Cannot Unlock BL [DONE IT] - XPERIA X10 Q&A, Help & Troubleshooting

Solved!!
Im on Achotjan_Stock_Remplacement_Rom | X10i_2.3.3_6.0.B.0.743_V2.0
http://forum.xda-developers.com/showthread.php?t=1690148
Here is the log from flashtool:
11/051/2012 23:51:06 - INFO - <- This level is successfully initialized
11/051/2012 23:51:06 - INFO - Flashtool Version 0.8.6.0 built on 2012-06-13 08:08:54
11/051/2012 23:51:06 - INFO - You can drag and drop ftf files here to start flashing them
11/051/2012 23:51:11 - INFO - Device disconnected
11/051/2012 23:51:14 - INFO - Device connected with USB debugging off
11/051/2012 23:51:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
11/051/2012 23:51:15 - INFO - Device connected with USB debugging on
11/051/2012 23:51:15 - INFO - Connected device : X10
11/051/2012 23:51:15 - INFO - Installed version of busybox : BusyBox v1.19.3-Stericson (2011-11-01 20:22:18 CDT) multi-call binary.
11/051/2012 23:51:15 - INFO - Android version : 2.3.3 / kernel version : 2.6.29-00054-g5f01537
11/051/2012 23:51:16 - INFO - Root Access Allowed
11/051/2012 23:51:19 - INFO - Please connect your device into flashmode.
11/051/2012 23:51:24 - INFO - Device disconnected
11/051/2012 23:51:40 - INFO - Device connected in flash mode
11/051/2012 23:51:40 - INFO - Opening device for R/W
11/051/2012 23:51:40 - INFO - Reading device information
11/051/2012 23:51:40 - INFO - Phone ready for flashmode operations.
11/051/2012 23:51:40 - INFO - Flashing loader
11/051/2012 23:51:46 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE
11/051/2012 23:51:46 - INFO - Start Reading property
11/051/2012 23:51:46 - INFO - Reading TA finished.
11/051/2012 23:51:46 - INFO - Ending flash session
11/051/2012 23:51:46 - INFO - Found semcSL
11/051/2012 23:51:46 - INFO - You can now unplug and turn on device, then plug it again
11/051/2012 23:51:46 - INFO - Waiting for device
11/051/2012 23:51:46 - INFO - Device connected in flash mode
11/051/2012 23:51:48 - INFO - Device disconnected
11/051/2012 23:51:49 - INFO - Device connected in flash mode
11/052/2012 23:52:03 - INFO - Device disconnected
11/052/2012 23:52:19 - INFO - Device connected with USB debugging off
11/052/2012 23:52:19 - INFO - For 2011 devices line, be sure you are not in MTP mode
11/052/2012 23:52:21 - INFO - Device disconnected
11/052/2012 23:52:23 - INFO - Device connected with USB debugging on
11/052/2012 23:52:34 - INFO - Pushing C:\Flashtool\custom\features\UnlockBL\files\qsd8250\qsd8250bootwrite_semcSL to /data/local/tmp
11/052/2012 23:52:34 - INFO - Pushing C:\Flashtool\custom\features\UnlockBL\files\qsd8250\mapper_2.6.29-00054-g5f01537.ko to /data/local/tmp
11/052/2012 23:52:34 - INFO - Pushing C:\Flashtool\custom\features\UnlockBL\files\qsd8250\fixPart to /data/local/tmp
11/052/2012 23:52:34 - INFO - Running runfixPart as root thru sysrun
11/052/2012 23:52:34 - ERROR - Cannot apply fixPart. Aborting
11/052/2012 23:52:35 - INFO - Running runClean as root thru sysrun
someone can help me?
Thanx, Itamar

---

How did you unlock your bootloader?
Im not at a pc so cant check your link or give you one (edge network is fun)
Google this "xperia x10 unlocking bootloader"
First result xda how to
Make sure you test what files you need
Read it very carefully!
I doubt whatever rom you use makes a difference
Im sorry that i could not provide anymore help the guide just says it all i suppose!
Good luck!
EDIT; incase you do not want to unlock boot loader then use roms for locked bootloader!!
If not sorry you just didnt provide that much info
Sent from my X10i using xda premium

---

fterger the
@Itamar2
You can see bootloader unlocking threads here (bootloader bypass) and here (bootloader unlocking).
hope it helps... cheers :fingers-crossed:

---

Need Stock kernel...
Need stock kernel... you may need this
http://www.sonymobile.com/gb/tools/update-service/
Root via FlashTool 0.8.6
Unlock bootloader plugin will be available under plugin in FlashTool 0.8.6
Thanks.

