the userinit script survives /system reformatting), and avoid the need to provide a separate dalvik cache patch. Let me know if you want me to write the script.
Greetings!
ROMs for the two variants of the Samsung Galaxy Tab A (2016, 10.1") with S Pen:
WiFi+Cellular (SM-P585Y) gtanotexllte (other variants, SM-P585, SM-P585N0, SM-P585M etc. not tested for ROM compatibility)
http://www.samsung.com/sg/tablets/galaxy-taba-p585/SM-P585YZWAXSP/WiFi only (SM-P580) gtanotexlwifi (even this has not been tested since I don't have this device)
http://www.samsung.com/us/business/support/owners/product/SM-P580NZKAXAR
Disclaimer: No warranties, stated or implied. Flashing a custom ROM might void your warranty. If you download the ROM & use it, you do so at your own risk. The author or XDA are not liable for any issues arising out of the usage of this ROM.
Different people have different requirements, so I have made available two versions of the ROM:
- Lite (heavily debloated with almost all Samsung apps removed, since I don't use them)
- Full (No debloat/no apps removed, apart from Knox)
Current version - Nougat 7.0 ROM v2 (rooted with Magisk 13.3)
Download Nougat 7.0 ROM v2 for SM-P580 WiFi only
Lite: Google Drive
Full: Google Drive
Download Nougat 7.0 ROM v1 for SM-P585Y WiFi+Cellular
Lite: Google Drive
Full: Google Drive
Previous versions - Marshmallow 6.0.1 ROMS (no further development):
Download Marshmallow 6.0.1 ROM v2 for SM-P585Y WiFi+Cellular (its somewhere between lite & full)
Mega, Mediafire, Dropbox,
Download Marchmallow 6.0.1 ROM v1 for SM-P580 WiFi only
Lite: Dropbox
Full: Dropbox
(Additional disclaimer: I don't have the WiFi only tab, so I cannot test this ROM. It underwent the same process as the WiFi+Cellular model, which I do have, so it should be okay. If you encounter any issues, please let me know.)
Pre-requisites:
Enable Developer options by going to Settings -> About device -> Software info -> click 7 times on 'Build number'.
Now go to Settings -> Developer options -> Turn on 'OEM Unlock' & 'USB Debugging' if not already done so.
Caution: The stock ROM has Verifed Boot enabled with device-mapper-verity (dm-verity) kernel feature, which prevents a successful bootup if it detects any modification to the original setup. See details. This needs to be disabled if you need to install a custom recovery, or a custom ROM.
Download dm-verity disabler:
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Download TWRP recovery:
LTE version - https://twrp.me/devices/samsunggalaxytaba101lte2016spen.html
WiFi version - https://twrp.me/devices/samsunggalaxytaba101wifi2016spen.html
Instructions - Install TWRP Recovery & flash DM-Verity disabler:
Transfer the downloaded file 'no-verity-opt-encrypt-5.1.zip' to SD card or OTG USB drive.
Download Odin 3.12.3 or any recent version.
Shutdown your tab.
Use Power+Volume Down+Home to reach the Download screen & then press Volume Up to confirm.
Use the AP section to flash the TWRP recovery.
After installing TWRP via Odin, uncheck auto reboot & manually go into TWRP to install the file 'no-verity-opt-encrypt-5.1.zip'
THEN, format /data, DON'T wipe it.
Booting to the stock ROM AFTER installing TWRP without doing this will show you a Verification failed warning, asking you to reset to factory defaults, since you basically overwrote Samsung's default recovery with TWRP, so it is cross with you.
Instructions - Install ROM:
Copy ROM to SD card or OTG USB drive (TWRP can have issues reading the internal storage)
Insert the SD card or OTG USB drive into the tab (very important!)
Press Power + Volume Up + Home & keep them pressed till you reach the TWRP splash screen
Swipe right to allow modification
Install 'no-verity-opt-encrypt-5.1.zip' from SD card or OTG USB drive
Format /data
From Advanced Wipe, wipe Dalvik/ART Cache, System, Internal Storage & Cache
Install the ROM, no need to wipe again since we already wiped & formatted in TWRP
Remember to remove the tick mark against reboot before clicking next, do NOT reboot yet!
Wipe Dalvik/ART cache (yes, again, after ROM install)
NOW, Reboot
Let the ROM boot, give it time
Install any extra applications you need
Bugs/Limitations & Workarounds:
Some APKs have been removed as part of the deknox/debloat, however, the appropriate system level modifications have not been touched in order to remain as close to stock as possible. So if you try to change a setting which relies on the removed feature, the appropriate app might force close, or it may continue to wait for the missing app. This is expected. Currently I have no plans to correct this behavior.
Software updates will not work.
Google Play Services might force close, so you will need to update it.
Samsung notes may force close out of the box. Just update it from Google Play Store. It will work after that. (zayi)
Accessibility service doesn't work on the debloated/lite ROM. Just use any third party keyboard like Swiftkey/Google Gboard etc & then enable the service for the application you desire. (zayi)
ROM features: See post # 2
Extra recommendations for ROM & App recommendations: See post # 3
XPOSED (was only tested on Marshmallow 6.0.1 ROM, NOT on Nougat 7.0):
Xposed framework v86.1 (you can then upgrade to v87)
Xposed Installer v3.1
Xposed modules & other stuff
Credits/Thanks:
IAM_TheFlash for the inspiration & advice
Assayyed for Assayyed Kitchen, using which this ROM was built, along with the numeroud features of the kitchen, including the app debloat list
zayi for the excellent feedback & solutions to the problems the ROM causes.
AndroidSword for the invaluable guide.
zxz0O0 for the download tool.
XDA community for the platform
Samsung/updato.com/Samsung Updates Live/Alfafile/MrCrab for the ROM
ROM Screenshots for SM-P585Y attached for the Home screen, Applications & Software Info.
None for SM-P580, since I don't have the tab to test.
--
Jp
Current Nougat 7.0 Releases:
SM-P585Y Changelog::
v2:
Based on stock Nougat 7.0 XSA (Australia) firmware build P585YDXU1BQF1 from June 2, 2017
Android security patch level May 1, 2017
Deodexed
Zipaligned
Rooted with Magisk v13.3
SU.d support
Busybox installed
Build.prop tweaks
Init.d support
Ext4-TuneFS scripts
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
Debloated (Lite version, see attachment v3 for details of APK's removed)
SM-P580 Changelog::
v1:
Based on stock Nougat 7.0 XAR (United States) firmware build P580UEU1BQE4 from June 13, 2017
Android security patch level May 1, 2017
Deodexed
Zipaligned
Rooted with Magisk v13.3
SU.d support
Busybox installed
Build.prop tweaks
Init.d support
Ext4-TuneFS scripts
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
Debloated (Lite version, see attachment v3 for details of APK's removed)
Old Marshmallow 6.0.1 Releases:
SM-P585Y Changelog::
v2:
Added some of the stuff back, since it was not playing nice with /data format
Investigated Xposed compatibility & added links for Xposed framework, installer & modules
Updated instructions
v1/baseline:
Based on stock firmware build P585YDXU1API1
Android security patch level September 1, 2016
Deodexed
Zipaligned
Systemless pre-root with SuperSU
Busybox installed
Build.prop tweaks
Init.d support
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
SU.d support
Heavily debloated (See attachment for details of APK's removed)
Ext4-Tune2FS scripts
SM-P580 Changelog::
v1:
Based on stock firmware build P580ZSU1APJ3
Android security patch level September 1, 2016
Deodexed
Zipaligned
Systemless pre-root with SuperSU
Busybox installed
Build.prop tweaks
Init.d support
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
SU.d support
Heavily debloated lite version & almost stock full version (See attachment for details of APK's removed in lite)
Ext4-Tune2FS scripts
Jp
Extra recommendations for the tab:
Since SM-P585Y doesn't have a huge internal storage, just 16 GB, out of which, only ~9 GB is left for the user, you may want to use adoptable storage to use your SD card as internal storage. Go to this thread by ashyx to enable adoptable storage, whereby you have the option to convert your SD card as an internal storage unit: http://forum.xda-developers.com/galaxy-tab-a/how-to/patch-adoptable-storage-enabler-t3507387. The only caveat is that it formats & converts the whole SD card for use as internal storage & you won't be able to pop the card out & use it on your PC to transfer data, you will need to transfer data via the USB cable just like you would for the internal storage.
Go to Developer options & turn off Windows, Transitions & Animator animations. It would visibly speed up your tab slightly by cutting down on the slight delay introduced by the animations.
App recommendations (Free in Play Store):
'Xodo PDF Reader & Editor' for PDF annotation
'INKredible - Handwriting Note' for taking notes with guaranteed beautiful handwriting
Jp
Can we instal xposed in these ROM?
Gosh, saw a stock rom for the s pen model and got excited, until I saw it was the P585 only =[
Merry Christmas LTE guys!
zayi said:
Can we instal xposed in these ROM?
Click to expand...
Click to collapse
I went too far in my debloating, which doesn't play nice with formatting /data, so I've added some stuff back & christened the new ROM v2. Uploading, should be up shortly. I've installed Xposed on it. Looks okay.
EDIT: New ROM v2 uploaded.
I don't use Xposed much, however, I was able to install:
Xposed framework ver 86.1
Xposed Installer ver 3.1
Modules: Xposed edge & Gravitybox (MarshMallow)
It seems to be behaving itself, don't see any errors in my rudimentary testing.
Jp
veekay said:
Gosh, saw a stock rom for the s pen model and got excited, until I saw it was the P585 only =[
Merry Christmas LTE guys!
Click to expand...
Click to collapse
LOL, Merry Christmas, WiFi folks.
I don't think there's much difference between the WiFi & LTE models apart from the SIM module , so if you're feeling brave, you can try to install it.
Otherwise let me try to look up the WiFi ROM & cook t the same way. Your tab would have to be the guinea pig though.
By the way, which is the software version for P580? I saw this one online: P580KXU1APJ1 from November 2016. Any release after that?
Jp
japinder said:
I went too far in my debloating, which doesn't play nice with formatting /data, so I've added some stuff back & christened the new ROM v2. Uploading, should be up shortly. I've installed Xposed on it. Looks okay.
EDIT: New ROM v2 uploaded.
I don't use Xposed much, however, I was able to install:
Xposed framework ver 86.1
Xposed Installer ver 3.1
Modules: Xposed edge & Gravitybox (MarshMallow)
It seems to be behaving itself, don't see any errors in my rudimentary testing.
Jp
Click to expand...
Click to collapse
Wow... ty so much. Download it and will try it today...thanks brother
Seems P580UEU1APH6 as far as XAR release.
BTW, does this get rid of the S pen features?
japinder said:
LOL, Merry Christmas, WiFi folks.
I don't think there's much difference between the WiFi & LTE models apart from the SIM module , so if you're feeling brave, you can try to install it.
Otherwise let me try to look up the WiFi ROM & cook t the same way. Your tab would have to be the guinea pig though.
By the way, which is the software version for P580? I saw this one online: P580KXU1APJ1 from November 2016. Any release after that?
Jp
Click to expand...
Click to collapse
my Samsung Notes stopped working. and always show notification "unfortunately, samsung notes has stopped". any idea what happen?
zayi said:
my Samsung Notes stopped working. and always show notification "unfortunately, samsung notes has stopped". any idea what happen?
Click to expand...
Click to collapse
Yes, that is an acknowledged bug.
However, I recently installed Xposed framework, Xposed installed & a couple of Xposed modules. Afterwords I again applied the dm-verity & no-ecryption zip and then again formatted data. Now Samsung Notes is back up running. Wondering, whether that has anything to do with Xposed, or the data format...
If you haven't setup a ton of apps, maybe you can just try to install the zip & format data to see if Samsung Notes works... However, it will mean starting from scratch again in terms of setting up your tab...
Jp
japinder said:
Yes, that is an acknowledged bug.
However, I recently installed Xposed framework, Xposed installed & a couple of Xposed modules. Afterwords I again applied the dm-verity & no-ecryption zip and then again formatted data. Now Samsung Notes is back up running. Wondering, whether that has anything to do with Xposed, or the data format...
If you haven't setup a ton of apps, maybe you can just try to install the zip & format data to see if Samsung Notes works... However, it will mean starting from scratch again in terms of setting up your tab...
Jp
Click to expand...
Click to collapse
Sry. after i update samsung notes via google play store that fix those problem. ty for your time. nice job for these rom.
zayi said:
Sry. after i update samsung notes via google play store that fix those problem. ty for your time. nice job for these rom.
Click to expand...
Click to collapse
LOL, that must have been it for me too, updating apps.
Thanks for the confirmation, updated first post.
Jp
Can you try to go to accessibility>vision>tts . I need to activate accessibility of some apps, but can't get through these tts. Make setting force close
zayi said:
Can you try to go to accessibility>vision>tts . I need to activate accessibility of some apps, but can't get through these tts. Make setting force close
Click to expand...
Click to collapse
Sorry, I removed TTS in my haste to debloat the ROM, since I don't use it.
I guess if you do need it, maybe I can upload another version of the ROM with zero debloat, which doesn't have any apps removed. It would be same as stock in terms of apps, but you still have the other features.
Let me know.
Jp
japinder said:
Sorry, I removed TTS in my haste to debloat the ROM, since I don't use it.
I guess if you do need it, maybe I can upload another version of the ROM with zero debloat, which doesn't have any apps removed. It would be same as stock in terms of apps, but you still have the other features.
Let me know.
Jp
Click to expand...
Click to collapse
OK I will wait for it. Ty
veekay said:
Gosh, saw a stock rom for the s pen model and got excited, until I saw it was the P585 only =[
Merry Christmas LTE guys!
Click to expand...
Click to collapse
veekay said:
Seems P580UEU1APH6 as far as XAR release.
BTW, does this get rid of the S pen features?
Click to expand...
Click to collapse
I've created two ROMs for the WiFi model, based off the build P580ZSU1APJ3:
- Lite (heavily debloated, with almost all Samsung apps removed, Air Command removed too)
- Full (only Knox removed, all other apps remain as it is, Air Command works)
So now both 2016 S-Pen tab models are equally represented. No partiality any longer.
Jp
Appreciate the work. Is it possible to have a lite version with just the s-pen functionality left in or is that dependent on too many other apps? Or, is there an apk that can be downloaded to re-enable air command?
japinder said:
I've created two ROMs for the WiFi model, based off the build P580ZSU1APJ3:
- Lite (heavily debloated, with almost all Samsung apps removed, Air Command removed too)
- Full (only Knox removed, all other apps remain as it is, Air Command works)
So now both 2016 S-Pen tab models are equally represented. No partiality any longer.
Jp
Click to expand...
Click to collapse
veekay said:
Appreciate the work. Is it possible to have a lite version with just the s-pen functionality left in or is that dependent on too many other apps? Or, is there an apk that can be downloaded to re-enable air command?
Click to expand...
Click to collapse
LOL, thanks. Its just selective debloat. Just more work, that's all.
These are APK's, but system apps, not user apps, so normal install like other apps may not work as intended, might be more messy, even if it works.
Air Command, the feature to pop up a selection of commands targeted towards the S Pen, is not a feature I find terribly useful. When I take out the S Pen, I use it for two purposes:
- Take handwritten notes with INKredible app.
- Annotate PDF's with Xodo.
Air Command just gets in the way, I have to dismiss it, causing one more S Pen click or back button key press. And keeps on showing the translucent button, which I can sometimes press inadvertently. Apart from Clock (I just like the white icon by Samsung, instead of horrible pale purple clock icon by Google), I just replace all the Samsung apps with the ones by Google. Hence the heavily debloated approach. I understand, Samsung Notes, with it OneNote like functionality might appeal to some people, the automatic prompt might appear cool too, even if its not for me.
Let me see what I can do, maybe a third, not-so-lite & not-so-full ROM. No ETA's though.
Jp
The tablet is my wifes and she uses this feature on the tab and her note - wouldn't be able to convince her to switch to a slimmed down rom without it
japinder said:
LOL, thanks. Its just selective debloat. Just more work, that's all.
These are APK's, but system apps, not user apps, so normal install like other apps may not work as intended, might be more messy, even if it works.
Air Command, the feature to pop up a selection of commands targeted towards the S Pen, is not a feature I find terribly useful. When I take out the S Pen, I use it for two purposes:
- Take handwritten notes with INKredible app.
- Annotate PDF's with Xodo.
Air Command just gets in the way, I have to dismiss it, causing one more S Pen click or back button key press. And keeps on showing the translucent button, which I can sometimes press inadvertently. Apart from Clock (I just like the white icon by Samsung, instead of horrible pale purple clock icon by Google), I just replace all the Samsung apps with the ones by Google. Hence the heavily debloated approach. I understand, Samsung Notes, with it OneNote like functionality might appeal to some people, the automatic prompt might appear cool too, even if its not for me.
Let me see what I can do, maybe a third, not-so-lite & not-so-full ROM. No ETA's though.
Jp
Click to expand...
Click to collapse
Hello, This is my first MOD which actually works.
Visit my new website here for detailed info: https://chetzjain1215.wixsite.com/enhancexp (currently the site isn't optimised for phones, but working on it. )
Code:
I am not responsible if you brick your devices or other issues because of my MOD.
Do some research or ask me if you have any concerns about it.
Q:So, What is this thing?
A: It basically Replaces stock LineageOS apps with the Google apps.
Q:Why do we need this?
A: If you're using Nova launcher or Pixel launcher i'm sure you would have come across ''force 3D touch". That thing doesn't take place in Stock lineage apps like Phone, Messaging or Clock etc. Also the UI of Calendar app isn't good as compare to Google calendar app, however Google apps is the solution.
Q:What else does it do?
A: It will install Sony Music player (Beta version), trust me it isn't bloatware but something better than Eleven (stock lineage music player), also it adds a nice unlock sound effect.
Features: 1) Removes Lineage apps: Calendar, Clock, Eleven, Calculator, Messaging, Contacts and Phone.
2) Adds Google apps of: Calendar, Clock, Calculator, Messaging, Contacts and Phone, Beta version of Sony Music.
3) Unlock Sound effect from MIUI.
**CAUTION**: I've tested the MOD only with Official RR 5.8.3 and with NANO open gapps package.
THINGS YOU SHOULD DO AFTER INSTALLING: 1) Set Phone as default app by going in Settings>Apps>Setting icon (Top right corner), under default, select Phone app. That's it.
**Installation For recovery flashing***
1) Flash your Favourite (7.1.1/7.1.2) ROM and then flash Nano Gapps.
2) Go back in TWRP and select "MOUNT" and tick system.
3) Select my MOD and flash and reboot.
**Installation For recovery flashing***
1) Take a backup seriously.
2) Open magisk and select my module and flash it.
Download for Stable Recovery Flashing: STABLE VERSIONS
Download for Beta Recovery Flashing: BETA VERSIONS
Download for Magisk flashing: not supported anymore
Source: Github
Credits :LineageOS
: @nicesoni_ash
:Google
:Me
(download the zip file which has high number, if possible.)
Current Version-
Stable: V16.0
Beta: V15.1
Some screenshots!
Changelogs:
To See older version of changelogs, Visit here! Older Changelogs
*For Mod*
V16.0
-
1) Fixed Clean and Dirty flash option.
2) Updated apps. (Phone, Calendar)
3) Updated Sony Music to latest beta.
4) Selecting Dirty flash will redirect you on installation.
5) Selecting Clean flash will be normal as before. (Delete apps and then installation)
6) Used Flux font.
7) Fetch system information and shows you.
8) It will show you what cpu you running, and warning above.
9) Align many texts.
10) Added option whether you want bubble patched dialer in MISC
11) Updated Changelog and Credits txt
12) Used new icons for clean and dirty flash option
13) Remove conflicting lines during installation
14) It will show the app version no.
15) Done many underhood changes
16) some small text and other fixes.
Bugs: so far none
#Enjoy!
Please consider reading some frequently asked questions before flashing it.
FAQS
look nice. btw what icon pack is that in the screenshot?
keaheng said:
look nice. btw what icon pack is that in the screenshot?
Click to expand...
Click to collapse
Thank you! and this one
Update the site for mobile, still there are many problems with it. Like slideshow and other problems like unable to see some texts in last pic. And update coming soon
New Update is up. https://www.androidfilehost.com/?fid=673368273298951161
If anyone here facing issue like phone app unable to see in app drawer, then it means you probably have dirty flash my new version of mod over old one. In order to remove this issue, either do clean flash or open root browser go in system/priv-app/GoogleDialer and remove the older version, it's something with ''8.0.1...'' and reboot
New stuff coming, tested well before implementing.
New update: https://www.androidfilehost.com/?fid=745425885120732628
So i finally "tried" to make git, i'm still new so dunno know much stuffs. but you can check the mod git here: https://github.com/chetz1215/Enhance-Experience-Global
I was not able to upload systen folder cause of bad internet connection but will do once it's stable
Nice work ? i will give feedback when i try it
Only for OP3T or other devices can try as well ?
ProudRed said:
Only for OP3T or other devices can try as well ?
Click to expand...
Click to collapse
For everyone
Some new stuffs may come soon, like mounting automatically and some apps from android O dev preview.
Clock app crashed. BTW i'm on sultan linage rom
Noob02 said:
Clock app crashed. BTW i'm on sultan linage rom
Click to expand...
Click to collapse
Please specify more, is it your first time you installed this mod? If you have flashed my mod before too, either do clean flash or go in system/app and search for related words to clock, there must be conflicting apps.
Clean cache n force stop.. now work well. Thanks ,bro?
New Update https://www.androidfilehost.com/?fid=961840155545575989