---

Iv read all of the "how to unlock BL" guides on XDA, and i did it thrwo flashtool, i also added the log and it is defrent then the one on the guide.
Any solutions?
Sorry for my bad english XD
Sent from my X10a using xda app-developers app

---

Identify your simlock certificate status. download S1tool here.
- open S1tool and click "DO JOB" on the right.
- turn off your phone, and connect USB cable while pressing BACK button (right button) of your phone.
- check your phone's simlock certificate. if identified as "NOT RECOGNIZED", you can follow the_laser's bootloader bypass method.
How to...
- download qsd8250.7z (courtesy of the_laser).
- flash your phone with standard/generic 2.1 firmware. (PLEASE DO MAKE A BACK-UP BEFORE FLASHING)
- extract qsd8250.7z and run "qsd8250_semc.cmd" from that folder.
- turn on the phone, enable USB debugging and connect the USB cable. just follow the command. you'll see message below
Code:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
1464 KB/s (585731 bytes in 0.390s)
error: protocol fault (no status)
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights.
192 KB/s (3087 bytes in 0.015s)
success
Waiting ...
Getting ROOT rights.
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
504 KB/s (8064 bytes in 0.015s)
Second, we need to write semcboot ;)
1531 KB/s (588236 bytes in 0.375s)
successfully wrote 0001ff80
Press any key to continue . . .
if you had the same message... you had bypassed the bootloader. it's now unlocked.
- to make sure it's already been unlocked, runt S1tool again.
- the phone should be running S1_EROM ver "r8A022" (with uncapitalized letter 'r')
NOTE: This procedure is an excerpt from the_laser's thread above. I hope I had made it easier for you. This method worked on mine.
CREDITS:
- the_laser
- 9Lukas5
- Androxyde

---

The s1tool says i can unlock my BL....
Thts why i tride flashtool...
Sent from my X10i using xda app-developers app

---

try this cmd programe......... http://forum.xda-developers.com/showthread.php?t=1759264
lol i have to admiit, even though i made the video, i forgot the names of the softwares. i think it is obvious from the vid. just google it after watching

---

Itamar2 said:
The s1tool says i can unlock my BL....
Thts why i tride flashtool...
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
try to flash standard/generic 2.1 firmware and unlock BL thru flashtool then.
optionally, you can do the bypass method via "qsd8250_semc.cmd" if flashtool failed.

---

Where can I get generic 2.1?
Sent from my X10i using xda app-developers app

---

Itamar2 said:
Where can I get generic 2.1?
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
found this on Androxyde's thread provided above.
X10i Generic 2.1update1 build 2.1.A.0.435

---

Thanks, and do i flash it with xrecovery? And after the unlock (with 2.1) how do i flash fxp CM7.2?
Sent from my X10i using xda app-developers app

---

helpful tips all about flashtool functions -> http://forum.xda-developers.com/showpost.php?p=19684846&postcount=2
flashing guide CM7.2 -> http://forum.xda-developers.com/showpost.php?p=17998666&postcount=12446
NOTE: after unlocking BL, you should upgrade to 2.3 firmware to be able to flash CM7.2

---

BordenG said:
helpful tips all about flashtool functions -> http://forum.xda-developers.com/showpost.php?p=19684846&postcount=2
flashing guide CM7.2 -> http://forum.xda-developers.com/showpost.php?p=17998666&postcount=12446
NOTE: after unlocking BL, you should upgrade to 2.3 firmware to be able to flash CM7.2
Click to expand...
Click to collapse
How to flash the 2.1 firmware ? ( the links have no info abote that... )
How to upgrade and keep the unlock ?
Sent from my X10i using xda app-developers app

---

Itamar2 said:
How to flash the 2.1 firmware ? ( the links have no info abote that... )
How to upgrade and keep the unlock ?
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
you'll use flashtool for flashing .ftf firmwares.
use recovery for flashing .zip file. ie roms, add-ons etc.
CM7.2 should be flashed with CWM recovery, which you could also install via flashtool.
just refer in the thread provided above. you'll get used to it..
unlocked BL should never get locked unless you do so.
ganbatte!!!

---

Ok, but how do I flash with flashtool - is it like flashing kernel?
And to update I do so with SE PC-companion?
Sent from my X10i using xda app-developers app

---

yes. same process as what you did in your first post.
and make sure you already had generic 2.1 and 2.3 downloaded and copied into C:\Flashtool\firmwares folder. you should see identical files below when you open flashtool, clicked on thunder icon (utmost left button) and chosen flashmode.
then connect your phone in flashmode when prompted (phone turned off, pressing back button while connecting USB cable).
RECAP:
- flash generic 2.1
- root, if not rooted (you can hover your mouse on every icon to identify each)
- unlock bootloader (clicking Plugins-> bootloader ->run)
- install recovery (cross icon), you can install both 0.3 and CWM5. if you want to.
- flash generic 2.3
- flash FXP kernel
on this part, I assumed you already had your CM7.2 rom (.zip) on your SD card.
- boot into CWM recovery (via flashtool or pressing volume down button when blue lights on during kernel boot)
- in CWM recovery mode, make a factory reset. format system in mounts and storage.
- mount data, cache, system, sd-ext (you should see "unmount data" and so on...)
- install .zip on sd-card, and choose the rom in .zip file.... wait for installation.
- reboot, if everything goes right...congrats! you already had a custom rom installed... :good: